Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 114/1834 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• Cannot connect to my VPN Server from another network

  - by SantaC

  ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

  Read the article

• Network connection on Linux

  - by Kevin

  A general question about network connection on Linux : once a network connection goes into time_wait, is it still tied to the process ? Does it still use resources like say filehandle ? Reason I ask is because once it goes into time_wait, lsof does not report it anymore. I guess that means that the network connection is no longer tied to the process and hence does not count against filehandle limit. Would like to confirm though.

  Read the article

• Stream computer screen to TV via network instead of a USB wireless link

  - by user24559

  I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Why would my network slow down?

  - by monkthemighty

  The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

  Read the article

• Disable "No Internet Access" warning on Windows 7

  - by Grhm

  I have a number of Windows 7 machines on an isolated development network. There is no internet access from this network. Winodws 7 displays a yellow warning triangle on the network connection icon with a warning "No Internet Access". Is there anyway to disable this warning - I know the internet is inaccessable and always will be.

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

• Need solution for Network/Servers.

  - by rehanplus

  Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

  Read the article

• Unidentified network in Win7

  - by gylns

  I connect the internet through Ad-hoc network, My machine uses win7 and another uses winows xp, There's no problem when I connect the XP machine, but if i disconnect and reconnect the net, then my local network is marked as "Unidentified network",unless restart the XP machine, I don't know why?

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• Windows 7: Shared folder over wifi working for ONLY "Guests"

  - by James_Smith

  Hi, I have a desktop and a laptop connected to same wifi router. Desktop is connected with wire and laptop with wifi. Both the system runs windows 7 and are on the same workgroup. I have shared some folders on desktop and can view the shared folder list on laptop under "network places". But when I try to open a folder, a prompt appears for username and password. When I enter BOTH username and password, It does not authenticate when I enter ONLY username, I get:- "Windows cannot access \WIn71\Setups you do not have permission to access ..." Now to get around this message I have to give access to "Guests" group on my desktop shared folder. Cant seem to figure out why It cant authenticate username with password. And giving access to "Guests" does not sounds safe!

  Read the article

• Lost network on ubuntu server

  - by user1838473

  I have a virtual machine on Vsphere 5.0 running Ubuntu 12.04 when i put dinamic IP (/etc/network/interfaces) iface eth0 inet dhcp Ubuntu have network and i can do ping to google for example (8.8.8.8) but when i put static IP and configure resolv.conf My interfaces file: auto eth0 iface eth0 inet static address 192.168.1.54 gateway 192.168.1.1 netmask 255.255.255.0 it lost the network and i cant do ping to anything...i dont understand where is the problem... Thanks a lot

  Read the article

• Colliding network addresses

  - by joepd

  A customer is using the same address space as the company network. I need to connect with Cisco VPN Client to the network of the customer, without affecting local connectivity. To keep all working, I connect from a VM to avoid network addressing collisions. This works, but I'm looking for a way to get rid of the VM. Is it possible to connect with Cisco VPN Client 4.8 from Windows 7, without changing the 'normal' routing? How to tell specific applications (most importantly: Putty, VNC, mstsc, psql) to resolve their routes to the VPN instead of the default network interface? Have been hearing about SOCKS-proxies, is that something that could be made to work? I fear that this is a a bit of a crude question, but I'd be happy to specify more details/context.

  Read the article

• Should I manage authentication on my own if the alternative is very low in usability and I am already managing roles?

  - by rumtscho

  As a small in-house dev department, we only have experience with developing applications for our intranet. We use the existing Active Directory for user account management. It contains the accounts of all company employees and many (but not all) of the business partners we have a cooperation with. Now, the top management wants a technology exchange application, and I am the lead dev on the new project. Basically, it is a database containing our know-how, with a web frontend. Our employees, our cooperating business partners, and people who wish to become our cooperating business partners should have access to it and see what technologies we have, so they can trade for them with the department which owns them. The technologies are not patented, but very valuable to competitors, so the department bosses are paranoid about somebody unauthorized gaining access to their technology description. This constraint necessitates a nightmarishly complicated multi-dimensional RBAC-hybrid model. As the Active Directory doesn't even contain all the information needed to infer the roles I use, I will have to manage roles plus per-technology per-user granted access exceptions within my system. The current plan is to use Active Directory for authentication. This will result in a multi-hour registration process for our business partners where the database owner has to manually create logins in our Active Directory and send them credentials. If I manage the logins in my own system, we could improve the usability a lot, for example by letting people have an active (but unprivileged) account as soon as they register. It seems to me that, after I am having a users table in the DB anyway (and managing ugly details like storing historical user IDs so that recycled user IDs within the Active Directory don't unexpectedly get rights to view someone's technologies), the additional complexity from implementing authentication functionality will be minimal. Therefore, I am starting to lean towards doing my own user login management and forgetting the AD altogether. On the other hand, I see some reasons to stay with Active Directory. First, the conventional wisdom I have heard from experienced programmers is to not do your own user management if you can avoid it. Second, we have code I can reuse for connection to the active directory, while I would have to code the authentication if done in-system (and my boss has clearly stated that getting the project delivered on time has much higher priority than delivering a system with high usability). Third, I am not a very experienced developer (this is my first lead position) and have never done user management before, so I am afraid that I am overlooking some important reasons to use the AD, or that I am underestimating the amount of work left to do my own authentication. I would like to know if there are more reasons to go with the AD authentication mechanism. Specifically, if I want to do my own authentication, what would I have to implement besides a secure connection for the login screen (which I would need anyway even if I am only transporting the pw to the AD), lookup of a password hash and a mechanism for password recovery (which will probably include manual identity verification, so no need for complex mTAN-like solutions)? And, if you have experience with such security-critical systems, which one would you use and why?

  Read the article

• Why does my MySQL remote-connection fail (VLAN)?

  - by Johannes Nielsen

  ubuntu-community! Again I have a problem with my special friend MySQL :D I have got two servers - a database-server and a web-server - who are connected via VLAN. Now I want the web-server to have remote access to the database-server's MySQL. So I created the user user in mysql.user. user's Host is xxx.yyy.zzz.9 which is the internal IP-address of the web-server. xxx.yyy.zzz.0 is the network. I also created user with Host % . As long as I use MySQL on the database-server logging in as user, everything works fine. But trying to log in as user from xxx.yyy.zzz.9 using mysql -h xxx.yyy.zzz.8 -u user -p (where xxx.yyy.zzz.8 is the database-server's internal IP), I get ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.yyy.zzz.8' (110) So I tried to activate Bind-Address in the my.cnf file. Well, if I use xxx.yyy.zzz.8, nothing changes. But if I try xxx.yyy.zzz.9 and try to restart MySQL, I get mysql stop/waiting start: Job failed to start I checked the log files and found - nothing. The database-server's MySQL doesn't even register, that the web-server tries to connect remotely. My idea is, that maybe I didn't configure the VLAN properley, even though I asked someone who actually knows such stuff and he told me, I did everything right. What I wrote into /etc/networking/interfaces is: #The VLAN auto eth1 iface eth1 inet static address xxx.yyy.zzz..8 netmask 255.255.255.0 network xxx.yyy.zzz.0 broadcast xxx.yyy.zzz.255 mtu 1500 ifconfig returns eth1 Link encap:Ethernet HWaddr xxxxxxxxxxxxxx inet addr:xxx.yyy.zzz.8 Bcast:xxx.yyy.zzz.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxxxxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:241146 errors:0 dropped:0 overruns:0 frame:0 TX packets:9765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17825995 (17.8 MB) TX bytes:566602 (566.6 KB) Memory:fb900000-fb920000 for the eth1, what is, what I configured. (This is for the database-server, the web-server looks similar). ethtool eth1 returns: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000003 (3) drv probe Link detected: yes (This is for the database-server, the web-server looks similar). Actually I think, everything is right, but it still doesn't work. Is there someone with an idea? EDIT: I commented ou Bind-Address in my.cnf after it didn't work.

  Read the article

• Hostapd - WLAN as AP

  - by BBK

  I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

  Read the article

• UPMC Picks Oracle Identity Management

  - by Naresh Persaud

  UPMC, a $10-billion integrated global health enterprise, has selected Oracle as a key technology partner in UPMC’s $100-million analytics initiative designed to help “unlock the secrets of human health and disease” by consolidating and analyzing data from 200 separate sources across UPMC’s far-flung network.As part of the project UPMC also selected Oracle Identity Management to secure the interaction and insure regulatory compliance. Read complete article here. As healthcare organizations create new services on-line to provide better care Identity Management can provide a foundation for collaboration.

  Read the article

• Remote Desktop from a ubuntu 13.04 to an Ubuntu 13.04 machine so the user on the second machine can see my movments

  - by user163169

  I would like to remote desktop/VPN from an Ubuntu 13.04 computer (a) to an Ubuntu 13.04 computer(b) so the user(s) on the second machine can see my movements. I would like something a lot like team-viewer or Join.me but these machines do not have Internet but that are attached on a local network and I can VPN to them but that can not see what I am doing and I need them to be able to see my movements.

  Read the article

• Oracle Internet Directory 11.1.1.4 Certified with E-Business Suite

  - by Steven Chan

  Oracle E-Business Suite comes with native user authentication and management capabilities out-of-the-box. If you need more-advanced features, it's also possible to integrate it with Oracle Internet Directory and Oracle Single Sign-On or Oracle Access Manager, which allows you to link the E-Business Suite with third-party tools like Microsoft Active Directory, Windows Kerberos, and CA Netegrity SiteMinder.  For details about third-party integration architectures, see either of these article for EBS 11i and 12:In-Depth: Using Third-Party Identity Managers with E-Business Suite Release 12In-Depth: Using Third-Party Identity Managers with the E-Business Suite Release 11iOracle Internet Directory 11.1.1.4 is now certified with Oracle E-Business Suite Release 11i, 12.0 and 12.1.  OID 11.1.1.4 is part of Oracle Fusion Middleware 11g Release 1 Version 11.1.1.4.0, also known as FMW 11g Patchset 3.  Certified E-Business Suite releases are:EBS Release 11i 11.5.10.2 + ATG RUP 7 and higherEBS Release 12.0.6 and higherEBS Release 12.1.1 and higherOracle Internet Directory 11.1.1.3.0 can be integrated with two single sign-on solutions for EBS environments:With Oracle Single Sign-On Server 10g (10.1.4.3.0) with an existing Oracle E-Business Suite system (Release 11i, 12.0.x or 12.1.1) With Oracle Access Manager 10g (10.1.4.3) with an existing Oracle E-Business Suite system (Release 11i or 12.1.x)

  Read the article

• Redirect network logs from syslog to another file

  - by w0rldart

  I keep logging way to much info (not needed, for now) in my syslog, and not daily or hourly... but instant. If I want to watch for something in my syslog I just can't because the network log keeps interfering. So, how can I redirect network logs to another file and/or stop logging it? Dec 10 17:01:33 user kernel: [ 8716.000587] MediaState is connected Dec 10 17:01:33 user kernel: [ 8716.000599] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:33 user kernel: [ 8716.000601] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:33 user kernel: [ 8716.000612] rt28xx_get_wireless_stats ---> Dec 10 17:01:33 user kernel: [ 8716.000615] <--- rt28xx_get_wireless_stats Dec 10 17:01:39 user kernel: [ 8722.000714] MediaState is connected Dec 10 17:01:39 user kernel: [ 8722.000729] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:39 user kernel: [ 8722.000732] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:39 user kernel: [ 8722.000747] rt28xx_get_wireless_stats ---> Dec 10 17:01:39 user kernel: [ 8722.000751] <--- rt28xx_get_wireless_stats Dec 10 17:01:44 user kernel: [ 8726.904025] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:01:45 user kernel: [ 8728.003138] MediaState is connected Dec 10 17:01:45 user kernel: [ 8728.003153] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:45 user kernel: [ 8728.003157] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:45 user kernel: [ 8728.003171] rt28xx_get_wireless_stats ---> Dec 10 17:01:45 user kernel: [ 8728.003175] <--- rt28xx_get_wireless_stats Dec 10 17:01:51 user kernel: [ 8734.004066] MediaState is connected Dec 10 17:01:51 user kernel: [ 8734.004079] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:51 user kernel: [ 8734.004082] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:51 user kernel: [ 8734.004096] rt28xx_get_wireless_stats ---> Dec 10 17:01:51 user kernel: [ 8734.004099] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.004108] MediaState is connected Dec 10 17:01:57 user kernel: [ 8740.004119] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:57 user kernel: [ 8740.004121] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:57 user kernel: [ 8740.004132] rt28xx_get_wireless_stats ---> Dec 10 17:01:57 user kernel: [ 8740.004135] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.436021] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:03 user kernel: [ 8746.005280] MediaState is connected Dec 10 17:02:03 user kernel: [ 8746.005294] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:03 user kernel: [ 8746.005298] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:03 user kernel: [ 8746.005312] rt28xx_get_wireless_stats ---> Dec 10 17:02:03 user kernel: [ 8746.005315] <--- rt28xx_get_wireless_stats Dec 10 17:02:09 user kernel: [ 8752.004790] MediaState is connected Dec 10 17:02:09 user kernel: [ 8752.004804] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:09 user kernel: [ 8752.004808] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:09 user kernel: [ 8752.004821] rt28xx_get_wireless_stats ---> Dec 10 17:02:09 user kernel: [ 8752.004825] <--- rt28xx_get_wireless_stats Dec 10 17:02:15 user kernel: [ 8757.984031] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:15 user kernel: [ 8758.004078] MediaState is connected Dec 10 17:02:15 user kernel: [ 8758.004094] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:15 user kernel: [ 8758.004097] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:15 user kernel: [ 8758.004112] rt28xx_get_wireless_stats ---> Dec 10 17:02:15 user kernel: [ 8758.004116] <--- rt28xx_get_wireless_stats Dec 10 17:02:16 user kernel: [ 8759.492017] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:19 user kernel: [ 8762.002179] SCANNING, suspend MSDU transmission ... Dec 10 17:02:19 user kernel: [ 8762.004291] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:19 user kernel: [ 8762.025055] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:19 user kernel: [ 8762.027249] RT35xx: SwitchChannel#1(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.170206] RT35xx: SwitchChannel#2(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.318211] RT35xx: SwitchChannel#3(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.462269] RT35xx: SwitchChannel#4(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.606229] RT35xx: SwitchChannel#5(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.750202] RT35xx: SwitchChannel#6(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x07, R=0x02 Dec 10 17:02:20 user kernel: [ 8762.894217] RT35xx: SwitchChannel#7(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.038202] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.040194] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.040199] BAR(1) : Tid (0) - 03a3:037e Dec 10 17:02:20 user kernel: [ 8763.040387] SYNC - End of SCAN, restore to channel 11, Total BSS[03] Dec 10 17:02:20 user kernel: [ 8763.040400] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:20 user kernel: [ 8763.040402] bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~ Dec 10 17:02:20 user kernel: [ 8763.040405] SCAN done, resume MSDU transmission ... Dec 10 17:02:20 user kernel: [ 8763.047022] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.047026] BAR(1) : Tid (0) - 03a3:03a5 Dec 10 17:02:21 user kernel: [ 8763.898130] bImprovedScan ............. Resume for bImprovedScan, SCAN_PENDING .............. Dec 10 17:02:21 user kernel: [ 8763.898143] SCANNING, suspend MSDU transmission ... Dec 10 17:02:21 user kernel: [ 8763.900245] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:21 user kernel: [ 8763.921144] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:21 user kernel: [ 8763.923339] RT35xx: SwitchChannel#8(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8763.996019] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:21 user kernel: [ 8764.066221] RT35xx: SwitchChannel#9(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.210212] RT35xx: SwitchChannel#10(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.215536] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.215542] BAR(1) : Tid (0) - 0457:0452 Dec 10 17:02:21 user kernel: [ 8764.244000] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.244004] BAR(1) : Tid (0) - 0459:0456 Dec 10 17:02:21 user kernel: [ 8764.253019] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.253023] BAR(1) : Tid (0) - 045c:0458 Dec 10 17:02:21 user kernel: [ 8764.256677] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.256681] BAR(1) : Tid (0) - 045c:045b Dec 10 17:02:21 user kernel: [ 8764.259785] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.259788] BAR(1) : Tid (0) - 045d:045b Dec 10 17:02:21 user kernel: [ 8764.280467] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.280471] BAR(1) : Tid (0) - 045f:045c Dec 10 17:02:21 user kernel: [ 8764.282189] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.282192] BAR(1) : Tid (0) - 045f:045e Dec 10 17:02:21 user kernel: [ 8764.354204] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.356408] ScanNextChannel():Send PWA NullData frame to notify the associated AP! Dec 10 17:02:21 user kernel: [ 8764.498202] RT35xx: SwitchChannel#12(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.642210] RT35xx: SwitchChannel#13(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF7, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.790229] RT35xx: SwitchChannel#14(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF8, K=0x04, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.934238] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.935243] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.935249] BAR(1) : Tid (0) - 048e:0485 Dec 10 17:02:22 user kernel: [ 8764.936423] SYNC - End of SCAN, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.936436] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:22 user kernel: [ 8764.936440] SCAN done, resume MSDU transmission ... Dec 10 17:02:22 user kernel: [ 8764.940529] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.942178] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.942182] BAR(1) : Tid (0) - 0493:048e Dec 10 17:02:22 user kernel: [ 8764.942715] CNTL - All roaming failed, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.948016] MMCHK - No BEACON. restore R66 to the low bound(56) Dec 10 17:02:22 user kernel: [ 8764.948307] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 1111 Dec 10 17:02:23 user kernel: [ 8766.048073] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:23 user kernel: [ 8766.552034] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:27 user kernel: [ 8770.001180] MediaState is connected Dec 10 17:02:27 user kernel: [ 8770.001197] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:27 user kernel: [ 8770.001201] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:27 user kernel: [ 8770.001219] rt28xx_get_wireless_stats ---> Dec 10 17:02:27 user kernel: [ 8770.001223] <--- rt28xx_get_wireless_stats Dec 10 17:02:28 user kernel: [ 8771.564020] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:29 user kernel: [ 8772.064031] QuickDRS: TxTotalCnt <= 15, train back to original rate

  Read the article

• What free Remote Desktop (server) solutions are there?

  - by Tao

  I know Ubuntu comes with a "Remote Desktop" option that appears to be a straightforward VNC server, and I'm trying to understand the alternatives. Here are the possibilities I've heard about so far: VNC VNC + SSH Tunnelling NX Server, free edition FreeNX NeatX X2Go X11 Forwarding over SSH xrdp I'm coming at this from a Windows user's perspective: To the best of my experience, RDP (aka Terminal Services) is a reasonably secure (barring mitm/server spoofing), efficient desktop sharing protocol with well-supported clients, that can be exposed to the internet when necessary without major fears of intrusion. To the best of my knowledge straight VNC is none of those things, which is where I get confused - why wouldn't a better desktop sharing technology be developed or used in the open-source world? I know VNC can be wrapped with SSH, but that seems beyond the reach of a casual user. X11 forwarding over SSH may be more or less efficient, I have no idea, but is definitely even more complicated, and doesn't (as far as I know) give you access to already-running stuff (no desktop sharing as such, just remote application running). So, I'd like any feedback/preferences amongst these or any other "Free" desktop sharing options, using these criteria and/or any others: Security (esp. for access across internet) Efficiency (bandwidth usage, responsiveness, etc) Free-ness, as in Speech (not sure where RDP or FreeNX lie for this) Free-ness, as in Beer (are there any commercial solutions with usable dependable free offerings?) Ease of use (server and client side) Cross-OS Client availability Cross-OS Server availability Support for independent sessions and shared (and/or "Console") sessions Ongoing support/maintenance/development Thanks!

  Read the article

• Static objects and concurrency in a web application

  - by Ionut

  I'm developing small Java Web Applications on Tomcat server and I'm using MySQL as my database. Up until now I was using a connection singleton for accessing the database but I found out that this will ensure just on connection per Application and there will be problems if multiple users want to access the database in the same time. (They all have to make us of that single Connection object). I created a Connection Pool and I hope that this is the correct way of doing things. Furthermore it seems that I developed the bad habit of creating a lot of static object and static methods (mainly because I was under the wrong impression that every static object will be duplicated for every client which accesses my application). Because of this all the Service Classes ( classes used to handle database data) are static and distributed through a ServiceFactory: public class ServiceFactory { private static final String JDBC = "JDBC"; private static String impl; private static AccountService accountService; private static BoardService boardService; public static AccountService getAccountService(){ initConfig(); if (accountService == null){ if (impl.equalsIgnoreCase(JDBC)){ accountService = new JDBCAccountService(); } } return accountService; } public static BoardService getBoardService(){ initConfig(); if (boardService == null){ if (impl.equalsIgnoreCase(JDBC)){ boardService = new JDBCBoardService(); } } return boardService; } private static void initConfig(){ if (StringUtil.isEmpty(impl)){ impl = ConfigUtil.getProperty("service.implementation"); // If the config failed initialize with standard if (StringUtil.isEmpty(impl)){ impl = JDBC; } } } This was the factory class which, as you can see, allows just one Service to exist at any time. Now, is this a bad practice? What happens if let's say 1k users access AccountService simultaneously? I know that all this questions and bad practices come from a bad understanding of the static attribute in a web application and the way the server handles this attributes. Any help on this topic would be more than welcomed. Thank you for your time!

  Read the article

• Register for a free webcast presented by ISC2: Identity Auditing Techniques for Reducing Operational Risk and Internal Delays

  - by Darin Pendergraft

  Join us tomorrow, June 26 @ 10:00 am PST for Part 1 of a 3 part security series co-presented by ISC2 Part 1 will deal focus on Identity Auditing techniques and will be delivered by Neil Gandhi, Principal Product Manager at Oracle and Brandon Dunlap, Managing Director at Brightfly Register for Part 1: Identity Auditing Techniques for Reducing Operational Risk and Internal Delays ... Part 2 will focus on how mobile device access is changing the performance and workloads of IDM directory systems and will be delivered by Etienne Remillon, Senior Principal Product Manager at Oracle, and Brandon Dunlap, Managing Director at Brightfly Register for Part 2: Optimizing Directory Architecture for Mobile Devices and Applications ... Finally, Part 3 will focus on what you need to do to support native mobile communications and security protocols and will be presented by Sid Mishra, Senior Principal Product Manager at Oracle, and Brandon Dunlap, Managing Director at Brightfly. Register for Part 3: Using New Design Patterns to Improve Mobile Access Control Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >