Search Results

Search found 8314 results on 333 pages for 'ug events'.

Page 136/333 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• arp -n responds with (incomplete) on the wrong subnet, can't remove it

  - by Hannes

  context There are 2 servers: server1 - eth0 10.129.76.16 eth0.2 192.168.0.103 server2 - eth0 10.129.79.1 eth0.2 192.168.62.101 The 192.x.x.x addresses are connected to the same vlan (vlan2) and are able to see eachother. The 10.x.x.x addresses are connected to different vlan's which are not able to see eachother. on request of David Swartz: the routing table on server 1 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.129.76.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 0.0.0.0 192.168.61.254 0.0.0.0 UG 100 0 0 eth0.2 the routing table on server 2 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 <public IP gw> 0.0.0.0 UG 100 0 0 eth0.11 10.129.79.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 <public IP> 0.0.0.0 255.255.255.128 U 0 0 0 eth0.11 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 Problem: When I ping from server 1 to server 2, it seems no packets are arriving and vice versa. When I check the routes (route -n) I see the default gw uses eth0.2 on both servers. But when I use arping, I get a response one way (from server 2 to server 1) but no response vice versa. arping 192.168.62.101 ARPING 192.168.62.101 from 10.129.76.16 eth0 ^CSent 2 probes (2 broadcast(s)) Received 0 response(s) As you can see it uses the 10.x.x.x address instead of the 192.x.x.x. And as I told before, the 10.x.x.x address is unreachable from the other server. When I force arping to use eth0.2, it does work. I don't have any problems with ping'ing other servers from any of those 2 servers. I did see this in the arp tables: ~# arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 and ~# arp -n | grep 192.168.62.101 Question quite obvious... How can I make these servers see each other again? Things I've tied clear the apropriate entries in the arptable and tried to get rid of the (incomplete) But I think the biggest problem is that eth0 is used instead of eth0.2 for the packets from server 1 to server 2 Because of David Swartz' remark about the routing tables, I added a route in there defining the host. I added 192.168.0.103 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 and 192.168.62.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 to the appropriate servers but this didn't solve the problem so I presume the problem is not in the routing. My guess I guess the problem lies in the following. ~$ arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 but I'm unable to remove this entry. (arp -d 192.168.0.103 has no effect) Thanks for reading and even more thanks for answering!

  Read the article

• iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

  - by Sam Martin

  I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

  Read the article

• How to connect FreeBSD Jail to network

  - by jgtumusiime

  So recently I successfully installed and configured a freebsd jail and I would like to install software within my jail but I cannot connect to the network. I'm trying to setup an apache+php+mysql installation within the jail and have the webserver accessible by users. Here is my rc.conf for the jail. ... jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# It does not show the IP address I configured within /etc/rc.conf. But, when I list the running jails, it shows the right IP address. Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 I also created a /etc/resolv.conf for nameservers. This was not in existence so I'm not quite sure if it is necessary? mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/src]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/src]# I have an updated copy of freebsd 7.1 source tree from SVN in /usr/src/ [root@mambo /usr/src]# svn info Path: . URL: http://svn.freebsd.org/base/release/7.1.0 Repository Root: http://svn.freebsd.org/base Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 243371 Node Kind: directory Schedule: normal Last Changed Author: kensmith Last Changed Rev: 186660 Last Changed Date: 2009-01-01 01:57:14 +0300 (Thu, 01 Jan 2009) [root@mambo /usr/src]# and I did #make buildworld while building the first jail i.e mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all in vail. Thank you

  Read the article

• Set source address to use tun device does not work (Debian Squeeze)

  - by A. Donda

  there have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected through the tunnel using OpenVPN's "two more specific routes" trick, but I disabled that. My routing table is like this: 198.144.156.141 192.168.2.1 255.255.255.255 UGH 0 0 0 eth0 10.30.92.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 10.30.92.1 10.30.92.5 255.255.255.255 UGH 0 0 0 tun1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.30.92.5 0.0.0.0 UG 0 0 0 tun1 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 And the interface configuration is like this: # ifconfig eth0 Link encap:Ethernet HWaddr XX-XX- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fe8d:acbd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:394869 errors:0 dropped:0 overruns:0 frame:0 TX packets:293489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:388519578 (370.5 MiB) TX bytes:148817487 (141.9 MiB) Interrupt:20 Base address:0x6f00 tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.30.92.6 P-t-P:10.30.92.5 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:9885 (9.6 KiB) TX bytes:4380 (4.2 KiB) plus the lo device. The routing table has two default routes, one via eth0 through my local network router (DSL modem) at 192.168.2.1, and another via tun1 through the VPN's gateway. With this configuration, if I connect to a site, the route chosen is the direct one (because it has less hops?): # traceroute 8.8.8.8 -n traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.2.1 0.427 ms 0.491 ms 0.610 ms 2 213.191.89.13 17.981 ms 20.137 ms 22.141 ms 3 62.109.108.48 23.681 ms 25.009 ms 26.401 ms ... This is fine, because my goal is to send only traffic from specific applications through the tunnel (esp. transmission, using its -i / bind-address-ipv4 option). To test whether this can work at all, I check it first with traceroute's -s option: # traceroute 8.8.8.8 -n -s 10.30.92.6 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 * * * 2 * * * 3 * * * ... This I take to mean that connection using the tunnel's local address as source is not possible. What is possible (though only as root) is to specify the source interface: # traceroute 8.8.8.8 -n -i tun1 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 10.30.92.1 129.337 ms 297.758 ms 297.725 ms 2 * * * 3 198.144.152.17 297.653 ms 297.652 ms 297.650 ms ... So apparently the tun1 interface is working and it is possible to send packets through it. But selecting the source interface is not implemented in my actual target application (transmission), so I would like to get source address selection to work. What am I doing wrong?

  Read the article

• How could i get selected value from dropdownlist in kendo ui grid in mvc

  - by Karthik Bammidi

  I am working on Kendo UI with asp.net mvc razor. I am trying to bind database table data with kendo grid that supports CRUD operations. Here i need to populate a dropdownlist for one of my table field. I have used the following code View: @model IEnumerable<MvcApplication1.PriceOption> @(Html.Kendo().Grid(Model) .Name("Grid") .Columns(columns => { //columns.Bound(p => p.ProductTitle).ClientTemplate("<input type='checkbox' disabled='disabled'name='Discontinued' <#= Discontinued? checked='checked' : '' #> />"); columns.Bound(p => p.ProductTitle).EditorTemplateName("OptionalEmail"); columns.Bound(p => p.OptionTitle); columns.Bound(p => p.Price); columns.Bound(p => p.Frequency); columns.Command(command => { command.Edit(); command.Destroy(); }).Width(200); }) .ToolBar(toolbar => toolbar.Create()) .Editable(editable => editable.Mode(Kendo.Mvc.UI.GridEditMode.InLine)) .Pageable() .Sortable() .Scrollable() .DataSource(dataSource => dataSource .Ajax() .Events(events => events.Error("error_handler")) .Model(model => model.Id(p => p.ProductID)) .Create(create => create.Action("CreateOption", "ZiceAdmin")) .Read(read => read.Action("Read", "ZiceAdmin")) .Update(update => update.Action("UpdateOption", "ZiceAdmin")) .Destroy(update => update.Action("DeleteOption", "ZiceAdmin")) ) ) OptionalEmail.cshtml @model string @(Html.Kendo().DropDownList() .Name("ProductTitle") .Value(Model) .SelectedIndex(0) .BindTo(new SelectList(ViewBag.ProductTitle)) ) Here i need to store the selected item from the dropdownlist. But it always shows null. How could i get the selected value from dropdownlist.

  Read the article

• Reactive Extensions vs FileSystemWatcher

  - by Joel Mueller

  One of the things that has long bugged me about the FileSystemWatcher is the way it fires multiple events for a single logical change to a file. I know why it happens, but I don't want to have to care - I just want to reparse the file once, not 4-6 times in a row. Ideally, there would be an event that only fires when a given file is done changing, rather than every step along the way. Over the years I've come up with various solutions to this problem, of varying degrees of ugliness. I thought Reactive Extensions would be the ultimate solution, but there's something I'm not doing right, and I'm hoping someone can point out my mistake. I have an extension method: public static IObservable<IEvent<FileSystemEventArgs>> GetChanged(this FileSystemWatcher that) { return Observable.FromEvent<FileSystemEventArgs>(that, "Changed"); } Ultimately, I would like to get one event per filename, within a given time period - so that four events in a row with a single filename are reduced to one event, but I don't lose anything if multiple files are modified at the same time. BufferWithTime sounds like the ideal solution. var bufferedChange = watcher.GetChanged() .Select(e => e.EventArgs.FullPath) .BufferWithTime(TimeSpan.FromSeconds(1)) .Where(e => e.Count > 0) .Select(e => e.Distinct()); When I subscribe to this observable, a single change to a monitored file triggers my subscription method four times in a row, which rather defeats the purpose. If I remove the Distinct() call, I see that each of the four calls contains two identical events - so there is some buffering going on. Increasing the TimeSpan passed to BufferWithTime seems to have no effect - I went as high as 20 seconds without any change in behavior. This is my first foray into Rx, so I'm probably missing something obvious. Am I doing it wrong? Is there a better approach? Thanks for any suggestions...

  Read the article

• jQuery plugin for Event Driven Architecture?

  - by leeand00

  Are there any Event Driven Architecture jQuery plugins? Step 1: Subscribing The subscribers subscribe to the event handler in the middle, and pass in a callback method, as well as the name of the event they are listening for... i.e. The two green subscribers will be listening for p0 events. And the blue subscriber will be listening for p1 events. Step 2: The p0 event is fired by another component to the Event Handler A p0 event is fired to the Event Handler The event handler notifies it's subscribers of the event, calling the callback methods they specified when they subscribed in Step 1: Subscribing. Note that the blue subscriber is not notified because it was not listening for p0 events. Step 3: The p1 event is fired a component to the Event Handler The p1 event is fired by another component Just as before except that now the blue subscriber receives the event through its callback and the other two green subscribers do not receive the event. Images by leeand00, on Flickr I can't seem to find one, but my guess is that they just call it something else in Javascript/jquery Also is there a name for this pattern? Because it isn't just a basic publisher/subscriber, it has to be called something else I would think.

  Read the article

• XtraGrid Suite - is there a way to add a button or hyperlink to a cell?

  - by calico-cat

  I'm working with the XtraGrid Suite made by DevExpress. I can't find any sort of functionality to do this, but I'm curious if you can add a button or hyperlink to a grid cell. Context: I've got an Events list. Each Event has a Time, Start/End, and a Category (Utility and Maintenance). There can be Start events and Stop events. Having done my analysis of the problem, I've decided that having a StartTime and EndTime for each event would not work. So if an event starts, I'd record the current time to the Event object, and set it as a 'Start' event. I'd like to add a "Stop" button/hyperlink to a cell in that row. If the user wishes to log an Ends event, the event type, etc would be copied to a new Event with the type 'Stop' and the button would disappear. I hope this makes sense. EDIT: Aaronaught's answer is actually better than what I was originally asking (a button) so I've updated the question. That way, anyone looking for putting a hyperlink in a cell can benefit from his example : )

  Read the article

• Html Select List: why would onchange be called twice?

  - by Mark Redman

  I have a page with a select list (ASP.NET MVC Page) The select list and onchange event specified like this: <%=Html.DropDownList("CompanyID", Model.CompanySelectList, "(select company)", new { @class = "data-entry-field", @onchange = "companySelectListChanged()" })%> The companySelectListChanged function is getting called twice? I am using the nifty code in this question to get the caller. both times the caller is the onchange event, however if i look at the callers caller using: arguments.callee.caller.caller the first call returns some system code as the caller (i presume) and the second call returns undefined. I am checking for undefined to only react once to onchange, but this doesnt seem ideal, whcy would onchange be called twice? UPDATE: ok, found the culprit! ...apart from me :-) but the issue of calling the companySelectListChanged function twice still stands. The onchange event is set directly on the select as mentioned. This calls the companySelectListChanged function. ..notice the 'data-entry-field' class, now in a separate linked javascript file a change event on all fields with this class is bound to a function that changes the colour of the save button. This means there is two events on the onchange, but the companySelectListChanged is called twice? The additional binding is set as follows: $('.data-entry-field').bind('keypress keyup change', function (e) { highLightSaveButtons(); }); Assuming its possible to have 2 change events on the select list, its would assume that setting keypress & keyup events may be breaking something? Any ideas?

  Read the article

• jQuery dropdown is really jumpy

  - by Matthew Westrik

  Hi, I'm making a dropdown menu with jquery (some of the code is borrowed from a tutorial by someone, although I forget who...). When I use the dropdown, it slides up and down really fast, and I can't figure it out. What do you think? HTML <div id="nav"> <ul class="topnav"> <li><a class="selected" href="#" title="home">home</a></li> <li><a href="events/" title="events calendar">events</a></li> <li><a href="photos/" title="photo gallery">photos</a></li> <li><a href="staff/" title="faculty">staff</a> <ul class="subnav"> <li><a href="#">Luke</a></li> <li><a href="#">Darth Vader</a></li> <li><a href="#">Princess Leia</a></li> <li><a href="#">Jabba the Hutt</a></li> </ul> </li> <li><a href="contact/" title="contact">contact</a></li> jQuery $(document).ready(function(){ $("ul.subnav").parent() .hover(function() { $(this).parent().find("ul.subnav").slideDown('fast').show(); //Drop down the subnav on hover... $(this).parent() .hover(function() { }, function(){ $(this).parent().find("ul.subnav").slideUp('slow'); }); $(this).parent().find("ul.subnav") .hover(function() { }, function(){ $(this).parent().find("ul.subnav").slideUp('slow'); }); }).hover(function() { $(this).addClass("subhover"); }, function(){ $(this).removeClass("subhover"); });

  Read the article

• Populating array of input fields as alternate fields using jQuery UI datepicker

  - by Micor

  I am using jquery ui datepicker in order to populate start and end dates for multiple events on the same page, the number of events is dynamic and I need to post day, month and year as separate fields, so I have something like this: <input type="text" name="event[0].startDate" class="date"/> <input type="hidden" name="event[0].startDate_day" class="startDate_day" /> <input type="hidden" name="event[0].startDate_month" class="startDate_month" /> <input type="hidden" name="event[0].startDate_year" class="startDate_year" /> <input type="text" name="event[0].endDate" class="date"/> <input type="hidden" name="event[0].endDate_day" class="endDate_day" /> <input type="hidden" name="event[0].endDate_month" class="endDate_month" /> <input type="hidden" name="event[0].endDate_year" class="startDate_year" /> event[1]... event[2]... I started working on jQuery functionality and this is what I have so far, which will populate alternate fields for startDate by class, of course it will not do what I need because I need to populate by field name rather then class: $(".date").datepicker({ onClose: function(dateText,picker) { $('.startDate_month').val( dateText.split(/\//)[0] ); $('.startDate_day').val( dateText.split(/\//)[1] ); $('.startDate_year').val( dateText.split(/\//)[2] ); }}); I need help figuring out how can I get the name of the input field within datepicker function so the alternate field assignment done by that field name + _day, month, year so this function can work for all the events on the page, making function above look more like: $(".date").datepicker({ onClose: function(dateText,picker) { $('input[' + $name + '_month' + ']').val( dateText.split(/\//)[0] ); $('input[' + $name + '_day' + ']').val( dateText.split(/\//)[1] ); $('input[' + $name + '_year' + ']').val( dateText.split(/\//)[2] ); }}); Hope that makes sense :) Thanks

  Read the article

• Do you have ideas for a workaround for this Known bug in Visual Studio 2010's addIn model ?

  - by Jesper

  When developing AddIns for Visual Studio 2010 the following line fails: CommandBarEvents handler = (EnvDTE.CommandBarEvents)m_VSStudio.DTE.Events.get_CommandBarEvents(popup); Update: Forgot to tell that m_VSStudio is of the type DTE2 Where popup is of the type CommandBarPopup (for the type CommandBarControl it works though) The line fails with this Exception: System.Runtime.InteropServices.COMException (0x80020003): Member not found. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND)) The exact same line worked in Visual Studio 2008. The purpose of the line is to get a handler which handles clickevents, when one clicks the Popup. After som searching I found this link: http://connect.microsoft.com/VisualStudio/feedback/details/524335/events-get-commandbarevents-exception-on-submenus-reproducible-bug-addin Which basicly states that it is a known bug, which will not be fixed, because there is a workaround. But unfortunately it does not state the workaround :( I would be extremely pleased if anybody has a great idea for a workaround ? The reason why I want to listen to the click events is because I want to show or hide the submenuitems (CommandBarControl) given some condition, when one clicks a menu (CommandBarPopup). So a workaround that uses something else than the click event would also be appreciated.

  Read the article

• can't get jquery livequery to with an update panel

  - by Jeremy

  I have some basic html inside an asp.net update panel. Using livequery, I set up autocomplete, blur and keydown events so that they all continue to be wired up after the update panel does a partial page load. When the page initially loads, all the events work fine but after the update panel does a partial page reload, none of the events wired up with livequery continue to work. Are there known issues with livequery and update panels? Html: <asp:UpdatePanel ID="upData" runat="server" UpdateMode="Conditional"> <ContentTemplate> <asp:DataList ID="dlData" runat="server" DataSource='<%# this.Data %>' DataKeyField="ID"> <ItemTemplate> <table> <tr> <th class="required">Location</th> <td><asp:TextBox ID="txtFromLocation" MaxLength="10" CssClass="searchlocation fromlocation required" runat="server" Text='<%# Eval("FromLocation")%>'/><asp:RequiredFieldValidator ID="rvalFromLocation" runat="server" ControlToValidate="txtFromLocation" ValidationGroup="leg">*</asp:RequiredFieldValidator></td> </tr> </table> </ItemTemplate> </asp:DataList> </ContentTemplate> </asp:UpdatePanel> And then I have my javascript. Normally it has a bunch of other code, but I can reduce it down to this and still have the problem: $(document).ready(function() { $(".searchlocation").livequery(function() { $(this).keydown(function(event) {alert('test');}); }); });

  Read the article

• Getting started with SVG graphics objects in JSF 2.0 pages.

  - by AlanObject

  What I want to do is create web pages with interactive SVG content. I had this working as a Java desktop application using Batik to render my SVG and collect UI events like mouseclick. Now I want to use those SVG graphics files in my JSF (Primefaces) web application in the same way. Trying to get started, I found this didn't work: <h:graphicImage id="gloob" value="images/sprinkverks.svg" alt="Graphic Goes Here"/> I don't mind doing some reading to get up the learning curve. It was just a bit surprising that some google searches didn't turn up anything useful. What I did find suggested that I would have to do this with the f:verbatim tag as if I were hand-coding the HTML. I would then have to add some script to capture the SVG events and feed them back into the AJAX code. If I have to do all that I will, but I was hoping there would be an easier and automated way. So the questions are: How to get the image to render in the first place? How to get the DOM events from the SVG portion of the page back to the backing beans? Much thanks for any pointers.

  Read the article

• Keys and terminology

  - by nabbed

  I have a predicament related to terminology. Our system processes events. Events are dispatched to a node based on the value of some field (or set of fields). We call this set of fields the key. We call the value of that set of fields the key value. What adds confusion is that each event is essentially a bag of key-value pairs (i.e., a hash map). So the word key is used for two different purposes: 1) to describe the set of fields on which the event is dispatched, and 2) as a field name. So if you had a collection of key-value pairs, and a set of those key-value pairs made up a database-style key, what terminology would you use to distinguish those two? (One further complication is that the key on which the event is dispatched is not always unique. For instance, if we dispatch on userid, and that user performs multiple actions, we will process multiple events with the same userid value. So maybe key is the wrong word to describe the set of fields on which we dispatch an event).

  Read the article

• jquery ajax post canceled

  - by hsemu

  I want to track the mouse click events on a set of UI components on a set of pages. To do this, I am using the following jquery/ajax call(trimmed out u): 1.Ajax call which will add the click logging. myClickLogger = { endpoint: '/path/to/my/logging/endpoint.html', logClickEvent: function(clickCode) { $.ajax({ 'type': 'POST', 'url': this.endpoint, 'async': true, 'cache': false, 'global': false, 'data': { 'clickCode':clickCode }, 'error': function(xhr,status,err){ alert("DEBUG: status"+status+" \nError:"+err); }, 'success': function(data){ if(data.status!=200){ alert("Error occured!"); } } }); } }; 2.JQuery click event which will call the ajax logger(the clickCode is an identifier for which button/image was clicked): $(document).ready(function() { $(".myClickEvent[clickName]").click(function() { var clickCode = $(this).attr("clickName"); myClickLogger.logClickEvent(clickCode); }); }); The above ajax call(1.) is "canceled" by browser whenever the button click being tracked takes to a new page. If I change 'aysnc' to 'false', then the ajax call succeeds. Also, click events which do not take to a new page succeed. Only the click events taking to new page are being canceled. I do not want to make the call synchronous. Any ideas, what could be the issue? How can I guarantee that the asynchronous call before is finished when the click event takes to a new page?

  Read the article

• adding one time options to items

  - by rap-uvic

  Hello, I'm building an Event Registration site. For any given event, we'll have a handful of items to choose from. I have a table for these items. For each event we might have special options for users. For example, for one of the events new users get to buy an item which is not available to other users. This may not apply to all the events. For other events we might have some other restriction on items. I will obviously be checking this programmatically on application side. I would like to though, set up a column containing flag in the items table. But I don't find it feasible because this condition may only apply to one particular event. I don't want all the future items to have this column. What is a good approach to take in such a situation? Should I create a special "restrictions" table and just do a join? How would I handle this on the application side?

  Read the article

• What does stdole.dll do?

  - by rc1

  We have a large C# (.net 2.0) app which uses our own C++ COM component and a 3rd party fingerprint scanner library also accessed via COM. We ran into an issue where in production some events from the fingerprint library do not get fired into the C# app, although events from our own C++ COM component fired and were received just fine. Using MSINFO32 to compare the loaded modules on a working system to those on a failing system we determined that this was caused by STDOLE.DLL not being in the GAC and hence not loaded into the faulty process. Dragging this file into the GAC caused events to come back fine from the fingerprint COM library. So what does stdole.dll do? It's 16k in size so it can't be much... is it some sort of link to another library like STDOLE32? How come its absence causes such odd behavior? How do we distribute stdole.dll? This is an XCOPY deploy app and we don't use the GAC. Should we package it as a resource and use the System.EnterpriseServices.Internal.Publish.GacInstall to ensure it's in the GAC?

  Read the article

• Destroying nested resources in restful way

  - by Alex

  I'm looking for help destroying a nested resource in Merb. My current method seems near correct, but the controller raise an InternalServerError during the destruction of the nested object. Here comes all the details concerning the request, don't hesitate to ask for more :) Thanks, Alex I'm trying to destroy a nested resources using the following route in router.resources :events, Orga::Events do |event| event.resources :locations, Orga::Locations end Which gives in jQuery request (delete_ method is a implementation of $.ajax with "DELETE"): $.delete_("/events/123/locations/456"); In the Location controller side, I've got: def delete(id) @location = Location.get(id) raise NotFound unless @location if @location.destroy redirect url(:orga_locations) else raise InternalServerError end end And the log: merb : worker (port 4000) ~ Routed to: {"format"=>nil, "event_id"=>"123", "action"=>"destroy", "id"=>"456", "controller"=>"letsmotiv/locations"} merb : worker (port 4000) ~ Params: {"format"=>nil, "event_id"=>"123", "action"=>"destroy", "id"=>"456", "controller"=>"letsmotiv/locations"} ~ (0.000025) SELECT `id`, `class_type`, `name`, `prefix`, `type`, `capacity`, `handicap`, `export_name` FROM `entities` WHERE (`class_type` IN ('Location') AND `id` = 456) ORDER BY `id` LIMIT 1 ~ (0.000014) SELECT `id`, `streetname`, `phone`, `lat`, `lng`, `country_region_city_id`, `location_id`, `organisation_id` FROM `country_region_city_addresses` WHERE `location_id` = 456 ORDER BY `id` LIMIT 1 merb : worker (port 4000) ~ Merb::ControllerExceptions::InternalServerError - (Merb::ControllerExceptions::InternalServerError)

  Read the article

• Asp.net Custom user control button. How to stop multiple clicks by user.

  - by Laurence Burke

  I am trying to modify an open source Forum called YetAnotherForum.net in the project they have a custom user control called Yaf:ThemeButton. Now its rendered as an anchor with an onclick method in this code ThemeButton.cs using System; using System.Web.UI; using System.Web.UI.WebControls; namespace YAF.Controls { /// <summary> /// The theme button. /// </summary> public class ThemeButton : BaseControl, IPostBackEventHandler { /// <summary> /// The _click event. /// </summary> protected static object _clickEvent = new object(); /// <summary> /// The _command event. /// </summary> protected static object _commandEvent = new object(); /// <summary> /// The _attribute collection. /// </summary> protected AttributeCollection _attributeCollection; /// <summary> /// The _localized label. /// </summary> protected LocalizedLabel _localizedLabel = new LocalizedLabel(); /// <summary> /// The _theme image. /// </summary> protected ThemeImage _themeImage = new ThemeImage(); /// <summary> /// Initializes a new instance of the <see cref="ThemeButton"/> class. /// </summary> public ThemeButton() : base() { Load += new EventHandler(ThemeButton_Load); this._attributeCollection = new AttributeCollection(ViewState); } /// <summary> /// ThemePage for the optional button image /// </summary> public string ImageThemePage { get { return this._themeImage.ThemePage; } set { this._themeImage.ThemePage = value; } } /// <summary> /// ThemeTag for the optional button image /// </summary> public string ImageThemeTag { get { return this._themeImage.ThemeTag; } set { this._themeImage.ThemeTag = value; } } /// <summary> /// Localized Page for the optional button text /// </summary> public string TextLocalizedPage { get { return this._localizedLabel.LocalizedPage; } set { this._localizedLabel.LocalizedPage = value; } } /// <summary> /// Localized Tag for the optional button text /// </summary> public string TextLocalizedTag { get { return this._localizedLabel.LocalizedTag; } set { this._localizedLabel.LocalizedTag = value; } } /// <summary> /// Defaults to "yafcssbutton" /// </summary> public string CssClass { get { return (ViewState["CssClass"] != null) ? ViewState["CssClass"] as string : "yafcssbutton"; } set { ViewState["CssClass"] = value; } } /// <summary> /// Setting the link property will make this control non-postback. /// </summary> public string NavigateUrl { get { return (ViewState["NavigateUrl"] != null) ? ViewState["NavigateUrl"] as string : string.Empty; } set { ViewState["NavigateUrl"] = value; } } /// <summary> /// Localized Page for the optional link description (title) /// </summary> public string TitleLocalizedPage { get { return (ViewState["TitleLocalizedPage"] != null) ? ViewState["TitleLocalizedPage"] as string : "BUTTON"; } set { ViewState["TitleLocalizedPage"] = value; } } /// <summary> /// Localized Tag for the optional link description (title) /// </summary> public string TitleLocalizedTag { get { return (ViewState["TitleLocalizedTag"] != null) ? ViewState["TitleLocalizedTag"] as string : string.Empty; } set { ViewState["TitleLocalizedTag"] = value; } } /// <summary> /// Non-localized Title for optional link description /// </summary> public string TitleNonLocalized { get { return (ViewState["TitleNonLocalized"] != null) ? ViewState["TitleNonLocalized"] as string : string.Empty; } set { ViewState["TitleNonLocalized"] = value; } } /// <summary> /// Gets Attributes. /// </summary> public AttributeCollection Attributes { get { return this._attributeCollection; } } /// <summary> /// Gets or sets CommandName. /// </summary> public string CommandName { get { if (ViewState["commandName"] != null) { return ViewState["commandName"].ToString(); } return null; } set { ViewState["commandName"] = value; } } /// <summary> /// Gets or sets CommandArgument. /// </summary> public string CommandArgument { get { if (ViewState["commandArgument"] != null) { return ViewState["commandArgument"].ToString(); } return null; } set { ViewState["commandArgument"] = value; } } #region IPostBackEventHandler Members /// <summary> /// The i post back event handler. raise post back event. /// </summary> /// <param name="eventArgument"> /// The event argument. /// </param> void IPostBackEventHandler.RaisePostBackEvent(string eventArgument) { OnCommand(new CommandEventArgs(CommandName, CommandArgument)); OnClick(EventArgs.Empty); } #endregion /// <summary> /// Setup the controls before render /// </summary> /// <param name="sender"> /// </param> /// <param name="e"> /// </param> private void ThemeButton_Load(object sender, EventArgs e) { if (!String.IsNullOrEmpty(this._themeImage.ThemeTag)) { // add the theme image... Controls.Add(this._themeImage); } // render the text if available if (!String.IsNullOrEmpty(this._localizedLabel.LocalizedTag)) { Controls.Add(this._localizedLabel); } } /// <summary> /// The render. /// </summary> /// <param name="output"> /// The output. /// </param> protected override void Render(HtmlTextWriter output) { // get the title... string title = GetLocalizedTitle(); output.BeginRender(); output.WriteBeginTag("a"); output.WriteAttribute("id", ClientID); if (!String.IsNullOrEmpty(CssClass)) { output.WriteAttribute("class", CssClass); } if (!String.IsNullOrEmpty(title)) { output.WriteAttribute("title", title); } else if (!String.IsNullOrEmpty(TitleNonLocalized)) { output.WriteAttribute("title", TitleNonLocalized); } if (!String.IsNullOrEmpty(NavigateUrl)) { output.WriteAttribute("href", NavigateUrl.Replace("&", "&amp;")); } else { // string.Format("javascript:__doPostBack('{0}','{1}')",this.ClientID,"")); output.WriteAttribute("href", Page.ClientScript.GetPostBackClientHyperlink(this, string.Empty)); } bool wroteOnClick = false; // handle additional attributes (if any) if (this._attributeCollection.Count > 0) { // add attributes... foreach (string key in this._attributeCollection.Keys) { // get the attribute and write it... if (key.ToLower() == "onclick") { // special handling... add to it... output.WriteAttribute(key, string.Format("{0};{1}", this._attributeCollection[key], "this.blur();this.display='none';")); wroteOnClick = true; } else if (key.ToLower().StartsWith("on") || key.ToLower() == "rel" || key.ToLower() == "target") { // only write javascript attributes -- and a few other attributes... output.WriteAttribute(key, this._attributeCollection[key]); } } } // IE fix if (!wroteOnClick) { output.WriteAttribute("onclick", "this.blur();this.style.display='none';"); } output.Write(HtmlTextWriter.TagRightChar); output.WriteBeginTag("span"); output.Write(HtmlTextWriter.TagRightChar); // render the optional controls (if any) base.Render(output); output.WriteEndTag("span"); output.WriteEndTag("a"); output.EndRender(); } /// <summary> /// The get localized title. /// </summary> /// <returns> /// The get localized title. /// </returns> protected string GetLocalizedTitle() { if (Site != null && Site.DesignMode == true && !String.IsNullOrEmpty(TitleLocalizedTag)) { return String.Format("[TITLE:{0}]", TitleLocalizedTag); } else if (!String.IsNullOrEmpty(TitleLocalizedPage) && !String.IsNullOrEmpty(TitleLocalizedTag)) { return PageContext.Localization.GetText(TitleLocalizedPage, TitleLocalizedTag); } else if (!String.IsNullOrEmpty(TitleLocalizedTag)) { return PageContext.Localization.GetText(TitleLocalizedTag); } return null; } /// <summary> /// The on click. /// </summary> /// <param name="e"> /// The e. /// </param> protected virtual void OnClick(EventArgs e) { var handler = (EventHandler) Events[_clickEvent]; if (handler != null) { handler(this, e); } } /// <summary> /// The on command. /// </summary> /// <param name="e"> /// The e. /// </param> protected virtual void OnCommand(CommandEventArgs e) { var handler = (CommandEventHandler) Events[_commandEvent]; if (handler != null) { handler(this, e); } RaiseBubbleEvent(this, e); } /// <summary> /// The click. /// </summary> public event EventHandler Click { add { Events.AddHandler(_clickEvent, value); } remove { Events.RemoveHandler(_clickEvent, value); } } /// <summary> /// The command. /// </summary> public event CommandEventHandler Command { add { Events.AddHandler(_commandEvent, value); } remove { Events.RemoveHandler(_commandEvent, value); } } } } now that is just cs file its handled like this in the .ascx page of the actual website <YAF:ThemeButton ID="Save" runat="server" CssClass="yafcssbigbutton leftItem" TextLocalizedTag="SAVE" OnClick="Save_Click" /> now it is given an OnClick codebehind function that does some serverside function like this protected void Save_Click(object sender, EventArgs e) { //some serverside code here } now I have a problem with the user being able to click multiple times and firing that serverside function multiple times. I have added in the code as of right now an extra onclick="this.style.display='none'" in the .cs code but that is a ugly fix I was wondering if anyone would have a better idea of disabling the ThemeButton clientside?? pls any feedback if I need to give more examples or further explain the question thanks.

  Read the article

• How to wrap a thirdparty library COM class for notifications in a C++ project

  - by geocoin

  A thirdparty vendor has provided a COM interface as an external API to their product, and for sending instructions to it, it's fine with the mechanism of generating class wrappers with visual studio by importing from the dll, then creating instances of the created classes, calling their CreateDispatch(), using the access functions and releasing when done. For return notifications, I'd normally create an EventsListener class derived from IDispatch using the Invoke function to handle events returning from the interface. This vendor has created an Events lass which I have to wrap and expose, then explicitly tell the installation where to look. all the example are given is C# where it's really easy, but I'm struggling on how to do it in C++ in the C# example, the interop dll provided is simply added as a reference and derived into a class like so: using System; using System.Runtime.InteropServices; using System.Windows.Forms; using System.Text; using <THIER INTEROP LIB> namespace some.example.namespace { [ComVisible(true)] public class EventViewer : IEvents //where IEvents is their events class { public void OnEvent(EventID EventID, object pData) //overridden function { //event handled here } } } In broad terms I assume that I must create a COM interface, since they require a ProgID from me to instantiate, but how do I derive that's been wrapped by the import and then expose the created class to COM I'm just not sure where to even start, as all the tutorials I've seen so far talk in terms of creating brand new classes not wrapping a third party one

  Read the article

• Silverlight - how to render image from non-visible data bound user control?

  - by MagicMax

  Hello! I have such situation - I'd like to build timeline control. So I have UserControl and ItemsControl on it (every row represents some person). The ItemsControl contains another ItemsControl as ItemsControl.ItemTemplate - it shows e.g. events for the person arranged by event's date. So it looks as some kind of grid with dates as a column headers and e.g. peoples as row headers. ........................|.2010.01.01.....2010.01.02.....2010.01.03 Adam Smith....|......[some event#1].....[some event#2]...... John Dow.......|...[some event#3].....[some event#4]......... I can have a lot of persons (ItemsControl #1 - 100-200 items) and a lot of events occured by some day (1-10-30 events per person in one day) the problem is that when user scrolls ItemsControl #1/#2 it happened toooo sloooooowwww due to a lot of elements should be rendered in one time (as I have e.g. a bit of text boxes and other elements in description of particular event) Question #1 - how can I improve it? May be somebody knows better way to build such user control? I have to mention that I'm using custom Virtual panel, based on some custom Virtual panel implementation found somewhere in internet... Question #2 - I'd like to make image with help of WriteableBitmap and render data bound control to image and to show image instead of a lot of elements. Problem is that I'm trying to render invisible data bound control (created in code behind) and it has actualWidth/Height equals to zero (so nothing rendered). How can I solve it? Thank you very much for you help!

  Read the article

• Avoid the collapsing effect on TreeView after updating data

  - by Manolete

  I have a TreeView used to display events. It works great, however every time new events are coming in and populating the tree collapse the tree again to the original position. That is very annoying when the refresh time is less than 1 second and it does not allow the user to interact with the items of the tree. Is there any way to avoid this behaviour? <TreeView Margin="1" BorderThickness="0" Name="eventsTree" ItemsSource="{Binding EventAlertContainers}" Background="#00000000" ScrollViewer.VerticalScrollBarVisibility="Auto" FontSize="14" VirtualizingStackPanel.IsVirtualizing="True"> <TreeView.Resources> <HierarchicalDataTemplate DataType="{x:Type C:EventAlertContainer}" ItemsSource="{Binding EventAlerts}"> <StackPanel Orientation="Horizontal"> <Image Width="20" Height="20" Margin="3,0" Source="Resources\Process_info_32.png" /> <TextBlock FontWeight="Bold" FontSize="16" Text="{Binding Description}" /> </StackPanel> </HierarchicalDataTemplate> <HierarchicalDataTemplate DataType="{x:Type C:EventAlert}" ItemsSource="{Binding Events}"> <StackPanel Orientation="Horizontal"> <Image Width="20" Height="20" Margin="0,0" Source="Resources\clock2_32.jpg" /> <TextBlock FontWeight="DemiBold" FontSize="14" Text="{Binding Name}" /> </StackPanel> </HierarchicalDataTemplate> <HierarchicalDataTemplate DataType="{x:Type C:Event}"> <StackPanel Orientation="Horizontal"> <Image Width="20" Height="20" Margin="0,0" Source="Resources\Task_32.png" /> <StackPanel Orientation="Vertical"> <TextBlock FontSize="12" Text="{Binding Name}" /> </StackPanel> </StackPanel> </HierarchicalDataTemplate> </TreeView.Resources> </TreeView>

  Read the article

• GridView onTouch

  - by Jeff

  I am trying to set up a GridView of buttons that responds to onTouch. For example, if I swipe my finger across the screen horizontally, vertically or diagonally then I want the buttons which were touched to be selected. I tried setting OnTouchListener's for the buttons, but this didn't work, only the first button in the drag event received the onTouch events. Next I tried creating an OnTouchListener for the GridView and then using the X,Y coords to determine which buttons where touched. This doesn't seem to work either since the MOTION_DOWN events are only passed to the GridView's onTouch() if I start the drag on the very edge of the GridView. In fact if I drag my finger horizontally across the grid, the onTouch events aren't fired at all unless I start the drag at the edge of the GridView. Does anyone know of a better way to do this? Thanks in advance. gridview.setOnTouchListener(new View.OnTouchListener() { @Override public boolean onTouch(@SuppressWarnings("unused") View view, MotionEvent event) { float X = event.getX(); float Y = event.getY(); switch (event.getAction()) { case MotionEvent.ACTION_DOWN: System.out.println("Down: " + X + "," + Y); break; case MotionEvent.ACTION_MOVE: System.out.println("Move: " + X + "," + Y); break; case MotionEvent.ACTION_UP: System.out.println("Up: " + X + "," + Y); break; } return true; } }

  Read the article

• Using Rails Helper Methods within ActionRecord Queries?

  - by Pygmalion

  I have a table of events (in a sqlite3 database for what it's worth) with a column called "when" that contains a timestamp detailing precisely when the event that particular row denotes is set to occur. Right now, I have @events = Event.find(:all) in my controller and I am using template helper methods to calculate where to place each event on my display page based on the day of the week it occurs on. For example: <% if(event.when.wday == 6) %> # DO SOMETHING <% end %> I want to abstract this logic to the controller however. My idea was to do the following: @thursday_events = Event.find(:all, :conditions => ["when.wday=4"]) Obviously (I guess?) this didn't work. Throwing the error "SQLite3::SQLException: near "when": syntax error: SELECT * FROM "events" WHERE (when.wday=4)". I'm assuming this is because I tried to use a helper method within a find condition but I don't know a better way to do this. Any advice? Thanks!

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >