Search Results

Search found 3166 results on 127 pages for 'git p4'.

Page 123/127 | < Previous Page | 119 120 121 122 123 124 125 126 127  | Next Page >

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Solaris 11.1 changes building of code past the point of __NORETURN

  - by alanc

  While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

  Read the article

• Optimizing a 3D World Javascript Animation

  - by johnny

  Hi! I've recently come up with the idea to create a tag cloud like animation shaped like the earth. I've extracted the coastline coordinates from ngdc.noaa.gov and wrote a little script that displayed it in my browser. Now as you can imagine, the whole coastline consists of about 48919 points, which my script would individually render (each coordinate being represented by one span). Obviously no browser is capable of rendering this fluently - but it would be nice if I could render as much as let's say 200 spans (twice as much as now) on my old p4 2.8 Ghz (as a representative benchmark). Are there any javascript optimizations I could use in order to speed up the display of those spans? One 'coordinate': <div id="world_pixels"> <span id="wp_0" style="position:fixed; top:0px; left:0px; z-index:1; font-size:20px; cursor:pointer;cursor:hand;" onmouseover="magnify_world_pixel('wp_0');" onmouseout="shrink_world_pixel('wp_0');" onClick="set_askcue_bar('', 'new york')">new york</span> </div> The script: $(document).ready(function(){ world_pixels = $("#world_pixels span"); world_pixels.spin(); setInterval("world_pixels.spin()",1500); }); z = new Array(); $.fn.spin = function () { for(i=0; i<this.length; i++) { /*actual screen coordinates: x/y/z --> left/font-size/top 300/13/0 300/6/300 | / |/ 0/13/300 ----|---- 600/13/300 /| / | 300/20/300 300/13/600 */ /*scale font size*/ var resize_x = 1; /*scale width*/ var resize_y = 2.5; /*scale height*/ var resize_z = 2.5; var from_left = 300; var from_top = 20; /*actual math coordinates: 1 -1 | / |/ 1 ----|---- -1 /| / | 1 -1 */ //var get_element = document.getElementById(); //var font_size = parseInt(this.style.fontSize); var font_size = parseInt($(this[i]).css("font-size")); var left = parseInt($(this[i]).css("left")); if (coast_line_array[i][1]) { } else { var top = parseInt($(this[i]).css("top")); z[i] = from_top + (top - (300 * resize_z)) / (300 * resize_z); //global beacause it's used in other functions later on var top_new = from_top + Math.round(Math.cos(coast_line_array[i][2]/90*Math.PI) * (300 * resize_z) + (300 * resize_z)); $(this[i]).css("top", top_new); coast_line_array[i][3] = 1; } var x = resize_x * (font_size - 13) / 7; var y = from_left + (left- (300 * resize_y)) / (300 * resize_y); if (y >= 0) { this[i].phi = Math.acos(x/(Math.sqrt(x^2 + y^2))); } else { this[i].phi = 2*Math.PI - Math.acos(x/(Math.sqrt(x^2 + y^2))); i } this[i].theta = Math.acos(z[i]/Math.sqrt(x^2 + y^2 + z[i]^2)); var font_size_new = resize_x * Math.round(Math.sin(coast_line_array[i][4]/90*Math.PI) * Math.cos(coast_line_array[i][0]/180*Math.PI) * 7 + 13); var left_new = from_left + Math.round(Math.sin(coast_line_array[i][5]/90*Math.PI) * Math.sin(coast_line_array[i][0]/180*Math.PI) * (300 * resize_y) + (300 * resize_y)); //coast_line_array[i][6] = coast_line_array[i][7]+1; if ((coast_line_array[i][0] + 1) > 180) { coast_line_array[i][0] = -180; } else { coast_line_array[i][0] = coast_line_array[i][0] + 0.25; } $(this[i]).css("font-size", font_size_new); $(this[i]).css("left", left_new); } } resize_x = 1; function magnify_world_pixel(element) { $("#"+element).animate({ fontSize: resize_x*30+"px" }, { duration: 1000 }); } function shrink_world_pixel(element) { $("#"+element).animate({ fontSize: resize_x*6+"px" }, { duration: 1000 }); } I'd appreciate any suggestions to optimize my script, maybe there is even a totally different approach on how to go about this. The whole .js file which stores the array for all the coordinates is available on my page, the file is about 2.9 mb, so you might consider pulling the .zip for local testing: metaroulette.com/files/31218.zip metaroulette.com/files/31218.js P.S. the php I use to create the spans: <?php //$arbitrary_characters = array('a','b','c','ddsfsdfsdf','e','f','g','h','isdfsdffd','j','k','l','mfdgcvbcvbs','n','o','p','q','r','s','t','uasdfsdf','v','w','x','y','z','0','1','2','3','4','5','6','7','8','9',); $arbitrary_characters = array('cat','table','cool','deloitte','askcue','what','more','less','adjective','nice','clinton','mars','jupiter','testversion','beta','hilarious','lolcatz','funny','obama','president','nice','what','misplaced','category','people','religion','global','skyscraper','new york','dubai','helsinki','volcano','iceland','peter','telephone','internet', 'dialer', 'cord', 'movie', 'party', 'chris', 'guitar', 'bentley', 'ford', 'ferrari', 'etc', 'de facto'); for ($i=0; $i<96; $i++) { $arb_digits = rand (0,45); $arbitrary_character = $arbitrary_characters[$arb_digits]; //$arbitrary_character = "."; echo "<span id=\"wp_$i\" style=\"position:fixed; top:0px; left:0px; z-index:1; font-size:20px; cursor:pointer;cursor:hand;\" onmouseover=\"magnify_world_pixel('wp_$i');\" onmouseout=\"shrink_world_pixel('wp_$i');\" onClick=\"set_askcue_bar('', '$arbitrary_character')\">$arbitrary_character</span>\n"; } ?>

  Read the article

• Norton Ghost EBAB03F1: The specified network name is no longer available.

  - by Breck Carter

  After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

  Read the article

• Norton Ghost EBAB03F1: The specified network name is no longer available

  - by Breck Carter

  After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

  Read the article

• ensime scala errors (class scala.Array not found, object scala not found)

  - by Jeff Bowman

  I've installed ensime according to the README.md file, however, I get errors in the inferior-ensime-server buffer with the following: INFO: Fatal Error: scala.tools.nsc.MissingRequirementError: object scala not found. scala.tools.nsc.MissingRequirementError: object scala not found. at scala.tools.nsc.symtab.Definitions$definitions$.getModuleOrClass(Definitions.scala:516) at scala.tools.nsc.symtab.Definitions$definitions$.ScalaPackage(Definitions.scala:43) at scala.tools.nsc.symtab.Definitions$definitions$.ScalaPackageClass(Definitions.scala:44) at scala.tools.nsc.symtab.Definitions$definitions$.UnitClass(Definitions.scala:89) at scala.tools.nsc.symtab.Definitions$definitions$.init(Definitions.scala:786) at scala.tools.nsc.Global$Run.(Global.scala:593) at scala.tools.nsc.interactive.Global$TyperRun.(Global.scala:473) at scala.tools.nsc.interactive.Global.newTyperRun(Global.scala:535) at scala.tools.nsc.interactive.Global.reloadSources(Global.scala:289) at scala.tools.nsc.interactive.Global$$anonfun$reload$1.apply(Global.scala:300) at scala.tools.nsc.interactive.Global$$anonfun$reload$1.apply(Global.scala:300) at scala.tools.nsc.interactive.Global.respond(Global.scala:276) at scala.tools.nsc.interactive.Global.reload(Global.scala:300) at scala.tools.nsc.interactive.CompilerControl$$anon$1.apply$mcV$sp(CompilerControl.scala:81) at scala.tools.nsc.interactive.Global.pollForWork(Global.scala:132) at scala.tools.nsc.interactive.Global$$anon$2.run(Global.scala:192) also: INFO: Fatal Error: scala.tools.nsc.MissingRequirementError: class scala.Array not found. scala.tools.nsc.MissingRequirementError: class scala.Array not found. at scala.tools.nsc.symtab.Definitions$definitions$.getModuleOrClass(Definitions.scala:516) at scala.tools.nsc.symtab.Definitions$definitions$.getClass(Definitions.scala:474) at scala.tools.nsc.symtab.Definitions$definitions$.ArrayClass(Definitions.scala:217) at scala.tools.nsc.backend.icode.TypeKinds$REFERENCE.(TypeKinds.scala:258) at scala.tools.nsc.backend.icode.GenICode$ICodePhase.(GenICode.scala:55) at scala.tools.nsc.backend.icode.GenICode.newPhase(GenICode.scala:43) at scala.tools.nsc.backend.icode.GenICode.newPhase(GenICode.scala:25) at scala.tools.nsc.Global$Run$$anonfun$4.apply(Global.scala:606) at scala.tools.nsc.Global$Run$$anonfun$4.apply(Global.scala:605) at scala.collection.LinearSeqOptimized$class.foreach(LinearSeqOptimized.scala:62) at scala.collection.immutable.List.foreach(List.scala:46) at scala.tools.nsc.Global$Run.(Global.scala:605) at scala.tools.nsc.interactive.Global$TyperRun.(Global.scala:473) at scala.tools.nsc.interactive.Global.newTyperRun(Global.scala:535) at scala.tools.nsc.interactive.Global.reloadSources(Global.scala:289) at scala.tools.nsc.interactive.Global.typedTreeAt(Global.scala:309) at scala.tools.nsc.interactive.Global$$anonfun$getTypedTreeAt$1.apply(Global.scala:326) at scala.tools.nsc.interactive.Global$$anonfun$getTypedTreeAt$1.apply(Global.scala:326) at scala.tools.nsc.interactive.Global.respond(Global.scala:276) at scala.tools.nsc.interactive.Global.getTypedTreeAt(Global.scala:326) at scala.tools.nsc.interactive.CompilerControl$$anon$2.apply$mcV$sp(CompilerControl.scala:89) at scala.tools.nsc.interactive.Global.pollForWork(Global.scala:132) at scala.tools.nsc.interactive.Global$$anon$2.run(Global.scala:192) Also none of the type identification works for me, I get 'NA' if I get anything at all. C-c t causes emacs to lock up. I'm running: Ubuntu 10.04 (64bit version) emacs 23.1.50.1 ensime from git (as of 3 May 2010) scala is version 2.8.0.RC1 java is 1.6.0_20 (from sun) here is a copy of the log: http://dl.dropbox.com/u/5309017/ensime.log Thanks! Jeff

  Read the article

• List of freely available programming books

  - by Karan Bhangui

  I'm trying to amass a list of programming books with opensource licenses, like Creative Commons, GPL, etc. The books can be about a particular programming language or about computers in general. Hoping you guys could help: Languages BASH Advanced Bash-Scripting Guide (An in-depth exploration of the art of shell scripting) C The C book C++ Thinking in C++ C++ Annotations How to Think Like a Computer Scientist C# .NET Book Zero: What the C or C++ Programmer Needs to Know About C# and the .NET Framework Illustrated C# 2008 (Dead Link) Data Structures and Algorithms with Object-Oriented Design Patterns in C# Threading in C# Common Lisp Practical Common Lisp On Lisp Java Thinking in Java How to Think Like a Computer Scientist Java Thin-Client Programming JavaScript Eloquent JavaScript Haskell Real world Haskell Learn You a Haskell for Great Good! Objective-C The Objective-C Programming Language Perl Extreme Perl (license not specified - home page is saying "freely available") The Mason Book (Open Publication License) Practical mod_perl (CreativeCommons Attribution Share-Alike License) Higher-Order Perl Learning Perl the Hard Way PHP Practical PHP Programming Zend Framework: Survive the Deep End PowerShell Mastering PowerShell Prolog Building Expert Systems in Prolog Adventure in Prolog Prolog Programming A First Course Logic, Programming and Prolog (2ed) Introduction to Prolog for Mathematicians Learn Prolog Now! Natural Language Processing Techniques in Prolog Python Dive Into Python Dive Into Python 3 How to Think Like a Computer Scientist A Byte of Python Python for Fun Invent Your Own Computer Games With Python Ruby Why's (Poignant) Guide to Ruby Programming Ruby - The Pragmatic Programmer's Guide Mr. Neighborly's Humble Little Ruby Book SQL Practical PostgreSQL x86 assembly Paul Carter's tutorial Lua Programming In Lua (for v5 but still largely relevant) Algorithms and Data Structures Algorithms Data Structures and Algorithms with Object-Oriented Design Patterns in Java Planning Algorithms Frameworks/Projects The Django Book The Pylons Book Introduction to Design Patterns in C++ with Qt 4 (Open Publication License) Version control The SVN Book Mercurial: The Definitive Guide Pro Git UNIX / Linux The Art of Unix Programming Linux Device Drivers, Third Edition Others Structure and Interpretation of Computer Programs The Little Book of Semaphores Mathematical Logic - an Introduction An Introduction to the Theory of Computation Developers Developers Developers Developers Linkers and loaders Beej's Guide to Network Programming Maven: The Definitive Guide I will expand on this list as I get comments or when I think of more :D Related: Programming texts and reference material for my Kindle What are some good free programming books? Can anyone recommend a free software engineering book? Edit: Oh I didn't notice the community wiki feature. Feel free to edit your suggestions right in!

  Read the article

• jQueryMobile: how to work with slider events?

  - by balexandre

  I'm testing the slider events in jQueryMobile and I must been missing something. page code is: <div data-role="fieldcontain"> <label for="slider">Input slider:</label> <input type="range" name="slider" id="slider" value="0" min="0" max="100" /> </div> and if I do: $("#slider").data("events"); I get blur, focus, keyup, remove What I want to do is to get the value once user release the slider handle and having a hook to the keyup event as $("#slider").bind("keyup", function() { alert('here'); } ); does absolutely nothing :( I must say that I wrongly assumed that jQueryMobile used jQueryUI controls as it was my first thought, but now working deep in the events I can see this is not the case, only in terms of CSS Design. What can I do? jQuery Mobile Slider source code can be found on Git if it helps anyone as well a test page can be found at JSBin As I understand, the #slider is the textbox with the value, so I would need to hook into the slider handle as the generated code for this slider is: <div data-role="fieldcontain" class="ui-field-contain ui-body ui-br"> <label for="slider" class="ui-input-text ui-slider" id="slider-label">Input slider:</label> <input data-type="range" max="100" min="0" value="0" id="slider" name="slider" class="ui-input-text ui-body-null ui-corner-all ui-shadow-inset ui-body-c ui-slider-input" /> <div role="application" class="ui-slider ui-btn-down-c ui-btn-corner-all"> <a class="ui-slider-handle ui-btn ui-btn-corner-all ui-shadow ui-btn-up-c" href="#" data-theme="c" role="slider" aria-valuemin="0" aria-valuemax="100" aria-valuenow="54" aria-valuetext="54" title="54" aria-labelledby="slider-label" style="left: 54%;"> <span class="ui-btn-inner ui-btn-corner-all"> <span class="ui-btn-text"></span> </span> </a> </div> </div> and checking the events in the handler anchor I get only the click event $("#slider").next().find("a").data("events");

  Read the article

• Subversion vision and roadmap

  - by gbjbaanb

  Recently C Michael Pilato of the core subversion team posted a mail to the subversion dev mailing list suggesting a vision and roadmap for the future of Subversion. Naturally, he wanted as much feedback and response as possible which is why I'm posting this here - to elicit some suggestions and contributions from you, the users of Subversion. Any comments are welcome, and I shall feedback a synopsis with a link to this question to the dev mailing list. Similarly, I've created a post on ServerFault to get feedback from the administator side of things too. So, without further ado: Vision The first thing on his "vision statement" is: Subversion has no future as a DVCS tool. Let's just get that out there. At least two very successful such tools exist already, and to squeeze another horse into that race would be a poor investment of energy and talent. There's no need to suggest distributed features for subversion. If you want a DVCS, there should be no ill-feeling if you migrate to Git, Mercurial or Bazaar. As he says, its pointless trying to make SVN like them when they already exist, especially when there are different usage patterns that SVN should be targetting. The vision for Subversion is: Subversion exists to be universally recognized and adopted as an open-source, centralized version control system characterized by its reliability as a safe haven for valuable data; the simplicity of its model and usage; and its ability to support the needs of a wide variety of users and projects, from individuals to large-scale enterprise operations. Roadmap Several ideas were suggested as being "very nice to have" and are offered as the starting point of a future roadmap. These are: Obliterate Shelve/Checkpoint Repository-dictated Configuration Rename Tracking Improved Merging Improved Tree Conflict Handling Enterprise Authentication Mechanisms Forward History Searching Log Message Templates If anyone has suggestions to add, or comments on these, the subversion community would welcome all of them. Community And lastly, there was a call for more people to become involved with Subversion development. As with most OSS projects it can be daunting to join, but there is now a push for more to be done to help. If you feel like you can contribute, please do so.

  Read the article

• Autoloading Development or Production configs (best practices)

  - by Xeoncross

  When programming sites you usually have one set of config files for the development environment and another set for the production server (or one file with both settings). I am assuming all projects should be handled by version control like git or svn. Manual file transfers (like FTP) is wrong on so many levels. How you enable/disable the correct settings (so that your system knows which ones to use) is a problem for me. Each system I work on just kind of jimmy-rigs a solution. Below are the 3 methods I know of and I am hoping that someone can submit a more elegant solutions. 1) File Based The system loads a folder structure based on the URL requested. /site.com /site.fakeTLD /lib index.php For example, if the url is http://site.com then the system loads the production config files located in the site.com folder. However, if I'm working on the site locally I visit http://site.fakeTLD to work on the local copy of the site. To setup this I edit my hosts file and add site.fakeTLD to point to my own computer (127.0.0.1/localhost) and then create a vhost in apache. So now I can work on the codebase locally and then push to the server without any trouble. The problem is that this is susceptible to a "host" injection attack. So someone loading site.com could set the host to site.fakeTLD and then the system would load my development config files instead of production. 2) Config Based The config files contain on section for development - and one for production. The problem is that each time you go to push your changes to the repo you have to edit the file to specify which set of config options should be used. $use = 'production'; //'development'; This leaves the repo open to human error should one of the developers forget to enable the right setting. 3) File System Check Based All the development machines have an extra empty file called "development.txt" or something. Each time the system loads it checks for this file - if found then it knows it is in development mode - if missing then it knows it is in production mode. Since the file is NEVER ADDED to the repo then it will never be pushed (and checked out) on the production machine. However, this just doesn't feel right and causes a slight slow down since all filesystem checks are slow. Is there anyway that the server can auto-detect wither to use the development or production configs?

  Read the article

• active_scaffold routing error

  - by Elizabeth Buckwalter

  If you haven't seen my question yesterday, this is my second rails app. The first went nice and smooth, but this one keeps giving me one random error after another. I installed active_scaffold for this app as well as the last app (the first error, instead of using script/install plugin git://active_scaffold repository, I did script/install plugin http://active_scaffold repository.) I didn't want to spell out basic CRUD on minor models. After the install problems, (before I found the http solution from a windows user when I'm on Linux) I thought I'd try out Hobo. Well, Hobo updated actionmailer, actionpack, activerecord, activeresource, and installed rack. Rails isn't even using the updated versions. But as you can see at the bottom of the trace it's using rack. I have a feeling it has something to do with my futzing around with installing Hobo which I uninstalled. Thanks in advanced. [Edit] I had asked the question over at the ActiveScaffold Group the answer (if you don't want to follow the link) was that this line needed to be added to routes: map.resources :modelName, :active_scaffold => true It doesn't entirely answer my question, since the documentation said nothing about changing routes. But, it works. [/Edit] ActionController::RoutingError in Departments#index Showing vendor/plugins/active_scaffold/frontends/default/views/_list_header.html.erb where line #8 raised: No route matches {:_method=:get, :action="show_search", :controller="departments"} Extracted source (around line #8): 5: <% next if controller.respond_to? link.security_method and !controller.send(link.security_method) -%> 6: <% next if link.action == 'new' && params[:nested].nil? && active_scaffold_config.list.always_show_create %> 7: <% next if link.action == 'show_search' && active_scaffold_config.list.always_show_search %> 8: <%= render_action_link(link, new_params) -%> 9: <% end -%> 10: 11: <%= loading_indicator_tag(:action => :table) %> Trace of template inclusion: vendor/plugins/active_scaffold/frontends/default/views/list.html.erb Full Trace It was taking forever to format it. I'm still not fully conversant in SO's formatting (sometimes the server is down. reboots are reinstalls. it's a play server)

  Read the article

• Unable to add SSH pub key for GitHub

  - by Kaushik

  I am trying to set up a new GitHub account as part of learning ruby on rails. My OS is windows. I am having the following problem while trying to add my public key to the GitHub SSH public keys. When I put the key in the text area, supply a name, and click 'Add Key', I am taken to the Job profile page without any confirmation that the key has been added.(I am using SSH client GUI to generate RSA keys). When I come back to the SSH public keys page, I see that the key is not there. I tried this multiple times...without any result. Just as a test, I tried to ssh to the GitHub account using 'ssh -v [email protected]' and here is the verbose output: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: Connection established. debug1: identity file /c/Users/Administrator/.ssh/identity type -1 debug1: identity file /c/Users/Administrator/.ssh/id_rsa type -1 debug1: identity file /c/Users/Administrator/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5github2 debug1: match: OpenSSH_5.1p1 Debian-5github2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'github.com' is known and matches the RSA host key. debug1: Found key in /c/Users/Administrator/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Administrator/.ssh/identity debug1: Trying private key: /c/Users/Administrator/.ssh/id_rsa debug1: Trying private key: /c/Users/Administrator/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Also, why is it looking for the keys in c/Users/Administrator/.ssh/ Is there a possibility of changing this default location? EDIT: With Mozila, I get error msg: Oops! The key has already been taken. The key is invalid. It must begin with 'ssh-rsa' or 'ssh-dss'. My key looks like: ---- BEGIN SSH2 PUBLIC KEY ---- Comment: "[2048-bit rsa, Administrator@Kaushik-THINK, Sun Jan 02 2011 \ 02:40:03]" AAAAB3NzaC1yc2EAAAADAQABAAABAQDoA5xqJozKmAHTGh9hgmagsFOl2hdPzS8ZPV9Ta1 xU0JiUnHef38Rvz/5oqL1wW7SjmZbc/+tCPOfU1lg3UisFXajJhek2bjJ2qsKd4Sjax2Nj ZMYD7djPb8rokUYSKW3bdYyJHtJH+murz04UGdCcZ8HqkMTzqlh3zAIK7SIlCy+mtAi5A/ sm0JbqlNGHB6YrL1aWIcOSolIx2HWt8cWhlK77guT9dPgd0HT59Gn0uhO7UWGLrNdJut0x ian3HdvNYMUXoO/SkNlxvWRgZ1UOhaB+qf4hw5RCGcBbqP3fM4LKpurHZx4wEpgmM0e4EM +2PYdf46uxChNdBl7J5sZF ---- END SSH2 PUBLIC KEY ---- I still can't see the key..so not sure how it says it is already taken.

  Read the article

• Revision control for writing programming lessons

  - by Dietrich Epp

  I'd like to write a series programming lessons that guide programmers to build a certain kind of program. After each lesson, I'd like to provide sample code that implements what that lesson covered, and the next lesson would use that code as a starting point. Right now I'm using Git to keep track of the code from lesson to lesson. Each lesson has its own branch. lesson1: A--B--C \ lesson2: D--E--F \ lesson3: G--H--I However, suppose that now I want to make it easier on the Windows programmers using my lessons, so I add a Visual Studio project to lesson 1 and then merge it into lessons 2 and 3. lesson1: A--B--C--------------J \ \ lesson2: D--E--F--------K \ \ lesson3: G--H--I--L And then someone points out a bug in lesson 2 that causes crashes on certain systems. (This diagram is where I am right now, and I'm having doubts about continuing along this path.) lesson1: A--B--C--------------J \ \ lesson2: D--E--F--------K--M \ \ \ lesson3: G--H--I--L--N Here are the problems I imagine having: If I had many lessons, and I fix something in lesson 1, am I going to have to spend fifteen minutes or more just merging that one simple change? I know I'll probably have to test all of those lessons again, but I can put that off. When I make a bunch of changes to various lessons on one computer, how do I pull all of the branches at the same time? If I decide to publish these lessons, I'd like a way to tag all of the branches to correspond with what I publish. I figure I'll just need to tag each branch separately, but it would be nice if there were a better way. When I look at the history, I imagine becoming terribly confused about what I've done. Compare the above diagram to a hypothetical diagram below, where I use rebase instead of merge (and rebase has its own problems): lesson1: A--B--C--J \ lesson2: D2--E2--F2--M \ lesson3: G2--H2--I2 Do any of you have experience working with a project like this? Should I consider using a different VCS, such as Darcs? (Note: it would be a real pain to use centralized VCS, so don't suggest one of those unless the benefits are clear.) Should I consider writing plugins or extra tools for a VCS (such as a "meta tag" which tags several branches)?

  Read the article

• Mercurial for Beginners: The Definitive Practical Guide

  - by Laz

  Inspired by Git for beginners: The definitive practical guide. This is a compilation of information on using Mercurial for beginners for practical use. Beginner - a programmer who has touched source control without understanding it very well. Practical - covering situations that the majority of users often encounter - creating a repository, branching, merging, pulling/pushing from/to a remote repository, etc. Notes: Explain how to get something done rather than how something is implemented. Deal with one question per answer. Answer clearly and as concisely as possible. Edit/extend an existing answer rather than create a new answer on the same topic. Please provide a link to the the Mercurial wiki or the HG Book for people who want to learn more. Questions: Installation/Setup How to install Mercurial? How to set up Mercurial? How do you create a new project/repository? How do you configure it to ignore files? Working with the code How do you get the latest code? How do you check out code? How do you commit changes? How do you see what's uncommitted, or the status of your current codebase? How do you destroy unwanted commits? How do you compare two revisions of a file, or your current file and a previous revision? How do you see the history of revisions to a file? How do you handle binary files (visio docs, for instance, or compiler environments)? How do you merge files changed at the "same time"? Tagging, branching, releases, baselines How do you 'mark' 'tag' or 'release' a particular set of revisions for a particular set of files so you can always pull that one later? How do you pull a particular 'release'? How do you branch? How do you merge branches? How do you merge parts of one branch into another branch? Other Good GUI/IDE plugin for Mercurial? Advantages/disadvantages? Any other common tasks a beginner should know? How do I interface with Subversion? Other Mercurial references Mercurial: The Definitive Guide Mercurial Wiki Meet Mercurial | Peepcode Screencast

  Read the article

• Installing Enclosure with Netbeans

  - by jdknewb

  Hi all, I am having trouble installing Enclosure and getting it to work. I have followed this guide http://www.enclojure.org/gettingstarted and successfully installed Enclosure (I think). However, when I try to build the sample application (labrepl) I get a bunch of errors and a failed build. I haven't used Java in a long time and I've never used Netbeans, and the error doesn't seem very helpful with my limited knowledge of this domain. I'm using the latest Netbeans and the Enclosure URL from the guide. Since I am on Windows, I can't use git to clone the repo, so I'm not sure what to do from here. Anyway, here are the error messages. WARNING: You are running embedded Maven builds, some build may fail due to incompatibilities with latest Maven release. To set Maven instance to use for building, click here. Scanning for projects... [#process-resources] [resources:resources] Using default encoding to copy filtered resources. [#compile] [ERROR]Transitive dependency resolution for scope: compile has failed for your project. [ERROR]Error message: Missing: [ERROR]---------- [ERROR]1) org.clojure:clojure-contrib:jar:1.2.0-master-SNAPSHOT [ERROR] Try downloading the file manually from the project website. [ERROR] Then, install it using the command: [ERROR] mvn install:install-file -DgroupId=org.clojure -DartifactId=clojure-contrib -Dversion=1.2.0-master-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file [ERROR] Alternatively, if you host your own repository you can deploy the file there: [ERROR] mvn deploy:deploy-file -DgroupId=org.clojure -DartifactId=clojure-contrib -Dversion=1.2.0-master-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id] [ERROR] Path to dependency: [ERROR] 1) labrepl:labrepl:jar:0.0.1 [ERROR] 2) org.clojure:clojure-contrib:jar:1.2.0-master-SNAPSHOT [ERROR]---------- [ERROR]1 required artifact is missing. [ERROR]for artifact: [ERROR] labrepl:labrepl:jar:0.0.1 [ERROR]from the specified remote repositories: [ERROR] central (http://repo1.maven.org/maven2), [ERROR] clojars (http://clojars.org/repo/), [ERROR] incanter (http://repo.incanter.org), [ERROR] clojure-snapshots (http://build.clojure.org/snapshots), [ERROR] clojure (http://build.clojure.org/releases), [ERROR] clojure-releases (http://build.clojure.org/releases) [ERROR]Group-Id: labrepl [ERROR]Artifact-Id: labrepl [ERROR]Version: 0.0.1 [ERROR]From file: C:\Users\chloey\Documents\NetBeansProjects\RelevanceLabRepl\pom.xml ------------------------------------------------------------------------ For more information, run with the -e flag ------------------------------------------------------------------------ BUILD FAILED ------------------------------------------------------------------------ Total time: 1 second Finished at: Wed Jun 09 21:53:04 CDT 2010 Final Memory: 72M/172M ------------------------------------------------------------------------ Thanks all.

  Read the article

• train wreck. Rails requires RubyGems >= 1.3.2

  - by JZ

  I recently upgraded ruby to ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10] and I think I broke rails. When I attempt to load rails. I get an odd message. Please help! $ ruby script/server Rails requires RubyGems = 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ rails -v Rails 3.0.0.beta $ gem -v 1.3.6 $ which gem /usr/bin/gem $ whereis gem /usr/bin/gem $ which rails /usr/bin/rails $ whereis rails /usr/bin/rails $ /usr/bin/gem -v 1.3.6 $ /usr/bin/rails -v Rails 3.0.0.beta $ ruby script/console Rails requires RubyGems >= 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ gem list rails *** LOCAL GEMS *** rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) $ gem list *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.0.beta, 2.3.5, 2.2.2, 1.3.6) actionpack (3.0.0.beta, 2.3.5, 2.2.2, 1.13.6) actionwebservice (1.2.6) activemerchant (1.4.1) activemodel (3.0.0.beta) activerecord (3.0.0.beta, 2.3.5, 2.2.2, 1.15.6) activerecord-tableless (0.1.0) activeresource (3.0.0.beta, 2.3.5, 2.2.2) activesupport (3.0.0.beta, 2.3.5, 2.2.2, 1.4.4) acts_as_ferret (0.4.3) arel (0.2.pre) authlogic (2.1.3) builder (2.1.2) bundler (0.9.3) calendar_date_select (1.15) capistrano (2.5.2) cgi_multipart_eof_fix (2.5.0) chronic (0.2.3) columnize (0.3.1) compass (0.8.17) daemons (1.0.10) dnssd (0.6.0) erubis (2.6.5) fastercsv (1.5.0) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.6) flay (1.4.0) flog (2.4.0) gbarcode (0.98.16) gem_plugin (0.2.3) git (1.2.5) haml (2.2.15) haml-edge (2.3.100) highline (1.5.0) hoe (2.4.0) hpricot (0.6.164) i18n (0.3.3) javan-whenever (0.3.7) jeweler (1.4.0) jscruggs-metric_fu (1.1.5) json_pure (1.2.0) libxml-ruby (1.1.2) linecache (0.43) mail (2.1.2) mechanize (0.9.3) memcache-client (1.7.8) mime-types (1.16) mislav-will_paginate (2.3.11) mocha (0.9.7) mojombo-chronic (0.3.0) mongrel (1.1.5) needle (1.3.0) net-scp (1.0.1) net-sftp (2.0.1, 1.1.1) net-ssh (2.0.4, 1.1.4) net-ssh-gateway (1.0.0) nifty-generators (0.3.0) nokogiri (1.4.0) openrain-action_mailer_tls (1.1.3) passenger (2.2.5) polyglot (0.2.9) prawn (0.6.3) prawn-core (0.6.3) prawn-format (0.2.3) prawn-layout (0.3.2) prawn-security (0.1.1) rack (1.1.0, 1.0.1) rack-mount (0.4.5) rack-test (0.5.3) rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) railties (3.0.0.beta) rake (0.8.7, 0.8.3) rake-compiler (0.6.0) RedCloth (4.1.1) reek (1.2.6) relevance-rcov (0.9.2.1) rmagick (2.12.2) roodi (2.1.0) rsl-stringex (1.0.3) rspec (1.2.9) rspec-rails (1.2.9) ruby-debug (0.10.3) ruby-debug-base (0.10.3) ruby-openid (2.1.2) ruby-yadis (0.3.4) ruby2ruby (1.2.4) ruby_parser (2.0.4) rubyforge (2.0.3) rubygems-update (1.3.6, 1.3.5) rubynode (0.1.5) searchlogic (2.3.9) sexp_processor (3.0.3) spree (0.9.4) sqlite3-ruby (1.2.5, 1.2.4) termios (0.9.4) test-unit (2.0.5) text-format (1.0.0) text-hyphen (1.0.0) thor (0.13.0) tlsmail (0.0.1) topfunky-gruff (0.3.5) treetop (1.4.3) tzinfo (0.3.16) xmpp4r (0.4)

  Read the article

• SVN: Branches for Every Little Change?

  - by yar

  Hi. We have a client (who has a client, who has a client) who is driving us mad with change requests to a code base (in PHP). Our first response was to just work in a main trunk in SVN, but the client often comes back and requests that a certain change needs to get pushed to the live servers ASAP. On the other hand, other changes get reduced in priority suddenly, which originally came grouped with other changes (seemingly). We are thinking of using a branch for every change request. Is this mad? What other solutions might work? Thanks! Edit: This is a really hard question to choose the correct answer for. Thanks to everybody for your great answers. Edit: I know that the best answer I chose was not particularly popular. I too wanted to find a technical solution to this problem. But now I think that if the client wants software with features that can be deployed in a modular fashion... this problem should not be solved in our use of the version control system. It would have to be designed into the software. Edit: Now it's almost a month later and my coworker/client has convinced me that multiple branches is the way to go. This is not just due to the client's insanity, but also based on our need to be able to determine if a feature is "ready to go" or "needs more work" or whatever. I don't have the SVN with me, but we merge using the advice from the SVN Cookbook: you merge the branch from the revision it was branched to the head revision. Also, using this system, we merge all branches at some point and that becomes the new QA and then live build. Then we branch from that. Last Edit (Perhaps): Months later, this system is still working out for us. We create branches for every ticket and rarely have problems. On the other hand, we do try to keep things separate as far as what people are working on... Two Years Later: We use GIT now, and now this system is actually quite reasonable.

  Read the article

• Release management with a distributed version control system

  - by See Sharp Cheddar

  We're considering a switch from SVN to a distributed VCS at my workplace. I'm familiar with all the reasons for wanting to using a DVCS for day-to-day development: local version control, easier branching and merging, etc., but I haven't seen that much that's compelling in terms of managing software releases. Here's our release process: Discover what changes are available for merging. Run a query to find the defects/tickets associated with these changes. Filter out changes associated with "open" tickets. In our environment, tickets must be in a closed state in order to merged with a release branch. Filter out changes we don't want in the release branch. We are very conservative when it comes to merging changes. If a change isn't absolutely necessary, it doesn't get merged. Merge available changes, preferably in chronological order. We group changes together if they're associated with the same ticket. Block unwanted changes from the release branch (svnmerge block) so we don't have to deal with them again. Sometimes we can be juggling 3-5 different milestones at a time. Some milestones have very different constraints, and the block list can get quite long. I've been messing around with git, mercurial and plastic, and as far as I can tell none of them address this model very well. It seems like they would work very well when you have only one product you're releasing, but I can't imagine using them for juggling multiple, very different products from the same codebase. For example, cherry-picking seems to be an afterthought in mercurial. (You have to use the 'transplant' command). After you cherry-pick a change into a branch it still shows up as an available integration. Cherry-picking breaks the mercurial way of working. DVCS seems to be better suited for feature branches. There's no need for cherry-picking if you merge directly from a feature branch to trunk and the release branch. But who wants to do all that merging all the time? And how do you query for what's available to merge? And how do you make sure all the changes in a feature branch belong together? It sounds like total chaos. I'm torn because the coder in me wants DVCS for day-to-day work. I really want it. But I fear the day when I have to put the release manager hat and sort out what needs to be merged and what doesn't. I want to write code, I don't want to be a merge monkey.

  Read the article

• Sharing the same file between different projects

  - by selsine

  Hi Everyone, For version control we currently use Visual Source Safe and are thinking of migrating to another version control system (SVN, Mercurial, Git). Currently we use Visual Source Safe's "Shared" file feature quite heavily. This allows us to share code between design and runtimes of a single product, and between multiple products as well. For example: **Product One** - Design Login.cpp Login.h Helper.cpp Helper.h - Runtime Login.cpp Login.h Helper.cpp Helper.h **Product Two** - Design Login.cpp Login.h - Launcher Login.cpp Login.h - Runtime Login.cpp Login.h In this example Login.cpp and Login.h contain common code that all of our projects need, Helper.cpp and Helper.h is only used in Product One. In Visual Source Safe they are shared between the specific projects, which means that whenever the files are updated in one project they are updated in any project they are shared with. This is a simple example but hopefully it explains why we use the shared feature: to reduce the amount of duplicated code and ensure that when a bug is fixed all projects automatically have access to the new fixed code. After researching alternatives to Visual Source Safe it seems that most version control systems do not have the idea of shared files, instead they seem to use the idea of sub repositories. (http://mercurial.selenic.com/wiki/subrepos http://svnbook.red-bean.com/en/1.0/ch07s03.html) My question (after all of that) is about what the best practices for achieving this are using other version control systems? Should we restructure our projects so that two copies of the files do not exist and an include directory is used instead? e.g. Product One Design Login.cpp Login.h Runtime Login.cpp Login.h Common Helper.cpp Helper.h This still leaves what to do with Login.cpp and Logon.h Should the shared files be moved to their own repository and then compiled into a lib or dll? This would make bug fixing more time consuming as the lib projects would have to be edited and then rebuilt. Should we use externals or sub repositories? Should we combine our projects (i.e. runtime, design, and launcher) into one large project? Any help would be appreciated. We have the feeling that our project design has evolved based on the tools that we used and now that we are thinking of switching tools it's difficult for us to see how we can best modify our practices. Or maybe we are the only people are there doing this...? Also, we use Visual Studio for all of our stuff. Thanks.

  Read the article

• Can't get MySQL to install

  - by James Marthenal

  I'd like to think I know what I'm doing in a Unix shell but maybe not. I made a mistake in a configuration file for MySQL, so I decided to just uninstall it and then reinstall it, so I did: sudo apt-get --purge remove mysql-server mysql-server-5.0 mysql-client The files were deleted, so I then tried to install it, but it didn't ask me for a root password or anything else, so I uninstalled it using the above command again and then did sudo rm -rf /etc/mysql sudo rm /etc/init.d/mysql sudo rm -rf /var/lib/mysql* I then restarted the computer then installed it again: sudo apt-get install mysql-server mysql-client It asked for a root password, and everything looked like it would work, until I saw this: $ sudo apt-get install mysql-server mysql-client Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 Suggested packages: tinyca The following NEW packages will be installed: mysql-client mysql-server mysql-server-5.0 0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.7MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-client mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.28101": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.28101 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 160284 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up mysql-client (5.0.51a-24+lenny5) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Now I can't seem to figure out what to do. I just want to get a clean MySQL installation at this point. I'm running the latest stable release of Debian. All help is appreciated—thanks! Edit: I looked at this similar question, which suggests that I uninstall mysql-common, but when I try to do so I see: The following packages will be REMOVED: apache2 apache2-mpm-prefork apache2-utils apache2.2-common git-svn libapache2-mod-php5 libapache2-mod-python libapache2-svn libaprutil1 libdbd-mysql-perl libdbd-mysql-rubygem libmysql-ruby libmysql-ruby1.8 libmysql-rubygem libmysqlclient15-dev libmysqlclient15off librdf-perl librdf0 libserf-0-0 libsvn-perl libsvn1 mysql-client-5.0 mysql-common mytop ndn-apache22-php5 ndn-apache22-svn ndn-interpreters ndn-lighttpd ndn-netsaint-plugins ndn-perl-modules ndn-php5-cgi ndn-php5-xcache ndn-php53 ndn-php53-suhosin ndn-rubygems php5 php5-mcrypt php5-mysql proftpd proftpd-mod-mysql python-django python-mysqldb python-subversion python-svn subversion subversion-tools trac zendoptimizer 0 upgraded, 0 newly installed, 48 to remove and 1 not upgraded. Eeek! Any suggestions?

  Read the article

• Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

  - by user60375

  Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

  Read the article

• Rails requires Rubygems but I have the gems

  - by fogonthedowns

  Update I notice that which ruby and whereis ruby are different locations which ruby /opt/local/bin/ruby whereis ruby /usr/bin/ruby I recently upgraded ruby to ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10] and I think I broke rails. When I attempt to load rails. I get an odd message. Please help! $ ruby script/server Rails requires RubyGems = 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ rails -v Rails 3.0.0.beta $ gem -v 1.3.6 $ which gem /usr/bin/gem $ whereis gem /usr/bin/gem $ which rails /usr/bin/rails $ whereis rails /usr/bin/rails $ /usr/bin/gem -v 1.3.6 $ /usr/bin/rails -v Rails 3.0.0.beta $ ruby script/console Rails requires RubyGems >= 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ gem list rails *** LOCAL GEMS *** rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) $ gem list *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.0.beta, 2.3.5, 2.2.2, 1.3.6) actionpack (3.0.0.beta, 2.3.5, 2.2.2, 1.13.6) actionwebservice (1.2.6) activemerchant (1.4.1) activemodel (3.0.0.beta) activerecord (3.0.0.beta, 2.3.5, 2.2.2, 1.15.6) activerecord-tableless (0.1.0) activeresource (3.0.0.beta, 2.3.5, 2.2.2) activesupport (3.0.0.beta, 2.3.5, 2.2.2, 1.4.4) acts_as_ferret (0.4.3) arel (0.2.pre) authlogic (2.1.3) builder (2.1.2) bundler (0.9.3) calendar_date_select (1.15) capistrano (2.5.2) cgi_multipart_eof_fix (2.5.0) chronic (0.2.3) columnize (0.3.1) compass (0.8.17) daemons (1.0.10) dnssd (0.6.0) erubis (2.6.5) fastercsv (1.5.0) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.6) flay (1.4.0) flog (2.4.0) gbarcode (0.98.16) gem_plugin (0.2.3) git (1.2.5) haml (2.2.15) haml-edge (2.3.100) highline (1.5.0) hoe (2.4.0) hpricot (0.6.164) i18n (0.3.3) javan-whenever (0.3.7) jeweler (1.4.0) jscruggs-metric_fu (1.1.5) json_pure (1.2.0) libxml-ruby (1.1.2) linecache (0.43) mail (2.1.2) mechanize (0.9.3) memcache-client (1.7.8) mime-types (1.16) mislav-will_paginate (2.3.11) mocha (0.9.7) mojombo-chronic (0.3.0) mongrel (1.1.5) needle (1.3.0) net-scp (1.0.1) net-sftp (2.0.1, 1.1.1) net-ssh (2.0.4, 1.1.4) net-ssh-gateway (1.0.0) nifty-generators (0.3.0) nokogiri (1.4.0) openrain-action_mailer_tls (1.1.3) passenger (2.2.5) polyglot (0.2.9) prawn (0.6.3) prawn-core (0.6.3) prawn-format (0.2.3) prawn-layout (0.3.2) prawn-security (0.1.1) rack (1.1.0, 1.0.1) rack-mount (0.4.5) rack-test (0.5.3) rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) railties (3.0.0.beta) rake (0.8.7, 0.8.3) rake-compiler (0.6.0) RedCloth (4.1.1) reek (1.2.6) relevance-rcov (0.9.2.1) rmagick (2.12.2) roodi (2.1.0) rsl-stringex (1.0.3) rspec (1.2.9) rspec-rails (1.2.9) ruby-debug (0.10.3) ruby-debug-base (0.10.3) ruby-openid (2.1.2) ruby-yadis (0.3.4) ruby2ruby (1.2.4) ruby_parser (2.0.4) rubyforge (2.0.3) rubygems-update (1.3.6, 1.3.5) rubynode (0.1.5) searchlogic (2.3.9) sexp_processor (3.0.3) spree (0.9.4) sqlite3-ruby (1.2.5, 1.2.4) termios (0.9.4) test-unit (2.0.5) text-format (1.0.0) text-hyphen (1.0.0) thor (0.13.0) tlsmail (0.0.1) topfunky-gruff (0.3.5) treetop (1.4.3) tzinfo (0.3.16) xmpp4r (0.4)

  Read the article

• Sharing the same `ssh-agent` among multiple login sessions

  - by intuited

  Is there a convenient way to ensure that all logins from a given user (ie me) use the same ssh-agent? I hacked out a script to make this work most of the time, but I suspected all along that there was some way to do it that I had just missed. Additionally, since that time there have been amazing advances in computing technology, like for example this website. So the goal here is that whenever I log in to the box, regardless of whether it's via SSH, or in a graphical session started from gdm/kdm/etc, or at a console: if my username does not currently have an ssh-agent running, one is started, the environment variables exported, and ssh-add called. otherwise, the existing agent's coordinates are exported in the login session's environment variables. This facility is especially valuable when the box in question is used as a relay point when sshing into a third box. In this case it avoids having to type in the private key's passphrase every time you ssh in and then want to, for example, do git push or something. The script given below does this mostly reliably, although it botched recently when X crashed and I then started another graphical session. There might have been other screwiness going on in that instance. Here's my bad-is-good script. I source this from my .bashrc. # ssh-agent-procure.bash # v0.6.4 # ensures that all shells sourcing this file in profile/rc scripts use the same ssh-agent. # copyright me, now; licensed under the DWTFYWT license. mkdir -p "$HOME/etc/ssh"; function ssh-procure-launch-agent { eval `ssh-agent -s -a ~/etc/ssh/ssh-agent-socket`; ssh-add; } if [ ! $SSH_AGENT_PID ]; then if [ -e ~/etc/ssh/ssh-agent-socket ] ; then SSH_AGENT_PID=`ps -fC ssh-agent |grep 'etc/ssh/ssh-agent-socket' |sed -r 's/^\S+\s+(\S+).*$/\1/'`; if [[ $SSH_AGENT_PID =~ [0-9]+ ]]; then # in this case the agent has already been launched and we are just attaching to it. ##++ It should check that this pid is actually active & belongs to an ssh instance export SSH_AGENT_PID; SSH_AUTH_SOCK=~/etc/ssh/ssh-agent-socket; export SSH_AUTH_SOCK; else # in this case there is no agent running, so the socket file is left over from a graceless agent termination. rm ~/etc/ssh/ssh-agent-socket; ssh-procure-launch-agent; fi; else ssh-procure-launch-agent; fi; fi; Please tell me there's a better way to do this. Also please don't nitpick the inconsistencies/gaffes ( eg putting var stuff in etc ); I wrote this a while ago and have since learned many things.

  Read the article

• Scenarios for Bazaar and SVN interaction

  - by Adam Badura

  At our company we are using SVN repository. I'm doing programming from both work (main place) and home (mostly experiments and refactoring). Those are two different machines, in different networks and almost never turned on at the same time (after all I'm either at work or at home...) I wanted to give a chance to some distributed version control system and solve some of the issues associated with SVN based process and having two machines. From git, Mercurial and Bazaar I chose to start with Bazaar since it claims that it is designed do be used by human beings. Its my first time with distributed system and having nice and easy user interface was important for me. Features I wanted to achieve were: Being able to update from SVN repository and commit to it. Being able to commit locally steps of my work on a task. Being able to have few separate tasks at the same time in their own local branches. Being able to share those branches between my work and home computer. As a means of transport between work and home computer I wanted to use a pen-drive. Company server will not work since I may not instal there anything. Neither will work a web service repository as I may not upload source code to web (especially if it would be public which seems to be a common case in free web services). This transport should be Bazaar-based (or what ever else I will end with) so it can be done more or less automatically but manual copying and pasting some folders or generating patch files (providing they would work - I have bad experience with patch files in SVN) would work as well if there is no better solution. Yet the pen-drive should only be used for transportation. I do not want to edit or build there. I tried following Bazaar guidelines for integration with SVN. But I failed. I tried both bzr svn-import and bzr checkout providing URL from my repository as both https://... and svn+https://.... In some cases it had some issues with certificates but the output specified argument to ignore them so I did that. Sometimes it asked me to log in (in other cases maybe it remembered... I don't know) which I did. All were running very slow (this could be our server issue) and at some point were interrupted due to connection interruption (this almost for sure is our server issue: it truncates the connection after some time). But since (as opposed to SVN) restarting starts a new rather than from point where it was interrupted I was unable to reach all the ~19000 revisions (ending usually somewhere around 150). What and how should I do with Bazaar? Is is possible to somehow import SVN repository from the local checkout (so that I do not suffer the connection truncation)? I was told that a colleague that used to work with us has done something similar (importing SVN repository with full history) with Mercurial like in no time. So I'm seriously considering now trying Mercurial even if only to see if that will work. But also what are your general guidelines to achieve the listed features?

  Read the article

• Why doesn't this for loop work?

  - by evilsoup

  This is on Ubuntu 12.04 I'm trying to figure out how to get ffmpeg to do a batch conversion of FLACs to MP3, recursively. If I cd into a directory and use for f in *.flac; do ffmpeg -i "$f" -c:a libmp3lame -q:a 2 "${f/%flac/mp3}"; done that works perfectly fine. However, when I try this, it doesn't work: for f in "$(find . -type f -name *.flac)"; do ffmpeg -i "$f" -c:a libmp3lame -q:a 2 "${f/%flac/mp3}"; done It doesn't even throw up any useful errors (but here is the output anyway, no need to complain): evilsoup@enchantment:~/Music/Jean Sibelius$ for f in "$(find . -type f -name *.flac)"; do ffmpeg -i "$f" -c:a libmp3lame -q:a 2 "${f/%flac/mp3}"; done ffmpeg version git-2012-12-18-b7e085a Copyright (c) 2000-2012 the FFmpeg developers built on Dec 18 2012 19:23:11 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --enable-gpl --enable-libfaac --enable-libfdk-aac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 12.100 / 52. 12.100 libavcodec 54. 80.100 / 54. 80.100 libavformat 54. 49.102 / 54. 49.102 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 28.100 / 3. 28.100 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/02. Symphony No.1.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/03. Symphony No.1.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/stripped2.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/05. Symphony No.1.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/stripped3.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/09. Andante festivo.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/08. Symphony No.3.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/01. Finlandia.flac ./Symphonies 1, 2, 3 & 5 (Oslo Philharmonic Orchestra Conducted by Mariss Jansons) Disc 1/07. Symphony No.3.flac ./Symphonies 1, 2, 3 & 5 I've tested the find command on its own, and it works as expected, so the problem has to be something to do with the interaction between find and for. I'm aware that I could do something with find's -exec option, but I can't find any way to do string substitution as I can with a bash for loop, and I'd rather not have a bunch of file.flac.mp3s to deal with, even if they could be fixed with a simple rename.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127  | Next Page >