Search Results

Search found 4337 results on 174 pages for 'binary runner'.

Page 133/174 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • To Obtain EPOCH Time Value from a Packed BIT Structure in C [migrated]

    - by xde0037
    This is not a home assignment! We have a binary data file which has following data structure: (It is a 12 byte structure): I need to find out Epoch time value(total time value is packed in 42 bits as described below): Field-1 : Byte 1, Byte 2, + 6 Bits from Byte 3 Time-1 : 2 Bits from Byte 3 + Byte 4 Time-2 : Byte 5, Byte 6, Byte 7, Byte 8 Field-2 : Byte 9, Byte 10, Byte 11, Byte 12 For Field-1 and Field-2 I do not have issue as they can be taken out easily. I need time value in Epoch Time (long) as it has been packed in Bytes 5,6,7,8 and 3 and 4 as follows: (the bit structure for the time value is as follows): Bytes 5 to 8 (32 bit word) Packs time value bits from 0 thru 31 (byte 5 has 0 to 7 bits, byte 6 has 8 to 15, byte 7 has 16 to 23, byte 8 has 24 to 31). the remaining 10 bits of time value are packed in Bytes 3 and byte 4 as follows: byte 3 has 2 bits:32 and 33, and Byte 4 has remaining bits : 34 to 41. So total bits for time value is 42 bits, packed as above. I need to compute epoch value coming out of these 42 bits. How do I do it? I have done something like this but not sure it gives me correct value: typedef struct P_HEADER { unsigned int tmuNumber : 21; unsigned int time1 : 10; // Bits 6,7 from Byte-3 + 8 bits from Byte-4 unsigned int time2 : 32; // 32 bits: Bytes 5,6,7,8 unsigned int traceKey : 32; } __attribute__((__packed__)) P_HEADER; Then in the code : P_HEADER *header1; //get input string in hexa,etc..etc.. //parse the input with the header as : header1 = (P_HEADER *)inputBuf; // then print the header1->time1, header1->time2 .... long ttime = header1->time1|header1->time2; //?? is this the way to get values out? Any hint tip will be appreciated. Environment is : gcc 4.1, Linux Thanks in advance.

    Read the article

  • Zelda-style top-down RPG. How to store tile and collision data?

    - by Delerat
    I'm looking to build a Zelda: LTTP style top-down RPG. I've read a lot on the subject and am currently going back and forth on a few solutions. I'm using C#, MonoGame, and Tiled. For my tile maps, these are the choices I can see in front of me: Store each tile as its own array. Each one having 3-4 layers, texture/animation, depth, flags, and maybe collision(depending on how I do it). I've read warning about memory issues going this route, and my biggest map will probably be 160x120 tiles. My average map however will be about 40x30. The number of tiles might cut in half if I decide to double my tile size, which is currently 16x16. This is the most appealing approach for me, as I feel like I would know how to save maps, make changes, and separate it into chunks for collision checks. Store the static parts of my tile map in multiple arrays acting as the different layers. Then I would just use entities for anything that wasn't static. All of the other tile data such as collisions, depth, etc., would be stored in their own layers as well I guess? This way just seems messy to me though. Regardless of which one I choose, I'm also unsure how to plan all of that other tile data. I could write a bunch of code that would know which integer represents what tile and it's data, but if I changed a tileset in Tiled and exported it again, all of those integers could potentially change and I'd have to adjust a whole bunch of code. My other issue is about how I could do collision. I want to at least support angled collision that slides you around the corners of objects like LTTP does, if not more oddball shapes as well. So do I: Store collision as a flag for binary collision. Could I get this to support angles? Would it be fine to store collision as an integer and have each number represent a certain angle of collision? Store a list of rectangles or other shapes and do collision that way? Sorry for the large two-part(three-part?) question. I felt like these needed to be asked together as I believe each choice influences the other.

    Read the article

  • ?RAC??????(Rolling)??/????????

    - by JaneZhang(???)
       ?RAC??????????,???????,???????????(Rolling),????,???????,??????????,???????????,????????,???????????????,?????????????????,???????   ?????????????????Rolling???,???????????Rolling?,?????????? ????,???Rolling???????:1. ?????2. ?????,????????????3. ????????????????????4. ??????,????????????????5. ?????????Readme????????????:1). ?oracle???????????????????.2). ??????:3). ??1????ORACLE_HOME?????????+ASM??(???);4). ?1?????:$cd $ORACLE_HOME/OPatch/10082277$opatch apply5). ??opatch????????????,??????????:6). ??1????ORACLE_HOME?????????+ASM??(???);7). ??2????ORACLE_HOME?????????+ASM??(???);8). ?????????????,??????????;9). ??2????ORACLE_HOME?????????+ASM??(???);10).???????,????? ????10.2.0.4 RAC???(Rolling)????8575528???:1).?oracle???????????????????,??:$ORACLE_HOME/OPatch??.$ pwd/u01/app/oracle/OPatch$ lsdocs  emdpatch.pl  jlib  opatch  opatch.ini  opatch.pl  opatchprereqs  p8575528_10204_Linux-x86.zip2).??????:su - oracle$ unzip p8575528_10204_Linux-x86.zipArchive:  p8575528_10204_Linux-x86.zip  creating: 8575528/  creating: 8575528/files/  creating: 8575528/files/lib/  creating: 8575528/files/lib/libserver10.a/ inflating: 8575528/files/lib/libserver10.a/kks1.o inflating: 8575528/files/lib/libserver10.a/kksc.o inflating: 8575528/files/lib/libserver10.a/kksh.o inflating: 8575528/files/lib/libserver10.a/ksmp.o  creating: 8575528/etc/  creating: 8575528/etc/config/ inflating: 8575528/etc/config/inventory inflating: 8575528/etc/config/actions  creating: 8575528/etc/xml/ inflating: 8575528/etc/xml/GenericActions.xml inflating: 8575528/etc/xml/ShiphomeDirectoryStructure.xml inflating: 8575528/README.txt    $ ls8575528  docs  emdpatch.pl  jlib  opatch  opatch.ini  opatch.pl  opatchprereqs  p8575528_10204_Linux-x86.zip3).????????????RAC?????(rolling)?$ $ORACLE_HOME/OPatch/opatch query -all /u01/app/oracle/OPatch/8575528|grep rollingPatch is a rolling patch: true <=====??????4).??1??????ORACLE_HOME?????????(???ASM,????):$srvctl stop instance -d <dbname> -i <instance_name>$srvctl stop asm -n <nodename>??:$srvctl stop instance -d ONEPIECE -i ONEPIECE1$srvctl stop asm -n nascds14$ crs_stat -tName           Type           Target    State     Host      ------------------------------------------------------------ora....E1.inst application    OFFLINE   OFFLINE            ora....SM1.asm application    OFFLINE   OFFLINE5). ?1?????:??:$su - oracle$cd /u01/app/oracle/OPatch/8575528$opatch applyInvoking OPatch 10.2.0.4.2Oracle Interim Patch Installer version 10.2.0.4.2Copyright (c) 2007, Oracle Corporation.  All rights reserved.Oracle Home       : /u01/app/oracleCentral Inventory : /home/oracle/oraInventory  from           : /etc/oraInst.locOPatch version    : 10.2.0.4.2OUI version       : 10.2.0.4.0OUI location      : /u01/app/oracle/ouiLog file location : /u01/app/oracle/cfgtoollogs/opatch/opatch2012-06-13_01-27-38AM.logApplySession applying interim patch '8575528' to OH '/u01/app/oracle'Running prerequisite checks...OPatch detected the node list and the local node from the inventory.  OPatch will patch the local system thenpropagate the patch to the remote nodes.This node is part of an Oracle Real Application Cluster.Remote nodes: 'nascds15'Local node: 'nascds14'Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.(Oracle Home = '/u01/app/oracle')Is the local system ready for patching? [y|n]y <======??yUser Responded with: YBacking up files and inventory (not for auto-rollback) for the Oracle HomeBacking up files affected by the patch '8575528' for restore. This might take a while...Backing up files affected by the patch '8575528' for rollback. This might take a while...Patching component oracle.rdbms, 10.2.0.4.0...Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kks1.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kksc.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kksh.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/ksmp.o"Running make for target ioracleApplySession adding interim patch '8575528' to inventoryVerifying the update...Inventory check OK: Patch ID 8575528 is registered in Oracle Home inventory with proper meta-data.Files check OK: Files from Patch ID 8575528 are present in Oracle Home.The local system has been patched.  You can restart Oracle instances on it.Patching in rolling mode.The node 'nascds15' will be patched next.Please shutdown Oracle instances running out of this ORACLE_HOME on 'nascds15'.(Oracle Home = '/u01/app/oracle')Is the node ready for patching? [y|n]6). ??opatch????????????????????????7). ??1???ASM ????????:$srvctl start asm -n <nodename>$srvctl start instance -d <dbname> -i <instance_name>??:$srvctl start asm -n nascds14$srvctl start instance -d ONEPIECE -i ONEPIECE1$crs_stat -tora....E1.inst application    ONLINE    ONLINE    nascds14  ora....SM1.asm application    ONLINE    ONLINE    nascds148).??2???ASM????????:$srvctl stop instance -d <dbname> -i <instance_name>$srvctl stop asm -n <nodename>$srvctl stop instance -d ONEPIECE -i ONEPIECE2$srvctl stop asm -n nascds15$crs_statora....E2.inst application    OFFLINE   OFFLINE            ora....SM2.asm application    OFFLINE   OFFLINE9). ?????????????,???????????Is the node ready for patching? [y|n] y <====??yUser Responded with: YUpdating nodes 'nascds15'  Apply-related files are:    FP = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt"    DP = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_dirs.txt"    MP = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt"    RC = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remote_cmds.txt"Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt" withactual path.Propagating files to remote nodes...Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_dirs.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_dirs.txt" withactual path.Propagating directories to remote nodes...Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt" withactual path.Running command on remote node 'nascds15':cd /u01/app/oracle/rdbms/lib; /usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/u01/app/oracle || echoREMOTE_MAKE_FAILED::>&2The node 'nascds15' has been patched.  You can restart Oracle instances on it.There were relinks on remote nodes.  Remember to check the binary size and timestamp on the nodes 'nascds15' .The following make commands were invoked on remote nodes:'cd /u01/app/oracle/rdbms/lib; /usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/u01/app/oracle'OPatch succeeded.10). ??2???ASM????????:$srvctl start asm -n <nodename>$srvctl start instance -d <dbname> -i <instance_name>??:$srvctl start asm -n nascds15$srvctl start instance -d ONEPIECE -i ONEPIECE211).??????????????????????????$ORACLE_HOME/OPatch/opatch lsinventory[oracle@nascds14 8575528]$ $ORACLE_HOME/OPatch/opatch lsinventoryInvoking OPatch 10.2.0.4.2Oracle Interim Patch Installer version 10.2.0.4.2Copyright (c) 2007, Oracle Corporation.  All rights reserved.Oracle Home       : /u01/app/oracleCentral Inventory : /home/oracle/oraInventory  from           : /etc/oraInst.locOPatch version    : 10.2.0.4.2OUI version       : 10.2.0.4.0OUI location      : /u01/app/oracle/ouiLog file location : /u01/app/oracle/cfgtoollogs/opatch/opatch2012-06-13_01-44-11AM.logLsinventory Output file location : /u01/app/oracle/cfgtoollogs/opatch/lsinv/lsinventory2012-06-13_01-44-11AM.txt--------------------------------------------------------------------------------Installed Top-level Products (2):Oracle Database 10g                                                  10.2.0.1.0Oracle Database 10g Release 2 Patch Set 3                            10.2.0.4.0There are 2 products installed in this Oracle Home.Interim patches (1) :Patch  8575528      : applied on Wed Jun 13 01:28:24 CST 2012<<<<<<<<<<<<<<<<<<<  Created on 17 Aug 2010, 07:56:36 hrs PST8PDT  Bugs fixed:    8575528Rac system comprising of multiple nodes Local node = nascds14 Remote node = nascds15--------------------------------------------------------------------------------OPatch succeeded.Rac system comprising of multiple nodes Local node = nascds14 Remote node = nascds15--------------------------------------------------------------------------------OPatch succeeded. ????10.2.0.4 RAC???(Rolling)????8575528???: 1).??1?????ORACLE_HOME?????????(???ASM,????):$srvctl stop instance -d <dbname> -i <instance_name>$srvctl stop asm -n <nodename>??:$srvctl stop instance -d ONEPIECE -i ONEPIECE1$srvctl stop asm -n nascds14$crs_stat -tName           Type           Target    State     Host        ------------------------------------------------------------ora....E1.inst application    OFFLINE   OFFLINE              ora....SM1.asm application    OFFLINE   OFFLINE  2). ?1??????:??:$su - oracle$cd $ORACLE_HOME/OPatch/8575528$opatch rollback -id 8575528Invoking OPatch 10.2.0.4.2Oracle Interim Patch Installer version 10.2.0.4.2Copyright (c) 2007, Oracle Corporation.  All rights reserved.Oracle Home       : /u01/app/oracleCentral Inventory : /home/oracle/oraInventory  from           : /etc/oraInst.locOPatch version    : 10.2.0.4.2OUI version       : 10.2.0.4.0OUI location      : /u01/app/oracle/ouiLog file location : /u01/app/oracle/cfgtoollogs/opatch/opatch2012-06-13_18-22-10PM.logRollbackSession rolling back interim patch '8575528' from OH '/u01/app/oracle'Running prerequisite checks...OPatch detected the node list and the local node from the inventory.  OPatch will patch the local system thenpropagate the patch to the remote nodes.This node is part of an Oracle Real Application Cluster.Remote nodes: 'nascds15'Local node: 'nascds14'Please shut down Oracle instances running out of this ORACLE_HOME on all the nodes.(Oracle Home = '/u01/app/oracle')Are all the nodes ready for patching? [y|n]y <=========??yUser Responded with: YBacking up files affected by the patch '8575528' for restore. This might take a while...Patching component oracle.rdbms, 10.2.0.4.0...Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kks1.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kksc.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/kksh.o"Updating archive file "/u01/app/oracle/lib/libserver10.a"  with "lib/libserver10.a/ksmp.o"Running make for target ioracleRollbackSession removing interim patch '8575528' from inventoryPatching in rolling mode.The node 'nascds15' will be patched next.Please shutdown Oracle instances running out of this ORACLE_HOME on 'nascds15'.(Oracle Home = '/u01/app/oracle')Is the node ready for patching? [y|n]3). ??opatch????????????????????????????4). ??1??ASM ????????:$srvctl start asm -n <nodename>$srvctl start instance -d <dbname> -i <instance_name>??:$srvctl start asm -n nascds14$srvctl start instance -d ONEPIECE -i ONEPIECE1$crs_stat -tora....E1.inst application    ONLINE    ONLINE    nascds14    ora....SM1.asm application    ONLINE    ONLINE    nascds145).??2???ASM????????:$srvctl stop instance -d <dbname> -i <instance_name>$srvctl stop asm -n <nodename>$srvctl stop instance -d ONEPIECE -i ONEPIECE2$srvctl stop asm -n nascds15$crs_stat -tora....E2.inst application    OFFLINE   OFFLINE              ora....SM2.asm application    OFFLINE   OFFLINE  6). ??????????????,??????????The node 'nascds15' will be patched next.Please shutdown Oracle instances running out of this ORACLE_HOME on 'nascds15'.(Oracle Home = '/u01/app/oracle')Is the node ready for patching? [y|n]y <=========??yUser Responded with: YUpdating nodes 'nascds15'  Rollback-related files are:    FR = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remove_files.txt"    DR = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remove_dirs.txt"    FP = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt"    MP = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt"    RC = "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remote_cmds.txt"Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remove_dirs.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/remove_dirs.txt" withactual path.Removing directories on remote nodes...Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_files.txt" withactual path.Propagating files to remote nodes...Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_dirs.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/copy_dirs.txt" withactual path.Propagating directories to remote nodes...Instantiating the file "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt.instantiated"by replacing $ORACLE_HOME in "/u01/app/oracle/.patch_storage/8575528_Aug_17_2010_07_56_36/rac/make_cmds.txt" withactual path.Running command on remote node 'nascds15':cd /u01/app/oracle/rdbms/lib; /usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/u01/app/oracle || echoREMOTE_MAKE_FAILED::>&2The node 'nascds15' has been patched.  You can restart Oracle instances on it.There were relinks on remote nodes.  Remember to check the binary size and timestamp on the nodes 'nascds15' .The following make commands were invoked on remote nodes:'cd /u01/app/oracle/rdbms/lib; /usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/u01/app/oracle'OPatch succeeded.7). ??2???ASM????????:$srvctl start asm -n <nodename>$srvctl start instance -d <dbname> -i <instance_name>??:$srvctl start asm -n nascds15$srvctl start instance -d ONEPIECE -i ONEPIECE28).??????????????????????????$ $ORACLE_HOME/OPatch/opatch lsinventoryInvoking OPatch 10.2.0.4.2Oracle Interim Patch Installer version 10.2.0.4.2Copyright (c) 2007, Oracle Corporation.  All rights reserved.Oracle Home       : /u01/app/oracleCentral Inventory : /home/oracle/oraInventory  from           : /etc/oraInst.locOPatch version    : 10.2.0.4.2OUI version       : 10.2.0.4.0OUI location      : /u01/app/oracle/ouiLog file location : /u01/app/oracle/cfgtoollogs/opatch/opatch2012-06-13_19-40-41PM.logLsinventory Output file location : /u01/app/oracle/cfgtoollogs/opatch/lsinv/lsinventory2012-06-13_19-40-41PM.txt--------------------------------------------------------------------------------Installed Top-level Products (2):Oracle Database 10g                                                  10.2.0.1.0Oracle Database 10g Release 2 Patch Set 3                            10.2.0.4.0There are 2 products installed in this Oracle Home.There are no Interim patches installed in this Oracle Home.Rac system comprising of multiple nodes Local node = nascds14 Remote node = nascds15--------------------------------------------------------------------------------OPatch succeeded.

    Read the article

  • vsftpd 500 OOPS: priv_sock_get_int

    - by user1613878
    I have a problem with vsftpd that replies "500 OOPS: priv_sock_get_int" when i do command "ls". following is a snip of ftp client console running on osx. And I'm using test account that has home directory on the ftp server, not virtual account. Connected to 192.0.0.20. 220 satellite Name (192.0.0.20:john): test_account 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 500 OOPS: priv_sock_get_int 421 Service not available, remote server has closed connection. and my vsftpd.conf local_enable=YES write_enable=YES #local_umask=022 local_umask=002 #anon_upload_enable=YES #anon_mkdir_write_enable=YES #dirmessage_enable=YES #xferlog_enable=YES connect_from_port_20=YES #chown_uploads=YES #chown_username=whoever #xferlog_file=/var/log/vsftpd.log #xferlog_std_format=YES #idle_session_timeout=600 #data_connection_timeout=120 #nopriv_user=test #async_abor_enable=YES #ascii_upload_enable=YES #ascii_download_enable=YES ftpd_banner=welcome #deny_email_enable=YES #banned_email_file=/etc/vsftpd.banned_emails #chroot_local_user=YES #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list #ls_recurse_enable=YES listen=YES #listen_ipv6=YES #ssl_enable=NO pasv_enable=YES pasv_max_port=12500 pasv_min_port=12000 port_enable=YES pasv_address=192.0.0.20 pasv_promiscuous=YES port_promiscuous=YES file_open_mode=0666

    Read the article

  • Can't get Postfix Admin to use Dovecot password hashing

    - by Paul
    I'm setting up Postfix Admin 2.91 and trying to use dovecot:SHA512-CRYPT for password hashing. In config.inc.php I have set: // dovecot:CRYPT-METHOD = use dovecotpw -s 'CRYPT-METHOD'. Example: dovecot:CRAM-MD5 // (WARNING: don't use dovecot:* methods that include the username in the hash - you won't be able to login to PostfixAdmin in this case) $CONF['encrypt'] = 'dovecot:SHA512-CRYPT'; // If you use the dovecot encryption method: where is the dovecotpw binary located? // for dovecot 1.x // $CONF['dovecotpw'] = "/usr/sbin/dovecotpw"; // for dovecot 2.x (dovecot 2.0.0 - 2.0.7 is not supported!) $CONF['dovecotpw'] = "/usr/sbin/doveadm pw"; I have also tried SHA256-CRYPT and MD5-CRYPT with same results (as I understand it, these do not include usernames in the hash) In running setup.php, I get the following message when trying to create an admin account: can't encrypt password with dovecotpw, see error log for details Server error log reports: 1624#0: *6 FastCGI sent in stderr: "PHP message: dovecotpw password encryption failed. PHP message: STDERR output: sh: 1: /usr/sbin/doveadm: not found" while reading response header from upstream <...> upstream: "fastcgi://unix:/var/run/php5-fpm.sock:" <...> A couple quick checks: # ll /usr/sbin/doveadm -rwxr-xr-x 1 root root 423264 Feb 13 23:23 /usr/bin/doveadm* # doveadm pw -l CRYPT MD5 MD5-CRYPT SHA SHA1 SHA256 SHA512 SMD5 SSHA SSHA256 SSHA512 PLAIN CLEAR CLEARTEXT PLAIN-TRUNC CRAM-MD5 SCRAM-SHA-1 HMAC-MD5 DIGEST-MD5 PLAIN-MD4 PLAIN-MD5 LDAP-MD5 LANMAN NTLM OTP SKEY RPA SHA256-CRYPT SHA512-CRYPT # doveadmin pw -s SHA512-CRYPT Enter new password: Retype new password: {SHA512-CRYPT}$6$<long string here>/ Using Dovecot 2.2, PHP 5.5, MariaDB 10, Postfix 2.11, nginx 1.6.0, Ubuntu 12.04.

    Read the article

  • OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

    - by ewwhite
    Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

    Read the article

  • Telnet does not give a response

    - by floorish
    Some wireless access points are acting a little weird, so I want to reboot them every couple of hours. Luckily there exists a security flaw which lets me login as root through telnet when using port 1111 (without username and password). Now I want to use that to let my QNAP NAS execute the reboot command through telnet every now and then. The problem is however that that telnet version doesn't give any response if I connect to the AP. The telnet I use on OSX works just fine but the one on the NAS not. BusyBox v1.01 (2012.06.14-18:35+0000) multi-call binary Usage: telnet [-a] [-l USER] HOST [PORT] When I execute telnet <HOST> 1111 nothing happens. I can send the escape character ^] which gives me the following options: Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet The only way to get some commands executed is by suspending telnet with z followed by some random command which isn't recognized. Then the prompt shows this: # telnet 192.168.1.5 1111 ^] Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet z continuing... asdf Illegal command. 00> After that I am able to communicate with the AP, but when I exit the telnet session and try the same again, the AP refuses to connect at all and it must be manually rebooted (looks like the telnet session isn't shut down properly on the AP). So the question is what commands should I execute in order to communicate with the AP using the Busybox telnet version of the QNAP? (No, can't use ssh unfortunately)

    Read the article

  • Couldn't upload files to Sharepoint site while passing through Squid Proxy

    - by Ecio
    Hi all, we have this issue: one of our employees is collaborating with a supplier and he needs to upload documents on a Sharepoint site hosted on the supplier's main site. In our environment we use Squid Proxy to allow people navigate on the net (we have NTLM authentication and users transparently authenticate while using IE and FF). It seems that this specific Sharepoint site is using Integrated Windows Authentication only, and according to some research on the net it seems that this can have troubles with proxies. More specifically, we have tried two Squid versions: with Squid 3.0 we are unable to login to the site (the browser loads an empty page) with Squid 2.7 (that supports "Connection Pinning") we are able to login into the site, move on the different sections BUT.. when we try to upload a file that is bigger than a couple of KiloBytes (i.e. 10KB) the browser loads an error page (i think it's a 401 unauthorized but i must verify it) we've tried changing a couple of Squid options (in 2.7), what we got is that when you try to upload the file you got an authentication box (just like the initial login) and it refuses to go on even if you enter the same authentication credentials. What's really strange is that when you try to upload a small file (i.e. a text or binary 1KB file) the upload succeeds. I initially thought that maybe there was something misconfigured on their Sharepoint site but I've tried also this site: www.xsolive.com (it's a sharepoint 2007 demo site) and I've experienced the same problem. Has any of you experienced such behaviour? Thanks! Of course we've suggested to the supplier to activate also Basic+SSL and we're waiting for their reply..

    Read the article

  • Amazon Ec2: Problem In Setting up FTP Server

    - by Muntasir
    after setting up My vsFtp Server ON Ec2 i am facing problem , my client is Filezilla and i am getting this error Response: 230 Login successful. Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 500 OOPS: invalid pasv_address Command: PORT 10,130,8,44,240,50 Response: 500 OOPS: priv_sock_get_cmd Error: Failed to retrieve directory listing Error: Connection closed by server this is the current setting in my vsftpd.conf #nopriv_user=ftpsecure #async_abor_enable=YES # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list GNU nano 2.0.6 File: /etc/vsftpd/vsftpd.conf # #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES pasv_enable=YES pasv_min_port=2345 pasv_max_port=2355 listen_port=1024 pasv_address=ec2-xxxxxxx.compute-1.amazonaws.com pasv_promiscuous=YES Note: i have already open those port in security group i mean listen port, min max if someone shows me how to fix this i will be very greatful thanks

    Read the article

  • FTP timing out after login

    - by Imran
    For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories. Heres a log from FileZila... Status: Resolving address of testdomain.com Status: Connecting to 64.237.58.43:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 19:39. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER testaccount Response: 331 User testaccount OK. Password required Command: PASS ******** Response: 230-User testaccount has group access to: testaccount Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (64,237,58,43,145,153) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 18 matches total Error: Connection timed out Error: Failed to retrieve directory listing I have restarted the FTP service serveral times but still It doesnt loads. I only have this problem when my server is reaching it peak usage which is still only 1.0 (4 cores), 40% of 4GB ram. The ftp connections isnt maxed out because only me and my colleague have access to FTP on the server.

    Read the article

  • How to run multiple instances of Tor?

    - by Ed
    I'm trying to set up a special proxy server (running Windows). It will have several instances of Privoxy and Tor running and my app will choose which Privoxy instance to send HTTP requests to depending on the load. Privoxy will then forward them to Tor. I'm using srvany.exe to create the services. At the moment I'm running 3 Privoxy and 3 Tor services (I copied the binaries to different folders). Each Privoxy service is listening to its own port (8118, 8119, 8120). I can see them listening in a port scanner. This is the application path (for srvany in registry) for the 1st service: C:\Anonymiser\Privoxy 01\privoxy.exe --service I've also configured the Tor services to listen to different ports (9050, 9052, 9054). This is the application path for the 1st service: C:\Anonymiser\Tor 01\tor.exe -f "C:\Anonymiser\Tor 01\torrc" The problem is, when I start the Tor services, only the first service I start is listening to its port. The others aren't listening. They listen if I run them separately. Any ideas what could be wrong? How can I make all 3 services listen on their assigned ports? This is one of my Privoxy configs: confdir . logdir . logfile privoxy.log debug 1 # show each GET/POST/CONNECT request debug 4096 # Startup banner and warnings debug 8192 # Errors - we highly recommended enabling this listen-address localhost:8118 toggle 0 enable-remote-toggle 0 enable-remote-http-toggle 0 enable-edit-actions 1 buffer-limit 4096 forwarded-connect-retries 0 forward-socks4a / localhost:9050 . This is one of my Tor configs: ControlPort 9051 Log notice stdout SocksListenAddress localhost SocksPort 9050 EDIT: Found a workaround. The Tor binary wants a lock on a file in the AppData folder. Because all of them want a lock on the same file, only the first one I start will be working. The workaround is to run each Tor instance under a different account. Not the best solution, but it works.

    Read the article

  • Unexplained CPU and Disk activity spikes in SQL Server 2005

    - by Philip Goh
    Before I pose my question, please allow me to describe the situation. I have a database server, with a number of tables. Two of the biggest tables contain over 800k rows each. The majority of rows are less than 10k in size, though roughly 1 in 100 rows will be 1 MB but <4 MB. So out of the 1.6 million rows, about 16000 of them will be these large rows. The reason they are this big is because we're storing zip files binary blobs in the database, but I'm digressing. We have a service that runs constantly in the background, trimming 10 rows from each of these 2 tables. In the performance monitor graph above, these are the little bumps (red for CPU, green for disk queue). Once ever minute we get a large spike of CPU activity together with a jump in disk activity, indicated by the red arrow in the screenshot. I've run the SQL Server profiler, and there is nothing that jumps out as a candidate that would explain this spike. My suspicion is that this spike occurs when one of the large rows gets deleted. I've fed the results of the profiler into the tuning wizard, and I get no optimisation recommendations (i.e. I assume this means my database is indexed correctly for my current workload). I'm not overly worried as the server is coping fine in all circumstances, even under peak load. However, I would like to know if there is anything else I can do to find out what is causing this spike? Update: After investigating this some more, the CPU and disk usage spike was down to SQL server's automatic checkpoint. The database uses the simple recovery model, and this truncates the log file at each checkpoint. We can see this demonstrated in the following graph. As described on MSDN, the checkpoints will occur when the transaction log becomes 70% full and we are using the simple recovery model. This has been enlightening and I've definitely learned something!

    Read the article

  • Memcached session manager in Azure: Connection gets forcibly closed

    - by Edgar Pérez
    I am using Memcached Session Manager to handle Tomcat sessions in non-sticky mode. My deployment in Azure consists of a Worker Role with two instances which connect to an Azure VM running my Memcached server. Everything works pretty well, my session is persisted and retrieved by any of the two instances transparently. The problem arises when the session is idle for about 4 minutes; everything points out that the Azure Loadbalancer is closing the spymemcached connection to the VM after some period of inactivity. My MSM configuration is this: <Manager className="de.javakaffee.web.msm.MemcachedBackupSessionManager" memcachedNodes="n1:my-azure-vm.cloudapp.net:11211" sticky="false" sessionBackupAsync="false" sessionBackupTimeout="10000" lockingMode="uriPattern:/path1|/path2" requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js|ttf|eot|svg|woff)$" transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory" customConverter="de.javakaffee.web.msm.serializer.kryo.HibernateCollectionsSerializerFactory"/> The stacktrace printed by the spymemcached client is this: INFO net.spy.memcached.MemcachedConnection: Reconnecting due to exception on {QA sa=/10.194.132.206:13000, #Rops=1, #Wops=0, #iq=0, topRop=net.spy.memcached.protocol.binary.StoreOperationImpl@1d95da8, topWop=null, toWrite=0, interested=1} java.io.IOException: An existing connection was forcibly closed by the remote host at sun.nio.ch.SocketDispatcher.read0(Native Method) at sun.nio.ch.SocketDispatcher.read(Unknown Source) at sun.nio.ch.IOUtil.readIntoNativeBuffer(Unknown Source) at sun.nio.ch.IOUtil.read(Unknown Source) at sun.nio.ch.SocketChannelImpl.read(Unknown Source) at net.spy.memcached.MemcachedConnection.handleReads (MemcachedConnection.java:303) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:264) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:184) at net.spy.memcached.MemcachedClient.run(MemcachedClient.java:1298) Given this idle time limitation in Azure, is there any other way to make MSM work in the azure cloud?

    Read the article

  • Cannot install jdk 1.5 on Ubuntu 12.04

    - by u123
    I have installed Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-23-generic x86_64). Some info about the machine: $ grep --color "model name" /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz I need to install jdk5 to support an old application. I have tried: ~$ sudo apt-get install openjdk-5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package openjdk-5-jdk I have also tried: ~$ sudo apt-get install sun-java5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package sun-java5-jdk So its not available in the repos. I have tried to follow this guide (adding the jaunty repos): http://leonardo-pinho.blogspot.dk/2010/11/java-15-no-ubuntu-1010.html but same result. Then I have tried to download jdk-1_5_0_22-linux-i586.bin from here: http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html#jdk-1.5.0_22-oth-JPR and do: ~$ chmod a+x jdk-1_5_0_22-linux-i586.bin ~$ sudo ./jdk-1_5_0_22-linux-i586.bin Sun Microsystems, Inc. Binary Code License Agreement yes Unpacking... Checksumming... 0 0 Extracting... ./jdk-1_5_0_22-linux-i586.bin: 424: ./jdk-1_5_0_22-linux-i586.bin: ./install.sfx.19556: not found ./jdk-1_5_0_22-linux-i586.bin: 1: cd: can't cd to jdk1.5.0_22 Any suggestions?

    Read the article

  • How to update-grub on a system running overlayroot?

    - by mikepurvis
    We ship boxes configured with overlayroot, using the following overlayroot.conf: overlayroot=device:dev=/dev/sda6,timeout=20,recurse=0 Which produces the following mount configuration: $ mount overlayroot on / type overlayfs (rw,errors=remount-ro) /dev/sda5 on /media/root-ro type ext3 (ro,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda6 on /media/root-rw type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda1 on /boot type ext3 (rw) As you can see, three key physical partitions: sda1 is /boot, sda5 is a read-only "factory" root, and sda6 is a "user" root which can be wiped at any point to restore the machine to its original factory state. Now, the problem arises when update-grub is run for any reason: $ sudo update-grub [sudo] password for administrator: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Understandable, since / is an overlayfs. The contents of /usr/sbin/update-grub are: #!/bin/sh set -e exec grub-mkconfig -o /boot/grub/grub.cfg "$@" With /usr/sbin/grub-mkconfig being the business part of things. But the actual problem is in /usr/sbin/grub-probe, called by grub-mkconfig, and grub-probe is a binary. So my question is, is there a parameter or whatever which can make grub-probe do the right thing in the face of / being an overlayfs? And secondly, is there a way to hack/patch that in so that the update-grub script just does the right thing? Thanks.

    Read the article

  • How to permanently "renice" a process on Mac OS X (or iOS, etc)?

    - by mralexgray
    I use a nice (free) process manager called ATMonitor for Mac OS X that has a lot of cool hidden features... one of which is being able to click on a running process.. and set the "renice" from +20 (less priority) to -20 (highest priority). The best part.... it sticks between restarts... SO you want XYZ to get full attention all the time.. you set it once and it's done... I want to do the same thing (renice a process) on an iPad running a particular daemon.. and I don't know how to set a renice permanently. I can do it once, and it works fine... But the setting is lost on a reboot. I read somewhere.. Now, as for permanently resetting the priority of a process, this can't be done directly. You can fake it, however, with a shell script that starts the app and then immediately renice's it. Give that script a ".command" extension and it will be double-clickable in the GUI. Not very elegant, but it gets the job done. But as it says.. not very elegant, and I dont think this is how ATMonitor does it.... I found this thread.... http://superuser.com and they gave a way to do it as a launch argument, but no apparent way to save it as a persistent value... for instance - if the program wasn't going to be started by launchd... How do I set a permanent renice level, per executable binary, independent of it's PID, when, how or why it was launched?

    Read the article

  • Windows Server 2008R2 - can't change or remove the default gateway

    - by disserman
    We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

    Read the article

  • Is there a setting in Exchange Server 2007 that we can set to make these headers propogate and be received by a POP/IMAP client?

    - by Ruruboy
    When using EWS Managed API to send Email via Exchange Server 2007. I noticed that MAPI clients like MS Outlook display all custom headers. But when I use POP3/IMAP clients like MS Outlook Express. I have noticed that these custom headers do not display in the message opened from MS Outlook Express. Is there a setting in Exchange Server 2007 that we can set to make these custom headers propagate and be received by a POP/IMAP client? Also why do custom headers in example below display up in lower case in MAPI clients like MS Outlook? But surprisingly if we use SMTPClient class to send email then these headers display as sent with Case Sensitive letters. eg. Header. Example of Headers received by a MAPI client like MS Outlook via Exchange Server 2007 Received: from EXMAILVS1.blabla.com ([192.168.191.136]) by cashtp02.blabla.com ([XXX.XXX.XX.XXX]) with mapi; Mon, 20 Dec 2010 12:17:05 -0800 Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary From: asfsdf <[email protected]> To: asdsdf <[email protected]> Date: Mon, 20 Dec 2010 12:17:04 -0800 Subject: Please send me this header Thread-Topic: Please send me this header Thread-Index: AQHLoILek7g5cFgHQU6lHHfiKkdUMg== Message-ID: <[email protected]> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-Exchange-Organization-SCL: -1 X-MS-TNEF-Correlator: <[email protected]> customheader1: hello ali customheader2: hello Jace MIME-Version: 1.0

    Read the article

  • Validating signature trust with gpg?

    - by larsks
    We would like to use gpg signatures to verify some aspects of our system configuration management tools. Additionally, we would like to use a "trust" model where individual sysadmin keys are signed with a master signing key, and then our systems trust that master key (and use the "web of trust" to validate signatures by our sysadmins). This gives us a lot of flexibility, such as the ability to easily revoke the trust on a key when someone leaves, but we've run into a problem. While the gpg command will tell you if a key is untrusted, it doesn't appear to return an exit code indicating this fact. For example: # gpg -v < foo.asc Version: GnuPG v1.4.11 (GNU/Linux) gpg: armor header: gpg: original file name='' this is a test gpg: Signature made Fri 22 Jul 2011 11:34:02 AM EDT using RSA key ID ABCD00B0 gpg: using PGP trust model gpg: Good signature from "Testing Key <[email protected]>" gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: ABCD 1234 0527 9D0C 3C4A CAFE BABE DEAD BEEF 00B0 gpg: binary signature, digest algorithm SHA1 The part we care about is this: gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. The exit code returned by gpg in this case is 0, despite the trust failure: # echo $? 0 How do we get gpg to fail in the event that something is signed with an untrusted signature? I've seen some suggestions that the gpgv command will return a proper exit code, but unfortunately gpgv doesn't know how to fetch keys from keyservers. I guess we can parse the status output (using --status-fd) from gpg, but is there a better way?

    Read the article

  • MySQL socket connections working, but not port connections

    - by Neil
    I installed MySQL community 5.1.45 on my Snow Leopard 10.6, using the pkg from their site. I had previously installed a MySQL binary from entropy.ch. In the previous installation, the connections were working fine before I upgrade to Snow Leopard. In Snow Leopard, both the installations are problematic. Using an app called Sequel Pro, if I connect with the socket operation, it connects properly. However, a standard connection with the same credentials doesn't work. From what I've understood, socket connections happen on the machine itself between processes, whereas normal connections occur over the network/ports, in this case a loopback to my machine, since the server and client are both on the same machine. My new CakePHP installation isn't being able to connect to the db with the root credentials I provided. Btw, I've been starting the MySQL server using the Preference Pane. When I tried running mysqld from terminal, it gave me: 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test mysqld: Can't change dir to '/usr/local/mysql-5.1.45-osx10.6-x86_64/data/' (Errcode: 13) 100323 1:54:37 [ERROR] Aborting 100323 1:54:37 [Note] mysqld: Shutdown complete mbp is the name of my machine. How do I fix this so that my webserver can connect to the mysql server?

    Read the article

  • How does Subnetting Work?

    - by Kyle Brandt
    How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

    Read the article

  • ERROR with rpm_check_debug vs depsolve

    - by Frank Thornton
    Transaction Summary ========================================================================================================================================================== Install 9 Package(s) Upgrade 227 Package(s) Remove 1 Package(s) Total size: 252 M Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libasound.so.2()(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 libasound.so.2(ALSA_0.9)(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 ** Found 15 pre-existing rpmdb problem(s), 'yum check' output follows: alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of alsa-lib = ('0', '1.0.22', '3.el6') alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc8)(64bit) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2()(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2()(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2013-12-23-22-364infzT.yumtx root@www1 [~]# I did some research and this is due to a 32bit binary trying to install itself or broken repo? root@www1 [~]# yum repolist Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * extras: mirror.ash.fastserv.com * updates: ftp.usf.edu repo id repo name status base CentOS-6 - Base 6,284+83 dag Dag RPM Repository for Red Hat Enterprise Linux 4,559+91 extras CentOS-6 - Extras 14 updates CentOS-6 - Updates 247+39 repolist: 11,104 Now I disabled epel and rpmforge repops and still ended up with the same issues. Ideas?

    Read the article

  • Linux can't find file that exists

    - by Joe
    I'm trying to get Google's Dart language up and running, but it errors when running dart2js. I'm running Arch linux and I installed dart-sdk from AUR. Some relevant terminal output lies below. % dart2js main.dart /usr/local/bin/dart2js: line 7: /usr/local/bin/dart: No such file or directory % cat /usr/local/bin/dart2js #!/bin/sh # Copyright (c) 2012, the Dart project authors. Please see the AUTHORS file # for details. All rights reserved. Use of this source code is governed by a # BSD-style license that can be found in the LICENSE file. BIN_DIR=`dirname $0` exec $BIN_DIR/dart --allow_string_plus=false $BIN_DIR/../lib/dart2js/lib/compiler/implementation/dart2js.dart "$@" % file /usr/local/bin/dart /usr/local/bin/dart: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x27fe166ca015c1adfeaf3a6f9c018e7d7af46d9f, stripped % ls -alh /usr/local/bin total 4.9M drwxr-xr-x 2 root root 4.0K Jun 10 22:51 . drwxr-xr-x 12 root root 4.0K Jun 10 22:51 .. -rwxr-xr-x 1 root root 422K May 10 22:41 cargo -rwxr-xr-x 1 root root 2.7M Jun 10 22:50 dart -rwxr-xr-x 1 root root 360 Jun 6 16:20 dart2js -rwxr-xr-x 1 root root 176 Jun 6 16:20 pub -rwxr-xr-x 1 root root 166K May 10 22:41 rustc -rwxr-xr-x 1 root root 1.6M May 10 22:41 rustdoc % uname -rm 3.3.7-1-ARCH x86_64 Could it be because I'm running a 64bit OS and the dart binary is 32bit?

    Read the article

  • Lightweight Linux distro that includes developer tools? (or, the most BSD-like Linux)

    - by RevAaron
    I cut my teeth on Minix and Slackware 1.1, but I've been in the OS X Wilderness for the last few years. I'm trying to standardize on a Linux distribution for personal and work-related use on less powerful laptops and under virtualization. So far, NetBSD and OpenBSD are the best fit for my purposes- but after plenty of frustration I've come to the conclusion that I need to stick with Linux to get the hardware and software support that comes with it. What I like about NetBSD/OpenBSD that I'd like to keep: X, but no default KDE, GNOME or XFCE! A sensible /etc and dot file setup- startx calls xinit, xinit looks for ~/.xinitrc; nothing more complicated than that is needed. Command line tools and file-based configuration: I shouldn't need a GUI to connect to a WAP. Decent selection of binary packages; building from source is OK, but nothing source-only like Gentoo. pkg_add (BSD) and apt-get both have treated me well in the past. Modest RAM and HDD requirements: boot + X + awesome+ two xterms takes up 80 MB on OpenBSD and 240 MB on Debian 5 and Crunchbang In my experience, most "lightweight" and Live CDs focus on a nice desktop environment crammed into a CD or USB stick; once you add build-essentials you end up with something just about as bloated as Ubuntu or Debian full install. Crunchbang is a great example. Thanks in advance for all suggestions!

    Read the article

  • How do I install the pdo_mysql driver on Red Hat Enterprise Linux 6.1?

    - by Will Martin
    I have a RHEL box running PHP 5.3.3, which was installed using the binary packages provided by yum. I have installed the php-pdo package: # yum info php-pdo Loaded plugins: product-id, rhnplugin, subscription-manager Updating Red Hat repositories. Installed Packages Name : php-pdo Arch : x86_64 Version : 5.3.3 Release : 3.el6_1.3 Size : 168 k Repo : installed From repo : rhel-x86_64-server-6 Summary : A database access abstraction module for PHP applications URL : http://www.php.net/ License : PHP Description : The php-pdo package contains a dynamic shared object that will add : a database access abstraction layer to PHP. This module provides : a common interface for accessing MySQL, PostgreSQL or other : databases. It appears to be working correctly for SQLite databases, but not MySQL. There's no file including pdo_mysql.so in /etc/php.d, and there is no copy of pdo_mysql.so in /usr/lib64/php/modules. I'm pretty sure I just need the driver file and a line in the PHP configuration. A yum search pdo mysql didn't turn up any useful packages, and Google has failed me. If I were on Ubuntu or Debian, I'd apt-get install php5-mysql and be done with it. So ... where in Red Hat land do I get a copy of pdo_mysql.so, and install it properly?

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >