Search Results

Search found 3141 results on 126 pages for 'zero r'.

Page 112/126 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

  • controlling threads flow

    - by owca
    I had a task to write simple game simulating two players picking up 1-3 matches one after another until the pile is gone. I managed to do it for computer choosing random value of matches but now I'd like to go further and allow humans to play the game. Here's what I already have : http://paste.pocoo.org/show/201761/ Class Player is a computer player, and PlayerMan should be human being. Problem is, that thread of PlayerMan should wait until proper value of matches is given but I cannot make it work this way. Logic is as follows: thread runs until matches equals to zero. If player number is correct at the moment function pickMatches() is called. After decreasing number of matches on table, thread should wait and another thread should be notified. I know I must use wait() and notify() but I can't place them right. Class Shared keeps the value of current player, and also amount of matches. public void suspendThread() { suspended = true; } public void resumeThread() { suspended = false; } @Override public void run(){ int matches=1; int which = 0; int tmp=0; Shared data = this.selectData(); String name = this.returnName(); int number = this.getNumber(); while(data.getMatches() != 0){ while(!suspended){ try{ which = data.getCurrent(); if(number == which){ matches = pickMatches(); tmp = data.getMatches() - matches; data.setMatches(tmp, number); if(data.getMatches() == 0){ System.out.println(" "+ name+" takes "+matches+" matches."); System.out.println("Winner is player: "+name); stop(); } System.out.println(" "+ name+" takes "+matches+" matches."); if(number != 0){ data.setCurrent(0); } else{ data.setCurrent(1); } } this.suspendThread(); notifyAll(); wait(); }catch(InterruptedException exc) {} } } } @Override synchronized public int pickMatches(){ Scanner scanner = new Scanner(System.in); int n = 0; Shared data = this.selectData(); System.out.println("Choose amount of matches (from 1 to 3): "); if(data.getMatches() == 1){ System.out.println("There's only 1 match left !"); while(n != 1){ n = scanner.nextInt(); } } else{ do{ n = scanner.nextInt(); } while(n <= 1 && n >= 3); } return n; } }

    Read the article

  • How do I get a screenshot of a given website using C#

    - by Ender
    I'm writing a specialised crawler and parser for internal use and I require the ability to take a screenshot of a web page in order to check what colours are being used throughout. The program will take in around ten web addresses and will save them as a bitmap image, from there I plan to use LockBits in order to create a list of the five most used colours within the image. To my knowledge it's the easiest way to get the colours used within a web page but if there is an easier way to do it please chime in with your suggestions. Anyway, I was going to use this program until I saw the price tag. I'm also fairly new to C#, having only used it for a few months. Can anyone provide me with a solution to my problem of taking a screenshot of a web page in order to extract the colour scheme? EDIT: Sorry for not getting back to this sooner, but I've been busy with some other things. Anyway, the code seems to work well, but the problem I am having right now is that I am running it within a form, and naturally with Application.Run() being called I cannot run two instances of the same form at once. It recommended Form.showDialog() but that broke everything. Can anyone give me a hand with this code? public static void buildScreenshotFromURL(string url) { int width = 800; int height = 600; using (WebBrowser browser = new WebBrowser()) { browser.Width = width; browser.Height = height; browser.ScrollBarsEnabled = true; // This will be called when the page finishes loading browser.DocumentCompleted += new System.Windows.Forms.WebBrowserDocumentCompletedEventHandler(OnDocumentCompleted); //browser.DocumentCompleted += OnDocumentCompleted; browser.Navigate(url); // This prevents the application from exiting until // Application.Exit is called // Application.Run() does not work as it cannot be called twice, recommended form.showDialog() // but still issues Application.Run(); } } public static void OnDocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { // Define size of thumbnail neded int thumbSize = 50; // Now that the page is loaded, save it to a bitmap WebBrowser browser = (WebBrowser)sender; using (Graphics graphics = browser.CreateGraphics()) { using (Bitmap bitmap = new Bitmap(browser.Width, browser.Height, graphics)) { Rectangle bounds = new Rectangle(0, 0, bitmap.Width, bitmap.Height); browser.DrawToBitmap(bitmap, bounds); Bitmap thumbBitmap = new Bitmap(bitmap.GetThumbnailImage(thumbSize, thumbSize, thumbCall, IntPtr.Zero)); thumbBitmap.Save("screenshot.png", ImageFormat.Png); handleImage(thumbBitmap); } }

    Read the article

  • Possible uncommitted transactions causing "System.Data.SqlClient.SqlException: Timeout expired" erro

    - by Michael
    My application requires a user to log in and allows them to edit a list of things. However, it seems that if the same user always logs in and out and edits the list, this user will run into a "System.Data.SqlClient.SqlException: Timeout expired." error. I've read comments about increasing the timeout period but I've also read a comment about it possibly caused by uncommitted transactions. And I do have one going in the application. I'll provide the code I'm working with and there is an IF statement in there that I was a little iffy about but it seemed like a reasonable thing to do. I'll just go over what's going on here, there is a list of objects to update or add into the database. New objects created in the application are given an ID of 0 while existing objects have their own ID's generated from the DB. If the user chooses to delete some objects, their IDs are stored in a separate list of Integers. Once the user is ready to save their changes, the two lists are passed into this method. By use of the IF statement, objects with ID of 0 are added (using the Add stored procedure) and those objects with non-zero IDs are updated (using the Update stored procedure). After all this, a FOR loop goes through all the integers in the "removal" list and uses the Delete stored procedure to remove them. A transaction is used for all this. Public Shared Sub UpdateSomethings(ByVal SomethingList As List(Of Something), ByVal RemovalList As List(Of Integer)) Using DBConnection As New SqlConnection(conn) DBConnection.Open() Dim MyTransaction As SqlTransaction MyTransaction = DBConnection.BeginTransaction() Try For Each SomethingItem As Something In SomethingList Using MyCommand As New SqlCommand() MyCommand.Connection = DBConnection If SomethingItem.ID > 0 Then MyCommand.CommandText = "UpdateSomething" Else MyCommand.CommandText = "AddSomething" End If MyCommand.Transaction = MyTransaction MyCommand.CommandType = CommandType.StoredProcedure With MyCommand.Parameters If MyCommand.CommandText = "UpdateSomething" Then .Add("@id", SqlDbType.Int).Value = SomethingItem.ID End If .Add("@stuff", SqlDbType.Varchar).Value = SomethingItem.Stuff End With MyCommand.ExecuteNonQuery() End Using Next For Each ID As Integer In RemovalList Using MyCommand As New SqlCommand("DeleteSomething", DBConnection) MyCommand.Transaction = MyTransaction MyCommand.CommandType = CommandType.StoredProcedure With MyCommand.Parameters .Add("@id", SqlDbType.Int).Value = ID End With MyCommand.ExecuteNonQuery() End Using Next MyTransaction.Commit() Catch ex As Exception MyTransaction.Rollback() 'Exception handling goes here End Try End Using End Sub There are three stored procedures used here as well as some looping so I can see how something can be holding everything up if the list is large enough. Other users can log in to the system at the same time just fine though. I'm using Visual Studio 2008 to debug and am using SQL Server 2000 for the DB.

    Read the article

  • Getting a screenshot of a page using C# - Need help with code

    - by Ender
    I'm writing a specialised crawler and parser for internal use and I require the ability to take a screenshot of a web page in order to check what colours are being used throughout. The program will take in around ten web addresses and will save them as a bitmap image, from there I plan to use LockBits in order to create a list of the five most used colours within the image. To my knowledge it's the easiest way to get the colours used within a web page but if there is an easier way to do it please chime in with your suggestions. Anyway, I was going to use this program until I saw the price tag. I'm also fairly new to C#, having only used it for a few months. Can anyone provide me with a solution to my problem of taking a screenshot of a web page in order to extract the colour scheme? EDIT: Sorry for not getting back to this sooner, but I've been busy with some other things. Anyway, the code seems to work well, but the problem I am having right now is that I am running it within a form, and naturally with Application.Run() being called I cannot run two instances of the same form at once. It recommended Form.showDialog() but that broke everything. Can anyone give me a hand with this code? public static void buildScreenshotFromURL(string url) { int width = 800; int height = 600; using (WebBrowser browser = new WebBrowser()) { browser.Width = width; browser.Height = height; browser.ScrollBarsEnabled = true; // This will be called when the page finishes loading browser.DocumentCompleted += new System.Windows.Forms.WebBrowserDocumentCompletedEventHandler(OnDocumentCompleted); //browser.DocumentCompleted += OnDocumentCompleted; browser.Navigate(url); // This prevents the application from exiting until // Application.Exit is called // Application.Run() does not work as it cannot be called twice, recommended form.showDialog() // but still issues Application.Run(); } } public static void OnDocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { // Define size of thumbnail neded int thumbSize = 50; // Now that the page is loaded, save it to a bitmap WebBrowser browser = (WebBrowser)sender; // Code edited from example below to make smaller bitmap and save as PNG using (Graphics graphics = browser.CreateGraphics()) { using (Bitmap bitmap = new Bitmap(browser.Width, browser.Height, graphics)) { Rectangle bounds = new Rectangle(0, 0, bitmap.Width, bitmap.Height); browser.DrawToBitmap(bitmap, bounds); Bitmap thumbBitmap = new Bitmap(bitmap.GetThumbnailImage(thumbSize, thumbSize, thumbCall, IntPtr.Zero)); thumbBitmap.Save("screenshot.png", ImageFormat.Png); handleImage(thumbBitmap); } }

    Read the article

  • Detect Client Computer name when an RDP session is open

    - by Ubiquitous Che
    Hey all, My manager has pointed out to me a few nifty things that one of our accounting applications can do because it can load different settings based on the machine name of the host and the machine name of the client when the package is opened in an RDP session. We want to provide similar functionality in one of my company's applications. I've found out on this site how to detect if I'm in an RDP session, but I'm having trouble finding information anywhere on how to detect the name of the client computer. Any pointers in the right direction would be great. I'm coding in C# for .NET 3.5 EDIT The sample code I cobbled together from the advice below - it should be enough for anyone who has a use for the WTSQuerySessionInformation to get a feel for what's going on. Note that this isn't necessarily the best way of doing it - just a starting point that I've found useful. When I run this locally, I get boring, expected answers. When I run it on our local office server in an RDP session, I see my own computer name in the WTSClientName property. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; namespace TerminalServicesTest { class Program { const int WTS_CURRENT_SESSION = -1; static readonly IntPtr WTS_CURRENT_SERVER_HANDLE = IntPtr.Zero; static void Main(string[] args) { StringBuilder sb = new StringBuilder(); uint byteCount; foreach (WTS_INFO_CLASS item in Enum.GetValues(typeof(WTS_INFO_CLASS))) { Program.WTSQuerySessionInformation( WTS_CURRENT_SERVER_HANDLE, WTS_CURRENT_SESSION, item, out sb, out byteCount); Console.WriteLine("{0}({1}): {2}", item.ToString(), byteCount, sb); } Console.WriteLine(); Console.WriteLine("Press any key to exit..."); Console.ReadKey(); } [DllImport("Wtsapi32.dll")] public static extern bool WTSQuerySessionInformation( IntPtr hServer, int sessionId, WTS_INFO_CLASS wtsInfoClass, out StringBuilder ppBuffer, out uint pBytesReturned); } enum WTS_INFO_CLASS { WTSInitialProgram = 0, WTSApplicationName = 1, WTSWorkingDirectory = 2, WTSOEMId = 3, WTSSessionId = 4, WTSUserName = 5, WTSWinStationName = 6, WTSDomainName = 7, WTSConnectState = 8, WTSClientBuildNumber = 9, WTSClientName = 10, WTSClientDirectory = 11, WTSClientProductId = 12, WTSClientHardwareId = 13, WTSClientAddress = 14, WTSClientDisplay = 15, WTSClientProtocolType = 16, WTSIdleTime = 17, WTSLogonTime = 18, WTSIncomingBytes = 19, WTSOutgoingBytes = 20, WTSIncomingFrames = 21, WTSOutgoingFrames = 22, WTSClientInfo = 23, WTSSessionInfo = 24, WTSSessionInfoEx = 25, WTSConfigInfo = 26, WTSValidationInfo = 27, WTSSessionAddressV4 = 28, WTSIsRemoteSession = 29 } }

    Read the article

  • bug/error in basis set path algorithm i can't figure out

    - by Roy McAvoy
    The following looks through a 2d array to find basis set paths. It is supposed to print out the individual paths but not repeat any and end when all paths are found. It however doesn't stop at the last path and has a bug in it somewhere in which the following happens: It goes halfway through the path and then goes to zero and ends the path for some reason. For example the table is filled with the following: all 0s, except for [1][2], [1][3], [2][4], [2][5], [3][5], [4][6], [5][6], [6][0] which all have a 1 in them. The desired paths are P1: 1 2 4 6 0 P2: 1 3 5 6 0 P3: 1 2 5 6 0. The output I get when i run the program is 12460 13560 1250 124 Any and all help on this is much appreciated, this is just the function that scans through the array looking for paths, I can add the entire program if that would be helpful. Thanks.. void find_path(int map[][MAX], int x){ int path =0; int m=1; int blah=0; bool path_found = false; do { for(int n=0;n<(x+1);n++){ if(map[m][n]==-1){ blah=(n+1); if(blah<(x+1)){ for(blah;blah<(x+1);blah++){ if(map[m][blah]==1){ map[m][blah]=-1; path=m; path_found = true; cout<<path; m=blah; n=0; } } } else{ path=m; path_found=false; cout<<path; m=n; if(m==0){ path=0; cout<<path<<endl; m=1; path_found=false; } } } else if(map[m][n]==1){ map[m][n]=-1; path=m; path_found = true; cout<<path; m=n; if(m==0){ path=0; cout<<path<<endl; m=1; path_found=false; } } } } while(m<(x+1) && path_found); }

    Read the article

  • Corner Cases, Unexpected and Unusual Matlab

    - by Mikhail
    Over the years, reading others code, I encountered and collected some examples of Matlab syntax which can be at first unusual and counterintuitive. Please, feel free to comment or complement this list. I verified it r2006a. set([], 'Background:Color','red') Matlab is very forgiving sometimes. In this case, setting properties to an array of objects works also with nonsense properties, at least when the array is empty. myArray([1,round(end/2)]) This use of end keyword may seem unclean but is sometimes very handy instead of using length(myArray). any([]) ~= all([]) Surprisigly any([]) returns false and all([]) returns true. And I always thought that all is stronger then any. EDIT: with not empty argument all() returns true for a subset of values for which any() returns true (e.g. truth table). This means that any() false implies all() false. This simple rule is being violated by Matlab with [] as argument. Loren also blogged about it. Select(Range(ExcelComObj)) Procedural style COM object method dispatch. Do not wonder that exist('Select') returns zero! [myString, myCell] Matlab makes in this case an implicit cast of string variable myString to cell type {myString}. It works, also if I would not expect it to do so. [double(1.8), uint8(123)] => 2 123 Another cast example. Everybody would probably expect uint8 value being cast to double but Mathworks have another opinion. a = 5; b = a(); It looks silly but you can call a variable with round brackets. Actually it makes sense because this way you can execute a function given its handle. a = {'aa', 'bb' 'cc', 'dd'}; Surprsisingly this code neither returns a vector nor rises an error but defins matrix, using just code layout. It is probably a relict from ancient times. set(hobj, {'BackgroundColor','ForegroundColor'},{'red','blue'}) This code does what you probably expect it to do. That function set accepts a struct as its second argument is a known fact and makes sense, and this sintax is just a cell2struct away. Equvalence rules are sometimes unexpected at first. For example 'A'==65 returns true (although for C-experts it is self-evident). About which further unexpected/unusual Matlab features are you aware?

    Read the article

  • Hosting a WCF Service Lib through a Windows service get a System.InvalidOperationException: attempti

    - by JohnL
    I have a WCF Service Library containing five service contracts. The library is hosted through a Windows Service. Most if not all my configuration for the WCF Library is declaritive. The only thing I am doing in code for configuration is to pass the type of the class implementing the service contracts into ServiceHost. I then call Open on each of the services during the Windows Service OnStart event. Here is the error message I get: Service cannot be started. System.InvalidOperationException: Service '[Fubu.Conversion.Service1' has zero application (non-infrastructure) endpoints. This might be because no configuration file was found for your application, or because no service element matching the service name could be found in the configuration file, or because no endpoints were defined in the service element. at System.ServiceModel.Description.DispatcherBuilder.EnsureThereAreNonMexEndpoints(ServiceDescription description) at System.ServiceModel.Description.DispatcherBuilder.InitializeServiceHost(ServiceDescription description, ServiceHostBase serviceHost) at System.ServiceModel.ServiceHostBase.InitializeRuntime() at System.ServiceModel.ServiceHostBase.OnBeginOpen() at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open() at Fubu.RemotingHost.RemotingHost.StartServ... protected override void OnStart(string[] args) { // Uncomment to debug this properly //System.Diagnostics.Debugger.Break(); StartService1(); StartService2(); StartService3(); StartService4(); StartService5(); } Each of the above simply do the following: private void StartSecurityService() { host = new ServiceHost(typeof(Service1)); host.Open(); } Service Lib app.congfig summary <services> <service behaviorConfiguration="DefaultServiceBehavior" name="Fubu.Conversion.Service1"> <endpoint address="" binding="netTcpBinding" bindingConfiguration="TCPBindingConfig" name="Service1" bindingName="TCPEndPoint" contract="Fubu.Conversion.IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" name="mexSecurity" bindingName="TcpMetaData" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:8025/Fubu/Conversion/Service1/" /> </baseAddresses> </host> </service> ... Contract is set up as follows: namespace Fubu.Conversion.Service1 { [ServiceContract(Namespace = "net.tcp://localhost:8025/Fubu")] public interface IService1 { I have looked "high and low" for a solution without any luck. Is the answer obvious? The solution to this does not appear to be. Thanks

    Read the article

  • Create links programmatically inside an EmberJS view

    - by Michael Gallego
    I have a pretty complex view to render which involves some kind of recursion (the typical folder/file nested list). The fact that it contains heterogeneous objects (folders and files) make it even harder to write Handlebars templates. Therefore, the only solution I've found is to create a view, and manually fill the render buffer. I came with the following solution: App.LibraryContentList = Ember.View.extend({ tagName: 'ol', classNames: ['project-list', 'dd-list'], nameChanged: function() { this.rerender(); }.observes('[email protected]'), render: function(buffer) { // We only start with depth of zero var content = this.get('content').filterProperty('depth', 0); content.forEach(function(item) { this.renderItem(buffer, item); }, this); }, renderItem: function(buffer, item) { switch (item.constructor.toString()) { case 'Photo.Folder': this.renderFolder(buffer, item); break; case 'Photo.File': this.renderFile(buffer, item); break; } }, renderFolder: function(buffer, folder) { buffer.push('<li class="folder dd-item">'); buffer.push('<span class="dd-handle">' + folder.get('name') + '</span>'); // Merge sub folders and files, and sort them by sort order var content = this.mergeAndSort(); if (content.get('length') > 0) { buffer.push('<ol>'); content.forEach(function(item) { this.renderItem(buffer, item); }, this); buffer.push('</ol>'); } buffer.push('</li>'); }, renderFile: function(buffer, album) { buffer.push('<li class="album dd-item">'); buffer.push('<span class="dd-handle">' + file.get('name') + '</span>'); buffer.push('</li>'); } }); Now, what I'd like is to be able to add links so that each folder and each file is clickable and redirect to another route. But how am I supposed to do that, as I don't have access to the linkTo helper? I've tried to play with the LinkView view, but without any success. Should I register handlers manually for each item? I've also thought about breaking that with a CollectionView instead, and splitting the content by depth so that I could render it using templates, but it seems more complicated. Any thoughts?

    Read the article

  • FASM vc MASM trasnlation problem in mov si, offset msg

    - by Ruben Trancoso
    hi folks, just did my first test with MASM and FASM with the same code (almos) and I falled in trouble. The only difference is that to produce just the 104 bytes I need to write to MBR in FASM I put org 7c00h and in MASM 0h. The problem is on the mov si, offset msg that in the first case transletes it to 44 7C (7c44h) and with masm translates to 44 00 (0044h)! but just when I change org 7c00h to org 0h in MASM. Otherwise it will produce the entire segment from 0 to 7dff. how do I solve it? or in short, how to make MASM produce a binary that begins at 7c00h as it first byte and subsequent jumps remain relative to 7c00h? .model TINY .code org 7c00h ; Boot entry point. Address 07c0:0000 on the computer memory xor ax, ax ; Zero out ax mov ds, ax ; Set data segment to base of RAM jmp start ; Jump to the first byte after DOS boot record data ; ---------------------------------------------------------------------- ; DOS boot record data ; ---------------------------------------------------------------------- brINT13Flag db 90h ; 0002h - 0EH for INT13 AH=42 READ brOEM db 'MSDOS5.0' ; 0003h - OEM name & DOS version (8 chars) brBPS dw 512 ; 000Bh - Bytes/sector brSPC db 1 ; 000Dh - Sectors/cluster brResCount dw 1 ; 000Eh - Reserved (boot) sectors brFATs db 2 ; 0010h - FAT copies brRootEntries dw 0E0h ; 0011h - Root directory entries brSectorCount dw 2880 ; 0013h - Sectors in volume, < 32MB brMedia db 240 ; 0015h - Media descriptor brSPF dw 9 ; 0016h - Sectors per FAT brSPH dw 18 ; 0018h - Sectors per track brHPC dw 2 ; 001Ah - Number of Heads brHidden dd 0 ; 001Ch - Hidden sectors brSectors dd 0 ; 0020h - Total number of sectors db 0 ; 0024h - Physical drive no. db 0 ; 0025h - Reserved (FAT32) db 29h ; 0026h - Extended boot record sig brSerialNum dd 404418EAh ; 0027h - Volume serial number (random) brLabel db 'OSAdventure' ; 002Bh - Volume label (11 chars) brFSID db 'FAT12 ' ; 0036h - File System ID (8 chars) ;------------------------------------------------------------------------ ; Boot code ; ---------------------------------------------------------------------- start: mov si, offset msg call showmsg hang: jmp hang msg db 'Loading...',0 showmsg: lodsb cmp al, 0 jz showmsgd push si mov bx, 0007 mov ah, 0eh int 10h pop si jmp showmsg showmsgd: retn ; ---------------------------------------------------------------------- ; Boot record signature ; ---------------------------------------------------------------------- dw 0AA55h ; Boot record signature END

    Read the article

  • C# Spell checker Problem

    - by reggie
    I've incorporated spell check into my win forms C# project. This is my code. public void CheckSpelling() { try { // declare local variables to track error count // and information int SpellingErrors = 0; string ErrorCountMessage = string.Empty; // create an instance of a word application Microsoft.Office.Interop.Word.Application WordApp = new Microsoft.Office.Interop.Word.Application(); // hide the MS Word document during the spellcheck //WordApp.WindowState = WdWindowState.wdWindowStateMinimize; // check for zero length content in text area if (this.Text.Length > 0) { WordApp.Visible = false; // create an instance of a word document _Document WordDoc = WordApp.Documents.Add(ref emptyItem, ref emptyItem, ref emptyItem, ref oFalse); // load the content written into the word doc WordDoc.Words.First.InsertBefore(this.Text); // collect errors form new temporary document set to contain // the content of this control Microsoft.Office.Interop.Word.ProofreadingErrors docErrors = WordDoc.SpellingErrors; SpellingErrors = docErrors.Count; // execute spell check; assumes no custom dictionaries WordDoc.CheckSpelling(ref oNothing, ref oIgnoreUpperCase, ref oAlwaysSuggest, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing, ref oNothing); // format a string to contain a report of the errors detected ErrorCountMessage = "Spell check complete; errors detected: " + SpellingErrors; // return corrected text to control's text area object first = 0; object last = WordDoc.Characters.Count - 1; this.Text = WordDoc.Range(ref first, ref last).Text; } else { // if nothing was typed into the control, abort and inform user ErrorCountMessage = "Unable to spell check an empty text box."; } WordApp.Quit(ref oFalse, ref emptyItem, ref emptyItem); System.Runtime.InteropServices.Marshal.ReleaseComObject(WordApp); // return report on errors corrected // - could either display from the control or change this to // - return a string which the caller could use as desired. // MessageBox.Show(ErrorCountMessage, "Finished Spelling Check"); } catch (Exception e) { MessageBox.Show(e.ToString()); } } The spell checker works well, the only problem is when I try to move the spell checker the main form blurs up for some reason. Also when I close the spell checker the main form is back to normal. It seems like it is opening up Microsoft word then hiding the window, only allowing the spell checker to be seen. Please help.

    Read the article

  • C++ question on prime numbers.

    - by user278330
    Hello. I am trying to make a program that determines if the number is prime or composite. I have gotten thus far. Could you give me any ideas so that it will work? All primes will , however, because composites have values that are both r0 and r==0, they will always be classified as prime. How can I fix this? int main() { int pNumber, limit, x, r; limit = 0; x = 2; cout << "Please enter any positive integer: " ; cin >> pNumber; if (pNumber < 0) { cout << "Invalid. Negative Number. " << endl; return 0; } else if (pNumber == 0) { cout << "Invalid. Zero has an infinite number of divisors, and therefore neither composite nor prime." << endl; return 0; } else if (pNumber == 1) { cout << "Valid. However, one is neither prime nor composite" << endl; return 0; } else { while (limit < pNumber) { r = pNumber % x; x++; limit++; } if (r == 0) cout << "Your number is composite" << endl; else cout << "Your number is prime" << endl; } return 0; }

    Read the article

  • C++ question on prime numbers.

    - by user278330
    Hello. I am trying to make a program that determines if the number is prime or composite. I have gotten thus far. Could you give me any ideas so that it will work? All primes will , however, because composites have values that are both r0 and r==0, they will always be classified as prime. How can I fix this? int main() { int pNumber, limit, x, r; limit = 0; x = 2; cout << "Please enter any positive integer: " ; cin >> pNumber; if (pNumber < 0) { cout << "Invalid. Negative Number. " << endl; return 0; } else if (pNumber == 0) { cout << "Invalid. Zero has an infinite number of divisors, and therefore neither composite nor prime." << endl; return 0; } else if (pNumber == 1) { cout << "Valid. However, one is neither prime nor composite" << endl; return 0; } else { while (limit < pNumber) { r = pNumber % x; x++; limit++; } if (r == 0) cout << "Your number is composite" << endl; else cout << "Your number is prime" << endl; } return 0; }

    Read the article

  • Uncenter MkMapView

    - by Makinitez21
    I am trying to "uncenter" the map view and remove all annotations. the reason for this is that the mapView will be used by different view controllers to display different annotations and locations. What's happening now is that i am using the "remove annotations" method and i removes them, but the map stays centered on the spot and thus when the new annotations come in, it does not move. Is there a way to reset the region and if so, what value do i reset it to. I tried nil, zero and some calculated value but "core animation" says they are all invalid. how do i get that to zoom out and back in on my new annotations? here is some code -(void)recenterMap { NSArray *coordinates = [_mapView valueForKeyPath:@"annotations.coordinate"]; CLLocationCoordinate2D maxCoord = {-90.0f, -180.0f}; CLLocationCoordinate2D minCoord = {90.0f, 180.0f}; //NSLog(@"%@", [coordinates description]); for (NSValue *value in coordinates) { CLLocationCoordinate2D coord = {0.0f, 0.0f}; [value getValue: &coord]; if(coord.longitude > maxCoord.longitude) { maxCoord.longitude = coord.longitude; } if(coord.latitude > maxCoord.latitude){ maxCoord.latitude = coord.latitude; } if(coord.longitude < minCoord.longitude){ minCoord.longitude = coord.longitude; } if(coord.latitude < minCoord.latitude){ minCoord.latitude = coord.latitude; } } MKCoordinateRegion region = {{0.0f, 0.0f}, {0.0f, 0.0f}}; region.center.longitude = (minCoord.longitude + maxCoord.longitude) / 2.0; region.center.latitude = (minCoord.latitude + maxCoord.latitude) / 2.0; region.span.longitudeDelta = maxCoord.longitude - minCoord.longitude; region.span.latitudeDelta = maxCoord.latitude - minCoord.latitude; [_mapView setRegion: region animated: YES]; } Thats the recenter methos i'm using - (MKAnnotationView *)mapView: (MKMapView *)mapView viewForAnnotation: (id <MKAnnotation>)annotation{ MKAnnotationView *view = nil; if(annotation != mapView.userLocation){ Annotation *schoolAnn = (Annotation*)annotation; view = [self.mapView dequeueReusableAnnotationViewWithIdentifier:@"schoolLoc"]; if(nil == view){ view = [[[MKPinAnnotationView alloc] initWithAnnotation:schoolAnn reuseIdentifier:@"schoolLoc"]autorelease]; } [(MKPinAnnotationView *)view setAnimatesDrop:YES]; [view setCanShowCallout:YES]; } else { [self recenterMap]; } return view; } This "else" piece waits until the blue marble drops in then recenters the map. The problem i have with that part is that when i go back to the previous View Controller i remove all annotations, so when i come back in the User location (for some reason) does not pop back in. How do i get this to pop back in? thanks in advance guys

    Read the article

  • Using JUnit as an acceptance test framework

    - by Chris Knight
    OK, so I work for a company who has openly adopted agile practices for development in recent years. Our unit tests and code quality are improving. One area we still are working on is to find what works best for us in the automated acceptance test arena. We want to take our well formed user stories and use these to drive the code in a test driven manner. This will also give us acceptance level tests for each user story which we can then automate. To date, we've tried Fit, Fitnesse and Selenium. Each have their advantages, but we've also had real issues with them as well. With Fit and Fitnesse, we can't help but feel they overcomplicate things and we've had many technical issues using them. The business haven't fully bought in these tools and aren't particularly keen on maintaining the scripts all the time (and aren't big fans of the table style). Selenium is really good, but slow and relies on real time data and resources. One approach we are now considering is the use of the JUnit framework to provide similiar functionality. Rather than testing just a small unit of work using JUnit, why not use it to write a test (using the JUnit framework) to cover an acceptance level swath of the application? I.e. take a new story ("As a user I would like to see basic details of my policy...") and write a test in JUnit which starts executing application code at the point of entry for the policy details link but covers all code and logic down to the stubbed data access layer and back to the point of forwarding to the next page in the application, asserting on what data the user should see on that page. This seems to me to have the following advantages: Simplicity (no additional frameworks required) Zero effort to integrate with our Continuous Integration build server (since it already handles our JUnit tests) Full skillset already present in the team (its just a JUnit test after all) And the downsides being: Less customer involvement (though they are heavily involved in writing the user stories in the first place from which the acceptance tests will be written) Perhaps more difficult to understand (or make understood) the user story and acceptance criteria in a JUnit class verses a freetext specification ala Fit or Fitnesse So, my question is really, have you ever tried this method? Ever considered it? What are your thoughts? What do you like and dislike about this approach? Finally, please only mention alternative frameworks if you can say why you like or dislike them more than this approach.

    Read the article

  • Unit finalization order for application, compiled with run-time packages?

    - by Alexander
    I need to execute my code after finalization of SysUtils unit. I've placed my code in separate unit and included it first in uses clause of dpr-file, like this: project Project1; uses MyUnit, // <- my separate unit SysUtils, Classes, SomeOtherUnits; procedure Test; begin // end; begin SetProc(Test); end. MyUnit looks like this: unit MyUnit; interface procedure SetProc(AProc: TProcedure); implementation var Test: TProcedure; procedure SetProc(AProc: TProcedure); begin Test := AProc; end; initialization finalization Test; end. Note that MyUnit doesn't have any uses. This is usual Windows exe, no console, without forms and compiled with default run-time packages. MyUnit is not part of any package (but I've tried to use it from package too). I expect that finalization section of MyUnit will be executed after finalization section of SysUtils. This is what Delphi's help tells me. However, this is not always the case. I have 2 test apps, which differs a bit by code in Test routine/dpr-file and units, listed in uses. MyUnit, however, is listed first in all cases. One application is run as expected: Halt0 - FinalizeUnits - ...other units... - SysUtils's finalization - MyUnit's finalization - ...other units... But the second is not. MyUnit's finalization is invoked before SysUtils's finalization. The actual call chain looks like this: Halt0 - FinalizeUnits - ...other units... - SysUtils's finalization (skipped) - MyUnit's finalization - ...other units... - SysUtils's finalization (executed) Both projects have very similar settings. I tried a lot to remove/minimize their differences, but I still do not see a reason for this behaviour. I've tried to debug this and found out that: it seems that every unit have some kind of reference counting. And it seems that InitTable contains multiply references to the same unit. When SysUtils's finalization section is called first time - it change reference counter and do nothing. Then MyUnit's finalization is executed. And then SysUtils is called again, but this time ref-count reaches zero and finalization section is executed: Finalization: // SysUtils' finalization 5003B3F0 55 push ebp // here and below is some form of stub 5003B3F1 8BEC mov ebp,esp 5003B3F3 33C0 xor eax,eax 5003B3F5 55 push ebp 5003B3F6 688EB50350 push $5003b58e 5003B3FB 64FF30 push dword ptr fs:[eax] 5003B3FE 648920 mov fs:[eax],esp 5003B401 FF05DCAD1150 inc dword ptr [$5011addc] // here: some sort of reference counter 5003B407 0F8573010000 jnz $5003b580 // <- this jump skips execution of finalization for first call 5003B40D B8CC4D0350 mov eax,$50034dcc // here and below is actual SysUtils' finalization section ... Can anyone can shred light on this issue? Am I missing something?

    Read the article

  • How to Add an Attachment to a User Story using Rally REST .NET

    - by user1373451
    We're in the process of porting our .NET Rally code from SOAP to the REST .NET API. One thing I'm looking to replicate is the ability to upload attachments. I'm following a very similar procedure as to the one outlined in this posting: Rally SOAP API - How do I add an attachment to a Hierarchical Requirement Whereby the image is read into a System.Drawing.Image. We use the ImageToBase64 function to convert the image to a byte array which then gets assigned to the AttachmentContent, which is created first. Then, the Attachment gets created, and wired up to both AttachmentContent, and the HierarchicalRequirement. All of the creation events work great. A new attachment called "Image.png" gets created on the Story. However, when I download the resulting attachment from Rally, Image.png has zero bytes! I've tried this with different images, JPEG's, PNG's, etc. all with the same results. An excerpt of the code showing the process is included below. Is there something obvious that I'm missing? Thanks in advance. // .... Read content into a System.Drawing.Image.... // Convert Image to Base64 format byte[] imageBase64Format = ImageToBase64(imageObject, System.Drawing.Imaging.ImageFormat.Png); var imageLength = imageBase64Format.Length; // AttachmentContent DynamicJsonObject attachmentContent = new DynamicJsonObject(); attachmentContent["Content"] = imageBase64Format; CreateResult cr = restApi.Create("AttachmentContent", myAttachmentContent); String contentRef = cr.Reference; Console.WriteLine("Created: " + contentRef); // Tee up attachment DynamicJsonObject newAttachment = new DynamicJsonObject(); newAttachment["Artifact"] = story; newAttachment["Content"] = attachmentContent; newAttachment["Name"] = "Image.png"; newAttachment["ContentType"] = "image/png"; newAttachment["Size"] = imageLength; newAttachment["User"] = user; cr = restApi.Create("Attachment", newAttachment); String attachRef = attachRef.Reference; Console.WriteLine("Created: " + attachRef); } public static byte[] ImageToBase64(Image image, System.Drawing.Imaging.ImageFormat format) { using (MemoryStream ms = new MemoryStream()) { image.Save(ms, format); // Convert Image to byte[] byte[] imageBytes = ms.ToArray(); return imageBytes; } }

    Read the article

  • Calling an Excel Add-In method from C# application or vice versa

    - by Jude
    I have an Excel VBA add-in with a public method in a bas file. This method currently creates a VB6 COM object, which exists in a running VB6 exe/vbp. The VB6 app loads in data and then the Excel add-in method can call methods on the VB6 COM object to load the data into an existing Excel xls. This is all currently working. We have since converted our VB6 app to C#. My question is: What is the best/easiest way to mimic this behavior with the C#/.NET app? I'm thinking I may not be able to pull the data from the .NET app into Excel from the add-in method since the .Net app needs to be running with data loaded (so no using a stand-alone C# class library). Maybe we can, instead, push the data from .NET to Excel by accessing the VBA add-in method from the C# code? The following is the existing VBA method accessing the VB6 app: Public Sub UpdateInDataFromApp() Dim wkbInData As Workbook Dim oFPW As Object Dim nMaxCols As Integer Dim nMaxRows As Integer Dim j As Integer Dim sName As String Dim nCol As Integer Dim nRow As Integer Dim sheetCnt As Integer Dim nDepth As Integer Dim sPath As String Dim vData As Variant Dim SheetRange As Range Set wkbInData = wkbOpen("InData.xls") sPath = g_sPathXLSfiles & "\" 'Note: the following will bring up fpw app if not already running Set oFPW = CreateObject("FPW.CProfilesData") If oFPW Is Nothing Then MsgBox "Unable to reference " & sApp Else . . . sheetCnt = wkbInData.Sheets.Count 'get number of sheets in indata workbook For j = 2 To sheetCnt 'set counter to loop over all sheets except the first one which is not input data fields With wkbInData.Worksheets(j) Set SheetRange = .UsedRange End With With SheetRange nMaxRows = .Rows.Count 'get range of sheet(j) nMaxCols = .Columns.Count 'get range of sheet(j) Range(.Cells(2, 2), .Cells(nMaxRows, nMaxCols)).ClearContents 'Clears data from data range (51 Columns) Range(.Cells(2, 2), .Cells(nMaxRows, nMaxCols)).ClearComments End With With oFPW 'vb6 object For nRow = 2 To nMaxRows ' loop through rows sName = SheetRange.Cells(nRow, 1) 'Field name vData = .vntGetSymbol(sName, 0) 'Check if vb6 app identifies the name nDepth = .GetInputTableDepth(sName) 'Get number of data items for this field name from vb6 app nMaxCols = nDepth + 2 'nDepth=0, is single data item For nCol = 2 To nMaxCols 'loop over deep screen fields nDepth = nCol - 2 'current depth vData = .vntGetSymbol(sName, nDepth) 'Get Data from vb6 app If LenB(vData) > 0 And IsNumeric(vData) Then 'Check if data returned SheetRange.Cells(nRow, nCol) = vData 'Poke the data in Else SheetRange.Cells(nRow, nCol) = vData 'Poke a zero in End If Next 'nCol Next 'nRow End With Set SheetRange = Nothing Next 'j End If Set wkbInData = Nothing Set oFPW = Nothing Exit Sub . . . End Sub Any help would be appreciated.

    Read the article

  • An IOCP documentation interpretation question - buffer ownership ambiguity

    - by Poni
    Since I'm not a native English speaker I might be missing something so maybe someone here knows better than me. Taken from WSASend's doumentation at MSDN: lpBuffers [in] A pointer to an array of WSABUF structures. Each WSABUF structure contains a pointer to a buffer and the length, in bytes, of the buffer. For a Winsock application, once the WSASend function is called, the system owns these buffers and the application may not access them. This array must remain valid for the duration of the send operation. Ok, can you see the bold text? That's the unclear spot! I can think of two translations for this line (might be something else, you name it): Translation 1 - "buffers" refers to the OVERLAPPED structure that I pass this function when calling it. I may reuse the object again only when getting a completion notification about it. Translation 2 - "buffers" refer to the actual buffers, those with the data I'm sending. If the WSABUF object points to one buffer, then I cannot touch this buffer until the operation is complete. Can anyone tell what's the right interpretation to that line? And..... If the answer is the second one - how would you resolve it? Because to me it implies that for each and every data/buffer I'm sending I must retain a copy of it at the sender side - thus having MANY "pending" buffers (in different sizes) on an high traffic application, which really going to hurt "scalability". Statement 1: In addition to the above paragraph (the "And...."), I thought that IOCP copies the data to-be-sent to it's own buffer and sends from there, unless you set SO_SNDBUF to zero. Statement 2: I use stack-allocated buffers (you know, something like char cBuff[1024]; at the function body - if the translation to the main question is the second option (i.e buffers must stay as they are until the send is complete), then... that really screws things up big-time! Can you think of a way to resolve it? (I know, I asked it in other words above).

    Read the article

  • Would someone mind giving suggestions for this new assembly language?

    - by Noctis Skytower
    Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo save Store load Retrieve L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

    Read the article

  • Getting my string value from my form into my class( not another form)

    - by jovany
    Hello all, I have a question regarding the some data which is being transfered from one form to my class. It's not going quite the way i'd like to , so I figured maybe there is someone who could help me. This is my code in my class Public Class DrawableTextBox Inherits Drawable Dim i_testString As Integer Private s_InsertLabel As String Private drawFont As Font Public Sub New(ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0, Optional ByVal new_x1 As Integer = 0, Optional ByVal new_y1 As Integer = 0, Optional ByVal new_x2 As Integer = 1, Optional ByVal new_y2 As Integer = 1) MyBase.New(fore_color, fill_color, line_width) X1 = new_x1 Y1 = new_y1 X2 = new_x2 Y2 = new_y2 Trace.WriteLine(s_InsertLabel) End Sub Friend WriteOnly Property _textBox() As String Set(ByVal Value As String) s_InsertLabel = Value Trace.WriteLine(s_InsertLabel) End Set End Property ' Draw the object on this Graphics surface. Public Overrides Sub Draw(ByVal gr As System.Drawing.Graphics) ' Make a Rectangle representing this rectangle. Dim rect As Rectangle = GetBounds() ' Fill the rectangle as usual. Dim fill_brush As New SolidBrush(FillColor) gr.FillRectangle(fill_brush, rect) fill_brush.Dispose() ' See if we're selected. If IsSelected Then ' Draw the rectangle highlighted. Dim highlight_pen As New Pen(Color.Yellow, LineWidth) gr.DrawRectangle(highlight_pen, rect) highlight_pen.Dispose() ' Draw grab handles. Trace.WriteLine("drawing the lines for my textbox") DrawGrabHandle(gr, X1, Y1) DrawGrabHandle(gr, X1, Y2) DrawGrabHandle(gr, X2, Y2) DrawGrabHandle(gr, X2, Y1) Else 'TextBox() Dim fg_pen As New Pen(Color.Red, LineWidth) 'Dim fontSize As Single = 0.1 + ((Y2 - Y1) / 2) Dim fontSize As Single = 20 Try Dim drawFont As New Font("Arial", fontSize, FontStyle.Bold) Trace.WriteLine(s_InsertLabel) gr.DrawString(s_InsertLabel, drawFont, Brushes.Brown, X1, Y1) Catch ex As ArgumentException End Try gr.DrawRectangle(Pens.Azure, rect) ' gr.DrawRectangle(fg_pen, rect) fg_pen.Dispose() End If End Sub Public Function GetValueString(ByVal ValueType As String) Return ValueType End Function ' Return the object's bounding rectangle. Public Overrides Function GetBounds() As System.Drawing.Rectangle Return New Rectangle( _ Min(X1, X2), _ Min(Y1, Y2), _ Abs(100), _ Abs(30)) Trace.WriteLine("don't forget to make variables in GetBounds DrawableTextbox") End Function ' Return True if this point is on the object. Public Overrides Function IsAt(ByVal x As Integer, ByVal y As Integer) As Boolean Return (x >= Min(X1, X2)) AndAlso _ (x <= Max(X1, X2)) AndAlso _ (y >= Min(Y1, Y2)) AndAlso _ (y <= Max(Y1, Y2)) End Function ' Move the second point. Public Overrides Sub NewPoint(ByVal x As Integer, ByVal y As Integer) X2 = x Y2 = y End Sub ' Return True if the object is empty (e.g. a zero-length line). Public Overrides Function IsEmpty() As Boolean Return (X1 = X2) AndAlso (Y1 = Y2) End Function End Class I've got a form with a textbox( form1) in which the text is being inserted and passed through a buttonclick (al via properties). As you can see I've placed several traces and in the property of the class my trace works fine , however if I look in my Draw function it is already gone. And I get a blank trace. Does anyone know what's happening here. thanks in advance. (forgive me I'm new )

    Read the article

  • Getting a screenshot of a page using .NET - Need help with code

    - by Ender
    I'm writing a specialized crawler and parser for internal use and I require the ability to take a screenshot of a web page in order to check what colours are being used throughout. The program will take in around ten web addresses and will save them as a bitmap image, from there I plan to use LockBits in order to create a list of the five most used colours within the image. To my knowledge it's the easiest way to get the colours used within a web page but if there is an easier way to do it please chime in with your suggestions. Anyway, I was going to use this program until I saw the price tag. I'm also fairly new to C#, having only used it for a few months. Can anyone provide me with a solution to my problem of taking a screenshot of a web page in order to extract the colour scheme? EDIT: Sorry for not getting back to this sooner, but I've been busy with some other things. Anyway, the code seems to work well, but the problem I am having right now is that I am running it within a form, and naturally with Application.Run() being called I cannot run two instances of the same form at once. It recommended Form.showDialog() but that broke everything. Can anyone give me a hand with this code? public static void buildScreenshotFromURL(string url) { int width = 800; int height = 600; using (WebBrowser browser = new WebBrowser()) { browser.Width = width; browser.Height = height; browser.ScrollBarsEnabled = true; // This will be called when the page finishes loading browser.DocumentCompleted += new System.Windows.Forms.WebBrowserDocumentCompletedEventHandler(OnDocumentCompleted); //browser.DocumentCompleted += OnDocumentCompleted; browser.Navigate(url); // This prevents the application from exiting until // Application.Exit is called // Application.Run() does not work as it cannot be called twice, recommended form.showDialog() // but still issues Application.Run(); } } public static void OnDocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { // Define size of thumbnail neded int thumbSize = 50; // Now that the page is loaded, save it to a bitmap WebBrowser browser = (WebBrowser)sender; // Code edited from example below to make smaller bitmap and save as PNG using (Graphics graphics = browser.CreateGraphics()) { using (Bitmap bitmap = new Bitmap(browser.Width, browser.Height, graphics)) { Rectangle bounds = new Rectangle(0, 0, bitmap.Width, bitmap.Height); browser.DrawToBitmap(bitmap, bounds); Bitmap thumbBitmap = new Bitmap(bitmap.GetThumbnailImage(thumbSize, thumbSize, thumbCall, IntPtr.Zero)); thumbBitmap.Save("screenshot.png", ImageFormat.Png); handleImage(thumbBitmap); } }

    Read the article

  • initWithCoder works, but init seems to be overwriting my objects properties?

    - by Zigrivers
    Hi guys, I've been trying to teach myself how to use the Archiving/Unarchiving methods of NSCoder, but I'm stumped. I have a Singleton class that I have defined with 8 NSInteger properties. I am trying to save this object to disk and then load from disk as needed. I've got the save part down and I have the load part down as well (according to NSLogs), but after my "initWithCoder:" method loads the object's properties appropriately, the "init" method runs and resets my object's properties back to zero. I'm probably missing something basic here, but would appreciate any help! My class methods for the Singleton class: + (Actor *)shareActorState { static Actor *actorState; @synchronized(self) { if (!actorState) { actorState = [[Actor alloc] init]; } } return actorState; } -(id)init { if (self = [super init]) { NSLog(@"New Init for Actor started...\nStrength: %d", self.strength); } return self; } -(id)initWithCoder:(NSCoder *)coder { if (self = [super init]) { strength = [coder decodeIntegerForKey:@"strength"]; dexterity = [coder decodeIntegerForKey:@"dexterity"]; stamina = [coder decodeIntegerForKey:@"stamina"]; will = [coder decodeIntegerForKey:@"will"]; intelligence = [coder decodeIntegerForKey:@"intelligence"]; agility = [coder decodeIntegerForKey:@"agility"]; aura = [coder decodeIntegerForKey:@"aura"]; eyesight = [coder decodeIntegerForKey:@"eyesight"]; NSLog(@"InitWithCoder executed....\nStrength: %d\nDexterity: %d", self.strength, self.dexterity); [self retain]; } return self; } -(void) encodeWithCoder:(NSCoder *)encoder { [encoder encodeInteger:strength forKey:@"strength"]; [encoder encodeInteger:dexterity forKey:@"dexterity"]; [encoder encodeInteger:stamina forKey:@"stamina"]; [encoder encodeInteger:will forKey:@"will"]; [encoder encodeInteger:intelligence forKey:@"intelligence"]; [encoder encodeInteger:agility forKey:@"agility"]; [encoder encodeInteger:aura forKey:@"aura"]; [encoder encodeInteger:eyesight forKey:@"eyesight"]; NSLog(@"encodeWithCoder executed...."); } -(void)dealloc { //My dealloc stuff goes here [super dealloc]; } I'm a noob when it comes to this stuff and have been trying to teach myself for the last month, so forgive anything obvious. Thanks for the help!

    Read the article

  • Qt - problem appending to QList of QList

    - by bullettime
    I'm trying to append items to a QList at runtime, but I'm running on a error message. Basically what I'm trying to do is to make a QList of QLists and add a few customClass objects to each of the inner lists. Here's my code: widget.h: class Widget : public QWidget { Q_OBJECT public: Widget(QWidget *parent = 0); ~Widget(); public slots: static QList<QList<customClass> > testlist(){ QList<QList<customClass> > mylist; for(int w=0 ; w<5 ; w++){ mylist.append(QList<customClass>()); } for(int z=0 ; z<mylist.size() ; z++){ for(int x=0 ; x<10 ; x++){ customClass co = customClass(); mylist.at(z).append(co); } } return mylist; } }; customclass.h: class customClass { public: customClass(){ this->varInt = 1; this->varQString = "hello world"; } int varInt; QString varQString; }; main.cpp: int main(int argc, char *argv[]) { QApplication a(argc, argv); Widget w; QList<QList<customClass> > list; list = w.testlist(); w.show(); return a.exec(); } But when I try to run the application, it gives off this error: error: passing `const QList<customClass>' as `this' argument of `void List<T>::append(const T&) [with T = customClass]' discards qualifiers I also tried inserting the objects using foreach: foreach(QList<customClass> list, mylist){ for(int x=0 ; x<10 ; x++){ list.append(customClass()); } } The error was gone, but the customClass objects weren't appended, I could verify that by using a debugging loop in main that showed the inner QLists sizes as zero. What am I doing wrong?

    Read the article

  • IF Statement has strange behavior

    - by BSchlinker
    I've developed a 'custom' cout, so that I can display text to console and also print it to a log file. This cout class is passed a different integer on initialization, with the integer representing the verbosity level of the message. If the current verbosity level is greater then or equal to the verbosity level of the message, the message should print. The problem is, I have messages printing even when the current verbosity level is too low. I went ahead and debugged it, expecting to find the problem. Instead, I found multiple scenarios where my if statements are not working as expected. The statement if(ilralevel_passed <= ilralevel_set) will sometimes proceed even if ilralevel_set is LESS then ilralevel_passed. You can see this behavior in the following picture (my apologizes for using Twitpic) http://twitpic.com/1xtx4g/full. Notice how ilralevel_set is equal to zero, and ilralevel_passed is equal to one. Yet, the if statement has returned true and is now moving forward to pass the line to cout. I've never seen this type of behavior before and I'm not exactly sure how to proceed debugging it. I'm not able to isolate the behavior either -- it only occurs in certain parts of my program. Any suggestions are appreciated as always. // Here is an example use of the function: // ilra_status << setfill('0') << setw(2) << dispatchtime.tm_sec << endl; // ilra_warning << "Dispatch time (seconds): " << mktime(&dispatchtime) << endl; // Here is the 'custom' cout function: #ifndef ILRA_H_ #define ILRA_H_ // System libraries #include <iostream> #include <ostream> #include <sstream> #include <iomanip> // Definitions #define ilra_talk ilra(__FUNCTION__,0) #define ilra_update ilra(__FUNCTION__,0) #define ilra_error ilra(__FUNCTION__,1) #define ilra_warning ilra(__FUNCTION__,2) #define ilra_status ilra(__FUNCTION__,3) // Statics static int ilralevel_set = 0; static int ilralevel_passed; // Classes class ilra { public: // constructor / destructor ilra(const std::string &funcName, int toset) { ilralevel_passed = toset; } ~ilra(){}; // enable / disable irla functions static void ilra_verbose_level(int toset){ ilralevel_set = toset; } // output template <class T> ilra &operator<<(const T &v) { if(ilralevel_passed <= ilralevel_set) std::cout << v; return *this; } ilra &operator<<(std::ostream&(*f)(std::ostream&)) { if(ilralevel_passed <= ilralevel_set) std::cout << *f; return *this; } }; // end of the class #endif /* ILRA_H_ */

    Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >