Search Results

Search found 49486 results on 1980 pages for 'remote working'.

Page 131/1980 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

  • CheckPoint/Amazon VPC VPN tunnel working inconsistently

    - by Lee
    First time poster, so please be gentle and correct me if there's Server Fault etiquette I'm missing. We have two CheckPoint edge devices at sites A & B, independently managed, connecting to two Amazon private clouds. In both cases, the two Amazon VPCs are in the same community on the CheckPoint device. A VPN tunnel exists between the two CheckPoint devices as well. Between Sites A & B and the Amazon VPC in Northern Virigina, we are unable to keep more than one tunnel up. Both will come up, but tunnel 2 will drop an hour after initiation and will not come back up while tunnel 1 is up. We believe the 1-hour period is due to IPsec phase 2 renegotiation, but can't be sure. On our side, we see the tunnel 2 remote endpoint as not responding to phase 2 negotiation. Between Sites A & B and the Amazon VPC in Oregon, we have no issues. Both tunnels are up and fail over properly. The CheckPoint gateways are using domain-based VPNs. According to CheckPoint's advice to Amazon, this won't work. Yet, in Oregon, it does. We've pursued this with Amazon and, despite the fact it's working in Oregon, they've refused to troubleshoot with us further. Can anyone suggest anything we can do to try to get this stabilized? Going to route-based VPNs is not an option for us.

    Read the article

  • Fix: Connections to SQL Server 2005 on Windows Vista suddenly stop working

    - by NTulip
    On my Vista machine at work, applications and the SQL Server Management Console work fine connecting to SQL Server 2005. Sometimes they are ok for weeks at a time, sometime for hours and then they stop connecting. I've tried everything to get it to work including the installation of SPII and running the user provisioning tool without any luck. The only way to fix it was to restart. The Error: Connections are refused with the standard error message: Cannot connect to SERVER_NAME\INSTANCE_NAME ------------------------------ ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 The Fix: Stop and restart the Sql Server Browser, Sql Server integration, SQL Server Active Directory Helper services. Works like a charm.

    Read the article

  • Postfix connect timing out remotely, working fine locally

    - by Moritz
    Running Postfix on Debian I cannot connect to send mail any more. It worked until approximately a week ago. I do not recall touching the configuration of the server during that time, which makes it difficult for me to find out what the problem is. When connecting from the server to itself it works fine: root@xxxx:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. ehlo localhost 220 mail.xxxx.de ESMTP Postfix (Debian/GNU) 250-mail.xxxx.de 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. Trying to do the same remotely times out: laptop:~ $ telnet mail.xxxx.de 25 Trying 93.xx.xx.xx... telnet: connect to address 93.xx.xx.xx: Operation timed out telnet: Unable to connect to remote host Configuration is as follows: root@xxxx:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 mailbox_command = mailbox_size_limit = 0 mydestination = localhost.localdomain, localhost.localdomain, localhost myhostname = mail.xxxx.de mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_gid_maps = static:8 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 150 virtual_transport = dovecot Receiving mails is no problem, as is retrieving them remotely. Do you have an idea what I could check next?

    Read the article

  • Server 2008 NAT Internet Not Working

    - by Jack
    I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

    Read the article

  • OpenSWAN KLIPS not working

    - by bonzi
    I am trying to setup IPSec between 2 VM launched by OpenNebula. I'm using OpenSWAN for that. This is the ipsec.conf file config setup oe=off interfaces=%defaultroute protostack=klips conn host-to-host left=10.141.0.135 # Local IP address connaddrfamily=ipv4 leftrsasigkey=key right=10.141.0.132 # Remote IP address rightrsasigkey=key ike=aes128 # IKE algorithms (AES cipher) esp=aes128 # ESP algorithns (AES cipher) auto=add pfs=yes forceencaps=yes type=tunnel I'm able to establish the connection with netkey but klips doesnt work. ipsec barf shows #71: ERROR: asynchronous network error report on eth0 (sport=500) for message to 10.141.0.132 port 500, complainant 10.141.0.135: No route to host [errno 113, origin ICMP type 3 code 1 (not authenticated)] Tcpdump shows 22:50:20.592685 IP 10.141.0.132.isakmp > 10.141.0.135.isakmp: isakmp: phase 1 I ident 22:50:25.602182 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:26.602082 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:27.601985 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 ipsec eroute shows 0 10.141.0.135/32 -> 10.141.0.132/32 => %trap What could be the problem?

    Read the article

  • Routing for remote gateway over VPN in Vista/7 broken?

    - by Raymond
    Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

    Read the article

  • Terminal emulation has stopped working. Garbage escape chars

    - by oligofren
    To enable me to do some remote administration of our servers I started using a terminal emulation program called TouchTerm Pro on my iPhone. While not the smoothest experience, it has allowed me to leave my computer behind when going out of town, which makes the slightly painful experience worthwhile. As of late, the app unfortunately no longer works. Pressing up and down keys after logging on via ssh gives me garbage like ^[[A and ^[[B. Combinations with Ctrl - like you can see in the video - no longer works either. Writing full command lines and executing by the enter key works though. Being able to search my bash history was the difference between a usable app and endless frustration, so getting it to work is essential. The app has (of course) met its end of life, not getting updated anymore. I am not quite sure, which side (client or server) that has to be "fixed"/hacked to make the control sequences work again. But is there something I can do to make it work as intended? You can see a video of TouchTerm in operation here.

    Read the article

  • Mac dev folder missing, SSH not working

    - by SamGoody
    A few days ago, SSH stopped working. When I try logging in a get the following message: PTY allocation request failed on channel 0 stdin: is not a tty fatal: unrecognized command '' Connection to 74.52.61.194 closed. Web searches have shown me that there might be something wrong with /dev/std. But my computer lacks a /dev/ drive. There is an Alias to /dev/ [hidden, but I've revealed hidden files to do this search], but when I try to open it I am told that it cannot find the folder it is aliasing. Now, many a web search tells me that without a dev folder, the computer doesn't work, but it does seem to work, except the SSH. Also, are there any tools that can save my SSH preferences so that I don't have to, each time, type out the username@adrees, password, path all of which are long and complex? Not looking for a Filezilla type client, there are many of those. Looking for a command line like putty, that lets me use bash on the remote client. Am on Macbook Pro, latest version of Tiger.

    Read the article

  • Proper Outlook Free/Busy status when working from home

    - by rwmnau
    Our office (pretty large - about 200 people) has recently started part-time telecommuting. It's only one day/week now, but it's already raised some questions about availability, so I wanted to see how the users here, some of whom I'm sure telecommute to a corporate job, how they set their out of office status. Outlook has four statuses, and here's what I (and most others?) take them to mean: Free: I'm available for meetings Busy: I'm in a meeting or otherwise occupied, and unavailable Tentative: Shy away from scheduling over, but I'm available if needed Out of office: I'm on vacation and unavailable. However, I don't travel for work - do people tend to use this status to mean they're remote, but available for a phone call/bridge? As we begin to telecommute, I'll be available by phone for meetings, but not in person - any meeting can have a conference bridge, but some meetings just need to be in person. I'd like to send the right message about my status - people can schedule meetings with me on my telecommute days, but they should expect me to be on a conference bridge when they do. What status do people use? Does "Out of Office" correctly reflect that you're working from home, even though I perceive this to mean that somebody is on vacation? Maybe I'm the only one confused here, but as a company that's never before done telecommuting of any kind, I'm in the dark about standard practices. Thanks for the insight! Though this isn't a technical question directly, I'm hoping it's still applicable to the group and constructive - if it's not, please close it and accept my apology.

    Read the article

  • Jailkit not locking down SFTP, working for SSH

    - by doublesharp
    I installed jailkit on my CentOS 5.8 server, and configured it according to the online guides that I found. These are the commands that were executed as root: mkdir /var/jail jk_init -j /var/jail extshellplusnet jk_init -j /var/jail sftp adduser testuser; passwd testuser jk_jailuser -j /var/jail testuser I then edited /var/jail/etc/passwd to change the login shell for testuser to be /bin/bash to give them access to a full bash shell via SSH. Next I edited /var/jail/etc/jailkit/jk_lsh.ini to look like the following (not sure if this is correct) [testuser] paths= /usr/bin, /usr/lib/ executables= /usr/bin/scp, /usr/lib/openssh/sftp-server, /usr/bin/sftp The testuser is able to connect via SSH and is limited to only view the chroot jail directory, and is also able to log in via SFTP, however the entire file system is visible and can be traversed. SSH Output: > ssh testuser@server Password: Last login: Sat Oct 20 03:26:19 2012 from x.x.x.x bash-3.2$ pwd /home/testuser SFTP Output: > sftp testuser@server Password: Connected to server. sftp> pwd Remote working directory: /var/jail/home/testuser What can be done to lock down SFTP access to the jail? FWIW, I mostly used this as a guide: http://digitalpatch.blogspot.com.ar/2010/03/openssh-daemon-hardening-part-3-setup.html

    Read the article

  • Windows 7 computer apparently connected to working wireless network but can't access router page or internet

    - by Hemmer
    I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

    Read the article

  • Use Glassfish JMS from remote client

    - by James
    Hi, I have glassfish installed on a server with a JMS ConnectionFactory set up jms/MyConnectionFactory with a resource type or javax.jms.ConnectionFactory. I now want to access this from a client application on my local machine for this I have the following: public static void main(String[] args) { try{ Properties env = new Properties(); env.setProperty("java.naming.factory.initial", "com.sun.enterprise.naming.SerialInitContextFactory"); env.setProperty("java.naming.factory.url.pkgs", "com.sun.enterprise.naming"); env.setProperty("java.naming.factory.state", "com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl"); env.setProperty("org.omg.CORBA.ORBInitialHost", "10.97.3.74"); env.setProperty("org.omg.CORBA.ORBInitialPort", "3700"); InitialContext initialContext = new InitialContext(env); ConnectionFactory connectionFactory = null; try { connectionFactory = (ConnectionFactory) initialContext.lookup("jms/MyConnectionFactory"); } catch (Exception e) { System.out.println("JNDI API lookup failed: " + e.toString()); e.printStackTrace(); System.exit(1); } }catch(Exception e){ e.printStackTrace(System.err); } } When I run my client I get the following output: INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate {org.omg.CORBA.ORBInitialPort=3700, java.naming.factory.initial=com.sun.enterprise.naming.SerialInitContextFactory, org.omg.CORBA.ORBInitialHost=10.97.3.74, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl, java.naming.factory.url.pkgs=com.sun.enterprise.naming} 19-Mar-2010 16:09:13 org.hibernate.validator.util.Version <clinit> INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 19-Mar-2010 16:09:13 org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMS Resource Adapter starting: REMOTE 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMSRA Started:REMOTE 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: enterprise_naming.serialctx_communication_exception 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) JNDI API lookup failed: javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:461) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 8 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) I have looked at a number of posts and have tried a number of things with no success. I can run the following commands on my server: ./asadmin list-jndi-entries UserTransaction: com.sun.enterprise.transaction.TransactionNamingProxy$UserTransactionProxy java:global: com.sun.enterprise.naming.impl.TransientContext jdbc: com.sun.enterprise.naming.impl.TransientContext ejb: com.sun.enterprise.naming.impl.TransientContext com.sun.enterprise.container.common.spi.util.InjectionManager: com.sun.enterprise.container.common.impl.util.InjectionManagerImpl jms: com.sun.enterprise.naming.impl.TransientContext Command list-jndi-entries executed successfully. ./asadmin list-jndi-entries --context jms MyTopic: org.glassfish.javaee.services.ResourceProxy MyConnectionFactory: org.glassfish.javaee.services.ResourceProxy MyQueue: org.glassfish.javaee.services.ResourceProxy Command list-jndi-entries executed successfully. Any help is greatly appreciated. Cheers, James

    Read the article

  • how to send F2 key to remote host using python

    - by sagar
    i have to send F2 key to telnet host how do i send it using python...using getch() i found that this '<' used for F2 key but while sending its not working..i think there will be some way to send special function keys but i am not able to find it..if somebody knows please help me.thanks in advance

    Read the article

  • Creating multiple heads in remote repository

    - by Jab
    We are looking to move our team (~10 developers) from SVN to mercurial. We are trying to figure out how to manage our workflow. In particular, we are trying to see if creating remote heads is the right solution. We currently have a very large repository with multiple, related projects. They share a lot of code, but pieces of the project are deployed by different teams (3 teams) independent of other portions of the code-base. So each team is working on concurrent large features. The way we currently handles this in SVN are branches. Team1 has a branch for Feature1, same deal for the other teams. When Team1 finishes their change, it gets merged into the trunk and deployed out. The other teams follow suite when their project is complete, merging of course. So my initial thought are using Named Branches for these situations. Team1 makes a Feature1 branch off of the default branch in Hg. Now, here is the question. Should the team PUSH that branch, in it's current/half-state to the repository. This will create a second head in the core repo. My initial reaction was "NO!" as it seems like a bad idea. Handling multiple heads on our repository just sounds awful, but there are some advantages... First, the teams want to setup Continuous Integration to build this branch during their development cycle(months long). This will only work if the CI can pull this branch from the repo. This is something we do now with SVN, copy a CI build and change the branch. Easy. Second, it makes it easier for any team member to jump onto the branch and start working. Without pushing to the core repo, they would have to receive a push from a developer on that team with the changeset information. It is also possible to lose local commits to hardware failure. The chances increase a lot if it's a branch by a single developer who has followed the "don't push until finished" approach. And lastly is just for ease of use. The developers can easily just commit and push on their branch at any time without consequence(as they do today, in their SVN branches). Is there a better way to handle this scenario that I may be missing? I just want a veteran's opinion before moving forward with the strategy. For bug fixes we like the general workflow of mecurial, anonymous branches that only consist of 1-2 commits. The simplicity is great for those cases. By the way, I've read this , great article which seems to favor Named branches.

    Read the article

  • Connecting to remote mysql database with API

    - by Ajay
    I am designing a desktop application in C#, which needs to be connected to my online mysql database. I tried to give access in control panel a "%" which means from any IP, but it is not working. May be the hosting provider (bigrock) not allowing that. Alternatively, I am trying to write some code in online on PHP which will get the "sql" as parameter and returns the output as JSON format using json_encode. Is there any alternate methods which is better approach.

    Read the article

  • Why remote git server should have --bare

    - by dorelal
    I am reading these two articles. However I still do not get --bare option. If the server has no working directory and if a new member of the team clones the project then that person will not get any content. Any further clarification will help on why --bare is needed.

    Read the article

  • Linux pptp client stops working after several hours

    - by Aron Rotteveel
    Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

    Read the article

  • Routing not working correctly using the laravel framework

    - by samayres1992
    I'm using the book wrote by one of the guys that created laravel, so I'd like to think for the most part this code isn't horribly wrong. My server is setup with nginx serving all static files and apache2 serving php. My config for each are the following: apache2: <VirtualHost *> # Host that will serve this project. ServerName litl.it # The location of our projects public directory. DocumentRoot /var/www/litl.it/laravel/public # Useful logs for debug. CustomLog /var/log/apache.access.log common ErrorLog /var/log/apache.error.log # Rewrites for pretty URLs, better not to rely on .htaccess. <Directory /var/www/litl.it/laravel/public> <IfModule mod_rewrite.c> Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] </IfModule> </Directory> nginx: server { # Port that the web server will listen on. listen 80; # Host that will serve this project. server_name litl.it *.litl.it; # Useful logs for debug. access_log /var/log/nginx.access.log; error_log /var/log/nginx.error.log; rewrite_log on; # The location of our projects public directory. root /var/www/litl.it/laravel/public; # Point index to the Laravel front controller. index index.php; location / { # URLs to attempt, including pretty ones. try_files $uri $uri/ /index.php?$query_string; } # Remove trailing slash to please routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # PHP FPM configuration. location ~* \.php$ { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; try_files index index.php $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root/php/$fastcgi_script_name; } # We don't need .ht files with nginx. location ~ /\.ht { deny all; } location @proxy { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy_params; } error_page 403 /error/403.html; error_page 404 /error/404.html; error_page 405 /error/405.html; error_page 500 501 502 503 504 /error/5xx.html; location ^~ /error/ { internal; root /var/www/litl.it/lavarel/public/error; } } I'm including these server configs, as I feel this maybe the issue? Here is my incredibly basic routing file that should return "routing is working" on domain.com/test but instead it just returns the homepage. <?php Route::get('/', function() { return View::make('hello'); }); Route::get('/test', function() { return "routing is working"; }); Any ideas where I'm going wrong, I'm following this tutorial very closely and I'm confused why there is issue. Thanks!

    Read the article

  • Java RMI cannot connect to host from external client.

    - by Koe
    I've been using RMI in this project for a while. I've gotten the client program to connect (amongst other things) to the server when running it over my LAN, however when running it over the internet I'm running into the following exception: java.rmi.ConnectException: Connection refused to host: (private IP of host machine); nested exception is: java.net.ConnectException: Connection timed out: connect at sun.rmi.transport.tcp.TCPEndpoint.newSocket(Unknown Source) at sun.rmi.transport.tcp.TCPChannel.createConnection(Unknown Source) at sun.rmi.transport.tcp.TCPChannel.newConnection(Unknown Source) at sun.rmi.server.UnicastRef.invoke(Unknown Source) at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(Unknown Source) at java.rmi.server.RemoteObjectInvocationHandler.invoke(Unknown Source) at $Proxy1.ping(Unknown Source) at client.Launcher$PingLabel.runPing(Launcher.java:366) at client.Launcher$PingLabel.<init>(Launcher.java:353) at client.Launcher.setupContentPane(Launcher.java:112) at client.Launcher.<init>(Launcher.java:99) at client.Launcher.main(Launcher.java:59) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.<init>(Unknown Source) at java.net.Socket.<init>(Unknown Source) at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(Unknown Source) at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(Unknown Source) ... 12 more This error is remeniscent of my early implementation of RMI and I can obtain the error verbatum if I run the client locally without the server program running as well. To me Connection Timed Out means a problem with the server's response. Here's the client initiation: public static void main(String[] args) { try { String host = "<WAN IP>"; Registry registry = LocateRegistry.getRegistry(host, 1099); Login lstub = (Login) registry.lookup("Login Server"); Information istub = (Information) registry.lookup("Game Server"); new Launcher(istub, lstub); } catch (RemoteException e) { System.err.println("Client exception: " + e.toString()); e.printStackTrace(); } catch (NotBoundException e) { System.err.println("Client exception: " + e.toString()); e.printStackTrace(); } } Interestingly enough no Remote Exception is thrown here. Here's the server initiation: public static void main(String args[]) { try { GameServer gobj = new GameServer(); Information gstub = (Information) UnicastRemoteObject.exportObject( gobj, 1099); Registry registry = LocateRegistry.createRegistry(1099); registry.bind("Game Server", gstub); LoginServer lobj = new LoginServer(gobj); Login lstub = (Login) UnicastRemoteObject.exportObject(lobj, 7099); // Bind the remote object's stub in the registry registry.bind("Login Server", lstub); System.out.println("Server ready"); } catch (Exception e) { System.err.println("Server exception: " + e.toString()); e.printStackTrace(); } } Bad practice with the catch(Exception e) I know but bear with me. Up to this stage I know it works fine over the LAN, here's where the exception occurs over the WAN and is the first place a method in the server is called: private class PingLabel extends JLabel { private static final long serialVersionUID = 1L; public PingLabel() { super(""); runPing(); } public void setText(String text) { super.setText("Ping: " + text + "ms"); } public void runPing() { try { PingThread pt = new PingThread(); gameServer.ping(); pt.setRecieved(true); setText("" + pt.getTime()); } catch (RemoteException e) { e.printStackTrace(); } } } That's a label placed on the launcher as a ping test. the method ping(), in gameserver does nothing, as in is a null method. It's worth noting also that ports 1099 and 7099 are forwarded to the server machine (which should be obvious from the stack trace). Can anyone see anyting I'm missing/doing wrong? If you need any more information just ask. EDIT: I'm practically certain the problem has nothing to do with my router settings. When disabling my port forwarding settings I get a slightly different error: Client exception: java.rmi.ConnectException: Connection refused to host: (-WAN IP NOT LOCAL IP-); but it appears both on the machine locally connected to the server and on the remote machine. In addition, I got it to work seamlessly when connecting the server straight tho the modem (cutting out the router. I can only conclude the problem is in my router's settings but can't see where (I've checked and double checked the port forwarding page). That's the only answer i can come up with.

    Read the article

  • Xdebug: remote debugging won't stop at breakpoints

    - by Bryan M.
    I'm having a problem with xdebug not stopping at breakpoints when using remote debugging (everything is fine when running scripts via the command line). It will break at the first line of the program, then exit, not catching any breakpoints. It used to work fine, until I switched over to using MacPorts for Apache and PHP. I've tried re-compiling it serveral times (with several versions), but no dice. I'm using PHP 5.3.1 and Xdebug 2.1.0-beta3 I've also tried at least 3 different debugging programs (MacGDBp, Netbeans and JetBrains Web IDE). My php.ini settings look like: [xdebug] xdebug.remote_enable=1 xdebug.remote_handler=dbgp xdebug.remote_mode=req xdebug.remote_port=9000 xdebug.remote_host=localhost xdebug.idekey=webide And when I log the debugger output, setting a breakpoint looks like this/; <- breakpoint_set -i 895 -t line -f file:///Users/WM_imac/Sites/wm/debug_test.php -n 13 -s enabled -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="breakpoint_set" transaction_id="895" state="enabled" id="890660002"></response> When run, the debugger will get the context of the first line of the application, then send the detach and stop messages. However, this line is output when starting the debugger. <- feature_get -i 885 -n breakpoint_types -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get" transaction_id="885" feature_name="breakpoint_types" supported="1"><![CDATA[line conditional call return exception]]></response> Does 'line conditional call return exception' mean anything?

    Read the article

  • Code to connect to remote server using perl

    - by user304852
    I'm written small code to connect to remote server using perl but observing error messages #!/usr/bin/perl -w use Net::Telnet; $telnet = new Net::Telnet ( Timeout=>60, Errmode=>'die'); $telnet->open('192.168.50.40'); $telnet->waitfor('/login:/'); $telnet->print('queen'); $telnet->waitfor('/password:/'); $telnet->print('kinG!'); $telnet->waitfor('/:/'); $telnet->print('vol >> C:\result.txt'); $telnet->waitfor('/:/'); $telnet->cmd("mkdir vol"); $telnet->print('mkdir vol234'); $telnet->cmd("mkdir vol1"); $telnet->waitfor('/\$ $/i'); $telnet->print('whoamI'); print $output; But while running i'm getting following errors C:\>perl -c E:\test\net.pl E:\test\net.pl syntax OK C:\>perl E:\test\net.pl command timed-out at E:\test\net.pl line 13 C:\> Help me in this regard.. i'm not much aware of perl

    Read the article

  • Remoting server forcibly closing client connections in the middle of remote calls

    - by Carsten Hess
    Hello everyone. I have a system consisting of a server accepting remoting calls from clients with TCP as the underlying transportlayer. It normally works like a charm, but if I increase the no. of clients, the server starts at random to close the TCP connections in the middle of the calls. Not all calls are interrupted this way. That is really unexpected behaviour... I get no exceptions on the server side, just the client side exception: System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host Server stack trace: ved System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) ved System.Runtime.Remoting.Channels.SocketStream.Read(Byte[] buffer, Int32 offset, Int32 size) ved System.Runtime.Remoting.Channels.SocketHandler.ReadFromSocket(Byte[] buffer, Int32 offset, Int32 count) ved System.Runtime.Remoting.Channels.SocketHandler.Read(Byte[] buffer, Int32 offset, Int32 count) ved System.Runtime.Remoting.Channels.SocketHandler.ReadAndMatchFourBytes(Byte[] buffer) ved System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadAndMatchPreamble() ved System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation) ved System.Runtime.Remoting.Channels.Tcp.TcpClientSocketHandler.ReadHeaders() ved System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) ved System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: ved System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) ved System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) ved EBH.GuG.AgentKit.Transports.RemotingAgentHostEndPoint.SyncInvoke(Agent a, Int32 port)

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >