Search Results

Search found 85307 results on 3413 pages for 'html help workshop'.

Page 138/3413 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • Please help me give this principle a name

    - by Brent Arias
    As a designer, I like providing interfaces that cater to a power/simplicity balance. For example, I think the LINQ designers followed that principle because they offered both dot-notation and query-notation. The first is more powerful, but the second is easier to read and follow. If you disagree with my assessment of LINQ, please try to see my point anyway; LINQ was just an example, my post is not about LINQ. I call this principle "dial-able power". But I'd like to know what other people call it. Certainly some will say "KISS" is the common term. But I see KISS as a superset, or a "consumerism" practice. Using LINQ as my example again, in my view, a team of programmers who always try to use query notation over dot-notation are practicing KISS. Thus the LINQ designers practiced "dial-able power", whereas the LINQ consumers practice KISS. The two make beautiful music together. I'll give another example. Imagine a C# logging tool that has two signatures allowing two uses: void Write(string message); void Write(Func<string> messageCallback); The purpose of the two signatures is to fulfill these needs: //Every-day "simple" usage, nothing special. myLogger.Write("Something Happened" + error.ToString() ); //This is performance critical, do not call ToString() if logging is //disabled. myLogger.Write( () => { "Something Happened" + error.ToString() }); Having these overloads represents "dial-able power," because the consumer has the choice of a simple interface or a powerful interface. A KISS-loving consumer will use the simpler signature most of the time, and will allow the "busy" looking signature when the power is needed. This also helps self-documentation, because usage of the powerful signature tells the reader that the code is performance critical. If the logger had only the powerful signature, then there would be no "dial-able power." So this comes full-circle. I'm happy to keep my own "dial-able power" coinage if none yet exists, but I can't help think I'm missing an obvious designation for this practice. p.s. Another example that is related, but is not the same as "dial-able power", is Scott Meyer's principle "make interfaces easy to use correctly, and hard to use incorrectly."

    Read the article

  • Can you help me fix my broken packages?

    - by Andreas Hartmann
    I would like to upgrade from 13.04 to 13.10, but some broken packages are preventing upgrade success: grep Broken /var/log/dist-upgrade/apt.log output: Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libunity9:amd64 Breaks on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) (< 7.1.2) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ i386 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libmutter0b:amd64 Breaks on libmutter0a [ amd64 ] < 3.6.3-0ubuntu2 > ( libs ) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken apache2:amd64 Conflicts on apache2.2-common [ amd64 ] < 2.2.22-6ubuntu5.1 > ( httpd ) Broken chromium-codecs-ffmpeg-extra:amd64 Conflicts on chromium-codecs-ffmpeg [ amd64 ] < 28.0.1500.71-0ubuntu1.13.04.1 -> 29.0.1547.65-0ubuntu2 > ( universe/web ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken libsnmp30:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) Broken apache2.2-bin:amd64 Breaks on gnome-user-share [ amd64 ] < 3.0.4-0ubuntu1 > ( gnome ) (< 3.8.0-2~) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken lib32asound2:amd64 Depends on libasound2 [ amd64 ] < 1.0.25-4ubuntu3.1 -> 1.0.27.2-1ubuntu6 > ( libs ) (= 1.0.25-4ubuntu3.1) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken icaclient:amd64 Depends on lib32asound2 [ amd64 ] < 1.0.25-4ubuntu3.1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken apache2-bin:amd64 Conflicts on apache2.2-bin [ amd64 ] < 2.2.22-6ubuntu5.1 -> 2.4.6-2ubuntu2 > ( httpd ) (< 2.3~) Output for cat /etc/apt/sources.list /etc/apt/sources.list.d/*.list # deb cdrom:[Ubuntu 13.04 _Raring Ringtail_ - Release amd64 (20130424)]/ raring main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ raring universe deb http://de.archive.ubuntu.com/ubuntu/ raring-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ raring multiverse deb http://de.archive.ubuntu.com/ubuntu/ raring-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu raring-security main restricted deb http://security.ubuntu.com/ubuntu raring-security universe deb http://security.ubuntu.com/ubuntu raring-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu raring partner # deb-src http://archive.canonical.com/ubuntu raring partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu raring main # deb-src http://extras.ubuntu.com/ubuntu raring main # deb http://linux.dropbox.com/ubuntu precise main output for sudo dpkg -l | grep -e "^iU" -e "^rc": rc ibm-lotus-cae 8.5.2-20100805.0821 i386 IBM Lotus Composite Application Editor rc ibm-lotus-cae-nl1 8.5.2-20100805.0821 i386 IBM Lotus CAE NL1 rc ibm-lotus-feedreader 8.5.2-20100805.0821 i386 Feeds for IBM Lotus Notes 8.5.2 rc ibm-lotus-feedreader-nl1 8.5.2-20100805.0821 i386 IBM Lotus Feed Reader NL1 rc ibm-lotus-notes 8.5.2-20100805.0821 i386 IBM Lotus Notes rc ibm-lotus-notes-core-de 8.5.2-20100805.0821 i386 IBM Lotus Notes Native German (de) rc ibm-lotus-notes-nl1 8.5.2-20100805.0821 i386 IBM Lotus Notes Java NL1 rc ibm-lotus-sametime 8.5.2-20100805.0821 i386 IBM Lotus Sametime rc ibm-lotus-symphony 8.5.2-20100805.0821 i386 IBM Lotus Symphony rc ibm-lotus-symphony-nl1 8.5.2-20100805.0821 i386 IBM Lotus Symphony NL1 rc libapache2-mod-php5filter 5.4.9-4ubuntu2.2 amd64 server-side, HTML-embedded scripting language (apache 2 filter module) rc libavcodec53:amd64 6:0.8.6-1ubuntu2 amd64 Libav codec library rc libavutil51:amd64 6:0.8.6-1ubuntu2 amd64 Libav utility library rc libmotif4:amd64 2.3.3-7ubuntu1 amd64 Open Motif - shared libraries rc linux-image-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP

    Read the article

  • Oracle Joins XBRL US To Help Drive Adoption

    - by Theresa Hickman
    Recently, Oracle joined XBRL US, the national consortium for XML business reporting standards to stay ahead of the technology and help increase XBRL adoption by U.S. companies by 2011. Large accelerated filers were mandated to use XBRL starting in 2009; other large filers started in 2010 and all other public companies must comply in June 2011. Here is a list of other organizations that recently joined XBRL US: Oracle Citi Federal Filings LLC Edgar Agents LLC XSP For those of you who have been living under a rock, XBRL stands for eXtensible Business Reporting Language. Simply put, it's reporting electronically. Just like PDFs or spreadsheets are a type of output, XBRL is another output option in electronic form. Right now, the transition to XBRL means extra work for publicly traded companies because they need to file their financial statements in both EDGAR and XBRL formats. Once the SEC phases out the EDGAR system, XBRL will be the primary way to deliver financial information with footnotes and supporting schedules to multiple audiences without having to re-key or reformat the information. A single XBRL document can be converted to printed output, published via the Web, fed into an SEC database (e.g. EDGAR) or forwarded to a creditor for analysis. Question: How does Oracle support XBRL reporting? Answer: The latest XBRL 2.1 specifications are supported by Oracle Hyperion Disclosure Management, which is part of Oracle's Hyperion Financial Close Suite along with Hyperion Financial Management, Hyperion Financial Data Quality Management and Hyperion Financial Close Management. Hyperion Disclosure Management supports the authoring of financial filings in Microsoft Office, with "hot links" to reports and data stored in Hyperion Financial Management or Oracle Essbase. It supports the XBRL tagging of financial statements as well as the disclosures and footnotes within your 10K and 10Q filings. Because many of our customers use Hyperion Financial Management (HFM) for their consolidation needs, they simply generate XBRL statements from their consolidated financial results. Question: What if you don't use Hyperion Financial Management, and you only use E-Business Suite General Ledger or PeopleSoft General Ledger? Answer: No problem, all you need is Hyperion Disclosure Management to generate XBRL from your general ledger. Here are the steps: Upload the XBRL taxonomy from the SEC or XBRL website into Hyperion Disclosure Management. Publish your financial statements out of general ledger to Excel. Perform the XBRL tag mapping from the Excel output to Hyperion Disclosure Management. For more information and some interesting background on XBRL, I recommend reading What You Need To Know About XBRL written by our EPM expert, John O'Rourke.

    Read the article

  • .htaccess not working (mod_rewrite)

    - by Mike Curry
    Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

    Read the article

  • Help with this optimization

    - by Milo
    Here is what I do: I have bitmaps which I draw into another bitmap. The coordinates are from the center of the bitmap, thus on a 256 by 256 bitmap, an object at 0.0,0.0 would be drawn at 128,128 on the bitmap. I also found the furthest extent and made the bitmap size 2 times the extent. So if the furthest extent is 200,200 pixels, then the bitmap's size is 400,400. Unfortunately this is a bit inefficient. If a bitmap needs to be drawn at 500,500 and the other one at 300,300, then the target bitmap only needs to be 200,200 in size. I cannot seem to find a correct way to draw in the components correctly with a reduced size. I figure out the target bitmap size like this: float AvatarComposite::getFloatWidth(float& remainder) const { float widest = 0.0f; float widestNeg = 0.0f; for(size_t i = 0; i < m_components.size(); ++i) { if(m_components[i].getSprite() == NULL) { continue; } float w = m_components[i].getX() + ( ((m_components[i].getSprite()->getWidth() / 2.0f) * m_components[i].getScale()) / getWidthToFloat()); float wn = m_components[i].getX() - ( ((m_components[i].getSprite()->getWidth() / 2.0f) * m_components[i].getScale()) / getWidthToFloat()); if(w > widest) { widest = w; } if(wn > widest) { widest = wn; } if(w < widestNeg) { widestNeg = w; } if(wn < widestNeg) { widestNeg = wn; } } remainder = (2 * widest) - (widest - widestNeg); return widest - widestNeg; } And here is how I position and draw the bitmaps: int dw = m_components[i].getSprite()->getWidth() * m_components[i].getScale(); int dh = m_components[i].getSprite()->getHeight() * m_components[i].getScale(); int cx = (getWidth() + (m_remainderX * getWidthToFloat())) / 2; int cy = (getHeight() + (m_remainderY * getHeightToFloat())) / 2; cx -= m_remainderX * getWidthToFloat(); cy -= m_remainderY * getHeightToFloat(); int dx = cx + (m_components[i].getX() * getWidthToFloat()) - (dw / 2); int dy = cy + (m_components[i].getY() * getHeightToFloat()) - (dh / 2); g->drawScaledSprite(m_components[i].getSprite(),0.0f,0.0f, m_components[i].getSprite()->getWidth(),m_components[i].getSprite()->getHeight(),dx,dy, dw,dh,0); I basically store the difference between the original 2 * longest extent bitmap and the new optimized one, then I translate by that much which I would think would cause me to draw correctly but then some of the components look cut off. Any insight would help. Thanks

    Read the article

  • Help needed with pyparsing [closed]

    - by Zearin
    Overview So, I’m in the middle of refactoring a project, and I’m separating out a bunch of parsing code. The code I’m concerned with is pyparsing. I have a very poor understanding of pyparsing, even after spending a lot of time reading through the official documentation. I’m having trouble because (1) pyparsing takes a (deliberately) unorthodox approach to parsing, and (2) I’m working on code I didn’t write, with poor comments, and a non-elementary set of existing grammars. (I can’t get in touch with the original author, either.) Failing Test I’m using PyVows to test my code. One of my tests is as follows (I think this is clear even if you’re unfamiliar with PyVows; let me know if it isn’t): def test_multiline_command_ends(self, topic): output = parsed_input('multiline command ends\n\n',topic) expect(output).to_equal( r'''['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - statement: ['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - terminator: ['\n', '\n'] - terminator: ['\n', '\n']''') But when I run the test, I get the following in the terminal: Failed Test Results Expected topic("['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline") to equal "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Note: Since the output is to a Terminal, the expected output (the second one) has extra backslashes. This is normal. The test ran without issue before this piece of refactoring began. Expected Behavior The first line of output should match the second, but it doesn’t. Specifically, it’s not including the two newline characters in that first list object. So I’m getting this: "['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline" When I should be getting this: "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Earlier in the code, there is also this statement: pyparsing.ParserElement.setDefaultWhitespaceChars(' \t') …Which I think should prevent exactly this kind of error. But I’m not sure. Even if the problem can’t be identified with certainty, simply narrowing down where the problem is would be a HUGE help. Please let me know how I might take a step or two towards fixing this.

    Read the article

  • Need help fixing DPKG errors after update from 12.04 to 12.10

    - by James Wulfe
    So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows: --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 --volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then --c1:setFillColor(10,105,0) --c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I'll try to frame the query better :). Thanks in advance.

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows, --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 -- volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then -- c1:setFillColor(10,105,0) -- c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I ll try to frame the query better :). Thanks in advance.

    Read the article

  • Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

    - by Eriks Goodwin-Pfister
    I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Please Help Me Install Firestorm?

    - by Elle Caszatt
    I have been trying for hours just to install one program. In this time, I've tried my best to follow directions and not screw everything up but I have. I'm new to Linux. I tried to install Firestorm and this is what happened: parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' [sudo] password for parent: Enter the desired installation directory [/opt/firestorm-install]: /home/parent/downloads - Installing to /home/parent/downloads /home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh: line 80: /home/parent/downloads/etc/refresh_desktop_app_entry.sh: Permission denied parent@ubuntu:~$ sudo opt/firestorm-install sudo: opt/firestorm-install: command not found parent@ubuntu:~$ ./etc/refresh_desktop_app_entry.sh bash: ./etc/refresh_desktop_app_entry.sh: No such file or directory parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' Enter the desired installation directory [/opt/firestorm-install]: /home/parent - Backing up previous installation to /home/parent.backup-2012-08-27 - Installing to /home/parent cp: cannot stat `/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/*': No such file or directory Failed parent@ubuntu:~$ Now whenever I go into my files it says it can't find anything. Like Cannot find home/parent/Downloads. Now, I KNOW there are downloads. I don't know why it's doing this all of a sudden. I'm so frustrated that I'm ready to just go back to Windows. I've already had to uninstall/reinstall Ubuntu once today. It's looking like I"m going to have to do it again. How can I fix my file problem that I'm now having and can someone please, please tell me how to install Firestorm? I mean they don't even have their repository listed. It's ridiculous to have to go through this over a program. Spotify wasn't hard at all to install so why is this? Someone please help, and I'm sorry if I sound like a total idiot. I'm pretty tech savvy but I'm honestly pretty upset after struggling with this for hours. Edit Okay, I see the problem with the directory files (showing the error I mentioned above when I try to click on them). I can only access my downloads, desktop, ect, through the backup that was created when I tried to install Firestorm. It's like that's the real home now. How can I get it back to the way it was? Edit Ubuntu has stopped working for me on reboot now. It doesn't go past the login screen. This is exactly what happened when I had to uninstall it before after trying to install Firestorm. Maybe I'm giving up too easily but I think I'm just going to go back to Windows. If this is what's going to happen every time I innocently try to install a program then it's just not worth it. I installed it specifically to run Firestorm because Windows sucks up a lot of CPU and causes lag. I still appreciate any input but this is just too much hassle for something that shouldn't be hard.

    Read the article

  • I need help with specific types of movement.

    - by IronGiraffe
    I'm adding movable crates to my game and I need some help with my movement code. The way I've set up my movement code the crate's X and Y are moved according to a vector2 unless it hits a wall. Here's the movement code: if (frameCount % (delay / 2) == 0) { for (int i = 0; i < Math.Abs(cSpeed.X); i++) { if (!Level.PlayerHit(new Rectangle(crateBounds.X + (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height))) { if (!Level.CollideTiles(crateBounds.X + (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height)) { if (cSpeed.X != 0) { crateBounds.X += Math.Sign(cSpeed.X); } else { Equalize(2); } } else { cSpeed.X = 0f; } } else { if (!Level.CollideTiles(crateBounds.X - (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height)) { if (cSpeed.X != 0) { crateBounds.X -= Math.Sign(cSpeed.X); } else { Equalize(2); } } else { cSpeed.X = 0f; } } } for (int i = 0; i < Math.Abs(cSpeed.Y); i++) { if (!Level.PlayerHit(new Rectangle(crateBounds.X, crateBounds.Y + Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height))) { if (!Level.CollideTiles(crateBounds.X, crateBounds.Y + Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height)) { crateBounds.Y += Math.Sign(cSpeed.Y); } else { cSpeed.Y = 0f; } } else { if (!Level.CollideTiles(crateBounds.X, crateBounds.Y - Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height)) { crateBounds.Y -= Math.Sign(cSpeed.Y); } else { cSpeed.Y = 0f; } } } } The frameCount and delay variables just slow down the movement somewhat. Anyway, I've added a tool to my game that acts as a gravity well (drawing objects into it's center; the closer they get to the center the faster they go) and what I'm trying to do is make it so that the crate will bounce off the player (and vice versa) when they collide. Thus far, my code only keeps the crate and player from getting stuck inside each other (the player can still get stuck under the crate, but I'll fix that later.) So what I'd like to know is how I can best make the crate bounce off the player. The other movement problem I'm having is related to another tool which allows the player to pick up crates and move around with them. The problem is that the crate's movement while being carried isn't tied to the movement script (it moves the crate itself, instead of adding to speed), which makes the crate go through walls and such. I know what I have to do: make the crate's speed match the player's speed while the player is holding it, but I need the crate to snap to a certain position (just in front of the player) when the player grabs it and it needs to switch to another position (just in front of the player on the other side) when they player faces the other direction while holding it. What would be the best way to make it switch places while keeping all the movement tied to the speed vector?

    Read the article

  • Desparately Need Help: After a mishap, a folder shows 0 files in it

    - by bobby
    I'm hoping some of you guys may be able to shed some light on this scenario: I had a odt document on which I was working from one of many files in a folder among many on an internal hard-drive. Some kind of glitch occured and the document crashed (this could have been some kind of power charge whilst another hard drive was being unmounted). As I looked into the folders surrounding the folder in which my odt document was stored, they start to show 0 files in them. I immediately switched off the PC and then re-started. Upon the re-start, the folders would show the 1,000s of files I've stored in them and then within 5 minutes, as I started to back them up, freeze, cut-off the process of transfer. When I tried to open anything on the internal hard-drive, be it an avi film, an mp3, a cbr or a word doc, they all showed blank or would work. Some folders had vastly less files showing. Eventually, things calmed down. I closed the PC, checked that the connections were in firmly, gave it a vacuum and restarted the PC. All the files eventually showed up and I started to back them up (which I'd brought a hard drive for anyway but been distracted and not done). All folders show except the one which contained the document I was working on at the time of the trouble. Strangely, it was one that should itself full on several occasions on restarts. It shows zero files now. Properties shows zero files and zero space taken by it. Yet when I drop a file into this folder by pasting it in, it disappears too. Opening the folder, there is nothing there. But if I paste that document again, the PC asks would I like to replace the existing file with the same name (that I can't see), when I click yes, the file appears. When I exit, the folder shows the 0 files in the folder. Going back into the folder, it has disappeared again. I'm hoping that someone can help give me tips to recover the files in the folder, it would be greatly, greatly appreciated. All other films, music, comics, documents show and are fine!

    Read the article

  • Help writing server script to ban IP's from a list

    - by Chev_603
    I have a VPS that I use as an openvpn and web server. For some reason, my apache log files are filled with thousands of these hack attempts: "POST /xmlrpc.php HTTP/1.0" 404 395 These attack attempts fill up 90% of my logs. I think it's a WordPress vulnerability they're looking for. Obviously they are not successful (I don't even have Wordpress on my server), but it's annoying and probably resource consuming as well. I am trying to write a bash script that will do the following: Search the apache logs and grab the offending IP's (even if they try it once), Sort them into a list with each unique IP on a seperate line, And then block them using the IP table rules. I am a bash newb, and so far my script does everything except Step 3. I can manually block the IP's, but that's tedious and besides, this is Linux and it's perfectly capable of doing it for me. I also want the script to be customizable so that I (or anyone else who wants to use it) can change the variables to suit whatever situation I/they may deal with in the future. Here is the script so far: #!/bin/bash ##IP LIST GENERATOR ##Author Chev Young ##Script to search Apache logs and list IP's based on custom filters ## ##Define our variables: DIRECT=~/Script ##Location of script&where to put results/temp files LOGFILE=/var/log/apache2/access.log ## Logfile to search for offenders TEMPLIST=xml_temp ## Temporary file name IP_LIST=ipstoban ## Name of results file FILTER1=xmlrpc ## What are we looking for? (Requests we want to ban) cd $DIRECT if [ ! -f $TEMPLIST ];then touch $TEMPLIST ##Create temp file fi cat $LOGFILE | grep $FILTER1 >> $DIRECT/$TEMPLIST ## Only interested in the IP's, so: sed -e 's/\([0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+\).*$/\1/' -e t -e d $DIRECT/$TEMPLIST | sort | uniq > $DIRECT/$IP_LIST rm $TEMPLIST ## Clean temp file echo "Done. Results located at $DIRECT/$IP_LIST" So I need help with the next part of the script, which should ban the IP's (incoming and perhaps outgoing too) from the resulting $IP_LIST file. I don't care if it utilizes UFW or IPTables directly, as long as it bans the IP's. I'd probably run it as a cron task. What I'm having trouble with is understanding how to use line of the result file as a seperate variable to do something like: ufw deny $IP1 $IP2 $IP3, ect Any ideas? Thanks.

    Read the article

  • Nginx config - serving index.html not working

    - by Bill
    I can't figure out how to redirect / to index.html. I've gone through the threads on serverfault and I think I've tried every suggestion including: rewrite statements within location / index index.html at the server level, within location / and within static content moving node.js proxy statements to location ~ /i instead of within location / Obviously something is wrong somewhere else in my configuration. Here is my nginx.conf: worker_processes 1; pid /home/logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; error_log /home/logs/error.log; access_log /home/logs/access.log combined; include sites-enabled/*; } and my server config located in sites-enabled server { root /home/www/public; listen 80; server_name localhost; # proxy request to node location / { index index.html index.htm; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://127.0.0.1:3010; proxy_redirect off; break; } # static content location ~ \.(?:ico|jpe?g|jpeg|gif|css|png|js|swf|xml|woff|eot|svg|ttf|html)$ { access_log off; add_header Pragma public; add_header Cache-Control public; expires 30d; } gzip on; gzip_vary on; gzip_http_version 1.0; gzip_comp_level 2; gzip_proxied any; gzip_min_length 1000; gzip_disable "msie6"; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; } Everything else is working just fine. Requests get proxied to node correctly and static content is served correctly. I just need to be able to forward requests made to / to /index.html.

    Read the article

  • How to write a bison grammer for WDI?

    - by Rizo
    I need some help in bison grammar construction. From my another question: I'm trying to make a meta-language for writing markup code (such as xml and html) wich can be directly embedded into C/C++ code. Here is a simple sample written in this language, I call it WDI (Web Development Interface): /* * Simple wdi/html sample source code */ #include <mySite> string name = "myName"; string toCapital(string str); html { head { title { mySiteTitle; } link(rel="stylesheet", href="style.css"); } body(id="default") { // Page content wrapper div(id="wrapper", class="some_class") { h1 { "Hello, " + toCapital(name) + "!"; } // Lists post ul(id="post_list") { for(post in posts) { li { a(href=post.getID()) { post.tilte; } } } } } } } Basically it is a C source with a user-friendly interface for html. As you can see the traditional tag-based style is substituted by C-like, with blocks delimited by curly braces. I need to build an interpreter to translate this code to html and posteriorly insert it into C, so that it can be compiled. The C part stays intact. Inside the wdi source it is not necessary to use prints, every return statement will be used for output (in printf function). The program's output will be clean html code. So, for example a heading 1 tag would be transformed like this: h1 { "Hello, " + toCapital(name) + "!"; } // would become: printf("<h1>Hello, %s!</h1>", toCapital(name)); My main goal is to create an interpreter to translate wdi source to html like this: tag(attributes) {content} = <tag attributes>content</tag> Secondly, html code returned by the interpreter has to be inserted into C code with printfs. Variables and functions that occur inside wdi should also be sorted in order to use them as printf parameters (the case of toCapital(name) in sample source). Here are my flex/bison files: id [a-zA-Z_]([a-zA-Z0-9_])* number [0-9]+ string \".*\" %% {id} { yylval.string = strdup(yytext); return(ID); } {number} { yylval.number = atoi(yytext); return(NUMBER); } {string} { yylval.string = strdup(yytext); return(STRING); } "(" { return(LPAREN); } ")" { return(RPAREN); } "{" { return(LBRACE); } "}" { return(RBRACE); } "=" { return(ASSIGN); } "," { return(COMMA); } ";" { return(SEMICOLON); } \n|\r|\f { /* ignore EOL */ } [ \t]+ { /* ignore whitespace */ } . { /* return(CCODE); Find C source */ } %% %start wdi %token LPAREN RPAREN LBRACE RBRACE ASSIGN COMMA SEMICOLON CCODE QUOTE %union { int number; char *string; } %token <string> ID STRING %token <number> NUMBER %% wdi : /* empty */ | blocks ; blocks : block | blocks block ; block : head SEMICOLON | head body ; head : ID | ID attributes ; attributes : LPAREN RPAREN | LPAREN attribute_list RPAREN ; attribute_list : attribute | attribute COMMA attribute_list ; attribute : key ASSIGN value ; key : ID {$$=$1} ; value : STRING {$$=$1} /*| NUMBER*/ /*| CCODE*/ ; body : LBRACE content RBRACE ; content : /* */ | blocks | STRING SEMICOLON | NUMBER SEMICOLON | CCODE ; %% I am having difficulties on defining a proper grammar for the language, specially in splitting WDI and C code . I just started learning language processing techniques so I need some orientation. Could someone correct my code or give some examples of what is the right way to solve this problem?

    Read the article

  • XHTML 1.0 DocType ignored in all browsers?

    - by John
    I was testing this, since I understood using XHTML let me use any valid XML for empty <div> elements: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=utf-8"> <title>Test</title> </head> <body> <div style="border:solid 10px black; width:100px; height:100px"></div> <div style="border:solid 10px red; width:100px; height:100px"></div> <div style="border:solid 10px blue; width:100px; height:100px"></div> <div style="border:solid 10px black; width:100px; height:100px" /> <div style="border:solid 10px red; width:100px; height:100px" /> <div style="border:solid 10px blue; width:100px; height:100px" /> </body> </html> It doesn't work in any browser I try... this is how FireBug tells me it understands the document: <html> <head> <meta content="text/html;charset=utf-8" http-equiv="Content-Type"/> <title>Test</title> </head> <body> <div style="border: 10px solid black; width: 100px; height: 100px;"/> <div style="border: 10px solid red; width: 100px; height: 100px;"/> <div style="border: 10px solid blue; width: 100px; height: 100px;"/> <div style="border: 10px solid black; width: 100px; height: 100px;"> <div style="border: 10px solid red; width: 100px; height: 100px;"> <div style="border: 10px solid blue; width: 100px; height: 100px;"/> </div> </div> </body> </html> I'm a bit confused what the point is of using XHTML if I have to do this, I might as well just use HTML? Note, that setting the content type to content="application/xhtml+xml" makes no difference in FF3 at least.

    Read the article

  • How to organize pictures on website using css? [on hold]

    - by user3624023
    Here is my website without any CSS: http://www.wmcicompsci.ca/cs20/students/theglowcloud/Bare%20bones%20website/classics_bare.html I am new to CSS and I would like to organize pictures these pictures in this fashion: http://css-tricks.com/examples/SlideinCaptions/ I would just like this layout for the pictures but I do not need the sliding of the captions(although I would like to but it does not work my browser). I would like the captions to be like titles on top of the pictures. Here is my current html code: <!DOCTYPE html> <html> <head> <title> My favourite Fantasy books</title> <meta charset = "utf-8"> <link rel="stylesheet" href="css.css"> </head> <body> <nav id="main_nav"> <ul> <li><a href = " homepage_css.html"> Homepage</a></li> <li><a href="science_fiction_css.html">Science Fiction</a></li> <li><a href="classics_css.html">Classics</a></li> <li><a href="fantasy_css.html">Fantasy</a></li> </ul> </nav> <h1> Fantasy Genre</h1> <p> Here are my favourites:</p> <ul> <li> Goblet of Fire by J.K Rowling (4th book in the Harry Potter Series) </li> <li><img class= displayed src="pics/fantasy/goblet_of_fire.jpg" width="200" alt="Goblet of Fire book cover"></li> <li> Graceling by Kristan Cashore </li> <li><img src="pics/fantasy/graceling.jpg" width="200" alt = " Graceling book cover"></li> <li> Serpent's Shadow by Rick Riordan (3rd book in the Kane Chronicles) </li> <li><img src="pics/fantasy/serpents_shadow.jpg" width="200" alt="Serpent's Shadow book cover"></li> <li> The Hobbit by J.R.R. Tolkein </li> <li><img src="pics/fantasy/the_hobbit.jpg" width="200" alt="The Hobbit book cover"></li> <li> The False Prince by Jennifer Neilson (1st book in the Ascendance Triology) </li> <li><img src="pics/fantasy/the_false_prince.jpg" width="200" alt="The False Prince book cover"></li> </ul>

    Read the article

  • Html.CheckBoxFor() checked problem in ASP.Net MVC 2

    - by inolen
    It doesn't seem that the Html.CheckBoxFor helper adds the correct "checked" attribute when rendering the HTML. I have a bool property rendered like so: <%= Html.CheckBoxFor(m => m.Visible) %> And the outputted HTML is this: <input type="checkbox" value="true" name="Visible" id="Visible"> Is there some particular reason it does not add the "checked" attribute when the value is true?

    Read the article

  • ASP.NET MVC: How to allow some HTML mark-up in Html Encoded content?

    - by Dr. Zim
    Is there some magic existing code in MVC 2 to Html.Encode() strings and allow certain html markup, like paragraph marks and breaks? (coming from a Linq to SQL database field) A horrible code example to achieve the effect: Html.Encode(Model.fieldName).Replace("&lt;br /&gt;", "<br />") What would be really nice is to overload something and pass to it an array (or object) full of allowed html tags.

    Read the article

  • RedirectMatch 301 for just html file

    - by Lee
    Hey All. I need to do a mass 301 Redirect for all pages ending with .html for my site. I am looking to move all the old .html files to a sub-folder ir. RedirectMatch 301 (.*)\.html$ http://www.domain.com/folder/$1.html When I add this and refresh the browser I get a ton of folder/folder/folder now after the url ie domain.com/folder//folder/folder/folder..... Any ideas what could be wrong? Thanks if you can help

    Read the article

  • ckeditor problem: extra html tags in source

    - by coure06
    I am creating an editor in asp.net MVC application using ckeditor. In textarea i have just written "Sample Text", but when i load the ckeditor and click on source button of ckeditor it gives me a lot of html like html body p [Sample Text]. Why its creating extra html tags?? i have to send the content to database for saving html but ckeditor is adding extra markups. any workaround? or what i am doing worng?

    Read the article

  • RegExp: want to find all links that do not end in ".html"

    - by grovel
    Hi, I'm a relative novice to regular expressions (although I've used them many times successfully). I want to find all links in a document that do not end in ".html" The regular expression I came up with is: href=\"([^"]*)(?<!html)\" In Notepad++, my editor, href=\"([^"]*)\" finds all the links (both those that end in "html" and those that do not). Why doesn't negative lookbehind work? I've also tried lookahead: href=\"[^"]*(?!html\") but that didn't work either. Can anybody help? Cheers, grovel

    Read the article

  • Setting Busy cursor for the html page with iframes having flex applications

    - by Prashant Dubey
    Hi Friends, I have a html page with 4 iframes out of these 4 one is a static html page and other 3 are html generated by flex. I have a button and list in one of the flex applications and the list will be populated on click of the button. Now what I want is to have a custom busy cursor to appear on the top of the whole html page until the list gets populated. Please tell me if its possible with an example. Thanks in advance Prahsant Dubey

    Read the article

  • HTML Agility Pack

    - by Harikrishna
    I want to parse the html table using html agility pack. I want to extract only some predefined column data from the table. But I am new to parsing and html agility pack and I have tried but I don't know how to use the html agility pack for my need. If anybody knows then give me example if possible.

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >