Search Results

Search found 408 results on 17 pages for 'broadcom'.

Page 14/17 | < Previous Page | 10 11 12 13 14 15 16 17  | Next Page >

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• why doesn't my computer resume after sleeping overnight?

  - by bamdad

  i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

  Read the article

• 12.10 Wireless networking

  - by user108594

  I downloaded ubuntu 12.10 using WUBI and cannot connect to the internet. I removed it and downloaded ubuntu 12.04 still cannot connect. This I assume rules out the program being the problem. I reinstalled 12.10. When loaded I get the same message W/red (x) stating Internet not connected. I went to the Settings drop down box and it does not reveal the network list but (enable networking has a ck mark). Am running a HP Laptop with a w/7/64 OS that has a kill switch that indicates (orangeno connection) I downloaded 12.10 on my desktop (on the same network) and everything OK. I tried to follow the instructions in the help menu but got lost and confused . Sincerely Dan Additional Info per request Broadcom 802.11b/g Wlan Internal pc [hp laptop] P.S. I've been out of town for about a month. TKS for your gitback I did install 12.10 via cd and everything ok,but retried alongside 7 and unable to connect to internet,also took laptop and hard wired using ethernet cable and everything ok. stumped again and running out of ideas!!!

  Read the article

• Cannot connect to wireless network

  - by smr

  I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

  Read the article

• Driver for asus wireless PC card WL-100GE

  - by emab

  I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Bind nic to VM on VMware ESXi 5

  - by lewis

  I have physical server with 2 Broadcom NIC's. First NIC connected to local network, via this connection we can: Connect to ESXi hypervisor (hypervisor has local ip, e.g. 192.168.1.5) Connect to VM on this hypervisor (VM has network adapter, with local ip, e.g. 192.168.1.6) Second NIC connected to "global" network. Via second link(and public IP), we can have access to VM from Internet. How I may setup VM to use second NIC's connection?

  Read the article

• How do I keep my Huawei E3131 3G modem from unmounting?

  - by John Perez

  I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work correcltly

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk PS: I could now install ubuntu with an external USB Keyboard/Mouse Set. But now, after showing the grub menu, a kernel panic error appears and booting stops :-/ Seems that the ubuntu images fit not to a macbook pro retina 13" (10,2) yet. PPS: Ok, there are new facts: If I edit the boot options and enter " nomodeset noapic" ubuntu starts and Keyboard and Touchpad work! Now I have to enable WiFi... PPPS: After installing Broadcom firmware from USB Live stick as described in other posts, WiFi was enabled. Then I could update ubuntu normally to 12.10. After this, I must not enter "nomodeset noapic" in the grub menu anymore. Last Thing now is the Touchpad. The driver seems not to be there. The touch pad is only showing as mouse. t.b.c.

  Read the article

• no volume in kubuntu 10.04

  - by neha

  hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

  Read the article

• Macbook (non-pro, late 2010) Power Management Issues relating to Nvidia-Current drivers

  - by gbvitaobscura

  I have tried many potential solutions but to no avail! (this is going to be a long post) Essentially, when I first install ubuntu (I have tested 10.11-12.04 beta) I can change the brightness of the macbook backlight. One of the first things I usually do once my machine finishes installing is enter "sudo apt-get install nvidia-current" into the terminal to get my Nvidia graphics card set up. Before I install nvidia-current power management works flawlessly. After installing nvidia-current my graphics driver works mostly properly (more on that later). When I press F1 or F2 notify osd pops up and shows icon for the backlight along with a meter which changes according to how much I press F1 or F2, but the backlight does not change brightness at all. Two supplementary facts: when I am running off of battery power the backlight does not dim ever, also changing the backlight brightness through the terminal does not work (it recognizes the command but changes nothing). Things which did not work: 1. editing xorg.conf 2. python script/hack 3. editing grub Things which did work: 1. removing Nvidia-Current Final piece of information: Although my graphics card works in every way but Power Management it can not be found through System Settings/Details (Graphics Unknown) I'm using the NVIDIA GeForce 320M. the output of lspci is: 00:00.0 Host bridge: NVIDIA Corporation MCP89 HOST Bridge (rev a1) 00:00.1 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:01.0 RAM memory: NVIDIA Corporation Device 0d6d (rev a1) 00:01.1 RAM memory: NVIDIA Corporation Device 0d6e (rev a1) 00:01.2 RAM memory: NVIDIA Corporation Device 0d6f (rev a1) 00:01.3 RAM memory: NVIDIA Corporation Device 0d70 (rev a1) 00:02.0 RAM memory: NVIDIA Corporation Device 0d71 (rev a1) 00:02.1 RAM memory: NVIDIA Corporation Device 0d72 (rev a1) 00:03.0 ISA bridge: NVIDIA Corporation MCP89 LPC Bridge (rev a2) 00:03.1 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:03.2 SMBus: NVIDIA Corporation MCP89 SMBus (rev a1) 00:03.3 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:03.4 Co-processor: NVIDIA Corporation MCP89 Co-Processor (rev a1) 00:04.0 USB controller: NVIDIA Corporation MCP89 OHCI USB 1.1 Controller (rev a1) 00:04.1 USB controller: NVIDIA Corporation MCP89 EHCI USB 2.0 Controller (rev a2) 00:06.0 USB controller: NVIDIA Corporation MCP89 OHCI USB 1.1 Controller (rev a1) 00:06.1 USB controller: NVIDIA Corporation MCP89 EHCI USB 2.0 Controller (rev a2) 00:08.0 Audio device: NVIDIA Corporation MCP89 High Definition Audio (rev a2) 00:09.0 Ethernet controller: NVIDIA Corporation MCP89 Ethernet (rev a1) 00:0a.0 IDE interface: NVIDIA Corporation MCP89 SATA Controller (rev a2) 00:0b.0 RAM memory: NVIDIA Corporation Device 0d75 (rev a1) 00:15.0 PCI bridge: NVIDIA Corporation Device 0d9b (rev a1) 00:17.0 PCI bridge: NVIDIA Corporation MCP89 PCI Express Bridge (rev a1) 01:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) 02:00.0 VGA compatible controller: NVIDIA Corporation Device 08a0 (rev a2) There is a very similar bug on Launchpad which I have posted below. https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/764195

  Read the article

• ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

  - by Fredo

  It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

  Read the article

• A Slice of Raspberry Pi

  - by Phil Factor

  Guest editorial for the ITPro/SysAdmin newsletter The Raspberry Pi Foundation has done a superb design job on their new $35 network-enabled Linux computer. This tiny machine, incorporating an ARM processor on a Broadcom BCM2835 multimedia chip, aims to put the fun back into learning computing. The public response has been overwhelmingly positive.Note that aim: "…to put the fun back". Education in Information Technology is in dire straits. It always has been, but seems to have deteriorated further still, even in the face of improved provision of equipment.In many countries, the government controls the curriculum. It predicted a shortage in office-based IT skills, and so geared the ICT curriculum toward mind-numbing training in word-processing and spreadsheet skills. Instead, the shortage has turned out to be in people with an engineering-mindset, who can solve problems with whatever technologies are available and learn new techniques quickly, in a rapidly-changing field.In retrospect, the assumption that specific training was required rather than an education was an idiotic response to the arrival of mainstream information technology. As a result, ICT became a disaster area, which discouraged a generation of youngsters from a career in IT, and thereby led directly to the shortage of people with the skills that are required to exploit the potential of Information Technology..Raspberry Pi aims to reverse the trend. This is a rig that is geared to fast graphics in high resolution. It is no toy. It should be a superb games machine. However, the use of Fedora, Debian, or Arch Linux ARM shows the more serious educational intent behind the Foundation's work. It looks like it will even do some office work too!So, get hold of any power supply that provides a 5VDC source at the required 700mA; an old Blackberry charger will do or, alternatively, it will run off four AA cells. You'll need a USB hub to support the mouse and keyboard, and maybe a hard drive. You'll want a DVI monitor (with audio out) or TV (sound and video). You'll also need to be able to cope with wired Ethernet 10/100, if you want networking.With this lot assembled, stick the paraphernalia on the back of the HDTV with Blu Tack, get a nice keyboard, and you have a classy Linux-based home computer. The major cost is in the T.V and the keyboard. If you're not already writing software for this platform, then maybe, at a time when some countries are talking of orders in the millions, you should consider it.

  Read the article

• What does the `dmesg` error: "composite sync not supported" mean?

  - by M. Tibbits

  Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Just re-installed Ubuntu 14.04, unstable wireless connection, Lenovo ThinkPad X200

  - by Mark Lawtie

  I re-installed Ubuntu 14.04 as I was having problems with unstable wireless connection... Following re-installation I am having the same problem: connection randomly dropping out, then reconnecting... all my other devices are running well when connected I am a bit of a computer novice so any help would be greatly appreciated... I am running Lenovo ThinkPad X200 laptop... Thanks! mark@mark-ThinkPad-X200:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection mark@mark-ThinkPad-X200:~$ mark@mark-ThinkPad-X200:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 026: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth Controller] Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mark@mark-ThinkPad-X200:~$

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Why am I getting a "network is unreachable" error on Ubuntu Server?

  - by jason328

  I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

  Read the article

• How to debug lag using Bluetooth connected mouse and A2DP headset?

  - by gertvdijk

  I own a Logitech M555b mouse (since a week) for use with my HP Elitebook 8570w laptop running Kubuntu 12.04. Works fine right after connecting using the KDE Bluetooth control module. However, after some time (seemingly random), it starts to lag. Movements are being delayed for roughly 500ms for a short period of time. Usually it recovers after some time too, but it can take minutes. All actions are being delayed: movements, click, scrolls. Additionally, the movements can be choppy during these times. A workaround that always works for the same short period of time is to disconnect an re-connect the mouse. This can be done using the same KDE Bluetooth control module. What did I try already? Running this at boot time: echo on > `readlink -f /sys/class/bluetooth/hci0`/../../../power/level To disable any power saving features on the Bluetooth hci0 device. Check the mouse's batteries (it's just a week old, other new batteries: same result) Checking logs and kernel messages about Bluetooth-related entries: none aside the expected messages on connect time. I'm running kernel 3.5.0-13-generic as provided in the xorg-edgers PPA. Booting the regular 3.2 Precise kernel results in the same behaviour. Some other information that may help: It happens when no other Bluetooth connections are active on the machine. Similar symptoms also occur on my Bluetooth stereo (A2DP) headset, but then it's audio lagging and skipping. Swapping Bluetooth profiles as described here then helps. Conclusion: it's not the mouse that's faulty. The headset always worked fine using my now dead Thinkpad T61p with built-in Bluetooth. The bluetooth module in my laptop is connected via USB and shows up as Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. I'm mobile and several people around me are using Bluetooth at work (A2DP mostly). It also occurs at home, where my neighbours are probably using Bluetooth as well. It could just be radio interference, but I think Bluetooth connections should just hop to another channel. And, moreover, it just works properly instantly when re-connecting. Therefore I think it's a software driver issue and I'd like to debug it. Is there any way to get more verbose logging on the Bluetooth(-hid) modules?

  Read the article

• Fan not detected by lm-sensors

  - by OrangeTux

  My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Lenovo W520 back usb port not working

  - by jaudette

  The usb port in the back of my laptop (on the right side when viewed from using perspective) is not working. Does anybody know if we can get this port working, and what the port number is. Here is my lsusb, if it can help. % lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse Bus 003 Device 003: ID 046d:c318 Logitech, Inc. Illuminated Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0765:5001 X-Rite, Inc. Huey PRO Colorimeter Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader I am running 12.10, upgraded from 12.04 but it did not work either in 12.04. The two usb ports on the left work just fine. EDIT: I just updated my bios from 1.32 to 1.39, no change in behaviour. The port does not even power up my devices. EDIT 2: Booted up windows, and the port is working. I went into the device manager and looked at the USB settings. I found my USB drive on Port 2, Hub 3, i just don't know how that relates to the Bus and Device numbers of linux. In windows, Smart card reader was on USB hub located at port 1 hub 2, fingerprint and bluetooth were on USB hub located at port 1 hub 1 EDIT 3: Went and looked at this SO post. Tried to look at my kern.log file with tail -f /var/log/kern.log. Got some activity when plugging/removing devices in other ports, but nothing happens when connecting a device into that port. It really looks disabled. Looked at my usb1-4 sys/bus/usb/devices/usb1/power/control and they are all set on auto. As expected, usb4 have version 3.00, the others (usb1-usb3) are 2.00.

  Read the article

• iScsiPrt error event ID 5

  - by AZee

  Event Log: "Failed to setup initiator portal. Error status is given in the dump data." This is being recorded every 3/100's of a second. We are using MS iSCSI Initiator on Windows Server 2003, Dell 2970 w/4GB (PAE). I am sure that this was configured by Dell initially. I have no idea what changes or mods were made since the company installed this machine until now. (I'm a new User so the lovely and vibrant screen images had to be removed. They were quite pretty and I am sure you would have been very moved and appreciative of them.) It appears that everything is installed correctly and the 5TB bound volume is accessible but I have never worked with iScsi before so I plead total ignorance. In searching I have found this to be a fairly sparce and bland documented subject. I'd like two things... First, to get rid of the error msg being logged. MS says it can be ignored if everything is working but it chews up resources logging it and I don't feel comfortable about any errors on my servers. I want to correct whatever is causing this problem. Secondly, being totally green to this, I would like to confirm that the setup is optimized and we are taking advantage of all features available. Although there are 3 NIC's in this machine it appears that the initiator is only configured for the Broadcom BMC5708C NetXtreme II on our 10.90.1.#, the other 2 NICS are 1GB on the 192.168.0.#. Would additional targets improve performance? If someone who is experienced in configuring the Microsoft iScsi Initiator can help I would really appreciate it since, as I mentioned, everything I have come across has not been of any value at all. Thanks! ~AZ

  Read the article

• Windows 2003 Domain Controller Very Upset about NIC Teaming

  - by Kyle Brandt

  I set up BACS (Broadcom Teaming) to team two NIC on a Windows 2003 Active Directory Domain Controller. Networking still works okay, I can ping the gateway etc, but both DNS and Active Directory fail to start with various 40xx errors. The team that I created is Smart load Balancing with Failover, with one backup and only one in smart load balancing (So really it is just failover). I have the team the same IP address that the single active NIC had before. Anyone seen this before, or have any ideas what the problem might be? Event Type: Error Event Source: DNS Event Category: None Event ID: 4015 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: DNS Event Category: None Event ID: 4004 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: NTDS Replication Event Category: DS RPC Client Event ID: 2087 Date: 3/7/2010 Time: 10:40:28 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: ADC Description: Active Directory could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17  | Next Page >