Search Results

Search found 6176 results on 248 pages for 'wireless encryption'.

Page 101/248 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• How do I get a 300Mbps connection over 802.11n?

  - by Daniel Schaffer

  I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• Logitech MX3200 keyboard stopped working

  - by Roy Rico

  I have a Logitech MX3200 wireless keyboard and mouse set, and keyboard stopped working. I was working with it and it just stopped in the middle of using it. Some notes: The mouse still works flawlessly, i've tried to reconnect the KB i've tried to reconnect everything, mouse reconnects, keyboard reconnects (or pretends to) I've tried to hard reset (holding the connect button on the receiver for 10 seconds). I've tried new batteries I took out the batteries out of the KB & Mouse and unplugged the receiver over night. The media keys still work (launches winamp) but they main keys does not At this point, i've tried everything I've seen online. I just want to know is my keyboard dead in the water? I would say it's been about 8 months to a year since i've bought it, and the articles i find on the internet all say that's as long as they last... is this true? what's everyone's experience? I hope it's not true.

  Read the article

• Multiple WAPs: Bandwidth, Frequency Considerations

  - by Pete Cresswell

  The router in my LAN closet does 2 and 5 GHz. In the kitchen, I have a single-band 2 GHz WAP, and in the garden shed I have another single-band 2 GHz WAP. All are set to Bandwidth = 40 MHz, Wireless Network Mode = N-Only. The kitchen WAP and the LAN closet router both come up with multiple bars on my smart phone from almost anywhere in the house. The garden shed WAP will register one bar... but only sometimes. The Questions: Are these things in danger of butting heads? Should I re-set them to Bandwidth = 20 MHz? Bandwidth = Auto? Are there any tools that I could use on an Android smart phone, iPod, or WiFi-enabled laptop to make my own analysis?

  Read the article

• Is it possible to sync specific router settings across multiple routers?

  - by Betard Fooser

  I recently purchased a second Linksys wireless routers set up on the other side of my home and I am wondering if it is possible to somehow sync particular settings between the two? For instance what I am really after is the "MAC Filter List". I would "like" to be able to maintain the list on both routers without having to manually type in the field values. maybe this isn't possible, or has an easy answer, but hopefully those of you who know will cut me a bit of slack. I tried to "google" the answer to this of course, but it seems any searches with the words "sync" and "router" and/or "wifi" result in pages of people having issues with synching their iOS devices over wifi. I would say that have decent amount of networking knowledge in regards to average home networks, and I imagine in larger businesses / corporations they must have a "simpler" way of maintaining things like this. Any insight to point me in the right direction will be much appreciated.

  Read the article

• wifi connection turns off oll the time

  - by er-v

  Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

  Read the article

• No Drivers in Ubuntu 9.1!!!

  - by Chris

  I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• Why do some devices seemingly need the wifi router to reboot before they can connect?

  - by CreeDorofl

  I've noticed a pattern but I'm not sure if it's a crappy router, crappy wireless device, or maybe everything is working as intended. I can wirelessly connect my office PC to the router's settings page for a day, maybe two, then afterwards I can't anymore until it's reset. Unrelated, but similar, in various places that offer free wifi, my kindle will connect fine most days, but occasionally won't unless the router is reset. After the reset, I connect ok. What's happening behind the scenes that makes a router stop allowing you to connect? Is it something on my end that's changing, or on the router's end?

  Read the article

• Why my router alows to connect to the internet only after plugging the cord to laptop?

  - by gennad

  Hi all! I'm using Ubuntu 10.10. I have D-link dir-320 wireless router. When I turn on my laptop Lenovo G555, I'm trying to connect to router by it's usually unsuccessful. But if I'll pull the ethernet cord from the router and insert it into my laptop, everything will work well. And if after that I'll pull the ethernet cord from the laptop and insert it into the router, my laptop connects to the router and it will have Internet access via wifi. How to make the laptop directly connects to the Internet after booting without switching the cord?

  Read the article

• PCs with Wired Connection Keep Losing Internet Connectivity

  - by user717452

  I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• Can't connect printer wirelessly to linksys wrt54g using WPS

  - by Mark J Seger

  I've already blown over 1/2 day on this. I keep checking and rechecking my router settings and they agree with what the documentation says for my brand new HP4620 printer. Supposedly I just tell the router to listen for connections and tell the printer to connect. It fails every time! Further, I have also read some opinions that when things are not configured correctly the linksys will disable WPS and it looks like that's happening as well. Further, it's causing other wireless devices in my house to lose there connectivity until I re-enable WPA networking on the router. Has anyone been here before? This is driving me crazy... -mark

  Read the article

• Automatically Connecting to Hidden SSID WiFi Network

  - by Zack

  My MacBook Pro will not automatically connect to a Wireless network with a hidden SSID. It makes me select the "Join Other Network..." in the Airport menu (in the system tray), where I need to input the name of the network, then security type, password and wait for it to connect. This is becoming increasingly annoying to have to do every time I come back to my desk. I'm running Mac OS X 10.5 and there doesn't seem to be an option to connect to a specific network, but rather "Preferred Networks." The only network I have set as Preferred that's in range is my home network, and it still doesn't automatically connect. Making the network publicly visible isn't under my control, so I'm stuck with what's currently in place. Reader's Digest version: How do I make my MacBook Pro automatically connect to a WiFi Network with a hidden SSID without having to "configure" it every time I want to connect?

  Read the article

• What would cause a single working website to not work on 1 out of 5 devices on a network?

  - by th3dude

  There is a specific website that loads up without problem on all machines on my network (both wired and wireless) except one laptop. This laptop is a Windows 7 machine that was just recovered using the recovery partition, so it is fresh. The site will not load in Firefox 3.6 or IE 8. The website is http://www.weightwacthers.com The site loads fine on my desktop, iPhone, and Droid, but not the laptop. In all my years in this business I've honestly never seen this happen. Also, 'Is it down for me or everyone' reports that it is indeed only me. What would cause this to happen?

  Read the article

• Can't connect to the internet in Windows Vista

  - by Kola

  I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Dealing with employees that use Hotspots? [closed]

  - by javasocute

  Recently a consultant revealed to me and my superiors that a particular department in my company had a tremendous decline in productivity over the past year. This department happened to mostly work with laptops and tablets and thus had wireless. Our barracuda did not display any vast amounts of internet entertainment and so I was initially puzzled by his statement. However he explained that more and more employees are using "hotspots" that when not broadcasted, become invisible to our network. So basically these people could connect to hotspots and watch youtube all day and we would never know it. The consultant also said that this was becoming an issue for many companies. So my question is, how can I detect invisible hotspots? I was browsing google and there are several different programs that can scan for such access points. But I am hoping to get a recommendation from the serverfault community. Thank you.

  Read the article

• Can I use my Belkin router as a repeater?

  - by Kyle R

  I've got a brand new, unopened Belkin N600 DB router (yay 50% off sale), and I can't seem to figure out if I can use it as a repeater. As far as I can tell, it doesn't support DD-WRT or Tomato, but I'm wondering if there may be some way to rig it up to repeat Wifi. Also, I really need to know before I open it, because, being a bit tight on money at the moment, I'll probably sell it if I can't use it as a repeater. Finally, two caveats: I can't use the other wireless router for anything other than broadcasting straight from the modem (parents are paranoid about anything technological). I can't run ethernet to the second router due to the layout of the house. Thanks so much for the help everyone--if I'm being vague, tell me! EDIT: Also, the manual here is pretty useless on this topic as far as I can tell.

  Read the article

• How can I make my laptop use a phone as a wi-fi adapter?

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

  Read the article

• Netgear WNDR3700 2.4GHz and 5GHz Wi-Fi are segregated

  - by Tim Sullivan

  I have a Netgear WNDR3700 with both the 2.4GHz (B/G/N) and 5GHz (A/N) broadcasting. I'd assumed that devices connecting on either channel would work together without issues, but there are some devices (such as my iPhone 4 or HP wireless printer) that will only connect at 2.4GHz, and some that connect at 5GHz. However, it seems that they're segregated on the network, so a computer at 5GHz can't print to the printer, but the iPhone can. This is causing issues not just with printing, but with AppleTV and so on. Is there a way to have the router let these devices all talk to each other?

  Read the article

• College wifi works easily on Linux, but not on Windows

  - by user52849

  In Linux: After connecting to the college wifi, going to the network login page logging in, the internet works perfectly as it should. In Windows: After connecting to the college wifi, going to the network login page, logging in, Windows shows "Internet access" and the wireless icon turns white. But still after that, regardless of the browser being used, attempting to accessing any page just shows "Sending request". It does work though after a lot of tries, but only in intervals. But when running Ubuntu 11.10 in VirtualBox, it works properly just like booting in Ubuntu, even if it isn't working on Windows. The college wifi service is really crappy and has been unable to solve this problem. I'm pretty sure there should be a solution for this, but what? What is it that Ubuntu is doing right and Windows isn't? Windows settings set to "Automatically detect settings" and no proxy server used.

  Read the article

• Share laptop wifi with router

  - by obie

  I hi guys i'm trying to accomplish something: i have a modem (ADSL) which servers as a wireless router as well. There's a laptop connected to it through cable. On the other room i have a laptop which is connected through the router wirelessly. Now the problem is, since i have other appliances that need to get connected but are not wifi cable i have another wifi router. What i want to know is how can i share the second laptop's wifi with the second router so that the router can then serve as an access point to give internet to my other applinaces through ethernet cables. so in breaf i want: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV

  Read the article

• Open a remote folder in windows mobile

  - by Luis

  I have a device with windows mobile 6.1 and I want to open a shared folder on my laptop with the file browser... Both are connected to the same wireless network, both have access to internet but I can't have access between them... I have used open path in the file explorer and nothing... I shut down the firewall on mi laptop but still I can't access.. I don't know anything about permissions if that is the problema because I'm a novice... if anyone can helpme I'll appreciate it a lot...Thanks...

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >