Search Results

Search found 47692 results on 1908 pages for 'system io'.

Page 119/1908 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

  • ASP.net file operations delay

    - by mtranda
    Ok, so here's the problem: I'm reading the stream from a FileUpload control, reading in chunks of n bytes and writing the array in a loop until I reach the stream's end. Now the reason I do this is because I need to check several things while the upload is still going on (rather than doing a Save(); which does the whole thing in one go). Here's the problem: when doing this from the local machine, I can see the file just fine as it's uploading and its size increases (had to add a Sleep(); clause in the loop to actually get to see the file being written). However, when I upload the file from a remote machine, I don't get to see it until the the file has completed uploading. Also, I've added another call to write the progress to a text file as the progress is going on, and I get the same thing. Local: the file updates as the upload goes on, remote: the token file only appears after the upload's done (which is somewhat useless since I need it while the upload's still happening). Is there some sort of security setting in (or ASP.net) that maybe saves files in a temporary location for remote machines as opposed to the local machine and then moves them to the specified destination? I would liken this with ASP.net displaying error messages when browsing from the local machine (even on the public hostname) as opposed to the generic compilation error page/generic exception page that is shown when browsing from a remote machine (and customErrors are not off) Any clues on this? Thanks in advance.

    Read the article

  • Loop over a file and write the next line if a condition is met

    - by 111078384259264152964
    Having a hard time fixing this or finding any good hints about it. I'm trying to loop over one file, modify each line slightly, and then loop over a different file. If the line in the second file starts with the line from the first then the following line in the second file should be written to a third file. !/usr/bin/env python with open('ids.txt', 'rU') as f: with open('seqres.txt', 'rU') as g: for id in f: id=id.lower()[0:4]+'_'+id[4] with open(id + '.fasta', 'w') as h: for line in g: if line.startswith(''+ id): h.write(g.next()) All the correct files appear, but they are empty. Yes, I am sure the if has true cases. :-) "seqres.txt" has lines with an ID number in a certain format, each followed by a line with data. The "ids.txt" has lines with the ID numbers of interest in a different format. I want each line of data with an interesting ID number in its own file. Thanks a million to anyone with a little advice!

    Read the article

  • Python: slow read & write for millions of small files

    - by Jami
    I am building directory tree which has tons of subdirectories and files. The total directory count is somewhere along 256^32 subdirectories with 256 files in each end which are only a few bytes long. I did this so I would have fast access to these files (since i'm not searching and i'm just directly accessing then via a known file path) I have a python script that builds this filesystem and reads & writes those files. The problem is that when I reach more than 1Gb of total filesize, the read and write methods become extremely slow. Here's the function I have that reads the contents of a file (the file contains an integer string), adds a certain number to it, then writes it back to the original file. def addInFile(path, scoreToAdd): num = scoreToAdd try: shutil.copyfile(path, '/tmp/tmp.txt') fp = open('/tmp/tmp.txt', 'r') num += int(fp.readlines()[0]) fp.close() except: pass fp = open('/tmp/tmp.txt', 'w') fp.write(str(num)) fp.close() shutil.copyfile('/tmp/tmp.txt', path) I previously tried performing linux console commands but it was slower. I copy the file to a temporary file first then access/modify it then copy it back because i found this was faster than directly accessing the file. I think the cause of the slowdown is because there're tons of files. performing this function 1000 times sometimes reach 1 minute now, but before (when there were only a few files, 1000 calls was performed for only less than 1 second) How do you suggest I fix this?

    Read the article

  • IOCP multiple socket completionports in same container

    - by Ohmages
    For the past couple of days I have been thinking about how to solve one of my problems I am facing, and I have tried to research the topic but don't really know what I can do. I have 2 sockets in the same struct that both have the same completionport. Problem is, they both use different protocols. Is there a way that I can find out which socket got triggered? Their called game_socket, and client_socket Example code would be something like... while (true) { error = GetQueuedCompletionStatus(CompletionPort, &BytesTransfered, (PULONG_PTR)&Key, &lpOverlapped, 0); srvc = CONTAINING_RECORD ( lpOverlapped, client , ol ); if ( error == TRUE ) { cout << endl << "SOCKET: [" << srvc->client_socket << "] TRIGGERED - WORKER THREAD" << endl; cout << endl << "BytesTransfered: [" << BytesTransfered << "]" << endl; if ( srvc->game_client triggered ) { // .. this code } else { // .. this code } Any ideas our help would be appreciated :)

    Read the article

  • How can I read/write data from a file?

    - by samy
    I'm writing a simple chrome extension. I need to create the ability to add sites URLs to a list, or read from the list. I use the list to open the sites in the new tabs. I'm looking for a way to have a data file I can write to, and read from. I was thinking on XML. I read there is a problem changing the content of files with Javascript. Is XML the right choice for this kinda thing? I should add that there is no web server, and the app will run locally, so maybe the problem websites are having are not same as this. Before I wrote this question, I tried one thing, and started to feel insecure because it didn't work. I made a XML file called Site.xml: <?xml version="1.0" encoding="utf-8" ?> <Sites> <site> <url> http://www.sulamacademy.com/AddMsgForum.asp?FType=273171&SBLang=0&WSUAccess=0&LocSBID=20375 </url> </site> <site> <url> http://www.wow.co.il </url> </site> <site> <url> http://www.Google.co.il </url> </site> I made this script to read the data from him, and put in on the html file. function LoadXML() { var ajaxObj = new XMLHttpRequest(); ajaxObj.open('GET', 'Sites.xml', false); ajaxObj.send(); var myXML = ajaxObj.responseXML; document.write('<table border="2">'); var prs = myXML.getElementsByTagName("site"); for (i = 0; i < prs.length; i++) { document.write("<tr><td>"); document.write(prs[i].getElementsByName("url")[0].childNode[0].nodeValue); document.write("</td></tr>"); } document.write("</table"); }

    Read the article

  • Ruby Thread with "watchdog"

    - by Sergio Campamá
    I'm implementing a ruby server for handling sockets being created from GPRS modules. The thing is that when the module powers down, there's no indication that the socket closed. I'm doing threads to handle multiple sockets with the same server. What I'm asking is this: Is there a way to use a timer inside a thread, reset it after every socket input, and that if it hits the timeout, closes the thread? Where can I find more information about this? EDIT: Code example that doesn't detect the socket closing require 'socket' server = TCPServer.open(41000) loop do Thread.start(server.accept) do |client| puts "Client connected" begin loop do line = client.readline open('log.txt', 'a') { |f| f.puts line.strip } end rescue puts "Client disconnected" end end end

    Read the article

  • UVA Online Judge 3n+1 : Right answer is Wrong answer

    - by Samuraisoulification
    Ive been toying with this problem for more than a week now, I have optimized it a lot, I seem to be getting the right answer, since it's the same as when I compare it to other's answers that got accepted, but I keep getting wrong answer. Im not sure what's going on! Anyone have any advice? I think it's a problem with the input or the output, cause Im not exactly sure how this judge thing works. So if anyone could pinpoint the problem, and also give me any advice on my code, Id be very appreciative!!! #include <iostream> #include <cstdlib> #include <stdio.h> #include <vector> using namespace std; class Node{ // node for each number that has teh cycles and number private: int number; int cycles; bool cycleset; // so it knows whether to re-set the cycle public: Node(int num){ number = num; cycles = 0; cycleset = false; } int getnumber(){ return number; } int getcycles(){ return cycles; } void setnumber(int num){ number = num; } void setcycles(int num){ cycles = num; cycleset = true; } bool cycled(){ return cycleset; } }; class Cycler{ private: vector<Node> cycleArray; int biggest; int cycleReal(unsigned int number){ // actually cycles through the number int cycles = 1; if (number != 1) { if (number < 1000000) { // makes sure it's in vector bounds if (!cycleArray[number].cycled()) { // sees if it's been cycled if (number % 2 == 0) { cycles += this->cycleReal((number / 2)); } else { cycles += this->cycleReal((3 * number) + 1); } } else { // if cycled get the number of cycles and don't re-calculate, ends recursion cycles = cycleArray[number].getcycles(); } } else { // continues recursing if it's too big for the vector if (number % 2 == 0) { cycles += this->cycleReal((number / 2)); } else { cycles += this->cycleReal((3 * number) + 1); } } } if(number < 1000000){ // sets cycles table for the number in the vector if (!cycleArray[number].cycled()) { cycleArray[number].setcycles(cycles); } } return cycles; } public: Cycler(){ biggest = 0; for(int i = 0; i < 1000000; i++){ // initialize the vector, set the numbers Node temp(i); cycleArray.push_back(temp); } } int cycle(int start, int end){ // cycles thorugh the inputted numbers. int size = 0; for(int i = start; i < end ; i++){ size = this->cycleReal(i); if(size > biggest){ biggest = size; } } int temp = biggest; biggest = 0; return temp; } int getBiggest(){ return biggest; } }; int main() { Cycler testCycler; int i, j; while(cin>>i>>j){ //read in untill \n int biggest = 0; if(i > j){ biggest = testCycler.cycle(j, i); }else{ biggest = testCycler.cycle(i, j); } cout << i << " " << j << " " << biggest << endl; } return 0; }

    Read the article

  • C# "Could not find a part of the path" - Creating Local File

    - by Pyronaut
    I am trying to write to a folder that is located on my C:\ drive. I keep getting the error of : Could not find a part of the path .. etc My filepath looks basically like this : C:\WebRoot\ManagedFiles\folder\thumbs\5c27a312-343e-4bdf-b294-0d599330c42d\Image\lighthouse.jpg And I am writing to it like so : using (MemoryStream memoryStream = new MemoryStream()) { thumbImage.Save(memoryStream, ImageFormat.Jpeg); using (FileStream diskCacheStream = new FileStream(cachePath, FileMode.CreateNew)) { memoryStream.WriteTo(diskCacheStream); } memoryStream.WriteTo(context.Response.OutputStream); } Don't worry too much about the memory stream. It is just outputting it (After I save it). Since I am creating a file, I am a bit perplexed as to why it cannot find the file (Shouldn't it just write to where I tell it to, regardless?). The strange thing is, It has no issue when I'm testing it above using File.Exists. Obviously that is returning false, But it means that atleast my Filepath is semi legit. Any help is much appreciated.

    Read the article

  • shell_exec() Doesn't Show The Output

    - by Nathan Campos
    I'm doing a PHP site that uses a shell_exec() function like this: $file = "upload/" . $_FILES["file"]["name"]; $output = shell_exec("leaf $file"); echo "<pre>$output</pre>"; Where leaf is a program that is located in the same directory of my script, but when I tried to run this script on the server, I just got nothing. What is wrong?

    Read the article

  • Execute a Application On The Server Using JavaScript

    - by Nathan Campos
    I have an application on my server that is called leaf.exe, that haves two arguments needed to run, they are: inputfile and outputfile, that will be like this example: pnote.exe input.pnt output.txt They are all on the same directory as my home page file(the executable and the input file). But I need that a JavaScript could run the application like that, then I want to know how could I do this.

    Read the article

  • C# - Problem while listing directories - DirectoryNotFoundException

    - by HoNgOuRu
    I'm getting a "DirectoryNotFoundException" error, here is the code: string directorio = "D:\MUSICA\La Trampa - El Mísero Espiral De Encanto"; DirectoryInfo dir = new DirectoryInfo(directorio); DirectoryInfo[] dirs = dir.GetDirectories(); <------------This is the line I'm having this problem. I believe it's caused when it tries to parse the tilde part of that string "Mísero". the directory "D:\MUSICA\La Trampa - El Mísero Espiral De Encanto" exists because I can see it and also have some files in it. Is there any way to send this string in correct way? Thanks

    Read the article

  • Second Thread Holding Up Entire Program in C# Windows Form Application

    - by Brandon
    In my windows form application, I'm trying to test the user's ability to access a remote machine's shared folder. The way I'm doing this (and I'm sure that there are better ways...but I don't know of them) is to check for the existence of a specific directory on the remote machine (I'm doing this because of firewall/other security restrictions that I'm confronted with in my organization). If the user has rights to access the shared folder, then it returns in no time at all, but if they don't, it hangs forever. To solve this, I threw the check into another thread and wait only 1000 milliseconds before determining that the share can't be hit by the user. However, when I do this, it still hangs as if it was never run in the same thread. What is making it hang and how do I fix it? I would think that the fact that it is in a separate thread would allow me to just let the thread finish on it's own in the background. Here is my code: bool canHitInstallPath = false; Thread thread = new Thread(new ThreadStart(() => { canHitInstallPath = Directory.Exists(compInfo.InstallPath); })); thread.Start(); thread.Join(1000); if (canHitInstallPath == false) { throw new Exception("Cannot hit folder: " + compInfo.InstallPath); }

    Read the article

  • Write physical table to csv file

    - by urema
    Hi, I was wondering if anyone knows how to write an actual table/grid to a csv file....i dont mean the content of the table/grid, i mean the actual grid lines etc etc, headers, axis..... Thanks greatly in advance. U.

    Read the article

  • Very weird C file-handling anomaly

    - by KáGé
    Hello, I got a very weird issue that I cant figure out in my school project, which is the simulation of a simple filesystem in a human-readable textfile. Unfortunately I don't yet have enough time to translate the comments in my code or make it less gibberish, so if you are bothered by that, you don't have to help, I understand. See the code HERE. Now in drive.h, at line 574 is this part: i = getline(); #ifdef DEBUG printf("Free space in all found at %d.\n\n", i); if(drive.disk != NULL){ printf("Disk OK\n\n"); } #endif //write in data state = seekline(i); Before this it finds place for the allocation database entry in the ALL sector (see the "image files" in the mounts folder, this issue was tested on mount_30.efs-dbf), then gets the line with i = getline() fine (getline is in lglobal.h, line 39), but after that any file manipulation (in this case seekline's fseek, but if I comment that out, then the first fprintf after that) crashes the program straight away. I think the file gets somehow corrupted (though the Disk OK message appears) but can't figure out how. I've tried putting i = getline(); into comment, but it didn't make any difference. I've also tried asking at local programming forums but they didn't really help either. The last few lines of the output before it crashes: Dir written. (drive.h line 562) Seekline entered: 268 (called at drive.h line 564) Getline entered. (called at drive.h line 574) Line got: 268. Free space in all found at 268. (drive.h line 576) Seekline entered: 268 (called at drive.h line 582, note that this exact call was run successfully less than 20 lines back. This one should set the pointer to the beginning of the line it is currently in) After this it crashes. Does anyone has any idea of what causes this and how could I fix it? Thank you.

    Read the article

  • Writing the output of IEnumerable<XElement> to a XML File

    - by Googler
    HI folks , This is my code to read two xml files and merge their elemnts. I want to write the output to an xml file. This is my code. IEnumerable<XElement> list0 = doc.Descendants(node1).Concat(doc2.Descendants(node2)); foreach (XElement el in list0) Console.WriteLine(el); Instead of writing to the console i need to write it to a xml file. Output is also in the xml format.How to achieve this. Can anyone pls give me a code or method to achiev this.

    Read the article

  • Need a way to determine if a file is done being written to.

    - by Khorkrak
    The situation I'm in is this - there's a process that's writing to a file, sometimes the file is rather large say 400 - 500MB. I need to know when it's done writing. How can I determine this? If I look in the directory I'll see it there but it might not be done being written. Plus this needs to be done remotely - as in on the same internal LAN but not on the same computer and typically the process that wants to know when the file writing is done is running on a Linux box with a the process that's writing the file and the file itself on a windows box. No samba isn't an option. xmlrpc communication to a service on that windows box is an option as well as using snmp to check if that's viable. Ideally Works on either Linux or Windows - meaning the solution is OS independent. Works for any type of file. Good enough: Works just on windows but can be done through some library or whatever that can be accessed with Python. Works only for PDF files. Current best idea is to periodically open the file in question from some process on the windows box and look at the last bytes checking for the PDF end tag and accounting for the eol differences because the file may have been created on Linux or Windows.

    Read the article

  • Delete temp file during finally vs delete output file during catch

    - by Russell
    This is in Java 6. I've seen more than once that people create temp files, do something, then rename it to the output file. Everything is wrapped in a try-finally block, where the temp file is deleted in finally in case something goes wrong in between. try { //do something with tempFile //do something with tempFile //do something with tempFile tempFile.renameTo(outputFile); } finally { if (tempFile.exists()) tempFile.delete() } I was wondering what are the benefits of doing that instead of doing something to the output file directly and delete it in case of exceptions. try { //do something with outputFile //do something with outputFile //do something with outputFile } catch (Exception e) { if (outputFile.exists()) outputFile.delete(); } My guess is that deleting temp files in finally benefits me when the try block can throw many kinds of exceptions. Is my guess right? What else?

    Read the article

  • PHP: What is an efficient way to parse a text file containing very long lines?

    - by Shaun
    I'm working on a parser in php which is designed to extract MySQL records out of a text file. A particular line might begin with a string corresponding to which table the records (rows) need to be inserted into, followed by the records themselves. The records are delimited by a backslash and the fields (columns) are separated by commas. For the sake of simplicity, let's assume that we have a table representing people in our database, with fields being First Name, Last Name, and Occupation. Thus, one line of the file might be as follows [People] = "\Han,Solo,Smuggler\Luke,Skywalker,Jedi..." Where the ellipses (...) could be additional people. One straightforward approach might be to use fgets() to extract a line from the file, and use preg_match() to extract the table name, records, and fields from that line. However, let's suppose that we have an awful lot of Star Wars characters to track. So many, in fact, that this line ends up being 200,000+ characters/bytes long. In such a case, taking the above approach to extract the database information seems a bit inefficient. You have to first read hundreds of thousands of characters into memory, then read back over those same characters to find regex matches. Is there a way, similar to the Java String next(String pattern) method of the Scanner class constructed using a file, that allows you to match patterns in-line while scanning through the file? The idea is that you don't have to scan through the same text twice (to read it from the file into a string, and then to match patterns) or store the text redundantly in memory (in both the file line string and the matched patterns). Would this even yield a significant increase in performance? It's hard to tell exactly what PHP or Java are doing behind the scenes.

    Read the article

  • What's the correct way to do a "catch all" error check on an fstream output operation?

    - by Truncheon
    What's the correct way to check for a general error when sending data to an fstream? UPDATE: My main concern regards some things I've been hearing about a delay between output and any data being physically written to the hard disk. My assumption was that the command "save_file_obj << save_str" would only send data to some kind of buffer and that the following check "if (save_file_obj.bad())" would not be any use in determining if there was an OS or hardware problem. I just wanted to know what was the definitive "catch all" way to send a string to a file and check to make certain that it was written to the disk, before carrying out any following actions such as closing the program. I have the following code... int Saver::output() { save_file_handle.open(file_name.c_str()); if (save_file_handle.is_open()) { save_file_handle << save_str.c_str(); if (save_file_handle.bad()) { x_message("Error - failed to save file"); return 0; } save_file_handle.close(); if (save_file_handle.bad()) { x_message("Error - failed to save file"); return 0; } return 1; } else { x_message("Error - couldn't open save file"); return 0; } }

    Read the article

  • Android USB Host Communication

    - by Kip Russell
    I'm working on a project that utilizes the USB Host capabilities in Android 3.2. I'm suffering from a deplorable lack of knowledge and talent regarding USB/Serial communication in general. I'm also unable to find any good example code for what I need to do. I need to read from a USB Communication Device. Ex: When I connect via Putty (on my PC) I enter: >GO And the device starts spewing out data for me. Pitch/Roll/Temp/Checksum. Ex: $R1.217P-0.986T26.3*60 $R1.217P-0.986T26.3*60 $R1.217P-0.987T26.3*61 $R1.217P-0.986T26.3*60 $R1.217P-0.985T26.3*63 I can send the initial 'GO' command from the Android device at which time I receive an echo of 'GO'. Then nothing else on any subsequent reads. How can I: 1) Send the 'go' command. 2) Read in the stream of data that results. The USB device I'm working with has the following interfaces (endpoints). Device Class: Communication Device (0x2) Interfaces: Interface #0 Class: Communication Device (0x2) Endpoint #0 Direction: Inbound (0x80) Type: Intrrupt (0x3) Poll Interval: 255 Max Packet Size: 32 Attributes: 000000011 Interface #1 Class: Communication Device Class (CDC) (0xa) Endpoint #0 Address: 129 Number: 1 Direction: Inbound (0x80) Type: Bulk (0x2) Poll Interval (0) Max Packet Size: 32 Attributes: 000000010 Endpoint #1 Address: 2 Number: 2 Direction: Outbound (0x0) Type: Bulk (0x2) Poll Interval (0) Max Packet Size: 32 Attributes: 000000010 I'm able to deal with permission, connect to the device, find the correct interface and assign the endpoints. I'm just having trouble figuring out which technique to use to send the initial command read the ensuing data. I'm tried different combinations of bulkTransfer and controlTransfer with no luck. Thanks. I'm using interface#1 as seen below: public AcmDevice(UsbDeviceConnection usbDeviceConnection, UsbInterface usbInterface) { Preconditions.checkState(usbDeviceConnection.claimInterface(usbInterface, true)); this.usbDeviceConnection = usbDeviceConnection; UsbEndpoint epOut = null; UsbEndpoint epIn = null; // look for our bulk endpoints for (int i = 0; i < usbInterface.getEndpointCount(); i++) { UsbEndpoint ep = usbInterface.getEndpoint(i); Log.d(TAG, "EP " + i + ": " + ep.getType()); if (ep.getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) { if (ep.getDirection() == UsbConstants.USB_DIR_OUT) { epOut = ep; } else if (ep.getDirection() == UsbConstants.USB_DIR_IN) { epIn = ep; } } } if (epOut == null || epIn == null) { throw new IllegalArgumentException("Not all endpoints found."); } AcmReader acmReader = new AcmReader(usbDeviceConnection, epIn); AcmWriter acmWriter = new AcmWriter(usbDeviceConnection, epOut); reader = new BufferedReader(acmReader); writer = new BufferedWriter(acmWriter); }

    Read the article

  • How do I turn an array of bytes back into a file and open it automatically with C#?

    - by Ace Grace
    Hi, I am writing some code to add file attachments into an application I am building. I have add & Remove working but I don't know where to start to implement open. I have an array of bytes (from a table field) and I don't know how to make it automatically open e.g. If I have an array of bytes which is a PDF, how do I get my app to automatically open Acrobat or whatever the currently assigned application for the extension is using C#?

    Read the article

  • Why does DataInputStream not support integers?

    - by Jason
    I need to read in a list of numbers from a file, none of which are larger than 32767. Originally I was going to use the Scanner class to pull in the data, then I read about DataInputStream. This would work well for me, except that according to the API, it supports all primitive variables EXCEPT ints! Listed are longs, shorts, bytes, chars, booleans, ect, but no ints. I have no need for double precision from the incoming data. Is this a deliberate or unintentional oversight?

    Read the article

  • How do make my encryption algorithm encrypt more than 128 bits?

    - by Ranhiru
    OK, now I have coded for an implementation of AES-128 :) It is working fine. It takes in 128 bits, encrypts and returns 128 bits So how do i enhance my function so that it can handle more than 128 bits? How do i make the encryption algorithm handle larger strings? Can the same algorithm be used to encrypt files? :) The function definition is public byte[] Cipher(byte[] input) { }

    Read the article

  • Write a file in UTF-8 using FileWriter (Java)?

    - by user1280970
    I have the following code however, I want it to write as a UTF-8 file to handle foreign characters. Is there a way of doing this, is there some need to have a parameter? I would really appreciate your help with this. Thanks. try { BufferedReader reader = new BufferedReader(new FileReader("C:/Users/Jess/My Documents/actresses.list")); writer = new BufferedWriter(new FileWriter("C:/Users/Jess/My Documents/actressesFormatted.csv")); while( (line = reader.readLine()) != null) { //If the line starts with a tab then we just want to add a movie //using the current actor's name. if(line.length() == 0) continue; else if(line.charAt(0) == '\t') { readMovieLine2(0, line, surname.toString(), forename.toString()); } //Else we've reached a new actor else { readActorName(line); } } } catch (IOException e) { e.printStackTrace(); } }

    Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >