Search Results

Search found 30486 results on 1220 pages for 'network level auth'.

Page 126/1220 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• Host data transfer limit calculations and network protocol headers

  - by UpTheCreek

  OK, this might be a really stupid question, but... I'm building a web app that utilises websockets. There's fairly rapid messaging going on, so I've been taking a look at the network traffic with wireshark, to see if there's any way of reducing the amount of data we are sending over the wire, and hence costs. A typical message has approx 150 byte data payload, and according to wireshark the lower layer stuff takes up about: Ethernet: 14 bytes IP: 20 Bytes TCP: 20 Bytes My question is, are these network headers included in data transfer calculations? What about TCP ACK messages? (another 54 bytes according to wireshark) This may seem petty, but because we have so much messaging going on, and because the payload is a similar size to these headers, it's significant.

  Read the article

• Access to a network server without port forwarding

  - by SdevDavid

  I have a network with the following structure. The server in PC2 is simple socket server TCP in 8080 port. I need to access to PC2 from other external network by socket client. This socket client knows the public IP (85.xxx.xxx.x), the private IP (192.168.0.21) and the port. How I can access PC2 without port forwarding on the router? If possible, I would like to have a reference in any programming language of this case.

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Windows Server 2003 VPN and Local network

  - by depo

  I have some problems reaching local network , where VPN Windows 2003 server stands. I have a network, which has a VPN server (LAN ip 10.0.0.201). I created a VPN server on that server with different subnet for VPN users (10.0.5.0). After VPN connection is initiated , i am able to acces only 10.0.0.201, but not other PC, which belongs to that network ( all i need to access 10.0.0.203 and 10.0.0.208). I think i need to add somethink to static route table, or not? C:\Documents and Settings\Administratorroute PRINT IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.0.254 10.0.0.201 10 10.0.0.0 255.0.0.0 10.0.0.201 10.0.0.201 10 10.0.0.201 255.255.255.255 127.0.0.1 127.0.0.1 10 10.0.5.1 255.255.255.255 127.0.0.1 127.0.0.1 50 10.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 240.0.0.0 10.0.0.201 10.0.0.201 10 255.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 1 Default Gateway: 10.0.0.254 Persistent Routes: None C:\Documents and Settings\Administratoripconfig /all PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.0.5.1 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection Physical Address. . . . . . . . . : 00-0E-0C-3D-C9-51 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.0.0.201 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 10.0.0.254 DNS Servers . . . . . . . . . . . : 127.0.0.1 Primary WINS Server . . . . . . . : 10.0.0.201 NetBIOS over Tcpip. . . . . . . . : Disabled VPN Client PPP adapter VPN Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VPN Connection 2 Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.5.4(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.0.0.201 Primary WINS Server . . . . . . . : 10.0.0.201 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• Sharing a Win7 Mappable Network Drive in Server 2008 R2

  - by Jason

  I have a ghetto windows server 2008 r2 server that I basically run as a file server. I would like to create a share that can be mapped as a network drive by a Windows 7 Pro PC. How can I do this? I've gathered that I probably need to setup a VPN network on my Server 2008 R2 box and then grant my Win7 PC access. Is there anything else I am overlooking or is there a better way to do this? I basically just want to be able to edit xml files on my Win7 PC without having to ftp them back and forth.

  Read the article

• Windows 8.1 keeps prompting for Network Share Credentials after every log on or restart

  - by Peret del Trunfa

  I have a Network drive Shared in a Workgroup with 3 clients. Two clients with Windows 7 have persistent connections to the Share. No issues with those two. My windows 8.1 client keeps prompting for credentials at every restart / log on. I spent hours looking around for a solution: I have stored cred in cred manager, and tried every possible combination (WORKGROUP\user , COMPUTERNAME\user, user, .. and so on). I have changed NT and NTLM negotiation in policy manager. I've compared the settings under GPO network security with a working win 7 computer, everything is pretty much the same. -I've captured Wireshark to see SMB negotiation process, honestly I see the messages flowing around, and the share sending AUTH DENIED.. which means is how the 8.1 client formats the request.... that makes the share reject it.. Now I still don't really know why. Any ideas would be appreciated.

  Read the article

• two shops network

  - by edward

  okay so, I just opened up two shops in my hometown. The two stores is about 6 blocks apart, connecting them by wire is not really feasible in cost wise. What kind of network topology should I use for my small shops, there will be 5 computers, one is the sales computer ,another 4 as mentioned is the guest computer. I want the sales and guest computers network to be seperated. Both shops have same computers. The guest computers serves up simple website that has my shop catalog on it, I'm thinking of using a web server. So, how am i suppose to setup these networks, im planning to add in more computers in the future. Is it I need to station a single server at a shop, and all the computer connected to it? or is there any more effective methods? I'm no networking expert, would love to hear some advice.

  Read the article

• VPC on Windows 7 very slow network

  - by Shigg

  I have a Windows 2003 virtual machine which I use for website testing. I've just installed Windows 7 and am using the new version VPC (not xp mode). When I try to copy a file - I need to copy some big databases across - I get a file copy speed of about 20k per sec. Copying from one PC to another on the real network transfers files at 13mb per second. Any ideas what may be causing this? I've turned off differential network compression on win 7. The Virtual HD is on a seperate physical drive to the OS. Running Windows 7 64 bit on a dual xeon with 16gb ram and 10,000 rpm drives. Tried installing VPC 2007 but windows blocks it running saying its not compatable. Many thanks for any ideas.

  Read the article

• hosting website on a private network

  - by razor

  i'm currently running a website off 3 linux servers. I'd like to setup a private network and only allow port 80 traffic to one of the servers. I'd also like to setup a vpn so only I can access the servers via ssh or any port for developing/debugging. How hard is this to setup and what do I need to get? Do enterprise/commercial routers have vpn functionality built in? how do I handle DNS? eg- www.mydomain.com would need to point to the router, which forwards traffic to the webserver. Do I set the A record to the router, and somehow tell the router which server to send the http request to? And how would I make server1.mydomain.com resolve to server1 within the private network (without editing host files)? Would I need to run my own DNS (eg- powerdns?) to do this?

  Read the article

• "The network path was not found" - shortening the delay before Windows tries again

  - by Harry Johnston

  If I try to connect (over Windows file sharing) to a machine that has gone to sleep, I get a timeout followed by "The network path was not found". If I then wake the machine and try again, I still get "The network path was not found" because the connection failure has been cached. If I wait a while (about 30 seconds?) and then try again I can connect successfully. I understand this behaviour. My question is: is there any way to shorten the delay before I can try the connection again?

  Read the article

• MSI Install over network with Admin Rights

  - by user45237

  I have been asked to install software.msi over a network to a group of users as they logon. My issue is that they also need admin rights to install this software. I have tried using runas command but it askes the user to input a password. I have also tried using MSIEXEC but still stating user has not enough privalages. Giving users admin rights accross the network or locally is also no an option. Help please! Andy.

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• FTP blocked by firewall on windows 8.1 update 1 public network

  - by amik

  I've recently upgraded to Windows 8.1 u1. I connect to VPN to one of my projects, over which I connect to FTP server (using Total Commander 8.51a). Now, when I try to connect, Total Commander hangs on "Download" (in case of passive connection on "PASV" command). I've figured out that the problem is somehow caused by firewall, because it works if I disable firewall or I set the VPN network location to "private" (which I don't want, it is not enough trusted network for me) I tried to add total commander to firewall exception for total commander, both to inbound and outbound rule, but with no success. I have no more ideas how to configure the firewall to make FTP work properly, can you plese help me? thanks in advance.

  Read the article

• Auto-detect proxy settings for the network

  - by user42891

  Firefox browser contains network settings under Tools--Options--Advanced--Network--Settings and there is an option to do auto detect proxy settings, how should I enable this? Currently this is manually configured and its possible for users to bypass and use the internet directly. We use a variety of browsers (firefox, IE, chrome, safari, opera) on win xp, win 2003, win vista machines. How should I enable this so that the end user cannot manipulate the settings on his browser to by pass security. I have configured a squid cache proxy server for this purpose.

  Read the article

• Network location is not on the Domain

  - by Kyle Brandt

  I have a computer joined to the domain, but it doesn't view the network "location" as being part of the domain. I have tried removing and rejoining the domain and this doesn't help: Other computers in the same network don't have this problem. I have also tried several different icons, including both the train and the airplane which doesn't seem to make a difference. At least using nslookup, the server seems to have connectivity with the DCs in the same site. There also seem to be some errors that suggest a NULL domain: Computer: OR-WEB05.ds.stackexchange.com Description: NtpClient was unable to set a domain peer to use as a time source because of failure in establishing a trust relationship between this computer and the '' domain in order to securely synchronize time. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The trust relationship between this workstation and the primary domain failed. (0x800706FD)

  Read the article

• Can't access sub domain from my network [closed]

  - by Maninder

  I am trying to access http://www.abc.xyz.com from my network, but not able to do so. However, http://www.xyz.com is opening fine in my browser. Asked a friend to open abc.xyz.com from his machine(in a different network), its opening fine. Checked my firewall settings as well. There's no such rule to deny the specific site or something that could be denying access to the sub domain. Kindly advise, how I can troubleshoot my problem.

  Read the article

• Small WiFi Network In a Noisy Environment

  - by Sam Skuce

  My company is demoing our network enabled products at big conferences. For this purpose, we would like to be able to set up a small WiFi network in our booth with a range of less than 10 meters. We will only be connecting the device that we are demoing and the iPad or PC running our demo software. I understand that there are conferences that won't allow you to run your own WiFi equipment, but some fairly big ones do (e.g. IMTS, which we were just at). I know that the AP should be encrypted and not broadcast its SSID, but are there additional equipment considerations to deal with the high level of RF noise in such an environment? Is there a particular technology that I should be looking at?

  Read the article

• WIFI connection interfering with Windows Server 2003 Active Directory domain. (How to debug?)

  - by Vinko Vrsalovic

  RELATED: This question has led me to ask this one. I had to change our unnamed crappy ADSL router to a crappy Comtrend CT-5361 WiFi router, now every WiFi connection to the domain doesn't work correctly: Joining the domain is impossible (see related question) Logging into the domain takes ages Authentication usually fails Question: How to debug this and pinpoint the exact problem? I have no enough knowledge on either WiFi networks or on Active Directory to know which connections are made at which stages nor how to check what's happening at the wireless level to compare what should happen to what is happening. I'm looking for resources to learn what should be happening and tools to detect what is actually happening (I expect a sniffer should be enough, but if there are better, more specialized tools, that'd be great).

  Read the article

• Can't access link in network using fully qualified domain name

  - by user1033715

  I have installed windows server 2003 and configured Domain controller (domain name - xyz.com) and DNS service. for that I have configured fully qualified domain name as server.xyz.com also I have installed apache tomcat with port 8080 on that server and accessed link successfully using "http://localhost:8080", "http://ip address of server:8080", "http://server.xyz.com:8080". but its working for local machine, and when I tried to access it from another machine in same network using "http://ip address of server:8080" its worked for me. but when I tried it using fully qualified domain name i.e. "http://server.xyz.com:8080" it's giving me error, "Could not connect to server.xyz.com" Please guide me getting this setup done. I need to be able to access this link "http://ip address of server:8080" as "http://server.xyz.com:8080" outside my network Any suggestion are highly appreciated..

  Read the article

• How to make your apache application accessible within network

  - by guest

  I have a Windows XP machine where I have installed WAMP and made a PHP based web application. I can access the web application from within this machine by using the browser and pointing to: http://localhost/myApp/ --- and the page loads fine. Now I want this site (http://localhost/myApp) to be accessible to all machines within the network (and may be later, to the general public as well). I am quite new to this, how do I make my site accessible to all machines within the network and to the general public in the internet? I tried modifying the httpd.conf file in Apache (WAMP) by changing Listen 80 to Listen 10.10.10.10:80 (where I replaced 10.10.10.10 with the actual IP of this windows xp machine). I also tried "Put Online" feature in WAMP. None seem to work though. How do I make it accessible?

  Read the article

• HP 120 printer network install con windows 7 home

  - by Fusca

  I have a HP-1210 printer connected to a win 7 ultimate edt, this one, the printer-host, is logged to a domain. I also have a Windows 7 home edition (not logged into the domain) and I want to install the hp1210 printer. Other printers in the network (connected to the domain) are currently connected to the printer. In the Win 7 Home I ran the HP1210 installer but it doesn't find the printer over the network. Is this because this win7home is not connected to the domain? Is there any way to manually specify the printer path?

  Read the article

• Citrix has issues resolving network shares

  - by George

  We are having this weird issue with our Citrix (version 4.5) server (sitting on Windows 2003 r2), where a couple users have issues resolving single shared network drive. We use a logon script to map all shared drives. The weird part is that of 3 shared drives, users can access 2, but the 3rd one goes to the old server (even though the logon script points to the new server). And that issues is limited to a few users. I had them log off and re-loggin to no success. It happens just in Citrix. The file server, that is being accessed, is Windows 2008 R2. Like I said we use a logon script to map the network drive. I understand I might be a little confusing, I will gladly reword the post.

  Read the article

• Visual indication of network activity

  - by at.

  is there a simple application which can sit on top of a fullscreen game to give me an indicator of when there is a lot of network activity? I can only seem to find system tray apps or programs which work outside of fullscreen games. Preferably something transparent so i can see through it. A little background info: I used to have my PC sitting sideways on my desk so I can see lights from the network card. The lights stopped working a while ago and all I need is a little blinking application to tell me when there is activity. I do not need a detailed graph or bandwidth usage, just activity notification. I've looked everywhere for something, maybe you guys are better at searching than me.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >