Search Results

Search found 21 results on 1 pages for 'merlin'.

Page 1/1 | 1 

  • Get to Know a Candidate (2 of 25): Merlin Miller–American Third Position Party

    - by Brian Lanham
    DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Meet Merlin Miller of American Third Position Party In addition to being American Third Position Party nominee, Miller is an independent film maker.  He is a graduate of West Point and has commanded two units in the United States Army.  After military service he worked as an industrial engineering manager for Michelin Tire.  He learned about film making by earning an MFA from the University of Southern California. Mr. Miller is on the ballot in: CO, NJ, and TN. In the 2000’s, Miller began taking an increasingly paleoconservative political stance.  He claimed that Hollywood “ surreptitiously seeks to destroy our European-American heritage and our Christian-based traditional values, and replace them with values that debase these traditional values and elevate minorities as paragons of virtue and wisdom....Today’s motion pictures, in concert with other forms of mass media entertainment, are the greatest enemies to the well-being of our progeny and the future of our country.” Miller states that he "doesn't like" interracial marriage; however, he does not support outlawing interracial marriage, either.  Miller has denied being anti-Semitic, instead claiming that he merely opposes "favoritism" granted to Jews in the film industry.  He also opposes illegal immigration and what he refers to as "wide open borders" in the United States. The American Third Position Party (A3P) is a third positionist American political party which promotes white supremacy.  It was officially launched in January 2010 (although in November 2009 it filed papers to get on a ballot in California) partially to channel the right-wing populist resentment engendered by the financial crisis of 2007–2010 and the policies of the Obama administration and defines its principal mission as representing the political interests of white Americans. The party takes a strong stand against immigration and globalization, and strongly supports an anti-interventionist foreign policy. Although the party does not support labor unions, they do strongly support the labor rights of the American working class on a platform of placing American workers first over illegal immigrant workers and banning of overseas corporate relocation of American industry and technology Third Position or Third Alternative refers to a revolutionary nationalist political position that emphasizes its opposition to both communism and capitalism. Advocates of Third Position politics typically present themselves as "beyond left and right", instead claiming to syncretize radical ideas from both ends of the political spectrum Learn more about Merlin Miller and American Third Position Party on Wikipedia.

    Read the article

  • Watir with IronRuby!

    - by azamsharp
    Has anyone used Watir with IronRuby successfully? I am getting an error that the required file 'Watir' was not found. What path do I need to set to get this file to work in IronRuby? For some reason my igem command is not working: C:\DevTools\IronRuby\ironruby\Merlin\Main\Languages\Ruby\Scripts\binigem instal l watir '"C:\DevTools\IronRuby\ironruby\Merlin\Main\Languages\Ruby\Scripts\bin\ir.exe"' is not recognized as an internal or external command, operable program or batch file. I am using 0.9 version of Ironruby. I remember that in 0.9 you have to indicate the ir tool: I used the following and got the error again! C:\DevTools\IronRuby\ironruby\Merlin\Main\Languages\Ruby\Scripts\binir igem ins tall watir ERROR: While executing gem ... (RangeError) bignum too big to convert into Fixnum The current version of RubyGems is 1.3.5: C:\DevTools\IronRuby\ironruby\Merlin\Main\Languages\Ruby\Scripts\binir igem -v 1.3.5 I even tried using the full path: require File.dirname(__FILE__) + "C:/ruby/lib/ruby/gems/1.8/gems/commonwatir-1.6.2/lib/watir.rb"

    Read the article

  • wss4j: - Cannot find key for alias: monit

    - by feiroox
    Hi I'm using axis1.4 and wss4j. When I define in client-config.wsdd for WSDoAllSender and WSDoAllReceiver different signaturePropFiles where I have different key stores defined with different certificates, I'm able to have different certificates for sending and receiving. But when I use the same signaturePropFiles' with the same keystore. I get this message when I try to send a message: org.apache.ws.security.components.crypto.CryptoBase -- Cannot find key for alias: [monit] in keystore of type [jks] from provider [SUN version 1.5] with size [2] and aliases: {other, monit} - Error during Signature: ; nested exception is: org.apache.ws.security.WSSecurityException: Signature creation failed; nested exception is: java.lang.Exception: Cannot find key for alias: [monit] org.apache.ws.security.WSSecurityException: Error during Signature: ; nested exception is: org.apache.ws.security.WSSecurityException: Signature creation failed; nested exception is: java.lang.Exception: Cannot find key for alias: [monit] at org.apache.ws.security.action.SignatureAction.execute(SignatureAction.java:60) at org.apache.ws.security.handler.WSHandler.doSenderAction(WSHandler.java:202) at org.apache.ws.axis.security.WSDoAllSender.invoke(WSDoAllSender.java:168) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:127) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) at cz.ing.oopf.model.wsclient.ModelWebServiceSoapBindingStub.getStatus(ModelWebServiceSoapBindingStub.java:213) at cz.ing.oopf.wsgemonitor.monitor.util.MonitorUtil.checkStatus(MonitorUtil.java:18) at cz.ing.oopf.wsgemonitor.monitor.Test02WsMonitor.runTest(Test02WsMonitor.java:23) at cz.ing.oopf.wsgemonitor.Main.main(Main.java:75) Caused by: org.apache.ws.security.WSSecurityException: Signature creation failed; nested exception is: java.lang.Exception: Cannot find key for alias: [monit] at org.apache.ws.security.message.WSSecSignature.computeSignature(WSSecSignature.java:721) at org.apache.ws.security.message.WSSecSignature.build(WSSecSignature.java:780) at org.apache.ws.security.action.SignatureAction.execute(SignatureAction.java:57) ... 15 more Caused by: java.lang.Exception: Cannot find key for alias: [monit] at org.apache.ws.security.components.crypto.CryptoBase.getPrivateKey(CryptoBase.java:214) at org.apache.ws.security.message.WSSecSignature.computeSignature(WSSecSignature.java:713) ... 17 more How to have two certificates for wss4j in the same keystore? why it cannot find my certificate there when i have two certificates in one keystore. I have the same password for both certificates regarding PWCallback (CallbackHandler) My properties file: org.apache.ws.security.crypto.provider=org.apache.ws.security.components.crypto.Merlin org.apache.ws.security.crypto.merlin.keystore.type=jks org.apache.ws.security.crypto.merlin.keystore.password=keystore org.apache.ws.security.crypto.merlin.keystore.alias=monit org.apache.ws.security.crypto.merlin.alias.password=*** org.apache.ws.security.crypto.merlin.file=key.jks My client-config.wsdd: <deployment xmlns="http://xml.apache.org/axis/wsdd/" xmlns:java="http://xml.apache.org/axis/wsdd/providers/java"> <globalConfiguration> <requestFlow> <handler name="WSSecurity" type="java:org.apache.ws.axis.security.WSDoAllSender"> <parameter name="user" value="monit"/> <parameter name="passwordCallbackClass" value="cz.ing.oopf.common.ws.PWCallback"/> <parameter name="action" value="Signature"/> <parameter name="signaturePropFile" value="monit.properties"/> <parameter name="signatureKeyIdentifier" value="DirectReference" /> <parameter name="mustUnderstand" value="0"/> </handler> <handler type="java:org.apache.axis.handlers.JWSHandler"> <parameter name="scope" value="session"/> </handler> <handler type="java:org.apache.axis.handlers.JWSHandler"> <parameter name="scope" value="request"/> <parameter name="extension" value=".jwr"/> </handler> </requestFlow> <responseFlow> <handler name="DoSecurityReceiver" type="java:org.apache.ws.axis.security.WSDoAllReceiver"> <parameter name="user" value="other"/> <parameter name="passwordCallbackClass" value="cz.ing.oopf.common.ws.PWCallback"/> <parameter name="action" value="Signature"/> <parameter name="signaturePropFile" value="other.properties"/> <parameter name="signatureKeyIdentifier" value="DirectReference" /> </handler> </responseFlow> </globalConfiguration> <transport name="http" pivot="java:org.apache.axis.transport.http.HTTPSender"> </transport> </deployment> Listing from keytool: keytool -keystore monit-key.jks -v -list Enter keystore password: Keystore type: JKS Keystore provider: SUN Your keystore contains 2 entries Alias name: other Creation date: Jul 22, 2009 Entry type: PrivateKeyEntry Certificate chain length: 1 Certificate[1]: .... Alias name: monit Creation date: Oct 19, 2009 Entry type: trustedCertEntry

    Read the article

  • Getting Rails Application Running Under IronRuby Rack

    - by NotMyself
    Anyone else playing with ironruby? I have successfully got the IronRuby.Rails.Example project running on my local machine under IIS 5.1. I am now attempting to get my own demo rails site running in the same way. My web.config is slightly different from the example project. I am attempting to only use what was distributed with IronRuby 1.0 and what I have installed using gems. I am getting the following error which doesn't give me a lot to go on: D:/demo/config/boot.rb:66:in `exit': exit (SystemExit) After trying many different things, I think it is having a problem finding gems. I have attached my web config and ironrack.log. Does anyone have pointers on what I am doing wrong? Thanks! <?xml version="1.0"?> <configuration> <configSections> <!-- custom configuration section for DLR hosting --> <section name="microsoft.scripting" type="Microsoft.Scripting.Hosting.Configuration.Section, Microsoft.Scripting" requirePermission="false"/> </configSections> <system.webServer> <handlers> <!-- clear all other handlers first. Don't do this if you have other handlers you want to run --> <clear/> <!-- This hooks up the HttpHandler which will dispatch all requests to Rack --> <add name="IronRuby" path="*" verb="*" type="IronRuby.Rack.HttpHandlerFactory, IronRuby.Rack" resourceType="Unspecified" requireAccess="Read" preCondition="integratedMode"/> </handlers> </system.webServer> <system.web> <!-- make this true if you want to debug any of the DLR code, IronRuby.Rack, or your own managed code --> <compilation debug="true"/> <httpHandlers> <!-- clear all other handlers first. Don't do this if you have other handlers you want to run --> <clear/> <!-- This hooks up the HttpHandler which will dispatch all requests to Rack --> <add path="*" verb="*" type="IronRuby.Rack.HttpHandlerFactory, IronRuby.Rack" /> </httpHandlers> </system.web> <!-- DLR configuration. Set debugMode to "true" if you want to debug your dynamic language code with VS --> <microsoft.scripting debugMode="false"> <options> <!-- Library paths: make sure these paths are correct --> <!--<set option="LibraryPaths" value="..\..\..\Languages\Ruby\libs\; ..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\site_ruby\1.8\; ..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\1.8\"/>--> <set option="LibraryPaths" value="C:\IronRuby\lib\IronRuby;C:\IronRuby\lib\ruby\1.8;C:\IronRuby\lib\ruby\site_ruby;C:\IronRuby\lib\ruby\site_ruby\1.8"/> </options> </microsoft.scripting> <appSettings> <add key="AppRoot" value="."/> <add key="Log" value="ironrack.log"/> <!-- <add key="GemPath" value="..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\gems\1.8"/> --> <add key="GemPath" value="C:\IronRuby\Lib\ironruby\gems\1.8\gems"/> <add key="RackEnv" value="production"/> </appSettings> </configuration> === Booting ironruby-rack at 4/15/2010 1:27:12 PM [DEBUG] >>> TOPLEVEL_BINDING = binding => Setting GEM_PATH: 'C:\\IronRuby\\Lib\\ironruby\\gems\\1.8\\gems' => Setting RACK_ENV: 'production' => Loading RubyGems [DEBUG] >>> require 'rubygems' => Loading Rack >=1.0.0 [DEBUG] >>> gem 'rack', '>=1.0.0';require 'rack' => Loaded rack-1.1 => Application root: 'D:\\demo' => Loading Rack application [DEBUG] >>> Rack::Builder.new { ( require "config/environment" ENV['RAILS_ENV'] = 'development' use Rails::Rack::LogTailer use Rails::Rack::Static run ActionController::Dispatcher.new ) }.to_app exit D:/demo/config/boot.rb:66:in `exit': exit (SystemExit) from D:/demo/config/boot.rb:66:in `load_rails_gem' from D:/demo/config/boot.rb:54:in `load_initializer' from D:/demo/config/boot.rb:38:in `run' from D:/demo/config/boot.rb:11:in `boot!' from D:/demo/config/boot.rb:110 from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from D:/demo/config/environment.rb:7 from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from (eval):1 from C:/IronRuby/lib/ironruby/gems/1.8/gems/rack-1.1.0/lib/rack/builder.rb:46:in `instance_eval' from C:/IronRuby/lib/ironruby/gems/1.8/gems/rack-1.1.0/lib/rack/builder.rb:46:in `initialize' from (eval):0 from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\RubyEngine.cs:52:in `Execute' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\RubyEngine.cs:45:in `Execute' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\Application.cs:68:in `Rackup' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\Application.cs:32:in `.ctor' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\HttpHandlerFactory.cs:37:in `GetHandler' from System.Web:0:in `MapHttpHandler' from System.Web:0:in `System.Web.HttpApplication.IExecutionStep.Execute' from System.Web:0:in `ExecuteStep' from System.Web:0:in `ResumeSteps' from System.Web:0:in `System.Web.IHttpAsyncHandler.BeginProcessRequest' from System.Web:0:in `ProcessRequestInternal' from System.Web:0:in `ProcessRequestNoDemand' from System.Web:0:in `ProcessRequest'

    Read the article

  • mosh-like port forwarding

    - by Marc Merlin
    This is on linux, connecting to linux servers: I love mosh, but it doesn't support port forwarding, and likely won't for a while since it's been almost a year now and it hasn't happened yet. port forwarding over ssh is great, but because my laptop moves between networks several times a day, my ssh sessions die, and so do the port forwards. I could script/hack something to detect hung ssh and reconnect to get my port forwards back, but before I do this, is there another way to do long lasting port forwards when your source IP changes several times daily (because you go on different networks)? I'm thinking an ssh over UDP would do the trick but of course ssh is over TCP.

    Read the article

  • Nginx and Passenger deploy issue

    - by merlin
    Currently I can only get the default nginx page to come up on my domain name. I am pretty sure the error is either in the /etc/hosts file or the enginx.config file. my /etc/hosts file is 127.0.0.1 localhost.localdomain localhost myip server.mydomain.com server and nginx.config is: server { listen 80; server_name server.mydomain.com; root /whatever/pulic; passenger_enabled on; rails_env production; I don't get any errors in the log. Incidentally I can run mongrel and on mydomain:3000 see the application there.

    Read the article

  • unknown action with will_paginate

    - by merlin
    In my users controller I have this in a method: @users = User.paginate :page => params[:page], :per_page => 10, The results are rendered on users/search. The 2nd page link points to users/search?page=2, but it leads to an unknown action error.

    Read the article

  • Finding Line Beginning using Regular expression in Notepad++

    - by Michel Merlin
    Finding Line Beginning using Regular expression in Notepad++ (Sorry for this newbie question) I want to strip a 4000-line HTML file from all the jQuery "done" stuff, e.g.: <DIV class=menu done27="1" done26="0" done9="1" done8="0" done7="1" done6="0" done4="20"> should be replaced with: <DIV class=menu> In http://www.zytrax.com/tech/web/regex.htm#experiment I can do it with RE: [ ^]done[0-9]+="[0-9]+" but in Notepad++ 5.6.8 UNICODE Search Find, Search mode = Regular expression, putting this RE in the "Find what" field won't work (it will only find the 5 occurrences starting with a space, it will miss the 2 occurrences starting at the beginning of a line; IOW, the caret for line beginning, or the alternating it with a space, fails). How do I? TIA, Versailles, Wed 21 Apr 2010 10:18:20 +0200

    Read the article

  • Finding Line Beginning using Regular expression in Notepad++

    - by Michel Merlin
    Finding Line Beginning using Regular expression in Notepad++ (Sorry if this is a newbie question) I want to strip a 4000-line HTML file from all the jQuery "done" stuff, e.g.: <DIV class=menu done27="1" done26="0" done9="1" done8="0" done7="1" done6="0" done4="20"> should be replaced with: <DIV class=menu> In http://www.zytrax.com/tech/web/regex.htm#experiment I can do it with RE: [ ^]done[0-9]+="[0-9]+" but in Notepad++ 5.6.8 UNICODE, in a .HTM file encoded in ANSI, Search Find, Search mode = Regular expression, putting this RE in the "Find what" field won't work (it will only find the 5 occurrences starting with a space, it will miss the 2 occurrences starting at the beginning of a line; IOW, the caret for line beginning, or the alternating it with a space, fails). How do I? TIA, Versailles, Wed 21 Apr 2010 10:42:20 +0200

    Read the article

  • mimicking iPhone main screen slide in JavaScript

    - by Merlin
    Hi, I'd like to mimick iPhone main screen in JavaScript on Safari / Chrome / Firefox. By mimicking I mean: - Having a couple of pages - Switching between the pages by clicking & dragging / swiping with my mouse - Having those dots from the bottom iPhone main screen displaying which page it is The closest to what I want is: http://jquery.hinablue.me/jqiphoneslide/ But the sliding doesn't work nearly as good as in iPhone (i have to slide first, and the animation appears after i release the mouse button), and there are no dots at the bottom.

    Read the article

  • django: _init_ def work but does not update to class in django form

    - by tgngo
    Hi expert there, this is my form: class IPTrackerSearchForm(forms.Form): keyword = forms.CharField(max_length=100, widget=forms.TextInput(attrs={'size':'50'})) search_in = forms.ChoiceField(required=False, choices=ANY_CHOICE + MODULE_SEARCH_IN_CHOICES) product = forms.CharField(max_length=64,widget=forms.TextInput(attrs={'size':'50'})) family = forms.CharField(max_length=64,widget=forms.TextInput(attrs={'size':'50'})) temp_result = Merlin.objects.values('build').distinct() result = [(value['build'], value['build']) for value in temp_result] build = forms.ChoiceField(choices=ANY_CHOICE + result) circuit_name = forms.CharField(max_length=256,widget=forms.TextInput(attrs={'size':'50'})) parameterization = forms.CharField(max_length=1024,widget=forms.TextInput(attrs={'size':'50'})) metric = forms.CharField(max_length=64,widget=forms.TextInput(attrs={'size':'50'})) show_in_one_page = forms.BooleanField(required=False, label="Show filtered result in one page", widget=forms.CheckboxInput(attrs={'class':'checkbox'})) def __init__(self, *args, **kwargs): super(IPTrackerSearchForm, self).__init__(*args, **kwargs) temp_result = Merlin.objects.values('build').distinct() self.result = [(value['build'], value['build']) for value in temp_result] self.build = forms.ChoiceField(choices=ANY_CHOICE + self.result) print self.result With the purpose that, each time I refresh the webpage, when have new record to "build" column in database. It should update to the drop down box "build" here but It never update unless restart the server. I use print and see that ini detect new recrd but can notrefect to build in Class. Many thanks

    Read the article

  • Malicious content on server - next steps advice [closed]

    - by Under435
    Possible Duplicate: My server's been hacked EMERGENCY I just got an e-mail from my hosting company that they got a report of malicious content being hosted on my vps. I was unaware of this and started looking into it. I discovered a file called /var/www/mysite.com/osc.htm. Soon after I discovered some weird php files wp-includes.php and ndlist.php both recognized as being PHP/WebShell.A.1 virus. I removed all these files but I'm unsure of what to do next. Can anyone help me analyze the output below of sudo netstat -A inet -p -e and give advice on what's best to do next. Thanks very much in advance Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 localhost.localdo:mysql localhost.localdo:37495 TIME_WAIT root 0 - tcp 0 1 mysite.com:50524 xnacreators.net:smtp SYN_SENT Debian-exim 69746 25848/exim4 tcp 0 0 mysite.com:www tha165.thehealtha:37065 TIME_WAIT root 0 - tcp 0 0 localhost.localdo:37494 localhost.localdo:mysql TIME_WAIT root 0 - udp 0 0 mysite.com:59447 merlin.ensma.fr:ntp ESTABLISHED ntpd 3769 2522/ntpd udp 0 0 mysite.com:36432 beast.syus.org:ntp ESTABLISHED ntpd 4357 2523/ntpd udp 0 0 mysite.com:48212 formularfetischiste:ntp ESTABLISHED ntpd 3768 2522/ntpd udp 0 0 mysite.com:46690 formularfetischiste:ntp ESTABLISHED ntpd 4354 2523/ntpd udp 0 0 mysite.com:35009 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 4356 2523/ntpd udp 0 0 mysite.com:58702 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 3770 2522/ntpd udp 0 0 mysite.com:49583 merlin.ensma.fr:ntp ESTABLISHED ntpd 4355 2523/ntpd udp 0 0 mysite.com:56290 beast.syus.org:ntp ESTABLISHED ntpd 3771 2522/ntpd

    Read the article

  • Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

    - by MasterRoot24
    I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

    Read the article

  • Web-Based User Help System for Silverlight

    - by Mark Roxberry
    I've been googling and binging all morning to find a suitable solution for web-based user help. We've got Sandcastle for dev help, but I'm wondering what people are using for user help for a Silverlight project? I'm interested in options from rolling our own to a comprehensive help doc system. (And is HTML Help dead? the GUI still has Merlin the wizard from days gone by).

    Read the article

  • Looking for Light Time Management Software Suggestions (for Mac)

    - by tmo256
    I'm looking for a simple project management app that performs task scheduling, along the line of Merlin or MS Project, but no where near as robustly. I don't need to deal with other (human) resources, but I work on anything from 3 to 6 different projects at a time. What I'd like is to be able to input deadlines and tasks, and have a schedule suggested to complete them. I do technical work, but I don't think I need anything specifically for software development, especially considering I do plenty of other kinds of things, like graphic design and social media PR. I'd really like this to be dead simple, as simple as possible. Suggestions? OmniPlan, something web-based? Definitely cannot afford anything too extravagant, really looking for something under $200. Thanks for your input!

    Read the article

  • Looking for Light Time Management Software Suggestions (for Mac)

    - by tmo256
    I'm looking for a simple project management app that performs task scheduling, along the line of Merlin or MS Project, but no where near as robustly. I don't need to deal with other (human) resources, but I work on anything from 3 to 6 different projects at a time. What I'd like is to be able to input deadlines and tasks, and have a schedule suggested to complete them. I do technical work, but I don't think I need anything specifically for software development, especially considering I do plenty of other kinds of things, like graphic design and social media PR. I'd really like this to be dead simple, as simple as possible. Suggestions? OmniPlan, something web-based? Definitely cannot afford anything too extravagant, really looking for something under $200. Thanks for your input!

    Read the article

  • Why is my external USB hard drive sometimes completely inaccessible?

    - by Eliah Kagan
    I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

    Read the article

  • Day 2 - Game Design Documentation

    - by dapostolov
    So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

    Read the article

1