Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 123/514 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

    - by Luke Puplett
    I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

    Read the article

  • Adding Ubuntu installation to VIsta boot loader

    - by frapfap
    Hi, I had a Vista partition and created a partition and installed Ubuntu 9.10. During the Ubuntu installation I unchecked "Install Boot Loader" so it didn't install the GRUB bootloader. I wanted to keep Vistas boot loader so I could manage it within Vista as I know you can - Ive just forgot where in the Control Panel you do it! Anyway for some reason I incorrectly assumed that the Ubuntu entry would be added to the Vista boot loader. How do enable to choose which OS to use during booting up the computer as at the moment it just automatically loads Vista? Apologies if I'm technically incorrect - what I explained is what I thought was going on!! Thanks.

    Read the article

  • GRUB reporting wrong partition type

    - by plok
    It all started when I had to replace one of the disks that the software RAID 1 on this machine currently uses. From that moment on I have not been able to boot to the Windows XP that is installed on the fourth hard drive, /dev/sdd. I am almost positive that the problem is related not to Windows but to GRUB, as if I unplug all the other hard drives so that the Windows XP disk is now /dev/sda it boots with no problem. The problem seems to be that GRUB detects a wrong partition type, which I understand suggest that something is really messed up. This is what I get when I try to follow the steps that until now had worked like a charm: grub> map (hd0) (hd3) grub> map (hd3) (hd0) grub> root (hd3,0) Filesystem type is ext2fs, partition type 0xfd 0xfd? That doesn't make sense. /dev/sdb and sdc are 0xfd (Linux raid), but not /dev/sdd: edel:~# fdisk -l [...] Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00048d89 Device Boot Start End Blocks Id System /dev/sdd1 * 1 30400 244187968+ 7 HPFS/NTFS edel:/boot/grub# cat device.map (hd0) /dev/sda (hd1) /dev/sdb (hd2) /dev/sdc (hd3) /dev/sdd I have been trying to work this out for hours, to no avail. Can anyone point me in the right direction?

    Read the article

  • Adding Windows 7 to GRUB

    - by Aakarshit
    I had Windows 7 and Vista installed on my laptop. When I installed Ubuntu 9.04 the GRUB entry for Windows 7 was erased and I can only see choices for Vista and Ubuntu in the boot menu. How do I overcome this problem?

    Read the article

  • Prevent Win7 boot loader from taking over the WinXP boot loader

    - by Chris
    My setup: 1 physical hard drive (500gb divided equally into 2 partitions) Windows XP Partition (Current OS) Empty Partition where I will be installing Windows 7 My question is how do I prevent the Windows7 boot loader from taking over my WindowsXP boot loader when installing the new OS ? The reason I am asking is because I already have a ghosted backup of my WinXP partition and if I ever need to restore my xp partition using that backup, would it not overwrite the Windows7 boot loader that was placed in the XP partition with the one from the backup, thus making windows 7 unable to boot. Also what would happen if I decided to delete the Windows XP partition altogether somewhere down the road and along with it the Win7 boot loader that was placed there, wouldn't that cause the system not to boot at all.. To avoid these issues, I simply want to make sure that BOTH the Win7 and WinXP boot loaders are available on their respective partitions and they do not interfere with each other in any way. Is this possible? Thx, Chris

    Read the article

  • Dualbooting Win7 and Gentoo, error

    - by Tommy Jakobsen
    Hello I'm trying to setup a dualboot with Gentoo Linux and Windows 7. Heres my partitions: /dev/sda1 /boot partition, ext2 /dev/sda2 win7 partition, ntfs /dev/sda3 swap partition, linux swap /dev/sda4 root partition, btrfs Using Grub, I can boot into Gentoo, but when I'm choosing to boot Windows 7, nothing happens. It just writes the Grub options for that choice, and then it hangs. grub.conf: default 0 timeout 30 title Gentoo root (hd0,0) kernel /boot/kernel-x86_64-2.6.31 root=/dev/sda4 title Windows rootnoverify (hd0,1) makeactive chainloader +1 Any ideas? Help will be much appreciated!

    Read the article

  • Cloned screen on monitors with different resolutions

    - by jrtokarz
    I want to set up a system with two displays connected. One display will be a 22inch monitor with a native resolution of 1920x1080. The other display is a 19inch display native resolution 1024x768. I want to clone the 1920x1080 display on to the 1024x768 display. I have tried this and the 1080p image is squashed on to the smaller display. Is it possible to set it up such that rather than squashing the image, I can get the smaller display to use a virtual resolution of 1920x1080 and pan the display?

    Read the article

  • How to reinstall Windows Boot Manager on EFI partition

    - by joaocandre
    So I've been trying to install Ubuntu on a second HDD on my desktop, which has W8 installed on a SSD (UEFI-only boot). Thing is, during Ubuntu installation I made the mistake of choosing to install the bootloader (GRUB) to the first disk (the SSD), and after install I could not boot into W8 (the entries in GRUB didn't work). Following these instructions, I managed to be able to get "Windows Boot Manager" back, however I lost GRUB in the process, and got a duplicate "Windows Boot Manager" entry in BIOS, along with the "Ubuntu" entry, which then I used to boot into Ubuntu. Later, I decided to reinstall Ubuntu, and formatted the HDD from within windows, however, the entries in BIOS stayed the same, and, while I had the HDD connected to the motherboard, I could not boot into an Ubuntu Live USB (in order to reinstall Ubuntu). I made another mistake by updating the BIOS, which cleared all of the EFI boot entries in BIOS, and, right now, I get an error when boot from the SSD: grub: device not found (...) So it seems that grub is still installed in the EFI partition of the SSD, and since I don't have the WBM entry in BIOS anymore, I cannot even boot into Windows, and the previous instructions don't work anymore. Is there another way to reset W8 EFI partition to the default?

    Read the article

  • How to Load Balance 2 Internet Connections on a Windows 7 machine?

    - by Jimmy Chandra
    It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

    Read the article

  • Is it possible to boot Windows 7 from when you're harddrive's partition with two OSes?

    - by Muhammad
    I have a PC with a hard drive that's partition into home directories for Windows 7 and Ubuntu. I primarily use Windows 7 and occasionally (once a week) use Ubuntu. When I boot up my computer, I usually get taken to a boot menu that includes about 5 different options: 3 are for Ubuntu's configurations, one's for swap, and the forth is for Windows 7. Then after I select Windows 7 or Ubuntu from this menu, I get taken to another menu that again asks me for Windows 7 or Ubuntu. This time, there's only 2 options, Windows 7 and Ubuntu. [Side note: out of experience I realized most boot menus are timed and so are these.] So if I ever turn my computer on without actually sitting in front of it for a few minutes, it boots into Ubuntu. I'm trying to figure out what I need to do so I can first get rid of the 2 boot menus. And if possible, I'm looking for help changing my boot options where I can load up Windows 7 (even with the boot menu wait of about 30 seconds). My harddrive's partition's laid out like this: Windows 7 (C partition) Multimedia (D partition, I just use this for backup/non-OS stuff) Ubuntu (home directory) Swap Is there any other information I need to provide?

    Read the article

  • Upload of photos from cf card to pc is super slow

    - by Sharon
    I have a new custom built pc. It has 8B of RAM and was working like a dream. Suddenly it is super slow and taking hours to download photos that used to take just minutes. I notice that there is 8GB RAM but only 3,25GB usable. could this be the problem? If so how to I change it? I'm using Windows 7

    Read the article

  • Possible boot conflict?

    - by Evan Kroske
    I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

    Read the article

  • Suggestion for boot manager in external hard disk

    - by Korrupzion
    Hi, I just bought an 1TB External Hard drive with eSATA, USB, FW400/800 (LaCie if you are interested). I already put the windows 7 installation in a FAT32 active partition so i can plug the HDD via USB, since my notebook or other computers doesn't support boot via eSATA commonly, and it works. Now i want to do more partitions so i'm looking for a way to have a boot manager as active partitions that allows me to boot from different partitions in my HDD (win7, ubuntu installations for example) I want to know if you know any software to do this or you already have this system. Thanks and sorry i have too many grammar errors because english is not my native language :)

    Read the article

  • Wireless technology - which is better: more single radio APs or less dual radio APs?

    - by gert_78
    We are currently talking to vendors of wireless solutions for a wireless deployment in a university campus with some 5000 students. One vendor is offering us a Cisco solution with a WLC 5508 controller and 69 2x2 MIMO Dual-band/Dual radio APs (Aironet AP 1042 model) The other vendor is offering us an Aruba solution with a 3600 controller and 96 2x2 MIMO dual band BUT single radio APs (Aruba AP93) Both vendors are charging 82.000 US$ (support, 3y service contracts, switches and additional required options all included of course) The Aruba vendor is trying to convince me that 96 single radio APs will give us more connection/users/capacity then the 69 dual radio APs. I have my doubts about that and since it is my core competence-domain I wanted to ask here the opinion of people that have a more profound knowledge and experience in this area. When you talk to vendors it's often hard to get objective information. So try to answer only if you are sure and please mention it if you are affiliated with one of the vendors. I appreciate all useful help and want to thank you in advance for the effort!

    Read the article

  • Windows 8 installer: Something Happened

    - by mcandre
    My school provides Windows 8 through MSDN. When I run the Windows 8 installer, it says: What can I do? Specs: systeminfo | findstr /B /C:"OS Name" /C:"OS Version" OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 systeminfo | findstr /B /C:"System Manufacturer" /C:"System Model" System Manufacturer: Apple Inc. System Model: MacBookPro5,5 Also posted in Microsoft Community.

    Read the article

  • Use one home directory for more than one operating system

    - by Just Jake
    I want to configure the same user account across multiple operating systems. Right now, I'm set up for general use in Mac OS 10.6.6 "Snow Leopard," and I have about 200gb of files in my home directory (/Users/justjake/). I want to use this user (and home directory) for other operating systems on other partitions. For example, I have Mac OS 10.5 installed on a 12gb partition. How can I share permissions, user accounts across my two operating systems? Would moving the my /Users directory from 10.6 to it's own partition then mounting it using /etc/fstab solve my issue?

    Read the article

  • how to run an AFS file server on a specific ethernet card (in Debian)

    - by listboss
    I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

    Read the article

  • Keyboard and monitor recommendations

    - by Dmn
    I'm about to get a 23" monitor to connect to my laptop for programming, and general multimedia besides. This is the monitor; what do you think? Also, would you recommend getting a keyboard to use instead of the laptop's one? It seems like it would be awkward otherwise. This is the keyboard I'm looking at because it seems to have the low laptop style keys. Would you recommend something different?

    Read the article

  • Workstation Card

    - by david
    I am going to buy an HP EliteBook 8740w. The problem is it comes with Nvidia quadro 2800m and ati 7820m firepro 3d? please advise which is better?

    Read the article

  • Control which os is booted on multi-boot system

    - by mooware
    I am setting up a server with multiple operating systems for the automatic testruns of my company's product. I'd like to be able to control with a script which OS boots up after a restart, so I could say for example "after the windows run, boot into linux". I thought of using the windows bootloader for all OSes, because it should be easy to just change the default entry in C:\boot.ini to whichever system I want to boot. Is this a feasible way of doing this? Are there better options?

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >