Search Results

Search found 148 results on 6 pages for 'dandy'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

• Low-profile, PCI Express, x1 video card with VGA-out?

  - by Dandy

  I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

  Read the article

• invalid / unauth Product Key (10 replies)

  I recently purchased a tablet PC (Fujitsu ST5011D) on ebay. In the item description, it stated that "I just installed Windows TabletXP, but it needs to be activated." Fine and dandy, valid COA on the back per auction images. Well. Upon attempting activation, I was informed that I had an "invalid product key". I downloaded and ran Magical Jellybean to get the PK from within the system itself, and i...

  Read the article

• invalid / unauth Product Key (10 replies)

  I recently purchased a tablet PC (Fujitsu ST5011D) on ebay. In the item description, it stated that "I just installed Windows TabletXP, but it needs to be activated." Fine and dandy, valid COA on the back per auction images. Well. Upon attempting activation, I was informed that I had an "invalid product key". I downloaded and ran Magical Jellybean to get the PK from within the system itself, and i...

  Read the article

• Is Content Really a Kind of SEO?

  Let's say that someone is searching for a dedicated server, and winds up on your page. That's all good and dandy, but now you've got to keep them there.

  Read the article

• php get, random records, and the back button

  - by Andrew Heath

  My site has a library full of games, nations, game scenarios, etc. library.php is given a type=___ & id=___ for example library.php?type=scenario&id=ABCD001 library.php saves the id to a session variable and loads an include appropriate for the type This all works just dandy. Now, I wanted to give my users the option of pulling up a random scenario. To do that, I added a special id to the logic within lib-scenario.php (the include) such that if given library.php?type=scenario&id=random the include knows to run an alternate query for a random record rather than for the actual id This also works just dandy... unless someone hits the Random Scenario button two+ times in a row, and decides that the previous random scenario was way cooler, I want to go back to that. Because the http address is always directory/library.php?type=scenario&id=random no matter how many times you click Random Scenario, as soon as you click back you'll be taken to the last page with an alternate address you visited. So, if you start at the Home page, and hit Random Scenario 35 times, then decide the 34th one was what you wanted and click BACK, you'll be put back onto the Home page. I must admit this was not a problem I had anticipated. One of my testers was the first to have the urge to back-up in the random scenario stream and here we are. How can I add back-up functionality to my script?

  Read the article

• Sendmail ignoring parameters

  - by André

  We're sending ~60k emails to non-local addresses with sendmail and I manually set the -f flag to [email protected]. This all works fine and dandy when I limit my PHP script to 5000 addresses. If I remove the limitation, sendmail ingnores the parameters and sends all emails with a reply-to and return-path of [email protected]. I'm sleeping in between each email for 500ms, that should not be the problem.

  Read the article

• What's the point of 6.0GB/s SATA harddrives?

  - by earlz

  So I've recently been seeing on the higher grade motherboards SATA 6.0gb/s ports. That's all fine and dandy. Extra room for expansion.. Now, my question is why are people already selling SATA 6.0GB/s port containing harddrives when it is already known that harddrives aren't even saturating 3.0GB/s(even server grade). What is the point of this?

  Read the article

• Making Thunderbird leave messages on server

  - by Malfist

  When I setup my GMail account with Thunderbird years ago, it had a specific option for GMail. I choose it and everything worked fine and dandy. However, whenever Thunderbird checks the mail for me, it moves my mail from the inbox (on GMail) to the "All Mail" folder. How can I prevent it from doing this?

  Read the article

• Making thurderbird leave messages on server

  - by Malfist

  When I setup my gmail account with thunderbird years ago, it had a specific option for gmail. I choose it and everything worked fine and dandy. However, whenever thunderbird checks the mail for me, it moves my mail from the inbox (on gmail) to the "All Mail" folder. How can I prevent it from doing this?

  Read the article

• how many tables can an MS SQL database hold?

  - by Peter Turner

  I've ran into this cryptic statement for SQL Server: Files Per Database 32,767. What does that mean exactly? Is there a maximum number of tables for a given version of SQL Server. We try to support SQL Server post 2005 32-bit and 64-bit. So if anyone has a handy dandy table they use to figure out how many tables they can have per DB for Microsoft SQL Servers I'd heartily appreciate seeing it.

  Read the article

• WCF Ria Services For Real

  In my previous post I discussed creating the database and tables for the Silverlight HVP configuration data.  All that was great, and worked just dandy until it was time to get the data from the database server to the application running on the client. But, I thought, How hard can it be?  Ive done a few mini-tutorials should be straight-forward And it was sorta. Getting Going The steps are pretty straight forward: Create an entity data model that corresponds to the tables ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• WCF Ria Services For Real

  In my previous post I discussed creating the database and tables for the Silverlight HVP configuration data.  All that was great, and worked just dandy until it was time to get the data from the database server to the application running on the client. But, I thought, How hard can it be?  Ive done a few mini-tutorials should be straight-forward And it was sorta. Getting Going The steps are pretty straight forward: Create an entity data model that corresponds to the tables ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Finding an A* heuristic for a directed graph

  - by Janis Peisenieks

  In a previous question, I asked about finding a route (or path if you will) in a city. That is all dandy. The solution I chose was with the A* algorithm, which really seems to suit my needs. What I find puzzling is heuristic. How do I find one in an environment without constant distance between 2 nodes? Meaning, not every 2 nodes have the same distance between them. What I have is nodes (junctures), streets with weight (which may also be one-way), a start/finish node (since the start and end is always in the same place) and a goal node. In an ordinary case, I would just use the same way I got to goal to go back, but since one of the streets could have been a one-way, that may not be possible. The main question How do I find a heuristic in a directed graph?

  Read the article

• System Error Report /usr/bin/Xorg

  - by jimirings

  I have recently begun getting a System Error Report message when I start up my computer. I haven't installed anything recently other than the usual updates or done anything else out of the ordinary. The details for the report just say "/usr/bin/Xorg". It doesn't seem to be causing me any problems beyond the annoying error message. I saw these questions regarding this problem: System Error Report - Xorg How do I enable or disable Apport? That's all dandy for getting the message to go away, but I'd rather fix the problem. Any ideas how I can make that happen? I'm running Ubuntu 12.04 on a Toshiba NB505. I am, of course, happy to provide any other relevant information that may be needed. Thanks in advance.

  Read the article

• Connected to wifi, but quits loading pages after a random amount of time

  - by Collin

  I'm using Ubuntu 12.10, on a TOSHIBA Satellite L755 laptop, and using a Cradlepoint MBR-1000 wireless router. The wifi supposedly works fine on my sisters' and mom's laptops, and my dad uses a wired connection through the router. Nobody else has the problem. It shows that I'm connected and everything. The network manager GUI shows that everything is going just dandy... but it's not. I'll be able to load a page or two, then I have to disconnect, and reconnect to the router to get it to work again for a couple minutes. I noticed when I was downstairs, close to the router, this problem seemed to go away (at least, I was connected for a couple of hours without running into this problem). When I run ping -n 8.8.8.8 it shows this while the connection is still running fine 64 bytes from 8.8.8.8: icmp_req=1187 ttl=47 time=665 ms and whe

  Read the article

• How do I keep track of modifications to a new server?

  - by eveo

  I purchased a server for the sole purpose of familiarizing myself with the CLI so I don't get royally screwed when I enter a real development environment. However, I have some questions. I've managed to SSH into my server, all is fine and dandy, installed LAMP too which went flawlessly. Now I'm wondering, the more changes I do, the more cluttered my server will become. Can I revert changes? I don't want to keep customizing things and installing things and just having a cluttered server overall. Where can I track changes to my system?

  Read the article

• Recently purchase a Linode server. Wondering how to keep track of modifications

  - by eveo

  I purchased a server for the sole purpose of familiarizing myself with the CLI so I don't get royally screwed when I enter a real development environment. However, I have some questions. I've managed to SSH into my server, all is fine and dandy, installed LAMP too which went flawlessly. Now I'm wondering, the more changes I do, the more cluttered my server will become. Can I revert changes? I don't want to keep customizing things and installing things and just having a cluttered server overall. Where can I track changes to my system?

  Read the article

• Should Scala IDE Worksheets be part of your open git repository?

  - by JacobusR

  Those familiar with Scala IDE will know about the great testing environment offered by the Scala Worksheet. You can scribble and scratch, much like in the REPL, but with all the goodness added by the IDE as a whole (refactoring, saving, error checking, etc). When you create a worksheet, it is created with the .sc extension, and also creates a artifact under a hidden directory called .worksheet. This is all fine and dandy, but should one include these in your public .git repositories? People who does not use Scala IDE (or older versions) may find these files confusing. On the other hand, making some of your experiments public to developers who are using Scala IDE, may give them a quick start into experimenting and learning the project.

  Read the article

• Can one instance of a WCF service pass work on to another instance where this 2nd instance would rep

  - by Matt

  Let's say I have 2 instances of the same web services. Is there a way that I can have the second instance of the web service perform a task at the behest of the first instance of the WCF service and reply directly to the original requester? I could code this and include logic in WCF-A to contact WCF-B under the right conditions and then passback the result, but returning to the requester directly from WCF-B would be easier. Also, I made a handy dandy chart.

  Read the article

• Django ModelForm for Many-to-Many fields

  - by theycallmemorty

  Consider the following models and form: class Pizza(models.Model): name = models.CharField(max_length=50) class Topping(models.Model): name = models.CharField(max_length=50) ison = models.ManyToManyField(Pizza, blank=True) class ToppingForm(forms.ModelForm): class Meta: model = Topping When you view the ToppingForm it lets you choose what pizzas the toppings go on and everything is just dandy. My questions is: How do I define a ModelForm for Pizza that lets me take advantage of the Many-to-Many relationship between Pizza and Topping and lets me choose what Toppings go on the Pizza?

  Read the article

• Grid 960 bug in Internet Explorer 8?

  - by mg1075

  If you go to the "Variable Grid System" generator and have: column width = 20 number of columns = 12 and gutter width = 60 ...the system provides a content width of 900 and a full width of 960. http://www.spry-soft.com/grids/ Now, this is all fine and dandy in Firefox, Chrome, and even IE6, but when you load those settings in IE8, you end up with the actual full width as 1000px, not 960px. Has this issue been encountered before?

  Read the article

• Sub-viewController doesn't get autorotation notifications, bug?

  - by Shizam

  If I have a view (and its controller) and I override the willAnimateRotationToInterfaceOrientation method so I can respond to autorotation events everything works fine and dandy. Now if I create another viewController and add its view to the first viewController's view via: [firstViewController.view addSubview:secondViewController.view] The secondViewController's willAnimateRotationToInterfaceOrientation method isn't called. What gives? Thanks, Sam

  Read the article

• How to show Time Remaining when playing a song in my iPhone app?

  - by RexOnRoids

  I use AVAudioPlayer to play an mp3 file to a user within my iPhone app. This all works fine and dandy. I even update a PLAY/PAUSED button depending on the state of the player. But it would be nice to know how much longer the song will play. So How do I show the time remaining?

  Read the article

• File uploading with ColdFusion, too big of file timing out?

  - by knawlejj

  A client has the admin ability to upload a PDF to their respective directory and have it listed on their website. All of this works dandy until a PDF reaches a certain file size that makes the server time out. This causes an error and the file uploaded will not succeed. As mentioned in the title, we are using ColdFusion with a command. Is there any java/jquery/flash modules or applications that could resolve this issue?

  Read the article

• Google Apps email forwarding to a mailbox within the same domain

  - by Anton Gogolev

  It's either me or this feature doesn't work. I have a Google Apps account (non-paid) for example.com set up fine and dandy. Among other addresses, there are support@ and employee@. Now I want to set up Filters such that all mail sent to support@ should be forwarded to employee@. Note that this is not POP3/IMAP forwarding: I really need to do this with filters. The problem is as such: when an email arrives to support@ it is never ever forwarded to an address within the same domain, but is forwarded perfectly fine to some "outside" address (for instance, forwarding to my personal GMail account works flawlessly). How do I set up Filters to forward email propely?

  Read the article

1 2 3 4 5 6  | Next Page >