blender 3d - Page 114 - Developer IT

Again WPA Connection problem even after changed to latest version ..please help

- by Renjith G

I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

Read the article

Gratuitous CRLF in Subject: line - why is it there, and is it legal?

- by MadHatter

I'm running into a problem with a NAGIOS system sending emails to a popular email-to-SMS service. The email-to-SMS service takes emails with text in the Subject: line, and sends them on to the mobile number encoded in the To: field. So far so good. Sadly, sendmail (and postfix before it) seem to be inserting a gratuitous CRLF into the (necessarily long) Subject: line, and that's causing my SMS messages to be truncated at the CRLF if and only if the Subject: line contains one or more colons past the gratuitous CRLF. I am confident that the messages are being created correctly, but just to be sure, here's me creating a completely noddy test message to myself, with a long Subject: line: echo "foo" | mail -s "1234567 101234567 201234567 301234567 401234567 501234567 601234567 701234567 801234567 90123456789" [email protected] Note there's no extra colon in this Subject: line; all I'm doing here is showing that an extra CRLF is inserted on the wire. Here's the result of sudo ngrep -x port 25: 44 61 74 65 3a 20 46 72 69 2c 20 33 31 20 4d 61 Date: Fri, 31 Ma 79 20 32 30 31 33 20 31 30 3a 34 33 3a 35 35 20 y 2013 10:43:55 2b 30 31 30 30 0d 0a 54 6f 3a 20 72 65 61 70 65 +0100..To: reape 72 40 74 65 61 70 61 72 74 79 2e 6e 65 74 0d 0a [email protected].. 53 75 62 6a 65 63 74 3a 20 31 32 33 34 35 36 37 Subject: 1234567 20 31 30 31 32 33 34 35 36 37 20 32 30 31 32 33 101234567 20123 34 35 36 37 20 33 30 31 32 33 34 35 36 37 20 34 4567 301234567 4 30 31 32 33 34 35 36 37 20 35 30 31 32 33 34 35 01234567 5012345 36 37 0d 0a 20 36 30 31 32 33 34 35 36 37 20 37 67.. 601234567 7 30 31 32 33 34 35 36 37 20 38 30 31 32 33 34 35 01234567 8012345 36 37 20 39 30 31 32 33 34 35 36 37 38 39 0d 0a 67 90123456789.. 55 73 65 72 2d 41 67 65 6e 74 3a 20 48 65 69 72 User-Agent: Heir 6c 6f 6f 6d 20 6d 61 69 6c 78 20 31 32 2e 34 20 loom mailx 12.4 37 2f 32 39 2f 30 38 0d 0a 4d 49 4d 45 2d 56 65 7/29/08..MIME-Ve 72 73 69 6f 6e 3a 20 31 2e 30 0d 0a 43 6f 6e 74 rsion: 1.0..Cont 65 6e 74 2d 54 79 70 65 3a 20 74 65 78 74 2f 70 ent-Type: text/p 6c 61 69 6e 3b 20 63 68 61 72 73 65 74 3d 75 73 lain; charset=us About half way down (marked in bold+italic), between the 501234567 and the 601234567 in the original Subject: header, you can see a CRLF being inserted (0x0d 0x0a, on the left-hand side hex dump, .. on the right-hand side plain text). The receiving MTA seems happy to post-process this, and when I look at the on-disc stored mail at the receiving end, I see only a LF (0x0a) in the Subject: line, and the line is parsed correctly and in its entirety by, eg, alpine. Nevertheless, the CRLF is there on the wire, and between me and the (excellent) email-to-SMS support people, we've established that these are the cause of the problem. So my question is: is it lawful for an MTA to insert a gratuitous CRLF on the wire? If it is, and I can prove it, then it's the email-to-SMS house's problem, because they are being intolerant. If it isn't, or it is but I can't prove it, then it becomes my problem, so an answer with references would be most useful. Edit: I can now come clean that the email-to-SMS service in question is kapow. Once this problem was explained to them, they got it, worked with me to develop and test a fix, and have deployed the fix. My long subject lines with colons in now get relayed correctly into SMSes. I don't normally trumpet individual companies, especially not on SF, but I thought it worthy of note that kapow Did The Right Thing. (Disclaimer: I have no connection with kapow except as a paying customer who's happy about the way they dealt with his problem.)

Read the article

Only One GPU Detected in the Nvidia Quadra NVS 450

- by Kyle Brandt

I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

Read the article

Only One GPU Detected in the Nvidia Quadro NVS 450

- by Kyle Brandt

I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

Read the article

LinkedIn API returns 'Unauthorized' response (PHP OAuth)

- by Jim Greenleaf

I've been struggling with this one for a few days now. I've got a test app set up to connect to LinkedIn via OAuth. I want to be able to update a user's status, but at the moment I'm unable to interact with LinkedIn's API at all. I am able to successfully get a requestToken, then an accessToken, but when I issue a request to the API, I see an 'unauthorized' error that looks something like this: object(OAuthException)#2 (8) { ["message:protected"]=> string(73) "Invalid auth/bad request (got a 401, expected HTTP/1.1 20X or a redirect)" ["string:private"]=> string(0) "" ["code:protected"]=> int(401) ["file:protected"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line:protected"]=> int(48) ["trace:private"]=> array(1) { [0]=> array(6) { ["file"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line"]=> int(48) ["function"]=> string(5) "fetch" ["class"]=> string(5) "OAuth" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(35) "http://api.linkedin.com/v1/people/~" [1]=> string(3) "GET" } } } ["lastResponse"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["debugInfo"]=> array(5) { ["sbs"]=> string(329) "GET&http%3A%2F%2Fapi.linkedin.com%2Fv1%2Fpeople%2F~&oauth_consumer_key%3DBhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy%26oauth_nonce%3D7068001084c13f2ee6a2117.22312548%26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp%3D1276375790%26oauth_token%3D48032b2d-bc8c-4744-bb84-4eab53578c11%26oauth_version%3D1.0" ["headers_sent"]=> string(401) "GET /v1/people/~?GET&oauth_consumer_key=Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy&oauth_signature_method=HMAC-SHA1&oauth_nonce=7068001084c13f2ee6a2117.22312548&oauth_timestamp=1276375790&oauth_version=1.0&oauth_token=48032b2d-bc8c-4744-bb84-4eab53578c11&oauth_signature=xmc3lWhXJvLSUZh4dxMtrf55VVQ%3D HTTP/1.1 User-Agent: PECL-OAuth/1.0-dev Host: api.linkedin.com Accept: */*" ["headers_recv"]=> string(148) "HTTP/1.1 401 Unauthorized Server: Apache-Coyote/1.1 Date: Sat, 12 Jun 2010 20:49:50 GMT Content-Type: text/xml;charset=UTF-8 Content-Length: 358" ["body_recv"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["info"]=> string(216) "About to connect() to api.linkedin.com port 80 (#0) Trying 64.74.98.83... connected Connected to api.linkedin.com (64.74.98.83) port 80 (#0) Connection #0 to host api.linkedin.com left intact Closing connection #0 " } } My code looks like this (based on the FireEagle example from php.net): $req_url = 'https://api.linkedin.com/uas/oauth/requestToken'; $authurl = 'https://www.linkedin.com/uas/oauth/authenticate'; $acc_url = 'https://api.linkedin.com/uas/oauth/accessToken'; $api_url = 'http://api.linkedin.com/v1/people/~'; $callback = 'http://www.pmfe.org/dev/test/linkedin.php'; $conskey = 'Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy'; $conssec = '####################SECRET KEY#####################'; session_start(); try { $oauth = new OAuth($conskey,$conssec,OAUTH_SIG_METHOD_HMACSHA1,OAUTH_AUTH_TYPE_URI); $oauth->enableDebug(); if(!isset($_GET['oauth_token'])) { $request_token_info = $oauth->getRequestToken($req_url); $_SESSION['secret'] = $request_token_info['oauth_token_secret']; header('Location: '.$authurl.'?oauth_token='.$request_token_info['oauth_token']); exit; } else { $oauth->setToken($_GET['oauth_token'],$_SESSION['secret']); $access_token_info = $oauth->getAccessToken($acc_url); $_SESSION['token'] = $access_token_info['oauth_token']; $_SESSION['secret'] = $access_token_info['oauth_token_secret']; } $oauth->setToken($_SESSION['token'],$_SESSION['secret']); $oauth->fetch($api_url, OAUTH_HTTP_METHOD_GET); $response = $oauth->getLastResponse(); } catch(OAuthException $E) { var_dump($E); } I've successfully set up a connection to Twitter and one to Facebook using OAuth, but LinkedIn keeps eluding me. If anyone could offer some advice or point me in the right direction, I will be extremely appreciative!

Read the article

403 error after adding javascript to masterpage for sharepoint.

- by Jeremy

I am attempting to add highslide-with-html.js from http://highslide.com/ to my masterpage. I am receiving a 403 forbidden error when I use the provided masterpage. I have placed it in C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\1033. Test javascript files such as pirate.js which consists solely of alert("Arr!"); have loaded from the same directory. I have provided the code for the masterpage. When I do not reference the problem javascript file there is no 403 error. <%@ Master language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Register Tagprefix="SPSWC" Namespace="Microsoft.SharePoint.Portal.WebControls" Assembly="Microsoft.SharePoint.Portal, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingWebControls" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingNavigation" Namespace="Microsoft.SharePoint.Publishing.Navigation" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register TagPrefix="wssuc" TagName="Welcome" src="~/_controltemplates/Welcome.ascx" %> <%@ Register TagPrefix="wssuc" TagName="DesignModeConsole" src="~/_controltemplates/DesignModeConsole.ascx" %> <%@ Register TagPrefix="PublishingVariations" TagName="VariationsLabelMenu" src="~/_controltemplates/VariationsLabelMenu.ascx" %> <%@ Register Tagprefix="PublishingConsole" TagName="Console" src="~/_controltemplates/PublishingConsole.ascx" %> <%@ Register TagPrefix="PublishingSiteAction" TagName="SiteActionMenu" src="~/_controltemplates/PublishingActionMenu.ascx" %> <html dir="<%$Resources:wss, multipages_direction_dir_value %>" runat="server" __expr-val-dir="ltr"> <head runat="server"> <meta name="GENERATOR" content="Microsoft SharePoint"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <meta http-equiv="Expires" content="0"> <SharePoint:RobotsMetaTag runat="server" __designer:Preview="" __designer:Values="<P N='InDesign' T='False' /><P N='ID' T='ctl00' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <title id="onetidTitle"> <asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server"/> </title> <Sharepoint:CssLink runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/Band.css"/> <link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/controls.css"/> <link rel="stylesheet" type="text/css" href="/Style%20Library/zz1_blue.css"/> <link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css"/> " __designer:Values="<P N='InDesign' T='False' /><P N='ID' T='ctl01' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/>  <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css%>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/Band.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl02' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:CssRegistration name="<% $SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css %>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/controls.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl03' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/zz1_blue.css%>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/zz1_blue.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/zz1_blue.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl04' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:ScriptLink name="init.js" runat="server" __designer:Preview="<script src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script> " __designer:Values="<P N='Name' T='init.js' /><P N='InDesign' T='False' /><P N='ID' T='ctl05' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:ScriptLink Name="highslide-with-html.js" runat="server" __designer:Error="Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\layouts\1033\highslide-with-html.js' is denied."/>  <asp:ContentPlaceHolder id="PlaceHolderAdditionalPageHead" runat="server"/> </head> <body class="body" onload="javascript:_spBodyOnLoadWrapper();"> <WebPartPages:SPWebPartManager runat="server"/> <form runat="server" onsubmit="return _spFormOnSubmitWrapper();"> <table cellpadding="0" cellspacing="0" class="master"> <tr> <td height="100%" class="shadowLeft"> <div class="spacer"> </div> </td> <td valign="top"> <table cellpadding="0" cellspacing="0" width="100%" class="masterContent"> <tr style="height:0px"><td> <wssuc:DesignModeConsole id="IdDesignModeConsole" runat="server" __designer:Preview="<span __designer:NonVisual="true">[ DesignModeConsoleContainer "DesignModeContainer" ]</span> " __designer:Values="<P N='ID' ID='1' T='IdDesignModeConsole' /><P N='TemplateControl' R='0' />"/></td></tr> <tr> <td colspan="2" class="authoringRegion"> <span class="siteActionMenu"> <PublishingSiteAction:SiteActionMenu runat="server" __designer:Preview="  <table height=100% class="ms-siteaction" cellpadding=0 cellspacing=0> <tr> <td class="ms-siteactionsmenu" id="siteactiontd"> <span style="display:none"><menu type='ServerMenu' id="zz1_SiteActionsMenuMain" largeIconMode="true"><ie:menuitem id="zz2_MenuItem_Create" type="option" iconSrc="/_layouts/images/Actionscreate.gif" onMenuClick="window.location = '/_layouts/create.aspx';" menuGroupId="100"></ie:menuitem><ie:menuitem id="zz3_MenuItem_Settings" type="option" iconSrc="/_layouts/images/ActionsSettings.gif" onMenuClick="window.location = '/_layouts/settings.aspx';" menuGroupId="100"></ie:menuitem></menu></span><div><div><span title="Open Menu"><div id="zz4_SiteActionsMenu_t" class="" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-siteactionsmenuhover" hoverInactive="" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);" foa="MMU_GetMenuFromClientId('zz4_SiteActionsMenu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="zz4_SiteActionsMenu" accesskey="/" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid(''), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'), event);" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=zz4_SiteActionsMenu,TEMPLATECLIENTID=zz1_SiteActionsMenuMain" serverclientid="zz4_SiteActionsMenu">Site Actions<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/whitearrow.gif" alt="" /></div></span></div></div> </td> </tr> </table>  " __designer:Values="<P N='TemplateControl' R='0' />"/> </span> <div class="sharepointLogin">  <table cellpadding="0" cellspacing="0" > <tr> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink1" Scope="Farm" runat="server" __designer:Preview="<span style='padding-left:3px'></span> <a id="ctl00_ctl09_hlMySite" href="http://litwaredemo:80/MySite/_layouts/MySite.aspx">My Site</a> <span style='padding-left:4px;padding-right:3px'>|</span> " __designer:Values="<P N='ControlId' T='GlobalSiteLink1' /><P N='Scope' T='Farm' /><P N='ID' T='ctl08' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/></td> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink2" Scope="Farm" runat="server" __designer:Preview="<span id="ctl00_ctl11_MyLinksMenu"><span style="display:none"><menu type='ServerMenu' id="ctl00_ctl11_MyLinksMenuMenuTemplate" largeIconMode="true"></menu></span><span title="Open Menu"><span id="ctl00_ctl11_MyLinksMenuMenu_t" class="ms-SPLink ms-hovercellinactive" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-SPLink ms-hovercellactive" hoverInactive="ms-SPLink ms-hovercellinactive" onclick="javascript:FetchCallbackMenuItems(&#39;ctl00_ctl11_MyLinksMenuMenuTemplate&#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);" foa="MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="ctl00_ctl11_MyLinksMenuMenu" accesskey="M" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'), event);" onclick="javascript:FetchCallbackMenuItems(&#39;ctl00_ctl11_MyLinksMenuMenuTemplate&#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=ctl00_ctl11_MyLinksMenuMenu,TEMPLATECLIENTID=ctl00_ctl11_MyLinksMenuMenuTemplate" serverclientid="ctl00_ctl11_MyLinksMenuMenu">My Links<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/menudark.gif" alt="" /></span></span></span>|" __designer:Values="<P N='ControlId' T='GlobalSiteLink2' /><P N='Scope' T='Farm' /><P N='ID' T='ctl10' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/></td> <td class="ms-globallinks"> <wssuc:Welcome id="explitLogout" runat="server" __designer:Preview=" <span style="display:none"><menu type='ServerMenu' id="zz5_ID_PersonalActionMenu" largeIconMode="true"><ie:menuitem id="zz6_ID_PersonalInformation" type="option" iconSrc="/_layouts/images/menuprofile.gif" onMenuClick="javascript:GoToPage('\u002f_layouts\u002fuserdisp.aspx?Force=True\u0026ID=' + _spUserId);return false;" menuGroupId="100"></ie:menuitem><ie:menuitem id="zz7_ID_LoginAsDifferentUser" type="option" onMenuClick="javascript:LoginAsAnother('\u002f_layouts\u002fAccessDenied.aspx?loginasanotheruser=true', 0)" menuGroupId="200"></ie:menuitem><ie:menuitem id="zz8_ID_RequestAccess" type="option" onMenuClick="window.location = '/_layouts/reqacc.aspx?type=list&amp;name=%7B36F0105B%2D0F8E%2D4A22%2DBE90%2D716A51E97B5D%7D';" menuGroupId="200"></ie:menuitem><ie:menuitem id="zz9_ID_Logout" type="option" onMenuClick="window.location = '/_layouts/SignOut.aspx';" menuGroupId="200"></ie:menuitem></menu></span><span title="Open Menu"><div id="zz10_Menu_t" class="ms-SPLink ms-SpLinkButtonInActive" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-SPLink ms-SpLinkButtonActive" hoverInactive="ms-SPLink ms-SpLinkButtonInActive" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);" foa="MMU_GetMenuFromClientId('zz10_Menu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="zz10_Menu" accesskey="L" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid(''), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz10_Menu'), event);" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=zz10_Menu,TEMPLATECLIENTID=zz5_ID_PersonalActionMenu" serverclientid="zz10_Menu">Welcome LitwareInc Administrator<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/menudark.gif" alt="" /></div></span><script type="text/javascript" language="javascript">var _spUserId=1;</script> <a id="explitLogout_ExplicitLogin" Href="_controltemplates/http://litwaredemo/_layouts/Authenticate.aspx" style="display:none">Sign In</a> " __designer:Values="<P N='ID' ID='1' T='explitLogout' /><P N='TemplateControl' R='0' />"/></td> </tr> </table> </div> <div class="console"> <PublishingConsole:Console runat="server" __designer:Preview="  <span id="ctl00_publishingContext1"></span> <script type="text/javascript" language="javascript">if (document.getElementById('mpdmconsole')) { ShowConsoleBlockPaddingWithOverhang('mpLeftBackPadding', 'mpRightBackPadding', 'masterPageLeftOverhang', 'masterPageRightOverhang'); } </script>  " __designer:Values="<P N='TemplateControl' R='0' />"/> </div> </td> </tr> <tr> <td colspan="2" > <table cellpadding="0" cellspacing="0" width="100%"> <tr> <td colspan="4" class="topArea"> <SharePoint:AspMenu ID="logoLinkId" runat="server" DataSourceID="SiteMapDataSourceRoot" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="0" AccessKey="1" CssClass="logo" __designer:Preview="<table id="zz12_logoLinkId" class="logo" cellpadding="0" cellspacing="0" border="0"> <tr id="zz12_logoLinkIdn0"> <td><table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;width:100%;"><a Href="/Pages/Default.aspx" accesskey="1" style="text-decoration:none;">Home</a></td> </tr> </table></td> </tr> </table>" __designer:Values="<P N='ID' T='logoLinkId' /><P N='MaximumDynamicDisplayLevels' T='0' /><P N='DataSourceID' T='SiteMapDataSourceRoot' /><P N='AccessKey' T='1' /><P N='ControlStyle'><P N='CssClass' ID='1' T='logo' /><P N='Font' ID='2' /><P N='IsEmpty' T='False' /></P><P N='CssClass' R='1' /><P N='Font' R='2' /><P N='Page' ID='3' /><P N='TemplateControl' ID='4' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />" __designer:Templates="<Group Name="Item Templates"><Template Name="StaticItemTemplate" Flags="D" Content="" /><Template Name="DynamicItemTemplate" Flags="D" Content="" /></Group>"/> <PublishingNavigation:PortalSiteMapDataSource ID="SiteMapDataSourceRoot" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="true" __designer:Preview="<table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">PortalSiteMapDataSource</span> - SiteMapDataSourceRoot</td></tr> <tr><td></td></tr> </table>" __designer:Values="<P N='ID' T='SiteMapDataSourceRoot' /><P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /><P N='StartFromCurrentNode' T='True' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <div class="topLinkBar"> <div class="topLink"> <PublishingVariations:VariationsLabelMenu id="labelmenu1" runat="server" __designer:Preview="<span __designer:NonVisual="true"><table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">VariationDataSource</span> - LabelMenuDataSource</td></tr> <tr><td></td></tr> </table></span> " __designer:Values="<P N='ID' ID='1' T='labelmenu1' /><P N='TemplateControl' R='0' />"/> </div> </div> </td> </tr> <tr class="topNavContainer"> <td class="topNavRoundLeft"> <div class="glassSpacerLeft" /> </td> <td valign="top" width="100%"> <SharePoint:AspMenu ID="GlobalNav" Runat="server" DataSourceID="SiteMapDataSource1" Orientation="Horizontal" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="1" StaticSubMenuIndent="0" DynamicHorizontalOffset="0" DynamicVerticalOffset="-8" StaticEnableDefaultPopOutImage="false" ItemWrap="false" SkipLinkText="<%$Resources:cms,masterpages_skiplinktext%>" CssClass="topNav" __designer:Preview="<table id="zz13_GlobalNav" class="topNav" cellpadding="0" cellspacing="0" border="0"> <tr> <td title="Document Center site" id="zz13_GlobalNavn0"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/Docs" style="text-decoration:none;border-style:none;">Document Center</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Company News Home" id="zz13_GlobalNavn1"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/News/Pages/Default.aspx" style="text-decoration:none;border-style:none;">News</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Report Center" id="zz13_GlobalNavn2"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/Reports/Pages/Default.aspx" style="text-decoration:none;border-style:none;">Reports</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="The Search Center displays search results" id="zz13_GlobalNavn3"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/SearchCenter/Pages/default.aspx" style="text-decoration:none;border-style:none;">Search</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Site Directory web" id="zz13_GlobalNavn4"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/SiteDirectory/Pages/category.aspx" style="text-decoration:none;border-style:none;">Sites</a></td> </tr> </table></td><td style="width:0px;"></td> </tr> </table>" __designer:Values="<P N='ID' T='GlobalNav' /><P N='DynamicHoverStyle'><P N='CssClass' T='topNavFlyOutsHover' /><P N='IsEmpty' T='False' /></P><P N='DynamicMenuItemStyle'><P N='CssClass' T='topNavFlyOutsItem' /><P N='IsEmpty' T='False' /></P><P N='DynamicMenuStyle'><P N='CssClass' T='topNavFlyOuts' /><P N='IsEmpty' T='False' /></P><P N='DynamicVerticalOffset' T='-8' /><P N='MaximumDynamicDisplayLevels' T='1' /><P N='Orientation' E='0' /><P N='SkipLinkText' Bound='True' T='Resources:cms,masterpages_skiplinktext' /><P N='StaticEnableDefaultPopOutImage' T='False' /><P N='StaticHoverStyle'><P N='CssClass' T='topNavHover' /><P N='IsEmpty' T='False' /></P><P N='StaticMenuItemStyle'><P N='CssClass' T='topNavItem' /><P N='ItemSpacing' T='0px' /><P N='IsEmpty' T='False' /></P><P N='StaticSelectedStyle'><P N='CssClass' T='topNavSelected' /><P N='ItemSpacing' T='0px' /><P N='IsEmpty' T='False' /></P><P N='StaticSubMenuIndent' T='0px' /><P N='DataSourceID' T='SiteMapDataSource1' /><P N='ControlStyle'><P N='CssClass' ID='1' T='topNav' /><P N='Font' ID='2' /><P N='IsEmpty' T='False' /></P><P N='CssClass' R='1' /><P N='Font' R='2' /><P N='Page' ID='3' /><P N='TemplateControl' ID='4' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />" __designer:Templates="<Group Name="Item Templates"><Template Name="StaticItemTemplate" Flags="D" Content="" /><Template Name="DynamicItemTemplate" Flags="D" Content="" /></Group>"> <StaticMenuItemStyle CssClass="topNavItem" ItemSpacing="0"/> <StaticSelectedStyle CssClass="topNavSelected" ItemSpacing="0"/> <StaticHoverStyle CssClass="topNavHover"/> <DynamicMenuStyle CssClass="topNavFlyOuts" /> <DynamicMenuItemStyle CssClass="topNavFlyOutsItem" /> <DynamicHoverStyle CssClass="topNavFlyOutsHover"/> </SharePoint:AspMenu> <PublishingNavigation:PortalSiteMapDataSource ID="siteMapDataSource1" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="false" TreatStartingNodeAsCurrent="true" TrimNonCurrentTypes="Heading" __designer:Preview="<table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">PortalSiteMapDataSource</span> - siteMapDataSource1</td></tr> <tr><td></td></tr> </table>" __designer:Values="<P N='ID' T='siteMapDataSource1' /><P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /><P N='StartFromCurrentNode' T='True' /><P N='ShowStartingNode' T='False' /><P N='TreatStartingNodeAsCurrent' T='True' /><P N='TrimNonCurrentTypes' E='32' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> </td> <td> <div class="search"> <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server"> <SPSWC:SearchBoxEx id="SearchBox" RegisterStyles="false" TextBeforeDropDown="" TextBeforeTextBox="<%$Resources:cms,masterpages_searchbox_label%>" TextBoxWidth="100" GoImageUrl="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow.jpg %>" GoImageUrlRTL="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow_RTL.jpg %>" UseSiteDefaults="true" DropDownMode = "HideScopeDD" SuppressWebPartChrome="true" runat="server" WebPart="true" __WebPartId="{7DECDCCA-FDA0-4739-8F0E-7B8DE48F0E0D}" __Preview="<table TOPLEVEL border="0" cellpadding="0" cellspacing="0" width="100%"> <tr> <td><table border="0" cellpadding="0" cellspacing="0" width="100%"> <tr class="ms-WPHeader"> <td title="" id="WebPart

Read the article

Using amCharts in Ruby on Rails

- by Dexter

I have followed this tutorial in order to use amChart and it worked with no problems , now I am trying to generate a chart with amCharts to show each user and the sign in count but i cant make it work because it not getting the data correctly, what i am missing here ? how can i show user email and sign_in_count ? Users_controller.rb class UsersController < ApplicationController load_and_authorize_resource def index @users = User.all respond_to do |format| format.html # index.html.erb format.json { render :json => @users } end end def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save flash[:notice] = 'A new user created successfully.' redirect_to users_path else flash[:error] = 'An error occurred please try again!' redirect_to users_path end end def edit @user = User.find(params[:id]) end def update @user = User.find(params[:id]) if @user.update_attributes(params[:user]) flash[:notice] = 'Profile updated' redirect_to users_path else render 'edit' end end def destroy @user = User.find(params[:id]) if current_user == (@user) flash[:error] = "Admin suicide warning: Can't delete yourself." else @user.destroy flash[:notice] = 'User deleted' redirect_to users_path end end def checkname if User.where('user_name = ?', params[:user]).count == 0 render :nothing => true, :status => 200 else render :nothing => true, :status => 409 end return end end Users_helper.rb module UsersHelper def convert_to_amcharts_json(data_array) data_array.to_json.gsub(/\"text\"/, "text").html_safe end end index.html.erb <div id="chartdiv" style="width: 100%; height: 400px;"></div> <script type="text/javascript"> var chart; var chartData = <%= convert_to_amcharts_json(@users) %>; AmCharts.ready(function () { // SERIAL CHART chart = new AmCharts.AmSerialChart(); chart.dataProvider = chartData; chart.categoryField = "email"; // the following two lines makes chart 3D chart.depth3D = 20; chart.angle = 30; // AXES // category var categoryAxis = chart.categoryAxis; categoryAxis.labelRotation = 90; categoryAxis.dashLength = 5; categoryAxis.gridPosition = "start"; // value var valueAxis = new AmCharts.ValueAxis(); valueAxis.title = "Most Active users"; valueAxis.dashLength = 5; chart.addValueAxis(valueAxis); // GRAPH var graph = new AmCharts.AmGraph(); graph.valueField = "sign_in_count"; graph.colorField = "color"; graph.balloonText = "<span style='font-size:14px'>[[category]]: <b>[[value]]</b></span>"; graph.type = "column"; graph.lineAlpha = 0; graph.fillAlphas = 1; chart.addGraph(graph); // CURSOR var chartCursor = new AmCharts.ChartCursor(); chartCursor.cursorAlpha = 0; chartCursor.zoomable = false; chartCursor.categoryBalloonEnabled = false; chart.addChartCursor(chartCursor); // WRITE chart.write("chartdiv"); }); </script>

Read the article

Parallax backgrounds in OpenGL ES on the iPhone

- by Scott

I've got basically a 2d game on the iPhone and I'm trying to set up multiple backgrounds that scroll at different speeds (known as parallax backgrounds). So my thought was to just stick the backgrounds BEHIND the foreground using different z-coordinate planes, and just make them bigger than the foreground (in size) to accommodate, so that the whole thing can be scrolled (just at a different speed). And (as far as I know) I basically implemented that. The only problem is that it seems to entirely ignore whatever z-value I give it, or rather it just zeroes all of them. I see the background (I've only tested ONE background so far, to keep it simple...so for now I just have a foreground and I want one background scrolling at a different speed), but it scrolls 1:1 with my foreground, so it obviously doesn't look right, and most of it is cut off (cause it's bigger). And I've tried various z-values for the background and various near/far clipping planes...it's always the same. I'm probably just doing one simple thing wrong, but I can't figure it out. I'm wondering if it has to do with me using only 2 coordinates in glVertexPointer for the foreground? (Of course for the background I AM passing in 3) I'll post some code: This is some initial setup: glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrthof(-1.0f, 1.0f, -1.5f, 1.5f, -10.0f, 10.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnableClientState(GL_VERTEX_ARRAY); //glEnableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); //transparency glEnable (GL_BLEND); glBlendFunc (GL_ONE, GL_ONE_MINUS_SRC_ALPHA); A little bit about my foreground's float array....it's interleaved. For my foreground it goes vertex x, vertex y, texture x, texture y, repeat. This all works just fine. This is my FOREGROUND rendering: glVertexPointer(2, GL_FLOAT, 4*sizeof(GLfloat), texes); <br> glTexCoordPointer(2, GL_FLOAT, 4*sizeof(GLfloat), (GLvoid*)texes + 2*sizeof(GLfloat)); <br> glDrawArrays(GL_TRIANGLES, 0, indexCount / 4); BACKGROUND rendering: Same drill here except this time it goes vertex x, vertex y, vertex z, texture x, texture y, repeat. Note the z value this time. I did make sure the data in this array was correct while debugging (getting the right z values). And again, it shows up...it's just not going far back in the distance like it should. glVertexPointer(3, GL_FLOAT, 5*sizeof(GLfloat), b1Texes); glTexCoordPointer(2, GL_FLOAT, 5*sizeof(GLfloat), (GLvoid*)b1Texes + 3*sizeof(GLfloat)); glDrawArrays(GL_TRIANGLES, 0, b1IndexCount / 5); And to move my camera, I just do a simple glTranslatef(x, y, 0.0f); I'm not understanding what I'm doing wrong cause this seems like the most basic 3D function imaginable...things further away are smaller and don't move as fast when the camera moves. Not the case for me. Seems like it should be pretty basic and not even really be affected by my projection and all that (though I've even tried doing glFrustum just for fun, no success). Please help, I feel like it's just one dumb thing. I will post more code if necessary.

Read the article

SSL and mod_rewrite error

- by wnoveno

Hi, I have https on my site. Pages with rewritten URL in my site are inaccessible while direct urls (folders). here's the htaccess ## 2009-12-17 16:52 JGC [START] ## Enable http compression for this site <IfModule mod_deflate.c> SetOutputFilter DEFLATE ## Directive "DeflateCompressionLevel" not allowed in .htaccess, only valid in server config and virtual hosts # DeflateCompressionLevel 9 # file-types indicated will not be compressed SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary SetEnvIfNoCase Request_URI \.(?:swf|flv|pdf)$ no-gzip dont-vary SetEnvIfNoCase Request_URI \.(?:exe|t?gz|zip|gz2|sit|rar)$ no-gzip dont-vary <IfModule mod_headers.c> Header append Vary User-Agent </IfModule> </IfModule> ## 2009-12-17 16:52 JGC [END] ## 2010-03-05 16:05 JGC [START] #<IfModule mod_alias.c> #RedirectMatch 301 ^(/)$ /online-casino-poker-register.html #RedirectMatch 301 ^(/en)$ /en/online-casino-poker-register.html #RedirectMatch 301 ^(/en/)$ /en/online-casino-poker-register.html #RedirectMatch 301 ^(/en\.html)$ /en/online-casino-poker-register.html #RedirectMatch 301 ^(/sc)$ /sc/online-casino-poker-register.html #RedirectMatch 301 ^(/sc/)$ /sc/online-casino-poker-register.html #RedirectMatch 301 ^(/sc\.html)$ /sc/online-casino-poker-register.html #RedirectMatch 301 ^(/ch)$ /ch/online-casino-poker-register.html #RedirectMatch 301 ^(/ch/)$ /ch/online-casino-poker-register.html #RedirectMatch 301 ^(/ch\.html)$ /ch/online-casino-poker-register.html #</IfModule> ## 2010-03-05 16:05 JGC [END] ## # @version $Id: htaccess.txt 10492 2008-07-02 06:38:28Z ircmaxell $ # @package Joomla # @copyright Copyright (C) 2005 - 2008 Open Source Matters. All rights reserved. # @license http://www.gnu.org/copyleft/gpl.html GNU/GPL # Joomla! is Free Software ## ##################################################### # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. # ##################################################### ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks # # mod_rewrite in use RewriteEngine On #RewriteLog "/var/www/html/dafa888/rewrite.log" #RewriteLogLevel 3 RewriteCond %{HTTP_COOKIE} !jfcookie\[lang\] [NC] RewriteCond %{HTTP:Accept-Language} ^zh-cn [NC] RewriteRule ^$ /sc/ [L,R=301] RewriteCond %{HTTP_COOKIE} !jfcookie\[lang\] [NC] RewriteCond %{HTTP:Accept-Language} ^zh-tw [NC] RewriteRule ^$ /ch/ [L,R=301] #RewriteCond %{HTTP_COOKIE} !jfcookie[lang] [NC] #RewriteCond %{HTTP_COOKIE} jfcookie\[lang\] [NC] #RewriteCond %{HTTP_COOKIE} jfcookie\[lang\]=([^;]+) [NC] #RewriteRule ^(.*)$ /%1/$1 [NC,QSA] ########## Begin - Rewrite rules to block out some common exploits ## If you experience problems on your site block out the operations listed below ## This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to set a mosConfig value through the URL RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*$.*$ [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] # ########## End - Rewrite rules to block out some common exploits # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root) RewriteBase / #RewriteCond %{HTTP_HOST} ^(.*)$ [NC] #RewriteRule ^(.*)$ http://www.%1/$1 [R=301] ########## Begin - Joomla! core SEF Section # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # ########## End - Joomla! core SEF Section

Read the article

How can I get Firefox to update background-color on a:hover before a javascript routine is run?

- by Rob

I'm having a Firefox-specific issue with a script I wrote to create 3d layouts. The correct behavior is that the script pulls the background-color from an element and then uses that color to draw on the canvas. When a user mouses over a link and the background-color changes to the :hover rule, the color being drawn changes on the canvas changes as well. When the user mouses out, the color should revert back to non-hover color. This works as expected in Webkit browsers and Opera, but it seems like Firefox doesn't update the background-color in CSS immediately after a mouseout event occurs, so the current background-color doesn't get drawn if a mouseout occurs and it isn't followed up by another event that calls the draw() routine. It works just fine in Opera, Chrome, and Safari. How can I get Firefox to cooperate? I'm including the code that I believe is most relevant to my problem. Any advice on how I fix this problem and get a consistent effect would be very helpful. function drawFace(coord, mid, popColor,gs,x1,x2,side) { /*Gradients in our case run either up/down or left right. We have two algorithms depending on whether or not it's a sideways facing piece. Rather than parse the "rgb(r,g,b)" string(popColor) retrieved from elsewhere, it is simply offset with the gs variable to give the illusion that it starts at a darker color.*/ var canvas = document.getElementById('depth'); //This is for excanvas.js var G_vmlCanvasManager; if (G_vmlCanvasManager != undefined) { // ie IE G_vmlCanvasManager.initElement(canvas); } //Init canvas if (canvas.getContext) { var ctx = canvas.getContext('2d'); if (side) var lineargradient=ctx.createLinearGradient(coord[x1][0]+gs,mid[1],mid[0],mid[1]); else var lineargradient=ctx.createLinearGradient(coord[0][0],coord[2][1]+gs,coord[0][0],mid[1]); lineargradient.addColorStop(0,popColor); lineargradient.addColorStop(1,'black'); ctx.fillStyle=lineargradient; ctx.beginPath(); //Draw from one corner to the midpoint, then to the other corner, //and apply a stroke and a fill. ctx.moveTo(coord[x1][0],coord[x1][1]); ctx.lineTo(mid[0],mid[1]); ctx.lineTo(coord[x2][0],coord[x2][1]); ctx.stroke(); ctx.fill(); } } function draw(e) { var arr = new Array() var i = 0; var mid = new Array(2); $(".pop").each(function() { mid[0]=Math.round($(document).width()/2); mid[1]=Math.round($(document).height()/2); arr[arr.length++]=new getElemProperties(this,mid); i++; }); arr.sort(sortByDistance); clearCanvas(); for (a=0;a<i;a++) { /*In the following conditional statements, we're testing to see which direction faces should be drawn, based on a 1-point perspective drawn from the midpoint. In the first statement, we're testing to see if the lower-left hand corner coord[3] is higher on the screen than the midpoint. If so, we set it's gradient starting position to start at a point in space 60pixels higher(-60) than the actual side, and we also declare which corners make up our face, in this case the lower two corners, coord[3], and coord[2].*/ if (arr[a].bottomFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,3,2); if (arr[a].topFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,1); if (arr[a].leftFace) drawFace(arr[a].coord,mid,arr[a].popColor,60,0,3,true); if (arr[a].rightFace) drawFace(arr[a].coord,mid,arr[a].popColor,-60,1,2,true); } } $("a.pop").bind("mouseenter mouseleave focusin focusout",draw); If you need to see the effect in action, or if you want the full javascript code, you can check it out here: http://www.robnixondesigns.com/strangematter/

Read the article

Implement OAuth in Java

- by phineas

I made an an attempt to implement OAuth for my programming idea in Java, but I failed miserably. I don't know why, but my code doesn't work. Every time I run my program, an IOException is thrown with the reason "java.io.IOException: Server returned HTTP response code: 401" (401 means Unauthorized). I had a close look at the docs, but I really don't understand why it doesn't work. My OAuth provider I wanted to use is twitter, where I've registered my app, too. Thanks in advance phineas OAuth docs Twitter API wiki Class Base64Coder import java.io.InputStreamReader; import java.io.BufferedReader; import java.io.OutputStream; import java.io.IOException; import java.io.UnsupportedEncodingException; import java.net.URL; import java.net.URLEncoder; import java.net.URLConnection; import java.net.MalformedURLException; import javax.crypto.Mac; import javax.crypto.spec.SecretKeySpec; import java.security.NoSuchAlgorithmException; import java.security.InvalidKeyException; public class Request { public static String read(String url) { StringBuffer buffer = new StringBuffer(); try { /** * get the time - note: value below zero * the millisecond value is used for oauth_nonce later on */ int millis = (int) System.currentTimeMillis() * -1; int time = (int) millis / 1000; /** * Listing of all parameters necessary to retrieve a token * (sorted lexicographically as demanded) */ String[][] data = { {"oauth_callback", "SOME_URL"}, {"oauth_consumer_key", "MY_CONSUMER_KEY"}, {"oauth_nonce", String.valueOf(millis)}, {"oauth_signature", ""}, {"oauth_signature_method", "HMAC-SHA1"}, {"oauth_timestamp", String.valueOf(time)}, {"oauth_version", "1.0"} }; /** * Generation of the signature base string */ String signature_base_string = "POST&"+URLEncoder.encode(url, "UTF-8")+"&"; for(int i = 0; i < data.length; i++) { // ignore the empty oauth_signature field if(i != 3) { signature_base_string += URLEncoder.encode(data[i][0], "UTF-8") + "%3D" + URLEncoder.encode(data[i][1], "UTF-8") + "%26"; } } // cut the last appended %26 signature_base_string = signature_base_string.substring(0, signature_base_string.length()-3); /** * Sign the request */ Mac m = Mac.getInstance("HmacSHA1"); m.init(new SecretKeySpec("CONSUMER_SECRET".getBytes(), "HmacSHA1")); m.update(signature_base_string.getBytes()); byte[] res = m.doFinal(); String sig = String.valueOf(Base64Coder.encode(res)); data[3][1] = sig; /** * Create the header for the request */ String header = "OAuth "; for(String[] item : data) { header += item[0]+"=\""+item[1]+"\", "; } // cut off last appended comma header = header.substring(0, header.length()-2); System.out.println("Signature Base String: "+signature_base_string); System.out.println("Authorization Header: "+header); System.out.println("Signature: "+sig); String charset = "UTF-8"; URLConnection connection = new URL(url).openConnection(); connection.setDoInput(true); connection.setDoOutput(true); connection.setRequestProperty("Accept-Charset", charset); connection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded;charset=" + charset); connection.setRequestProperty("Authorization", header); connection.setRequestProperty("User-Agent", "XXXX"); OutputStream output = connection.getOutputStream(); output.write(header.getBytes(charset)); BufferedReader reader = new BufferedReader(new InputStreamReader(connection.getInputStream())); String read; while((read = reader.readLine()) != null) { buffer.append(read); } } catch(Exception e) { e.printStackTrace(); } return buffer.toString(); } public static void main(String[] args) { System.out.println(Request.read("http://api.twitter.com/oauth/request_token")); } }

Read the article

Why are there 3 conflicting OpenCV camera calibration formulas?

- by John

I'm having a problem with OpenCV's various parameterization of coordinates used for camera calibration purposes. The problem is that three different sources of information on image distortion formulae apparently give three non-equivalent description of the parameters and equations involved: (1) In their book "Learning OpenCV…" Bradski and Kaehler write regarding lens distortion (page 376): xcorrected = x * ( 1 + k1 * r^2 + k2 * r^4 + k3 * r^6 ) + [ 2 * p1 * x * y + p2 * ( r^2 + 2 * x^2 ) ], ycorrected = y * ( 1 + k1 * r^2 + k2 * r^4 + k3 * r^6 ) + [ p1 * ( r^2 + 2 * y^2 ) + 2 * p2 * x * y ], where r = sqrt( x^2 + y^2 ). Assumably, (x, y) are the coordinates of pixels in the uncorrected captured image corresponding to world-point objects with coordinates (X, Y, Z), camera-frame referenced, for which xcorrected = fx * ( X / Z ) + cx and ycorrected = fy * ( Y / Z ) + cy, where fx, fy, cx, and cy, are the camera's intrinsic parameters. So, having (x, y) from a captured image, we can obtain the desired coordinates ( xcorrected, ycorrected ) to produced an undistorted image of the captured world scene by applying the above first two correction expressions. However... (2) The complication arises as we look at OpenCV 2.0 C Reference entry under the Camera Calibration and 3D Reconstruction section. For ease of comparison we start with all world-point (X, Y, Z) coordinates being expressed with respect to the camera's reference frame, just as in #1. Consequently, the transformation matrix [ R | t ] is of no concern. In the C reference, it is expressed that: x' = X / Z, y' = Y / Z, x'' = x' * ( 1 + k1 * r'^2 + k2 * r'^4 + k3 * r'^6 ) + [ 2 * p1 * x' * y' + p2 * ( r'^2 + 2 * x'^2 ) ], y'' = y' * ( 1 + k1 * r'^2 + k2 * r'^4 + k3 * r'^6 ) + [ p1 * ( r'^2 + 2 * y'^2 ) + 2 * p2 * x' * y' ], where r' = sqrt( x'^2 + y'^2 ), and finally that u = fx * x'' + cx, v = fy * y'' + cy. As one can see these expressions are not equivalent to those presented in #1, with the result that the two sets of corrected coordinates ( xcorrected, ycorrected ) and ( u, v ) are not the same. Why the contradiction? It seems to me the first set makes more sense as I can attach physical meaning to each and every x and y in there, while I find no physical meaning in x' = X / Z and y' = Y / Z when the camera focal length is not exactly 1. Furthermore, one cannot compute x' and y' for we don't know (X, Y, Z). (3) Unfortunately, things get even murkier when we refer to the writings in Intel's Open Source Computer Vision Library Reference Manual's section Lens Distortion (page 6-4), which states in part: "Let ( u, v ) be true pixel image coordinates, that is, coordinates with ideal projection, and ( u ~, v ~ ) be corresponding real observed (distorted) image coordinates. Similarly, ( x, y ) are ideal (distortion-free) and ( x ~, y ~ ) are real (distorted) image physical coordinates. Taking into account two expansion terms gives the following: x ~ = x * ( 1 + k1 * r^2 + k2 * r^4 ) + [ 2 p1 * x * y + p2 * ( r^2 + 2 * x^2 ) ] y ~ = y * ( 1 + k1 * r^2 + k2 * r^4 ] + [ 2 p2 * x * y + p2 * ( r^2 + 2 * y^2 ) ], where r = sqrt( x^2 + y^2 ). ... "Because u ~ = cx + fx * u and v ~ = cy + fy * v , … the resultant system can be rewritten as follows: u ~ = u + ( u – cx ) * [ k1 * r^2 + k2 * r^4 + 2 * p1 * y + p2 * ( r^2 / x + 2 * x ) ] v ~ = v + ( v – cy ) * [ k1 * r^2 + k2 * r^4 + 2 * p2 * x + p1 * ( r^2 / y + 2 * y ) ] The latter relations are used to undistort images from the camera." Well, it would appear that the expressions involving x ~ and y ~ coincided with the two expressions given at the top of this writing involving xcorrected and ycorrected. However, x ~ and y ~ do not refer to corrected coordinates, according to the given description. I don't understand the distinction between the meaning of the coordinates ( x ~, y ~ ) and ( u ~, v ~ ), or for that matter, between the pairs ( x, y ) and ( u, v ). From their descriptions it appears their only distinction is that ( x ~, y ~ ) and ( x, y ) refer to 'physical' coordinates while ( u ~, v ~ ) and ( u, v ) do not. What is this distinction all about? Aren't they all physical coordinates? I'm lost! Thanks for any input!

Read the article

matplotlib and python multithread file processing

- by Napseis

I have a large number of files to process. I have written a script that get, sort and plot the datas I want. So far, so good. I have tested it and it gives the desired result. Then I wanted to do this using multithreading. I have looked into the doc and examples on the internet, and using one thread in my program works fine. But when I use more, at some point I get random matplotlib error, and I suspect some conflict there, even though I use a function with names for the plots, and iI can't see where the problem could be. Here is the whole script should you need more comment, i'll add them. Thank you. #!/usr/bin/python import matplotlib matplotlib.use('GTKAgg') import numpy as np from scipy.interpolate import griddata import matplotlib.pyplot as plt import matplotlib.colors as mcl from matplotlib import rc #for latex import time as tm import sys import threading import Queue #queue in 3.2 and Queue in 2.7 ! import pdb #the debugger rc('text', usetex=True)#for latex map=0 #initialize the map index. It will be use to index the array like this: array[map,[x,y]] time=np.zeros(1) #an array to store the time middle_h=np.zeros((0,3)) #x phi c #for the middle of the box current_file=open("single_void_cyl_periodic_phi_c_middle_h_out",'r') for line in current_file: if line.startswith('# === time'): map+=1 np.append(time,[float(line.strip('# === time '))]) elif line.startswith('#'): pass else: v=np.fromstring(line,dtype=float,sep=' ') middle_h=np.vstack( (middle_h,v[[1,3,4]]) ) current_file.close() middle_h=middle_h.reshape((map,-1,3)) #3d array: map, x, phi,c ##### def load_and_plot(): #will load a map file, and plot it along with the corresponding profile loaded before while not exit_flag: print("fecthing work ...") #try: if not tasks_queue.empty(): map_index=tasks_queue.get() print("----> working on map: %s" %map_index) x,y,zp=np.loadtxt("single_void_cyl_growth_periodic_post_map_"+str(map_index),unpack=True, usecols=[1, 2,3]) for i,el in enumerate(zp): if el<0.: zp[i]=0. xv=np.unique(x) yv=np.unique(y) X,Y= np.meshgrid(xv,yv) Z = griddata((x, y), zp, (X, Y),method='nearest') figure=plt.figure(num=map_index,figsize=(14, 8)) ax1=plt.subplot2grid((2,2),(0,0)) ax1.plot(middle_h[map_index,:,0],middle_h[map_index,:,1],'*b') ax1.grid(True) ax1.axis([-15, 15, 0, 1]) ax1.set_title('Profiles') ax1.set_ylabel(r'$\phi$') ax1.set_xlabel('x') ax2=plt.subplot2grid((2,2),(1,0)) ax2.plot(middle_h[map_index,:,0],middle_h[map_index,:,2],'*r') ax2.grid(True) ax2.axis([-15, 15, 0, 1]) ax2.set_ylabel('c') ax2.set_xlabel('x') ax3=plt.subplot2grid((2,2),(0,1),rowspan=2,aspect='equal') sub_contour=ax3.contourf(X,Y,Z,np.linspace(0,1,11),vmin=0.) figure.colorbar(sub_contour,ax=ax3) figure.savefig('single_void_cyl_'+str(map_index)+'.png') plt.close(map_index) tasks_queue.task_done() else: print("nothing left to do, other threads finishing,sleeping 2 seconds...") tm.sleep(2) # except: # print("failed this time: %s" %map_index+". Sleeping 2 seconds") # tm.sleep(2) ##### exit_flag=0 nb_threads=2 tasks_queue=Queue.Queue() threads_list=[] jobs=list(range(map)) #each job is composed of a map print("inserting jobs in the queue...") for job in jobs: tasks_queue.put(job) print("done") #launch the threads for i in range(nb_threads): working_bee=threading.Thread(target=load_and_plot) working_bee.daemon=True print("starting thread "+str(i)+' ...') threads_list.append(working_bee) working_bee.start() #wait for all tasks to be treated tasks_queue.join() #flip the flag, so the threads know it's time to stop exit_flag=1 for t in threads_list: print("waiting for threads %s to stop..."%t) t.join() print("all threads stopped")

Read the article

Trouble Percent-Encoding Spaces in Java

- by behrk2

Hi Everyone, I am using the URLUTF8Encoder.java class from W3C (www.w3.org/International/URLUTF8Encoder.java). Currently, it will encode any blank spaces ' ' into plus signs '+'. I am having difficulty modifying the code to percent-encode the blank space into '%20'. Unfortunately, I am not too familiar with hex. Can anyone help me out? I need to modify this snippet... else if (ch == ' ') { // space sbuf.append('+'); in the following code: final static String[] hex = { "%00", "%01", "%02", "%03", "%04", "%05", "%06", "%07", "%08", "%09", "%0A", "%0B", "%0C", "%0D", "%0E", "%0F", "%10", "%11", "%12", "%13", "%14", "%15", "%16", "%17", "%18", "%19", "%1A", "%1B", "%1C", "%1D", "%1E", "%1F", "%20", "%21", "%22", "%23", "%24", "%25", "%26", "%27", "%28", "%29", "%2A", "%2B", "%2C", "%2D", "%2E", "%2F", "%30", "%31", "%32", "%33", "%34", "%35", "%36", "%37", "%38", "%39", "%3A", "%3B", "%3C", "%3D", "%3E", "%3F", "%40", "%41", "%42", "%43", "%44", "%45", "%46", "%47", "%48", "%49", "%4A", "%4B", "%4C", "%4D", "%4E", "%4F", "%50", "%51", "%52", "%53", "%54", "%55", "%56", "%57", "%58", "%59", "%5A", "%5B", "%5C", "%5D", "%5E", "%5F", "%60", "%61", "%62", "%63", "%64", "%65", "%66", "%67", "%68", "%69", "%6A", "%6B", "%6C", "%6D", "%6E", "%6F", "%70", "%71", "%72", "%73", "%74", "%75", "%76", "%77", "%78", "%79", "%7A", "%7B", "%7C", "%7D", "%7E", "%7F", "%80", "%81", "%82", "%83", "%84", "%85", "%86", "%87", "%88", "%89", "%8A", "%8B", "%8C", "%8D", "%8E", "%8F", "%90", "%91", "%92", "%93", "%94", "%95", "%96", "%97", "%98", "%99", "%9A", "%9B", "%9C", "%9D", "%9E", "%9F", "%A0", "%A1", "%A2", "%A3", "%A4", "%A5", "%A6", "%A7", "%A8", "%A9", "%AA", "%AB", "%AC", "%AD", "%AE", "%AF", "%B0", "%B1", "%B2", "%B3", "%B4", "%B5", "%B6", "%B7", "%B8", "%B9", "%BA", "%BB", "%BC", "%BD", "%BE", "%BF", "%C0", "%C1", "%C2", "%C3", "%C4", "%C5", "%C6", "%C7", "%C8", "%C9", "%CA", "%CB", "%CC", "%CD", "%CE", "%CF", "%D0", "%D1", "%D2", "%D3", "%D4", "%D5", "%D6", "%D7", "%D8", "%D9", "%DA", "%DB", "%DC", "%DD", "%DE", "%DF", "%E0", "%E1", "%E2", "%E3", "%E4", "%E5", "%E6", "%E7", "%E8", "%E9", "%EA", "%EB", "%EC", "%ED", "%EE", "%EF", "%F0", "%F1", "%F2", "%F3", "%F4", "%F5", "%F6", "%F7", "%F8", "%F9", "%FA", "%FB", "%FC", "%FD", "%FE", "%FF" }; public static String encode(String s) { StringBuffer sbuf = new StringBuffer(); int len = s.length(); for (int i = 0; i < len; i++) { int ch = s.charAt(i); if ('A' <= ch && ch <= 'Z') { // 'A'..'Z' sbuf.append((char) ch); } else if ('a' <= ch && ch <= 'z') { // 'a'..'z' sbuf.append((char) ch); } else if ('0' <= ch && ch <= '9') { // '0'..'9' sbuf.append((char) ch); } else if (ch == ' ') { // space sbuf.append('+'); } else if (ch == '-' || ch == '_' // unreserved || ch == '.' || ch == '!' || ch == '~' || ch == '*' || ch == '\'' || ch == '(' || ch == ')') { sbuf.append((char) ch); } else if (ch <= 0x007f) { // other ASCII sbuf.append(hex[ch]); } else if (ch <= 0x07FF) { // non-ASCII <= 0x7FF sbuf.append(hex[0xc0 | (ch >> 6)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } else { // 0x7FF < ch <= 0xFFFF sbuf.append(hex[0xe0 | (ch >> 12)]); sbuf.append(hex[0x80 | ((ch >> 6) & 0x3F)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } } return sbuf.toString(); } Thanks!

Read the article

ublas::bounded_vector<> being resized?

- by n2liquid

Now, seriously... I'll refrain from using bad words here because we're talking about the Boost fellows. It MUST be my mistake to see things this way, but I can't understand why, so I'll ask it here; maybe someone can enlighten me in this matter. Here it goes: uBLAS has this nice class template called bounded_vector<> that's used to create fixed-size vectors (or so I thought). From the Effective uBLAS wiki (http://www.crystalclearsoftware.com/cgi-bin/boost_wiki/wiki.pl?Effective_UBLAS): The default uBLAS vector and matrix types are of variable size. Many linear algebra problems involve vectors with fixed size. 2 and 3 elements are common in geometry! Fixed size storage (akin to C arrays) can be implemented efficiently as it does not involve the overheads (heap management) associated with dynamic storage. uBLAS implements fixed sizes by changing the underling storage of a vector/matrix to a "bounded_array" from the default "unbounded_array". Alright, this bounded_vector<> thing is used to free you from specifying the underlying storage of the vector to a bounded_array<> of the specified size. Here I ask you: doesn't it look like this bounded vector thing has fixed size to you? Well, it doesn't have. At first I felt betrayed by the wiki, but then I reconsidered the meaning of "bounded" and I think I can let it pass. But in case you, like me (I'm still uncertain), is still wondering if this makes sense, what I found out is that the bounded_vector<> actually can be resized, it may only not be greater than the size specified as template parameter. So, first off, do you think they've had a good reason not to make a real fixed<< size vector or matrix type? Do you think it's okay to "sell" this bounded -- as opposed to fixed-size -- vector to the users of my library as a "fixed-size" vector replacement, even named "Vector3" or "Vector2", like the Effective uBLAS wiki did? Do you think I should somehow implement a vector with fixed size for this purpose? If so, how? (Sorry, but I'm really new to uBLAS; just tried it today) I am developing a 3D game. Should uBLAS be used for the calculations involved in this ("hey, geometry!", per Effective uBLAS wiki)? What replacement would you suggest, if not? -- edit And just in case, yes, I've read this warning: It should be noted that this only changes the storage uBLAS uses for the vector3. uBLAS will still use all the same algorithm (which assume a variable size) to manipulate the vector3. In practice this seems to have no negative impact on speed. The above runs just as quickly as a hand crafted vector3 which does not use uBLAS. The only negative impact is that the vector3 always store a "size" member which in this case is redundant [or isn't it? I mean......]. I see it uses the same algorithm, assuming a variable size, but if an operation were to actually change its size, shouldn't it be stopped (assertion)? ublas::bounded_vector<float,3> v3; ublas::bounded_vector<float,2> v2; v3 = v2; std::cout << v3.size() << '\n'; // prints 2 Oh, come on, isn't this just plain betrayal?

Read the article

Populating a GridView with ImageViews dynamically/programmatically using a ImageAdapter

- by Julian Vogels

Hi folks, this is my first question at stackoverflow, but it's a little tricky already... I try to develop an Android App which allows the user to fetch data from flickr and show it in a gridview (with some nice 3D-Animation). After some adventures i got it almost running, but now I'm stuck. Here's the problem: I got a UI Thread "LoadPhotosTask" which gets the pictures from flickr, just like the open source application photostream. In the method onProgressUpdate(LoadedPhoto... value) of that subclass I call addPhoto(). Until now everythings fine - I got some nice Bitmap and Flickr.photo data with all the information I need. @Override public void onProgressUpdate(LoadedPhoto... value) { addPhoto(value); } On the other hand I have got a GridView. Now I want to fill it with the Photos. It has got an adapter called ImageAdapter (which extends BaseAdapter, see this tutorial). If I use an array inside the ImageAdapter class I can populate the GridView with some sample images. But if I want to populate it at runtime, I don't know what to do. How do I have to set up the getView method in the ImageAdapter? I was trying to fill the array inside the ImageAdapter class with my values in addPhoto, but it doesn't display anything. So first of all I was setting up the array with the amount of Photos i wanted to display in the grid like that (code is inside the ImageAdapter class): // class variable private ImageView[] mThumbIds; [...] public void setupArray(int count) { this.mThumbIds = new ImageView[count]; } Then I call this method with the lenght of my photolist: final Flickr.PhotoList list = params[0]; final int count = list.getCount(); int helper = 0; imagead.setupArray(count); Afterwards I call the getView method manually inside the addPhoto method: private void addPhoto(LoadedPhoto... value) { ImageView image = (ImageView) mInflater.inflate( R.layout.grid_item_photo, null); image.setImageBitmap(value[0].mBitmap); image.setTag(value[0].mPhoto); imagead.setmThumbIds(image, value[0].mPosition); imagead.getView(value[0].mPosition, null, mpicturesGrid); } That is the getView method inside ImageAdapter: public View getView(int position, View convertView, ViewGroup parent) { if (convertView == null) { // if it's not recycled, initialize some // attributes imageView = new ImageView(mContext); imageView.setLayoutParams(new GridView.LayoutParams(EDGE_LENGTH, EDGE_LENGTH)); imageView.setScaleType(ImageView.ScaleType.CENTER_CROP); imageView.setPadding(0, 0, 0, 0); imageView.setVisibility(View.VISIBLE); } else { imageView = (ImageView) convertView; } imageView.setImageDrawable(mThumbIds[position].getDrawable()); imageView.setTag(mThumbIds[position].getTag()); return imageView; } Ok, finally I apologize for my poor english and I hope you can give me some help with the information I provided. Greetings, Julian

Read the article

Does anyone know how to layout a JToolBar that does't move or re-size any components placed in it?

- by S1.Mac

Can anyone help with this problem i'm trying to create a JToolBar and I want all its components to be fixed in size and position. I'v tried a few different layout managers but they all center and/or re-size the components when the frame its in is re-sized. here is an example using GridbagLayout, I have also used the default layout manager using the toolbar.add( component ) method but the result is the same : ' import java.awt.BorderLayout; import java.awt.Component; import java.awt.Dimension; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import javax.swing.*; public class ToolBarTest extends JFrame { private JToolBar toolbar; private JPanel mainPanel; private JPanel toolBarPanel; private JButton aButton; private JCheckBox aCheckBox; private JList aList; private Box toolbarBox; private GridBagConstraints toolbarConstraints; private GridBagLayout toolbarLayout; private JLabel shapeLabel; private JComboBox<ImageIcon> shapeChooser; private JLabel colorLabel; private JComboBox colorChooser; private String colorNames[] = { "Black" , "Blue", "Cyan", "Dark Gray", "Gray", "Green", "Light Gray", "Magenta", "Orange", "Pink", "Red", "White", "Yellow", "Custom" }; private String shapeNames[] = { "Line", "Oval", "Rectangle", "3D Rectangle","Paint Brush", "Rounded Rectangle" }; public ToolBarTest() { setLayout( new BorderLayout() ); setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE ); setSize( 500, 500 ); add( createToolBar(), BorderLayout.PAGE_START ); setVisible( true ); } public void addToToolbar( Component component, int row, int column ) { toolbarConstraints.gridx = column; toolbarConstraints.gridy = row; toolbarConstraints.anchor = GridBagConstraints.WEST; toolbarConstraints.fill = GridBagConstraints.NONE; toolbarConstraints.weightx = 0; toolbarConstraints.weighty = 0; toolbarConstraints.gridwidth = 1; toolbarConstraints.gridheight = 1; toolbarLayout.setConstraints( component, toolbarConstraints ); toolbar.add( component ); }// end addToToolbar public final JToolBar createToolBar() { toolbarLayout = new GridBagLayout(); toolbarConstraints = new GridBagConstraints(); // create the tool bar which holds the items to draw toolbar = new JToolBar(); toolbar.setBorderPainted(true); toolbar.setLayout( toolbarLayout ); toolbar.setFloatable( true ); shapeLabel = new JLabel( "Shapes: " ); addToToolbar( shapeLabel, 0, 1 ); String iconNames[] = { "PaintImages/Line.jpg", "PaintImages/Oval.jpg", "PaintImages/Rect.jpg", "PaintImages/3DRect.jpg","PaintImages/PaintBrush.jpg", "PaintImages/RoundRect.jpg"}; ImageIcon shapeIcons[] = new ImageIcon[ shapeNames.length ]; // create image icons for( int shapeButton = 0; shapeButton < shapeNames.length; shapeButton++ ) { shapeIcons[ shapeButton ] = new ImageIcon( iconNames[ shapeButton ] ); }// end for shapeChooser = new JComboBox< ImageIcon >( shapeIcons ); shapeChooser.setSize( new Dimension( 50, 20 )); shapeChooser.setPrototypeDisplayValue( shapeIcons[ 0 ] ); shapeChooser.setSelectedIndex( 0 ); addToToolbar( shapeChooser, 0, 2 ); colorLabel = new JLabel( "Colors: " ); addToToolbar( colorLabel, 0, 3 ); colorChooser = new JComboBox( colorNames ); addToToolbar( colorChooser, 0, 4 ); return toolbar; }// end createToolBar public static void main( String args[] ) { new ToolBarTest(); }// end main }// end class ToolBarTest'

Read the article

convert pixels into image

- by Zeta Op

what i am trying to do is to convert a pixel from a video cam, into an image to expalin it better imagine a 3d model so.. the pixels would be each polying, and i want to do is to conver each polyigon into an image. what i have so far is this ** import processing.video.*; PImage hoja; Capture cam; boolean uno, dos, tres, cuatro; import ddf.minim.*; Minim minim; AudioPlayer audio; float set; void setup() { //audio minim = new Minim(this); // audio = minim.loadFile("audio"); // audio.loop(); // uno=false; dos=false; tres=false; cuatro=true; size(640, 480); hoja=loadImage("hoja.gif"); cam = new Capture(this, width, height); cam.start(); } void draw() { if (cam.available() == true) { cam.read(); if (uno==true) { filtroUno(); image(cam, 0, 0, 640, 480); } if (dos==true) { filtroDos(); } if(tres==true){ filtroTres(); } if(cuatro==true){ filtroCuatro(); image(cam, set, 0,640,480); } } // The following does the same, and is faster when just drawing the image // without any additional resizing, transformations, or tint. //set(0, 0, cam); } void filtroUno() { cam.loadPixels(); hoja.loadPixels(); for (int i=0;i<cam.pixels.length;i++) { if (brightness(cam.pixels[i])>110) { cam.pixels[i]=color(0, 255, 255); } else { cam.pixels[i]=color(255, 0, 0); } } for (int i=0;i<cam.width;i+=10) { for (int j=0;j<cam.height;j+=10) { int loc=i+(j*cam.width); if (cam.pixels[loc]==color(255, 0, 0)) { for (int x=i;x<i+10;x++) { for (int y=j;y<j+10;y++) { // println("bla"); int locDos=i+(j*cam.width); cam.pixels[locDos]=hoja.get(x, y); } } } } } cam.updatePixels(); } ** the broblem is that each pixel is creating me a matrix, so.. is not recreating what id that to do. i had the method filtroUno but it wasn't showing ok.. and was the result void filtroUno() { cam.loadPixels(); hoja.loadPixels(); for (int i=0;i<cam.pixels.length;i++) { if (brightness(cam.pixels[i])>110) { cam.pixels[i]=color(0, 255, 255); } else { cam.pixels[i]=color(255, 0, 0); } } for (int i=0;i<cam.width;i+=10) { for (int j=0;j<cam.height;j+=10) { int loc=i+j*hoja.width*10; if (cam.pixels[loc]==color(255, 0, 0)) { for (int x=i;x<i+10;x++) { for (int y=j;y<j+10;y++) { // println("bla"); int locDos=x+y*hoja.height*10; cam.pixels[locDos]=hoja.get(x, y); } } } } } cam.updatePixels(); } i hope you can help me thanks note: each red pixel should be the gif image the imge size is 10x10

Read the article

Wordpress blog with Joomla?

- by user427902

Hi, I had this Wordpress installation which was installed in a subfolder (not root). Like http: //server/blog/. Now, I installed Joomla on the root (http: //server/). Everything seems to be working fine with the Joomla part. However, the blog part is messed up. If I try to browse the homepage of my blog which is http: //server/blog/ it works like a charm. But while trying to view individual blog pages like say, http: //server/blog/some_category/some_post I get a Joomla 404 page. So, I was wondering if it was possible to use both Wordpress and Joomla in the same server in the setup I am trying to. Let me clarify that I am NOT looking to integrate user login and other such things. I just want the blog to be functional under a subfolder while I run the Joomla site in the root. So, what is the correct way to go about it. Can this be solved by any .config edits or something else? Edit: Here's the .htaccess for Joomla ... (I can't find any .htaccess for Wp though, still looking for it.) ## # @version $Id: htaccess.txt 14401 2010-01-26 14:10:00Z louis $ # @package Joomla # @copyright Copyright (C) 2005 - 2010 Open Source Matters. All rights reserved. # @license http://www.gnu.org/copyleft/gpl.html GNU/GPL # Joomla! is Free Software ## ##################################################### # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. # ##################################################### ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks # # mod_rewrite in use RewriteEngine On ########## Begin - Rewrite rules to block out some common exploits ## If you experience problems on your site block out the operations listed below ## This attempts to block the most common type of exploit `attempts` to Joomla! # ## Deny access to extension xml files (uncomment out to activate) #<Files ~ "\.xml$"> #Order allow,deny #Deny from all #Satisfy all #</Files> ## End of deny access to extension xml files RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*$.*$ [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] # ########## End - Rewrite rules to block out some common exploits # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root) # RewriteBase / ########## Begin - Joomla! core SEF Section # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # ########## End - Joomla! core SEF Section

Read the article

Decomposing a rotation matrix

- by DeadMG

I have a rotation matrix. How can I get the rotation around a specified axis contained within this matrix? Edit: It's a 3D matrix (4x4), and I want to know how far around a predetermined (not contained) axis the matrix rotates. I can already decompose the matrix but D3DX will only give the entire matrix as one rotation around one axis, whereas I need to split the matrix up into angle of rotation around an already-known axis, and the rest. Sample code and brief problem description: D3DXMATRIX CameraRotationMatrix; D3DXVECTOR3 CameraPosition; //D3DXVECTOR3 CameraRotation; inline D3DXMATRIX GetRotationMatrix() { return CameraRotationMatrix; } inline void TranslateCamera(float x, float y, float z) { D3DXVECTOR3 rvec, vec(x, y, z); #pragma warning(disable : 4238) D3DXVec3TransformNormal(&rvec, &vec, &GetRotationMatrix()); #pragma warning(default : 4238) CameraPosition += rvec; RecomputeVPMatrix(); } inline void RotateCamera(float x, float y, float z) { D3DXVECTOR3 RotationRequested(x, y, z); D3DXVECTOR3 XAxis, YAxis, ZAxis; D3DXMATRIX rotationx, rotationy, rotationz; XAxis = D3DXVECTOR3(1, 0, 0); YAxis = D3DXVECTOR3(0, 1, 0); ZAxis = D3DXVECTOR3(0, 0, 1); #pragma warning(disable : 4238) D3DXVec3TransformNormal(&XAxis, &XAxis, &GetRotationMatrix()); D3DXVec3TransformNormal(&YAxis, &YAxis, &GetRotationMatrix()); D3DXVec3TransformNormal(&ZAxis, &ZAxis, &GetRotationMatrix()); #pragma warning(default : 4238) D3DXMatrixIdentity(&rotationx); D3DXMatrixIdentity(&rotationy); D3DXMatrixIdentity(&rotationz); D3DXMatrixRotationAxis(&rotationx, &XAxis, RotationRequested.x); D3DXMatrixRotationAxis(&rotationy, &YAxis, RotationRequested.y); D3DXMatrixRotationAxis(&rotationz, &ZAxis, RotationRequested.z); CameraRotationMatrix *= rotationz; CameraRotationMatrix *= rotationy; CameraRotationMatrix *= rotationx; RecomputeVPMatrix(); } inline void RecomputeVPMatrix() { D3DXMATRIX ProjectionMatrix; D3DXMatrixPerspectiveFovLH( &ProjectionMatrix, FoV, (float)D3DDeviceParameters.BackBufferWidth / (float)D3DDeviceParameters.BackBufferHeight, FarPlane, NearPlane ); D3DXVECTOR3 CamLookAt; D3DXVECTOR3 CamUpVec; #pragma warning(disable : 4238) D3DXVec3TransformNormal(&CamLookAt, &D3DXVECTOR3(1, 0, 0), &GetRotationMatrix()); D3DXVec3TransformNormal(&CamUpVec, &D3DXVECTOR3(0, 1, 0), &GetRotationMatrix()); #pragma warning(default : 4238) D3DXMATRIX ViewMatrix; #pragma warning(disable : 4238) D3DXMatrixLookAtLH(&ViewMatrix, &CameraPosition, &(CamLookAt + CameraPosition), &CamUpVec); #pragma warning(default : 4238) ViewProjectionMatrix = ViewMatrix * ProjectionMatrix; D3DVIEWPORT9 vp = { 0, 0, D3DDeviceParameters.BackBufferWidth, D3DDeviceParameters.BackBufferHeight, 0, 1 }; D3DDev->SetViewport(&vp); } Effectively, after a certain time, when RotateCamera is called, it begins to rotate in the relative X axis- even though constant zero is passed in for that request when responding to mouse input, so I know that when moving the mouse, the camera should not roll at all. I tried spamming 0,0,0 requests and saw no change (one per frame at 1500 frames per second), so I'm fairly sure that I'm not seeing FP error or matrix accumulation error. I tried writing a RotateCameraYZ function and stripping all X-axis from the function. I've spent several days trying to discover why this is the case, and eventually decided on just hacking around it. Just for reference, I've seen some diagrams on Wikipedia, and I actually have a relatively strange axis layout, which is Y axis up, but X axis forwards and Z axis right, so Y axis yaw, Z axis pitch, X axis roll.

Read the article

Type for use in template object to compare double values

- by DaClown

I got this n-dimensional point object: template <class T, unsigned int dimension> class Obj { protected: T coords[dimension]; static const unsigned int size = dimension; public: Obj() { }; Obj(T def) { for (unsigned int i = 0; i < size; ++i) coords[i]=def; }; Obj(const Obj& o) { for (unsigned int i = 0; i < size; ++i) coords[i] = o.coords[i]; } const Obj& operator= (const Obj& rhs) { if (this != &rhs) for (unsigned int i = 0; i < size; ++i) coords[i] = rhs.coords[i]; return *this; } virtual ~Obj() { }; T get (unsigned int id) { if (id >= size) throw std::out_of_range("out of range"); return coords[id]; } void set (unsigned int id, T t) { if (id >= size) throw std::out_of_range("out of range"); coords[id] = t; } }; and a 3D point class which uses Obj as base class: template <class U> class Point3DBase : public Obj<U,3> { typedef U type; public: U &x, &y, &z; public: Point3DBase() : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { }; Point3DBase(U def) : Obj<U,3>(def), x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { }; Point3DBase(U x_, U y_, U z_) : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { x = x_; y = y_; z= z_; }; Point3DBase(const Point3DBase& other) : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { x = other.x; y = other.y; z = other.z; } // several operators ... }; The operators, basically the ones for comparison, use the simple compare-the-member-object approach like: virtual friend bool operator== (const Point3DBase<U> &lhs, const Point3DBase<U> rhs) { return (lhs.x == rhs.x && lhs.y == rhs.y && lhs.z == rhs.z); } Then it occured to me that for the comparion of double values the simply equality approach is not very useful since double values should be compared with an error margin. What would be the best approach to introduce an error margin into the point? I thought about an epsDouble type as template parameter but I can't figure out how to achieve this.

Read the article

Form submission info showing up in URL and not working

- by kcurtin

I am making a Rails 3.1 app and have a signup form that was working fine, but I seemed to have changed something to break it.. I'm using Twitter bootstrap and twitter_bootstrap_form_for gem. I made some change that messed with the formatting of the form fields, but more importantly, when I submit the Sign Up form to create a new User, the information is showing up in the URL and looks like this: EDIT: This is happening in the latest versions of Chrome and Firefox http://localhost:3000/?utf8=%E2%9C%93&authenticity_token=UaKG5Y8fuPul2Klx7e2LtdPLTRepBxDM3Zdy8S%2F52W4%3D&user%5Bemail%5D=kevinc%40example.com&user%5Bpassword%5D=testing&user%5Bpassword_confirmation%5D=testing&commit=Sign+Up Here is the code for the form: <div class="span7"> <h3 class="center" id="more">Sign Up Now!</h3> <%= twitter_bootstrap_form_for @user do |user| %> <%= user.email_field :email, :placeholder => '[email protected]' %> <%= user.password_field :password %> <%= user.password_field :password_confirmation, 'Confirm Password' %> <%= user.actions do %> <%= user.submit 'Sign Up' %> <% end %> <% end %> </div> Here is the code for the UsersController: class UsersController < ApplicationController def new @user = User.new end def create @user = User.new(params[:user]) if @user.save redirect_to about_path, :notice => "Signed up!" else render 'new' end end end Not sure if there is more you need but if so let me know! Thank you! Edit: For debugging I tried specifying :post and also using a plain form_for <%= form_for(@user, :method => :post) do |f| %> <div class="field"> <%= f.label :email %> <%= f.email_field :email %> </div> <div class="field"> <%= f.label :password %> <%= f.password_field :password %> </div> <div class="field"> <%= f.label :password_confirmation %> <%= f.password_field :password_confirmation %> </div> <div class="actions"><%= f.submit "Sign Up" %></div> <% end %> This gives me the same problem as above. Adding routes.rb: Auth31::Application.routes.draw do get "home" => "pages#home" get "about" => "pages#about" get "contact" => "pages#contact" get "help" => "pages#help" get "login" => "sessions#new", :as => "login" get "logout" => "sessions#destroy", :as => "logout" get "signup" => "users#new", :as => "signup" root :to => "pages#home" resources :pages resources :users resources :sessions resources :password_resets end

Read the article

How To Run XP Mode in VirtualBox on Windows 7 (sort of)

- by Matthew Guay

A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin. Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox. This makes it another great way to run XP Mode if your computer does not have hardware virtualization. Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below). There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below). Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation. Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces. Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy. Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”. Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use. VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine. Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process. If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error. If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default. Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7. This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP. Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect. The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt. Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon. Now we have one final thing to install – the VirtualBox Guest Additions. In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation. When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop. In the VirtualBox window, click Machine and then select “Seamless Mode”. In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

Read the article

How To Run XP Mode in VirtualBox on Windows 7 (sort of)

- by Matthew Guay

A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin. Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox. This makes it another great way to run XP Mode if your computer does not have hardware virtualization. Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below). There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below). Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation. Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces. Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy. Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”. Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use. VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine. Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process. If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error. If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default. Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7. This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP. Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect. The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt. Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon. Now we have one final thing to install – the VirtualBox Guest Additions. In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation. When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop. In the VirtualBox window, click Machine and then select “Seamless Mode”. In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

Read the article

CodePlex Daily Summary for Thursday, February 25, 2010

CodePlex Daily Summary for Thursday, February 25, 2010New ProjectsAptusSoftware.Threading: AptusSoftware.Threading is a class library designed primarily to assist in the development of multi-threaded WinForm applications, although there i...AxiomGameDesigner: It is going to be a universal scene editor for Axiom 3D game engine. It is in pure C# and will be kept portable to MONO for compatibility with linu...Badger - Unity Productivity Extensions: A set of Microsoft Unity Extensions. Why Badger? Because I love badgers.Business & System Analysis Templates and Best Practices for Russian: http://saway.codeplex.com/Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in...FastCode: .NET 3.5 Extensions set to increase coding speed.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cro...Icelandic Online Banking: Icelandic Online Banking is project defining a web service interface for online banking.IE8 AddOns XML Creator: Application that helps on creating the xml files for IE8 Accelerators, Search Providers and the markup for Web Slices.iKnowledge: a asp.net mvc demoLearn ASP.NET MVC: Learn ASP.NET MVC is a project for the members of the Peer Learning group in Silicon Valley. It contains the SportsStore solution from the Pro ASP...Live at Education Meta Web-Service: Live at Education Meta Web-Service is intended to abstract from several technologies that are included in Live@edu set of services. This web-ser...Low level wave sound output for VB.NET: Low level sound output class for VB.NET using platform invocation services to call winmm.dllMailQ: MailQ makes it easier for developers to send mail messages from an application. The system sends mails based on a database queue system (store, se...Managed DXGI: Managed DXGI library is Fully managed wrapper writen on C# for DXGI 1.0 and 1.1 technology. It makes easier to support DXGI in managed application....Multivalue AutoComplete WinForms TextBox in C#: This project is a sample application that demonstrates how to create a multivalue WinForms textbox in C# using .NET Framework 3.5.Nifty CSharp Tools: Nifty CSharp Tools, will contain various tools and snippets. IRCBot, splashscreens, linq, world of warcraft log parsing, screenshot uploaders, twi...PHP MPQ: A port of StormLib to PHP for handling Blizzard MPQ files.RedDevils strategy - Project Hoshimi Programming Battle: Source Code of RedDevils strategy. Imagine Cup 2008 - Project Hoshimi Programming Battle.RNUNIT: rNunit is a distributed Nunit project. Many application these days are client-server application, distributed application and regular unit testing ...Samar Solution: Samar Solutions is a business system for office automation.Silverlight OOMRPG Game Engine: Silverlight OOMRPG Game EngineSimulator: GPSSimulatorSLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit is a flexible Augmented Reality library for Silverlight with the aim to make real time Augmented Reality applications with Silverlight ...Spiral Architecture Driven Development (SADD) for Russian: Это русская версия сайта sadd.codeplex.comSQLSnapshotManager: Easily manage SQL Server database snapshots in a easy to use visual interface.Twilio with VB.NET MVC: Twilio with VB.NET MVC is a sample application for developing with Twilio's REST based telephony API. It includes an XML Schema of the TwiML respon...Ultra Speed Dial: UltraSpeedDial.com - Online Speed Dial Page.Visual HTML Editor justHTML: justHTML - is simle windows-application WYSIWYG editor that allow everyone - without any knowledge of HTML - to create and edit web-pages. It supp...WinMTR.NET: .NET Clone of the popular Windows clone of the popular Linux Matt's TracerouteWPF Dialogs: "WPF Dialogs" is a library for different Dialogs in WPF (e.g. FolderBrowseDialog, SaveFileDialog, OpenFileDialog etc.). These Dialogs are written i...WPFLogin: A small Login window in WPF and C#XNA PerformanceTimers: CPU Timers for Windows and Xbox360. Can track multiple threads, and presents output as a log on-screen.New ReleasesAptusSoftware.Threading: 2.0.0: First public release. This release is in production as part of several commercial applications and is stable. The source code download includes a...BizTalk Software Factory: BizTalk Software Factory v2.1: This is a service release for the BizTalk Software Factory for BizTalk Server 2009, containing so far: Fix for x64: the SN.EXE tool is now locate...Business & System Analysis Templates and Best Practices for Russian: R00 The Place reserver: Just to reserve the place Will be filled out soonChronos WPF: Chronos v1.0 Beta 2: Added a new SplashScreen Added a new Login View and implemented Log Off Added a new PasswordBoxHelper (http://www.codeproject.com/Articles/371...dotNetTips: dotNetTips.Utility 3.5 R2: This is a new release (version 3.5.0.3) compatible with .NET 3.5. Lots of new classes/features!! Requires SP1 if using the Entity Framework extensi...fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 beta 3: The third and final beta of fleXdoc. fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclien...FluentPS: FluentPS v1.0: - FluentPS is moved from ASMX to WCF interface of the Project Server Interface (PSI) - Impersonation changes to work in compliance with WCF interfa...FolderSize: FolderSize.Win32.1.0.4.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...iTuner - The iTunes Companion: iTuner 1.1.3707 Beta 3: As promised, the iTuner Automated Librarian is now available. This automatically cleans an entire album of dead tracks and duplicates as tracks ar...Live at Education Meta Web-Service: LAEMWS v 1.0 beta: Release Candidate for LAEMWS.Macaw Reusable Code Library: LanguageConfigurationSolution: This Solution helps developing a multi language publishing web siteManaged DXGI: Initial Release.: Base declaration of interfaces, most of them untested yet.Math.NET Numerics: 2010.2.24.667 Build: Latest alpha buildMiniTwitter: 1.08.1: MiniTwitter 1.08.1 更新内容変更インクリメンタル検索時には大文字小文字の区別をしないように変更クライアント名の表示を本家にあわせて from から via に変更修正公式 RT 時にステータスが上に表示されたり二重に表示されるバグを修正自分が自分へ返信...Multivalue AutoComplete WinForms TextBox in C#: 1.0 First public release: Multivalue autocomplete textbox control and host application in this release are released in a single Visual Studio 2008 projects. See my related b...NMock3: NMock3 - Beta3, .NET 3.5: This release has some exciting new features. Please start providing feedback on the tutorials. The first several are complete and the rest are no...nxAjax - an asp.net ajax library using jQuery: nxAjax v3 codeplex 7: nxAjax v3 codeplex 7 binary and test website. Bug Fixed: ajax:Form control Add: Drag and drop Rewritten: DragnDropManager DragPanel DropPan...Office Apps: 0.8.7: whats new? Document.Editor and Document.Viewer now supports FlowDocument (.xaml) files bug fix'sPDF Rider: PDF Rider 0.3: Application PrerequisitesMicrosoft Windows Operating Systems (XP (tested) - Vista - 7) Microsoft .NET Framework 3.5 runtime A PDF rendering sof...ShellLight: ShellLight 0.1.0.1 Src: Codeplex project released. This is only a preview of the product. Until the first final release there will be many improvements.Silverlight OOMRPG Game Engine: SilverlightGameTutorialSolution v1.01: Please visit my blog for Silverlight OOMROG Game Tutorial: http://www.cnblogs.com/Jax/archive/2010/02/24/1673053.html.Simple Savant: Simple Savant v0.4: Added support for full-text indexing (See Full-Text Indexing) Added support for attribute spanning and compression for property values larger tha...Spiral Architecture Driven Development (SADD) for Russian: R00: R00 to reserve site nameTeamReview - TFS Code Review: Release 1.1.3: Release Features New expanded product positioning for capturing any targeted coding work as a trackable, assignable, reportable Work Item for any r...Text Designer Outline Text Library: 10th minor release: Version 0.3.1 (10th minor release)Fixed the gradient brush being too big for the text, resulting in not much gradient shown in the text. Gradient...TFS Workflow Control: TeamExplorer and TSWA control 1.0 for TFS 2010 RC: This is a special version for TFS 2010 RC. Use the RC version of the power tools to modify the layout of your work items (http://visualstudiogaller...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.7) - VS2010 RC Support: This update adds support for Visual Studio 2010 RC in addition to Visual Studio 2008. Please note that Visual Studio 2010 Beta 2 is NOT supported a...Tumblen3: tumblen3 Version 25Feb2010: ready for Twitter's xAuthUMD文本编辑器: UMDEditor文本编辑器V2.1.0: 2.1.0 (2010-02-24) 增加查找章节内指定文本内容的功能 2.0.4 (2010-02-06) 章节内容框增加右键菜单，包含编辑文本的基本操作 ------------------------------------------------------- 执行 reg.bat ...VCC: Latest build, v2.1.30224.0: Automatic drop of latest buildVisual HTML Editor justHTML: Latest binary: Latest buid here. Executable and mshtml.dll included in this archive. Ready to use ;)Visual HTML Editor justHTML: Source code for version 2.5: Visual studio 2008 project with full source code.VOB2MKV: vob2mkv-1.0.2: The release vob2mkv-1.0.2 is a feature update of the VOB2MKV project. It now includes a DirectShow source filter, MKVSOURCE. A source filter allo...WinMTR.NET: V 1.0: V 1.0WPF Dialogs: Version 0.1.0: Version 0.1.0 FolderBrowseDialog is implementet for more information look here Version 0.1.0 (german: Version 0.1.0 - Deutsch).WPF Dialogs: Version 0.1.1: Version 0.1.1 Features FolderBrowseDialog was extended / FolderBrowseDialog - Deutsch wurde erweitertXNA PerformanceTimers: XNA PerformanceTimers 0.1: Initial release.Zeta Resource Editor: Release 2010-02-24: Added HTTP proxy server support.Most Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesOxiteMost Active ProjectsDinnerNow.netBlogEngine.NETRawrInfoServiceSLARToolkit - Silverlight Augmented Reality ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web ServicesRapid Entity Framework. (ORM). CTP 2Common Context Adapters

Search Results

Search found 2992 results on 120 pages for 'blender 3d'.

Page 114/120 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 | Next Page >

- by Renjith G

- by MadHatter

- by Kyle Brandt

- by Kyle Brandt

- by Jim Greenleaf

- by Jeremy

- by Dexter

- by Scott

- by wnoveno

- by Rob

- by phineas

- by John

- by Napseis

- by behrk2

- by n2liquid

- by Julian Vogels

- by S1.Mac

- by Zeta Op

- by user427902

- by DeadMG

- by DaClown

- by kcurtin

- by Matthew Guay

- by Matthew Guay

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 | Next Page >