Search Results

Search found 1620 results on 65 pages for 'proc'.

Page 12/65 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Unable to access intel fake RAID 1 array in Fedora 14 after reboot

  - by Sim

  Hello everyone, 1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays: 2x320GB RAID1 - used for operating systems md126 2x1TB RAID1 - used for data md125 I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only": [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active (auto-read-only) raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# and the partition in it was not available as device special file in /dev: [root@localhost ~]# ls -l /dev/md125* brw-rw---- 1 root disk 9, 125 Jan 6 15:50 /dev/md125 [root@localhost ~]# But the partition is there according to fdisk: [root@localhost ~]# fdisk -l /dev/md125 Disk /dev/md125: 1000.2 GB, 1000202043392 bytes 19 heads, 10 sectors/track, 10281682 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b238ea9 Device Boot Start End Blocks Id System /dev/md125p1 2048 1953519615 976758784 83 Linux [root@localhost ~]# I tried to "activate" the array in different ways (I'm not experienced with mdadm and the man page is gigantic so I was only browsing it looking for my answer) but it was impossible - the array would still stay in "auto read only" and the device special file for the partition it will not be in /dev. It was only after I recreated the partition via fdisk that it reappeared in /dev... until next reboot. So, my question is - How do I make the array automatically available after reboot? Here is some additional information: 1st I am able to see the UUID of the array in blkid: [root@localhost ~]# blkid /dev/sdc: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sdd: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/md126p1: UUID="60C8D9A7C8D97C2A" TYPE="ntfs" /dev/md126p2: UUID="3d1b38a3-b469-4b7c-b016-8abfb26a5d7d" TYPE="ext4" /dev/md126p3: UUID="1Msqqr-AAF8-k0wi-VYnq-uWJU-y0OD-uIFBHL" TYPE="LVM2_member" /dev/mapper/vg00-rootlv: LABEL="_Fedora-14-x86_6" UUID="34cc1cf5-6845-4489-8303-7a90c7663f0a" TYPE="ext4" /dev/mapper/vg00-swaplv: UUID="4644d857-e13b-456c-ac03-6f26299c1046" TYPE="swap" /dev/mapper/vg00-homelv: UUID="82bd58b2-edab-4b4b-aec4-b79595ecd0e3" TYPE="ext4" /dev/mapper/vg00-varlv: UUID="1b001444-5fdd-41b6-a59a-9712ec6def33" TYPE="ext4" /dev/mapper/vg00-tmplv: UUID="bf7d2459-2b35-4a1c-9b81-d4c4f24a9842" TYPE="ext4" /dev/md125: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sda: TYPE="isw_raid_member" /dev/md125p1: UUID="420adfdd-6c4e-4552-93f0-2608938a4059" TYPE="ext4" [root@localhost ~]# Here is how /etc/mdadm.conf looks like: [root@localhost ~]# cat /etc/mdadm.conf # mdadm.conf written out by anaconda MAILADDR root AUTO +imsm +1.x -all ARRAY /dev/md1 UUID=89f60dee:e46a251f:7475814b:d4cc19a9 ARRAY /dev/md126 UUID=a8775c90:cee66376:5310fc13:63bcba5b ARRAY /dev/md125 UUID=b9a1149f:ae114fc8:a6000d77:354dc42a [root@localhost ~]# here is how /proc/mdstat looks like after I recreate the partition in the array so that it becomes available: [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# Detailed output regarding the array in subject: [root@localhost ~]# mdadm --detail /dev/md125 /dev/md125: Container : /dev/md127, member 0 Raid Level : raid1 Array Size : 976759808 (931.51 GiB 1000.20 GB) Used Dev Size : 976759940 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 2 Update Time : Fri Jan 7 00:38:00 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 30ebc3c2:b6a64751:4758d05c:fa8ff782 Number Major Minor RaidDevice State 1 8 32 0 active sync /dev/sdc 0 8 48 1 active sync /dev/sdd [root@localhost ~]# and /etc/fstab, with /data commented (the filesystem that is on this array): # # /etc/fstab # Created by anaconda on Thu Jan 6 03:32:40 2011 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg00-rootlv / ext4 defaults 1 1 UUID=3d1b38a3-b469-4b7c-b016-8abfb26a5d7d /boot ext4 defaults 1 2 #UUID=420adfdd-6c4e-4552-93f0-2608938a4059 /data ext4 defaults 0 1 /dev/mapper/vg00-homelv /home ext4 defaults 1 2 /dev/mapper/vg00-tmplv /tmp ext4 defaults 1 2 /dev/mapper/vg00-varlv /var ext4 defaults 1 2 /dev/mapper/vg00-swaplv swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 [root@localhost ~]# Thanks in advance to everyone that even read this whole issue :-)

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• After updating debian lenny, ps stops recognising my users

  - by William Coates

  Since upgrading my debian lenny box with apt-get, ps seems to be behaving strangely, and also if i run top i see under the user column the ids, not the names. whoami => foo ps -U foo => ERROR: User name does not exist. I get this output when I run "strace -e trace=open ps -U foo 2&1 | less", seems just this /usr/lib/libnss_compat.so.2 doesnt exist: open("/etc/mtab", O_RDONLY) = 3 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 open("/proc/self/stat", O_RDONLY) = 3 open("/proc/uptime", O_RDONLY) = 3 open("/etc/nsswitch.conf", O_RDONLY) = 4 open("/etc/ld.so.cache", O_RDONLY) = 4 open("/lib/libnss_compat.so.2", O_RDONLY)=4 open("/usr/lib/libnss_compat.so.2", O_RDONLY)=-1 ENOENT (No such file or directory) open("/proc/self/stat", O_RDONLY)= 4

  Read the article

• Solaris mounting partitions

  - by Benco

  I'm trying to mount a partition in solaris 10... bash-3.00# mount /dev/dsk/c0t0d0s3 /data mount: /dev/dsk/c0t0d0s3 is already mounted or /data is busy As far as I know c0t0d0s3 isn't already mounted elsewhere, so what's really going on here? From /etc/mnttab : /dev/dsk/c1t0d0s0 / ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=7800001285811136 /devices /devices devfs dev=4840000 1285811125 ctfs /system/contract ctfs dev=48c0001 1285811125 proc /proc proc dev=4880000 1285811125 mnttab /etc/mnttab mntfs dev=4900001 1285811125 swap /etc/svc/volatile tmpfs xattr,dev=4940001 1285811125 objfs /system/object objfs dev=4980001 1285811125 sharefs /etc/dfs/sharetab sharefs dev=49c0001 1285811125 /usr/lib/libc/libc_hwcap1.so.1 /lib/libc.so.1 lofs dev=780000 1285811131 fd /dev/fd fd rw,dev=4b40001 1285811136 swap /tmp tmpfs xattr,dev=4940002 1285811137 swap /var/run tmpfs xattr,dev=4940003 1285811137 -hosts /net autofs nosuid,indirect,ignore,nobrowse,dev=4c00001 1285811148 auto_home /home autofs indirect,ignore,nobrowse,dev=4c00002 1285811148 cordb:vold(pid530) /vol nfs ignore,noquota,dev=4bc0001 1285811149 I suspect the problem is not related to the mount point, but rather the disk slice I'm trying to mount: bash-3.00# newfs -v /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3: Device busy

  Read the article

• Linux (non-transparent) per-process hugepage accounting

  - by Dan Pritts

  I've recently converted some java apps to run with linux manually-configured hugepages. I've got about 10 tomcats running on a system and I am interested in knowing how much memory each one is using. I can get summary information out of /proc/meminfo as described in Linux Huge Pages Usage Accounting. But I can't find any tools that tell me about the actual per-process hugepage usage. I poked around in /proc/pid/numa_stat and found some interesting information that led me to this grossity: function pshugepage () { HUGEPAGECOUNT=0 for num in `grep 'anon_hugepage.*dirty=' /proc/$@/numa_maps | awk '{print $6}' | sed 's/dirty=//'` ; do HUGEPAGECOUNT=$((HUGEPAGECOUNT+num)) done echo process $@ using $HUGEPAGECOUNT huge pages } The numbers it gives me are plausible, but i'm far from confident this method is correct. Environment is a quad-CPU dell, 64GB ram, RHEL6.3, oracle jdk 1.7.x (current as of 20130728)

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• Ubuntu server 12.04.03 not checking disk partitions on reboot?

  - by jamesc

  My MOTD is showing: *** /dev/md2 will be checked for errors at next reboot *** *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** However, a standard sudo shutdown -r now does not appear to check the disks and the message remains. My guess is that the partitions 'should' be checked and that they are not being... so how can I get Ubuntu to check the partitions at reboot and keep things nice and safe? Update - this is the output of cat /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md/3 /home ext4 defaults 0 0 Update 2 - One message gone... Using @christianwolff's suggestions... sudo rm /var/lib/update-notifier/fsck-at-reboot sudo touch /forcefsck sudo shutdown -r now And now the motd is down to *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** So 'md2(ext4)' has been checked and the message updated.

  Read the article

• Installing grub2 on ubutntu with software raid mirroring

  - by Marko

  Hi guys, Can someone help me out on this? I accidentally installed grub on usb flash drive during ubuntu server installation. Now I cant boot system without drive attached to server. I want to install grub on hard drive with grub-install but i don't know what to set as location for boot loader? my fstab looks like this: file system mount point type options dump pass proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/pdc_jdbeghhjg1 / ext4 errors=remount-ro 0 1 /dev/mapper/pdc_jdbeghhjg5 none swap sw 0 0 and partition tables for hard drives as this: Device Boot Start End Blocks Id System /dev/sda1 2048 1215662079 607830016 83 Linux /dev/sda2 1215664126 1249998847 17167361 5 Extended /dev/sda5 1215664128 1249998847 17167360 82 Linux swap / Solaris Device Boot Start End Blocks Id System /dev/sdb1 1 75672 607830016 83 Linux /dev/sdb2 75672 77809 17167361 5 Extended /dev/sdb5 75672 77809 17167360 82 Linux swap / Solaris ?

  Read the article

• Installing grub2 on ubuntu with software raid mirroring

  - by Marko

  Can someone help me out on this? I accidentally installed grub on usb flash drive during ubuntu server installation. Now I cant boot system without drive attached to server. I want to install grub on hard drive with grub-install but i don't know what to set as location for boot loader? my fstab looks like this: file system mount point type options dump pass proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/pdc_jdbeghhjg1 / ext4 errors=remount-ro 0 1 /dev/mapper/pdc_jdbeghhjg5 none swap sw 0 0 and partition tables for hard drives as this: Device Boot Start End Blocks Id System /dev/sda1 2048 1215662079 607830016 83 Linux /dev/sda2 1215664126 1249998847 17167361 5 Extended /dev/sda5 1215664128 1249998847 17167360 82 Linux swap / Solaris Device Boot Start End Blocks Id System /dev/sdb1 1 75672 607830016 83 Linux /dev/sdb2 75672 77809 17167361 5 Extended /dev/sdb5 75672 77809 17167360 82 Linux swap / Solaris ?

  Read the article

• Read only file system

  - by Jack Moon

  I'm running Ubuntu 12.10, Upon opening any shell I get the following error: /home/jack/.rbenv/libexec/rbenv-init: line 87: cannot create temp file for here-document: Read-only file system I realised this wasn't simply a rbenv issue, as any file I try to write to returns an error saying the system is Read-only. I don't know how else to describe my problem, each time I boot up the system goes through a disk check, where it supposedly fixes several errors in my disk. Here is my /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1cc4b2ab-a984-4516-ac25-6d64f5050244 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=4e0dfeae-701a-43ce-b5c6-65f15ab3d8e3 none swap sw 0 0 The entire file system is read-only. I've tried the following sudo fsck.ext4 -f /dev/sda1 which gave the following (shortened) output /dev/sda1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda1: ***** REBOOT LINUX ***** /dev/sda1: 1257080/45268992 files (1.0% non-contiguous), 50696803/181051904 blocks

  Read the article

• How do I get a Canon MG, MP and MX series USB printer working?

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0 Here is what I have tried: Tried the HK link again, but no luck so far. However, I connected the printer wirelessly to router on other xp box. Installing the driver from ppa:michael-gruz/canon doesn't work, but the driver is installed

  Read the article

• How to get rid of devices in the right panel of Nautilus ?

  - by Patryk

  I would like to rid of not mounted ntfs partition from Nautilus' right panel ( I just want 352 GB Filesystem - d drive to be there. First of all 352 GB Filesystem is in fact d so I do not know why it is duplicated. Secondly I have put Acer and SYSTEM RESERVED to be nouser mounts on purpose, so that I (or sombody else) will not format it (or else) by accident. So my /etc/fstab looks like this : #comments....... # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 UUID=1384cee0-6a71-4b83-b0d3-1338db925168 / ext4 noatime,errors=remount-ro 0 1 UUID=e3729117-b936-4c1d-9883-aee73dab6729 none swap sw 0 0 #------ MY WINDOWS D DRIVE---------- UUID=98E8B14DE8B12A80 /media/d ntfs defaults,errors=remount-ro,user 0 0 # #-------ACER---------------- UUID=01CBEA9D4476C2F0 /media/acer ntfs defaults,noauto,noexec,ro,nouser 0 0 # #-------SYSTEM RESERVED----- UUID=01CBEA95760F9330 /media/systemreserved ntfs defaults,noauto,noexec,ro,nouser 0 0 #UUID=58F9-C17E /boot/efi vfat defaults 0 1 blkid and fdisk -l root@XXX:/home/YYY# fdisk -l ... Device Boot Start End Blocks Id System /dev/sda1 4096 27262975 13629440 27 Hidden NTFS WinRE /dev/sda2 27262992 27467791 102400 7 HPFS/NTFS/exFAT /dev/sda3 27467792 232267775 102399992 7 HPFS/NTFS/exFAT /dev/sda4 232267793 976771071 372251639+ f W95 Ext'd (LBA) /dev/sda5 232267795 918867967 343300086+ 7 HPFS/NTFS/exFAT /dev/sda6 * 918870016 968044543 24587264 83 Linux /dev/sda7 968046592 976771071 4362240 82 Linux swap / Solaris root@XXX:/home/YYY# blkid /dev/sda1: LABEL="PQSERVICE" UUID="01CBEA95730D28A0" TYPE="ntfs" /dev/sda2: LABEL="SYSTEM RESERVED" UUID="01CBEA95760F9330" TYPE="ntfs" /dev/sda3: LABEL="Acer" UUID="01CBEA9D4476C2F0" TYPE="ntfs" /dev/sda5: UUID="98E8B14DE8B12A80" TYPE="ntfs" /dev/sda6: UUID="1384cee0-6a71-4b83-b0d3-1338db925168" TYPE="ext4" /dev/sda7: UUID="e3729117-b936-4c1d-9883-aee73dab6729" TYPE="swap"

  Read the article

• Brand new battery is 100% charged but at 0% capacity

  - by Chris Conway

  I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

  Read the article

• How to fix sound in wolfenstein Enemy Territory

  - by GrizzLy

  I installed wolf:et, and i cant get sound to work. Everything that i have installed is in default paths, i had 10.4 and then upgraded to 10.10 via software update gui. I had sound working in 10.04 with method under 2. I have tried following killall esd; et; esd with that i get ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp ------------------------------------ sudo -i echo "et.x86 0 0 direct" /proc/asound/card0/pcm0p/oss echo "et.x86 0 0 disable" /proc/asound/card0/pcm0c/oss exit with that i get bash: /proc/asound/card0/pcm0p/oss: No such file or directory and indeed i do not have that, i have only sub0 and sub1 in pcm0p I have tried running et with et-sdl-sound script, but with that i get this output in console http://pastebin.com/J7gRU1uh I have probably messed up sdl libraries, could not get sound to work, so downloaded new from debian package site and installed them. Tried setting SDL_AUDIODRIVER="pulse" in et-sdl-sound, looks like i am getting same error as in method 3. pasuspender -- et +set s_alsa_pcm plughw:0 gives me ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp _------------------------------------ Misc: @Oli: i do not know if i am running pulse or esd, how can i check that?

  Read the article

• USB Device first mounted as root, then by user

  - by Petr Marek

  When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

  Read the article

• Failed to spawn test

  - by Lost

  Running a simple test in Ubuntu 12.04: sudo lxc-execute -n test /bin/bash -l debug -o outout Got error message: lxc-execute: failed to spawn 'test' cat outout: lxc-execute 1347053658.113 DEBUG lxc_start - sigchild handler set lxc-execute 1347053658.113 INFO lxc_start - 'test' is initialized lxc-execute 1347053658.366 DEBUG lxc_start - Dropping cap_sys_boot and watching utmp lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/' (rootfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/sys' (sysfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/proc' (proc) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev' (devtmpfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev/pts' (devpts) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/' (ext3) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/fs/fuse/connections' (fusectl) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/debug' (debugfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/security' (securityfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/lock' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/shm' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/rpc_pipefs' (rpc_pipefs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/scratch/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/share' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/proj/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/users/bhu' (nfs) lxc-execute 1347053658.367 ERROR lxc_start - failed to spawn 'test' Run command: sudo lxc-checkconfig Kernel config /proc/config.gz not found, looking in other places... Found kernel config file /boot/config-2.6.38.7-1.0emulab --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/bin/lxc-checkconfig What's the problem? Thanks a lot

  Read the article

• Lost files after installing Ubuntu

  - by Joshua Rosato

  I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

  Read the article

• Canon MG6100 series USB Printer not mounting

  - by user35201

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Cannot access the filesystems using LiveCD (LVM2,EXT2)

  - by ftkg

  I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• All files on automounted NTFS partition are marked as executable

  - by MHC

  I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >