Search Results

Search found 8779 results on 352 pages for 'embedded resource'.

Page 135/352 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• #altnetseattle &ndash; REST Services

  - by GeekAgilistMercenary

  Below are the notes I made in the REST Architecture Session I helped kick off with Andrew. RSS, ATOM, and such needed for better discovery.  i.e. there still is a need for some type of discovery. Difficult is modeling behaviors in a RESTful way.  ??  Invoking some type of state against an object.  For instance in the case of a POST vs. a GET.  The GET is easy, comes back as is, but what about a POST, which often changes some state or something. Challenge is doing multiple workflows with stateful workflows.  How does batch work.  Maybe model the batch as a resource. Frameworks aren’t particularly part of REST, REST is REST.  But point argued that REST is modeled, or part of modeling a state machine of some sort… ? Nothing is 100% reliable w/ REST – comparisons drawn with TCP/IP.  Sufficient probability is made however for the communications, but the idea of a possible failure has to be built into the usage model of REST. Ruby on Rails / RESTfully, and others used.  What were their issues, what do they do.  ATOM feeds, object serialized, using LINQ to XML w/ this.  No state machine libraries. Idempotent areas around REST and single change POST changes are inherent in the architecture. REST – one of the constrained languages is for the interaction w/ the system.  Limiting what can be done on the resources.  - disagreement, there is no agreed upon REST verbs. Sam Ruby – RESTful services.  Expanded the verbs within REST/HTTP pushes you off the web.  Of the existing verbs POST leaves the most up for debate. Robert Reem used Factory to deal with the POST to handle the new state.  The POST identifying what it just did by the return. Different states are put into POST, so that new prospective verbs, without creating verbs for REST/HTTP can be used to advantage without breaking universal clients. Biggest issue with REST services is their lack of state, yet it is also one of their biggest strengths.  What happens is that the client takes up the often onerous task of handling all state, state machines, and other extraneous resource management.  All the GETs, POSTs, DELETEs, INSERTs get all pushed into abstraction.  My 2 cents is that this in a way ends up pushing a huge proprietary burden onto the REST services often removing the point of REST to be simple and to the point. WADL does provide discovery and some state control (sort of?) Statement made, "WADL" isn't needed.  The JSON, XML, or other client side returned data handles this. I then applied the law of 2 feet rule for myself and headed to finish up these notes, post to the Wiki, and figure out what I was going to do next.  For the original Wiki entry check it out here. I will be adding more to this post with a subsequent post.  Please do feel free to post your thoughts and ideas about this, as I am sure everyone in the session will have more for elaboration.

  Read the article

• YouSendIt Alternative?

  - by WuckaChucka

  Looking for a reasonably priced alternative to YouSendIt's exorbitant pricing for an embedded, unbranded (i.e. no "Uploads by SomeCompany" or at the very least, discrete, subtle co-branding) file upload solution for my client's print shop Website. To do what we want to do with YouSendIt, we're looking at a corporate account of $995 USD plus $29.99 USD monthly fee, that is only sold pro-rated, so you have to buy the entire year's worth. To me, this is just unacceptable considering the commodity pricing of storage and bandwidth nowadays. For data, we're looking at roughly 10MB per upload, with perhaps 250-1000 uploads per month, with transient data storage of no more than 30 days (and more than likely 1-2 business days) for a total of 10 GB transfer (upload) and 10 GB transfer (download, to the print shop) at the very max each month. Any ideas? Everything I've found through searching seems to be geared more towards personal file sharing and not for embedding into Websites. Thanks

  Read the article

• Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• Die individuelle Lizenz zum Erfolg

  - by A&C Redaktion

  Wer will schon mit anderen über einen Kamm geschoren werden? All unsere Partner sind auf sehr unterschiedliche Bereiche spezialisiert und arbeiten mit einem breiten Spektrum an Kunden, die wiederum eine Vielzahl besonderer Bedürfnisse mitbringen. Dieser Vielfalt entsprechend, bietet Oracle ein ausdifferenziertes Lizenzierungsmodell. Speziell für die unabhängigen Softwarepartner (ISVs) erläutert Senior Channel Manager Sven Jürgens im Gespräch mit Holger Pölzl, welche Form der Lizenzierung zu welchem Vorhaben passt. Neben der klassischen Full Use Lizenz gibt es beispielsweise noch deutlich günstigere Arten, von Application Specific Full Use (ASFU) oder Embedded Software Licensing (ESL) bis hin zu SAAS- oder Hosting-Angeboten. Welches Modell das richtige ist, entscheiden die beiden am liebsten im direkten Gespräch mit dem Partner. Kontaktieren Sie uns: Sven.Juergens-AT-oracle-DOT-com und Holger.Poelztl-AT-oracle-DOT-com

  Read the article

• Separate shaders from HTML file in WebGL

  - by Chris Smith

  I'm ramping up on WebGL and was wondering what is the best way to specify my vertex and fragment shaders. Looking at some tutorials, the shaders are embedded directly in the HTML. (And referenced via an ID.) For example: <script id="shader_1-fs" type="x-shader/x-fragment"> precision highp float; void main(void) { // ... } </script> <script id="shader_1-vs" type="x-shader/x-vertex"> attribute vec3 aVertexPosition; uniform mat4 uMVMatrix; // ... My question is, is it possible to have my shaders referenced in a separate file? (Ideally as plain text.) I presume this is straight forward in JavaScript. Is there essentially a way to do this: var shaderText = LoadRemoteFileOnSever('/shaders/shader_1.txt');

  Read the article

• Platform Builder: Disable the USB Driver Dialog

  - by Bruce Eitman

  For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller.   Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support.   So the printer quietly loads a driver, but then the other functions cause a dialog to be shown. One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it. Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients]       "DoNotPromptUser"=dword:0   Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.     Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• Package Manager Console For More Than Managing Packages

  - by Steve Michelotti

  Like most developers, I prefer to not have to pick up the mouse if I don’t have to. I use the Executor launcher for almost everything so it’s extremely rare for me to ever click the “Start” button in Windows. I also use shortcuts keys when I can so I don’t have to pick up the mouse. By now most people know that the Package Manager Console that comes with NuGet is PowerShell embedded inside of Visual Studio. It is based on its PowerConsole predecessor which was the first (that I’m aware of) to embed PowerShell inside of Visual Studio and give access to the Visual Studio automation DTE object. It does this through an inherent $dte variable that is automatically available and ready for use. This variable is also available inside of the NuGet Package Manager console. Adding a new class file to a Visual Studio project is one of those mundane tasks that should be easier. First I have to pick up the mouse. Then I have to right-click where I want it file to go and select “Add –> New Item…” or “Add –> Class…”   If you know the Ctrl+Shift+A shortcut, then you can avoid the mouse for adding a new item but you have to manually assign a shortcut for adding a new class. At this point it pops up a dialog just so I can enter the name of the class I want. Since this is one of the most common tasks developers do, I figure there has to be an easier way and a way that avoids picking up the mouse and popping up dialogs. This is where your embedded PowerShell prompt in Visual Studio comes in. The first thing you should do is to assign a keyboard shortcut so that you can get a PowerShell prompt (i.e., the Package Manager console) quickly without ever picking up the mouse. I assign “Ctrl+P, Ctrl+M” because “P + M” stands for “Package Manager” so it is easy to remember:   At this point I can type this command to add a new class: PM> $dte.ItemOperations.AddNewItem("Code\Class", "Foo.cs") which will result in the class being added: At this point I’ve satisfied my original goal of not having to pick up a mouse and not having the “Add New Item” dialog pop up. However, having to remember that $dte method call is not very user-friendly at all. The best thing to do is to make this a re-usable function that always loads when Visual Studio starts up. There is a $profile variable that you can use to figure out where that location is for your machine: PM> $profile C:\Users\steve.michelotti\Documents\WindowsPowerShell\NuGet_profile.ps1 If the NuGet_profile.ps1 file does not already exist, you can just create it yourself and place it in the directory. Now you can put a function inside like this: 1: function addClass($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $dte.ItemOperations.AddNewItem("Code\Class", $className) 8: } Since it’s in the NuGet_profile.ps1 file, this function will automatically always be available for me after starting Visual Studio. Now I can simply do this: PM> addClass Foo At this point, we have a *very* nice developer experience. All I did to add a new class was: “Ctrl-P, Ctrl-M”, then “addClass Foo”. No mouse, no pop up dialogs, no complex commands to remember. In fact, PowerShell gives you auto-completion as well. If I type “addc” followed by [TAB], then intellisense pops up: You can see my custom function appear in intellisense above. Now I can type the next letter “c” and [TAB] to auto-complete the command. And if that’s still too many key strokes for you, then you can create your own PowerShell custom alias for your function like this: PM> Set-Alias addc addClass PM> addc Foo While all this is very useful, I did run into some issues which prompted me to make even further customization. This command will add the new class file to the current active directory. Depending on your context, this may not be what you want. For example, by convention all view model objects go in the “Models” folder in an MVC project. So if the current document is in the Controllers folder, it will add your class to that folder which is not what you want. You want it to always add it to the “Models” folder if you are adding a new model in an MVC project. For this situation, I added a new function called “addModel” which looks like this: 1: function addModel($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $modelsDir = $dte.ActiveSolutionProjects[0].UniqueName.Replace(".csproj", "") + "\Models" 8: $dte.Windows.Item([EnvDTE.Constants]::vsWindowKindSolutionExplorer).Activate() 9: $dte.ActiveWindow.Object.GetItem($modelsDir).Select([EnvDTE.vsUISelectionType]::vsUISelectionTypeSelect) 10: $dte.ItemOperations.AddNewItem("Code\Class", $className) 11: } First I figure out the path to the Models directory on line #7. Then I activate the Solution Explorer window on line #8. Then I make sure the Models directory is selected so that my context is correct when I add the new class and it will be added to the Models directory as desired. These are just a couple of examples for things you can do with the PowerShell prompt that you have available in the Package Manager console. As developers we spend so much time in Visual Studio, why would you not customize it so that you can work in whatever way you want to work?! The next time you’re not happy about the way Visual Studio makes you do a particular task – automate it! The sky is the limit.

  Read the article

• Sprite animation in openGL - Some frames are being skipped

  - by Sid

  Earlier, I was facing problems on implementing sprite animation in openGL ES. Now its being sorted up. But the problem that i am facing now is that some of my frames are being skipped when a bullet(a circle) strikes on it. What I need : A sprite animation should stop at the last frame without skipping any frame. What I did : Collision Detection function and working properly. PS : Everything is working fine but i want to implement the animation in OPENGL ONLY. Canvas won't work in my case. ------------------------ EDIT----------------------- My sprite sheet. Consider the animation from Left to right and then from top to bottom Here is an image for a better understanding. My spritesheet ... class FragileSquare{ FloatBuffer fVertexBuffer, mTextureBuffer; ByteBuffer mColorBuff; ByteBuffer mIndexBuff; int[] textures = new int[1]; public boolean beingHitFromBall = false; int numberSprites = 20; int columnInt = 4; //number of columns as int float columnFloat = 4.0f; //number of columns as float float rowFloat = 5.0f; int oldIdx; public FragileSquare() { // TODO Auto-generated constructor stub float vertices [] = {-1.0f,1.0f, //byte index 0 1.0f, 1.0f, //byte index 1 //byte index 2 -1.0f, -1.0f, 1.0f,-1.0f}; //byte index 3 float textureCoord[] = { 0.0f,0.0f, 0.25f,0.0f, 0.0f,0.20f, 0.25f,0.20f }; byte indices[] = {0, 1, 2, 1, 2, 3 }; ByteBuffer byteBuffer = ByteBuffer.allocateDirect(4*2 * 4); // 4 vertices, 2 co-ordinates(x,y) 4 for converting in float byteBuffer.order(ByteOrder.nativeOrder()); fVertexBuffer = byteBuffer.asFloatBuffer(); fVertexBuffer.put(vertices); fVertexBuffer.position(0); ByteBuffer byteBuffer2 = ByteBuffer.allocateDirect(textureCoord.length * 4); byteBuffer2.order(ByteOrder.nativeOrder()); mTextureBuffer = byteBuffer2.asFloatBuffer(); mTextureBuffer.put(textureCoord); mTextureBuffer.position(0); } public void draw(GL10 gl){ gl.glFrontFace(GL11.GL_CW); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(1,GL10.GL_FLOAT, 0, fVertexBuffer); gl.glEnable(GL10.GL_TEXTURE_2D); if(MyRender.flag2==1){ /** Collision has taken place*/ int idx = oldIdx==(numberSprites-1) ? (numberSprites-1) : (int)((System.currentTimeMillis()%(200*numberSprites))/200); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glTranslatef((idx%columnInt)/columnFloat, (idx/columnInt)/rowFloat, 0); gl.glMatrixMode(GL10.GL_MODELVIEW); oldIdx = idx; } gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); //4 gl.glTexCoordPointer(2, GL10.GL_FLOAT,0, mTextureBuffer); //5 gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); //7 gl.glFrontFace(GL11.GL_CCW); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_MODELVIEW); } public void loadFragileTexture(GL10 gl, Context context, int resource) { Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), resource); gl.glGenTextures(1, textures, 0); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); bitmap.recycle(); }

  Read the article

• How to play Minecraft Classic?

  - by djeikyb

  First off, I've read through this question: How to install minecraft?. I'm interested in the free web-embedded version (for demo purposes), not the paid and downloaded .jar file. I removed the open-java whatever that Ubuntu prefers to use. I installed sun-java6-jre. Then I ran sudo update-alternatives --config java to ensure I was using Sun's Java. Restarted my browsers, then tried to start the game from: http://www.minecraft.net/play.jsp It pops a prompt to make sure I really want to allow direct interaction between minecraft.net and my computer, I agree. The in browser display mumbles something about loading a library, then darkness. The page doesn't crash, ps shows the java plugin process, all seems well except the game doesn't load. I see the same behaviour on Chromium 11.0.662.0 (73963) as Firefox 4 RC1.

  Read the article

• Goto for the Java Programming Language

  - by darcy

  Work on JDK 8 is well-underway, but we thought this late-breaking JEP for another language change for the platform couldn't wait another day before being published. Title: Goto for the Java Programming Language Author: Joseph D. Darcy Organization: Oracle. Created: 2012/04/01 Type: Feature State: Funded Exposure: Open Component: core/lang Scope: SE JSR: 901 MR Discussion: compiler dash dev at openjdk dot java dot net Start: 2012/Q2 Effort: XS Duration: S Template: 1.0 Reviewed-by: Duke Endorsed-by: Edsger Dijkstra Funded-by: Blue Sun Corporation Summary Provide the benefits of the time-testing goto control structure to Java programs. The Java language has a history of adding new control structures over time, the assert statement in 1.4, the enhanced for-loop in 1.5,and try-with-resources in 7. Having support for goto is long-overdue and simple to implement since the JVM already has goto instructions. Success Metrics The goto statement will allow inefficient and verbose recursive algorithms and explicit loops to be replaced with more compact code. The effort will be a success if at least twenty five percent of the JDK's explicit loops are replaced with goto's. Coordination with IDE vendors is expected to help facilitate this goal. Motivation The goto construct offers numerous benefits to the Java platform, from increased expressiveness, to more compact code, to providing new programming paradigms to appeal to a broader demographic. In JDK 8, there is a renewed focus on using the Java platform on embedded devices with more modest resources than desktop or server environments. In such contexts, static and dynamic memory footprint is a concern. One significant component of footprint is the code attribute of class files and certain classes of important algorithms can be expressed more compactly using goto than using other constructs, saving footprint. For example, to implement state machines recursively, some parties have asked for the JVM to support tail calls, that is, to perform a complex transformation with security implications to turn a method call into a goto. Such complicated machinery should not be assumed for an embedded context. A better solution is just to expose to the programmer the desired functionality, goto. The web has familiarized users with a model of traversing links among different HTML pages in a free-form fashion with some state being maintained on the side, such as login credentials, to effect behavior. This is exactly the programming model of goto and code. While in the past this has been derided as leading to "spaghetti code," spaghetti is a tasty and nutritious meal for programmers, unlike quiche. The invokedynamic instruction added by JSR 292 exposes the JVM's linkage operation to programmers. This is a low-level operation that can be leveraged by sophisticated programmers. Likewise, goto is a also a low-level operation that should not be hidden from programmers who can use more efficient idioms. Some may object that goto was consciously excluded from the original design of Java as one of the removed feature from C and C++. However, the designers of the Java programming languages have revisited these removals before. The enum construct was also left out only to be added in JDK 5 and multiple inheritance was left out, only to be added back by the virtual extension method methods of Project Lambda. As a living language, the needs of the growing Java community today should be used to judge what features are needed in the platform tomorrow; the language should not be forever bound by the decisions of the past. Description From its initial version, the JVM has had two instructions for unconditional transfer of control within a method, goto (0xa7) and goto_w (0xc8). The goto_w instruction is used for larger jumps. All versions of the Java language have supported labeled statements; however, only the break and continue statements were able to specify a particular label as a target with the onerous restriction that the label must be lexically enclosing. The grammar addition for the goto statement is: GotoStatement: goto Identifier ; The new goto statement similar to break except that the target label can be anywhere inside the method and the identifier is mandatory. The compiler simply translates the goto statement into one of the JVM goto instructions targeting the right offset in the method. Therefore, adding the goto statement to the platform is only a small effort since existing compiler and JVM functionality is reused. Other language changes to support goto include obvious updates to definite assignment analysis, reachability analysis, and exception analysis. Possible future extensions include a computed goto as found in gcc, which would replace the identifier in the goto statement with an expression having the type of a label. Testing Since goto will be implemented using largely existing facilities, only light levels of testing are needed. Impact Compatibility: Since goto is already a keyword, there are no source compatibility implications. Performance/scalability: Performance will improve with more compact code. JVMs already need to handle irreducible flow graphs since goto is a VM instruction.

  Read the article

• Threading Overview

  - by ACShorten

  One of the major features of the batch framework is the ability to support multi-threading. The multi-threading support allows a site to increase throughput on an individual batch job by splitting the total workload across multiple individual threads. This means each thread has fine level control over a segment of the total data volume at any time. The idea behind the threading is based upon the notion that "many hands make light work". Each thread takes a segment of data in parallel and operates on that smaller set. The object identifier allocation algorithm built into the product randomly assigns keys to help ensure an even distribution of the numbers of records across the threads and to minimize resource and lock contention. The best way to visualize the concept of threading is to use a "pie" analogy. Imagine the total workset for a batch job is a "pie". If you split that pie into equal sized segments, each segment would represent an individual thread. The concept of threading has advantages and disadvantages: Smaller elapsed runtimes - Jobs that are multi-threaded finish earlier than jobs that are single threaded. With smaller amounts of work to do, jobs with threading will finish earlier. Note: The elapsed runtime of the threads is rarely proportional to the number of threads executed. Even though contention is minimized, some contention does exist for resources which can adversely affect runtime. Threads can be managed individually – Each thread can be started individually and can also be restarted individually in case of failure. If you need to rerun thread X then that is the only thread that needs to be resubmitted. Threading can be somewhat dynamic – The number of threads that are run on any instance can be varied as the thread number and thread limit are parameters passed to the job at runtime. They can also be configured using the configuration files outlined in this document and the relevant manuals.Note: Threading is not dynamic after the job has been submitted Failure risk due to data issues with threading is reduced – As mentioned earlier individual threads can be restarted in case of failure. This limits the risk to the total job if there is a data issue with a particular thread or a group of threads. Number of threads is not infinite – As with any resource there is a theoretical limit. While the thread limit can be up to 1000 threads, the number of threads you can physically execute will be limited by the CPU and IO resources available to the job at execution time. Theoretically with the objects identifiers evenly spread across the threads the elapsed runtime for the threads should all be the same. In other words, when executing in multiple threads theoretically all the threads should finish at the same time. Whilst this is possible, it is also possible that individual threads may take longer than other threads for the following reasons: Workloads within the threads are not always the same - Whilst each thread is operating on the roughly the same amounts of objects, the amount of processing for each object is not always the same. For example, an account may have a more complex rate which requires more processing or a meter has a complex amount of configuration to process. If a thread has a higher proportion of objects with complex processing it will take longer than a thread with simple processing. The amount of processing is dependent on the configuration of the individual data for the job. Data may be skewed – Even though the object identifier generation algorithm attempts to spread the object identifiers across threads there are some jobs that use additional factors to select records for processing. If any of those factors exhibit any data skew then certain threads may finish later. For example, if more accounts are allocated to a particular part of a schedule then threads in that schedule may finish later than other threads executed. Threading is important to the success of individual jobs. For more guidelines and techniques for optimizing threading refer to Multi-Threading Guidelines in the Batch Best Practices for Oracle Utilities Application Framework based products (Doc Id: 836362.1) whitepaper available from My Oracle Support

  Read the article

• Java Day Tokyo 2014 ????????

  - by OTN-J Master

  5?22?(?)???????????????Java Day Tokyo 2014?????????????????Create the Future with Java??????Java?????????????????????Java???????????????????????????????????Java 8??Java 8????????(3?)??????????????????????????????????????? ¦ IoT?????Java-???????????????????????????Java?????????????????????????????? (????Nandini Ramani?Cameron Purdy?Simon Ritter)Nandini Ramani??Java SE?Java ME??Cameron Purdy?Java EE??Simon Ritter?Java????????????????????????????????????????????Java SE 8?????????????Oracle Java for MIPS(32???/64????)????????????????????????OTN?????????????????????????Java????????????????????????¦??????????????????IoT????????3????????????????????JavaOne 2013???????????????????????????????????????????????????????·Lego Mindstorms?????Stephen Chin(Java Technology Ambassador)???????????Lego Duke Segway????Lego Mindstorms??????????????????Duke???2????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????????Duke Segway????????????????Duke?????????????????????????????????????????????? ·DukePadRaspberry Pi ??????Java SE Embedded?????????????????????????????????????JavaFX???????????????????????????????????????????????????????????(??????????????)????????????????????????????????????????????????????????????????????????? ·Chess RobotDukePad????????????????????????????????????DukePad??????????????????????????????????????????????????????????????¦Java???????2015??Java????20???????(?????????!)???Java?????????????????????????????????????????Java???????????????????????????????????????????????????????????????????????????????¦Java Magazine ????Java????????????????????????????????????????????????????????????Java 8 ?????????????????IoT???????????????????????????????????????????????????????????????????????????????????????????????Java????????????????????????????????????????????????????????????????????????Java Magazine????????????????????????????????????Java Magazine ????????OTN?????????Java????????????PDF??????eBook???????????????????? ??????????Facebook???:Java Day TokyoJava Day Tokyo 2013

  Read the article

• C#: A "Dumbed-Down" C++?

  - by James Michael Hare

  I was spending a lovely day this last weekend watching my sons play outside in one of the better weekends we've had here in Saint Louis for quite some time, and whilst watching them and making sure no limbs were broken or eyes poked out with sticks and other various potential injuries, I was perusing (in the correct sense of the word) this month's MSDN magazine to get a sense of the latest VS2010 features in both IDE and in languages. When I got to the back pages, I saw a wonderful article by David S. Platt entitled, "In Praise of Dumbing Down"  (msdn.microsoft.com/en-us/magazine/ee336129.aspx).  The title captivated me and I read it and found myself agreeing with it completely especially as it related to my first post on divorcing C++ as my favorite language. Unfortunately, as Mr. Platt mentions, the term dumbing-down has negative connotations, but is really and truly a good thing.  You are, in essence, taking something that is extremely complex and reducing it to something that is much easier to use and far less error prone.  Adding safeties to power tools and anti-kick mechanisms to chainsaws are in some sense "dumbing them down" to the common user -- but that also makes them safer and more accessible for the common user.  This was exactly my point with C++ and C#.  I did not mean to infer that C++ was not a useful or good language, but that in a very high percentage of cases, is too complex and error prone for the job at hand. Choosing the correct programming language for a job is a lot like choosing any other tool for a task.  For example: if I want to dig a French drain in my lawn, I can attempt to use a huge tractor-like backhoe and the job would be done far quicker than if I would dig it by hand.  I can't deny that the backhoe has the raw power and speed to perform.  But you also cannot deny that my chances of injury or chances of severing utility lines or other resources climb at an exponential rate inverse to the amount of training I may have on that machinery. Is C++ a powerful tool?  Oh yes, and it's great for those tasks where speed and performance are paramount.  But for most of us, it's the wrong tool.  And keep in mind, I say this even though I have 17 years of experience in using it and feel myself highly adept in utilizing its features both in the standard libraries, the STL, and in supplemental libraries such as BOOST.  Which, although greatly help with adding powerful features quickly, do very little to curb the relative dangers of the language. So, you may say, the fault is in the developer, that if the developer had some higher skills or if we only hired C++ experts this would not be an issue.  Now, I will concede there is some truth to this.  Obviously, the higher skilled C++ developers you hire the better the chance they will produce highly performant and error-free code.  However, what good is that to the average developer who cannot afford a full stable of C++ experts? That's my point with C#:  It's like a kinder, gentler C++.  It gives you nearly the same speed, and in many ways even more power than C++, and it gives you a much softer cushion for novices to fall against if they code less-than-optimally.  A bug is a bug, of course, in any language, but C# does a good job of hiding and taking on the task of handling almost all of the resource issues that make C++ so tricky.  For my money, C# is much more maintainable, more feature-rich, second only slightly in performance, faster to market, and -- last but not least -- safer and easier to use.  That's why, where I work, I much prefer to see the developers moving to C#.  The quantity of bugs is much lower, and we don't need to hire "experts" to achieve the same results since the language itself handles those resource pitfalls so prevalent in poorly written C++ code.  C++ will still have its place in the world, and I'm sure I'll still use it now and again where it is truly the correct tool for the job, but for nearly every other project C# is a wonderfully "dumbed-down" version of C++ -- in the very best sense -- and to me, that's the smart choice.

  Read the article

• Live Event: OTN Architect Day: Cloud Computing - Two weeks and counting

  - by Bob Rhubart

  In just two weeks architects and others will gather at the Oracle Conference Center in Redwood Shores, CA for the first Oracle Technology Network Architect Day event of 2013. This event focuses on Cloud Computing, and features sessions specifically focused on real-world examples of the implementation of cloud computing. When: Tuesday July 9, 2013              8:30am - 12:30pm Where: Oracle Conference Center              350 Oracle Pkwy              Redwood City, CA 94065 Register now. It's free! Here's the agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Michael Timpanaro-Perrotta Director, Product Management, Oracle Database Cloud New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Michael Timpanaro-Perrotta respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• Live Event: OTN Architect Day: Cloud Computing - Two weeks and counting

  - by Bob Rhubart

  In just two weeks architects and others will gather at the Oracle Conference Center in Redwood Shores, CA for the first Oracle Technology Network Architect Day event of 2013. This event focuses on Cloud Computing, and features sessions specifically focused on real-world examples of the implementation of cloud computing. When: Tuesday July 9, 2013              8:30am - 12:30pm Where: Oracle Conference Center              350 Oracle Pkwy              Redwood City, CA 94065 Register now. It's free! Here's the agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Michael Timpanaro-Perrotta Director, Product Management, Oracle Database Cloud New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Michael Timpanaro-Perrotta respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• Displaying google analytics data on my website

  - by anon-user0

  I sale adspace for my websites directly to the advertisers. I ad page where I want to show google anaylytics information that update automatically without me having to manually update everyday or every month. Something like this: http://wstats.net/en/website/riverplate.com#stat_trafic I don't want to use embedded or iframed third party services. I know google has public API and you can connect it to google graph API to to show pretty graphs. There is a tutorial by google here on how to do it: https://developers.google.com/analytics/resources/articles/gdataAnalyticsCharts Few problems: I don't know much javascript The javascript seems to prompt for authntication as opposed to login automatically. (from my understanding by reading comments on the code) Does anyone know of any ready made script that does what I am looking for or know how I can fix this code that will allow me to display analytic info without authenticating? Thanks.

  Read the article

• Must-see sessions at TCUK11

  - by Roger Hart

  Technical Communication UK is probably the best professional conference I've been to. Last year, I spoke there on content strategy, and this year I'll be co-hosting a workshop on embedded user assistance. Obviously, I'd love people to come along to that; but there are some other sessions I'd like to flag up for anybody thinking of attending. Tuesday 20th Sept - workshops This will be my first year at the pre-conference workshop day, and I'm massively glad that our workshop hasn't been scheduled along-side the one I'm really interested in. My picks: It looks like you're embedding user assistance. Would you like help? My colleague Dom and I are presenting this one. It's our paen to Clippy, to the brilliant idea he represented, and the crashing failure he was. Less precociously, we'll be teaching embedded user assistance, Red Gate style. Statistics without maths: acquiring, visualising and interpreting your data This doesn't need to do anything apart from what it says on the tin in order to be gold dust. But given the speakers, I suspect it will. A data-informed approach is a great asset to technical communications, so I'd recommend this session to anybody event faintly interested. The speakers here have a great track record of giving practical, accessible introductions to big topics. Go along. Wednesday 21st Sept - day one There's no real need to recommend the keynote for a conference, but I will just point out that this year it's Google's Patrick Hofmann. That's cool. You know what else is cool: Focus on the user, the rest follows An intro to modelling customer experience. This is a really exciting area for tech comms, and potentially touches on one of my personal hobby-horses: the convergence of technical communication and marketing. It's all part of delivering customer experience, and knowing what your users need lets you help them, sell to them, and delight them. Content strategy year 1: a tale from the trenches It's often been observed that content strategy is great at banging its own drum, but not so hot on compelling case studies. Here you go, folks. This is the presentation I'm most excited about so far. On a mission to communicate! Skype help their users communicate, but how do they communicate with them? I guess we'll find out. Then there's the stuff that I'm not too excited by, but you might just be. The standards geeks and agile freaks can get together in a presentation on the forthcoming ISO standards for agile authoring. Plus, there's a session on VBA for tech comms. I do have one gripe about day 1. The other big UK tech comms conference, UA Europe, have - I think - netted the more interesting presentation from Ellis Pratt. While I have no doubt that his TCUK case study on producing risk assessments will be useful, I'd far rather go to his talk on game theory for tech comms. Hopefully UA Europe will record it. Thursday 22nd Sept - day two Day two has a couple of slots yet to be confirmed. The rumour is that one of them will be the brilliant "Questions and rants" session from last year. I hope so. It's not ranting, but I'll be going to: RTFMobile: beyond stating the obvious Ultan O'Broin is an engaging speaker with a lot to say, and mobile is one of the most interesting and challenging new areas for tech comms. Even if this weren't a research-based presentation from a company with buckets of technology experience, I'd be going. It is, and you should too. Pattern recognition for technical communicators One of the best things about TCUK is the tendency to include sessions that tackle the theoretical and bring them towards the practical. Kai and Chris delivered cracking and well-received talks last year, and I'm looking forward to seeing what they've got for us on some of the conceptual underpinning of technical communication. Developing an interactive non-text learning programme Annoyingly, this clashes with Pattern Recognition, so I hope at least one of the streams is recorded again this year. The idea of communicating complex information without words us fascinating and this sounds like a great example of this year's third stream: "anything but text". For the localization and DITA crowds, there's rich pickings on day two, though I'm not sure how many of those sessions I'm interested in. In the 13:00 - 13:40 slot, there's an interesting clash between Linda Urban on re-use and training content, and a piece on minimalism I'm sorely tempted by. That's my pick of #TCUK11. I'll be doing a round-up blog after the event, and probably talking a bit more about it beforehand. I'm also reliably assured that there are still plenty of tickets.

  Read the article

• Simple Scripting for your Exalogic Storage

  - by Trond Strømme

  As part of my job in Oracle ACS (Advanced Customer Services) I'm handling lots of different systems and customers. Among the recent systems I worked with have been Oracle's Exalogic engineered systems. One of the things I'd never had much exposure to as a system developer/architect/middleware guy/Java dude has been storage; outside of consuming it for my photography needs.. Well, I'm always ready for a new challenge... I'd downloaded the 7000 series storage simulator when it was released in the good old Sun days, found it fun and instructive to play around with, but as I never touched storage in any way (besides consuming it..) I forgot about it. A couple of years ago when I started working with Exalogic engineered systems it again came into light as an invaluable learning and testing tool for the embedded storage in an Exalogic;  Oracle's Sun ZFS Storage 7320 Appliance.  aaaanyway... I've been "booted" into a part-time role as the interim storage/system admin/middleware/Java guy for a client and found I needed to create the occasional report or summary or whatever.. of what's using the storage in the 7320 (as default configured for an Exalogic, 40T of disk in a mirrored configuration, yielding 18T of actual space.) Reading the nice documentation and some articles on the Oracle Technology Network I saw great possibilities with the embedded ECMAScript3/JavaScript engine in the 7000 series.  In my personal opinion anyone who's dealing with Exalogic administration, or exposed to any of the 7000 series of storage appliances and servers that Oracle offers should have a VirtualBox instance of it kicking around. For development and testing it's a fantastic tool. (It can save you from explaining (most) of the embarrassing FAILS you can do if you test something in a production system to your management...) So download, and install.  A small sidestep, if after firing up the 7000 series simulator in VirtualBox you've forgotten what it's IP address is, the following will sort you out if you log in directly via the running VirtualBox VM. So in my case I can ssh to 192.168.56.101 or point a browser to https://192.168.56.101:215 to log into the storage appliance. One simple way of executing a script on the 7320 is to ssh to the device and redirecting a file with the script in it to ssh. ssh [email protected] < myscript.js One question I got from my client and the people who will take over the systems was: "how can we see the quotas and allocations for all projects/shares in one easy go so we don't have to go navigating around in the BUI for all the hundreds of shares the 7320 is hosting just to check if anything is running dry?" Easy! JavaScript time, VirtualBox and emacs! //NOTE! this script is available 'as is' It has ben run on a couple of 7320's, (running 2010.08.17.3.0,1-1.25 & // 2011.04.24.1.0,1-1.8) a 7420 and the VB image, but I personally //offer no guarantee whatsoever that it won't make your server topple, catch fire or in any way go pear shaped.. //run at your own risk or learn from my code and or mistakes.. script run('cd /'); run('shares'); //get all projects: proj = list(); function spaceToGig(bytes){ return bytes/1073741824; //convert bytes to GB } function fullInPercent(quota, space_data){ tmp = (space_data/quota)*100; return tmp; } //print header, slightly good looking printf(" %s/%-15s %8s(GB) %7s(GB) %5s(GB) %7s(GB) %3s\n","Project", "Share","Quota","Ref", "Snap", "Total","%full"); printf("-------------------------------------------------------------------------------\n") //for each project, get all shares. check for quota and calculate percentage and human readable figures.. for (i=0;i<proj.length;i++){ run('select ' + proj[i]); //get all shares for a project var pshares = list(); //for each share get quota properties for (j=0;j<pshares.length;j++){ run('select ' + pshares[j]); quota = get('quota'); //properties associated with a share or inherited from a project spaceData = get('space_data'); spaceSnap = get('space_snapshots'); spaceTotal = get('space_total'); if(quota>0){ //has quota printf(" %s/%-15s \t%4.2fGB\t%.2fGB\t%.2fGB\t%.2fGB\t%5.2f%%\n",proj[i], pshares[j],spaceToGig(quota),spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),fullInPercent(quota,spaceTotal)); }else{ //no quota printf(" %s/%-15s \t%8s\t%.2fGB\t%.2fGB\t%.2fGB\t%s\n",proj[i],pshares[j], "N/A", spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),"N/A"); } run('cd ..'); } run('done'); } The resulting output should look something like this: Project/Share Quota(GB) Ref(GB) Snap(GB) Total(GB) %full ------------------------------------------------------------------------------- ACSExalogicSystem/domains N/A 0.04GB 0.00GB 0.04GB N/A ACSExalogicSystem/logs N/A 0.01GB 0.00GB 0.01GB N/A ACSExalogicSystem/nodemgrs N/A 0.00GB 0.00GB 0.00GB N/A ACSExalogicSystem/stores N/A 0.04GB 0.00GB 0.04GB N/A ***_dev/FMW_***_1 133GB 4.24GB 0.01GB 4.25GB 3.19% ***_dev/FMW_***_2 N/A 4.25GB 0.01GB 4.26GB N/A ***_dev/applications 10GB 0.00GB 0.00GB 0.00GB 0.00% ***_dev/domains 50GB 10.75GB 3.55GB 14.30GB 28.61% ***_dev/logs 20GB 0.32GB 0.01GB 0.33GB 1.66% ***_dev/softwaredepot 20GB 4.15GB 0.00GB 4.15GB 20.73% ***_dev/stores 20GB 0.01GB 0.00GB 0.01GB 0.05% ###_dev/FMW_###_1 400GB 17.63GB 0.12GB 17.75GB 4.44% ###_dev/applications N/A 0.00GB 0.00GB 0.00GB N/A ###_dev/domains 120GB 14.21GB 5.53GB 19.74GB 16.45% ###_dev/logs 15GB 0.00GB 0.00GB 0.00GB 0.00% ###_dev/softwaredepot 250GB 73.55GB 0.02GB 73.57GB 29.43% …snip My apologies if the output is a bit mis-aligned here and there, I only bothered making it look good, not perfect :/ I also removed some of the project names (*,#)

  Read the article

• Modernizr Rocks HTML5

  - by Laila

  HTML5 is a moving target.  At the moment, we don't know what will be in future versions.  In most circumstances, this really matters to the developer. When you're using Adobe Air, you can be reasonably sure what works, what is there, and what isn't, since you have a version of the browser built-in. With Metro, you can assume that you're going to be using at least IE 10.   If, however,  you are using HTML5 in a web application, then you are going to rely heavily on Feature Detection.  Feature-Detection is a collection of techniques that tell you, via JavaScript, whether the current browser has this feature natively implemented or not Feature Detection isn't just there for the esoteric stuff such as  Geo-location,  progress bars,  <canvas> support,  the new <input> types, Audio, Video, web workers or storage, but is required even for semantic markup, since old browsers make a pigs ear out of rendering this.  Feature detection can't rely just on reading the browser version and inferring from that what works. Instead, you must use JavaScript to check that an HTML5 feature is there before using it.  The problem with relying on the user-agent is that it takes a lot of historical data  to work out what version does what, and, anyway, the user-agent can be, and sometimes is, spoofed. The open-source library Modernizr  is just about the most essential  JavaScript library for anyone using HTML5, because it provides APIs to test for most of the CSS3 and HTML5 features before you use them, and is intelligent enough to alter semantic markup into 'legacy' 'markup  using shims  on page-load  for old browsers. It also allows you to check what video Codecs are installed for playing video. It also provides media queries  and conditional resource-loading (formerly YepNope.js.).  Generally, Modernizr gives you the choice of what you do about browsers that don't support the feature that you want. Often, the best choice is graceful degradation, but the resource-loading feature allows you to dynamically load JavaScript Shims to replace the standard API for missing or defective HTML5 functionality, called 'PolyFills'.  As the Modernizr site says 'Yes, not only can you use HTML5 today, but you can use it in the past, too!' The evolutionary progress of HTML5  requires a more defensive style of JavaScript programming where the programmer adopts a mindset of fearing the worst ( IE 6)  rather than assuming the best, whilst exploiting as many of the new HTML features as possible for the requirements of the site or HTML application.  Why would anyone want the distraction of developing their own techniques to do this when  Modernizr exists to do this for you? Laila

  Read the article

• Using WebStorm for Razor Syntax MVC

  - by Jay Stevens

  I am building a lot of client-side heavy SPA-like apps with VS2010 and MVC3/4. VS2010 Javascript/HTML/CSS editing (mostly javascript) is interminably slow and sluggish. I'd love to use something like JetBrains' WebStorm to edit my .CSHTML files (with embedded javascript, etc. because I am using RAzor to pop in URL names, etc.) WebStorm seems to have all of the things I want.. better language recognition ("intellisense") and the ability to integrate additional outside libraries into this (I'm using Kendo), etc. Is this possible? How do you get WebStorm to recognize the @"" invoked Razor language inserts? Any help or suggestions would be appreciated.

  Read the article

• Windows CE support forums

  - by Valter Minute

  As you may already know, microsoft is moving its communities to a new platform, based on web forums. The “old” USENET newsgroups are going to be replaced by web forums organized by categories. One for low-level platform development (for the guys working with Platform Builder), another one for native application development (for people writing their real-time applications in C/C++ or people using Silverlight for Windows Embedded) and, last but not least, a forum dedicated to managed application development (for people that are quickly developing their applications with the .NET Compact Framework). You can find the new forums here: http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact Read the “welcome” message to choose the best forum for your question and never forget that to have a good answer you should ask your question in a good way. Here you can find some suggestions about how you can ask questions (in newsgroup or forums): http://guruce.com/blogpost/howtoaskquestionsonnewsgroups (Thanks to Michel Verhagen for the article)

  Read the article

• Windows Azure Recipe: Social Web / Big Media

  - by Clint Edmonson

  With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Gumblar Attack

  Gumblar appears to be a combination of exploit scripts and malware. The scripts are embedded in .html, .js and .php files using obfuscated Javascript. They load malware content from Third Party sites without the user’s knowledge, while also stealing FTP credentials from the victim’s computer, which then allows it to spread and infect additional sites. Therefore, when someone visits such an infected site they get infected; if they have FTP credentials for a website on their machine then those sites get infected too. This explains the exponential growth of the exploit in such a short space of time.

  Read the article

• Which is better jplayer or jwplayer?

  - by aoi

  I need to make a video slideshow( slides to contain embedded video players and must play mp4 files), and I am kind of confused what would be the best free solution I can use? jplayer and jwplayer both seem good, but I can't find any comparisons between them, so I want some expert opinions and user experiences on these two. Also if there are any other free and open source solutions you can recommend, i am all ears ;) My requirements are: The player must be html5 with fallback to flash. Should support mp4 files as well as flv. Should also have the ability to double as an audio player(mp3) along with video capabilities. Should be lightweight and customizable easily in terms of looks.

  Read the article

• Jaw Dropping Kinect Integration With Combat Solider Game

  - by Gopinath

  The innovation in natural user interface for interacting with computers and other devices is riding on the brilliance of Microsoft’s XBox Kinect. The amazing technology behind Kinect lets users to plays games without touching game controllers. It enables users to control and interact with XBox 360 games using gestures(body movements) and spoken commands. Earlier we have seen Kinect in controlling Windows 7 PCs, simulating Da Vince application. At Microsoft’s E3 keynote, game publisher Ubisoft demoed Kinect integration with the future version of a Soldier game. The usage of Kinect to change weapons and play the game is jaw dropping. It is tough to explain the experience in words, check out the embedded demo video This article titled,Jaw Dropping Kinect Integration With Combat Solider Game, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >