Search Results

Search found 13518 results on 541 pages for 'graphical interface'.

Page 1/541 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• .NET C# Explicit implementation of grandparent's interface method in the parent interface

  - by Cristi Diaconescu

  That title's a mouthful, isn't it?... Here's what I'm trying to do: public interface IBar { void Bar(); } public interface IFoo: IBar { void Foo(); } public class FooImpl: IFoo { void IFoo.Foo() { /*works as expected*/ } //void IFoo.Bar() { /*i'd like to do this, but it doesn't compile*/ } void IBar.Bar() { /*works as expected*/ } } So... Is there a way to declare IFoo.Bar(){...} in my class, other than basically merging the two interfaces into one? And, if not, why?

  Read the article

• Design For Asynchronous User Interface

  - by Sohnee

  I have been working on a integration that has posed an interesting user interface conundrum that I would like suggestions for. The user interface is displayed within a third party product. The state of the interface is supplied by calls to a service I have written. There can be small delays between the actual state changing the the user interface changing due to the polling for state by the third party. When a user interacts with the user interface, requests are sent back to my application. This then affects the state and the next state poll request will update the user interface. The problem is that the delay between pressing a button and seeing the user interface update is perhaps 1 or 2 seconds and in usability testing I can see that people are clicking again before the user interface updates, thinking that they haven't properly clicked the first time. Given the constraints (we can only update the user interface via the polling mechanism - if we updated it when they clicked, the polling might return and overwrite the change causing unpredictable / undesirable results)... what can we do to make the user experience better. My current idea is to show a message for a couple of seconds so people know their click was accepted, the message would not be affected by the state polling, so wouldn't be prematurely removed / overwritten etc. I'm sure there are other ideas out there and I'm also confident someone has a better idea that I have!

  Read the article

• Best approach for building a multiplattform graphical interface for a command-line application

  - by Werner

  Hi, I developed a command line application, whose binary runs in Linux, Windows and Mac OSX. It reads some text input files, but I realize that some special users can not handle this. I would then like to build some kind of graphical interface, where the user only finds buttons and scroll bars for selecting the input parameters, a big "run" button, and then it reads the output of the program and makes some figures. I also need that everything gets finally packed in a single file, which uses only static libraries, so the user just needs to copy the file to his/her machine and run it. I would like to know what is the best open source and multi-platform approach to do this. 10 years ago I played a bit with something similar on DEC machines, so I guess that nowadays the situation has probably improved a bit. P.S. For designing the graphical interface, I am looking for a graphical approach, where you add buttons, scroll bars with the mouse P.S. 2: the interface is really simple, just need less than 10 buttons, 5 text fields and 2 scrolla bars Thanks

  Read the article

• Using interface classes and non-virtual interface idiom in C++

  - by andreas buykx

  Hi all, In C++ an interface can be implemented by a class with all its methods pure virtual: class IFoo { public: virtual void method() = 0; }; Now I want to implement this interface by a hierarchy of classes: class FooBase : public IFoo // implement interface IFoo { public: void method(); // calls methodImpl; private: virtual void methodImpl(); }; For the class hierarchy I would like to use the non-virtual interface (NVI) idiom, to deny derived classes the possibility of overriding the common behavior implemented in FooBase::method(), but it seems that all derived classes have the opportunity to override the FooBase::method() because it is declared in the interface class. Is my observation correct? And if so are there other options to both use interface classes and the NVI idiom?

  Read the article

• Implement a generic C++/CLI interface in a C# generic interface

  - by Florent

  I have a C++/CLI generic interface like this : using namespace System::Collections::Generic; namespace Test { generic <class T> public interface class IElementList { property List<T>^ Elements; }; } and I want to implement it in a C# generic interface like this : using Test; namespace U { public interface IElementLightList<T> : IElementList<T> where T : IElementLight { bool isFrozen(); bool isPastable(); } } This don't work, Visual Studio is not able to see C++/CLI IElementList interface ! I tested with a not generic C++/CLI interface and this work. What I missed ?

  Read the article

• Can we define an interface within an interface?

  - by girinie

  Hi , I like to know can we define an interface within an interface. like interface abc { void show(); public interface xyz { void read(); } } This was question asked in interview. Any real time use of this.

  Read the article

• Implementing an interface with interface members

  - by jstark

  What is the proper way to implement an interface that has its own interface members? (am I saying that correctly?) Here's what I mean: public Interface IFoo { string Forty { get; set; } string Two { get; set; } } public Interface IBar { // other stuff... IFoo Answer { get; set; } } public class Foo : IFoo { public string Forty { get; set; } public string Two { get; set; } } public class Bar : IBar { // other stuff public Foo Answer { get; set; } //why doesnt' this work? } I've gotten around my problem using explicit interface implementation, but I'm wondering if there is a better way?

  Read the article

• Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  - by Mark S. Rasmussen

  As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Saving an interface instance into a Bundle

  - by user22241

  All I've have an interface that allows me to switch between different scenes in my Android game. When the home key is pressed, I am saving all of my states (score, sprite positions etc) into a Bundle. When re-launching, I am restoring all my states and all is OK - however, I can't figure out how to save my 'Scene', thus when I return, it always starts at the default screen which is the 'Main Menu'. How would I go about saving my 'Scene' (into a Bundle)? Code import android.view.MotionEvent; public interface Scene{ void render(); void updateLogic(); boolean onTouchEvent(MotionEvent event); } I assume the interface is the relevant piece of code which is why I've posted that snippet. I set my scene like so: ('options' is an object of my Options class which extends MainMenu (Another custom class) which, in turn implements the interface 'Scene') SceneManager.getInstance().setCurrentScene(options); //Current scene is optionscreen

  Read the article

• interface changed after restart on Xubuntu

  - by Svetlana

  Something happened a few times after using Xubuntu since 1 month ago. A few times after i restarted my laptop the interface was totally changed. The icons from the panel were different and almost everything. It looked great, it had a grey interface, very nice icons, buttons were bigger and everything looked great. I have no idea what happened, i tried to find the same interface/theme from Settings Manager but without succes. Can anyone please tell me what happened or how can i use the grey interface? It dissapeared after i restarted the laptop. Thank you

  Read the article

• Interface Builder "Simulate Interface" not working

  - by bpapa

  I am using Interface Builder to play around with some ideas. I never noticed that there is a "Simulate Interface" feature which apparently will render the nib in the iPhone simulator. So, I created a view, put one component in there (a Segmented Control), saved it, selected "Simulate Interface", the simulator launched but... nothing rendered in the simulator. Just a black screen. I thought maybe my nib wasn't complete enough, so I've tried it with all of my old nibs and I'm having the same problem with all of them. None of them render in the simulator at all. Is there some trick that I'm missing?

  Read the article

• Interface(s) inheriting other interface(s) in WCF services.

  - by avance70

  In my solution there's a few WCF services, each of them implementing it's own callback interface. Let's say they are called: Subscribe1, with ISubscribe1 and ICallback1, etc. It happens there are a few methods shared among ICallbacks, so I made a following interface: interface ICallback { [OperationContract] CommonlyUsedMethod(); } and i inherited it in all: ICallback1 : ICallback, ICallback2 : ICallback, etc. And deleted the CommonlyUsedMethod() from all callback interfaces. Now, on the service-side code, everything compiles fine and services can start working as usual. But, when I updated the service references for the client, CommonlyUsedMethod() dissapeared from the reference.cs file (the ISubscribeCallback part), and could no longer be used to send data to back to the client.

  Read the article

• Custom UIView built with Interface Builder accessible/positionable via Interface Builder

  - by Nader

  This shouldn't be this confusing. I have a custom UIView with a bunch on controls on it. UILabels, buttons, etc. I've created this Nib using Interface Builder. I want to be able to position this custom uiview on another UIView using the interface builder. How do I link my UIView custom class, to the nib? initWithCoder gets called, but I want this class to get loaded from the nib. Thanks

  Read the article

• Working with Lightweight User Interface Toolkit (LWUIT) 1.4

  - by janice.heiss(at)oracle.com

  Vikram Goyal's informative and practical article, "Working with Lightweight User Interface Toolkit (LWUIT) 1.4," shows developers how to best take advantage of LWUIT 1.4. LWUIT is a user interface library designed to bring uniformity and cross mobile interface functionality to applications developed using Java Platform, Micro Edition (Java ME). Version 1.4 offers support for XHTML, multi-line text fields, and customization to the virtual keyboard.Goyal notes in the article that, "Perhaps the most important feature of this release is the ability for LWUIT to support XHTML. Specifically, it now supports XHTML MP (Mobile Platform) 1.0, a version of XHTML designed for mobile phones. To be even more specific, it now supports CSS styling for the HTMLComponent within the LWUIT library through Wireless Application Protocol CSS (WCSS)." Read the entire article here. 

  Read the article

• Passing Interface Class as a Parameter in Java

  - by aleclerc

  I have an interface: public interface IMech { } and a class that implements it public class Email implements IMech { } and a third class that has this method implemented: public void sendNotification( Class< IMech > mechanism ){ } now I'm trying to call that method like so foo.sendNotification(Email.class); but i keep getting an exception saying: The method sendNotification(Class<IMechanism>) in the type RemediationOperator is not applicable for the arguments (Class<EmailNotification>) Shouldn't this work if it interfaces that class?

  Read the article

• Handle a More Navigation Controller in an Interface Builder based TabBar Application

  - by Thomas Joulin

  Hi, I'm still not clear on how and when to use interface builder. I have a tabbar-based application, in which I added 6 navigations controllers. Instead of having 6 tabs, I would like 3 plus a "More" tab which allows the user to configure the tabs he wants. Is there any way to do that with IB ? And if not, how can I move from IB to a code-based tabbar (provided I already set up a class TabBarController which handles shouldAutoRotate:) Thanks in advance !

  Read the article

• Oracle Solaris Cluster 4.2 Event and its SNMP Interface

  - by user12609115

  Background The cluster event SNMP interface was first introduced in Oracle Solaris Cluster 3.2 release. The details of the SNMP interface are described in the Oracle Solaris Cluster System Administration Guide and the Cluster 3.2 SNMP blog. Prior to the Oracle Solaris Cluster 4.2 release, when the event SNMP interface was enabled, it would take effect on WARNING or higher severity events. The events with WARNING or higher severity are usually for the status change of a cluster component from ONLINE to OFFLINE. The interface worked like an alert/alarm interface when some components in the cluster were out of service (changed to OFFLINE). The consumers of this interface could not get notification for all status changes and configuration changes in the cluster. Cluster Event and its SNMP Interface in Oracle Solaris Cluster 4.2 The user model of the cluster event SNMP interface is the same as what was provided in the previous releases. The cluster event SNMP interface is not enabled by default on a freshly installed cluster; you can enable it by using the cluster event SNMP administration commands on any cluster nodes. Usually, you only need to enable it on one of the cluster nodes or a subset of the cluster nodes because all cluster nodes get the same cluster events. When it is enabled, it is responsible for two basic tasks. • Logs up to 100 most recent NOTICE or higher severity events to the MIB. • Sends SNMP traps to the hosts that are configured to receive the above events. The changes in the Oracle Solaris Cluster 4.2 release are1) Introduction of the NOTICE severity for the cluster configuration and status change events.The NOTICE severity is introduced for the cluster event in the 4.2 release. It is the severity between the INFO and WARNING severity. Now all severities for the cluster events are (from low to high) • INFO (not exposed to the SNMP interface) • NOTICE (newly introduced in the 4.2 release) • WARNING • ERROR • CRITICAL • FATAL In the 4.2 release, the cluster event system is enhanced to make sure at least one event with the NOTICE or a higher severity will be generated when there is a configuration or status change from a cluster component instance. In other words, the cluster events from a cluster with the NOTICE or higher severities will cover all status and configuration changes in the cluster (include all component instances). The cluster component instance here refers to an instance of the following cluster componentsnode, quorum, resource group, resource, network interface, device group, disk, zone cluster and geo cluster heartbeat. For example, pnode1 is an instance of the cluster node component, and oracleRG is an instance of the cluster resource group. With the introduction of the NOTICE severity event, when the cluster event SNMP interface is enabled, the consumers of the SNMP interface will get notification for all status and configuration changes in the cluster. A thrid-party system management platform with the cluster SNMP interface integration can generate alarms and clear alarms programmatically, because it can get notifications for the status change from ONLINE to OFFLINE and also from OFFLINE to ONLINE. 2) Customization for the cluster event SNMP interface • The number of events logged to the MIB is 100. When the number of events stored in the MIB reaches 100 and a new qualified event arrives, the oldest event will be removed before storing the new event to the MIB (FIFO, first in, first out). The 100 is the default and minimum value for the number of events stored in the MIB. It can be changed by setting the log_number property value using the clsnmpmib command. The maximum number that can be set for the property is 500. • The cluster event SNMP interface takes effect on the NOTICE or high severity events. The NOTICE severity is also the default and lowest event severity for the SNMP interface. The SNMP interface can be configured to take effect on other higher severity events, such as WARNING or higher severity events by setting the min_severity property to the WARNING. When the min_severity property is set to the WARNING, the cluster event SNMP interface would behave the same as the previous releases (prior to the 4.2 release). Examples, • Set the number of events stored in the MIB to 200 # clsnmpmib set -p log_number=200 event • Set the interface to take effect on WARNING or higher severity events. # clsnmpmib set -p min_severity=WARNING event Administering the Cluster Event SNMP Interface Oracle Solaris Cluster provides the following three commands to administer the SNMP interface. • clsnmpmib: administer the SNMP interface, and the MIB configuration. • clsnmphost: administer hosts for the SNMP traps • clsnmpuser: administer SNMP users (specific for SNMP v3 protocol) Only clsnmpmib is changed in the 4.2 release to support the aforementioned customization of the SNMP interface. Here are some simple examples using the commands. Examples: 1. Enable the cluster event SNMP interface on the local node # clsnmpmib enable event 2. Display the status of the cluster event SNMP interface on the local node # clsnmpmib show -v 3. Configure my_host to receive the cluster event SNMP traps. # clsnmphost add my_host Cluster Event SNMP Interface uses the common agent container SNMP adaptor, which is based on the JDMK SNMP implementation as its SNMP agent infrastructure. By default, the port number for the SNMP MIB is 11161, and the port number for the SNMP traps is 11162. The port numbers can be changed by using the cacaoadm. For example, # cacaoadm list-params Print all changeable parameters. The output includes the snmp-adaptor-port and snmp-adaptor-trap-port properties. # cacaoadm set-param snmp-adaptor-port=1161 Set the SNMP MIB port number to 1161. # cacaoadm set-param snmp-adaptor-trap-port=1162 Set the SNMP trap port number to 1162. The cluster event SNMP MIB is defined in sun-cluster-event-mib.mib, which is located in the /usr/cluster/lib/mibdirectory. Its OID is 1.3.6.1.4.1.42.2.80, that can be used to walk through the MIB data. Again, for more detail information about the cluster event SNMP interface, please see the Oracle Solaris Cluster 4.2 System Administration Guide. - Leland Chen 

  Read the article

• Create a kind of Interface c++ [migrated]

  - by Liuka

  I'm writing a little 2d rendering framework with managers for input and resources like textures and meshes (for 2d geometry models, like quads) and they are all contained in a class "engine" that interacts with them and with a directX class. So each class have some public methods like init or update. They are called by the engine class to render the resources, create them, but a lot of them should not be called by the user: //in pseudo c++ //the textures manager class class TManager { private: vector textures; .... public: init(); update(); renderTexture(); //called by the "engine class" loadtexture(); gettexture(); //called by the user } class Engine { private: Tmanager texManager; public: Init() { //initialize all the managers } Render(){...} Update(){...} Tmanager* GetTManager(){return &texManager;} //to get a pointer to the manager //if i want to create or get textures } In this way the user, calling Engine::GetTmanager will have access to all the public methods of Tmanager, including init update and rendertexture, that must be called only by Engine inside its init, render and update functions. So, is it a good idea to implement a user interface in the following way? //in pseudo c++ //the textures manager class class TManager { private: vector textures; .... public: init(); update(); renderTexture(); //called by the "engine class" friend class Tmanager_UserInterface; operator Tmanager_UserInterface*(){return reinterpret_cast<Tmanager_UserInterface*>(this)} } class Tmanager_UserInterface : private Tmanager { //delete constructor //in this class there will be only methods like: loadtexture(); gettexture(); } class Engine { private: Tmanager texManager; public: Init() Render() Update() Tmanager_UserInterface* GetTManager(){return texManager;} } //in main function //i need to load a texture //i always have access to Engine class engine-GetTmanger()-LoadTexture(...) //i can just access load and get texture; In this way i can implement several interface for each object, keeping visible only the functions i (and the user) will need. There are better ways to do the same?? Or is it just useless(i dont hide the "framework private functions" and the user will learn to dont call them)? Before i have used this method: class manager { public: //engine functions userfunction(); } class engine { private: manager m; public: init(){//call manager init function} manageruserfunciton() { //call manager::userfunction() } } in this way i have no access to the manager class but it's a bad way because if i add a new feature to the manager i need to add a new method in the engine class and it takes a lot of time. sorry for the bad english.

  Read the article

• How is this "interface"-like structure/pattern called?

  - by Sebastian Negraszus

  Let's assume we have an XmlDoc class that contains basic functionality for dealing with an XML data structure and saving/loading data to/from a file. Now we have several subclasses, A, B and C. They all inherit from XmlDoc and add component-specific methods for setting and getting lots of data. They are like "interfaces" but also add an implementation for the signatures. Finally, we have an ABCDoc class that joins all the "interfaces" via virtual multiple inheritence and adds some ABCDoc-specific stuff, such as using XMLDoc-methods to set an appropriate doc type. We may also have an ADoc class for only saving A data. How is this pattern called? "Interface" is not really the right word since interfaces usually do not contain an implementation. Bonus points for C++ code conventions.

  Read the article

• Designing software interface for various screen sizes

  - by Tower

  Hi, Nowadays we have screens like 1920x1200 and 1680x1050 in popular use and some even use 2560x1600 resolution while some older systems still rely on a 800x600 resolution. I am writing a software that looks good on a 1680x1050, but too small on a 1920x1200 and too large on a 1024x768. Do you have suggestions how to go for designing an application for various screen sizes? Things were a lot simpler before when we had little differences in resolutions, but now it seems there's no good way of handling this. I know this question is more about designing / layout than programming, but I bet this is more or less part of programmers life so I made this post here.

  Read the article

• Looking for a simple web interface with subversion support and ticket /issue tracker [closed]

  - by Stefan Andre Brannfjell

  I am working on a small project and we have a few programmers on the job. We are using subversion to commit updates and keep all developers up to date on their workstations. However, we have yet to find a suitable web interface to use for it. I have tried redmine, but that installation progress was extremely bothersome and advanced. Once I got it to work I found out that it was slow and did not meet my expectations. As well as it seems a bit complex for our needs. I would prefer to find a solution that supports lighttpd web server, however that seem to be very hard to come by, those I have found seem to only have apache support. Functionality i wish for the website: - login to an svn account - view svn logs - view & create issues, todo list etc - view svn difference Do you have any open source recommendations that I can try out? I will appreciate any kind of reply. :) Edit: I wish to host the website on our own servers.

  Read the article

• Changing the interface language in Windows 7 Home Premium

  - by Cristián Romo

  A friend of mine has recently purchased a laptop in the U.S. that has Windows 7 Home Premium on it with an English interface. Not being a native English speaker, I'm trying to change the interface language to traditional Chinese. I've looked through the Control Panel in search of something that might let me change the interface language. Naturally, I looked at the Region and Language section and managed to change the formats the computer uses and install a working keyboard, but I haven't found a way to change the interface language. Upon doing some research, I found out that there are two kinds of interface packs, Multilingual User Interface (MUI) and Language Interface Packs (LIP). It seems that MUIs can only be installed through Windows Update, so I looked through the list of updates. To my dismay, the language packs are not present. The optional updates tab doesn't even show up. Many sites show a drop down menu the under Keyboards and Languages tab in the Region and Language options, yet it doesn't show up for me. We also don't have the Windows 7 DVD which might contain this useful file. As far as the LIPs go, I can't find one in Chinese at all, let alone traditional Chinese. Can the interface language be changed in Home Premium at all? If it can, how would I do so?

  Read the article

• enabling a user (created with adduser command) for lightdm graphical login

  - by Basile Starynkevitch

  I just installed Ubuntu 12.04 AMD64 on a new (empty) hard disk (because the previous crashed) Since I am quite familiar with Debian, I created two accounts with the adduser command. Since I am also having an NFSv3 file system, I explictly gave user ids when creating them (for simplicity, I keep the same user id on the home server, running Debian; the user names contain digits; I'm not using LDAP), e.g. # grep bethy /etc/passwd bethy46:x:501:501:Bethy XXX,,,06123456:/home/bethy:/bin/bash # grep bethy /etc/group bethy64:x:501: # grep bethy /etc/shadow bethy46:$6$vQ-wmuchmorethings-2o/:15479:0:99999:7:: Of course /home/bethy exists The actual user name is slightly different, and I am not showing the real entries (for obvious privacy reasons) However, these users don't appear at graphical login prompt (lightdm). And they exist in the system, they have entries in /etc/passwd & /etc/shadow and I (partly) restored their /home I've got no specific user config under /etc/lightdm ; file /etc/lightdm/users.conf mentions # NOTE: If you have AccountsService installed on your system, then LightDM # will use this instead and these settings will be ignored but I have no idea of how to deal with AccountsService thru the command line As you probably guessed, I really dislike doing administrative tasks thru a graphical interface; I much prefer the command line What did I do wrong? How can a user entry not appear in lightdm graphical login? (I need to have my wife's user entry apparent for graphical login). I am not asking how to hide a user, but how to show it in lightdm graphical prompt work-around As I have been told in comments by Nirmik and by Enzotib, lightdm probably don't show any users of uid less than 1024. So I changed all the uid to be more than 8200 (including on the Debian NFS server) and this made all the users visible at the graphical prompt. It is a pain that such a threshold is not really documented.

  Read the article

• Interface is too empty

  - by Nade Ali

  I have recently installed Ubuntu 12.04 0n my PC without any third-party software (cause i havent been able to get my dial-up to work). When i open Ubuntu after reboot, there is absolutely nothing on the desktop screen except for an 'Untitled' folder at the corner of the screen. There is no menu, no taskbars at the top whatever. I dont know why this is happening. The .iso from which i have booted amd installed Ubuntu is fine. I have already conducted an md5sum test and it was all fine. Looking forward to your response.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >