Search Results

Search found 23 results on 1 pages for 'dub'.

Page 1/1 | 1 

• Hardware settings reviewing

  - by dino99

  Get some hardware related errors logged into dmesg: oem@dub:~$ dmesg | grep ata10 [ 1.007989] ata10: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 18 [ 1.691664] ata10: prereset failed (errno=-19) [ 1.691670] ata10: reset failed, giving up oem@dub:~$ dmesg | grep ata2 [ 0.990290] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 45 [ 1.688011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.688055] ata2.00: unsupported device, disabling [ 1.688057] ata2.00: disabled As I understand, its related to my old Seagate SATA HDD, and the PATA CDROM. These errors are quite new, so I feel that their settings (dma, write-cache, ...) have been modified by some upgrades. I've already used hdparm to set write-cache off on the HDDs. But it seems like I need to review some other setting(s) too. With oldest distro it was easy to know about the hardware settings, but now on Quantal/Precise its deeply hidden for the average user. So i would like to know how to view/modify these settings. About the CDROM reader, the problem is different: - the system don't identify it with an UUID; but only with ATAPI or by-id oem@dub:~$ dmesg|grep 'ATAPI' [ 1.308611] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 oem@dub:~$ ls -l /dev/disk/by-id/ ...... lrwxrwxrwx 1 root root 9 oct. 1 06:42 ata-TSSTcorp_CDDVDW_SH-S203D -> ../../sr0 .....

  Read the article

• inetd / xinetd not working under cygwin

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I am trying to use xinetd (or inetd) with netcat to act as a TCP proxy. This setup works on Linux without issue. Under Cygwin, either as a service or from the a Cygwin command line, the (x)inetd fails to open netcat, with the error "no such file or directory". I have tried specifying /usr/bin/nc, /usr/bin/nc.exe, /cygdrive/d/cygwin/usr/bin/nc.exe, d:\cygwin\bin\nc.exe, and a TON of other combinations of forward flashes, backslashes, Windows paths and Cygwin paths. No matter what, I get errno 2, no such file or dir. Any ideas? I need this working ASAP. Edit: I thought it may have to do with it being in d:\cygwin (lame hardcoding?) but I tested it on a machine with cygwin on C:\, problem exists there too.

  Read the article

• IIS application pool failed to respond to ping

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I have been investigating a problem that occurred on a Windows 2003 server a few days ago. there are about 15 app pools, and within a few minutes, they all produced the error below in the system log: A process serving application pool 'Pool 31x' failed to respond to a ping. The process id was '7144'. The pools were then restarted automatically, but timed out during startup, leaving all sites down. My question is: what would cause a "ping timeout" to all of the app pools around the same time, and then why would they start up too slowly? The app in each pool is a WCMS which uses the .NET 1.1 framework. It connects to a remote DB but is otherwise independent of other machines.

  Read the article

• Database problem with MS JET

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I am migrating a bunch of sites which each use an Access database (or whatever an MDB file is). If I try to load the site, I get the following error: Microsoft OLE DB Provider for SQL Server error '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied If I rename the MDB file, I get a complaint that the file does not exist, which makes sense. If the file is named correctly, the site tries to load for about 30 seconds or so, and then just fails with the above message. During this waiting period, I can see a lock file being created (and then at some point removed). The MDB file and it's parent dir have full permissions granted to all users. Given that the lock file is successfully created and removed, I don't think that this is a "real" permission issue. The OS is Windows Server 2003 SP2. I am not sure about much more detail on it's config wrt Access databases. I also don't know what version it is expected to be. VB code in question: set oConn=server.createobject("adodb.connection") DSNtemp="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\fullPathGoesHere\db\sitedb.mdb" oConn.Open DSNtemp

  Read the article

• Remove invalid SIDs from filesystem ACLs in Windows

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  Is there an automated way to traverse a filesystem and remove any ACL entries that reference invalid SIDs in any version of Windows with NTFS?

  Read the article

• Migrate 200 Domains from Win2003 DNS server to another

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  We are migrating just under 200 domains from a DNS server at another location (we have remote desktop access) to a server at our location. Is there a simple, scripted way of doing all of the zone transfers at once? Each server is Windows 2003, and the domains are internet domains, not Active Directory stuff.

  Read the article

• What is "Cloud Computing"?

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  Everywhere I turn, I keep seeing the term "cloud computing". I've done the usual drill of reading Wikipedia, searching around a bit, but it's hard to sort the wheat from the chaff. Can someone provide a buzzword-free definition of clouding computing? It's a bit of a struggle given that seemingly every tech company uses the term now, probably incorrectly.

  Read the article

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Simple Iphone XML Example

  - by dub

  Hi, I a bit overwhelmed with all of the sample code I've seen on the apple dev site. I'm looking for a simple example to show me how to load an xml file from a server into iphone. I would like to read url's from this xml file and load an image.

  Read the article

• MSBuild: automate collecting of db migration scripts?

  - by P Dub

  Summary of environment. Asp.net web application (source stored in svn) sqlserver database. (Database schema (tables/sprocs) stored in svn) db version is synced with web application assembly version. (stored in table 'CurrentVersion') CI hudson server that checks out web app from repo and runs custom msbuild file to publish/package app. My msbuild script updates the assembly version of the web app (Major.Minor.Revision.Build) on each build. The 'Revision' is set to the currently checked out svn revision and the 'Build' to the hudson build number (incremented on each automated build). This way i can match the app to a specific trunk revision also get other build stats from the hudson build number. I'd like to automate the collecting of migration scripts (updated sprocs etc) to add to the zip package. I guess by comparing the svn revision of the db that has yet to be deployed to, to the revision being deployed, i can find what db files have changed in the trunk since the last deployment to that database/environment. This could easily be achieved by manually calling the svn diff -r REVNO:REVNO command to list changed .sql files. These files could then manually have to be added to the package. It would be great if this could be automated. Firstly i'd imagine I'll have to write a custom task to check the version of the db that has yet to be deployed to. After that I'm quite unsure. Does anyone have any suggestion on how this would be achieved through an msbuild task either existing or custom? Finally I'll have to autogen a script to add to the package that updates the database version table so as to be in sync with the application.

  Read the article

• Performing complex query with Dynamics CRM 4.0

  - by dub

  Hi, I have two custom entites, Product and ProductType, linked together in many-to-one relationship. Product has a lookup field to ProductType. I'm trying to write a query to fetch Type1 products with a price over 100, and Type2 products with a price lower than 100. Here's how I would do it in SQL : select * from Product P inner join ProductType T on T.Id = P.TypeId where (T.Code = 'Type1' and P.Price >= 100) or (T.Code = 'Type2' and P.Price < 100) I can't figure out a way to build a QueryExpression to do exactly that. I know I could do it with two queries, but I'd like to minimize roundtrips to the server. Is there a way to perform that query in only one operation ? Thanks!

  Read the article

• Maintaining stored procedures in source control

  - by dub

  How do you guys maintain your stored procedures? I'd like to keep versions of them for a few different reasons. I also will be setting up cruisecontrol.net and nant this weekend to automate builds. I was thinking about coding something that would generate the create scripts for all tables/sprocs/udf/xml schemas in my development database. Then it would take those scripts and update them in source control every couple hours.... Ideally, I'd like to make this some sort of plugin/module for cruisecontrol.net. Any other ideas?

  Read the article

• Codec Problems with trying to edit videos with VirtualDub

  - by Roy Rico

  So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in virtual dub AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

  Read the article

• Codec Problems with trying to edit videos with VirtualDub

  - by Roy Rico

  So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in Virtual Dub. AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried the "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

  Read the article

• Can't transfer images from a camera connected to usb2 port on a pcmcia adapter

  - by agnul

  I have an old laptop (HP OmniBook vt6200, WinXp pro, sp2) that only has usb1 ports. Transferring pictures from a digital camera is too slow, so I thought of trying one of those pccards carrying usb2 ports (D-Link Dub C2 in my case). Connecting the camera to one of the ports on the pccard, Picasa seems to freeze trying to read the camera contents, until I either disconnect the camera or the pccard. Any idea on what's wrong?

  Read the article

• Is it possible to power up ports on a USB hub from Ubuntu?

  - by James Henstridge

  I have a D-Link DUB-H7 powered USB 2.0 hub connected to my computer. Occasionally when I reboot the system, I've noticed that some of the ports on the hub get powered down: the green light next to the port is turned off, and the device attached to that port is not visible to lsusb or similar commands. Devices attached to the other ports on the hub function as normal. I am able to restore the ports by disconnecting power to the hub temporarily (from the computer, AC adapter and any devices that might provide any power such as my phone), but this is a bit of a hassle. It seems like something that might be related to power management, so is there some way you can tell the USB hub to power up through software?

  Read the article

• Is it possible to email the contents of vim using HTML

  - by brianegge

  I like to view the current differences in the source files I'm working on with a command like: vim <(svn diff -dub) What I'd really like to be able to do is to email that colorized diff. I know vim can export HTML with the :TOhtml, but how do I pipeline this output into an html email? Ideally. i'd like to be able to send an html diff with a single shell script command.

  Read the article

• Google Maps - panTo() - not working?

  - by Ryan

  Hi, I'm trying to allow a user to set their location and then have Google Maps pan to that location. I can't seem to get panTo to work, instead of updating my map it just reloads the page. Page here: http://dub[remove]step.com/events/index.html Any ideas?

  Read the article

• How to Detect Sprites in a SpriteSheet?

  - by IAE

  I'm currently writing a Sprite Sheet Unpacker such as Alferds Spritesheet Unpacker. Now, before this is sent to gamedev, this isn't necessarily about games. I would like to know how to detect a sprite within a spriitesheet, or more abstactly, a shape inside of an image. Given this sprite sheet: I want to detect and extract all individual sprites. I've followed the algorithm detailed in Alferd's Blog Post which goes like: Determine predominant color and dub it the BackgroundColor Iterate over each pixel and check ColorAtXY == BackgroundColor If false, we've found a sprite. Keep going right until we find a BackgroundColor again, backtrack one, go down and repeat until a BackgroundColor is reached. Create a box from location to ending location. Repeat this until all sprites are boxed up. Combined overlapping boxes (or within a very short distance) The resulting non-overlapping boxes should contain the sprite. This implementation is fine, especially for small sprite sheets. However, I find the performance too poor for larger sprite sheets and I would like to know what algorithms or techniques can be leveraged to increase the finding of sprites. A second implementation I considered, but have not tested yet, is to find the first pixel, then use a backtracking algorithm to find every connected pixel. This should find a contiguous sprite (breaks down if the sprite is something like an explosion where particles are no longer part of the main sprite). The cool thing is that I can immediately remove a detected sprite from the sprite sheet. Any other suggestions?

  Read the article

• Creating method templates in Eclipse

  - by stevebot

  Is there any way to do the following in eclipse? Have eclipse template a method like the following public void test(){ // CREATE MOCKS // CREATE EXPECTATIONS // REPLAY MOCKS // VERIFY MOCKS } so then I could presumably just use intellisense and select an option like "createtest" and have it stub out a method with the comments similar to the above?My problem is that often myself and other developers I know forgot all the steps we need to follow to do what we dub as a valid unit test for our application. If I could template our test methods to stub out the comments above it would be a big help.

  Read the article

• Whats the best way to stop this app crash when buttons rapidly pressed iphone obj-c

  - by dubbeat

  Hi, I'm not entirely sure why this crash is happening and I'd like to get advice on the best way to deal with it. My app has 3 buttons. Each button requests a different XML file from a server which is used to populate a table view. If I rapidly press the buttons in sequence , button 1 button 2 button3 button 1 button 2 button3 button 1 button 2 button3 the application quits. What could be causing this. Would id be in the NSURLRequest side of things or the table view population side? How would you suggest I stop this behaviour? I was going to just set a boolean "isRequesting" to true when a button is pressed and set it to false when the table view is finished populating. If any button is pressed while isRequesting is True they do nothing. Does that sound wise or is there a better way? Thanks, dub

  Read the article

• I love programming but i also want to learn hardware. [closed]

  - by user167082

  I like programming so much, i did it since i was 10, and i believe that studying computer science will make a lot of money as well as i love it. However I also want to learn hardware. I don't only want to do programming all the time without knowing the architecture of device that i program. I asked my teacher, and she said that if I get into computer science, i won't learn anything about hardware, is it true?(She graduated from u-dub) In the other hand, my math teacher told me to get into electrical engineering, since it also contain programming. The thing is that i want to emphasize my study to programming while learning some about hardware. What is major that suits me the best? Can i take some hardware courses if I get into computer science major? Thanks a lot.

  Read the article

• Fix Video timelines

  - by Josh

  So, I have been going through and riping all of my DVD's and it seems that the way to get the highest quality out of these is to have DVD Shrink de-encrypt, rip, and decompress, the DVD's. After that I usually end up with a high quality (high size) set of .vob files in a classic DVD structure. Then I use a python script that I wrote to automate the process of finding the title sequence and then combining all of the title sequences' .vob files together into one file(similar to the "copy /b" command in windows), and then changing the extension to .mpg (a more widely supported format then .vob). This allows me to get a high quality rip in about 40 min. The problem comes in playing the files. I need all of the ripped dvd's to play on my media computer using windows media center but windows media center (and vlc for that matter) all think that the video files are anywhere from 5 min. to 0 min. which is not a problem (the video will still play all the way through) but if you want to pause it, when it is unpaused the video will start all the way over (Also fast forward and rewind don't work). I suspect that it is something wrong with the way the timeline is encoded in the video file, various forums on the internet recommended using virtualdub to fix the errors. But when I try to open the file virtual dub says that the file is not in mpeg-1 encoding and may be in mpeg-2. Is there any way to fix this? PS: I am aware that there was a similar question but it hasn't had any activity for 2 months and is dealing more with wmv files.

  Read the article

1