Search Results

Search found 48973 results on 1959 pages for 'back end'.

Page 116/1959 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • How do I inherit abstract unit tests in Ruby?

    - by Graeme Moss
    I have two unit tests that should share a lot of common tests with slightly different setup methods. If I write something like class Abstract < Test::Unit::TestCase def setup @field = create end def test_1 ... end end class Concrete1 < Abstract def create SomeClass1.new end end class Concrete2 < Abstract def create SomeClass2.new end end then Concrete1 does not seem to inherit the tests from Abstract. Or at least I cannot get them to run in eclipse. If I choose "Run all TestCases" for the file that contains Concrete1 then Abstract is run even though I do not want it to be. If I specify Concrete1 then it does not run any tests at all! If I specify test_1 in Concrete1 then it complains it cannot find it ("uncaught throw :invalid_test (ArgumentError)"). I'm new to Ruby. What am I missing here?

    Read the article

  • Can EventMachine recognize all threads are completed?

    - by philipjkim
    I'm an EM newbie and writing two codes to compare synchronous and asynchronous IO. I'm using Ruby 1.8.7. The example for sync IO is: def pause_then_print(str) sleep 2 puts str end 5.times { |i| pause_then_print(i) } puts "Done" This works as expected, taking 10+ seconds until termination. On the other hand, the example for async IO is: require 'rubygems' require 'eventmachine' def pause_then_print(str) Thread.new do EM.run do sleep 2 puts str end end end EventMachine.run do EM.add_timer(2.5) do puts "Done" EM.stop_event_loop end EM.defer(proc do 5.times { |i| pause_then_print(i) } end) end 5 numbers are shown in 2.x seconds. Now I explicitly wrote code that EM event loop to be stopped after 2.5 seconds. But what I want is that the program terminates right after printing out 5 numbers. For doing that, I think EventMachine should recognize all 5 threads are done, and then stop the event loop. How can I do that? Also, please correct the async IO example if it can be more natural and expressive. Thanks in advance.

    Read the article

  • API Message Localization

    - by Jesse Taber
    In my post, “Keep Localizable Strings Close To Your Users” I talked about the internationalization and localization difficulties that can arise when you sprinkle static localizable strings throughout the different logical layers of an application. The main point of that post is that you should have your localizable strings reside as close to the user-facing modules of your application as possible. For example, if you’re developing an ASP .NET web forms application all of the localizable strings should be kept in .resx files that are associated with the .aspx views of the application. In this post I want to talk about how this same concept can be applied when designing and developing APIs. An API Facilitates Machine-to-Machine Interaction You can typically think about a web, desktop, or mobile application as a collection “views” or “screens” through which users interact with the underlying logic and data. The application can be designed based on the assumption that there will be a human being on the other end of the screen working the controls. You are designing a machine-to-person interaction and the application should be built in a way that facilitates the user’s clear understanding of what is going on. Dates should be be formatted in a way that the user will be familiar with, messages should be presented in the user’s preferred language, etc. When building an API, however, there are no screens and you can’t make assumptions about who or what is on the other end of each call. An API is, by definition, a machine-to-machine interaction. A machine-to-machine interaction should be built in a way that facilitates a clear and unambiguous understanding of what is going on. Dates and numbers should be formatted in predictable and standard ways (e.g. ISO 8601 dates) and messages should be presented in machine-parseable formats. For example, consider an API for a time tracking system that exposes a resource for creating a new time entry. The JSON for creating a new time entry for a user might look like: 1: { 2: "userId": 4532, 3: "startDateUtc": "2012-10-22T14:01:54.98432Z", 4: "endDateUtc": "2012-10-22T11:34:45.29321Z" 5: }   Note how the parameters for start and end date are both expressed as ISO 8601 compliant dates in UTC. Using a date format like this in our API leaves little room for ambiguity. It’s also important to note that using ISO 8601 dates is a much, much saner thing than the \/Date(<milliseconds since epoch>)\/ nonsense that is sometimes used in JSON serialization. Probably the most important thing to note about the JSON snippet above is the fact that the end date comes before the start date! The API should recognize that and disallow the time entry from being created, returning an error to the caller. You might inclined to send a response that looks something like this: 1: { 2: "errors": [ {"message" : "The end date must come after the start date"}] 3: }   While this may seem like an appropriate thing to do there are a few problems with this approach: What if there is a user somewhere on the other end of the API call that doesn’t speak English?  What if the message provided here won’t fit properly within the UI of the application that made the API call? What if the verbiage of the message isn’t consistent with the rest of the application that made the API call? What if there is no user directly on the other end of the API call (e.g. this is a batch job uploading time entries once per night unattended)? The API knows nothing about the context from which the call was made. There are steps you could take to given the API some context (e.g.allow the caller to send along a language code indicating the language that the end user speaks), but that will only get you so far. As the designer of the API you could make some assumptions about how the API will be called, but if we start making assumptions we could very easily make the wrong assumptions. In this situation it’s best to make no assumptions and simply design the API in such a way that the caller has the responsibility to convey error messages in a manner that is appropriate for the context in which the error was raised. You would work around some of these problems by allowing callers to add metadata to each request describing the context from which the call is being made (e.g. accepting a ‘locale’ parameter denoting the desired language), but that will add needless clutter and complexity. It’s better to keep the API simple and push those context-specific concerns down to the caller whenever possible. For our very simple time entry example, this can be done by simply changing our error message response to look like this: 1: { 2: "errors": [ {"code": 100}] 3: }   By changing our error error from exposing a string to a numeric code that is easily parseable by another application, we’ve placed all of the responsibility for conveying the actual meaning of the error message on the caller. It’s best to have the caller be responsible for conveying this meaning because the caller understands the context much better than the API does. Now the caller can see error code 100, know that it means that the end date submitted falls before the start date and take appropriate action. Now all of the problems listed out above are non-issues because the caller can simply translate the error code of ‘100’ into the proper action and message for the current context. The numeric code representation of the error is a much better way to facilitate the machine-to-machine interaction that the API is meant to facilitate. An API Does Have Human Users While APIs should be built for machine-to-machine interaction, people still need to wire these interactions together. As a programmer building a client application that will consume the time entry API I would find it frustrating to have to go dig through the API documentation every time I encounter a new error code (assuming the documentation exists and is accurate). The numeric error code approach hurts the discoverability of the API and makes it painful to integrate with. We can help ease this pain by merging our two approaches: 1: { 2: "errors": [ {"code": 100, "message" : "The end date must come after the start date"}] 3: }   Now we have an easily parseable numeric error code for the machine-to-machine interaction that the API is meant to facilitate and a human-readable message for programmers working with the API. The human-readable message here is not intended to be viewed by end-users of the API and as such is not really a “localizable string” in my opinion. We could opt to expose a locale parameter for all API methods and store translations for all error messages, but that’s a lot of extra effort and overhead that doesn’t add a lot real value to the API. I might be a bit of an “ugly American”, but I think it’s probably fine to have the API return English messages when the target for those messages is a programmer. When resources are limited (which they always are), I’d argue that you’re better off hard-coding these messages in English and putting more effort into building more useful features, improving security, tweaking performance, etc.

    Read the article

  • How can I resolve this one application coming up with an "You don't have permission to use the application" error?

    - by morgant
    I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

    Read the article

  • How can I resolve this one application coming up with an "You don't have permission to use the application" error?

    - by morgant
    I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

    Read the article

  • While running a batch file in Windows 7 with Admin rights from a thumb drive, how can I get the file path back to the thumb drive?

    - by Jeremy DeStefano
    I have a piece of software that is being distributed to several departments for installation onto Windows 7 laptops. They install software from the thumb drive and then they have to run a script to properly configure the software. Because the script is changing registry files and program files, it requires Admin rights. When running as Admin, it drops into the System32 folder and I no longer have an easy scriptable way to access files that need to be copied from the thumb drive, simply because I don't know for sure what drive letter its going to use on the various machines. Previous installations were on Windows XP and the command window file path stayed within the script folder. I've found similar questions here and I have already tried Relative Paths, but it can't seem to find the proper folder on the thumb drive or I can't seem to find the proper way to format it.

    Read the article

  • Used HDD/ran DiskSmartView/40,000 Power-on-hours?? should i trust it w/ my data, or take it back and bitch?

    - by David Lindsay
    I just bought a used hard drive from a University Surplus Store. Decided to run DiskSmartView to make sure it wasn't ready to fail. 40,000 power-on-hours I don't know if I feel like trusting my data to something that used. I really dont know if thats unreasonably old, but when i compare it to the POH reading i get when testing my other hdds its more than 3x older (my others have 2110 hours, 6150 hours, etc.. It's a Western Digital, so that gives me a little bit of hope(WDC WD4000KD-00NAB0). I could sure use someone else's opinion here. Thanks, DAVE

    Read the article

  • Rogue program disabled access to Firefox's "Get add-ons" and "Extensions". How can I get them back?

    - by Eric
    After installing a program called "FreeFileViewer", the program disabled access to Firefox's "Get add-ons" and "Extensions" options. To make matters worse, it installed the Yahoo! toolbar that I now can't remove (because it disabled Firefox's options to do so). Please help. Any advice you can give me to restore these Firefox options would be greatly appreciated! BTW, I am running Firefox 15.0.1 on a Windows 7 machine. Thanks, in advance, for your help! -- Eric

    Read the article

  • pound: multiple domains

    - by niklassaers
    Hi guys, I've been using pound to run mydomain.dk. Now I've bought some other domains and SSL certificates that are mydomain.no, mydomain.se and mydomain.eu. My old config looked roughly like this: ListenHTTPS Address 81.19.246.120 Port 443 Cert "/usr/local/etc/pound.keys/mydomain.dk.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End At places like here I've seen that I can use HeadRequire in the Service part, but I want the Host header to go together with the Cert, ideally something like ListenHTTPS Address 81.19.246.120 Port 443 HostAndCert "mydomain.dk" "/usr/local/etc/pound.keys/mydomain.dk.pem" HostAndCert "mydomain.se" "/usr/local/etc/pound.keys/mydomain.se.pem" HostAndCert "mydomain.no" "/usr/local/etc/pound.keys/mydomain.no.pem" HostAndCert "mydomain.eu" "/usr/local/etc/pound.keys/mydomain.eu.pem" Service BackEnd Address 10.0.10.10 Port 8080 End End End Any suggestions or clues to how I can accomplish this? Cheers Nik

    Read the article

  • /usr/bin/python (Python 2.4) was deleted on CentOS 5. I compiled from source but yum is still broken. How can I get everything back to the way it was?

    - by Maxwell
    I saw a lot of other questions like this but none of them answered the exact part I am having trouble with (actually installing the Python RPM). Someone on my system deleted /usr/bin/python and /usr/bin/python2.4 on my 64 bit CentOS 5.8 installation. I recompiled Python 2.4 from source, but now whenever I try to yum install anything I get the following error: [root@cerulean-OW1 ~]# yum install httpd There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4 (#1, Dec 16 2012, 09:16:56) [GCC 4.1.2 20080704 (Red Hat 4.1.2-52)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq I checked http://wiki.linux.duke.edu/YumFaq and it said the following: If you are getting a message that yum itself is the missing module then you probably installed it incorreclty (or installed the source rpm using make/make install). If possible, find a prebuilt rpm that will work for your system like one from Fedora or CentOS. Or, you can download the srpm and do a rpmbuild --rebuild yum*.src.rpm I tried going to http://rpm.pbone.net/index.php3/stat/4/idpl/17838875/dir/centos_5/com/python-2.4.3-46.el5.x86_64.rpm.html to install Python, which resulted in the following error: [root@cerulean-OW1 ~]# rpm -Uvh python-2.4.3-46.el5.x86_64.rpm error: Failed dependencies: python-libs-x86_64 = 2.4.3-46.el5 is needed by python-2.4.3-46.el5.x86_64 So I tried installing python-libs-x86_64, which resulted in the following: [root@cerulean-OW1 ~]# rpm -Uvh python-libs-2.4.3-46.el5_8.2.x86_64.rpm warning: python-libs-2.4.3-46.el5_8.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d Preparing... ########################################### [100%] package python-libs-2.4.3-46.el5_8.2.x86_64 is already installed file /usr/lib64/libpython2.4.so.1.0 from install of python-libs-2.4.3-46.el5_8.2.x86_64 conflicts with file from package python-libs-2.4.3-46.el5_8.2.x86_64

    Read the article

  • Can I trick Carbonite into backing up an external hard drive?

    - by Brian
    I use Carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 GB), so I went out and purchased an external hard drive. However, Carbonite will not back it up. Is it possible to set up Carbonite to backup an external hard drive? I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

    Read the article

  • Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

    - by tednewk
    I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

    Read the article

  • Delphi - WndProc() in thread never called

    - by Robert Oschler
    I had code that worked fine when running in the context of the main VCL thread. This code allocated it's own WndProc() in order to handle SendMessage() calls. I am now trying to move it to a background thread because I am concerned that the SendMessage() traffic is affecting the main VCL thread adversely. So I created a worker thread with the sole purpose of allocating the WndProc() in its thread Execute() method to ensure that the WndProc() existed in the thread's execution context. The WndProc() handles the SendMessage() calls as they come in. The problem is that the worker thread's WndProc() method is never triggered. Note, doExecute() is part of a template method that is called by my TThreadExtended class which is a descendant of Delphi's TThread. TThreadExtended implements the thread Execute() method and calls doExecute() in a loop. I triple-checked and doExecute() is being called repeatedly. Also note that I call PeekMessage() right after I create the WndProc() in order to make sure that Windows creates a message queue for the thread. However something I am doing is wrong since the WndProc() method is never triggered. Here's the code below: // ========= BEGIN: CLASS - TWorkerThread ======================== constructor TWorkerThread.Create; begin FWndProcHandle := 0; inherited Create(false); end; // --------------------------------------------------------------- // This call is the thread's Execute() method. procedure TWorkerThread.doExecute; var Msg: TMsg; begin // Create the WndProc() in our thread's context. if FWndProcHandle = 0 then begin FWndProcHandle := AllocateHWND(WndProc); // Call PeekMessage() to make sure we have a window queue. PeekMessage(Msg, FWndProcHandle, 0, 0, PM_NOREMOVE); end; if Self.Terminated then begin // Get rid of the WndProc(). myDeallocateHWnd(FWndProcHandle); end; // Sleep a bit to avoid hogging the CPU. Sleep(5); end; // --------------------------------------------------------------- procedure TWorkerThread.WndProc(Var Msg: TMessage); begin // THIS CODE IS NEVER CALLED. try if Msg.Msg = WM_COPYDATA then begin // Is LParam assigned? if (Msg.LParam > 0) then begin // Yes. Treat it as a copy data structure. with PCopyDataStruct(Msg.LParam)^ do begin ... // Here is where I do my work. end; end; // if Assigned(Msg.LParam) then end; // if Msg.Msg = WM_COPYDATA then finally Msg.Result := 1; end; // try() end; // --------------------------------------------------------------- procedure TWorkerThread.myDeallocateHWnd(Wnd: HWND); var Instance: Pointer; begin Instance := Pointer(GetWindowLong(Wnd, GWL_WNDPROC)); if Instance <> @DefWindowProc then begin // Restore the default windows procedure before freeing memory. SetWindowLong(Wnd, GWL_WNDPROC, Longint(@DefWindowProc)); FreeObjectInstance(Instance); end; DestroyWindow(Wnd); end; // --------------------------------------------------------------- // ========= END : CLASS - TWorkerThread ======================== Thanks, Robert

    Read the article

  • issue with std::advance on std::sets

    - by tim
    I've stumbled upon what I believe is a bug in the stl algorithm advance. When I'm advancing the iterator off of the end of the container, I get inconsistent results. Sometimes I get container.end(), sometimes I get the last element. I've illustrated this with the following code: #include <algorithm> #include <cstdio> #include <set> using namespace std; typedef set<int> tMap; int main(int argc, char** argv) { tMap::iterator i; tMap the_map; for (int i=0; i<10; i++) the_map.insert(i); #if EXPERIMENT==1 i = the_map.begin(); #elif EXPERIMENT==2 i = the_map.find(4); #elif EXPERIMENT==3 i = the_map.find(5); #elif EXPERIMENT==4 i = the_map.find(6); #elif EXPERIMENT==5 i = the_map.find(9); #elif EXPERIMENT==6 i = the_map.find(2000); #else i = the_map.end(); #endif advance(i, 100); if (i == the_map.end()) printf("the end\n"); else printf("wuh? %d\n", *i); return 0; } Which I get the following unexpected (according to me) behavior in experiment 3 and 5 where I get the last element instead of the_map.end(). [tim@saturn advance]$ uname -srvmpio Linux 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:37:32 EDT 2006 i686 athlon i386 GNU/Linux [tim@saturn advance]$ g++ --version g++ (GCC) 4.1.1 20061011 (Red Hat 4.1.1-30) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. [tim@saturn advance]$ g++ -DEXPERIMENT=1 advance.cc [tim@saturn advance]$ ./a.out the end [tim@saturn advance]$ g++ -DEXPERIMENT=2 advance.cc [tim@saturn advance]$ ./a.out the end [tim@saturn advance]$ g++ -DEXPERIMENT=3 advance.cc [tim@saturn advance]$ ./a.out wuh? 9 [tim@saturn advance]$ g++ -DEXPERIMENT=4 advance.cc [tim@saturn advance]$ ./a.out the end [tim@saturn advance]$ g++ -DEXPERIMENT=5 advance.cc [tim@saturn advance]$ ./a.out wuh? 9 [tim@saturn advance]$ g++ -DEXPERIMENT=6 advance.cc [tim@saturn advance]$ ./a.out the end [tim@saturn advance]$ g++ -DEXPERIMENT=7 advance.cc [tim@saturn advance]$ ./a.out the end [tim@saturn advance]$ From the sgi website (see link at top), it has the following example: list<int> L; L.push_back(0); L.push_back(1); list<int>::iterator i = L.begin(); advance(i, 2); assert(i == L.end()); I would think that the assertion should apply to other container types, no? What am I missing? Thanks!

    Read the article

  • SQL Select syntax error

    - by Odette
    hi guys thanks for your help yesterday. I am now trying to incorporate the query from yesterday into an existing query so I can show the highest itemcode's reporting group in the existing query..but I have a syntax error somewhere at my Select statement. ERROR: Keyword SELECT not expected. I have tried putting brackets at every possible place but still no go..can you please help? (ps-this whole query has been giving me nightmares!) WITH CALC1 AS (SELECT OTQUOT, OTIT01 AS ITEMS, ROUND(OQCQ01 * OVRC01,2) AS COST FROM @[email protected] WHERE OTIT01 < '' UNION ALL SELECT OTQUOT, OTIT02 AS ITEMS, ROUND(OQCQ02 * OVRC02,2) AS COST FROM @[email protected] WHERE OTIT02 < '' UNION ALL SELECT OTQUOT, OTIT03 AS ITEMS, ROUND(OQCQ03 * OVRC03,2) AS COST FROM @[email protected] WHERE OTIT03 < '' UNION ALL SELECT OTQUOT, OTIT04 AS ITEMS, ROUND(OQCQ04 * OVRC04,2) AS COST FROM @[email protected] WHERE OTIT04 < '' UNION ALL SELECT OTQUOT, OTIT05 AS ITEMS, ROUND(OQCQ05 * OVRC05,2) AS COST FROM @[email protected] WHERE OTIT05 < '' UNION ALL SELECT OTQUOT, OTIT06 AS ITEMS, ROUND(OQCQ06 * OVRC06,2) AS COST FROM @[email protected] WHERE OTIT06 < '' UNION ALL SELECT OTQUOT, OTIT07 AS ITEMS, ROUND(OQCQ07 * OVRC07,2) AS COST FROM @[email protected] WHERE OTIT07 < '' UNION ALL SELECT OTQUOT, OTIT08 AS ITEMS, ROUND(OQCQ08 * OVRC08,2) AS COST FROM @[email protected] WHERE OTIT08 < '' UNION ALL SELECT OTQUOT, OTIT09 AS ITEMS, ROUND(OQCQ09 * OVRC09,2) AS COST FROM @[email protected] WHERE OTIT09 < '' UNION ALL SELECT OTQUOT, OTIT10 AS ITEMS, ROUND(OQCQ10 * OVRC10,2) AS COST FROM @[email protected] WHERE OTIT10 < '' ) (SELECT OTQUOT, DESC FROM ( SELECT OTQUOT, ITEMS, B.IXRPGP AS GROUP, C.OTRDSC AS DESC, COST, ROW_NUMBER() OVER (ORDER BY COST DESC) AS RN FROM CALC1 AS A INNER JOIN @[email protected] AS B ON (A.ITEMS = B.IKITMC) INNER JOIN DATAGRP.GDSGRP AS C ON (B.IXRPGP = C.OKRPGP) ) T WHERE T.RN = 1) SELECT A.OKPBRN, A.OCAREA, A.OTCCDE, A.OTCNAM, A.OTSMAN, A.OKPBRN||A.OAPNUM AS OTQUOT, A.OTONUM, A.OTCAD1, A.OTCAD2, A.OTCAD3, A.OTPCDE, A.OTDEL1, A.OTDEL2, A.OTDEL3, CHAR(DATE(CASE WHEN SUBSTR(A.ODOQDT,5,4) = '0000' THEN '0001' ELSE SUBSTR(A.ODOQDT,5,4) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,4,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,3,2) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,1,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,1,2) END), ISO) AS ODOQDT_CCYYMMDD, CHAR(DATE(CASE WHEN SUBSTR(A.ODDELD,7,2) = '' THEN '0001' ELSE '20'||SUBSTR(A.ODDELD,7,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,4,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,4,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,1,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,1,2) END), ISO) AS ODDELD_CCYYMMDD, B.DESC, A.OVQTVL FROM @[email protected] AS A INNER JOIN CALC1 AS B ON (A.OKPBRN||A.OAPNUM = B.OTQUOT) WHERE A.OKPBRN = '@OKPBRN@' AND A.OTCCDE NOT LIKE '*DEP%' AND CHAR(DATE(CASE WHEN SUBSTR(A.ODOQDT,5,4) = '0000' THEN '0001' ELSE SUBSTR (A.ODOQDT,5,4) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,4,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,3,2) END ||'-'|| CASE WHEN SUBSTR(A.ODOQDT,1,2) = '00' THEN '01' ELSE SUBSTR(A.ODOQDT,1,2) END), ISO) = CHAR(CURDATE() - 3 MONTH, ISO) AND A.OCQF01 = '0' AND A.OCQF02 = '0' AND A.OCQF04 = '0' AND A.OCQF05 = '0' AND A.OCQF06 = '0' AND A.OCQF07 = '0' AND A.OCQF08 = '0' AND A.OCQF09 = '0' AND A.OCQF10 = '1' AND A.OTCGRP LIKE 'S/%' ORDER BY A.OTSMAN ASC, A.OVQTVL DESC, CHAR(DATE(CASE WHEN SUBSTR(A.ODDELD,7,2) = '' THEN '0001' ELSE '20'||SUBSTR(A.ODDELD,7,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,4,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,4,2) END ||'-'|| CASE WHEN SUBSTR(A.ODDELD,1,2) = '' THEN '01' ELSE SUBSTR(A.ODDELD,1,2) END),ISO) ASC

    Read the article

  • Excel Macro Runtime error 428 in Excel 2003

    - by Adam
    Hi I have created a xlt excel template which works fine in Excel 2007 under compatibility mode and shows no errors on compatibility check. The template runs a number of Macros which creates pivot tables and charts. When a colleague tries to run the same xlt on excel 2003 they get a Runtime error 428 (Object does not support this property or method). The runtime error fails at this point; ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Any help would be appreciated. This is the full Macro; Sub Auto_Open() ' ' ImportData Macro ' Macro to import data, Data must be in your local D: Drive and named raw.csv ' ' Sheets("raw").Select With ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;d:\raw.csv", Destination:=Range _ ("$A$1")) .Name = "raw_1" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True .RefreshOnFileOpen = False .RefreshStyle = xlInsertDeleteCells .SavePassword = False .SaveData = True .AdjustColumnWidth = True .RefreshPeriod = 0 .TextFilePromptOnRefresh = False .TextFilePlatform = 850 .TextFileStartRow = 1 .TextFileParseType = xlDelimited .TextFileTextQualifier = xlTextQualifierDoubleQuote .TextFileConsecutiveDelimiter = False .TextFileTabDelimiter = False .TextFileSemicolonDelimiter = False .TextFileCommaDelimiter = True .TextFileSpaceDelimiter = False .TextFileColumnDataTypes = Array(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, _ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) .TextFileTrailingMinusNumbers = True .Refresh BackgroundQuery:=False End With ' ' AddMonthColumn Macro ' ' Sheets("raw").Select Range("AK1").Select ActiveCell.FormulaR1C1 = "Month" Range("AK2").FormulaR1C1 = "=DATE(YEAR(RC[-36]),MONTH(RC[-36]),1)" LastRow = ActiveSheet.UsedRange.Rows.Count Range("AK2").AutoFill Destination:=Range("AK2:AK" & LastRow) Columns("AK:AK").EntireColumn.AutoFit Columns("AK:AK").Select Selection.NumberFormat = "mmmm" With Selection .HorizontalAlignment = xlCenter End With Columns("AK:AK").EntireColumn.AutoFit Selection.Copy Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ' ' Add Report Information [Text] ' Sheets("Frontpage").Select Range("A2:N2").Select Selection.Merge ActiveCell.FormulaR1C1 = "Service Activity Report" With Selection.Font .Size = 20 End With Range("A3:N3").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Customer Name") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With Range("A4:N4").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Date Range dd/mm/yyyy - dd/mm/yyyy") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With ' ' IncidentsbyPriority Macro ' ' Sheets("Frontpage").Select Range("A7").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(7, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$7:$H$22") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable2").PivotFields("Priority") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable2").AddDataField ActiveSheet.PivotTables( _ "PivotTable2").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentsbyPriority" ActiveChart.ChartTitle.Text = "Incidents by Priority" Dim RngToCover As Range Dim ChtOb As ChartObject Set RngToCover = ActiveSheet.Range("D7:L16") Set ChtOb = ActiveSheet.ChartObjects("IncidentsbyPriority") ChtOb.Height = RngToCover.Height ' resize ChtOb.Width = RngToCover.Width ' resize ChtOb.Top = RngToCover.Top ' reposition ChtOb.Left = RngToCover.Left ' reposition ' ' IncidentbyMonth Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R18C1", TableName:="PivotTable4", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(18, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$18:$H$38") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable4").PivotFields("Month") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _ "PivotTable4").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyMonth" ActiveChart.ChartTitle.Text = "Incidents by Month" Dim RngToCover2 As Range Dim ChtOb2 As ChartObject Set RngToCover2 = ActiveSheet.Range("D18:L30") Set ChtOb2 = ActiveSheet.ChartObjects("IncidentbyMonth") ChtOb2.Height = RngToCover2.Height ' resize ChtOb2.Width = RngToCover2.Width ' resize ChtOb2.Top = RngToCover2.Top ' reposition ChtOb2.Left = RngToCover2.Left ' reposition ' ' IncidentbyCategory Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R38C1", TableName:="PivotTable6", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(38, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$38:$H$119") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 2") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 3") .Orientation = xlPageField .Position = 1 End With ActiveSheet.PivotTables("PivotTable6").AddDataField ActiveSheet.PivotTables( _ "PivotTable6").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyCategory" ActiveChart.ChartTitle.Text = "Incidents by Category" Dim RngToCover3 As Range Dim ChtOb3 As ChartObject Set RngToCover3 = ActiveSheet.Range("D38:L56") Set ChtOb3 = ActiveSheet.ChartObjects("IncidentbyCategory") ChtOb3.Height = RngToCover3.Height ' resize ChtOb3.Width = RngToCover3.Width ' resize ChtOb3.Top = RngToCover3.Top ' reposition ChtOb3.Left = RngToCover3.Left ' reposition ' ' IncidentsbySiteandPriority Macro ' ' Sheets("Frontpage").Select Range("A71").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R71C1", TableName:="PivotTable3", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(71, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$71:$H$90") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable3").PivotFields("Site Name") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable3").PivotFields("Priority") .Orientation = xlColumnField .Position = 1 End With ActiveSheet.PivotTables("PivotTable3").AddDataField ActiveSheet.PivotTables( _ "PivotTable3").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbySiteandPriority" ' ActiveChart.ChartTitle.Text = "Incidents by Site and Priority" Dim RngToCover4 As Range Dim ChtOb4 As ChartObject Set RngToCover4 = ActiveSheet.Range("H71:O91") Set ChtOb4 = ActiveSheet.ChartObjects("IncidentbySiteandPriority") ChtOb4.Height = RngToCover4.Height ' resize ChtOb4.Width = RngToCover4.Width ' resize ChtOb4.Top = RngToCover4.Top ' reposition ChtOb4.Left = RngToCover4.Left ' reposition Columns("A:G").Select Range("A52").Activate Columns("A:G").EntireColumn.AutoFit End Sub

    Read the article

  • Matlab: Optimization by perturbing variable

    - by S_H
    My main script contains following code: %# Grid and model parameters nModel=50; nModel_want=1; nI_grid1=5; Nth=1; nRow.Scale1=5; nCol.Scale1=5; nRow.Scale2=5^2; nCol.Scale2=5^2; theta = 90; % degrees a_minor = 2; % range along minor direction a_major = 5; % range along major direction sill = var(reshape(Deff_matrix_NthModel,nCell.Scale1,1)); % variance of the coarse data matrix of size nRow.Scale1 X nCol.Scale1 %# Covariance computation % Scale 1 for ihRow = 1:nRow.Scale1 for ihCol = 1:nCol.Scale1 [cov.Scale1(ihRow,ihCol),heff.Scale1(ihRow,ihCol)] = general_CovModel(theta, ihCol, ihRow, a_minor, a_major, sill, 'Exp'); end end % Scale 2 for ihRow = 1:nRow.Scale2 for ihCol = 1:nCol.Scale2 [cov.Scale2(ihRow,ihCol),heff.Scale2(ihRow,ihCol)] = general_CovModel(theta, ihCol/(nCol.Scale2/nCol.Scale1), ihRow/(nRow.Scale2/nRow.Scale1), a_minor, a_major, sill/(nRow.Scale2*nCol.Scale2), 'Exp'); end end %# Scale-up of fine scale values by averaging [covAvg.Scale2,var_covAvg.Scale2,varNorm_covAvg.Scale2] = general_AverageProperty(nRow.Scale2/nRow.Scale1,nCol.Scale2/nCol.Scale1,1,nRow.Scale1,nCol.Scale1,1,cov.Scale2,1); I am using two functions, general_CovModel() and general_AverageProperty(), in my main script which are given as following: function [cov,h_eff] = general_CovModel(theta, hx, hy, a_minor, a_major, sill, mod_type) % mod_type should be in strings angle_rad = theta*(pi/180); % theta in degrees, angle_rad in radians R_theta = [sin(angle_rad) cos(angle_rad); -cos(angle_rad) sin(angle_rad)]; h = [hx; hy]; lambda = a_minor/a_major; D_lambda = [lambda 0; 0 1]; h_2prime = D_lambda*R_theta*h; h_eff = sqrt((h_2prime(1)^2)+(h_2prime(2)^2)); if strcmp(mod_type,'Sph')==1 || strcmp(mod_type,'sph') ==1 if h_eff<=a cov = sill - sill.*(1.5*(h_eff/a_minor)-0.5*((h_eff/a_minor)^3)); else cov = sill; end elseif strcmp(mod_type,'Exp')==1 || strcmp(mod_type,'exp') ==1 cov = sill-(sill.*(1-exp(-(3*h_eff)/a_minor))); elseif strcmp(mod_type,'Gauss')==1 || strcmp(mod_type,'gauss') ==1 cov = sill-(sill.*(1-exp(-((3*h_eff)^2/(a_minor^2))))); end and function [PropertyAvg,variance_PropertyAvg,NormVariance_PropertyAvg]=... general_AverageProperty(blocksize_row,blocksize_col,blocksize_t,... nUpscaledRow,nUpscaledCol,nUpscaledT,PropertyArray,omega) % This function computes average of a property and variance of that averaged % property using power averaging PropertyAvg=zeros(nUpscaledRow,nUpscaledCol,nUpscaledT); %# Average of property for k=1:nUpscaledT, for j=1:nUpscaledCol, for i=1:nUpscaledRow, sum=0; for a=1:blocksize_row, for b=1:blocksize_col, for c=1:blocksize_t, sum=sum+(PropertyArray((i-1)*blocksize_row+a,(j-1)*blocksize_col+b,(k-1)*blocksize_t+c).^omega); % add all the property values in 'blocksize_x','blocksize_y','blocksize_t' to one variable end end end PropertyAvg(i,j,k)=(sum/(blocksize_row*blocksize_col*blocksize_t)).^(1/omega); % take average of the summed property end end end %# Variance of averageed property variance_PropertyAvg=var(reshape(PropertyAvg,... nUpscaledRow*nUpscaledCol*nUpscaledT,1),1,1); %# Normalized variance of averageed property NormVariance_PropertyAvg=variance_PropertyAvg./(var(reshape(... PropertyArray,numel(PropertyArray),1),1,1)); Question: Using Matlab, I would like to optimize covAvg.Scale2 such that it matches closely with cov.Scale1 by perturbing/varying any (or all) of the following variables 1) a_minor 2) a_major 3) theta Thanks.

    Read the article

  • VBA nested Loop flow control

    - by PCGIZMO
    I will be brief and stick to what I know. This code for the most part works as it should. The only issue is in the iteration of the x and z loop. these to loops should set the range and yLABEL for the Y loop. I can get through a set and come up with the correct range after that things go bonkers. I know some of it has to do with not breaking out of x to set z and then back to x update the range. It should work z is found then x. the range between them is set for y. then next x but y stays then rang between y and x is set for y.. so on and so forth kinda like a slinky down the stairs. or a slide rule depending on how I set the loops either way I end up all over the place after a couple iterations. I have done a few things but each time I break out of x to set z , X restarts at the top of the range. At least that's what I think I am seeing. In the example sheet i have since changed the way the way the offset works with the loop but the idea is still the same. I have goto statements at this time i was going to try figuring out conditional switches after the loops were working. Any help direction or advice is appreciated. Option Explicit Sub parse() Application.DisplayAlerts = False 'Application.EnableCancelKey = xlDisabled Dim strPath As String, strPathused As String strPath = "C:\clerk plan2" Dim objfso As FileSystemObject, objFolder As Folder, objfile As Object Set objfso = CreateObject("Scripting.FileSystemObject") Set objFolder = objfso.GetFolder(strPath) 'Loop through objWorkBooks For Each objfile In objFolder.Files If objfso.GetExtensionName(objfile.Path) = "xlsx" Then Dim objWorkbook As Workbook Set objWorkbook = Workbooks.Open(objfile.Path) ' Set path for move to at end of script strPathused = "C:\prodplan\used\" & objWorkbook.Name objWorkbook.Worksheets("inbound transfer sheet").Activate objWorkbook.Worksheets("inbound transfer sheet").Cells.UnMerge 'Range management WB Dim SRCwb As Worksheet, SRCrange1 As Range, SRCrange2 As Range, lastrow As Range Set SRCwb = objWorkbook.Worksheets("inbound transfer sheet") Set SRCrange1 = SRCwb.Range("g3:g150") Set SRCrange2 = SRCwb.Range("a1:a150") Dim DSTws As Worksheet Set DSTws = Workbooks("clerkplan2.xlsm").Worksheets("transfer") Dim STR1 As String, STR2 As String, xVAL As String, zVAL As String, xSTR As String, zSTR As String STR1 = "INBOUND TRANS" STR2 = "INBOUND CA TRANS" Dim x As Variant, z As Variant, y As Variant, zxRANGE As Range For Each z In SRCrange2 zSTR = Mid(z, 1, 16) If zSTR <> STR2 Then GoTo zNEXT If zSTR = STR2 Then zVAL = z End If For Each x In SRCrange2 xSTR = Mid(x, 1, 13) If xSTR <> STR1 Then GoTo xNEXT If xSTR = STR1 Then xVAL = x End If Dim yLABEL As String If xVAL = x And zVAL = z Then If x.Row > z.Row Then Set zxRANGE = SRCwb.Range(x.Offset(1, 0).Address & " : " & z.Offset(-1, 0).Address) yLABEL = z.Value Else Set zxRANGE = SRCwb.Range(z.Offset(-1, 0).Address & " : " & x.Offset(1, 0).Address) yLABEL = x.Value End If End If MsgBox zxRANGE.Address ' DEBUG For Each y In zxRANGE If y.Offset(0, 6) = "Temp" Or y.Offset(0, 14) = "Begin Time" Or y.Offset(0, 15) = "End Time" Or _ Len(y.Offset(0, 6)) = 0 Or Len(y.Offset(0, 14)) = 0 Or Len(y.Offset(0, 15)) = "0" Then yNEXT Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("c" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) y.Offset(0, 6).Copy lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False DSTws.Activate ActiveCell.Offset(0, -1) = objWorkbook.Name ActiveCell.Offset(0, -2) = yLABEL objWorkbook.Activate y.Offset(0, 14).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("d" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False objWorkbook.Activate y.Offset(0, 15).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("e" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False yNEXT: Next y xNEXT: Next x zNEXT: Next z strPathused = "C:\clerk plan2\used\" & objWorkbook.Name objWorkbook.Close False 'Move proccesed file to new Dir Dim OldFilePath As String Dim NewFilePath As String OldFilePath = objfile 'original file location NewFilePath = strPathused ' new file location Name OldFilePath As NewFilePath ' move the file End If Next End Sub

    Read the article

  • problem with PHP class function ()

    - by lusey
    hello this is my first question here and i hope you can help me .. I am trying to find a soloution of the towers of hanoi problem by three search ways (BFS-DFS-IDS) so I use "state" class whitch defined by 5 variables as here : class state { var $tower1 = array(); var $tower2 = array(); var $tower3 = array(); var $depth; var $neighbors = array(); and it also has many function one of them is getneighbors() which supposed to fill the array $neighbors with state neighbors and they are from the type "state" and here is the function : function getneighbors () { $temp=$this->copy(); $neighbor1= $this->copy(); $neighbor2= $this->copy(); $neighbor3= $this->copy(); $neighbor4= $this->copy(); $neighbor5= $this->copy(); $neighbor6= $this->copy(); if(!Empty($temp->tower1)) { if(!Empty($neighbor1->tower2)) { if(end($neighbor1->tower1) < end($neighbor1->tower2)) { array_unshift($neighbor1->tower2,array_pop($neighbor1->tower1)); array_push($neighbors,$neighbor1); }} else { array_unshift($neighbor1->tower2, array_pop($neighbor1->tower1)); array_push($neighbors,$neighbor1); } if(!Empty($neighbor2->tower3)) { if(end($neighbor2->tower1) < end($neighbor2->tower3)) { array_unshift($neighbor2->tower3, array_pop($neighbor2->tower1)); array_push($neighbors,$neighbor2); }} else { array_unshift($neighbor2->tower3,array_shift($neighbor2->tower1)); array_push($neighbors,$neighbor2); } } if(!Empty($temp->tower2)) { if(!Empty($neighbor3->tower1)) { if(end($neighbor3->tower2) < end($neighbor3->tower1)) { array_unshift($neighbor3->tower1,array_shift($neighbor3->tower2)); array_push($neighbors,$neighbor3); } } else { array_unshift($neighbor3->tower1,array_shift($neighbor3->tower2)); array_push($neighbors,$neighbor3); } if(!Empty($neighbor4->tower3)) { if(end($neighbor4->tower2) < end($neighbor4->tower3)) { array_unshift($neighbor4->tower1,array_shift($neighbor4->tower2)); array_push($neighbors,$neighbor4); } } else{ array_unshift($neighbor4->tower3,array_shift($neighbor4->tower2)); array_push($neighbors,$neighbor4); } } if(!Empty($temp->tower3)) { if(!Empty($neighbor5->tower1)) { if(end($neighbor5->tower3) < end($neighbor5->tower1)) {array_unshift($neighbor5->tower1,array_shift($neighbor5->tower3)); array_push($neighbors,$neighbor5); } } else{ array_unshift($neighbor5->tower1,array_shift($neighbor5->tower3)); array_push($neighbors,$neighbor5);} if(!Empty($neighbor6->tower2)) { if(end($neighbor6->tower3) < end($neighbor6->tower2)) { array_unshift($neighbor6->tower2,array_shift($neighbor6->tower3)); array_push($neighbors,$neighbor6); }} else{ array_unshift($neighbor6->tower2,array_shift($neighbor6->tower3)); array_push($neighbors,$neighbor6);} } return $neighbors; } note that toString and equals and copy are defined too now the problem is that when I call getneighbors() it returns an empty $neighbors array can you pleas tell me the problem ?

    Read the article

  • Invalid Cast Exception with Update Panel

    - by user1593175
    On Button Click Protected Sub btnSubmit_Click(sender As Object, e As System.EventArgs) Handles btnSubmit.Click MsgBox("INSIDE") If SocialAuthUser.IsLoggedIn Then Dim accountId As Integer = BLL.getAccIDFromSocialAuthSession Dim AlbumID As Integer = BLL.createAndReturnNewAlbumId(txtStoryTitle.Text.Trim, "") Dim URL As String = BLL.getAlbumPicUrl(txtStoryTitle.Text.Trim) Dim dt As New DataTable dt.Columns.Add("PictureID") dt.Columns.Add("AccountID") dt.Columns.Add("AlbumID") dt.Columns.Add("URL") dt.Columns.Add("Thumbnail") dt.Columns.Add("Description") dt.Columns.Add("AlbumCover") dt.Columns.Add("Tags") dt.Columns.Add("Votes") dt.Columns.Add("Abused") dt.Columns.Add("isActive") Dim Row As DataRow Dim uniqueFileName As String = "" If Session("ID") Is Nothing Then lblMessage.Text = "You don't seem to have uploaded any pictures." Exit Sub Else **Dim FileCount As Integer = Request.Form(Request.Form.Count - 2)** Dim FileName, TargetName As String Try Dim Path As String = Server.MapPath(BLL.getAlbumPicUrl(txtStoryTitle.Text.Trim)) If Not IO.Directory.Exists(Path) Then IO.Directory.CreateDirectory(Path) End If Dim StartIndex As Integer Dim PicCount As Integer For i As Integer = 0 To Request.Form.Count - 1 If Request.Form(i).ToLower.Contains("jpg") Or Request.Form(i).ToLower.Contains("gif") Or Request.Form(i).ToLower.Contains("png") Then StartIndex = i + 1 Exit For End If Next For i As Integer = StartIndex To Request.Form.Count - 4 Step 3 FileName = Request.Form(i) '## If part here is not kaam ka..but still using it for worst case scenario If IO.File.Exists(Path & FileName) Then TargetName = Path & FileName 'MsgBox(TargetName & "--- 1") Dim j As Integer = 1 While IO.File.Exists(TargetName) TargetName = Path & IO.Path.GetFileNameWithoutExtension(FileName) & "(" & j & ")" & IO.Path.GetExtension(FileName) j += 1 End While Else uniqueFileName = Guid.NewGuid.ToString & "__" & FileName TargetName = Path & uniqueFileName End If IO.File.Move(Server.MapPath("~/TempUploads/" & Session("ID") & "/" & FileName), TargetName) PicCount += 1 Row = dt.NewRow() Row(1) = accountId Row(2) = AlbumID Row(3) = URL & uniqueFileName Row(4) = "" Row(5) = "No Desc" Row(6) = "False" Row(7) = "" Row(8) = "0" Row(9) = "0" Row(10) = "True" dt.Rows.Add(Row) Next If BLL.insertImagesIntoAlbum(dt) Then lblMessage.Text = PicCount & IIf(PicCount = 1, " Picture", " Pictures") & " Saved!" lblMessage.ForeColor = Drawing.Color.Black Dim db As SqlDatabase = Connection.connection Using cmd As DbCommand = db.GetSqlStringCommand("SELECT PictureID,URL FROM AlbumPictures WHERE AlbumID=@AlbumID AND AccountID=@AccountID") db.AddInParameter(cmd, "AlbumID", Data.DbType.Int32, AlbumID) db.AddInParameter(cmd, "AccountID", Data.DbType.Int32, accountId) Using ds As DataSet = db.ExecuteDataSet(cmd) If ds.Tables(0).Rows.Count > 0 Then ListView1.DataSource = ds.Tables(0) ListView1.DataBind() Else lblMessage.Text = "No Such Album Exists." End If End Using End Using 'WebNavigator.GoToResponseRedirect(WebNavigator.URLFor.ReturnUrl("~/Memories/SortImages.aspx?id=" & AlbumID)) Else 'TODO:we'll show some error msg End If Catch ex As Exception MsgBox(ex.Message) lblMessage.Text = "Oo Poop!!" End Try End If Else WebNavigator.GoToResponseRedirect(WebNavigator.URLFor.LoginWithReturnUrl("~/Memories/CreateAlbum.aspx")) Exit Sub End If End Sub The above code works fine.I have added an Update Panel in the page to avoid post back, But when i add the button click as a trigger <Triggers> <asp:AsyncPostBackTrigger ControlID="btnSubmit" /> </Triggers> in the update panel to avoid post back, i get the following error.This happens when i add the button click as a Trigger to the update panel.

    Read the article

  • UPK Professional Customer Success Story: Medtronic

    - by [email protected]
    In case you missed the live event, be sure to listen to last week's UPK Customer iSeminar featuring Medtronic. This was the first iSeminar in our quarterly series to showcase UPK Professional (UPK and Knowledge Pathways). Donna Miller and Staci Gilbert gave viewers an inside look at samples of Medtronic's content as they shared their experiences, methodology and best practices for use of the solution. Here are some highlights of the call: • Medtronic initially purchased UPK Professional to support a multi-year, global SAP rollout for 9,000 end users located in 24 countries. • As time went on, they expanded their use of UPK Professional to include several of their other enterprise applications: PeopleSoft, Siebel CRM, Hyperion Financial Management, a number of SAP bolt-ons, Documentum, TrackWise, and many others. • In combination with their Saba LMS, UPK Professional has allowed Medtronic to create, deploy, track and certify consistent end user training for critical transactions and processes across their organization worldwide - essential for a company in a heavily regulated industry. • For key pieces of content or certain end user populations, some Medtronic business units localize/translate the global UPK content. Staci demonstrated examples of their SAP content which has been translated into Japanese. • In the live SAP environment, end users rely on UPK's context sensitive in-application performance support. Medtronic has found this to be very helpful post go-live, giving just-in-time support so end users are confident in a new system or when performing tasks they don't often touch (at quarter or year end). UPK also serves as Medtronic's internal Google. • Medtronic has realized savings on many fronts: reduction in support calls due to in-application performance support, elimination of their training clients, and speedier training (1.5 days rather than 5-7 days) of temporary workers by moving from ILT to a blended solution that includes UPK simulations for eLearning. Thanks again to Donna and Staci for an exceptional presentation. They offered so many great examples for anyone who's looking for ways to get more out of UPK or interested in learning about UPK Professional: Knowledge Pathways. - Karen Rihs, Oracle UPK Outbound Product Management

    Read the article

  • Convert your Hash keys to object properties in Ruby

    - by kerry
    Being a Ruby noob (and having a background in Groovy), I was a little surprised that you can not access hash objects using the dot notation.  I am writing an application that relies heavily on XML and JSON data.  This data will need to be displayed and I would rather use book.author.first_name over book[‘author’][‘first_name’].  A quick search on google yielded this post on the subject. So, taking the DRYOO (Don’t Repeat Yourself Or Others) concept.  I came up with this: 1: class ::Hash 2:  3: # add keys to hash 4: def to_obj 5: self.each do |k,v| 6: if v.kind_of? Hash 7: v.to_obj 8: end 9: k=k.gsub(/\.|\s|-|\/|\'/, '_').downcase.to_sym 10: self.instance_variable_set("@#{k}", v) ## create and initialize an instance variable for this key/value pair 11: self.class.send(:define_method, k, proc{self.instance_variable_get("@#{k}")}) ## create the getter that returns the instance variable 12: self.class.send(:define_method, "#{k}=", proc{|v| self.instance_variable_set("@#{k}", v)}) ## create the setter that sets the instance variable 13: end 14: return self 15: end 16: end This works pretty well.  It converts each of your keys to properties of the Hash.  However, it doesn’t sit very well with me because I probably will not use 90% of the properties most of the time.  Why should I go through the performance overhead of creating instance variables for all of the unused ones? Enter the ‘magic method’ #missing_method: 1: class ::Hash 2: def method_missing(name) 3: return self[name] if key? name 4: self.each { |k,v| return v if k.to_s.to_sym == name } 5: super.method_missing name 6: end 7: end This is a much cleaner method for my purposes.  Quite simply, it checks to see if there is a key with the given symbol, and if not, loop through the keys and attempt to find one. I am a Ruby noob, so if there is something I am overlooking, please let me know.

    Read the article

  • Test Data in a Distributed System

    - by Davin Tryon
    A question that has been vexing me lately has been about how to effectively test (end-to-end) features in a distributed system. Particuarly, how to effectively manage (through time) test data for feature testing. The system in question is a typical SOA setup. The composition is done in JavaScript when call to several REST APIs. Each service is built as an independent block. Each service has some kind of persistent storage (SQL Server in most cases). The main issue at the moment is how to approach test data when testing end-to-end features. Functional end-to-end testing occurs through the UI, and it is therefore necessary for test data to be set up before the test run (this could be manual or automated testing). As is typical in a distributed system, identifiers from one service are used as a link in another service. So, some level of synchronization needs to be present in the data to effectively test. What is the best way to manage and set up this data after a successful deployment to a test environment? For example, is it better to manage this test data inside each service? Or package it together with the testing suite? Does that testing suite exist as a separate project? I'm interested in design guidance about how to store and manage this test data as the application features evolve.

    Read the article

  • JQuery Validation dates [migrated]

    - by james
    Im trying to get my form to validate...so basically its working, but a little bit too well, I have two text boxes, one is a start date, the other an end date in the format of mm/dd/yyyy if the start date is greater than the end date...there is an error if the end date is less than the start date...there is an error if the start date is less than today's date...there is an error The only thing is when I correct the error, the error warning is still there...here is my code: // Validate Date Ranges if ($(this).val() != '' && dates.not(this).val != '') { if ($(this).hasClass("FromCal")) { if (new Date(testDate) > new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* Start date must be earlier than end date.'); isValid = false; return; } } else { if (new Date(testDate) < new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* End date must be later than start date.'); return; } } } and here are the two text boxes: <div id="campaign_start" style="display: inline-block"> <label class="date_range_label">from:</label> <asp:TextBox ID="FromCalTbx" runat="server" Width="100px" CssClass="FromCal editable float_left required" /> </div> <div id="campaign_end" style="display: inline-block"> <label class="date_range_label">to:</label> <asp:TextBox ID="ToCalTbx" runat="server" Width="100px" CssClass="float_left optional"/> </div> PS - testDate is the start Date otherDate is the end Date

    Read the article

  • Need some critique on .NET/WCF SOA architecture plan

    - by user998101
    I am working on a refactoring of some services and would appreciate some critique on my general approach. I am working with three back-end data systems and need to expose an authenticated front-end API over http binding, JSON, and REST for internal apps as well as 3rd party integration. I've got a rough idea below that's a hybrid of what I have and where I intend to wind up. I intend to build guidance extensions to support this architecture so that devs can build this out quickly. Here's the current idea for our structure: Front-end WCF routing service (spread across multiple IIS servers via hardware load balancer) Load balancing of services behind routing is handled within routing service, probably round-robin One of the services will be a token Multiple bindings per-service exposed to address JSON, REST, and whatever else comes up later All in/out is handled via POCO DTOs Use unity to scan for what services are available and expose them The front-end services behind the routing service do nothing more than expose the API and do conversion of DTO<-Entity Unity inject service implementation to allow mocking automapper for DTO/Entity conversion Invoke WF services where response required immediately Queue to ESB for async WF -- ESB will invoke WF later Business logic WF layer Expose same api as front-end services Implement business logic Wrap transaction context where needed Call out to composite/atomic services Composite/Atomic Services Exposed as WCF One service per back-end system Standard atomic CRUD operations plus composite operations Supports transaction context The questions I have are: Are the separation of concerns outlined above beneficial? Current thought is each layer below is its own project, except the backend stuff, where each system gets one project. The project has a servicehost and all the services are under a services folder. Interfaces live in a separate project at each layer. DTO and Entities are in two separate projects under a shared folder. I am currently planning to build dedicated services for shared functionality such as logging and overload things like tracelistener to call those services. Is this a valid approach? Any other suggestions/comments?

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >