Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 110/514 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

    - by Ben Walker
    playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

    Read the article

  • ATI Radeon HD 5770 Cooling

    - by Murtez
    I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

    Read the article

  • Changing ati graphics setting into a batch file

    - by FrozenKing
    I want to change my saturation level to zero and again to default but I can do it manually by going to ati catalyst center. Since, I want to do it regularly I need some batch file code or program to alter this settings in a click or using shortcut keys. The reason I am doing this because I want to change my screen to black and white from color since b/w will make my eyes less tired then a colored display. I came to know about this saturation from my previously asked question : Changing display color from B/W to color (vice-versa)using a program.

    Read the article

  • Could today's windows update have caused boot problems?

    - by gjvdkamp
    I have a 64 bit box that is dual boot Windows 7 64bit and Ubuntu. I booted into windows today and saw the 'updates ready' sign on the shutdown button so I clicked to let it install. It took a while to install 2 updates. Then I rebooted but now it doesn't get past the motherboard splash screen. So I don't even get the disks found messages or let alone the prompt to choose windows or Linux. Cold this be caused by the updates? Seems weird for a windows patch to have consequences beyond the windows os, but it seems unlikely to be a coincidence Thanks, Gert-jan

    Read the article

  • Windows 8 Unable to perform hibernate

    - by Jones
    Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

    Read the article

  • How can I run 2 already installed OS at the same time?

    - by eran
    I have Win7 and Ubuntu installed on my PC, and I can choose which to run at boot time. I would like to be able to run the Ubuntu from within the Win7. Tools like VMWare allows one to create a new installation of a guest OS, which could then be run alongside the hosting OS. However, I already have the Ubuntu fully installed on my hard drive, and I'd like to maintain the dual boot option. Ideally, I'd like to be able to create a new virtual machine on my Win7, but instead of installing a new guest OS, just direct it to the existing installation. Is that possible?

    Read the article

  • Three server processes consume no more than 50% of Dual Core CPU

    - by thor
    I have three processes running on Intel Core 2 Duo CPU. From watching output of 'top' and graphs of CPU load (drawn by MRTG, data collection via SNMP) I can see that CPU load is never more than 50%, and, most of the day, when those processes are busy CPU load has a ceiling at 50 %. I mean, CPU load grows up to 50% in the morning and stays there until late evening. My first thought was that only one core was used at 100% thus giving 50% of both CPUs. But, as there are three processes running and from 'top' I see that both cores are being loaded, so this is not the case. schedtool shows that CPU affinity for those three processes is at default, 0x03, allowing them to use both cores. If I force one process to one core (schedtool -a 0x01), and two others to second (schedtool -a 0x02), cumulative usage grows beyond 50%. Why three processes seem to consume only 50% of two cores? Why forcing them to different CPUs allows usage to grow higher? Any hints? P.S. Processes in question are Counter-Strike servers.

    Read the article

  • Second monitor not detected

    - by Gabriel
    Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

    Read the article

  • How do I share my iPhoto photos with my ubuntu partition?

    - by Taryn East
    I have a MacBook Pro dual-booted with Snow Leopard and Ubuntu Karmic. I have recently imported hundreds of my photos into iPhoto - but I now want to be able to see them (and use them as desktop/screen saver images) from my Ubuntu partition (ie when the machine is running Ubuntu instead of MacOS). Is there an easy way to do this direct from the iPhoto library or do I have to shift them all out to an external file directory or something? Further edit - just to make it clear: I have already uploaded my photos directly into iPhoto - then spent many days categorising, tagging and uploading to flickr. Unless there's something I'm missing, I'm guessing it's likely too late to do the "don't copy into the iPhoto library" option. Happy to be proven wrong :) Perhaps somebody knows of a way to "export" the library without losing any of the current information - so that I can (from then on) keep the photos in an external library? I don't want to do this, though, if I lose the information that is currently there.

    Read the article

  • DVI to VGA adapter only working in one output

    - by Tom Jenkinson
    I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

    Read the article

  • Mini DV and DVI Conversion

    - by Kairan
    Video card is: AMD HD 6950 My video card comes with 1xHDMI, 2xDVI, and 2xMini DV ports. I have always used VGA and DVI only. I have the HDMI already connected. I want to hook up 2 more display. One of the display can take a VGA only, the other is an LCD TV so it has VGA, HDMI, Component. I am wondering: 1) What is the best output port to use for the second two monitors? The miniDV or the DVI? 2) I need to run a long cable maybe 15-25 feet, this might change the answer to question 1, is an HDMI long cable 20+ ft going to be better than a 20ft DVI or miniDV ?

    Read the article

  • Dual SMTP Server issue with Unicast Network Load Balancing

    - by Igor K
    Using two servers with NLB, each box contains IIS and a mail server. Server1 is the primary Server2 runs the backup mail server The problem is the web app sends email to ourselves. When mail is sent from Server2 (via its own SMTP server) to ourselves, it tries to contact Server1, as its the mail server IP. But under Unicast mode of NLB, it cant reach the host via the public dedicated IP address. How can we get round this?

    Read the article

  • Quickly navigating Emacs buffers on a dual display setup

    - by mwilliams
    If I have an Emacs frame on each of my displays, how can I easily navigate buffers between the two displays? I typically use shift + arrows to jump to the direction of the buffer I'm looking for, but with two frames, it won't jump. Is there a trick to this? Or do I need to give the other Emacs frame focus first (which is a step I would like to avoid).

    Read the article

  • How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

    - by MoLE
    I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

    Read the article

  • What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

    - by Alex R
    I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

    Read the article

  • Dual DC Time Service

    - by poconnor
    I believe I'm having an issue with my Domain Controllers and Time Server. On my back up DC, I keep seeing a warning stating "The time service has stopped advertising as a time source because the local clock is not synchronized." Does this mean that my backup DC believes it's a Time Server? My PDC should be the time server and I have gone through setting up the PDC as the time server. I was not around for the original setup of the time server with the old PDC and Backup DC. But I believe the old PDC was the time server so I setup the new PDC as the new time server, when I decommissioned the old PDC. Is it possible that the Backup DC was setup as the time server and it still thinks it's suppose to be giving out time to everyone? Registry for PDC has NTP Registry for Backup has NT5D5 Results of w32tm /monitor Getting AD DC list for default domain... Analyzing:delayoffset from DC1.local..com Stratum: 4 delayoffset from DC1.local..com Stratum: 3 Warning: Reverse name resolution is best effort. It may not be correct since RefID field in time packets differs across NTP implementations and may not be using IP addresses. DC2.local..com[192.168.1.8:123]: ICMP: 1ms NTP: -0.6349491s RefID: DC1.local..com [192.168.1.9] DC1.local..com *** PDC ***[192.168.1.9:123]: ICMP: 0ms NTP: +0.0000000s RefID: wwwco1test12.microsoft.com [65.55.21.20]

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

    - by kobaltz
    Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

    Read the article

  • How can I set up a dual-site Storage Daemon in Bacula (mirror the backup)

    - by Andy
    On site A, I have sucessfully set up a bacula director on one host, several File Daemons on the hosts I want to backup, and finally one Storage Daemon where the backup actually is stored. If disaster struck the building Site A, I want a second Storage Daemon on another site, Site B. The Filesets, Director etc would be the same, except the jobs will be stored on the other Storage Daemon as well. Are there any best practises on this?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Second Monitor "Input Not Supported"

    - by Drew
    I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >