Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 118/279 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• HighPoint RAID Controller can't see drives

  - by Satellite

  I've just built a system with a HighPoint 2720 RAID controller. Everything appears to be OK, except that the controller doesn't see any of my drives - the RAID BIOS displays "ERROR. No Suitable disks". I have tried a WD SATA, Seagate SATA, and OCZ Vertex 3 SATA. I am using MiniSAS to 4x SATA breakout cables. How do I get this working? I've tried to sign up for HighPoint support, but their support site doesn't appear to be functioning correctly.

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Samsung 830 SSD

  - by anru

  I have a 128G SSD(830) of samsung installed on my win7 ultimate 64 bits machine. I have tried to copy a folder from my C drive to the SSD drive. And I have found out that copy speed is so slow, please look at picture below: I am just want to know, if this is because of I was tried to copy so many small files By the way. the SSD is Sata 3, but my mobo only has SATA 2 interface, I do not know if connect SATA 3 device to SATA 2 interface contributes to slow copy speed.

  Read the article

• What would cause SSD to become not detectable?

  - by Balthazar

  I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

  Read the article

• 8 Things You Can Do In Android’s Developer Options

  - by Chris Hoffman

  The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.     

  Read the article

• Unity not Working 14.04

  - by Back.Slash

  I am using Ubuntu 14.04 LTS x64. I did a sudo apt-get upgrade yesterday and restarted my PC. Now my taskbar and panel are missing. When I try to restart Unity using unity --replace Then I get error: unity-panel-service stop/waiting compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core unity-panel-service start/running, process 3906 compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Starting plugin: opengl libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/i965_dri.so failed (${ORIGIN}/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/swrast_dri.so failed (${ORIGIN}/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session I/O warning : failed to load external entity "/home/sumeet/.compiz/session/10de541a813cc1a8fc140170575114755000000020350005" compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Info: Loading plugin: unityshell compiz (core) - Info: Starting plugin: unityshell WARN 2014-06-02 18:46:23 unity.glib.dbus.server GLibDBusServer.cpp:579 Can't register object 'org.gnome.Shell' yet as we don't have a connection, waiting for it... ERROR 2014-06-02 18:46:23 unity.debug.interface DebugDBusInterface.cpp:216 Unable to load entry point in libxpathselect: libxpathselect.so.1.4: cannot open shared object file: No such file or directory compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported ERROR 2014-06-02 18:46:23 unity.shell.compiz unityshell.cpp:3850 Impossible to delete the unity locked stamp file compiz (core) - Error: Plugin initScreen failed: unityshell compiz (core) - Error: Failed to start plugin: unityshell compiz (core) - Info: Unloading plugin: unityshell X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 3 (X_GetWindowAttributes) Resource id in failed request: 0x3e000c9 Serial number of failed request: 10115 Current serial number in output stream: 10116 Any help would be highly appreciated. EDIT : My PC configuration description: Portable Computer product: Dell System XPS L502X (System SKUNumber) vendor: Dell Inc. version: 0.1 serial: 1006ZP1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: administrator_password=unknown boot=normal chassis=portable family=HuronRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-3000-1030-8036-B1C04F5A5031 *-core description: Motherboard product: 0YR8NN vendor: Dell Inc. physical id: 0 version: A00 serial: .1006ZP1.CN4864314C0560. slot: Part Component *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A11 date: 05/29/2012 size: 128KiB capacity: 2496KiB capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 19 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: Not Supported by CPU slot: CPU size: 800MHz capacity: 800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L1 cache physical id: 1a slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-through data *-cache:1 description: L2 cache physical id: 1b slot: L2-Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through data *-cache:2 description: L3 cache physical id: 1c slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: synchronous internal write-back unified *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 6GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: M471B5273DH0-CH9 vendor: Samsung physical id: 0 serial: 450F1160 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 0CA0E8E2 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) memory:f1000000-f107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:52 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:4000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:50 memory:f1c05000-f1c0500f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:f1c09000-f1c093ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:53 memory:f1c00000-f1c03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode cap_list configuration: driver=pcieport resources: irq:16 *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:f1b00000-f1bfffff *-network description: Wireless interface product: Centrino Wireless-N 1030 [Rainbow Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 34 serial: bc:77:37:14:47:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-27-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:f1b00000-f1b01fff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 memory:f1a00000-f1afffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:f1a00000-f1a01fff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:f1900000-f19fffff *-pci:5 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:2000(size=4096) ioport:f1800000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 06 serial: 14:fe:b5:a3:ac:40 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=172.19.167.151 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:49 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:f1c08000-f1c083ff *-isa description: ISA bridge product: HM67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide:0 description: IDE interface product: 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40b8(size=8) ioport:40cc(size=4) ioport:40b0(size=8) ioport:40c8(size=4) ioport:4090(size=16) ioport:4080(size=16) *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f1c04000-f1c040ff ioport:efa0(size=32) *-ide:1 description: IDE interface product: 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.5 bus info: pci@0000:00:1f.5 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40a8(size=8) ioport:40c4(size=4) ioport:40a0(size=8) ioport:40c0(size=4) ioport:4070(size=16) ioport:4060(size=16) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: SAMSUNG HN-M640M physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2AR1 serial: S2T3J1KBC00006 size: 596GiB (640GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=6b746d91 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 0272-3e7f size: 348MiB capacity: 350MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2013-09-18 12:20:45 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 116GiB capacity: 116GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 6037MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 110GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/os version: 3.1 serial: 4e7853ec-5555-a74d-82e0-9f49798d3772 size: 156GiB capacity: 156GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-19 09:19:00 filesystem=ntfs label=OS mount.fstype=fuseblk mount.options=ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/data version: 3.1 serial: 7666d55f-e1bf-e645-9791-2a1a31b24b9a size: 322GiB capacity: 322GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-17 23:27:01 filesystem=ntfs label=Data modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVD+-RW GT32N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/sr0 version: A201 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-battery product: DELL vendor: SANYO physical id: 1 version: 2008 serial: 1.0 slot: Rear capacity: 57720mWh configuration: voltage=11.1V `

  Read the article

• No sound after video card replaced (AMD Radeon HD 7770)

  - by Sean

  Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and installed a new video card: Radeon HD 7770. After this, my sound no longer worked in ubuntu (Win7 audio still works). Everything else in ubuntu, such as video, works fine. I suspect it has something to do with the fact that the Radeon card includes sound capability. Problem Details: If I click on System Settings - Sound, the panel freezes and stops responding indefinitely. The sound volume icon at the top of the screen (by the clock) shows 3 dashes beside it "---", and an empty drop-down box shows if I click on it. (Possibly related to 1.) When I reboot my machine, I get the message: "gnome settings daemon not responding". I have to force the reboot. I reinstalled ubunbu (perserving my home directory) and the problem persists. Diagnostics info: Following procedure outlined here: https://help.ubuntu.com/community/SoundTroubleshooting The following is a list of terminal commands, and their output: $ aplay -l List of PLAYBACK Hardware Devices There is no listing beyond that, and the command freezes until I hit control-c $ lspci -v | grep -A7 -i "audio" 00:0f.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2) Subsystem: Dell Device 0224 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at dfff0000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 Subsystem: Diamond Multimedia Systems Device aab0 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at dfefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 03:0a.0 Audio device: Creative Labs SB X-Fi Subsystem: Creative Labs Device 6002 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dbff4000 (32-bit, non-prefetchable) [size=16K] Memory at dbc00000 (64-bit, non-prefetchable) [size=2M] Memory at d4000000 (64-bit, non-prefetchable) [size=64M] I/O ports at 8c00 [size=32] Capabilities: <access denied> Notice the Diamond Multimedia Systems Device - that seems to be my video card sound. My video card is Diamond multimedia. Also there's the weird NVIDIA device in there. That must either be a remnant of my now removed NVIDIA graphics card, or else some kind of on-board thing. Not sure which. $ killall pulseaudio This allows me to open system settings - sound. But the "Test Sound" button makes no sound And the output volume + mute controls are greyed / disabled at 0 volume. It also allows me to click on the sound control in the "task bar" (beside the clock), and a volume slider drops down, but it is disabled / greyed at 0 volume. $ find /lib/modules/uname -r | grep snd /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-88pm860x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic3x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8900.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8978.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320dac33.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9090.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sta32x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98088.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9850.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-rt5631.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8903.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8580.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8523.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9877.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ads117x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8955.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8804.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sgtl5000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8750.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm2000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic32x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4642.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad193x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8753.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4535.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8985.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8350.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-dfbmcs320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs42l51.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic26.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8737.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda1380.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8776.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8995.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tpa6130a2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8727.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm5100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8991.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8510.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-jz4740-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8400.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-lm4857.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8960.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-alc5623.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4270.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic23.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8993.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8961.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8940.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda134x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad1836.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8994.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8782.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4271.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8974.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8983.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8962.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4641.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm-hubs.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8971.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8996.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wl1273.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adav80x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-spdif.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-pcm3008.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cx20442.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4671.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8711.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad73311.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98095.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9081.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8741.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm1250-ev1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8988.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adau1373.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8731.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-l3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ssm2602.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-da7210.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4104.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8904.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8728.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8770.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8990.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/snd-soc-core.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/emux/snd-emux-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/snd-util-mem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hrtimer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-pcm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-rawmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/oss/snd-mixer-oss.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-page-alloc.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-device.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-event.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-emul.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-timer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/vx/snd-vxpocket.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usbmidi-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-us122l.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usb-audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/misc/snd-ua101.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-portman2x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-serial-u16550.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mts64.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mtpav.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/vx/snd-vx-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-aloop.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/pcsp/snd-pcsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-speakers.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-isight.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-tea6330t.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4113.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-pt2258.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4117.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4114.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-cs8427.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-i2c.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/korg1212/snd-korg1212.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8830.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8820.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8810.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/aw2/snd-aw2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sis7019.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1371.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/vx222/snd-vx222.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1968.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs4281.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sonicvibes.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-maestro3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1938.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-fm801.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/nm256/snd-nm256.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-analog.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-via.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0132.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-si3054.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/riptide/snd-riptide.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1370.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als4000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0m.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ca0106/snd-ca0106.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs5530.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme32.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ymfpci/snd-ymfpci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ctxfi/snd-ctxfi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-azt3328.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs46xx/snd-cs46xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lx6464es/snd-lx6464es.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1712.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1724.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/mixart/snd-mixart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ali5451/snd-ali5451.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lola/snd-lola.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-virtuoso.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/pcxhr/snd-pcxhr.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigo.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-echo3g.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mona.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoiox.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodjx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodj.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cmipci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/asihpi/snd-asihpi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ad1889.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-rme9652.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdspm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/trident/snd-trident.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als300.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-bt87x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme96.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-miro.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti93x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusextreme.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusmax.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave-stb.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gus-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusclassic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-emu8000-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sbawe.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb-common.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-csp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-jazz16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-es18xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-azt2320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-cmi8330.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-als100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-classic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-pinnacle.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4236.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-adlib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1848/snd-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1816a/snd-ad1816a.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt1605.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt2316.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wavefront/snd-wavefront.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wss/snd-wss-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sc6000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sscape.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-opl3sa2.ko

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• How do I make changes to /proc/acpi/wakeup permanent?

  - by Jolan

  I had a problem with my Ubuntu 12.04 waking up immediately after going into suspend. I solved the problem by changing the settings in /proc/acpi/wakeup, as suggested in this question: How do I prevent immediate wake up from suspend?. After changing the settings, the system goes flawlessly into suspend and stays suspended, but after I wake it back up, the settings in /proc/acpi/wakeup are different from what I set them to. Before going to suspend: cat /proc/acpi/wakeup Device S-state Status Sysfs node SMB0 S4 *disabled pci:0000:00:03.2 PBB0 S4 *disabled pci:0000:00:09.0 HDAC S4 *disabled pci:0000:00:08.0 XVR0 S4 *disabled pci:0000:00:0c.0 XVR1 S4 *disabled P0P5 S4 *disabled P0P6 S4 *disabled pci:0000:00:15.0 GLAN S4 *enabled pci:0000:03:00.0 P0P7 S4 *disabled pci:0000:00:16.0 P0P8 S4 *disabled P0P9 S4 *disabled USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *disabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *disabled pci:0000:00:06.1 PWRB S4 *enabled SLPB S4 *enabled I tell the system to suspend, and it works as it should. But later after waking it up, the settings are changed to either: USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 or USB0 S3 *enabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *enabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 Any ideas? Thank you for your response. Unfortunately it did not solve my problem. all of /sys/bus/usb/devices/usb1/power/wakeup /sys/bus/usb/devices/usb2/power/wakeup /sys/bus/usb/devices/usb3/power/wakeup /sys/bus/usb/devices/usb4/power/wakeup as well as /sys/bus/usb/devices/3-1/power/wakeup are set to disabled, and the notebook still wakes up by itself right after going to sleep. The only thing it seems to react to are the settings in /proc/acpi/wakeup, which keep changing (resetting) every time i power off/restart my notebook.

  Read the article

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Why did Ubuntu suddenly get so slow?

  - by user101383

  12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

  Read the article

• Java Oracle Installation /usr/bin/java: cannot execute binary file

  - by Dave

  Hi I've been trying for 1 day to get Oracle Java running on Ubuntu. I have a powermac g5 with Ubuntu 12.04 ppc64. uname -a : Linux LK37 3.2.0-53-powerpc64-smp #81-Ubuntu SMP Thu Aug 22 21:17:14 UTC 2013 ppc64 ppc64 ppc64 GNU/Linux lspci: david@LK37:~$ sudo lspc [sudo] password for david: sudo: lspc: command not found david@LK37:~$ sudo lspci 0000:00:0b.0 PCI bridge: Apple Inc. CPC945 PCIe Bridge 0000:0a:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600 LE] (rev a2) 0001:00:00.0 Host bridge: Apple Inc. U4 HT Bridge 0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:07.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:08.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:09.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O 0001:01:0b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) 0001:03:0c.0 IDE interface: Broadcom K2 SATA 0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE 0001:03:0e.0 FireWire (IEEE 1394): Apple Inc. Shasta Firewire 0001:05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) 0001:05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) david@LK37:~$ I tried various ways to install Oracle Java but I always end up with: bash: /usr/bin/java: cannot execute binary file At the moment I have Installed jdk-7u25-linux-x64.tar.gz in /usr/lib/jvm/jdk1.7.0/bin/ as said in this post I already tried the web install but I get a 404 error. I hope you can help me. I started using Ubuntu yesterday so please give me the complete terminal code, it will be a lot easier for me. For those who care I want to play Minecraft and with the OpenJDK I got a java.lang error. That's why I want to install Oracle Java.

  Read the article

• No sound lenovo t60 alsa ad1981 iec958

  - by Nate

  Any help on getting the sound to come through my lenovo t60 build in speakers, headphones, or mic would greatly be appreciated. The three buttons to increase, decrease sound seem to work. Bios has sound card enabled and the buttons beep when pressed. When going to Utube or playing music, no sound is heard. Thanks Nate Feb 23 - Didn't see anything specific in the sys logs with Rhythmbox when connecting my ipod. Rhythmbox is playing, but still no sound. Here is the syslog details for today. Output is set to analog output. Feb 23 17:42:32 itgis01398 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="824" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Feb 23 17:42:33 itgis01398 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="824" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Feb 23 17:42:49 itgis01398 anacron[968]: Job `cron.daily' terminated Feb 23 17:42:49 itgis01398 anacron[968]: Job `cron.weekly' started Feb 23 17:42:49 itgis01398 anacron[12067]: Updated timestamp for job `cron.weekly' to 2011-02-23 Feb 23 17:42:53 itgis01398 anacron[968]: Job `cron.weekly' terminated Feb 23 17:42:53 itgis01398 anacron[968]: Normal exit (2 jobs run) Feb 23 18:01:19 itgis01398 kernel: [ 2731.324067] usb 1-5: new high speed USB device using ehci_hcd and address 3 Feb 23 18:01:19 itgis01398 kernel: [ 2731.482879] Initializing USB Mass Storage driver... Feb 23 18:01:19 itgis01398 kernel: [ 2731.483061] usb-storage 1-5:1.0: Quirks match for vid 05ac pid 1205: 10 Feb 23 18:01:19 itgis01398 kernel: [ 2731.483116] scsi6 : usb-storage 1-5:1.0 Feb 23 18:01:19 itgis01398 kernel: [ 2731.483306] usbcore: registered new interface driver usb-storage Feb 23 18:01:19 itgis01398 kernel: [ 2731.483310] USB Mass Storage support registered. Feb 23 18:01:20 itgis01398 kernel: [ 2732.481116] scsi 6:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 Feb 23 18:01:20 itgis01398 kernel: [ 2732.482466] sd 6:0:0:0: Attached scsi generic sg2 type 0 Feb 23 18:01:20 itgis01398 kernel: [ 2732.485095] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 Feb 23 18:01:20 itgis01398 kernel: [ 2732.485110] sd 6:0:0:0: [sdb] 7999487 512-byte logical blocks: (4.09 GB/3.81 GiB) Feb 23 18:01:20 itgis01398 kernel: [ 2732.487933] sd 6:0:0:0: [sdb] Write Protect is off Feb 23 18:01:20 itgis01398 kernel: [ 2732.487941] sd 6:0:0:0: [sdb] Mode Sense: 64 00 00 08 Feb 23 18:01:20 itgis01398 kernel: [ 2732.487947] sd 6:0:0:0: [sdb] Assuming drive cache: write through Feb 23 18:01:20 itgis01398 kernel: [ 2732.489927] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 Feb 23 18:01:20 itgis01398 kernel: [ 2732.491150] sd 6:0:0:0: [sdb] Assuming drive cache: write through Feb 23 18:01:20 itgis01398 kernel: [ 2732.491163] sdb: sdb1 sdb2 Feb 23 18:01:20 itgis01398 kernel: [ 2732.510428] sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 Feb 23 18:01:20 itgis01398 kernel: [ 2732.511288] sd 6:0:0:0: [sdb] Assuming drive cache: write through Feb 23 18:01:20 itgis01398 kernel: [ 2732.511297] sd 6:0:0:0: [sdb] Attached SCSI removable disk Feb 23 18:01:21 itgis01398 kernel: [ 2733.746675] FAT: invalid media value (0x2f) Feb 23 18:01:21 itgis01398 kernel: [ 2733.746682] VFS: Can't find a valid FAT filesystem on dev sdb1. Feb 23 18:01:22 itgis01398 upstart-udev-bridge[330]: Env must be KEY=VALUE pairs Feb 23 18:02:07 itgis01398 kernel: [ 2780.115826] sd 6:0:0:0: [sdb] Unhandled sense code Feb 23 18:02:07 itgis01398 kernel: [ 2780.115835] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Feb 23 18:02:07 itgis01398 kernel: [ 2780.115844] sd 6:0:0:0: [sdb] Sense Key : Medium Error [current] Feb 23 18:02:07 itgis01398 kernel: [ 2780.115855] Info fld=0x0 Feb 23 18:02:07 itgis01398 kernel: [ 2780.115859] sd 6:0:0:0: [sdb] Add. Sense: Unrecovered read error Feb 23 18:02:07 itgis01398 kernel: [ 2780.115870] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 08 fd e9 00 00 f0 00 Feb 23 18:02:07 itgis01398 kernel: [ 2780.115892] end_request: I/O error, dev sdb, sector 589289 Feb 23 18:02:49 itgis01398 kernel: [ 2821.351464] sd 6:0:0:0: [sdb] Unhandled sense code Feb 23 18:02:49 itgis01398 kernel: [ 2821.351473] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Feb 23 18:02:49 itgis01398 kernel: [ 2821.351482] sd 6:0:0:0: [sdb] Sense Key : Medium Error [current] Feb 23 18:02:49 itgis01398 kernel: [ 2821.351493] Info fld=0x0 Feb 23 18:02:49 itgis01398 kernel: [ 2821.351497] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information Feb 23 18:02:49 itgis01398 kernel: [ 2821.351507] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 08 fe d9 00 00 10 00 Feb 23 18:02:49 itgis01398 kernel: [ 2821.351530] end_request: I/O error, dev sdb, sector 589529 Feb 23 18:17:01 itgis01398 CRON[12709]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) volume is all of the way up.

  Read the article

• wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

  - by user203963

  i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• Mozilla Thunderbird Portable Edition

  A fully functional edition of Mozilla Thunderbird optimized for use on a USB key drive

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• Keyboard Bug or feature on Ubuntu on a MAC?

  - by ProfeDiego

  I have ubuntu 10.04 on my mac, and i have realized that when i pluged in an USB keyboard (PC) and turn on the numeric keypad if then i removed the keyboard, the keyboard on the mac (this sounds odd, not english spoken person sorry) is completely lost. Let me try to explain, when removing the USB keyboard with the numeric keypad activated, the built in mac keyboard is mapped like a numeric keyboard ONLY, j=1 k=2 l=3 u=4 ... and so on, and the others keys doesnt work, and the only way to restore normal behaviour is connecting the USB keyboard and turn off from there the numeric keypad, and then removing the usb. Is this behaviour ok? Is this a feature or a bug? Macbook 4.1 regards

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• Enable wireless on Dell Inspiron 1300

  - by Simon

  As per subject, I've looked at various resources and attempted ndiswrapper solutions, found a one-click solution that lead to a 404 and this but none works. I've run all updates. Once I managed to lose my wired connection as well and had to reinstall. This is my first hour with Linux. iwconfig gives this before I do anything: lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extens Thanks for responding lspci returns 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 30000000-301fffff Prefetchable memory behind bridge: 0000000030200000-00000000303fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfc00000-dfdfffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dfb00000-dfbfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Kernel driver in use: ata_piix 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfbfc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 Kernel modules: b44 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: Dell Wireless 1370 WLAN Mini-PCI Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb and the rfkill shows 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Just checking addtional drivers. Says no additional driver installed in this system

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

• How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

  - by VedVals

  My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

  Read the article

• Full disk encryption with seperate boot and encrypted keyfile storage: Two-Form Authentication

  - by Cain

  I am trying to setup true Full Disk encryption with two-form authentication on 12.04 and can not find out how to call a keyfile for the encrypted root out of another encrypted partition. All documentation or questions I am finding for whole or full disk encryption only encrypts separate partitions on the same disk. This is not what most are calling full disk encryption, /boot is not on a partition on the root drive, rather it is on a usb stick as sdx1. Instead root is on a logical partition on top of a LUKS container. Luks is run on the whole disk, encrypting the partition table as well. All drives in the machine are completely encrypted and to open it it requires a USB drive (what I have) as well as a passphrase (what I know) resulting in Two-Form Authentication to boot the machine. Device sdx cryptroot vg00 lvroot / There is no passphrase to open the encrypted root device, only a keyfile. That keyfile is kept on the usb drive with /boot, in its own encrypted partition (I'll call this cryptkey). In order for the root file system (cryptroot) to be opened, initramfs must ask for the passphrase to cryptkey on the usb drive, then use the keyfile inside that to open cryproot. I did manage to find what I think is the how-to I used to do this once before: http://wiki.ubuntu.org.cn/UbuntuHelp:FeistyLUKSTwoFormFactor I already have the system installed and can chroot into it, however, I can not get it to call for the keys on the USB during boot. I did find a how-to saying I needed to make a cryptroot conf for initramfs but, I believe that is for a passphrase: https://help.ubuntu.com/community/EncryptedFilesystemLVMHowto#Notes_for_making_it_work_in_Ubuntu_12.04_.22Precise_Pangolin.22_amd64 I also tried to setup crypttab. However, crypttab only works for drives mounted after the root drive as calling for a keyfile on a device not yet mounted to the system doesnt work. The Feisty how-to included scripts that would be run during boot instructing initramfs to mount the usb drive temporarily and call the keyfile for root which worked quite well except those scripts are outdated now, many of the things they relied on have been merged into something else, changed, or simply don't exist anymore. If I have missed a clear how-to for this, that would be wonderful, I just don't think I have.

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >