Search Results

Search found 4240 results on 170 pages for 'delayed execution'.

Page 153/170 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Problem with final branch in a parallel activity

  - by Dan Revell

  This might seem like a silly thing to say, the final branch in a parallel activity so I'll clarify. It's a parallel activity with three branches each containing a simple create task, on task changed and complete task. The branch containing the task that is last to complete seems to break. So every task works in it's own right, but the last one encounters a problem. Say the user clicks the final tasks link to open the attached infopath form and submits that. Execution gets to the event handler for that onTaskChanged where a taskCompleted variable gets set to true which will exit the while loop. I've successfully hit a breakpoint on this line so I know that happens. However the final activity in that branch, the completeTask doesn't get hit. When submit is clicked in the final form, the operation in progess screen says of for quite a while before returning to the workflow status page. The task that was opened and submitted says "Not Started". I can disable any of the branches to leave only two, but the same problem happens with the last to be completed. Earlier on in the workflow I do essencially the same thing. I have another 3 branch parallel activity with each brach containing a task. This one works correctly which leads me to believe that it might be a problem with having two parallel activites in the same sequential workflow. I've considered the possibility that it might be a correlation token problem. The token that every task branch uses is unique to that branch and it's owner activity name is est to that of the branch. It stands to reason that if the task complete variable is indeed getting set to true but the while loop isn't being exited, then there's a wire crossing with the variable somewhere. However I'd still have thought that the task status back on the workflow status page would at least say that the task is in progress. This is a frustrating show stopper of a bug for me. Any thoughts or suggestions would be much appricated so I can investigate them.

  Read the article

• WCF Troubleshooting from ASP.NET Client -- Help!

  - by Kobojunkie

  I am trying to call a method in my service that is as below, from an ASP.NET application. public bool ValidateUser(string username, string password) { try { // String CurrentLoggedInWindowsUserName = WindowsIdentity.GetCurrent().Name; // //primary identity of the call // String CurrentServiceSecurityContextPrimaryIdentityName = // ServiceSecurityContext.Current.PrimaryIdentity.Name; // } catch (Exception ex) { FaultExceptionFactory fct = new FaultExceptionFactory(); throw new FaultException<CustomFaultException>(fct.CreateFaultException(ex)); } return false; } The Config for the client end of my service is as below <binding name="WSHttpBinding_IMembershipService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="false" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> Problem I keep having is when I call it; I get the following exception message. Server Error in '/' Application. The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Stack Trace: [CommunicationObjectFaultedException: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.] System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +7596735 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +275 System.ServiceModel.ICommunicationObject.Close(TimeSpan timeout) +0 System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject. Close(TimeSpan timeout) +142 System.ServiceModel.ClientBase`1.Close() +38 System.ServiceModel.ClientBase`1.System.IDisposable.Dispose() +4 Controls.Membership.accountLogin.ValidateUserCredentials(String UserName, String Password) in C:\ Petition.WebClient\Controls\ Membership\accountLogin.ascx.cs:49 Controls.Membership.accountLogin.Login1_Authenticate(Object sender, AuthenticateEventArgs e) in C:\ WebClient\ Controls\Membership \accountLogin.ascx.cs:55 I am not entirely sure why I keep getting this. Just in case, here is how I call my service from the client private bool ValidateUserCredentials(string UserName, string Password) { bool boolReturnValue = false; using(Members.MembershipServiceClient client = new Controls.Members.MembershipServiceClient()) { try { boolReturnValue = client.ValidateUser(UserName, Password); } catch (FaultException<CustomFaultException> ex) { throw ex; } } return boolReturnValue; } Anyone have any idea what I need to do in this case?

  Read the article

• How to best integrate generated code

  - by Arne

  I am evaluating the use of code generation for my flight simulation project. More specifically there is a requirement to allow "the average engineer" (no offense I am one myself) to define the differential equations that describe the dynamic system in a more natural syntax than C++ provides. The idea is to devise a abstract descriptor language that can be easily understood and edited to generate C++ code from. This descriptor is supplied by the modeling engineer and used by the ones implementing and maintaining the simulation evironment to generate code. I've got something like this in mind: model Aircraft has state x1, x2; state x3; input double : u; input bool : flag1, flag2; algebraic double : x1x2; model Engine : tw1, tw2; model Gear : gear; model ISA : isa; trim routine HorizontalFight; trim routine OnGround, General; constant double : c1, c2; constant int : ci1; begin differential equations x1' = x1 + 2.*x2; x2' = x2 + x1x2; begin algebraic equations x1x2 = x1*x2 + x1'; end model It is important to retain the flexibility of the C language thus the descriptor language is meant to only define certain parts of the definition and implementation of the model class. This way one enigneer provides the model in from of the descriptor language as examplified above and the maintenance enigneer will add all the code to read parameters from files, start/stop/pause the execution of the simulation and how a concrete object gets instatiated. My first though is to either generate two files from the descriptor file: one .h file containing declarations and one .cpp file containing the implementation of certain functions. These then need to be #included at appropriate places [File Aircarft.h] class Aircraft { public: void Aircraft(..); // hand-written constructor void ReadParameters(string &file_name); // hand-written private: /* more hand wirtten boiler-plate code */ /* generate declarations follow */ #include "Aircraft.generated.decl" }; [File Aircraft.cpp] Aircarft::Aircraft(..) { /* hand-written constructer implementation */ } /* more hand-written implementation code */ /* generated implementation code follows */ #include "Aircraft.generated.impl" Any thoughts or suggestions?

  Read the article

• Can't connect in C# and google spreadsheet api

  - by RockySanders99

  Trying to access google spreadsheets using their api. following their example, the code doesnt work, and its not obvious why. All I'm trying to do is to connect, and I keep getting back the same error. This is with their code set as of 4/15/10. Can anyone offer any suggestion on what I'm doing wrong? CodE: using System; using Google.GData.Client; using Google.GData.Extensions; using Google.GData.Spreadsheets; namespace google_spreadsheet { class Program { static void Main(string[] args) { SpreadsheetsService myService = new SpreadsheetsService("MySpreadsheet" ); myService.setUserCredentials("[email protected]", "xxxxxxx"); string token1 = myService.QueryClientLoginToken(); Console.WriteLine("token is {0}", token1); Console.ReadLine(); SpreadsheetQuery query = new SpreadsheetQuery(); SpreadsheetFeed feed = myService.Query(query); Console.WriteLine("list"); foreach (SpreadsheetEntry entry in feed.Entries) { Console.WriteLine("Value: {0}", entry.Title.Text); When I run this, it keeps erroring out at the myService.Query statement, with the following error: Google.GData.Client.GDataRequestException was unhandled Message=Execution of request failed: http://spreadsheets.google.com/feeds/spreadsheets/private/full Source=Google.GData.Client ResponseString=<HTML> <HEAD> <TITLE>Not Found</TITLE> </HEAD> <BODY BGCOLOR="#FFFFFF" TEXT="#000000"> <H1>Not Found</H1> <H2>Error 404</H2> </BODY> </HTML> StackTrace: at Google.GData.Client.GDataRequest.Execute() at Google.GData.Client.GDataGAuthRequest.Execute(Int32 retryCounter) at Google.GData.Client.GDataGAuthRequest.Execute() at Google.GData.Client.Service.Query(Uri queryUri, DateTime ifModifiedSince, String etag, Int64& contentLength) at Google.GData.Client.Service.Query(Uri queryUri, DateTime ifModifiedSince) at Google.GData.Client.Service.Query(FeedQuery feedQuery) at Google.GData.Spreadsheets.SpreadsheetsService.Query(SpreadsheetQuery feedQuery) at google_spreadsheet.Program.Main(String[] args) in C:\Development Items\VS Projects\VS2008\google_spreadsheet\google_spreadsheet\Program.cs:line 21 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Net.WebException Message=The remote server returned an error: (404) Not Found. Source=System StackTrace: at System.Net.HttpWebRequest.GetResponse() at Google.GData.Client.GDataRequest.Execute() InnerException: Yet, I can take the url http://spreadsheets.google.com/feeds/spreadsheets/private/full and manually type it in with my username/password, and it works fine. Any suggestions? thanks rocky sanders

  Read the article

• Variable sized packet structs with vectors

  - by Rev316

  Lately I've been diving into network programming, and I'm having some difficulty constructing a packet with a variable "data" property. Several prior questions have helped tremendously, but I'm still lacking some implementation details. I'm trying to avoid using variable sized arrays, and just use a vector. But I can't get it to be transmitted correctly, and I believe it's somewhere during serialization. Now for some code. Packet Header class Packet { public: void* Serialize(); bool Deserialize(void *message); unsigned int sender_id; unsigned int sequence_number; std::vector<char> data; }; Packet ImpL typedef struct { unsigned int sender_id; unsigned int sequence_number; std::vector<char> data; } Packet; void* Packet::Serialize(int size) { Packet* p = (Packet *) malloc(8 + 30); p->sender_id = htonl(this->sender_id); p->sequence_number = htonl(this->sequence_number); p->data.assign(size,'&'); //just for testing purposes } bool Packet::Deserialize(void *message) { Packet *s = (Packet*)message; this->sender_id = ntohl(s->sender_id); this->sequence_number = ntohl(s->sequence_number); this->data = s->data; } During execution, I simply create a packet, assign it's members, and send/receive accordingly. The above methods are only responsible for serialization. Unfortunately, the data never gets transferred. Couple of things to point out here. I'm guessing the malloc is wrong, but I'm not sure how else to compute it (i.e. what other value it would be). Other than that, I'm unsure of the proper way to use a vector in this fashion, and would love for someone to show me how (code examples please!) :) Edit: I've awarded the question to the most comprehensive answer regarding the implementation with a vector data property. Appreciate all the responses!

  Read the article

• [NEWVERSION]algorithm || method to write prog[UNSOLVED] [closed]

  - by fatai

  I am one of the computer science student. Everyone solve problem with a different or same method, ( but actually I dont know whether they use method or I dont know whether there are such common method to approach problem.) if there are common method, What is it ? If there are different method, which method are you using ? All teacher give us problem which in simple form sometimes, but they donot introduce any approach or method(s) so that we cannot make a decision to choose the method then apply that one to problem , afterward find solution then write code.No help from teacher , push us to find method to solve homework. Ex: my friend is using no method , he says "I start to construct algorithm while I try to write prog." I have found one method when I failed the course, More accurately, my method: When I counter problem in language , I will get more paper and then ; first, input/ output step ; my prog will take this / these there argument(s) and return namely X , ex : in c, input length is not known and at same type , so I must use pointer desired output is in form of package , so use structure second, execution part ; in that step , I am writing all step which are goes to final output ex : in python ; 1.) [ + , [- , 4 , [ * , 1 , 2 ]], 5] 2.) [ + , [- , 4 , 2 ],5 ] 3.) [ + , 2 , 5] 4.) 7 ==> return 7 third, I will write test code ex : in c++ input : append 3 4 5 6 vector_x remove 0 1 desired output vector_x holds : 5 6 now, my other question is ; What is/are other method(s) which have/has been; used to construct class :::: for c++ , python, java used to communicate classes / computers used for solving embedded system problem ::::: for c by other user? Some programmer uses generalized method without considering prog-language(java , perl .. ), what is this method ? Why I wonder , because I learn if you dont costruct algorithm on paper, you may achieve your goal. Like no money no lunch , I can say no algorithm no prog therefore , feel free when you write your own method , a way which is introduced by someone else but you are using and you find it is so efficient

  Read the article

• Understanding VS2010 C# parallel profiling results

  - by Haggai

  I have a program with many independent computations so I decided to parallelize it. I use Parallel.For/Each. The results were okay for a dual-core machine - CPU utilization of about 80%-90% most of the time. However, with a dual Xeon machine (i.e. 8 cores) I get only about 30%-40% CPU utilization, although the program spends quite a lot of time (sometimes more than 10 seconds) on the parallel sections, and I see it employs about 20-30 more threads in those sections compared to serial sections. Each thread takes more than 1 second to complete, so I see no reason for them to work in parallel - unless there is a synchronization problem. I used the built-in profiler of VS2010, and the results are strange. Even though I use locks only in one place, the profiler reports that about 85% of the program's time is spent on synchronization (also 5-7% sleep, 5-7% execution, under 1% IO). The locked code is only a cache (a dictionary) get/add: bool esn_found; lock (lock_load_esn) esn_found = cache.TryGetValue(st, out esn); if(!esn_found) { esn = pData.esa_inv_idx.esa[term_idx]; esn.populate(pData.esa_inv_idx.datafile); lock (lock_load_esn) { if (!cache.ContainsKey(st)) cache.Add(st, esn); } } lock_load_esn is a static member of the class of type Object. esn.populate reads from a file using a separate StreamReader for each thread. However, when I press the Synchronization button to see what causes the most delay, I see that the profiler reports lines which are function entrance lines, and doesn't report the locked sections themselves. It doesn't even report the function that contains the above code (reminder - the only lock in the program) as part of the blocking profile with noise level 2%. With noise level at 0% it reports all the functions of the program, which I don't understand why they count as blocking synchronizations. So my question is - what is going on here? How can it be that 85% of the time is spent on synchronization? How do I find out what really is the problem with the parallel sections of my program? Thanks.

  Read the article

• Unable to disable generation of sources JAR with maven-release-plugin

  - by Chris Lieb

  I am trying to release a web project using Maven 2.2.1 and the maven-release-plugin 2.0-beta-9, but it always fails when doing release:perform on generating the sources jar for the EAR project, which makes sense since the EAR project doesn't have any source. [INFO] [INFO] [source:jar {execution: attach-sources}] [INFO] [INFO] ------------------------------------------------------------------------ [INFO] [ERROR] BUILD ERROR [INFO] [INFO] ------------------------------------------------------------------------ [INFO] [INFO] Error creating source archive: You must set at least one file. To try to disable the building of a sources JAR for the EAR project, I added the following to the POM for my EAR project (the version of the release plugin is set in a parent POM): <build> <plugins> ... <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-release-plugin</artifactId> <configuration> <useReleaseProfile>false</useReleaseProfile> </configuration> </plugin> </plugins> </build> Upon running the release again after checking in this change, I got the same error while generating the sources JAR for the EAR project, even though this should have been disabled by the previous POM snippet. What am I doing wrong? Why is the sources JAR still being built? Edit: I've tried to make the source plugin include my application.xml file so that this error doesn't occur by adding the following POM snippet: <build> <plugins> ... <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-source-plugin</artifactId> <configuration> <includes> <include>${basedir}/META-INF/**/*</include> </includes> <useDefaultExcludes>false</useDefaultExcludes> </configuration> </plugin> </plugins> </build> Unfortunately, this does not fix the problem either.

  Read the article

• OpenGL suppresses exceptions in MFC dialog-based application

  - by Mikhail

  Hello. I have an MFC-driven dialog-based application created with MSVS2005. Here is my problem step by step. I have button on my dialog and corresponding click-handler with code like this: int* i = 0; *i = 3; I'm running debug version of program and when I click on the button, Visual Studio catches focus and alerts "Access violation writing location" exception, program cannot recover from the error and all I can do is to stop debugging. And this is the right behavior. Now I add some OpenGL initialization code in the OnInitDialog() method: HDC DC = GetDC(GetSafeHwnd()); static PIXELFORMATDESCRIPTOR pfd = { sizeof(PIXELFORMATDESCRIPTOR), // size of this pfd 1, // version number PFD_DRAW_TO_WINDOW | // support window PFD_SUPPORT_OPENGL | // support OpenGL PFD_DOUBLEBUFFER, // double buffered PFD_TYPE_RGBA, // RGBA type 24, // 24-bit color depth 0, 0, 0, 0, 0, 0, // color bits ignored 0, // no alpha buffer 0, // shift bit ignored 0, // no accumulation buffer 0, 0, 0, 0, // accum bits ignored 32, // 32-bit z-buffer 0, // no stencil buffer 0, // no auxiliary buffer PFD_MAIN_PLANE, // main layer 0, // reserved 0, 0, 0 // layer masks ignored }; int pixelformat = ChoosePixelFormat(DC, &pfd); SetPixelFormat(DC, pixelformat, &pfd); HGLRC hrc = wglCreateContext(DC); ASSERT(hrc != NULL); wglMakeCurrent(DC, hrc); Of course this is not exactly what I do, it is the simplified version of my code. Well now the strange things begin to happen: all initialization is fine, there are no errors in OnInitDialog(), but when I click the button... no exception is thrown. Nothing happens. At all. If I set a break-point at the *i = 3; and press F11 on it, the handler-function halts immediately and focus is returned to the application, which continue to work well. I can click button again and the same thing will happen. It seems like someone had handled occurred exception of access violation and silently returned execution into main application message-receiving cycle. If I comment the line wglMakeCurrent(DC, hrc);, all works fine as before, exception is thrown and Visual Studio catches it and shows window with error message and program must be terminated afterwards. I experience this problem under Windows 7 64-bit, NVIDIA GeForce 8800 with latest drivers (of 11.01.2010) available at website installed. My colleague has Windows Vista 32-bit and has no such problem - exception is thrown and application crashes in both cases. Well, hope good guys will help me :) PS The problem originally where posted under this topic.

  Read the article

• .NET: Avoidance of custom exceptions by utilising existing types, but which?

  - by Mr. Disappointment

  Consider the following code (ASP.NET/C#): private void Application_Start(object sender, EventArgs e) { if (!SetupHelper.SetUp()) { throw new ShitHitFanException(); } } I've never been too hesitant to simply roll my own exception type, basically because I have found (bad practice, or not) that mostly a reasonable descriptive type name gives us enough as developers to go by in order to know what happened and why something might have happened. Sometimes the existing .NET exception types even accommodate these needs - regardless of the message. In this particular scenario, for demonstration purposes only, the application should die a horrible, disgraceful death should SetUp not complete properly (as dictated by its return value), but I can't find an already existing exception type in .NET which would seem to suffice; though, I'm sure one will be there and I simply don't know about it. Brad Abrams posted this article that lists some of the available exception types. I say some because the article is from 2005, and, although I try to keep up to date, it's a more than plausible assumption that more have been added to future framework versions that I am still unaware of. Of course, Visual Studio gives you a nicely formatted, scrollable list of exceptions via Intellisense - but even on analysing those, I find none which would seem to suffice for this situation... ApplicationException: ...when a non-fatal application error occurs The name seems reasonable, but the error is very definitely fatal - the app is dead. ExecutionEngineException: ...when there is an internal error in the execution engine of the CLR Again, sounds reasonable, superficially; but this has a very definite purpose and to help me out here certainly isn't it. HttpApplicationException: ...when there is an error processing an HTTP request Well, we're running an ASP.NET application! But we're also just pulling at straws here. InvalidOperationException: ...when a call is invalid for the current state of an instance This isn't right but I'm adding it to the list of 'possible should you put a gun to my head, yes'. OperationCanceledException: ...upon cancellation of an operation the thread was executing Maybe I wouldn't feel so bad using this one, but I'd still be hijacking the damn thing with little right. You might even ask why on earth I would want to raise an exception here but the idea is to find out that if I were to do so then do you know of an appropriate exception for such a scenario? And basically, to what extent can we piggy-back on .NET while keeping in line with rationality?

  Read the article

• Is there anyway to exclude artifacts inherited from a parent POM?

  - by Miguel

  Artifacts from dependencies can be excluded by declaring an <exclusions> element inside a <dependency> But in this case it's needed to exclude an artifact inherited from a parent project. An excerpt of the POM under discussion follows: <project> <modelVersion>4.0.0</modelVersion> <groupId>test</groupId> <artifactId>jruby</artifactId> <version>0.0.1-SNAPSHOT</version> <parent> <artifactId>base</artifactId> <groupId>es.uniovi.innova</groupId> <version>1.0.0</version> </parent> <dependencies> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>ALL-DEPS</artifactId> <version>1.0</version> <scope>provided</scope> <type>pom</type> </dependency> </dependencies> </project> base artifact, depends on javax.mail:mail-1.4.jar, and ALL-DEPS depends on another version of the same library. Due to the fact that mail.jar from ALL-DEPS exist on the execution environment, although not exported, collides with the mail.jar that exists on the parent, which is scoped as compile. A solution could be to rid off mail.jar from the parent POM, but most of the projects that inherit base, need it (as is a transtive dependency for log4j). So What I would like to do is to simply exclude parent's library from the child project, as it could be done if base was a dependency and not the parent pom: ... <dependency> <artifactId>base</artifactId> <groupId>es.uniovi.innova</groupId> <version>1.0.0</version> <type>pom<type> <exclusions> <exclusion> <groupId>javax.mail</groupId> <artifactId>mail</artifactId> </exclusion> </exclusions> </dependency> ...

  Read the article

• Managing multiple AJAX calls to PHP scripts

  - by relativelycoded

  I have a set of 5 HTML dropdowns that act as filters for narrowing results returned from a mySQL database. The three pertinent filters are for "Province", "Region", and "City" selection, respectively. I have three functions: findSchools(), which runs when any of the filters (marked with CSS class .filter) are changed, and fetches the results via AJAX from a PHP script. Once that is done, two other functions are called... changeRegionOptions(), which, upon changing the "Province" filter, and updates the available options using the same method as the first function, but posting to a different script. changeCityOptions(), which runs if the "Region" filter was changed, and updates options, again using the same method. The problem is that since I want these AJAX functions to run simultaneously, and they by nature run asynchronously, I've tried using $.when to control the execution of the functions, but it doesn't fix the problem. The functions run, but the Region and City filters return blank (no options); the FireBug report shows absolutely no output, even though the POST request went through. The posted parameter for filter_province gets sent normally, but the one for region gets cut off at the end -- it sends as filter_region=, with no value passed. So I'm presuming my logic is wrong somewhere. The code is below: // When any of the filters are changed, let's query the database... $("select.filter").change(function() { findSchools(); }); // First, we see if there are any results... function findSchools() { var sch_province = document.filterform.filter_province.value; var sch_region = document.filterform.filter_region.value; var sch_city = document.filterform.filter_city.value; var sch_cat = document.filterform.filter_category.value; var sch_type = document.filterform.filter_type.value; $.post("fetch_results.php", { filter_province : sch_province, filter_region : sch_region, filter_city : sch_city, filter_category : sch_cat, filter_type : sch_type }, function(data) { $("#results").html(""); $("#results").hide(); $("#results").html(data); $("#results").fadeIn(600); } ); // Once the results are fetched, we want to see if the filter they changed was the one for Province, and if so, update the Region and City options to match that selection... $("#filter_province").change(function() { $.when(findSchools()) .done(changeRegionOptions()); $.when(changeRegionOptions()) .done(changeCityOptions()); }); }; This is just one of the ways I've tried to solve it; I've tried using an IF statement, and tried calling the functions directly inside the general select.filter.change() function (after findSchools(); ), but they all return the same result. Any help with this would be great!

  Read the article

• chaining array of tasks with continuation

  - by Andrei Cristof

  I have a Task structure that is a little bit complex(for me at least). The structure is: (where T = Task) T1, T2, T3... Tn. There's an array (a list of files), and the T's represent tasks created for each file. Each T has always two subtasks that it must complete or fail: Tn.1, Tn.2 - download and install. For each download (Tn.1) there are always two subtasks to try, download from two paths(Tn.1.1, Tn.1.2). Execution would be: First, download file: Tn1.1. If Tn.1.1 fails, then Tn.1.2 executes. If either from download tasks returns OK - execute Tn.2. If Tn.2 executed or failed - go to next Tn. I figured the first thing to do, was to write all this structure with jagged arrays: private void CreateTasks() { //main array Task<int>[][][] mainTask = new Task<int>[_queuedApps.Count][][]; for (int i = 0; i < mainTask.Length; i++) { Task<int>[][] arr = GenerateOperationTasks(); mainTask[i] = arr; } } private Task<int>[][] GenerateOperationTasks() { //two download tasks Task<int>[] downloadTasks = new Task<int>[2]; downloadTasks[0] = new Task<int>(() => { return 0; }); downloadTasks[1] = new Task<int>(() => { return 0; }); //one installation task Task<int>[] installTask = new Task<int>[1] { new Task<int>(() => { return 0; }) }; //operations Task is jagged - keeps tasks above Task<int>[][] operationTasks = new Task<int>[2][]; operationTasks[0] = downloadTasks; operationTasks[1] = installTask; return operationTasks; } So now I got my mainTask array of tasks, containing nicely ordered tasks just as described above. However after reading the docs on ContinuationTasks, I realise this does not help me since I must call e.g. Task.ContinueWith(Task2). I'm stumped about doing this on my mainTask array. I can't write mainTask[0].ContinueWith(mainTask[1]) because I dont know the size of the array. If I could somehow reference the next task in the array (but without knowing its index), but cant figure out how. Any ideas? Thank you very much for your help. Regards,

  Read the article

• Choosing a distributed shared memory solution

  - by mindas

  I have a task to build a prototype for a massively scalable distributed shared memory (DSM) app. The prototype would only serve as a proof-of-concept, but I want to spend my time most effectively by picking the components which would be used in the real solution later on. The aim of this solution is to take data input from an external source, churn it and make the result available for a number of frontends. Those "frontends" would just take the data from the cache and serve it without extra processing. The amount of frontend hits on this data can literally be millions per second. The data itself is very volatile; it can (and does) change quite rapidly. However the frontends should see "old" data until the newest has been processed and cached. The processing and writing is done by a single (redundant) node while other nodes only read the data. In other words: no read-through behaviour. I was looking into solutions like memcached however this particular one doesn't fulfil all our requirements which are listed below: The solution must at least have Java client API which is reasonably well maintained as the rest of app is written in Java and we are seasoned Java developers; The solution must be totally elastic: it should be possible to add new nodes without restarting other nodes in the cluster; The solution must be able to handle failover. Yes, I realize this means some overhead, but the overall served data size isn't big (1G max) so this shouldn't be a problem. By "failover" I mean seamless execution without hardcoding/changing server IP address(es) like in memcached clients when a node goes down; Ideally it should be possible to specify the degree of data overlapping (e.g. how many copies of the same data should be stored in the DSM cluster); There is no need to permanently store all the data but there might be a need of post-processing of some of the data (e.g. serialization to the DB). Price. Obviously we prefer free/open source but we're happy to pay a reasonable amount if a solution is worth it. In any way, paid 24hr/day support contract is a must. The whole thing has to be hosted in our data centers so SaaS offerings like Amazon SimpleDB are out of scope. We would only consider this if no other options would be available. Ideally the solution would be strictly consistent (as in CAP); however, eventual consistence can be considered as an option. Thanks in advance for any ideas.

  Read the article

• ArithmeticException thrown during BigDecimal.divide

  - by polygenelubricants

  I thought java.math.BigDecimal is supposed to be The Answer™ to the need of performing infinite precision arithmetic with decimal numbers. Consider the following snippet: import java.math.BigDecimal; //... final BigDecimal one = BigDecimal.ONE; final BigDecimal three = BigDecimal.valueOf(3); final BigDecimal third = one.divide(three); assert third.multiply(three).equals(one); // this should pass, right? I expect the assert to pass, but in fact the execution doesn't even get there: one.divide(three) causes ArithmeticException to be thrown! Exception in thread "main" java.lang.ArithmeticException: Non-terminating decimal expansion; no exact representable decimal result. at java.math.BigDecimal.divide It turns out that this behavior is explicitly documented in the API: In the case of divide, the exact quotient could have an infinitely long decimal expansion; for example, 1 divided by 3. If the quotient has a non-terminating decimal expansion and the operation is specified to return an exact result, an ArithmeticException is thrown. Otherwise, the exact result of the division is returned, as done for other operations. Browsing around the API further, one finds that in fact there are various overloads of divide that performs inexact division, i.e.: final BigDecimal third = one.divide(three, 33, RoundingMode.DOWN); System.out.println(three.multiply(third)); // prints "0.999999999999999999999999999999999" Of course, the obvious question now is "What's the point???". I thought BigDecimal is the solution when we need exact arithmetic, e.g. for financial calculations. If we can't even divide exactly, then how useful can this be? Does it actually serve a general purpose, or is it only useful in a very niche application where you fortunately just don't need to divide at all? If this is not the right answer, what CAN we use for exact division in financial calculation? (I mean, I don't have a finance major, but they still use division, right???).

  Read the article

• how to implement a "soft barrier" in multithreaded c++

  - by Jason

  I have some multithreaded c++ code with the following structure: do_thread_specific_work(); update_shared_variables(); //checkpoint A do_thread_specific_work_not_modifying_shared_variables(); //checkpoint B do_thread_specific_work_requiring_all_threads_have_updated_shared_variables(); What follows checkpoint B is work that could have started if all threads have reached only checkpoint A, hence my notion of a "soft barrier". Typically multithreading libraries only provide "hard barriers" in which all threads must reach some point before any can continue. Obviously a hard barrier could be used at checkpoint B. Using a soft barrier can lead to better execution time, especially since the work between checkpoints A and B may not be load-balanced between the threads (i.e. 1 slow thread who has reached checkpoint A but not B could be causing all the others to wait at the barrier just before checkpoint B). I've tried using atomics to synchronize things and I know with 100% certainty that is it NOT guaranteed to work. For example using openmp syntax, before the parallel section start with: shared_thread_counter = num_threads; //known at compile time #pragma omp flush Then at checkpoint A: #pragma omp atomic shared_thread_counter--; Then at checkpoint B (using polling): #pragma omp flush while (shared_thread_counter > 0) { usleep(1); //can be removed, but better to limit memory bandwidth #pragma omp flush } I've designed some experiments in which I use an atomic to indicate that some operation before it is finished. The experiment would work with 2 threads most of the time but consistently fail when I have lots of threads (like 20 or 30). I suspect this is because of the caching structure of modern CPUs. Even if one thread updates some other value before doing the atomic decrement, it is not guaranteed to be read by another thread in that order. Consider the case when the other value is a cache miss and the atomic decrement is a cache hit. So back to my question, how to CORRECTLY implement this "soft barrier"? Is there any built-in feature that guarantees such functionality? I'd prefer openmp but I'm familiar with most of the other common multithreading libraries. As a workaround right now, I'm using a hard barrier at checkpoint B and I've restructured my code to make the work between checkpoint A and B automatically load-balancing between the threads (which has been rather difficult at times). Thanks for any advice/insight :)

  Read the article

• Python: Script works, but seems to deadlock after some time

  - by sberry2A

  I have the following script, which is working for the most part Link to PasteBin The script's job is to start a number of threads which in turn each start a subprocess with Popen. The output from each subprocess is as follows: 1 2 3 . . . n Done Bascially the subprocess is transferring 10M records from tables in one database to different tables in another db with a lot of data massaging/manipulation in between because of the different schemas. If the subprocess fails at any time in it's execution (bad records, duplicate primary keys, etc), or it completes successfully, it will output "Done\n". If there are no more records to select against for transfer then it will output "NO DATA\n" My intent was to create my script "tableTransfer.py" which would spawn a number of these processes, read their output, and in turn output information such as number of updates completed, time remaining, time elapsed, and number of transfers per second. I started running the process last night and checked in this morning to see it had deadlocked. There were not subprocceses running, there are still records to be updated, and the script had not exited. It was simply sitting there, no longer outputting the current information because no subprocces were running to update the total number complete which is what controls updates to the output. This is running on OS X. I am looking for three things: I would like to get rid of the possibility of this deadlock occurring so I don't need to check in on it as frequently. Is there some issue with locking? Am I doing this in a bad way (gThreading variable to control looping of spawning additional thread... etc.) I would appreciate some suggestions for improving my overall methodology. How should I handle ctrl-c exit? Right now I need to kill the process, but assume I should be able to use the signal module or other to catch the signal and kill the threads, is that right? I am not sure whether I should be pasting my entire script here, since I usually just paste snippets. Let me know if I should paste it here as well.

  Read the article

• SelectList in Asp-mvc and data from the database

  - by George

  Hello guys. I'm having some troubles with SelectList in ASP.MVC. Here is the issue: I have a Create View and begind a ViewModel model. The page load just fine (GET verb). But when posting, something happens, and my model is considered invalid, and it cannot insert. Here's what i've tried so far. public class DefinitionFormViewModel { private Repository<Category> categoryRepository = new Repository<Category>(); public Definition ViewDefinition { get; private set; } public SelectList Categories { get; private set; } public DefinitionFormViewModel(Definition def) { ViewDefinition = def; // here i wanted to place it directly, like shown in NerdDinner Tutorial // new SelectList(categoryRepository.All(),ViewDefinition.Category); Categories = new SelectList(categoryRepository.All(), "CategoryId", "CategoryName", ViewDefinition.CategoryId); } } // pageview which inherits DefinitionFormViewModel <div class=editor-field"> <%= Html.DropDownList("Category",Model.Categories) %> <%= Html.ValidationMessageFor(model => Model.ViewDefinition.Category) %> </div> // controller methods [Authorize] public ActionResult Create() { Definition definition = new Definition(); return View(new DefinitionFormViewModel(definition)); } [AcceptVerbs(HttpVerbs.Post), Authorize] public ActionResult Create(int id,Definition definition) { Term term = termRepository.SingleOrDefault(t => t.TermId == id); if (term == null) { return View("NotFound", new NotFoundModel("Termo não encontrado", "Termo não encontrado", "Nos desculpe, mas não conseguimos encontrar o termo solicitado.", "Indíce de Termos", "Index", "Term")); } else { if (ModelState.IsValid) { try { definition.TermId = term.TermId; definition.ResponsibleUser = User.Identity.Name; UpdateModel(definition); term.Definitions.Add(definition); termRepository.SaveAll(); return RedirectToAction("Details", "Term", new { id = term.TermId }); } catch (System.Data.SqlClient.SqlException sqlEx) { ModelState.AddModelError("DatabaseError", "Houve um erro na inserção desta nova definição"); } catch { foreach (RuleViolation rv in definition.GetRuleViolations()) { ModelState.AddModelError(rv.PropertyName, rv.ErrorMessage); } } } } return View(new DefinitionFormViewModel(definition)); } I'm sorry about the long post, but I cant figure this out. I got no graphic errors or exceptions. My execution terminates in if (ModelState.IsValid). Thanks for your time George

  Read the article

• Need Help with Consolidating RoR Google Map Results

  - by Kevin

  I have a project that returns geocoded results within 20 miles of the user. I want these results grouped on the map by zip code, then within the info window show the individual results. The code posted below works, but for some reason it only displays the 1.png rather than looking at the results and using the correct .png icon associated with the number. When I look at the infowindows, it displays the correct png like "/images/2.png" or "/images/5.png" but the actual image is always 1. @ziptickets = Ticket.find(:all, :origin => coords, :select => 'DISTINCT zip, lat, lng', :within => @user.distance_to_travel, :conditions => "status_id = 1") for t in @ziptickets zips = Ticket.find(:all, :conditions => ["zip = ?", t.zip]) currentzip = t.zip.to_s tixinzip = zips.size.to_s imagelocation = "/images/" + tixinzip + ".png" shadowlocation = "/images/" + tixinzip + "s.png" @map.icon_global_init(GIcon.new(:image => imagelocation, :shadow => shadowlocation, :shadow_size => GSize.new(60,40), :icon_anchor => GPoint.new(20,20), :info_window_anchor => GPoint.new(9,2)), "test") newicon = Variable.new("test") new_marker = GMarker.new([t.lat, t.lng], :icon => newicon, :title => imagelocation, :info_window => currentzip) @map.overlay_init(new_marker) end I tried changing the last part of the mapicon from: :info_window_anchor => GPoint.new(9,2)), "test") newicon = Variable.new("test") to: :info_window_anchor => GPoint.new(9,2)), currentzip) newicon = Variable.new(currentzip) but the strangest thing is that any string that has numbers in it causes the map to fail to render in the view and just show a blank screen... same if I replace it with :info_window_anchor => GPoint.new(9,2)), "123") newicon = Variable.new("123") Any advice would be helpful... also it runs a bit slower than my previous code which just set up 4 standard icons and used them outside of the loop so any hints as to speed up execution would be appreciated greatly. Thanks!

  Read the article

• Parameters not being passed into template when using the .Net transform classes

  - by Chris F

  I am using the .Net XslCompiledTranform to run some simple XSLT (see below for a simplified example). The example XSLT is meant to do simply show the value of the parameter that is passed in to the template. The output is what I expect it to be (i.e. <result xmlns:p1="http://www.doesnotexist.com"> <valueOfParamA>valueA</valueOfParamA> </result> when I use Saxon 9.0, but when I use XslCompiledTransform (XslTransform) in .net I get <result xmlns:p1="http://www.doesnotexist.com"> <valueOfParamA></valueOfParamA> </result> The problem is that that the parameter value of paramA is not being passed into the template when I use the .Net classes. I completely stumped as to why. when I step through in Visual Studio, the debugger says that the template will be called with paramA='valueA' but when execution switches to the template the value of paramA is blank. Can anyone explain why this is happening? Is this a bug in the MS implementation or (more likely) am I doing something that is forbidden in XSLT? Any help greatly appreciated. This is the XSLT that I am using <?xml version="1.0" encoding="utf-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:extfn="http://exslt.org/common" exclude-result-prefixes="extfn" xmlns:p1="http://www.doesnotexist.com"> <!-- Replace msxml with xmlns:extfn="http://exslt.org/common" xmlns:extfn="urn:schemas-microsoft-com:xslt" --> <xsl:output method="xml" indent="yes"/> <xsl:template match="/"> <xsl:variable name="resultTreeFragment"> <p1:foo> </p1:foo> </xsl:variable> <xsl:variable name="nodeset" select="extfn:node-set($resultTreeFragment)"/> <result> <xsl:apply-templates select="$nodeset" mode="AParticularMode"> <xsl:with-param name="paramA" select="'valueA'"/> </xsl:apply-templates> </result> </xsl:template> <xsl:template match="@* | node()" mode="AParticularMode"> <xsl:param name="paramA"/> <valueOfParamA> <xsl:value-of select="$paramA"/> </valueOfParamA> </xsl:template> </xsl:stylesheet>

  Read the article

• sharepoint custom aspx page with database connection

  - by Megini

  hi there i have created a custom aspx page whithin my sharepoint site with a sql server connection to a database on that server to select data when i view the page it works but when another user tries to view it it gives the following error : Server Error in '/' Application. Login failed for user 'GRINCOR\GuguK'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'GRINCOR\GuguK'. Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL: Add a "Debug=true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" % or: 2) Add the following section to the configuration file of your application: Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode. Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario. Stack Trace: [SqlException (0x80131904): Login failed for user 'GRINCOR\GuguK'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +248 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +245 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2811 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +53 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +327 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +2445370 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +2445224 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +354 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +703 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +54 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +2414776 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +92 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +1657 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +84 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +1645767 System.Data.SqlClient.SqlConnection.Open() +258 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa__233736835.DisplayData() in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:151 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa_233736835._RenderMain(HtmlTextWriter __w, Control parameterContainer) in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:346 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240 Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3601 can someone give me a solution to this problem ? i am using sharepoint services 3.0

  Read the article

• Make a compiled binary run at native speed flawlessly without recompiling from source on a another system?

  - by unknownthreat

  I know that many people, at a first glance of the question, may immediately yell out "Java", but no, I know Java's qualities. Allow me to elaborate my question first. Normally, when we want our program to run at a native speed on a system, whether it be Windows, Mac OS X, or Linux, we need to compile from source codes. If you want to run a program of another system in your system, you need to use a virtual machine or an emulator. While these tools allow you to use the program you need on the non-native OS, they sometimes have problems of performance and glitches. We also have a newer compiler called "JIT Compiler", where the compiler will parse the bytecode program to native machine language before execution. The performance may increase to a very good extent with JIT Compiler, but the performance is still not the same as running it on a native system. Another program on Linux, WINE, is also a good tool for running Windows program on Linux system. I have tried running Team Fortress 2 on it, and tried experiment with some settings. I got ~40 fps on Windows at its mid-high setting on 1280 x 1024. On Linux, I need to turn everything low at 1280 x 1024 to get ~40 fps. There are 2 notable things though: Polygon model settings do not seem to affect framerate whether I set it low or high. When there are post-processing effects or some special effects that require manipulation of drawn pixels of the current frame, the framerate will drop to 10-20 fps. From this point, I can see that normal polygon rendering is just fine, but when it comes to newer rendering methods that requires graphic card to the job, it slows down to a crawl. Anyway, this question is rather theoretical. Is there anything we can do at all? I see that WINE can run STEAM and Team Fortress 2. Although there are flaws, they can run at lower setting. Or perhaps, I should also ask, "is it possible to translate one whole program on a system to another system without recompiling from source and get native speed?" I see that we also have AOT Compiler, is it possible to use it for something like this? Or there are so many constraints (such as DirectX call or differences in software architecture) that make it impossible to have a flawless and not native to the system program that runs at native speed?

  Read the article

• How to access controller dynamic properties within a base controller's constructor in Grails?

  - by 4h34d

  Basically, I want to be able to assign objects created within filters to members in a base controller from which every controller extends. Any possible way to do that? Here's how I tried, but haven't got to make it work. What I'm trying to achieve is to have all my controllers extend a base controller. The base controller's constructor would be used to assign values to its members, those values being pulled from the session map. Example below. File grails-app/controllers/HomeController.groovy: class HomeController extends BaseController { def index = { render username } } File grails-app/controllers/BaseController.groovy: abstract class BaseController { public String username public BaseController() { username = session.username } } When running the app, the output shown is: 2010-06-15 18:17:16,671 [main] ERROR [localhost].[/webapp] - Exception sending context initialized event to listener instance of class org.codehaus.groovy.grails.web.context.GrailsContextLoaderListener org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'pluginManager' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is java.lang.RuntimeException: Unable to locate constructor with Class parameter for class org.codehaus.groovy.grails.commons.DefaultGrailsControllerClass ... Caused by: java.lang.RuntimeException: Unable to locate constructor with Class parameter for class org.codehaus.groovy.grails.commons.DefaultGrailsControllerClass ... Caused by: java.lang.reflect.InvocationTargetException ... Caused by: org.codehaus.groovy.grails.exceptions.NewInstanceCreationException: Could not create a new instance of class [com.my.package.controller.HomeController]! ... Caused by: groovy.lang.MissingPropertyException: No such property: session for class: com.my.package.controller.HomeController at com.my.package.controller.BaseController.<init>(BaseController.groovy:16) at com.my.package.controller.HomeController.<init>(HomeController.groovy) ... 2010-06-15 18:17:16,687 [main] ERROR core.StandardContext - Error listenerStart 2010-06-15 18:17:16,687 [main] ERROR core.StandardContext - Context [/webapp] startup failed due to previous errors And the app won't run. This is just an example as in my case I wouldn't want to assign a username to a string value, but rather a few objects pulled from the session map. The objects pulled from the session map are being set within filters. The alternative I see is being able to access the controller's instance within the filter's execution. Is that possible? Please help! Thanks a bunch!

  Read the article

• Problem in Fetching Table contents when adding rows in same table

  - by jasmine

  Im trying to write a function for adding category: function addCategory() { $cname = mysql_fix_string($_POST['cname']); $kabst = mysql_fix_string($_POST['kabst']); $kselect = $_POST['kselect']; $kradio = $_POST['kradio']; $ksubmit = $_POST['ksubmit']; $id = $_POST['id']; if($ksubmit){ $query = "INSERT INTO category VALUES (' ', '{$cname}', '{$kabst}', {$kselect}, {$kradio}, ' ') "; $result = mysql_query($query); if ($result) { echo "ok"; } else{ echo $query ; } } $text .= '<div class="form"> <h2>ADD new category</h2> <form action="?page=addCategory" method="post"> <ul> <li><label>Category</label></li> <li><input name="cname" type="text" class="inp" /></li> <li><label>Description</label></li> <li><textarea name="kabst" cols="40" rows="10" class="inx"></textarea></li> <li>Published:</li> <li> <select name="kselect" class="ins"> <option value="1">Active</option> <option value="0">Passive</option> </select> </li> <li>Show in home page:</li> <li> <input type="radio" name="kradio" value="1" /> yes <input type="radio" name="kradio" value="0" /> no </li> <li>Subcategory of</li> <li> <select>'; while ($row = mysql_fetch_assoc(mysql_query("SELECT * FROM category"))){ $text .= '<option>'.$row['name'].'</option>'; } $text .= '</select> </li> <li><input name="ksubmit" type="submit" value="ekle" class="int"/></li> </ul> </form> '; return $text;} And the error: Fatal error: Maximum execution time of 30 seconds exceeded What is wrong in my function?

  Read the article

• Inline HTML Syntax for Helpers in ASP.NET MVC

  - by kouPhax

  I have a class that extends the HtmlHelper in MVC and allows me to use the builder pattern to construct special output e.g. <%= Html.FieldBuilder<MyModel>(builder => { builder.Field(model => model.PropertyOne); builder.Field(model => model.PropertyTwo); builder.Field(model => model.PropertyThree); }) %> Which outputs some application specific HTML, lets just say, <ul> <li>PropertyOne: 12</li> <li>PropertyTwo: Test</li> <li>PropertyThree: true</li> </ul> What I would like to do, however, is add a new builder methid for defining some inline HTML without having to store is as a string. E.g. I'd like to do this. <% Html.FieldBuilder<MyModel>(builder => { builder.Field(model => model.PropertyOne); builder.Field(model => model.PropertyTwo); builder.ActionField(model => %> Generated: <%=DateTime.Now.ToShortDate()%> (<a href="#">Refresh</a>) <%); }).Render(); %> and generate this <ul> <li>PropertyOne: 12</li> <li>PropertyTwo: Test</li> <li>Generated: 29/12/2008 <a href="#">Refresh</a></li> </ul> Essentially an ActionExpression that accepts a block of HTML. However to do this it seems I need to execute the expression but point the execution of the block to my own StringWriter and I am not sure how to do this. Can anyone advise?

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >