Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 126/1834 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

  - by BenA

  I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

  Read the article

• SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

  - by Kendall

  Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• DNAT to 127.0.0.1 with iptables / Destination access control for transparent SOCKS proxy

  - by cdauth

  I have a server running on my local network that acts as a router for the computers in my network. I want to achieve now that outgoing TCP requests to certain IP addresses are tunnelled through an SSH connection, without giving the people from my network the possibility to use that SSH tunnel to connect to arbitrary hosts. The approach I had in mind until now was to have an instance of redsocks listening on localhost and to redirect all outgoing requests to the IP addresses I want to divert to that redsocks instance. I added the following iptables rule: iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 -j DNAT --to-destination 127.0.0.1:12345 Apparently, the Linux kernel considers packets coming from a non-127.0.0.0/8 address to an 127.0.0.0/8 address as “Martian packets” and drops them. What worked, though, was to have redsocks listen on eth0 instead of lo and then have iptables DNAT the packets to the eth0 address instead (or using a REDIRECT rule). The problem about this is that then every computer on my network can use the redsocks instance to connect to every host on the internet, but I want to limit its usage to a certain set of IP addresses only. Is there any way to make iptables DNAT packets to 127.0.0.1? Otherwise, does anyone have an idea how I could achieve my goal without opening up the tunnel to everyone? Update: I have also tried to change the source of the packets, without any success: iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 1.2.3.4 -j SNAT --to-source 127.0.0.1 iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 127.0.0.1 -j SNAT --to-source 127.0.0.1

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Root access on media temple.com dv server

  - by Chris M

  This may be a dumb question. I just purchased dv access at media temple.com. I set up root access as required, set up a root access password. Now, for the life of me I can not figure out how this password gets used. Everywhere i try to use the password it does not work. Even tried to ssh with Putty and that didnt work either. Can somebody possibly explain to me what this root access is and how I use it. Im a newbie just trying to learn something new.

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Windows Server 2008 network speed slow, Xen 3.4.3 HVM ISO

  - by Elliot.Bradshaw

  I've setup a VM running Windows Server 2008 on a host node running Xen 3.4.3-5 and the following kernel: 2.6.18-308.1.1.el5xen #1 SMP Wed Mar 7 05:38:01 EST 2012 i686 i686 i386 GNU/Linux The network speed on the VM is very slow--using the online speed tests I can only get it up to 8-9mbps. The line is 100mbps burstable and the host node has no problem achieving those speeds. If it setup a VM running CentOS, it too has no problems achieving those speeds. I've done some pretty exhaustive troubleshooting, but nothing has helped: New VM installations of Win2k8 do have the same network problem. Upgrading to most recent kernel-xen did not help (2.6.18-308.1.1.el5xen). Upgrading from xen 3.4.0 to xen 3.4.3-5 did not help. Disabling Windows firewall, etc did not help. Changing network card device config from auto negotiation to manually be 100mbps full duplex did not help. Changing the network receive buffer packet size did not help (tried all combos from 64k to 8k). At this point I'm pretty much out of ideas--any help would be appreciated!

  Read the article

• apache-user & root access

  - by ahmedshaikhm

  I want to develop few scripts in php that will invoke following commands; using exec() function service network restart crontab -u root /xyz/abc/fjs/crontab etc. The issue is that Apache executes script as apache user (I am on CentOS 5), regardless of adding apache into wheel or doing good, the bad and the ugly group assignment does not run commands (as mentioned above). Following are my configurations; My /etc/sudoers root ALL=(ALL) ALL apache ALL=(ALL) NOPASSWD: ALL %wheel ALL=(ALL) ALL %wheel ALL=(ALL) NOPASSWD: ALL As I've tried couple of combination with sudoer & httpd.conf, the recent httpd.conf look something as follows; my httpd.conf User apache Group wheel my PHP script exec("service network start", $a); print_r($a); exec("sudo -u root service network start", $a); print_r($a); Output Array ( [0] => Bringing up loopback interface: [FAILED] [1] => Bringing up interface eth0: [FAILED] [2] => Bringing up interface eth0_1: [FAILED] [3] => Bringing up interface eth1: [FAILED] ) Array ( [0] => Bringing up loopback interface: [FAILED] [1] => Bringing up interface eth0: [FAILED] [2] => Bringing up interface eth0_1: [FAILED] [3] => Bringing up interface eth1: [FAILED] ) Without any surprise, when I invoke restart network services via ssh, using similar user like apache, the command successfully executes. Its all about accessing such commands via HTTP Protocol. I am sure cPanel/Plesk kind of software do use something like sudoer or something and what I am trying to do is basically possible. But I need your help to understand which piece I am missing? Thanks a lot!

  Read the article

• Proxy to restrict access to certain websites

  - by ChrisRamakers

  Hi all, I'm looking for a solution that allows our office server to function as a proxy that blocks access to certain websites for certain LAN ip's. The solution i'm looking for has to meet these requirements: run on ubuntu server restrict access to certain websites based on a LAN ip (eg: shut out xxx.com for 192.168.1.152) restrict access to a website based on the website url (eg: shut out *.facebook.com) easily configurable (preferably through a web interface, our office manager should be able to operate it thus no commandline fu if possible) preferably opensource Thanks for your time!

  Read the article

• Cannot SVN checkout when anon-access = none

  - by sKIPper76

  When I have anon-access = write Everything works fine. When I change svnserve.conf to: anon-access = none auth-access = write And uncomment password-db and authz-db AND add user in authz with rw AND put username/password in passwd, nothing works. Eclipse keeps giving me a "Cannot map the project with svn provider" error. I have given all the files under conf 777. Any ideas what's wrong?

  Read the article

• two computers on same network cannot ping eachother nor view NetBios resources

  - by slava

  I'd like to find out the problem of my network configuration I have network configuration is like in this diagram: The problem is between laptop1 and laptop2. At first I thought it was samba server problem. I was configuring samba server on one of the laptops and I wasn't able to access the shares from the second laptop no matter what I was doing. After installing/removing/configuring samba-server a couple of times I realized that the problem resides somewhere else. Laptop configurations: - Laptop1: ubuntu 12.04 - Laptop2: Windows 7/ ubuntu 12.04 ( dual boot ) - Server : ubuntu 12.04 When I do "ping 192.168.0.10" from laptop2, I get "Destination host unreachable". The same situation is when I ping in other direction. When I access Laptop1 shares from Laptop2, having windows 7 loaded, I get the error message: "Error code: 0x80070035 The network path was not found." When I ping "server" or "router" or "wifi router" from any of laptops I get a reply. The same with windows shares, I am able to access "server"s shares from Windows and Ubuntu, from any of my laptops. Netbios can't function correctly, that's obvious, I am unable to access windows shares between laptops. I assume that on "wifi router" is a miss-configuration, but I can't find what specifically. The "Wifi router" works as Hub + wifi, it is connected to "router" not in WAN port but in LAN1. Please, help me correctly configure the router to make them see each-other, or at least make NetBios work correctly, between laptops, to be able to access windows shares. Thanks!

  Read the article

• Mirror a Dropbox repository in Sharepoint and restrict access

  - by Dan Robson

  I'm looking for an elegant way to solve the following problem: My development team uses Dropbox for sharing documents amongst our immediate group. We'd like to put some of those documents into a SharePoint repository for the larger group to be able to access, as granting Dropbox access to the group at large is not ideal. However, we'd like to continue to be able to propagate changes to the SharePoint site simply by updating the files in Dropbox on our local client machines, and also vice versa - users granted access on SharePoint that update files in that workspace should be able to save their files and the changes should appear automatically on our client PC's. I've already done the organization of the folders so that in Dropbox, there exists a SharePoint folder that looks something like this: SharePoint ----Team --------Restricted Access Folders ----Organization --------Open Access Folders The Dropbox master account and the SharePoint master account are both set up on my file server. Unfortunately, Dropbox doesn't seem to allow syncing of folders anywhere above the \Dropbox\ part of the file system's hierarchy - or all I would have to do is find where the Sharepoint repository is maintained locally, and I'd be golden. So it seems I have to do some sort of 2-way synchronization between the Dropbox folder on the file server and the SharePoint folder on the file server. I messed around with Microsoft SyncToy, but it seems to be lacking in the area of real-time updating - and as much as I love rsync, I've had nothing but bad luck with it on Windows, and again, it has to be kicked off manually or through Task Scheduler - and I just have a feeling if I go down that route, it's only a matter of time before I get conflicts all over the place in either Dropbox, SharePoint, or both. I really want something that's going to watch both folders, and when one item changes, the other automatically updates in "real-time". It's quite possible I'm going down the entirely wrong route, which is why I'm asking the question. For simplicity's sake, I'll restate the goal: To be able to update Dropbox and have it viewable on the SharePoint site, or to update the SharePoint site and have it viewable in Dropbox. And since I'm a SharePoint noob, I'll also need help hiding the "Team" subfolder from everyone not in a specific group in AD.

  Read the article

• Read access to Active Directory property (uSNCreated)

  - by Tom Ligda

  I have an issue with read access to the uSNCreated property when doing LDAP searches. If I do an LDAP search with a user that is a member of the Domain Admins group (UserA), I can see the uSNCreated property for every user. The problem is that if I do an LDAP search with a user (UserB) that is not a member of the Domain Admins group, I can see the uSNCreated property for some users (UserGroupA) and not for some users (UserGroupB). When I look at the users in UserGroupA and compare them to the users in UserGroupB, I see a crucial difference in the "Security" tab. The users in UserGroupA have the "Include inheritable permissions from this object's parent" unchecked. The users in UserGroupB have that option checked. I also noticed that the users in UserGroupA are users that were created earlier. The users in UserGroupB are users created recently. It's difficult to quantify, but I estimate the border between creation time between the users in UserGroupA and UserGroupB is about 6 months ago. What can cause the user creation to default to having that security property checked as opposed to unchecked? A while back (maybe around 6 months ago?) I changed the domain functional level from Windows Server 2003 to Windows Server 2008 R2. Would that have had this effect? (I can't exactly downgrade the domain functional level to test it out.) Is this security property actually the cause of the issue with read access to the uSNChanged property on LDAP searches? It seems correlated, but I'm not sure about causation. What I want in the end is for all authenticated users to have read access to the uSNCreated property for all users when doing an LDAP search. I would also be OK if I could grant read access for that property to an AD group. Then I can control access by adding members to the group.

  Read the article

• Windows 7 - How to access my documents from Windows 8 (dual boot)

  - by msbg

  I am dual booting Windows 7 and Windows 8 on two different partitions of the same drive: Win7: (C:) Win8: (D:) I am trying to get access to my Win7 user folder (C:\Users\Mason) in order to access my Win7 documents folder (C:\Users\Mason\Documents) from Windows 8. When I try to on Windows 8, I get an error message saying "You don't have permission to access this folder. Click here to permanently get access to this folder". When I click, the progress bar in Windows Explorer slowly moves to the maximum and disappears. When I try opening the folder, I get the same error message. When editing security permissions for the folder in Windows 8, Explorer freezes. I do not know how to remove the restrictions from Windows 7. I checked the Windows 8 user folder (D:\Users\Mason) and it had the group or user name: "S-1-5-21-936898901-3363470404-1273668825-1001". I tried copying and pasting it into the Win7 User Folder Permissions, but got the error "An object with the following name cannot be found". How would I access my folders?

  Read the article

• Copying SD Cards with "LaCie d2 Network"

  - by rjstelling

  The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

  Read the article

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• Allow access from outside network with dmz and iptables

  - by Ivan

  I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

  Read the article

• Windows clients unable to access Samba share on AD joined Linux box every 7 days

  - by Hassle2

  The problem: Every 7 days, 2 Windows Servers are unable to access a SMB/CIFS share. It will start working after a handful of hours. The environment: OpenFiler Linux box joined to 2003 AD Domain Foreground app on Win2003 server access the SMB/CIFS share with windows credentials Another process on Win2008 access the share via SQL Server with windows credentials The Samba version on the Linux box is 3.4.5. Security is set to ADS wbinfo and getent return back expected users and groups Does not look to be a double hop issue as it's always the 2 accounts, regardless of the calling user. There is a DNS entry in both forward and reverse lookup zone for the linux box The linux box's computer object in active directory shows that it was modified around/at the same time that the two clients started failing to access the share Trying to access the share via IP works when by name does not Rebooting the Windows server takes care of it (it's production and only restarted it once) Restarting smbd, winbind, nmbd had no effect Error in samba log for the client in question: smbd/sesssetup.c:342(reply_spnego_kerberos) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! The Question: Does this look like the machine account password is changing (hence the AD object showing the updated modified date) or are the two windows clients unable to request a new ticket that works against this linux box?

  Read the article

• Mapped networkdrive on logout

  - by Robuust

  I'm using a script to keep a mapped networkconnection alive, but ofcourse the mapped connection is gone when I logout. The point is now, that I'm running this on Windows Server 2008 R2, where I use remote desktop to login on the administrator account. However, it should remain logged in and not remove the mapped connection as this script takes care of not logging out on MS office 365 sharepoint. Is there a way to keep the mapped networklocation (L:) available after logout? So the script can run to remain the connection? # Create an IE Object and navigate to my SharePoint Site $ie = New-Object -ComObject InternetExplorer.Application $ie.navigate('https://xxx.sharepoint.com/') # Don't need the object anymore, so let's close it to free up some memory $ie.Quit() # Just in case there was a problem with the web client service # I am going to stop and start it, you could potentially remove this # part if you want. I like it just because it takes out a step of # troubleshooting if I'm having problems. Stop-Service WebClient Start-Service WebClient # We are going to set the $Drive variable here, this is just # going to tell the command what drive letter to map you can # change this to whatever you want (if you change it to a # drive that is already mapped it will overwrite it, so be careful. $Drive = "L:" # You can change the drive destiniation to whatever you want, # it has to be a document library or folder of course. $DrvDest = "https://xxx.sharepoint.com/files/" # Here is where we create the object to map the network drive and # then map the network drive $net = New-Object -ComObject WScript.Network; $net.mapnetworkdrive($Drive,$DrvDest) # That is the end of the script, now schedule this with task # scheduler and every so often and you should be set.

  Read the article

• Access Denied on a Drive where All Users list have been deleted in Security Tab

  - by darkstar13

  Hi All, (System is Windows 7 x64) I wanted to restrict access of other people in a certain drive of my computer (Harddisk 1 is partitioned to C & D; I want to restrict Drive D). What I did was go to the Security Tab (under Drive Properties) and remove the All Users entry. My account is an administrator account. I left only Systems and Administrator on the list. However, when I tried to access drive D, I got an Access Denied error, and Security Tab is already missing. I tried to edit Local Group Policy; it does not work. Take Ownership is not available for the Drive as well, but I see it enabled if I select files / folders. Please help. Thanks. Also, I am wondering why, as an Administrator, have my access to that drive denied.

  Read the article

• VPN Connects with local access only

  - by user20102

  I have Windows Server 2008 and I have set up a VPN. When a user logs into their VPN they can not view the internet. It comes up as local access only on the the client PC. On the server when I go to the Network And Sharing Centre it displays (Network) with local and internet below it has the RAS Dial-in interface and it displays as local only there as well. I want all users that connect to my VPN to have internet access (full access). If anyone can help me it would be appreciated. Also I've activated dial-in properties and I've done it via policy who can access the VPN and internet. It still doesn't work, but there is a connection but just local only. Thanks

  Read the article

• Unable to outside access service from inside LAN

  - by erotsppa

  I have a weird port forwarding problem. I tried to open my port 22 to the outside network. I was able to access it as long as I am not inside the LAN. I can access it from my office for example. But from within the LAN, I can access the port using the local ip, but I can't access the port using the external IP. It's as if the router is blocking the loopback. I've check all my router settings, turned off anything firewall/filtering related. Any ideas?

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >