multi monitor - Page 135

How to detect and configure an output with xrandr?

- by ysap

I have a DELL U2410 monitor connected to a Compaq 100B desktop equipped with an integrated AMD/ATI graphics card (AMD E-350). The installed O/S is Ubuntu 10.04 LTS. The computer is connected to the monitor via the DVI connection. The problem is that I cannot set the desktop resolution to the native 1920x1200. The maximum allowed resolution is 1600x1200. Doing some research I found about the xrandr utility. Unfortunately, when trying to use it I cannot configure it to the required resolution. First, it does not report the output name (which supposed to be DVI-0), saying default instead. Without it I cannot use the --fb option. The EDID utility seems to identify the monitor well. Here's the output from get-edid: # EDID version 1 revision 3 Section "Monitor" # Block type: 2:0 3:ff # Block type: 2:0 3:fc Identifier "DELL U2410" VendorName "DEL" ModelName "DELL U2410" # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd HorizSync 30-81 VertRefresh 56-76 # Max dot clock (video bandwidth) 170 MHz # DPMS capabilities: Active off:yes Suspend:yes Standby:yes Mode "1920x1200" # vfreq 59.950Hz, hfreq 74.038kHz DotClock 154.000000 HTimings 1920 1968 2000 2080 VTimings 1200 1203 1209 1235 Flags "-HSync" "+VSync" EndMode # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd EndSection but the xrandr -q command returns: Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 When I try to set the resolution, I get: $ xrandr --fb 1920x1200 xrandr: screen cannot be larger than 1600x1200 (desired size 1920x1200) $ xrandr --output DVI-0 --auto warning: output DVI-0 not found; ignoring How can I set the screen resolution to 1920x1200? Why doesn't xrandr identify the DVI-0 output? Note that the same computer running Ubuntu version higher than 10.04 detects the correct resolution with no problems. On this machine I cannot upgrade due to some legacy hardware compatibility problems. Also, I don't see any optional screen drivers available in the Hardware Drivers dialog. ---- UPDATE: following the answer to this question, I got some advance. Now the required mode is listed in the xrandr -q list, but I can't switch to that mode. Using the Monitors applet (which now shows the new mode), I get the response that: The selected configuration for displays could not be applied. Could not set the configuration to CRTC 262. From the command line it looks like this: $ cvt 1920 1200 60 # 1920x1200 59.88 Hz (CVT 2.30MA) hsync: 74.56 kHz; pclk: 193.25 MHz Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 (0x120) 193.0MHz h: width 1920 start 2056 end 2256 total 2592 skew 0 clock 74.5KHz v: height 1200 start 1203 end 1209 total 1245 clock 59.8Hz $ xrandr --addmode default 1920x1200_60.00 $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 59.8 $ xrandr --output default --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed Another piece of info (if it helps anyone): $ sudo lshw -c video *-display UNCLAIMED description: VGA compatible controller product: ATI Technologies Inc vendor: ATI Technologies Inc physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:c0000000-cfffffff(prefetchable) ioport:f000(size=256) memory:feb00000-feb3ffff

Read the article

Upgrading from MVC 1.0 to MVC2 in Visual Studio 2010 and VS2008.

- by Sam Abraham

With MVC2 officially released, I was involved in a few conversations regarding the feasibility of upgrading existing MVC 1.0 projects to quickly leverage the newly introduced MVC features. Luckily, Microsoft has proactively addressed this question for both Visual Studio 2008 and 2010 and many online resources discussing the upgrade process are a "Bing/Google Search" away. As I will happen to be speaking about MVC2 and Visual Studio 2010 at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (Check http://www.fladotnet.com for more info.), I decided to include a quick demo on upgrading the NerdDinner project (which I consider the "Hello MVC World" project) from MVC 1.0 to MVC2 using Visual studio 2010 to demonstrate how simple the upgrade process is. In the next few lines, I will be briefly touching on upgrading to MVC2 for Visual Studio 2008 then discussing, in more detail, the upgrade process using Visual Studio 2010 while highlighting the advantage of its multi-targeting support. Using Visual Studio 2008 SP1 For upgrading to MVC2 Using VS2008 SP1, a Microsoft White Paper [1] presents two approaches: 1- Using a provided automated upgrade tool, 2-Manually upgrading the project. I personally prefer using the automated tool although it comes with an "AS IS" disclaimer. For those brave souls, or those who end up with no luck using the tool, detailed manual upgrade steps are also provided as a second option. Backing up the project in question is a must regardless of which route one would take to upgrade. Using Visual Studio 2010 Life is much easier for developers who already adopted Visual Studio 2010. Simply opening the MVC 1.0 solution file brings up the upgrade wizard as shown in figures 1, 2, 3 and 4. As we proceed with the upgrade process, the wizard requests confirmation on whether we choose to upgrade our target framework version to .Net 4.0 or keep the existing .Net 3.5 (Figure 5). VS2010 does a good job with multi-targeting where we can still develop .Net 3.5 applications while leveraging all the new bells and whistles that VS2010 brings to the table (Multi-targeting enables us to develop with as early as .Net 2.0 in VS2010) Figure 1 - Open Solution File Using VS2010 Figure 2 - VS2010 Conversion Wizard Figure 3- Ready To Convert To VS2010 Confirmation Screen Figure 4 - VS2010 Solution Conversion Progress Figure 5 - Confirm Target Framework Upgrade In an attempt to make my demonstration realistic, I decided to opt to keep the project targeted to the .Net 3.5 Framework. After the successful completion of the conversion process, a quick sanity check revealed that the NerdDinner project is still targeted to the .Net 3.5 framework as shown in figure 6. Inspecting the Web.Config revealed that the MVC DLL version our code compiles against has been successfully upgraded to 2.0 (Figure 7) and hence we should now be able to leverage the newly introduced features in MVC2 and VS2010 with no effort or time invested on modifying existing code. Figure 6- Confirm Target Framework Remained .Net 3.5 Figure 7 - Confirm MVC DLL Version Has Been Upgraded In Conclusion, Microsoft has empowered developers with the tools necessary to quickly and seamlessly upgrade their MVC solutions to the newly released MVC2. The multi-targeting feature in Visual Studio 2010 enables us to adopt this latest and greatest development tool while supporting development in as early as .Net 2.0. References 1. "Upgrading an ASP.NET MVC 1.0 Application to ASP.NET MVC 2" http://www.asp.net/learn/whitepapers/aspnet-mvc2-upgrade-notes

Read the article

Install lubuntu 12.04 on an old Dell c600 : Video issues

- by maniat1k

I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

Read the article

Threading Overview

- by ACShorten

One of the major features of the batch framework is the ability to support multi-threading. The multi-threading support allows a site to increase throughput on an individual batch job by splitting the total workload across multiple individual threads. This means each thread has fine level control over a segment of the total data volume at any time. The idea behind the threading is based upon the notion that "many hands make light work". Each thread takes a segment of data in parallel and operates on that smaller set. The object identifier allocation algorithm built into the product randomly assigns keys to help ensure an even distribution of the numbers of records across the threads and to minimize resource and lock contention. The best way to visualize the concept of threading is to use a "pie" analogy. Imagine the total workset for a batch job is a "pie". If you split that pie into equal sized segments, each segment would represent an individual thread. The concept of threading has advantages and disadvantages: Smaller elapsed runtimes - Jobs that are multi-threaded finish earlier than jobs that are single threaded. With smaller amounts of work to do, jobs with threading will finish earlier. Note: The elapsed runtime of the threads is rarely proportional to the number of threads executed. Even though contention is minimized, some contention does exist for resources which can adversely affect runtime. Threads can be managed individually – Each thread can be started individually and can also be restarted individually in case of failure. If you need to rerun thread X then that is the only thread that needs to be resubmitted. Threading can be somewhat dynamic – The number of threads that are run on any instance can be varied as the thread number and thread limit are parameters passed to the job at runtime. They can also be configured using the configuration files outlined in this document and the relevant manuals.Note: Threading is not dynamic after the job has been submitted Failure risk due to data issues with threading is reduced – As mentioned earlier individual threads can be restarted in case of failure. This limits the risk to the total job if there is a data issue with a particular thread or a group of threads. Number of threads is not infinite – As with any resource there is a theoretical limit. While the thread limit can be up to 1000 threads, the number of threads you can physically execute will be limited by the CPU and IO resources available to the job at execution time. Theoretically with the objects identifiers evenly spread across the threads the elapsed runtime for the threads should all be the same. In other words, when executing in multiple threads theoretically all the threads should finish at the same time. Whilst this is possible, it is also possible that individual threads may take longer than other threads for the following reasons: Workloads within the threads are not always the same - Whilst each thread is operating on the roughly the same amounts of objects, the amount of processing for each object is not always the same. For example, an account may have a more complex rate which requires more processing or a meter has a complex amount of configuration to process. If a thread has a higher proportion of objects with complex processing it will take longer than a thread with simple processing. The amount of processing is dependent on the configuration of the individual data for the job. Data may be skewed – Even though the object identifier generation algorithm attempts to spread the object identifiers across threads there are some jobs that use additional factors to select records for processing. If any of those factors exhibit any data skew then certain threads may finish later. For example, if more accounts are allocated to a particular part of a schedule then threads in that schedule may finish later than other threads executed. Threading is important to the success of individual jobs. For more guidelines and techniques for optimizing threading refer to Multi-Threading Guidelines in the Batch Best Practices for Oracle Utilities Application Framework based products (Doc Id: 836362.1) whitepaper available from My Oracle Support

Read the article

How to get bearable 2D and 3D performance on AMD Radeon HD 6950?

- by l0b0

I have had an AMD Radeon HD 6950 (i.e., Cayman series) for a couple years now, and I have tried a lot of combinations of drivers and settings with terrible results. I'm completely at a loss as to how to proceed. The open source driver has much better 2D performance, but it offloads all OpenGL rendering to the CPU. What I've tried so far: All the latest stable Ubuntu releases in the period, plus one Linux Mint release. All the latest stable AMD Catalyst Proprietary Display Drivers, and currently 13.1. The unofficial wiki installation instructions for every Ubuntu version and the semi-official Ubuntu instructions. All the tips and tweaks I could find for Minecraft (Optifine, reducing settings to minimum), VLC (postprocessing at minimum, rendering at native video size), Catalyst Control Center (flipped every lever in there) and X11 (some binary toggles I can no longer remember). Results: Typically 13-15 FPS in Minecraft, 30 max (100+ in Windows with the same driver version). Around 10 FPS in Team Fortress 2 using the official Steam client. Choppy video playback, in Flash and with VLC. CPU use goes through the roof when rendering video (150% for 1080p on YouTube in Chromium, 100% for 1080p H264 in VLC). glxgears shows 12.5 FPS when maximized. fgl_glxgears shows 10 FPS when maximized. Hardware details from lshw: Motherboard ASUS P6X58D-E CPU Intel Core i7 CPU 950 @ 3.07GHz (never overclocked; 64 bit) 6 GB RAM Video card product "Cayman PRO [Radeon HD 6950]", vendor "Hynix Semiconductor (Hyundai Electronics)" 2 x 1920x1200 monitors, both connected with HDMI. I feel I must be missing something absolutely fundamental here. Is there no accelerated support for anything on 64-bit architectures? Does a dual monitor completely mess up the driver? $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6900 Series OpenGL version string: 4.2.11995 Compatibility Profile Context $ glxinfo | grep 'direct rendering' direct rendering: Yes I am currently using the open source driver, with the following results: Full frame rate and low CPU load when playing 1080p video. Black screen (but music in the background) in Team Fortress 2. Similar performance in Minecraft as the Catalyst driver. In hindsight obvious, since both end up offloading the rendering to the CPU. My /var/log/Xorg.0.log after upgrading to AMD Catalyst 13.1. Some possibly important lines: (WW) Falling back to old probe method for fglrx (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found The generated xorg.conf. The disabled "monitor" 0-DFP9 is actually an A/V receiver, which sometimes confuses the monitor drivers when turned on/off (but not in Windows). All three "monitor" devices are connected with HDMI. Edit: Chris Carter's suggestion to use the xorg-edgers PPA (Catalyst 13.1) resulted in some improvement, but still pretty bad performance overall: Minecraft stabilizes at 13-17 FPS, but at least the CPU load is "only" at 45-60%. Still 150% CPU use for 1080p video rendering on YouTube in Chromium. Massive improvement for 1080p H264 in VLC: 40-50% CPU use and no visible jitter glxgears performance about doubled to 25-30 FPS when maximized. fgl_glxgears still at ~10 FPS when maximized.

Read the article

Eclipse Indigo very slow on Kubuntu 12.04

- by herom

hello fellow ubuntu users! I have a really big problem with my Eclipse Indigo running on Kubuntu 12.04 32bit, Dell Vostro 3500, Intel(R) Core(TM) i5 CPU M480 @ 2.67 (as cat /proc/cpuinfo said). It has 4GB RAM. cat /proc/cpuinfo brings up the following: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.85 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 4 initial apicid : 4 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 5 initial apicid : 5 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: java -version brings the following: java version "1.7.0_04" Java(TM) SE Runtime Environment (build 1.7.0_04-b20) Java HotSpot(TM) Server VM (build 23.0-b21, mixed mode) it's the Oracle Java, not OpenJDK. I try to develop an Android application for GoogleTV and Eclipse is this slow, that it can't follow my typing (extreme lagging!!), but this issue makes it almost impossible! here is my eclipse.ini file: -startup plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.library plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.100.v20110505 -product org.eclipse.epp.package.java.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -Declipse.p2.unsignedPolicy=allow -Xms256m -Xmx512m -Xss4m -XX:PermSize=128m -XX:MaxPermSize=384m -XX:CompileThreshold=5 -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+CMSIncrementalPacing -XX:+UnlockExperimentalVMOptions -XX:+UseG1GC -XX:+UseFastAccessorMethods -XX:ReservedCodeCacheSize=64m -Dcom.sun.management.jmxremote has anybody faced the same problems? can anybody help me on this problem? it's really urgent as I'm sitting here at my company and am not able to do anything productive...

Read the article

X server with nvidia driver crashing: 12.04

- by Raster

My X server consistently crashes. It seems like this is happening when the X server is idle. This behaviour is new with 12.04. This is only happening on the second display of a multiseat system. Is there a configuration change I can make to stop this? X.Org X Server 1.11.3 Release Date: 2011-12-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu Current Operating System: Linux Desktop 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-29-generic root=/dev/mapper/Group1-Root ro ramdisk_size=512000 quiet splash vt.handoff=7 Build Date: 04 August 2012 01:51:23AM xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 2 22:37:06 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fcee86be846] 1: /usr/bin/X (0x7fcee8536000+0x18c6ea) [0x7fcee86c26ea] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fcee785c000+0xfcb0) [0x7fcee786bcb0] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x902a9) [0x7fcee154a2a9] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0xfd5e7) [0x7fcee15b75e7] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d6b92) [0x7fcee1990b92] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d74d5) [0x7fcee19914d5] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d767d) [0x7fcee199167d] 8: /usr/bin/X (0x7fcee8536000+0x1196ec) [0x7fcee864f6ec] 9: /usr/bin/X (0x7fcee8536000+0xe8ad5) [0x7fcee861ead5] 10: /usr/bin/X (0x7fcee8536000+0xe9d45) [0x7fcee861fd45] /etc/X11/xorg.conf Section "ServerLayout" Identifier "Desktop" Screen 0 "DesktopScreen" 0 0 InputDevice "DesktopMouse" "CorePointer" InputDevice "DesktopKeyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "ServerLayout" Identifier "Desktop2" Screen 1 "Desktop2Screen" 0 0 InputDevice "Desktop2Mouse" "CorePointer" InputDevice "Desktop2Keyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "Files" EndSection Section "ServerFlags" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false" Option "AllowMouseOpenFail" "on" Option "AllowEmptyInput" "on" Option "ZapWarning" "on" Option "HandleSepcialKeys" "off" # Zapping on Option "DRI2" "on" Option "Xinerama" "0" EndSection # Desktop Mouse Section "InputDevice" Identifier "DesktopMouse" Driver "evdev" Option "Device" "/dev/input/event3" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection # Desktop2 Mouse Section "InputDevice" Identifier "Desktop2Mouse" Driver "evdev" Option "Device" "/dev/input/event5" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "DesktopKeyboard" Driver "evdev" Option "Device" "/dev/input/event4" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "InputDevice" Identifier "Desktop2Keyboard" Driver "evdev" Option "Device" "/dev/input/event6" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "Monitor" Identifier "Desktop2Monitor" VendorName "Acer" ModelName "Acer G235H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "DesktopMonitor" VendorName "Acer" ModelName "Acer H213H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "EVGACard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" Option "Coolbits" "1" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "XFXCard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 9800" Option "Coolbits" "1" BusID "PCI:5:0:0" Screen 0 EndSection Section "Screen" Identifier "DesktopScreen" Device "EVGACard" Monitor "DesktopMonitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Desktop2Screen" Device "XFXCard" Monitor "Desktop2Monitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

Read the article

Concurrent Affairs

- by Tony Davis

I once wrote an editorial, multi-core mania, on the conundrum of ever-increasing numbers of processor cores, but without the concurrent programming techniques to get anywhere near exploiting their performance potential. I came to the.controversial.conclusion that, while the problem loomed for all procedural languages, it was not a big issue for the vast majority of programmers. Two years later, I still think most programmers don't concern themselves overly with this issue, but I do think that's a bigger problem than I originally implied. Firstly, is the performance boost from writing code that can fully exploit all available cores worth the cost of the additional programming complexity? Right now, with quad-core processors that, at best, can make our programs four times faster, the answer is still no for many applications. But what happens in a few years, as the number of cores grows to 100 or even 1000? At this point, it becomes very hard to ignore the potential gains from exploiting concurrency. Possibly, I was optimistic to assume that, by the time we have 100-core processors, and most applications really needed to exploit them, some technology would be around to allow us to do so with relative ease. The ideal solution would be one that allows programmers to forget about the problem, in much the same way that garbage collection removed the need to worry too much about memory allocation. From all I can find on the topic, though, there is only a remote likelihood that we'll ever have a compiler that takes a program written in a single-threaded style and "auto-magically" converts it into an efficient, correct, multi-threaded program. At the same time, it seems clear that what is currently the most common solution, multi-threaded programming with shared memory, is unsustainable. As soon as a piece of state can be changed by a different thread of execution, the potential number of execution paths through your program grows exponentially with the number of threads. If you have two threads, each executing n instructions, then there are 2^n possible "interleavings" of those instructions. Of course, many of those interleavings will have identical behavior, but several won't. Not only does this make understanding how a program works an order of magnitude harder, but it will also result in irreproducible, non-deterministic, bugs. And of course, the problem will be many times worse when you have a hundred or a thousand threads. So what is the answer? All of the possible alternatives require a change in the way we write programs and, currently, seem to be plagued by performance issues. Software transactional memory (STM) applies the ideas of database transactions, and optimistic concurrency control, to memory. However, working out how to break down your program into sufficiently small transactions, so as to avoid contention issues, isn't easy. Another approach is concurrency with actors, where instead of having threads share memory, each thread runs in complete isolation, and communicates with others by passing messages. It simplifies concurrent programs but still has performance issues, if the threads need to operate on the same large piece of data. There are doubtless other possible solutions that I haven't mentioned, and I would love to know to what extent you, as a developer, are considering the problem of multi-core concurrency, what solution you currently favor, and why. Cheers, Tony.

Read the article

Cannot establish maximum resolution on ASUS PB278Q

- by dentuzhik

I've recently bought brand new ASUS PB278Q monitor. When trying to connect to my laptop, everything works great, except that I can't get the native resolution of my monitor (2560x1440) working. The automatic is 1920x1080. My graphic card is Nvidia GeForce 320m. Here's output from lspci for it: ~$ lspci | grep VGA 02:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2) and also xrandr: ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected primary 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 I have proprietary drivers installed on my machine, here's the info about the monitor from nvidia-settings (Actually I don't have enough reputation to post images, so here's the text): Chip Location: Internal Signal: TDMS Connection link: Single Native resolution: 2560x1440 Refresh rate: 60.00 Hz The monitor is connected to laptop via HDMI cable, and honestly I have no idea what version it is, and what version is my HDMI output of my graphics card. I tried to find how I can figure it out on the web, but had no luck. Also my video card has only VGA and HDMI outs so I can't test neither DVI-D cable nor DisplayPort. So apparently, there's some problem over there. At least I want to know exactly what's going on. I've tried to see if it a linux-specific problem, but windows also gave me the same resolution by default. What I've already tried: Connect through VGA (stupid one, of course it gave me 1920x1080). Checked two HDMI cables (not sure if they're the same or not, as mentioned above). Played around with xrandr and adding custom modes. Didn't help. Surfed for the info a lot on the web, but couldn't get appropriate results. Actually xrandr gives me the following: ~$ cvt 2560 1440 60 # 2560x1440 59.96 Hz (CVT 3.69M9) hsync: 89.52 kHz; pclk: 312.25 MHz Modeline "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr --newmode "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected primary 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 2560x1440_60.00 (0x34f) 312.2MHz h: width 2560 start 2752 end 3024 total 3488 skew 0 clock 89.5KHz v: height 1440 start 1443 end 1448 total 1493 clock 60.0Hz ~$ xrandr --addmode HDMI-0 2560x1440_60.00 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30 What I intend to do next: Try another HDMI cable? Try HDMI to DVI-D cable? Try HDMI to DisplayPort cable? Another type of adapters? VGA to DVI-D? Buy another laptop with another graphic card. Damn. My ideas pretty much end here. Any ideas? Any explanations why it isn't working are appreciated.

Read the article

update jframe in java or revalidate/repaint/ panel

- by user1516251

How to update a java frame with changed content I want to update a frame or just the panel with updated content. What do I use for this Here is where i want to revalidate the frame or repaint mainpanel or whatever will work I have tried a number of things, but none of them have worked. public void actionPerformed(ActionEvent e) { //System.out.println(e.getActionCommand()); if (e.getActionCommand().equals("advance")) { multi--; // Revalidate update repaint here <<<<<<<<<<<<<<<<<<< } else if (e.getActionCommand().equals("reverse")) { multi++; // Revalidate update repaint here <<<<<<<<<<<<<<<<<<< } else { openURL(e.getActionCommand()); } } Here is the whole java file /* * * */ package build; import java.lang.reflect.Method; import javax.swing.JOptionPane; import java.util.Arrays; import java.util.*; import java.util.ArrayList; import javax.swing.*; import javax.swing.AbstractButton; import javax.swing.JScrollPane; import javax.swing.JButton; import javax.swing.JPanel; import javax.swing.JFrame; import javax.swing.ImageIcon; import java.awt.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; /* * ButtonDemo.java requires the following files: * images/right.gif * images/middle.gif * images/left.gif */ public class StockTable extends JPanel implements ActionListener { static int multi = 1; int roll = 0; static TextVars textvars = new TextVars(); static final String[] browsers = { "firefox", "opera", "konqueror", "epiphany", "seamonkey", "galeon", "kazehakase", "mozilla", "netscape" }; JFrame frame; JPanel mainpanel, panel1, panel2, panel3, panel4, panel2left, panel2center, panel2right; JButton stknames_btn[] = new JButton[textvars.getNumberOfStocks()]; JLabel label[] = new JLabel[textvars.getNumberOfStocks()]; JLabel headlabel, dayspan, namelabel; JRadioButton radioButton; JButton button; JScrollPane scrollpane; int wid = 825; public JPanel createContentPane() { mainpanel = new JPanel(); mainpanel.setPreferredSize(new Dimension(wid, 800)); mainpanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); panel1 = new JPanel(); panel1.setPreferredSize(new Dimension(wid, 25)); c.gridx = 0; c.gridy = 0; c.insets = new Insets(0,0,0,0); mainpanel.add(panel1, c); // Panel 2------------ panel2 = new JPanel(); panel2.setPreferredSize(new Dimension(wid, 51)); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0,0,0,0); mainpanel.add(panel2, c); panel2left = new JPanel(); panel2left.setPreferredSize(new Dimension(270, 51)); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2left, c); panel2center = new JPanel(); panel2center.setPreferredSize(new Dimension(258, 51)); c.gridx = 1; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2center, c); panel2right = new JPanel(); panel2right.setPreferredSize(new Dimension(270, 51)); c.gridx = 2; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2right, c); // ------------------ panel3 = new JPanel(); panel3.setLayout(new GridBagLayout()); scrollpane = new JScrollPane(panel3); scrollpane.setPreferredSize(new Dimension(wid, 675)); c.gridx = 0; c.gridy = 2; c.insets = new Insets(0,0,0,0); mainpanel.add(scrollpane, c); ImageIcon leftButtonIcon = createImageIcon("images/right.gif"); //b1 = new JButton("Disable middle button", leftButtonIcon); //b1.setVerticalTextPosition(AbstractButton.CENTER); //b1.setHorizontalTextPosition(AbstractButton.LEADING); //aka LEFT, for left-to-right locales //b1.setMnemonic(KeyEvent.VK_D); //b1.setActionCommand("disable"); //Listen for actions on buttons 1 //b1.addActionListener(this); //b1.setToolTipText("Click this button to disable the middle button."); //Add Components to this container, using the default FlowLayout. //add(b1); headlabel = new JLabel("hellorow1"); c.gridx = 0; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(headlabel, c); radioButton = new JRadioButton("Percentage"); c.gridx = 2; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(radioButton, c); radioButton = new JRadioButton("Days Range"); c.gridx = 3; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(radioButton, c); radioButton = new JRadioButton("Open / Close"); c.gridx = 4; c.gridy = 0; c.insets = new Insets(0, 0, 0,0 ); panel1.add(radioButton, c); button = new JButton("<<"); button.setPreferredSize(new Dimension(50, 50)); button.setActionCommand("reverse"); button.addActionListener(this); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2left.add(button, c); dayspan = new JLabel("hellorow2"); dayspan.setHorizontalAlignment(JLabel.CENTER); dayspan.setVerticalAlignment(JLabel.CENTER); dayspan.setPreferredSize(new Dimension(270, 50)); c.gridx = 1; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2center.add(dayspan, c); button = new JButton(">>"); button.setPreferredSize(new Dimension(50, 50)); button.setActionCommand("advance"); button.addActionListener(this); if (multi == 0) { button.setEnabled(false); } else { button.setEnabled(true); } c.gridx = 2; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2right.add(button, c); int availSpace_int = textvars.getStocks().size()-textvars.getNumberOfStocks()*7; ArrayList<String[]> stocknames = textvars.getStockNames(); ArrayList<String[]> stocks = textvars.getStocks(); for (int column = 0; column < 8; column++) { for (int row = 0; row < textvars.getNumberOfStocks(); row++) { if (column==0) { if (row==0) { namelabel = new JLabel(stocknames.get(0)[0]); namelabel.setVerticalAlignment(JLabel.CENTER); namelabel.setHorizontalAlignment(JLabel.CENTER); namelabel.setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0, 0, 0, 0); panel3.add(namelabel, c); } else { stknames_btn[row] = new JButton(stocknames.get(row)[0], leftButtonIcon); stknames_btn[row].setVerticalTextPosition(AbstractButton.CENTER); stknames_btn[row].setActionCommand(stocknames.get(row)[1]); stknames_btn[row].addActionListener(this); stknames_btn[row].setToolTipText("go to Google Finance "+stocknames.get(row)[0]); stknames_btn[row].setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0, 0, 0, 0); //scrollpane.add(stknames[row], c); panel3.add(stknames_btn[row], c); } } else { label[row]= new JLabel(textvars.getStocks().get(columnMulti(multi))[1]); label[row].setBorder(BorderFactory.createLineBorder(Color.black)); label[row].setVerticalAlignment(JLabel.CENTER); label[row].setHorizontalAlignment(JLabel.CENTER); label[row].setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0,0,0,0); panel3.add(label[row], c); } } } return mainpanel; } public void actionPerformed(ActionEvent e) { //System.out.println(e.getActionCommand()); if (e.getActionCommand().equals("advance")) { multi--; } else if (e.getActionCommand().equals("reverse")) { multi++; } else { openURL(e.getActionCommand()); } } /** Returns an ImageIcon, or null if the path was invalid. */ protected static ImageIcon createImageIcon(String path) { java.net.URL imgURL = StockTable.class.getResource(path); if (imgURL != null) { return new ImageIcon(imgURL); } else { System.err.println("Couldn't find file: " + path); return null; } } public static void openURL(String url) { String osName = System.getProperty("os.name"); try { if (osName.startsWith("Mac OS")) { Class<?> fileMgr = Class.forName("com.apple.eio.FileManager"); Method openURL = fileMgr.getDeclaredMethod("openURL", new Class[] {String.class}); openURL.invoke(null, new Object[] {url}); } else if (osName.startsWith("Windows")) { Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url); } else { //assume Unix or Linux boolean found = false; for (String browser : browsers) if (!found) { found = Runtime.getRuntime().exec( new String[] {"which", browser}).waitFor() == 0; if (found) Runtime.getRuntime().exec(new String[] {browser, url}); } if (!found) throw new Exception(Arrays.toString(browsers)); } } catch (Exception e) { JOptionPane.showMessageDialog(null, "Error attempting to launch web browser\n" + e.toString()); } } int reit = 0; int start = textvars.getStocks().size()-((textvars.getNumberOfStocks()*5)*7)-1; public int columnMulti(int multi) { reit++; start++; if (reit == textvars.getNumberOfStocks()) { reit = 0; start=start+64; } //start = start - (multi*(textvars.getNumberOfStocks())); return start; } /** * Create the GUI and show it. For thread safety, * this method should be invoked from the * event-dispatching thread. */ private static void createAndShowGUI() { //Create and set up the window. JFrame frame = new JFrame("Stock Table"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //Create and set up the content pane. StockTable newContentPane = new StockTable(); //newContentPane.setOpaque(true); //content panes must be opaque //frame.setContentPane(newContentPane); frame.setContentPane(newContentPane.createContentPane()); frame.setSize(800, 800); //Display the window. frame.pack(); frame.setVisible(true); } public static void main(String[] args) { //Schedule a job for the event-dispatching thread: //creating and showing this application's GUI. javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { createAndShowGUI(); } }); } }

Read the article

How to make Stack.Pop threadsafe

- by user260197

I am using the BlockingQueue code posted in this question, but realized I needed to use a Stack instead of a Queue given how my program runs. I converted it to use a Stack and renamed the class as needed. For performance I removed locking in Push, since my producer code is single threaded. My problem is how can thread working on the (now) thread safe Stack know when it is empty. Even if I add another thread safe wrapper around Count that locks on the underlying collection like Push and Pop do, I still run into the race condition that access Count and then Pop are not atomic. Possible solutions as I see them (which is preferred and am I missing any that would work better?): Consumer threads catch the InvalidOperationException thrown by Pop(). Pop() return a nullptr when _stack-Count == 0, however C++-CLI does not have the default() operator ala C#. Pop() returns a boolean and uses an output parameter to return the popped element. Here is the code I am using right now: generic <typename T> public ref class ThreadSafeStack { public: ThreadSafeStack() { _stack = gcnew Collections::Generic::Stack<T>(); } public: void Push(T element) { _stack->Push(element); } T Pop(void) { System::Threading::Monitor::Enter(_stack); try { return _stack->Pop(); } finally { System::Threading::Monitor::Exit(_stack); } } public: property int Count { int get(void) { System::Threading::Monitor::Enter(_stack); try { return _stack->Count; } finally { System::Threading::Monitor::Exit(_stack); } } } private: Collections::Generic::Stack<T> ^_stack; };

Read the article

Custom WPF TreeView

- by Robert

I have a custom class that I would like to bind a WPF TreeView that has three tiers. Each tier needs to be bound like this: Monitor --> LCD --> Samsung 1445 LCD --> CRT --> Sony 125 CRT Here is the example code: public partial class MainWindow : Window { public MainWindow() { InitializeComponent(); SystemInventory sysInventory = new SystemInventory(); //Possibly do something like this. _myTreeView.DataContext = sysInventory.DeviceGroupInstances; } public class SystemInventory { public ObservableCollection<DeviceGroup> DeviceGroupInstances { get; set; } public SystemInventory() { DeviceGroupInstances = new ObservableCollection<DeviceGroup>(); DeviceGroupInstances.Add(new DeviceGroup("Monitor")); } } public class DeviceGroup { public string DeviceGroupName { get; set; } public ObservableCollection<DeviceType> DeviceTypeInstances { get; set; } public DeviceGroup(string deviceGroupName) { DeviceTypeInstances = new ObservableCollection<DeviceType>(); DeviceGroupName = deviceGroupName; if (deviceGroupName == "Monitor") { DeviceTypeInstances.Add(new DeviceType("LCD")); DeviceTypeInstances.Add(new DeviceType("CRT")); } } } public class DeviceType { public string DeviceTypeName { get; set; } public ObservableCollection<DeviceInstance> DeviceInstances { get; set; } public DeviceType(string deviceGroupName) { DeviceInstances = new ObservableCollection<DeviceInstance>(); DeviceTypeName = deviceGroupName; if (deviceGroupName == "Monitor") { DeviceInstances.Add(new DeviceInstance("Samsung 1445 LCD")); } else { DeviceInstances.Add(new DeviceInstance("Sony 125 CRT")); } } } public class DeviceInstance { public string DeviceInstanceName { get; set; } public DeviceInstance(string instanceName) { DeviceInstanceName = instanceName; } } }

Read the article

A more elegant way to start a multithread alarm in Rebol VID ? (What's the equivalent of load event?

- by Rebol Tutorial

I want to trigger an alarm when the GUI starts. I can't see what's the equivalent of load event of other language in Rebol VID, so I put it in the periodic handler which is quite circumvoluted. So how to do this more cleanly ? alarm-data: none set-alarm: func [ "Set alarm for future time." seconds "Seconds from now to ring alarm." message [string! unset!] "Message to print on alarm." ] [ alarm-data: reduce [now/time + seconds message] ] ring: func [ "Action for when alarm comes due." message [string! unset!] ] [ set-face monitor either message [message]["RIIIING!"] ; Your sound playing can also go here (my computer doesn't have speakers). ] periodic: func [ "Called every second, checks alarms." fact action event ] [ either alarm-data [ ; Update alarm countdown. set-face monitor rejoin [ "Alarm will ring in " to integer! alarm-data/1 - now/time " seconds." ] ; Check alarm. if now/time > alarm-data/1 [ ring alarm-data/2 ;alarm-data: none ; Reset once fired. ] ][ either value? 'message [ set-alarm seconds message ][ set-alarm seconds "Alarm triggered!" ] ] ] alarm: func[seconds message [string! unset!]][ system/words/seconds: seconds if value? 'message [ system/words/message: message ] view layout [ monitor: text 256 "" rate 1 feel [engage: :periodic] button 256 "re/start countdown" [ either value? 'message [ set-alarm seconds message ][ set-alarm seconds "Alarm triggered!" ] set-face monitor "Alarm set." ] ] ]

Read the article

ob_start() is partially capturing data

- by AAA

I am using the following code: PHP: // Generate Guid function NewGuid() { $s = strtoupper(uniqid(rand(),true)); $guidText = substr($s,0,8) . '-' . substr($s,8,4) . '-' . substr($s,12,4). '-' . substr($s,16,4). '-' . substr($s,20); return $guidText; } // End Generate Guid $Guid = NewGuid(); $alphabet = '123456789abcdefghijkmnopqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ'; function base_encode($num, $alphabet) { $base_count = strlen($alphabet); $encoded = ''; while ($num >= $base_count) { $div = $num/$base_count; $mod = ($num-($base_count*intval($div))); $encoded = $alphabet[$mod] . $encoded; $num = intval($div); } if ($num) $encoded = $alphabet[$num] . $encoded; return $encoded; } function base_decode($num, $alphabet) { $decoded = 0; $multi = 1; while (strlen($num) > 0) { $digit = $num[strlen($num)-1]; $decoded += $multi * strpos($alphabet, $digit); $multi = $multi * strlen($alphabet); $num = substr($num, 0, -1); } return $decoded; } ob_start(); echo base_encode($Guid, $alphabet); //should output: bUKpk $theid = ob_get_contents(); ob_get_clean(); The problem: When i echo $theid, it shows the complete entry, but as it is being inserted into the database, only the first entry in the sequence gets inserted, for example for the entry buKPK, only 'b' is being inserted not the rest.

Read the article

Windows Build System: How to build a project (from its source code) which doesn't have *.sln or Visu

- by claws

I'm facing this problem. So, I need to build the support libraries (zlib, libtiff, libpng, libxml2, libiconv) with "Multithreaded DLL" (/MD) & "Multithreaded DLL Debug" (/MDd) run-time options. But the problem is there is no direct way . I mean there is no *.sln / *.vcproj file which I can open in Visual C++ and build it. I'm aware with the GNU build system: $./configure --with-all-sorts-of-required-switches $./make $./make install During my search I've encountered with something called CMake which generates *.vcproj & *.sln file but for that CMakeLists.txt is required. Not all projects provide CMakeLists.txt. I've never compiled anything from Visual C++ Command Line. Generally most projects provide makefile. Now how do I generate *.vcproj / *.sln from this? Can I compile with mingw-make of MinGW? If I can, how do I set different options ("Multi-Threaded"(/MT), "Multi-Threaded Debug"(/MTd), "Multi-Threaded DLL"(/MD), "Multi-Threaded DLL Debug"(/MDd)) for run-time libraries? I don't know what other ways are available. Please throw some light on this.

Read the article

Parsing a JSON feed from YQL using jQuery

- by Keith

I am using YQL's query.multi to grab multiple feeds so I can parse a single JSON feed with jQuery and reduce the number of connections I'm making. In order to parse a single feed, I need to be able to check the type of result (photo, item, entry, etc) so I can pull out items in specific ways. Because of the way the items are nested within the JSON feed, I'm not sure the best way to loop through the results and check the type and then loop through the items to display them. Here is a YQL (http://developer.yahoo.com/yql/console/) query.multi example and you can see three different result types (entry, photo, and item) and then the items nested within them: select * from query.multi where queries= "select * from twitter.user.timeline where id='twitter'; select * from flickr.photos.search where has_geo='true' and text='san francisco'; select * from delicious.feeds.popular" or here is the JSON feed itself: http://query.yahooapis.com/v1/public/yql?q=select%20*%20from%20query.multi%20where%20queries%3D%22select%20*%20from%20flickr.photos.search%20where%20user_id%3D'23433895%40N00'%3Bselect%20*%20from%20delicious.feeds%20where%20username%3D'keith.muth'%3Bselect%20*%20from%20twitter.user.timeline%20where%20id%3D'keithmuth'%22&format=json&env=store%3A%2F%2Fdatatables.org%2Falltableswithkeys&callback=

Read the article

PHP OOP: Avoid Singleton/Static Methods in Domain Model Pattern

- by sunwukung

I understand the importance of Dependency Injection and its role in Unit testing, which is why the following issue is giving me pause: One area where I struggle not to use the Singleton is the Identity Map/Unit of Work pattern (Which keeps tabs on Domain Object state). //Not actual code, but it should demonstrate the point class Monitor{//singleton construction omitted for brevity static $members = array();//keeps record of all objects static $dirty = array();//keeps record of all modified objects static $clean = array();//keeps record of all clean objects } class Mapper{//queries database, maps values to object fields public function find($id){ if(isset(Monitor::members[$id]){ return Monitor::members[$id]; } $values = $this->selectStmt($id); //field mapping process omitted for brevity $Object = new Object($values); Monitor::new[$id]=$Object return $Object; } $User = $UserMapper->find(1);//domain object is registered in Id Map $User->changePropertyX();//object is marked "dirty" in UoW // at this point, I can save by passing the Domain Object back to the Mapper $UserMapper->save($User);//object is marked clean in UoW //but a nicer API would be something like this $User->save(); //but if I want to do this - it has to make a call to the mapper/db somehow $User->getBlogPosts(); //or else have to generate specific collection/object graphing methods in the mapper $UserPosts = $UserMapper->getBlogPosts(); $User->setPosts($UserPosts); Any advice on how you might handle this situation? I would be loathe to pass/generate instances of the mapper/database access into the Domain Object itself to satisfy DI - At the same time, avoiding that results in lots of calls within the Domain Object to external static methods. Although I guess if I want "save" to be part of its behaviour then a facility to do so is required in its construction. Perhaps it's a problem with responsibility, the Domain Object shouldn't be burdened with saving. It's just quite a neat feature from the Active Record pattern - it would be nice to implement it in some way.

Read the article

C#, Can I check on a lock without trying to acquire it?

- by Biff MaGriff

Hello, I have a lock in my c# web app that prevents users from running the update script once it has started. I was thinking I would put a notification in my master page to let the user know that the data isn't all there yet. Currently I do my locking like so. protected void butRefreshData_Click(object sender, EventArgs e) { Thread t = new Thread(new ParameterizedThreadStart(UpdateDatabase)); t.Start(this); //sleep for a bit to ensure that javascript has a chance to get rendered Thread.Sleep(100); } public static void UpdateDatabase(object con) { if (Monitor.TryEnter(myLock)) { Updater.RepopulateDatabase(); Monitor.Exit(myLock); } else { Common.RegisterStartupScript(con, AlreadyLockedJavaScript); } } And I do not want to do if(Monitor.TryEnter(myLock)) Monitor.Exit(myLock); else //show processing labal As I imagine there is a slight possibility that it might display the notification when it isn't actually running. Is there an alternative I can use? Edit: Hi Everyone, thanks a lot for your suggestions! Unfortunately I couldn't quite get them to work... However I combined the ideas on 2 answers and came up with my own solution.

Read the article

Ensuring that all callbacks were completed before sending a new request through a DuplexChannel usin

- by Etan

I am experiencing some issues when using a Callback in a WCF project. First, the server invokes some function Foo on the client which then forwards the request to a Windows Forms GUI: GUI CLASS delegate void DoForward(); public void ForwardToGui() { if (this.cmdSomeButton.InvokeRequired) { DoForward d = new DoForward(ForwardToGui); this.Invoke(d); } else { Process(); // sets result variable in callback class as soon as done } } } CALLBACK CLASS object _m = new object(); private int _result; public int result { get { return _result; } set { _result = value; lock(_m) { Monitor.PulseAll(_m); } } } [OperationContract] public int Foo() { result = 0; Program.Gui.ForwardToGui(); lock(_m) { Monitor.Wait(_m, 30000); } return result; } The problem now is that the user should be able to cancel the process, which doesn't work properly: SERVER INTERFACE [OperationContract] void Cleanup(); GUI CLASS private void Gui_FormClosed(object sender, EventArgs e) { Program.callbackclass.nextAction = -1; // so that the monitor pulses and Foo() returns Program.server.Cleanup(); } The problem with this is that Cleanup() hangs. However, when I close the form when Process() is not running, it works properly. The source seems to be that the Cleanup() is called before the monitor pulses etc and therefore a new request is sent to the server before the last request from the server has not yet been responded. How can I solve this problem? How can I ensure before calling Cleanup() that no Foo() is currently being executed?

Read the article

txt file read/overwrite/append. Is this feasible? (Visual C#)

- by Arcadian

Hi, I'm writing a program for some data entry I have to periodically do. I have begun testing a few things that the program will have to do but i'm not sure about this part. What i need this part to do is: read a .txt file of data take the first 12 characters from each line take the first 12 characters from each line of the data that has been entered in a multi-line text box compare the two lists line by line if one of the 12 character blocks from the multi-line text box match one of the blocks in the .txt file then overwrite that entire line (only 17 characters in total) if one of the 12 character blocks from the multi-line text box DO NOT match any of the blocks in the.txt file then append that entire line to the file thats all it has to do. i'll do an example: TXT FILE: G01:78:08:32 JG05 G08:80:93:10 JG02 G28:58:29:28 JG04 MULTI-LINE TEXT BOX: G01:78:08:32 JG06 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 RESULTING TXT FILE: G01:78:08:32 JG06 G08:80:93:10 JG02 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 as you can see lines 1 and 3 were overwriten, line 2 was left alone as it did not match any blocks in the text box, lines 4 and 5 were appended to the file. thats all i want it to do. How do i go about this? Thanks in advance

Read the article

C# 4: The Curious ConcurrentDictionary

- by James Michael Hare

In my previous post (here) I did a comparison of the new ConcurrentQueue versus the old standard of a System.Collections.Generic Queue with simple locking. The results were exactly what I would have hoped, that the ConcurrentQueue was faster with multi-threading for most all situations. In addition, concurrent collections have the added benefit that you can enumerate them even if they're being modified. So I set out to see what the improvements would be for the ConcurrentDictionary, would it have the same performance benefits as the ConcurrentQueue did? Well, after running some tests and multiple tweaks and tunes, I have good and bad news. But first, let's look at the tests. Obviously there's many things we can do with a dictionary. One of the most notable uses, of course, in a multi-threaded environment is for a small, local in-memory cache. So I set about to do a very simple simulation of a cache where I would create a test class that I'll just call an Accessor. This accessor will attempt to look up a key in the dictionary, and if the key exists, it stops (i.e. a cache "hit"). However, if the lookup fails, it will then try to add the key and value to the dictionary (i.e. a cache "miss"). So here's the Accessor that will run the tests: 1: internal class Accessor 2: { 3: public int Hits { get; set; } 4: public int Misses { get; set; } 5: public Func<int, string> GetDelegate { get; set; } 6: public Action<int, string> AddDelegate { get; set; } 7: public int Iterations { get; set; } 8: public int MaxRange { get; set; } 9: public int Seed { get; set; } 10: 11: public void Access() 12: { 13: var randomGenerator = new Random(Seed); 14: 15: for (int i=0; i<Iterations; i++) 16: { 17: // give a wide spread so will have some duplicates and some unique 18: var target = randomGenerator.Next(1, MaxRange); 19: 20: // attempt to grab the item from the cache 21: var result = GetDelegate(target); 22: 23: // if the item doesn't exist, add it 24: if(result == null) 25: { 26: AddDelegate(target, target.ToString()); 27: Misses++; 28: } 29: else 30: { 31: Hits++; 32: } 33: } 34: } 35: } Note that so I could test different implementations, I defined a GetDelegate and AddDelegate that will call the appropriate dictionary methods to add or retrieve items in the cache using various techniques. So let's examine the three techniques I decided to test: Dictionary with mutex - Just your standard generic Dictionary with a simple lock construct on an internal object. Dictionary with ReaderWriterLockSlim - Same Dictionary, but now using a lock designed to let multiple readers access simultaneously and then locked when a writer needs access. ConcurrentDictionary - The new ConcurrentDictionary from System.Collections.Concurrent that is supposed to be optimized to allow multiple threads to access safely. So the approach to each of these is also fairly straight-forward. Let's look at the GetDelegate and AddDelegate implementations for the Dictionary with mutex lock: 1: var addDelegate = (key,val) => 2: { 3: lock (_mutex) 4: { 5: _dictionary[key] = val; 6: } 7: }; 8: var getDelegate = (key) => 9: { 10: lock (_mutex) 11: { 12: string val; 13: return _dictionary.TryGetValue(key, out val) ? val : null; 14: } 15: }; Nothing new or fancy here, just your basic lock on a private object and then query/insert into the Dictionary. Now, for the Dictionary with ReadWriteLockSlim it's a little more complex: 1: var addDelegate = (key,val) => 2: { 3: _readerWriterLock.EnterWriteLock(); 4: _dictionary[key] = val; 5: _readerWriterLock.ExitWriteLock(); 6: }; 7: var getDelegate = (key) => 8: { 9: string val; 10: _readerWriterLock.EnterReadLock(); 11: if(!_dictionary.TryGetValue(key, out val)) 12: { 13: val = null; 14: } 15: _readerWriterLock.ExitReadLock(); 16: return val; 17: }; And finally, the ConcurrentDictionary, which since it does all it's own concurrency control, is remarkably elegant and simple: 1: var addDelegate = (key,val) => 2: { 3: _concurrentDictionary[key] = val; 4: }; 5: var getDelegate = (key) => 6: { 7: string s; 8: return _concurrentDictionary.TryGetValue(key, out s) ? s : null; 9: }; Then, I set up a test harness that would simply ask the user for the number of concurrent Accessors to attempt to Access the cache (as specified in Accessor.Access() above) and then let them fly and see how long it took them all to complete. Each of these tests was run with 10,000,000 cache accesses divided among the available Accessor instances. All times are in milliseconds. 1: Dictionary with Mutex Locking 2: --------------------------------------------------- 3: Accessors Mostly Misses Mostly Hits 4: 1 7916 3285 5: 10 8293 3481 6: 100 8799 3532 7: 1000 8815 3584 8: 9: 10: Dictionary with ReaderWriterLockSlim Locking 11: --------------------------------------------------- 12: Accessors Mostly Misses Mostly Hits 13: 1 8445 3624 14: 10 11002 4119 15: 100 11076 3992 16: 1000 14794 4861 17: 18: 19: Concurrent Dictionary 20: --------------------------------------------------- 21: Accessors Mostly Misses Mostly Hits 22: 1 17443 3726 23: 10 14181 1897 24: 100 15141 1994 25: 1000 17209 2128 The first test I did across the board is the Mostly Misses category. The mostly misses (more adds because data requested was not in the dictionary) shows an interesting trend. In both cases the Dictionary with the simple mutex lock is much faster, and the ConcurrentDictionary is the slowest solution. But this got me thinking, and a little research seemed to confirm it, maybe the ConcurrentDictionary is more optimized to concurrent "gets" than "adds". So since the ratio of misses to hits were 2 to 1, I decided to reverse that and see the results. So I tweaked the data so that the number of keys were much smaller than the number of iterations to give me about a 2 to 1 ration of hits to misses (twice as likely to already find the item in the cache than to need to add it). And yes, indeed here we see that the ConcurrentDictionary is indeed faster than the standard Dictionary here. I have a strong feeling that as the ration of hits-to-misses gets higher and higher these number gets even better as well. This makes sense since the ConcurrentDictionary is read-optimized. Also note that I tried the tests with capacity and concurrency hints on the ConcurrentDictionary but saw very little improvement, I think this is largely because on the 10,000,000 hit test it quickly ramped up to the correct capacity and concurrency and thus the impact was limited to the first few milliseconds of the run. So what does this tell us? Well, as in all things, ConcurrentDictionary is not a panacea. It won't solve all your woes and it shouldn't be the only Dictionary you ever use. So when should we use each? Use System.Collections.Generic.Dictionary when: You need a single-threaded Dictionary (no locking needed). You need a multi-threaded Dictionary that is loaded only once at creation and never modified (no locking needed). You need a multi-threaded Dictionary to store items where writes are far more prevalent than reads (locking needed). And use System.Collections.Concurrent.ConcurrentDictionary when: You need a multi-threaded Dictionary where the writes are far more prevalent than reads. You need to be able to iterate over the collection without locking it even if its being modified. Both Dictionaries have their strong suits, I have a feeling this is just one where you need to know from design what you hope to use it for and make your decision based on that criteria.

Read the article

Monitoring Html Element CSS Changes in JavaScript

- by Rick Strahl

[ updated Feb 15, 2011: Added event unbinding to avoid unintended recursion ] Here's a scenario I've run into on a few occasions: I need to be able to monitor certain CSS properties on an HTML element and know when that CSS element changes. For example, I have a some HTML element behavior plugins like a drop shadow that attaches to any HTML element, but I then need to be able to automatically keep the shadow in sync with the window if the element dragged around the window or moved via code. Unfortunately there's no move event for HTML elements so you can't tell when it's location changes. So I've been looking around for some way to keep track of the element and a specific CSS property, but no luck. I suspect there's nothing native to do this so the only way I could think of is to use a timer and poll rather frequently for the property. I ended up with a generic jQuery plugin that looks like this: (function($){ $.fn.watch = function (props, func, interval, id) { /// <summary> /// Allows you to monitor changes in a specific /// CSS property of an element by polling the value. /// when the value changes a function is called. /// The function called is called in the context /// of the selected element (ie. this) /// </summary> /// <param name="prop" type="String">CSS Properties to watch sep. by commas</param> /// <param name="func" type="Function"> /// Function called when the value has changed. /// </param> /// <param name="interval" type="Number"> /// Optional interval for browsers that don't support DOMAttrModified or propertychange events. /// Determines the interval used for setInterval calls. /// </param> /// <param name="id" type="String">A unique ID that identifies this watch instance on this element</param> /// <returns type="jQuery" /> if (!interval) interval = 200; if (!id) id = "_watcher"; return this.each(function () { var _t = this; var el$ = $(this); var fnc = function () { __watcher.call(_t, id) }; var itId = null; var data = { id: id, props: props.split(","), func: func, vals: [props.split(",").length], fnc: fnc, origProps: props, interval: interval }; $.each(data.props, function (i) { data.vals[i] = el$.css(data.props[i]); }); el$.data(id, data); hookChange(el$, id, data.fnc); }); function hookChange(el$, id, fnc) { el$.each(function () { var el = $(this); if (typeof (el.get(0).onpropertychange) == "object") el.bind("propertychange." + id, fnc); else if ($.browser.mozilla) el.bind("DOMAttrModified." + id, fnc); else itId = setInterval(fnc, interval); }); } function __watcher(id) { var el$ = $(this); var w = el$.data(id); if (!w) return; var _t = this; if (!w.func) return; // must unbind or else unwanted recursion may occur el$.unwatch(id); var changed = false; var i = 0; for (i; i < w.props.length; i++) { var newVal = el$.css(w.props[i]); if (w.vals[i] != newVal) { w.vals[i] = newVal; changed = true; break; } } if (changed) w.func.call(_t, w, i); // rebind event hookChange(el$, id, w.fnc); } } $.fn.unwatch = function (id) { this.each(function () { var el = $(this); var fnc = el.data(id).fnc; try { if (typeof (this.onpropertychange) == "object") el.unbind("propertychange." + id, fnc); else if ($.browser.mozilla) el.unbind("DOMAttrModified." + id, fnc); else clearInterval(id); } // ignore if element was already unbound catch (e) { } }); return this; } })(jQuery); With this I can now monitor movement by monitoring say the top CSS property of the element. The following code creates a box and uses the draggable (jquery.ui) plugin and a couple of custom plugins that center and create a shadow. Here's how I can set this up with the watcher: $("#box") .draggable() .centerInClient() .shadow() .watch("top", function() { $(this).shadow(); },70,"_shadow"); ... $("#box") .unwatch("_shadow") .shadow("remove"); This code basically sets up the window to be draggable and initially centered and then a shadow is added. The .watch() call then assigns a CSS property to monitor (top in this case) and a function to call in response. The component now sets up a setInterval call and keeps on pinging this property every time. When the top value changes the supplied function is called. While this works and I can now drag my window around with the shadow following suit it's not perfect by a long shot. The shadow move is delayed and so drags behind the window, but using a higher timer value is not appropriate either as the UI starts getting jumpy if the timer's set with too small of an increment. This sort of monitor can be useful for other things as well where operations are maybe not quite as time critical as a UI operation taking place. Can anybody see a better a better way of capturing movement of an element on the page?© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET JavaScript jQuery

Read the article

NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

- by Mike

I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

Read the article

No GLX on Intel card with multiseat with additional nVidia card

- by MeanEYE

I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

Read the article

Announcing: Improvements to the Windows Azure Portal

- by ScottGu

Earlier today we released a number of enhancements to the new Windows Azure Management Portal. These new capabilities include: Service Bus Management and Monitoring Support for Managing Co-administrators Import/Export support for SQL Databases Virtual Machine Experience Enhancements Improved Cloud Service Status Notifications Media Services Monitoring Support Storage Container Creation and Access Control Support All of these improvements are now live in production and available to start using immediately. Below are more details on them: Service Bus Management and Monitoring The new Windows Azure Management Portal now supports Service Bus management and monitoring. Service Bus provides rich messaging infrastructure that can sit between applications (or between cloud and on-premise environments) and allow them to communicate in a loosely coupled way for improved scale and resiliency. With the new Service Bus experience, you can now create and manage Service Bus Namespaces, Queues, Topics, Relays and Subscriptions. You can also get rich monitoring for Service Bus Queues, Topics and Subscriptions. To create a Service Bus namespace, you can now select the “Service Bus” tab in the Windows Azure portal and then simply select the CREATE command: Doing so will bring up a new “Create a Namespace” dialog that allows you to name and create a new Service Bus Namespace: Once created, you can obtain security credentials associated with the Namespace via the ACCESS KEY command. This gives you the ability to obtain the connection string associated with the service namespace. You can copy and paste these values into any application that requires these credentials: It is also now easy to create Service Bus Queues and Topics via the NEW experience in the portal drawer. Simply click the NEW command and navigate to the “App Services” category to create a new Service Bus entity: Once you provision a new Queue or Topic it can be managed in the portal. Clicking on a namespace will display all queues and topics within it: Clicking on an item in the list will allow you to drill down into a dashboard view that allows you to monitor the activity and traffic within it, as well as perform operations on it. For example, below is a view of an “orders” queue – note how we now surface both the incoming and outgoing message flow rate, as well as the total queue length and queue size: To monitor pub/sub subscriptions you can use the ADD METRICS command within a topic and select a specific subscription to monitor. Support for Managing Co-Administrators You can now add co-administrators for your Windows Azure subscription using the new Windows Azure Portal. This allows you to share management of your Windows Azure services with other users. Subscription co-administrators share the same administrative rights and permissions that service administrator have - except a co-administrator cannot change or view billing details about the account, nor remove the service administrator from a subscription. In the SETTINGS section, click on the ADMINISTRATORS tab, and select the ADD button to add a co-administrator to your subscription: To add a co-administrator, you specify the email address for a Microsoft account (formerly Windows Live ID) or an organizational account, and choose the subscription you want to add them to: You can later update the subscriptions that the co-administrator has access to by clicking on the EDIT button, and then select or deselect the subscriptions to which they belong. Import/Export Support for SQL Databases The Windows Azure administration portal now supports importing and exporting SQL Databases to/from Blob Storage. Databases can be imported/exported to blob storage using the same BACPAC file format that is supported with SQL Server 2012. Among other benefits, this makes it easy to copy and migrate databases between on-premise and cloud environments. SQL Databases now have an EXPORT command in the bottom drawer that when pressed will prompt you to save your database to a Windows Azure storage container: The UI allows you to choose an existing storage account or create a new one, as well as the name of the BACPAC file to persist in blob storage: You can also now import and create a new SQL Database by using the NEW command. This will prompt you to select the storage container and file to import the database from: The Windows Azure Portal enables you to monitor the progress of import and export operations. If you choose to log out of the portal, you can come back later and check on the status of all of the operations in the new history tab of the SQL Database server – this shows your entire import and export history and the status (success/fail) of each: Enhancements to the Virtual Machine Experience One of the common pain-points we have heard from customers using the preview of our new Virtual Machine support has been the inability to delete the associated VHDs when a VM instance (or VM drive) gets deleted. Prior to today’s release the VHDs would continue to be in your storage account and accumulate storage charges. You can now navigate to the Disks tab within the Virtual Machine extension, select a VM disk to delete, and click the DELETE DISK command: When you click the DELETE DISK button you have the option to delete the disk + associated .VHD file (completely clearing it from storage). Alternatively you can delete the disk but still retain a .VHD copy of it in storage. Improved Cloud Service Status Notifications The Windows Azure portal now exposes more information of the health status of role instances. If any of the instances are in a non-running state, the status at the top of the dashboard will summarize the status (and update automatically as the role health changes): Clicking the instance hyperlink within this status summary view will navigate you to a detailed role instance view, and allow you to get more detailed health status of each of the instances. The portal has been updated to provide more specific status information within this detailed view – giving you better visibility into the health of your app: Monitoring Support for Media Services Windows Azure Media Services allows you to create media processing jobs (for example: encoding media files) in your Windows Azure Media Services account. In the Windows Azure Portal, you can now monitor the number of encoding jobs that are queued up for processing as well as active, failed and queued tasks for encoding jobs. On your media services account dashboard, you can visualize the monitoring data for last 6 hours, 24 hours or 7 days. Storage Container Creation and Access Control Support You can now create Windows Azure Storage storage containers from within the Windows Azure Portal. After selecting a storage account, you can navigate to the CONTAINERS tab and click the ADD CONTAINER command: This will display a dialog that lets you name the new container and control access to it: You can also update the access setting as well as container metadata of existing containers by selecting one and then using the new EDIT CONTAINER command: This will then bring up the edit container dialog that allows you to change and save its settings: In addition to creating and editing containers, you can click on them within the portal to drill-in and view blobs within them. Summary The above features are all now live in production and available to use immediately. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today. Visit the Windows Azure Developer Center to learn more about how to build apps with it. We’ll have even more new features and enhancements coming later this month – including support for the recent Windows Server 2012 and .NET 4.5 releases (we will enable new web and worker role images with Windows Server 2012 and .NET 4.5, and support .NET 4.5 with Websites). Keep an eye out on my blog for details as these new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Search Results

Search found 10209 results on 409 pages for 'multi monitor'.

Page 135/409 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142 | Next Page >

- by ysap

- by Sam Abraham

- by maniat1k

- by ACShorten

- by l0b0

- by herom

- by Raster

- by Tony Davis

- by dentuzhik

- by user1516251

- by user260197

- by Robert

- by Rebol Tutorial

- by AAA

- by claws

- by Keith

- by sunwukung

- by Biff MaGriff

- by Etan

- by Arcadian

- by James Michael Hare

- by Rick Strahl

- by Mike

- by MeanEYE

- by ScottGu

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142 | Next Page >