Search Results

Search found 30 results on 2 pages for 'mcu'.

Page 1/2 | 1 2  | Next Page >

• Object Oriented programming on 8-bit MCU Case Study

  - by Calvin Grier

  I see that there's a lot of questions related to OO Programming here. I'm actually trying to find a specific resource related to embedded OO approaches for an 8 bit MCU. Several years back (maybe 6) I was looking for material related to Object Oriented programming for resource constrained 8051 microprocessors. I found an article/website with a case history of a design group that used a very small RAM part, and implemented many Object based constructs during their C design and development. I believe it was an 8051. The project was a success, and managed to stay inside the very small ROM/RAM they had available. I'm attempting to find it again, but Google can't locate it. The article was well written, and recommended a "mixed" approach using C methods for inheritance and encapsulation - if I recall correctly. Can anyone help me locate this article?

  Read the article

• 8051 MCU debug board function

  - by b-gen-jack-o-neill

  Hi, in school I have written many programs for 8051 compatible CPU. But I never actually knew how our "debug" sets worked. I mean, we test our programs in special sets, which actually allow you to very simply load program to CPU via PC serial port. But I thing you know this musch more better than I. But how it works? I mean, I know there is chip which adjusts signal level from PC serial port to TTL logic, and than connected to serial line of 8051. But thats all I know. Actually even my teacher doesen´t know how it works, since school bought it all. So, I suspect there is some program already running in the 8051 which handles communication and stores your program into memory, am I right? But, how can you make 8051 to process instructions from different location than ROM? Becouse if I am right, you cannot write into ROM memory by any instruction, as well as 8051 can only read instructions from ROM?

  Read the article

• Count seconds and minutes with MCU timer/interrupt?

  - by arynhard

  I am trying to figure out how to create a timer for my C8051F020 MCU. The following code uses the value passed to init_Timer2() with the following formula: 65535-(0.1 / (12/2000000)=48868. I set up the timer to count every time it executes and for every 10 counts, count one second. This is based on the above formula. 48868 when passed to init_Timer2 will produce a 0.1 second delay. It would take ten of them per second. However, when I test the timer it is a little fast. At ten seconds the timer reports 11 seconds, at 20 seconds the timer reports 22 seconds. I would like to get as close to a perfect second as I can. Here is my code: #include <compiler_defs.h> #include <C8051F020_defs.h> void init_Clock(void); void init_Watchdog(void); void init_Ports(void); void init_Timer2(unsigned int counts); void start_Timer2(void); void timer2_ISR(void); unsigned int timer2_Count; unsigned int seconds; unsigned int minutes; int main(void) { init_Clock(); init_Watchdog(); init_Ports(); start_Timer2(); P5 &= 0xFF; while (1); } //============================================================= //Functions //============================================================= void init_Clock(void) { OSCICN = 0x04; //2Mhz //OSCICN = 0x07; //16Mhz } void init_Watchdog(void) { //Disable watchdog timer WDTCN = 0xDE; WDTCN = 0xAD; } void init_Ports(void) { XBR0 = 0x00; XBR1 = 0x00; XBR2 = 0x40; P0 = 0x00; P0MDOUT = 0x00; P5 = 0x00; //Set P5 to 1111 P74OUT = 0x08; //Set P5 4 - 7 (LEDs) to push pull (Output) } void init_Timer2(unsigned int counts) { CKCON = 0x00; //Set all timers to system clock divided by 12 T2CON = 0x00; //Set timer 2 to timer mode RCAP2 = counts; T2 = 0xFFFF; //655535 IE |= 0x20; //Enable timer 2 T2CON |= 0x04; //Start timer 2 } void start_Timer2(void) { EA = 0; init_Timer2(48868); EA = 1; } void timer2_ISR(void) interrupt 5 { T2CON &= ~(0x80); P5 ^= 0xF0; timer2_Count++; if(timer2_Count % 10 == 0) { seconds++; } if(seconds % 60 == 0 && seconds != 0) { minutes++; } }

  Read the article

• How to receive packets on the MCU's serial port?

  - by itisravi

  Hello, Consider this code running on my microcontroller unit(MCU): while(1){ do_stuff; if(packet_from_PC) send_data_via_gpio(new_packet); //send via general purpose i/o pins else send_data_via_gpio(default_packet); do_other_stuff; } The MCU is also interfaced to a PC via a UART.Whenever the PC sends data to the MCU, the *new_packet* is sent, otherwise the *default_packet* is sent.Each packet can be 5 or more bytes with a pre defined packet structure. My question is: 1.Should i receive the entire packet from PC using inside the UART interrut service routine (ISR)? In this case, i have to implement a state machine inside the ISR to assemble the packet (which can be lengthy with if-else or switch-case blocks). 2.Detect a REQUEST command (one byte)from the PC in my ISR set a flag, diable UART interrupt alone and form the packet in my while(1) loop by polling the UART?

  Read the article

• The question about the 89c52 Serial ports receive Variable-length strings

  - by shuil

  The strings` length is less than 30 but Variable. I use the following code, but the SComAssistant only can receive two Character. ================================================================= code url http://fayaa.com/code/view/11190/

  Read the article

• Commercial product using a GPL OS

  - by pfried

  we are planning to create a commercial product. The product consists of come MCUs and a small computer (we are developping on a raspberry pi at the moment). The computer needs an operating system as we would like keep things like WLAN and booting as simple as possible. We create some software running on this computer (node.js application). The most operating systems like Arch Linux are licenced under the GPL. The product we would sell contains the computer with preinstalled OS and software. This system operates as a central access point to MCU devices and is able to control them. We use other's software in our product. We do not modify their source code. The product (the computer part) consists of a computer, an OS and software we create. How does the use of an OS affect our own code (licence)? Is there a possibility of avoiding GPL for our own code? eg. shipping the software seperated? Are there any effects to other components of our product, eg. the MCU part? The node.js application delivers a WebApp to the client where it is executed. Are there any effects (As we would like to sell parts of the code as an additional App on the App Stores)? I know we make use of the work of the community and i respect this. The problem is: The software alone is kind of useless without the MCU devices. I do not expect a legal advice.

  Read the article

• How do I achieve lossless JPEG joining without truncation of partial MCUs?

  - by Karan

  I am working on a project for which I need to join thousands of JPEG images losslessly (I'm not talking about the Lossless JPEG/JPEG 2000/JPEG-LS formats here). Aforementioned images have varying levels of chroma subsampling (1x1, 1x2, 2x1, 2x2), resulting in varying MCU sizes (8x8, 8x16, 16x8, 16x16 px). However, in any given set of images to be joined together, each image has identical characteristics. For now, let's assume I only have 2 images. Image #1 (I1) is 256x256px in size and #2 (I2) is 239x256px in size. 2x2 subsampling is used such that MCU size is 16x16px. I2 thus obviously has partial MCUs at the right edge, since its width is not evenly divisible by 16. (I've read that so-called 'partial' MCUs actually contain the data for a complete MCU, but the image dimensions instruct the renderer to only display the relevant pixels and ignore/hide the extra ones.) Looking around for tools that could help me accomplish this, I came across a modified version of JpegTran, that contains an experimental lossless crop 'n' drop (cut & paste) feature. All the other apps I encountered that support lossless JPEG editing seem to utilise IJG's (JpegTran) code, so this seemed to be the logical choice. Also, given the sheer number of images, I wanted something that could preferably be run from the command-line so that I could automate the process with a script. Unfortunately, while everything else worked fine, it seems JpegTran truncates the partial MCUs instead of retaining them. Thus in the example above, the final joined image contains all of I1, but only 224x256px of I2. Why 224? because 239 = 14x16+15, which means there are 14 full MCUs along the width, and 1 partial MCU (just 1px short of the complete 16px). The last 15px is what is getting blanked, leading to a 495x256px image with 15px of blank (grey) pixels at the right edge. See images below (shame that imgur re-compresses them): (left )+ (right) = As you can clearly see, the red portion (15px) of I2 has been truncated by JpegTran. If the MCUs were 8px in width, the lost portion would have been the right-most 7px of I2. Similarly, joining I3 (256x239px) *below * I1 would cause the loss of 7 or 15px, depending on the MCU height of course: (top) + (bottom) = If this is better suited to some other StackExchange (or even non-SE) site/forum where JPEG/image encoding experts hang out, do let me know. Can what I am attempting even be done, or is the so-called 'lossless' JPEG crop 'n' drop only valid for images with no partial MCUs? (Maybe that is why the feature is still in an "experimental state" more than a decade after being introduced...) Until I know for sure that it is impossible, I am not interested in suggestions for lossy joining. Avoiding any generational loss whatsoever is the sole reason why I'm breaking my head over this, else I'd have had this done and dusted ages ago. Also, I am not interested in suggestions related to switching image formats. I do not control the source of the images. If it can be done, how? Please keep in mind that any alternate apps suggested must ideally be capable of automation, given the requirements stated above. (But given how it's unlikely I'm even going to receive a useful answer given the constraints, I would be happy with any app suggestion just as long as it actually works. I can always look into an AutoIT/AHK script or something later to automate it.) I understand that an odd-sized final image might cause issues, so I am fully prepared to accept any solution, even if it results in blank (preferably black) padding pixels to the right/bottom. What I mean is, I don't care if I1 + I2 is 496x256px (1px padding) or even 512x256px (17px padding) in size, as long as the final image contains all the actual image data from both source images, and the entire process is lossless. Obviously the lesser the padding (if any), the better, but at this point any solution will do. A Windows-based solution would be perfect, but a Linux-based one would be entirely acceptable.

  Read the article

• makefile pathing issues on OSX

  - by Justin808

  OK, I thought I would try one last update and see if it gets me anywhere. I've created a very small test case. This should not build anything, it just tests the path settings. Also I've setup the path so there are no spaces. The is the smallest, simplest test case I could come up with. This makefile will set the path, echo the path, run avr-gcc -v with the full path specified and then try to run it without the full path specified. It should find avr-gcc in the path on the second try, but does not. makefile TOOLCHAIN := /Users/justinzaun/Desktop/AVRBuilder.app/Contents/Resources/avrchain PATH := ${TOOLCHAIN}/bin:${PATH} export PATH all: @echo ${PATH} @echo -------- "${TOOLCHAIN}/bin/avr-gcc" -v @echo -------- avr-gcc -v output JUSTINs-MacBook-Air:Untitled justinzaun$ make /Users/justinzaun/Desktop/AVRBuilder.app/Contents/Resources/avrchain/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin -------- "/Users/justinzaun/Desktop/AVRBuilder.app/Contents/Resources/avrchain/bin/avr-gcc" -v Using built-in specs. COLLECT_GCC=/Users/justinzaun/Desktop/AVRBuilder.app/Contents/Resources/avrchain/bin/avr-gcc COLLECT_LTO_WRAPPER=/Users/justinzaun/Desktop/AVRBuilder.app/Contents/Resources/avrchain/bin/../libexec/gcc/avr/4.6.3/lto-wrapper Target: avr Configured with: /Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../gcc/configure --prefix=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --exec-prefix=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --datadir=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --target=avr --enable-languages=c,objc,c++ --disable-libssp --disable-lto --disable-nls --disable-libgomp --disable-gdbtk --disable-threads --enable-poison-system-directories Thread model: single gcc version 4.6.3 (GCC) -------- avr-gcc -v make: avr-gcc: No such file or directory make: *** [all] Error 1 JUSTINs-MacBook-Air:Untitled justinzaun$ Original Question I'm trying to set the path from within the makefile. I can't seem to do this on OSX. Setting the path with PATH := /new/bin/:$(PATH) does not work. See my makefile below. makefile PROJECTNAME = Untitled # Name of target controller # (e.g. 'at90s8515', see the available avr-gcc mmcu # options for possible values) MCU = atmega640 # id to use with programmer # default: PROGRAMMER_MCU=$(MCU) # In case the programer used, e.g avrdude, doesn't # accept the same MCU name as avr-gcc (for example # for ATmega8s, avr-gcc expects 'atmega8' and # avrdude requires 'm8') PROGRAMMER_MCU = $(MCU) # Source files # List C/C++/Assembly source files: # (list all files to compile, e.g. 'a.c b.cpp as.S'): # Use .cc, .cpp or .C suffix for C++ files, use .S # (NOT .s !!!) for assembly source code files. PRJSRC = main.c \ utils.c # additional includes (e.g. -I/path/to/mydir) INC = # libraries to link in (e.g. -lmylib) LIBS = # Optimization level, # use s (size opt), 1, 2, 3 or 0 (off) OPTLEVEL = s ### You should not have to touch anything below this line ### PATH := /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin:/usr/bin:/bin:$(PATH) CPATH := /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/include # HEXFORMAT -- format for .hex file output HEXFORMAT = ihex # compiler CFLAGS = -I. $(INC) -g -mmcu=$(MCU) -O$(OPTLEVEL) \ -fpack-struct -fshort-enums \ -funsigned-bitfields -funsigned-char \ -Wall -Wstrict-prototypes \ -Wa,-ahlms=$(firstword \ $(filter %.lst, $(<:.c=.lst))) # c++ specific flags CPPFLAGS = -fno-exceptions \ -Wa,-ahlms=$(firstword \ $(filter %.lst, $(<:.cpp=.lst)) \ $(filter %.lst, $(<:.cc=.lst)) \ $(filter %.lst, $(<:.C=.lst))) # assembler ASMFLAGS = -I. $(INC) -mmcu=$(MCU) \ -x assembler-with-cpp \ -Wa,-gstabs,-ahlms=$(firstword \ $(<:.S=.lst) $(<.s=.lst)) # linker LDFLAGS = -Wl,-Map,$(TRG).map -mmcu=$(MCU) \ -lm $(LIBS) ##### executables #### CC=avr-gcc OBJCOPY=avr-objcopy OBJDUMP=avr-objdump SIZE=avr-size AVRDUDE=avrdude REMOVE=rm -f ##### automatic target names #### TRG=$(PROJECTNAME).out DUMPTRG=$(PROJECTNAME).s HEXROMTRG=$(PROJECTNAME).hex HEXTRG=$(HEXROMTRG) $(PROJECTNAME).ee.hex # Start by splitting source files by type # C++ CPPFILES=$(filter %.cpp, $(PRJSRC)) CCFILES=$(filter %.cc, $(PRJSRC)) BIGCFILES=$(filter %.C, $(PRJSRC)) # C CFILES=$(filter %.c, $(PRJSRC)) # Assembly ASMFILES=$(filter %.S, $(PRJSRC)) # List all object files we need to create OBJDEPS=$(CFILES:.c=.o) \ $(CPPFILES:.cpp=.o) \ $(BIGCFILES:.C=.o) \ $(CCFILES:.cc=.o) \ $(ASMFILES:.S=.o) # Define all lst files. LST=$(filter %.lst, $(OBJDEPS:.o=.lst)) # All the possible generated assembly # files (.s files) GENASMFILES=$(filter %.s, $(OBJDEPS:.o=.s)) .SUFFIXES : .c .cc .cpp .C .o .out .s .S \ .hex .ee.hex .h .hh .hpp # Make targets: # all, disasm, stats, hex, writeflash/install, clean all: $(TRG) $(TRG): $(OBJDEPS) $(CC) $(LDFLAGS) -o $(TRG) $(OBJDEPS) #### Generating assembly #### # asm from C %.s: %.c $(CC) -S $(CFLAGS) $< -o $@ # asm from (hand coded) asm %.s: %.S $(CC) -S $(ASMFLAGS) $< > $@ # asm from C++ .cpp.s .cc.s .C.s : $(CC) -S $(CFLAGS) $(CPPFLAGS) $< -o $@ #### Generating object files #### # object from C .c.o: $(CC) $(CFLAGS) -c $< -o $@ # object from C++ (.cc, .cpp, .C files) .cc.o .cpp.o .C.o : $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@ # object from asm .S.o : $(CC) $(ASMFLAGS) -c $< -o $@ #### Generating hex files #### # hex files from elf .out.hex: $(OBJCOPY) -j .text \ -j .data \ -O $(HEXFORMAT) $< $@ .out.ee.hex: $(OBJCOPY) -j .eeprom \ --change-section-lma .eeprom=0 \ -O $(HEXFORMAT) $< $@ #### Information #### info: @echo PATH: @echo "$(PATH)" $(CC) -v which $(CC) #### Cleanup #### clean: $(REMOVE) $(TRG) $(TRG).map $(DUMPTRG) $(REMOVE) $(OBJDEPS) $(REMOVE) $(LST) $(REMOVE) $(GENASMFILES) $(REMOVE) $(HEXTRG) error JUSTINs-MacBook-Air:Untitled justinzaun$ make avr-gcc -I. -g -mmcu=atmega640 -Os -fpack-struct -fshort-enums -funsigned-bitfields -funsigned-char -Wall -Wstrict-prototypes -Wa,-ahlms=main.lst -c main.c -o main.o make: avr-gcc: No such file or directory make: *** [main.o] Error 1 JUSTINs-MacBook-Air:Untitled justinzaun$ If I change my CC= to include the full path: CC=/Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin/avr-gcc then it finds it, but this doesn't seem the correct way to do things. For instance its trying to use the system as not the one in the correct path. update - Just to be sure, I'm adding the output of my ls command too so everyone knows the file exist. Also I've added a make info target to the makefile and showing that output as well. JUSTINs-MacBook-Air:Untitled justinzaun$ ls /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin ar avr-elfedit avr-man avr-strip objcopy as avr-g++ avr-nm avrdude objdump avr-addr2line avr-gcc avr-objcopy c++ ranlib avr-ar avr-gcc-4.6.3 avr-objdump g++ strip avr-as avr-gcov avr-ranlib gcc avr-c++ avr-gprof avr-readelf ld avr-c++filt avr-ld avr-size ld.bfd avr-cpp avr-ld.bfd avr-strings nm JUSTINs-MacBook-Air:Untitled justinzaun$ Output of make info with the \ in my path JUSTINs-MacBook-Air:Untitled justinzaun$ make info PATH: /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin avr-gcc -v make: avr-gcc: No such file or directory make: *** [info] Error 1 JUSTINs-MacBook-Air:Untitled justinzaun$ Output of make info with the \ not in my path JUSTINs-MacBook-Air:Untitled justinzaun$ make info PATH: /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR Builder.app/Contents/Resources/avrchain/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin avr-gcc -v make: avr-gcc: No such file or directory make: *** [info] Error 1 JUSTINs-MacBook-Air:Untitled justinzaun$ update - When I have my CC set to include the full path as described above, this is the result of make info. JUSTINs-MacBook-Air:Untitled justinzaun$ make info PATH: /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR Builder.app/Contents/Resources/avrchain/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin/avr-gcc -v Using built-in specs. COLLECT_GCC=/Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR Builder.app/Contents/Resources/avrchain/bin/avr-gcc COLLECT_LTO_WRAPPER=/Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR Builder.app/Contents/Resources/avrchain/bin/../libexec/gcc/avr/4.6.3/lto-wrapper Target: avr Configured with: /Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../gcc/configure --prefix=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --exec-prefix=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --datadir=/Users/justinzaun/Development/AVRBuilder/Packages/gccobj/../build/ --target=avr --enable-languages=c,objc,c++ --disable-libssp --disable-lto --disable-nls --disable-libgomp --disable-gdbtk --disable-threads --enable-poison-system-directories Thread model: single gcc version 4.6.3 (GCC) which /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR\ Builder.app/Contents/Resources/avrchain/bin/avr-gcc /Users/justinzaun/Library/Developer/Xcode/DerivedData/AVR_Builder-gxiykwiwjywvoagykxvmotvncbyd/Build/Products/Debug/AVR Builder.app/Contents/Resources/avrchain/bin/avr-gcc JUSTINs-MacBook-Air:Untitled justinzaun$

