Search Results

Search found 173 results on 7 pages for 'dyndns'.

Page 1/7 | 1 2 3 4 5 6 7  | Next Page >

• DNS add www.domain.dyndns.org record

  - by Darxis

  My config is a DNS Server on Windows Server 2008 R2. My domain is on dyndns.org dynamic IP service. This server is a DNS server and a WebServer with IIS. When someone from outside network enter the site "http://domain.dyndns.org" within a webbrowser it is ok, but when someone try to enter "http://www.domain.dyndns.org" it doesn't find any website. So I would like to add a "www." record to my DNS. I did this: Added a A-Type record pointing to my server's local IP. Added a CNAME-Type record named "www" pointing to "domain.dyndns.org." Now I can enter the "www.domain.dyndns.org" from internal network, and it works, but when I enter this address from outside it doesn't work.

  Read the article

• Setting alias for DynDNS domain

  - by metalball

  Hey all, I've created DynDNS domain for testing my local sites, and i'm having trouble with pointing to root domain. From my registrar (GoDaddy) I've created a CNAME for www to point my example.dyndns.com so going to url www.example.com I'm reaching my site. But if I'm going to example.com I'm reaching to the IP of the A record. I can't set the IP for the A record to be my IP because I have dynamic IP, and it changes constatly, and I can't point the A record to domain, only IP. When trying to create CNAME record @ to point example.dyndns.com I'm getting error "A record of a different type exists for the hostname @, could not create CNAME" The only record using the '@' host are NS record, which I can't delete, and when tried to set another NS record with @ point to example.dyndns.com, I've lost connection to my site :) So what can I do to get example.com url reach my site? Thanx!

  Read the article

• Configure EasyBox (Vodafone) with DynDNS

  - by furtelwart

  How can I configure an EasyBox A601 WLAN (from Arcor resp. Vodafone) to send the IP always to DynDNS? I entered the following: Dynamic DNS [X] Diensteanbieter (DynDNS.org) Domänenname mysupersecrethost.dyndns.org (as specified in "My Host" section Konto / E-mail myaccountname Passwort mysupersecretpassword The update does not work anymore, so that my IP is not correct. The firmware is the newest available: Firmware Version: 10.02.006 (01.12.2008-11:11:59) Thanks for any hints!

  Read the article

• DynDNS updating IP address via Cisco ASA 5505

  - by yonatan

  I'm setting up an ASA 5505 where the ISP provides a dynamic IP address (rarely changes.) I would like to start using some of the services provided by DynDNS such as Custom DNS. I've come across some information regarding Cisco Routers and DynDNS, but nothing definitive on the ASA platform. My question is whether I can configure the ASA5505 to update the IP address rather than install the DynDNS Updater software on a machine running on the LAN? Thanks

  Read the article

• self-issued exchange certificate for dyndns-url

  - by Sam

  I've got an exchange server behind behind a port to address translation firewall. The server is reachable from the internet using a dyndns-url. Now I want to sync windows phones to exchange mailboxes. To achieve this, I need to install the exchange certificate on the windows phone (send it to the phone by mail, double click). So far so good. But, as far as I can see this does only work if the certificate on my exchange server matches the dyndns-url? So I'd like to know: how do I create a self signed certificate for my dyndns-url and install it on exchange?

  Read the article

• Advantages / disadvantages of having DynDNS access on a computer vs the router

  - by Margaret

  I have a shiny new toy, a Cisco Wireless-N Gigabit Security Router with VPN (WRVS4400N). While looking through the instruction manual, I discovered that it had support for DynDNS built-in. We've currently got the DynDNS client running on one of the servers (that people SSH to, as documented in this question); but the reason for the router update is to move away from SSH to VPN. To that end, is there any difference in behaviour/functionality/maintainability to run it off the computer, as opposed to the router? Thus far, DynDNS has more or less a set-and-forget setup, but since the feature was there, I wanted to know if it was a better location for the process...

  Read the article

• Connect root domain name to dyndns?

  - by user36175

  Is there any way to connect the root of a domain name to a dyndns account? This question reveals how to get www.whatever.com to point to dyndns, but is there a way to get whatever.com itself to point to it? The domain is registered with GoDaddy if that matters.

  Read the article

• Node.js on via DynDNS

  - by Azincourt

  I have never used Node.js but since I am developing a browsergame that needs (almost) "realtime" communication, I am planning on using Node.js for this. To get started, I wanted to use a home server (normal computer) that is conntected to a dynamic IP via DynDNS. Are there the disadvantages using such a setting? What is the best way in combination with Node.js to store game status for a online game session?

  Read the article

• iptables allow dyndns domain name and auto update rules

  - by user3215

  I have registered with dyndns domain for my dynamically changing public ip address to use with iptable rules. On a server I've allowed some ports for this domain in the iptables configuration like the below entries: -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 21 -j ACCEPT But when ever my modem restarts, I couldn't connect to these allowed ports as public ip changes with modem restart and are not updated in the iptables on the server. Is there any option to automatically update iptable rules on server.

  Read the article

• How to config DLink DSL-2640T to allow access from DynDNS route to specific port on my PC?

  - by Greendog

  Hi, everyone. I think you can help me out from this little problem. I am trying to setup an Apache web server on my PC and let the other remotes to this machine via DynDNS.com. I found that DLink DSL-2640T make me confuse about how to configure the routing from http://myhostname.dyndns.org:80 to 192.168.1.13:80. At the moment when I browse the URL http://myhostname.dyndns.org, it will lead me to router's admin control panel. Could you help me out by giving your guideline or suggestion?

  Read the article

• How to use integrated support for dyndns clients in 2Wire router ?

  - by Frank

  I logged into the 2Wire web interface, and get to "Broadband Link Advanced Settings" page, how do I use it's integrated support for dyndns clients ? Under "Broadband DNS" it has "Obtain DNS information automatically" selected, under that : Manually configure your DNS information: Primary Server: Secondary Server: Domain Name: what do I need to do ?

  Read the article

• I want to set up a DynDNS service, what do I need to know?

  - by Hanno Fietz

  I'm gathering data from field devices, some of which will soon be behind a cellular-to-Ethernet gateway. Some of the devices need to be polled, and since the cellular carrier will usually assign changing IPs, I'm getting a gateway which has a Dynamic DNS client built in. I would like to have the devices call my own servers instead of a public DynDNS provider. What do I need to know to get started?

  Read the article

• How to setup a django site with Cherokee, DynDNS and virtual_env?

  - by e-satis

  I have a django project running with the dev server, and would like to try run it in a production environment. I wanted to try Cherokee for a change, so I installed it. We don't have a domain name yet, so I set up a DynDNS looking like stuff.gotdns.org. It works fine, I can see the Cherokee welcome page (so red, I first believed I got an error :-p). I ran the wizard to create a new virtual server for Django. No everything is setup, but I have nothing. Still the default Cherokee welcome page. What should I do now if I want to go to "http://stuff.gotdns.org" and see my website? What should I do now if I next want to make it available only at "http://project.stuff.gotdns.org"? Important fact, I use virtual_env, so your can call Python directly, you have to activate it first.

  Read the article

• If I ssh to a domain provided by dyndns, does my password go through them?

  - by D Connors

  I'm running Ubuntu on my work PC, and my work place provides me with a static IP address but not with a domain. It's sometimes useful for me to connect to that PC through ssh, but it's not common enough for me to instantly remember the IP number. So I set um a dyndns account, and associated a short and intuitive domain name to that IP. Here's my question, when I try to ssh to the domain, it asks me $ ssh [email protected] The authenticity of host 'something.there.foo (xx.xx.xx.xx)' can't be established. RSA key fingerprint is 'ALPHANUMERIC STRING' Are you sure you want to continue connecting (yes/no)? That surprised me a little bit. I have already registered the RSA fingerprint by connecting directly to the IP address. I thought the domain name was simply a convenient way of pointing me in the right direction (i. e. the ip address), but that message makes me think my data is actually going through their servers or something. Which one is it? Am I sending my password through someone else's server? Or is ssh just really really careful, thus warning me even if the final destination is a know host? The ssh server I'm using is the openssh-server package.

  Read the article

• Mon mini-site @ Home - avec Windows, Free, Wamp & DynDNS

  Envie d'h?berger votre petit site chez vous, sur votre ordinateur ? de partager des fichiers avec vos amis simplement ? Ce tutorial va vous montrer comment le faire en quelques clicks...

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• Godaddy hosting with dynamic ip?

  - by Razor Storm

  I bought a domain name on godaddy.com let's call it www.website.com, but my server has a dynamic ip, how do I resolve this issue? What I've tried: get a dns account at dyndns.com let's call it dns.dyndns.com, so I set up godaddy to forward the domain to dns.dyndns.com. problem: When the user goes to www.website.com, they see dns.dyndns.com in the url bar. Bad So then I set up the forwarding on godaddy to forward with domain masking, but then the problem is now that users can't even see url paths/get queries/ or hash marks anymore! `www.website.com/folder/search?id=4#ajax=4` becomes just www.website.com in the url bar. bad! What do I do?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• ddclient - wont update Invalid Keyword for 'ip' =

  - by stueng

  /etc/ddclient.conf use=web, web=checkip.dyndns.org/, web-skip='IP Address' protocol=easydns ssl=yes server=members.easydns.com login=stueng password='****' home.***.** /var/log/syslog Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: skipping update of home.***.** from <nothing> to 90.193.*.*. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: last updated <never> but last attempt on Mon Jun 4 13:01:57 2012 failed. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: Wait at least 5 minutes between update attempts. Help?

  Read the article

• Connecting to my home router web interface from work

  - by Joe

  Hi, I'm trying to connect to my home router web interface from work. I use dyndns, because I don't have a static IP at home, and it works perfectly from any other place except my workplace (update: I made a mistake, see edit below). When trying to access the web interface from work I get a "500 Server Error" with the code: SERVER_RESPONSE_RESET. I'm not trying to use any protocols such as remote desktop, I'm only trying to access the web interface. I can access any other web page from my workplace with no problems, and I think my router web interface is like any other web page, isn't it? I thought maybe my work place proxy blocks addresses of services like dyndns, so I also applied another trick. Since I have a web page on my own domain (say www.mydomain.com) which I can access from work, I tried adding a CNAME to my domain which is linked to the dyndns address (router.mydomain.com). This way if anyone enters the address router.mydomain.com from anywhere, they reach my home router web interface, and there's no way of knowing it's a dyndns address (or is there?). However, it still doesn't work from my workplace (I get the same error message). Any ides? Edit: I'm sorry to say I made a mistake earlier. I used to be able to access my home router web interface from my old workplace, and I thought it was still possible since I don't recall making any configuration changes. However, after reading the replies, I went over to my old workplace and checked, and it doesn't work from there either. I'm very sorry for giving out wrong and misleading information about my problem. So to summarize: my problem is that I can't access my home router web interface from anywhere.

  Read the article

• Custom/personal dyndns solution?

  - by Eddie Parker

  Hey: I can't think of how to make this work, but it seems like something that should be doable.. I currently own my own domain, and have been using dyndns.com's "custom DNS" to allow me to redirect 'example.com' to my website at home, which is on a dynamic IP. I've now switched over to a VPS solution which hosts my website and allows me root access to a box (me likey), which will now host "example.com" on a static IP. My question is, is it possible for me to somehow make "home.example.com" route to my box at home? Is there any software available that could automate updates to the DNS for this? Ideally I'd like not to pay a service if possible, but if that's the only way then I suppose I'll have to go that way. Thanks!

  Read the article

• How to set up www cname for free dyndns subdomain

  - by Mk12

  I have a free dyndns domain mk12.gotdns.com How can I set up a cname for www.mk12.gotdns.com to point to mk12.gotdns.com? And how can I force the www one, so that if you navigate to mk12.gotdns.com, it will go to the www one? Note: I don't mean html redirecting, but I think you can do it with url rewriting somehow, something like described here. I've seen many tutorials, but they just vaguely say that you have to enter a cname record, I have no clue what file I need to put it in. Also, please see my question http://stackoverflow.com/questions/1618998/apache-url-rewriting-wont-work about getting url rewriting to work.

  Read the article

• Accessing locally hosted webpage via public IP

  - by Mk12

  Sorry if this is in the wrong place.I don't really know anything about server-related things, but I'm really curious about this. On my mac I figured out how to make a simple web page viewable via the local ip address or computer name on the LAN, and also how to hook it up with a free hostname from dyndns.com. So the dyndns hostname points to something, how can I access it directly? Typing in the global ip address (of the router) doesn't work, but if it did, how would it know which computer to point to? There must be some way of directly accessing what dyndns hostname points to by typing in some number, right? Sorry I don't really understand how it works.

  Read the article

• Windows 8 Pro Remote Desktop issue

  - by Mike C.

  I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

  Read the article

1 2 3 4 5 6 7  | Next Page >