  Read the article

• Ti Launchpad

  - by raysmithequip

  Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

  Read the article

• FreeRTOS Sleep Mode hazards while using MSP430f5438

  - by michael

  Hi, I wrote an an idle hook shown here void vApplicationIdleHook( void ) { asm("nop"); P1OUT &= ~0x01;//go to sleep lights off! LPM3;// LPM Mode - remove to make debug a little easier... asm("nop"); } That should cause the LED to turn off, and MSP430 to go to sleep when there is nothing to do. I turn the LED on during some tasks. I also made sure to modify the sleep mode bit in the SR upon exit of any interrupt that could possibly wake the MCU (with the exception of the scheduler tick isr in portext.s43. The macro in iar is __bic_SR_register_on_exit(LPM3_bits); // Exit Interrupt as active CPU However, it seems as though putting the MCU to sleep causes some irregular behavior. The led stays on always, although when i scope it, it will turn off for a couple instructions cycles when ever i wake the mcu via one of the interrupts (UART), and then turn back on. If I comment out the LPM3 instruction, things go as planned. The led stays off for most of the time and only comes on when a task is running. I am using a MSP4f305438 Any ideas?

  Read the article

• OCS 2007: Issues with /LiveServer/MCUFactory

  - by routeNpingme

  I'm not really an Office Communications Server expert, but just trying to resolve some seemingly minor issues with a new install... The following error is occurring in the OCS event log, and when I try to visit https://servername:444/LiveServer/MCUFactory in Internet Explorer to test the address, I just get a "page cannot be displayed" error. I can telnet to port 444 on the server and verify that the port is open and listening. Any ideas? Event Type: Error Event Source: OCS MCU Infrastructure Event Category: (1022) Event ID: 61013 Date: 7/28/2009 Time: 8:47:42 AM User: N/A Computer: COMM2 Description: The process DataMCUSvc(1284) failed to send health notifications to the MCU factory at https://servername:444/LiveServer/MCUFactory/. Failure occurrences: 29, since 7/28/2009 8:40:27 AM. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• OCS 2007: Issues with /LiveServer/MCUFactory

  - by routeNpingme

  I'm not really an Office Communications Server expert, but just trying to resolve some seemingly minor issues with a new install... The following error is occurring in the OCS event log, and when I try to visit https://servername:444/LiveServer/MCUFactory in Internet Explorer to test the address, I just get a "page cannot be displayed" error. I can telnet to port 444 on the server and verify that the port is open and listening. Any ideas? Event Type: Error Event Source: OCS MCU Infrastructure Event Category: (1022) Event ID: 61013 Date: 7/28/2009 Time: 8:47:42 AM User: N/A Computer: COMM2 Description: The process DataMCUSvc(1284) failed to send health notifications to the MCU factory at https://servername:444/LiveServer/MCUFactory/. Failure occurrences: 29, since 7/28/2009 8:40:27 AM. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• CodePlex Daily Summary for Saturday, March 24, 2012

  CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

  Read the article

• Which opcodes are faster at the CPU level?

  - by Geotarget

  In every programming language there are sets of opcodes that are recommended over others. I've tried to list them here, in order of speed. Bitwise Integer Addition / Subtraction Integer Multiplication / Division Comparison Control flow Float Addition / Subtraction Float Multiplication / Division Where you need high-performance code, C++ can be hand optimized in assembly, to use SIMD instructions or more efficient control flow, data types, etc. So I'm trying to understand if the data type (int32 / float32 / float64) or the operation used (*, +, &) affects performance at the CPU level. Is a single multiply slower on the CPU than an addition? In MCU theory you learn that speed of opcodes is determined by the number of CPU cycles it takes to execute. So does it mean that multiply takes 4 cycles and add takes 2? Exactly what are the speed characteristics of the basic math and control flow opcodes? If two opcodes take the same number of cycles to execute, then both can be used interchangeably without any performance gain / loss? Any other technical details you can share regarding x86 CPU performance is appreciated

  Read the article

• CodePlex Daily Summary for Saturday, November 12, 2011

  CodePlex Daily Summary for Saturday, November 12, 2011Popular ReleasesDynamic PagedCollection (Silverlight / WPF Pagination): PagedCollection: All classes which facilitate your dynamic pagination in Silverlight or WPF !Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...DotSpatial: DotSpatial Release Candidate 1 (1.0.823): Supports loading extensions using System.ComponentModel.Composition. DemoMap compiled as x86 so that GDAL runs on x64 machines. How to: Use an Assembly from the WebBe aware that your browser may add an identifier to downloaded files which results in "blocked" dll files. You can follow the following link to learn how to "Unblock" files. Right click on the zip file before unzipping, choose properties, go to the general tab and click the unblock button. http://msdn.microsoft.com/en-us/library...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Quick Performance Monitor: Version 1.8.0: Now you can add multiple counters/instances at once! Yes, I know its overdue...CODE Framework: 4.0.11110.0: Various minor fixes and tweaks.Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...Player Framework by Microsoft: HTML5 Player Framework 1.0: Additional DownloadsHTML5 Player Framework Examples - This is a set of examples showing how to setup and initialize the HTML5 Player Framework. This includes examples of how to use the Player Framework with both the HTML5 video tag and Silverlight player. Note: Be sure to unblock the zip file before using. Note: In order to test Silverlight fallback in the included sample app, you need to run the html and xap files over http (e.g. over localhost). Silverlight Players - Visit the Silverlig...MapWindow 4: MapWindow GIS v4.8.6 - Final release - 64Bit: What’s New in 4.8.6 (Final release)A few minor issues have been fixed What’s New in 4.8.5 (Beta release)Assign projection tool. (Sergei Leschinsky) Projection dialects. (Sergei Leschinsky) Projections database converted to SQLite format. (Sergei Leschinsky) Basic code for database support - will be developed further (ShapefileDataClient class, IDataProvider interface). (Sergei Leschinsky) 'Export shapefile to database' tool. (Sergei Leschinsky) Made the GEOS library static. geos.dl...NewLife XCode ??????: XCode v8.2.2011.1107、XCoder v4.5.2011.1108: v8.2.2011.1107 ?IEntityOperate.Create?Entity.CreateInstance??????forEdit，????????(FindByKeyForEdit)???，???false ??????Entity.CreateInstance，????forEdit，???????????????????? v8.2.2011.1103 ??MS????，??MaxMin??（????????）、NotIn??（????）、?Top??（??NotIn）、RowNumber??（?????） v8.2.2011.1101 SqlServer?????????DataPath，?????????????????????? Oracle?????????DllPath，????OCI??，???????????ORACLE_HOME?? Oracle?????XCode.Oracle.IsUseOwner，???????????Ow...Facebook C# SDK: v5.3.2: This is a RTW release which adds new features and bug fixes to v5.2.1. Query/QueryAsync methods uses graph api instead of legacy rest api. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ (experimental) added support for early preview for .NET 4.5 (binaries not distributed in codeplex nor nuget.org, will need to manually build from Facebook-Net45.sln) added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added ne...Delete Inactive TS Ports: List and delete the Inactive TS Ports: UPDATEAdded support for windows 2003 servers and removed some null reference errors when the registry key was not present List and delete the Inactive TS Ports - The InactiveTSPortList.EXE accepts command line arguments The InactiveTSPortList.Standalone.WithoutPrompt.exe runs as a standalone exe without the need for any command line arguments.Ribbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2207.267): BUG FIXES: - Cannot add multiple JavaScript and Url under Actions - Cannot add <Or> node under <OrGroup> - Adding a rule under <Or> node put the new rule node at the wrong placeWF Designer Express: WF Designer Express v0.6: ?????（???????????） Multi Language（Now, Japanese and English）ClosedXML - The easy way to OpenXML: ClosedXML 0.60.0: Added almost full support for auto filters (missing custom date filters). See examples Filter Values, Custom Filters Fixed issues 7016, 7391, 7388, 7389, 7198, 7196, 7194, 7186, 7067, 7115, 7144Microsoft Research Boogie: Nightly builds: This download category contains automatically released nightly builds, reflecting the current state of Boogie's development. We try to make sure each nightly build passes the test suite. If you suspect that was not the case, please try the previous nightly build to see if that really is the problem. Also, please see the installation instructions.GoogleMap Control: GoogleMap Control 6.0: Major design changes to the control in order to achieve better scalability and extensibility for the new features comming with GoogleMaps API. GoogleMap control switched to GoogleMaps API v3 and .NET 4.0. GoogleMap control is 100% ScriptControl now, it requires ScriptManager to be registered on the pages where and before it is used. Markers, polylines, polygons and directions were implemented as ExtenderControl, instead of being inner properties of GoogleMap control. Better perfomance. Better...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: V2.1: Version 2.1 (click on the right) this uses V4.0 of .net Version 2.1 adds the following features: (apologize if I forget some, added a lot of little things) Manual Lookup with TV or Movie (finally huh!), you can look up a movie or TV episode directly, you can right click on anythign, and choose manual lookup, then will allow you to type anything you want to look up and it will assign it to the file you right clicked. No Rename: a very popular request, this is an option you can set so that t...SubExtractor: Release 1020: Feature: added "baseline double quotes" character to selector box Feature: added option to save SRT files as ANSI (instead of previous UTF-8 only) Feature: made "Save Sup files to Source directory" apply to both Sup and Idx source files. Fix: removed SDH text (...) or [...] that is split over 2 lines Fix: better decision-making in when to prefix a line with a '-' because SDH was removedNew Projects- Gemini - code branch: the branch for all Hzj_jie's code(MPLF) MediaPortal LoveFilm Plugin: MediaPortal LoveFilm (Love Film) Plugin. Browse films, add/remove from lists, streams etc._: _Batalha Naval em C#: Jogo de batalha naval para a disciplina de C#BusyHoliday - Making Outlook's Calendar Busy for Holidays: When users add holidays to their Outlook calendar these are added as an all day event. However, these are added as free time. With users in other countries, if they were to invite a user in a country with a public holiday, they won't be able to see that the user is on a public holiday or busy. BusyHoliday will update existing holidays as busy time. This may improve users ability to collaborate efficiently across geographical boundries. C# and MCU: C# and MCU and webCampo Minado C Sharp: C sharp source code of the game minefield.CP2011test: CP2011 TestDynamic PagedCollection (Silverlight / WPF Pagination): PagedCollection helps a developer to easily control the pagination of their collection. This collection doesnt need all datas in memory, it can be attached to RIA/SQL/XML data ... and load needed data one after the other. The PagedCollection can be used with Silverlight or WPF.Fast MVVM: The faster way to build your MVVM (Model, View, ViewModel) applications. It's a basic and educational way to learn and work with MVVM. We have more than just a pack of classes or templates. We have a new concept that turn it a little easier.Habitat: Core game services, frameworks and templates for desktop, mobile and web game developers.Historical Data Repository: Repository stores serializable timestamped data items in compressed files structured in a way that allows to quickly find data by time, quickly read and write data items in chronological order. Key features: - all data is stored under a single root folder; like file system, repository can contain a tree of folders each of which contains its own data stream; when reading, multiple streams can be combined into a single output stream maintaining chronological order; the tree structure can b...Immunity Buster: This game is for HIV. We will be making a virus which will help to spread the knowledge about the virus and have Fun among the peers.JoeCo Blog Application: JoeCo Blog Application for ECE 574jweis sso user center: jweis is a user center,distination is to use in a contry ,ssoKinect Shape Game Connect with Windows Phone: The classic Shape Game for Microsoft Kinect extended to allow players to join in the game and deploy shapes from their windows phone. Uses TCP sockets. For educational purposes. Free to download and distribute.Liekhus Behavior Driven DevExpress XAF: Using the BDD (Behavior Driven Development) techniques of SpecFlow and the EasyTest scriptability of DevExpress XAF (eXpress Application Framework), you can leverage test first style of application development in a speed never though imaginable.Linq to BBYOpen: C# Linq Provider to access the REST based BBYOpen services from BestBuy.Mi clima: This is the source code for the application "Mi clima" published in the Windows Phone Marketplace. MySqlQueryToolkit: This project bundles all of the common performance tests into a single handy user interface. Simply drop your query in and use the tools to make your query faster. Includes index suggestion, column data type and length suggestion and common profiling options.OData Validation Framework: Project to show how to validate data using client and server side OData/WCF Data ServicesOMR Table Data Syncronizer - Only Data: This tools compare and syncronize table data. No schema syncronizing included on this project. Data comparition is fastest! 1,000,000 data compare time is: ~200 ms.OrchardPo: This is the po file management module that is used on http://orchardproject.netResistance Calculator: A calculator for parallel and/or series resistanceSMS Team 5: h? th?ng g?i SMS t? d?ngSportsStore: Prueba en tfs de sports storeUDP Transport: This is an attempt at implementation of WCF UDP transport compliant with soa.udp OASIS Standard WebUtils: Biblioteca com funções genéricas úteis para uso com ASP NET MVC??a??e?a - Greek Government Open Data Program - Windows Mobile Client: ? efa?µ??? Open Government sa? d??e? ?µes? p??sßas? ap? t? ????t? sa? se ????? t??? ??µ???, ??e? t?? ap?f?se?? ?a? ??e? t?? dap??e? t?? ????????? ???t??? ?a? ???? t?? ?p??es??? t?? ????????? ??µ?s??? µ?s? t?? ??ße???t???? p?????µµat?? ??a??e?a.

  Read the article

• How to set the mechanize page encoding?

  - by Juan Medín

  Hi, I'm trying to get a page with an ISO-8859-1 encoding clicking on a link, so the code is similar to this: page_result = page.link_with( :text => 'link_text' ).click So far I get the result with a wrong encoding, so I see characters like: 'T?tulo:' instead of 'Título:' I've tried several approaches, including: Stating the encoding in the first request using the agent like: @page_search = @agent.get( :url => 'http://www.server.com', :headers => { 'Accept-Charset' => 'ISO-8859-1' } ) Stating the encoding for the page itself page_result.encoding = 'ISO-8859-1' But I must be doing something wrong: a simple puts always show the wrong characters. Do you know how to state the encoding? Thanks in advance, Added: Executable example: require 'rubygems' require 'mechanize' WWW::Mechanize::Util::CODE_DIC[:SJIS] = "ISO-8859-1" @agent = WWW::Mechanize.new @page = @agent.get( :url => 'http://www.mcu.es/webISBN/tituloSimpleFilter.do?cache=init&layout=busquedaisbn&language=es', :headers => { 'Accept-Charset' => 'utf-8' } ) puts @page.body

  Read the article

• Image scaling in C

  - by Ganesh

  Hi, I am designing a jpeg to bmp decoder which scales the image. I have been supplied with the source code for the decoder so my actual work is to design a scaler . I do not know where to begin. I have scouted the internet for the various scaling algorithms but am not sure where to introduce the scaling. So should I do the the scaling after the image is converted into bmp or should I do this during the decoding at the MCU level. am confused :( If you guys have some information to help me out, its appreciated. any material to read, source code to analyse etc....

  Read the article

• UART speed possibly wrong

  - by Mike

  My brain is fried, so I thought I would pass this one to the community. When sending 1 character to my embedded system, it consistently thinks it receives 2 characters. The first received character seems to map to the transmitted character (in some unkown way) and the second received character is always 0xff Here is what I observed: Tx char (in hex) Rx character (in hex), I left out the second byte (always ff) 31 9D 32 9B 33 99 61 3D 62 3B 63 39 64 37 65 35 41 7D 42 7B 43 79 I have check my clocks and them seem to be ok. The only diff between this non working version and the previous version is that i am now using a RS485 chip. I have traced the signal all the way up to the MCU and it looks fine (confirmed the bit value on the rx pin)

  Read the article

• How do I split up a long value (32 bits) into four char variables (8bits) using C?

  - by Jordan S

  I have a 32 bit long variable, CurrentPosition, that I want to split up into 4, 8bit characters. How would I do that most efficiently in C? I am working with an 8bit MCU, 8051 architectecture. unsigned long CurrentPosition = 7654321; unsigned char CP1 = 0; unsigned char CP2 = 0; unsigned char CP3 = 0; unsigned char CP4 = 0; // What do I do next? Should I just reference the starting address of CurrentPosition with a pointer and then add 8 two that address four times? It is little Endian. ALSO I want CurrentPosition to remain unchanged.

  Read the article

• Web application / Domain model integration using JSON capable DTOs [on hold]

  - by g-makulik

  I'm a bit confused about architectural choices for the web-applications/java/python world. For c/c++ world the available (open source) choices to implement web applications is pretty limited to zero, involving java or python the choices explode to a,- hard to sort out -, mess of available 'frameworks' and application approaches. I want to sort out a clean MVC model, where the M stands for a fully blown (POCO, POJO driven) domain model (according M.Fowler's EAA pattern) using a mature OO language (Java,C++) for implementation. The background is: I have a system with certain hardware components (that introduce system immanent active behavior) and a configuration database for system meta and HW-components configuration data (these are even usually self contained, since the HW-components are capable to persist their configuration data anyway). For realization of the configuration/status data exchange protocol with the HW-components we have chosen the Google Protobuf format, which works well for the directly wired communication with these components. This protocol is already used successfully with a Java based GUI application via TCP/IP connection to the main system controlling HW-component. This application has some drawbacks and design flaws for historical reasons. Now we want to develop an abstract model (domain model) for configuration and monitoring those HW-components, that represents a more use case oriented view to the overall system behavior. I have the feeling that a plain Java class model would fit best for this (c++ implementation seems to have too much implementation/integration overhead with viable language-bridge interfaces). Google Protobuf message definitions could still serve well to describe DTO objects used to interact with a domain model API. But integrating Google Protobuf messages client side for e.g. data binding in the current view doesn't seem to be a good choice. I'm thinking about some extra serialization features, e.g. for JSON based data exchange with the views/controllers. Most lightweight solutions seem to involve a python based presentation layer using JSON based data transfer (I'm at least not sure to be fully informed about this). Is there some lightweight (applicable for a limited ARM Linux platform) framework available, supporting such architecture to realize a web-application? UPDATE: According to my recent research and comments of colleagues I've noticed that using Java (and some JVM) might not be the preferable choice for integration with python on a limited linux system as we have (running on ARM9 with hard to discuss memory and MCU costs), but C/C++ modules would do well for this (since this forms the native interface to python extensions, doesn't it?). I can imagine to provide a domain model from an appropriate C/C++ API (though I still think it's more efforts and higher skill requirements for the involved developers to do with these languages). Still I'm searching for a good approach that supports such architecture. I'll appreciate any pointers!

  Read the article

• Detecting which MCUs to connect on an incoming conference

  - by Fábio Batista

  Hello, SO. I'm working with the OCS UCCAPI, developing a custom OCS client. I'm currently having a hard time detecting what "kind" of Conference my client is being invited to. Using the Office Communicator client, I can start "IM conferences" (by inviting more than 1 person and selecting "start a IM conversation") or "video conferences" (by selecting more than 1 person and selecting "start a video call"). The Office Communicator client, on the invitees' end, starts correctly the appropriate session (just IM, just Video or IM+Video). However, when receiving the conference invite on my custom client, there's no data about the kind of session I'm being invited. I need this information, in order to make a decision whether or not to connect to the AV MCU and capture/show video. I've tried already: When handling _IUccSessionManagerEvents.OnIncomingSession, parse the RemoteSessionDescription property on the UccIncomingInvitationEvent object: no luck, the only data about the conference modality is an element on the XML about the IM being enabled or not (<im available="true"> or <im available="false">), but nothing about the session having video available or not. When handling _IUccConferenceSessionEvents.OnEnter, check the Media property on the UccConferenceSession. Don't work, all media types are present (MESSAGE, AUDIO, VIDEO, DATA e TELEPHONY), regardless of the type of conference I'm being invited. Also when handling _IUccConferenceSessionEvents.OnEnter, check the Entities collection on the UccConferenceView object, to check which MCUs are enabled for this conference. Don't work either, all MUCs are listed as available (IM, AV, DATA and CONTROL), regardless of the type of conference I'm being invited. I'm running out of ideas. Some references I'm using: http://msdn.microsoft.com/en-us/library/bb664307.aspx http://msdn.microsoft.com/en-us/library/dd170830.aspx Thanks a lot.

  Read the article

• Declaration of arrays before "normal" variables in c?

  - by bjarkef

  Hi We are currently developing an application for a msp430 MCU, and are running into some weird problems. We discovered that declaring arrays withing a scope after declaration of "normal" variables, sometimes causes what seems to be undefined behavior. Like this: foo(int a, int *b); int main(void) { int x = 2; int arr[5]; foo(x, arr); return 0; } foo sometimes is passed a pointer as the second variable, that does not point to the arr array. We verify this by single stepping through the program, and see that the value of the arr variable in the main scope is not the same as the value of the b pointer variable in the foo scope. And no, this is not really reproduceable, we have just observed this behavior once in a while. Changing the example seems to solve the problem, like this: foo(int a, int *b); int main(void) { int arr[5]; int x = 2; foo(x, arr); return 0; } Does anybody have any input or hints as to why we experience this behavior? Or similar experiences? The MSP430 programming guide specifies that code should conform to the ANSI C89 spec. and so I was wondering if it says that arrays has to be declared before non-array variables? Any input on this would be appreciated.

  Read the article

• What is the fastest way to do division in C for 8bit MCUs?

  - by Jordan S

  I am working on the firmware for a device that uses an 8bit mcu (8051 architecture). I am using SDCC (Small Device C Compiler). I have a function that I use to set the speed of a stepper motor that my circuit is driving. The speed is set by loading a desired value into the reload register for a timer. I have a variable, MotorSpeed that is in the range of 0 to 1200 which represents pulses per second to the motor. My function to convert MotorSpeed to the correct 16bit reload value is shown below. I know that float point operations are pretty slow and I am wondering if there is a faster way of doing this... void SetSpeed() { float t = MotorSpeed; unsigned int j = 0; t = 1/t ; t = t / 0.000001; j = MaxInt - t; TMR3RL = j; // Set reload register for desired freq return; }

  Read the article

• Converting to async,await using async targeting package

  - by e4rthdog

  I have this: private void BtnCheckClick(object sender, EventArgs e) { var a = txtLot.Text; var b = cmbMcu.SelectedItem.ToString(); var c = cmbLocn.SelectedItem.ToString(); btnCheck.BackColor = Color.Red; var task = Task.Factory.StartNew(() => Dal.GetLotAvailabilityF41021(a, b, c)); task.ContinueWith(t => { btnCheck.BackColor = Color.Transparent; lblDescriptionValue.Text = t.Result.Description; lblItemCodeValue.Text = t.Result.Code; lblQuantityValue.Text = t.Result.AvailableQuantity.ToString(); },TaskScheduler .FromCurrentSynchronizationContext() ); LotFocus(true); } and i followed J. Skeet's advice to move into async,await in my .NET 4.0 app. I converted into this: private async void BtnCheckClick(object sender, EventArgs e) { var a = txtLot.Text; var b = cmbMcu.SelectedItem.ToString(); var c = cmbLocn.SelectedItem.ToString(); btnCheck.BackColor = Color.Red; JDEItemLotAvailability itm = await Task.Factory.StartNew(() => Dal.GetLotAvailabilityF41021(a, b, c)); btnCheck.BackColor = Color.Transparent; lblDescriptionValue.Text = itm.Description; lblItemCodeValue.Text = itm.Code; lblQuantityValue.Text = itm.AvailableQuantity.ToString(); LotFocus(true); } It works fine. What confuses me is that i could do it without using Task but just the method of my Dal. But that means that i must have modified my Dal method, which is something i dont want? I would appreciate if someone would explain to me in "plain" words if what i did is optimal or not and why. Thanks P.s. My dal method public bool CheckLotExistF41021(string _lot, string _mcu, string _locn) { using (OleDbConnection con = new OleDbConnection(this.conString)) { OleDbCommand cmd = new OleDbCommand(); cmd.CommandText = "select lilotn from proddta.f41021 " + "where lilotn = ? and trim(limcu) = ? and lilocn= ?"; cmd.Parameters.AddWithValue("@lotn", _lot); cmd.Parameters.AddWithValue("@mcu", _mcu); cmd.Parameters.AddWithValue("@locn", _locn); cmd.Connection = con; con.Open(); OleDbDataReader rdr = cmd.ExecuteReader(); bool _retval = rdr.HasRows; rdr.Close(); con.Close(); return _retval; } }

  Read the article

• Writing Device Drivers for Microcontrollers, where to define IO Port pins?

  - by volting

  I always seem to encounter this dilemma when writing low level code for MCU's. I never know where to declare pin definitions so as to make the code as reusable as possible. In this case Im writing a driver to interface an 8051 to a MCP4922 12bit serial DAC. Im unsure how/where I should declare the pin definitions for The CS(chip select) and LDAC(data latch) for the DAC. At the moment there declared in the header file for the driver. Iv done a lot of research trying to figure out the best approach but havent really found anything. Im basically want to know what the best practices... if there are some books worth reading or online information, examples etc, any recommendations would be welcome. Just a snippet of the driver so you get the idea /** @brief This function is used to write a 16bit data word to DAC B -12 data bit plus 4 configuration bits @param dac_data A 12bit word @param ip_buf_unbuf_select Input Buffered/unbuffered select bit. Buffered = 1; Unbuffered = 0 @param gain_select Output Gain Selection bit. 1 = 1x (VOUT = VREF * D/4096). 0 =2x (VOUT = 2 * VREF * D/4096) */ void MCP4922_DAC_B_TX_word(unsigned short int dac_data, bit ip_buf_unbuf_select, bit gain_select) { unsigned char low_byte=0, high_byte=0; CS = 0; /**Select the chip*/ high_byte |= ((0x01 << 7) | (0x01 << 4)); /**Set bit to select DAC A and Set SHDN bit high for DAC A active operation*/ if(ip_buf_unbuf_select) high_byte |= (0x01 << 6); if(gain_select) high_byte |= (0x01 << 5); high_byte |= ((dac_data >> 8) & 0x0F); low_byte |= dac_data; SPI_master_byte(high_byte); SPI_master_byte(low_byte); CS = 1; LDAC = 0; /**Latch the Data*/ LDAC = 1; }

  Read the article

1 2  | Next Page >