Search Results

Search found 57567 results on 2303 pages for 'windows activation'.

Page 156/2303 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Windows 7 KSOD On Login

  - by Brandon Bertelsen

  For those that are unaware, KSOD means blacK Screen of Death. Essentially, when windows starts my computer shows only the cursor and a black screen. It seems like any and all shell elements are disabled (or perhaps not started). I have seen a number of these questions asked, none of which have matched my situation. CTRL + ALT + ... does not respond Restarting in safe mode, results in the same KSOD sfc /scannow seems to have no effect when typed at the command prompt that is accessed using the recovery tools via the install disk Update to item 3: sfc /scannow reports: There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again. However, Windows does not restart past KSOD. Update to item 3 as per Soandos comment re: /offbootdir sfc /scannow /offbotdir=e:\ /windir=e:\windows "Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log..."

  Read the article

• "TMGR is Missing" after repair-installing Windows XP

  - by djzmo

  Hello there, I have two OSes installed in my computer. - Windows XP Professional - Windows 7 Ultimate (Release Candidate 1/Build 7100) I used the Windows 7 boot loader by default to choose between OSes. When I was using my WinXP, my computer gets lagged suddenly and continuously, and the only way to fix it is by repair-installing it (because I've experienced this many times before, but without W7 installed). Everything goes OK. But when my XP was successfully reinstalled, I cannot boot my Windows 7 anymore. Every time I tried to boot the harddisk that contains W7, an error appeared. "TMGR is Missing". Now I have no idea how can I get back to my Windows 7. Any kind of help would be appreciated! :)

  Read the article

• Windows-Server-2003 setup on Dell-PowerEdge R310 is hanging [closed]

  - by Robert Rose

  Possible Duplicate: Problems installing OS on Dell PowerEdge R410 I am trying to configure a Dell PowerEdge R310 server with Windows Server 2003. I've already configured the two hard drives as RAID1. The HD controller is PERC H700 Integrated and Adapter. Trying to stay with Windows Server 2003 on this fairly new server to save on cost and keep the configuration the same as my old server, which has been running like a champ for five years. Problem: During the OS installation, after everything has been copied from the installation CD, the installation hangs at a window labeled 'Windows Setup' with the message 'Setup is starting Windows' at the bottom. I'm wondering if this is a driver problem and if so, where can I get the drivers for the R310 or where can I get the media for the latest version of Windows Server 2003 which may include the necessary drivers? Will certainly appreciate some help here.

  Read the article

• Original Windows 7 Home Premium on Acer Aspire 5740G

  - by elr

  Is it posible to get the original Windows 7 Home Premium 64bit for the Acer Aspire 5740G? I bought this notebook and the license for this Windows is in the package. There is an partition with the data for the recovery. But than, there are a lot of senseless application which I don't want to use. I'm searchin for the complete clear Windows 7 Home Premium. I tried to download the original Windows 7 Home Premium and entered the serial key of the bottom of the laptop but I can't activate my Windows with this key. Any ideas or experiens with this?

  Read the article

• Bluetooth device won't re-add after being removed (Windows 7)

  - by HericDenis

  I've got a SBH52 headset, it works fine on my android phone, then I tried to use it with my Windows 7 PC, then it won't work because Microsoft Windows dosen't have native support for A2DP connections and one of the answers on the previous link said that removing the device from "devices and printers", running this software and then re-add the device would solve the problem. But the big problem is that they won't pair again: I tried, hopelessly, the suggested fixes from Windows, it won't work. By the way, it is Windows 7 (x64), it just looks like Windows 8. I had this problem once many years ago with other PC and Bluetooth device, I remember it had something to do with drivers that were not removed and I tried to delete them from somewhere, and as far as I remember it worked, but no idea how. In short, how can I pair it again with my PC?

  Read the article

• Making Windows Explorer to Search WebDAV Server using DASL

  - by user124209

  I am trying to setup search in a WebDAV repository in IIS 6 on Windows Server 2003 R2. I successfully configured WebDAV in IIS and enabled my repository indexing as described in Searching WebDAV Directories (IIS 6.0) I have verified that search is now supported by my WebDAV server, in OPTIONS request I can see DASL support: DASL: <DAV:sql> DAV: 1, 2 Public: OPTIONS, TRACE, GET, HEAD, DELETE, PUT, POST, COPY, MOVE, MKCOL, PROPFIND, PROPPATCH, LOCK, UNLOCK, SEARCH Allow: OPTIONS, TRACE, GET, HEAD, DELETE, COPY, MOVE, PROPFIND, PROPPATCH, SEARCH, MKCOL, LOCK, UNLOCK I connected to my WebDAV server from a client computer, which is Windows 8.1 and WebDAV is working well. I mounted a drive and connected using \\server@port\DawWWWRoot as described here. However my client computer, which is Windows 7, does not generate any search request. I have captured requests using Fiddler tool and found that Windows Explorer is not sending any search requests, instead it is sending a PROPFIND and downloading files. How do I make Windows Explorer to send SEARCH request to my WebDAV server?

  Read the article

• Create and Utilize a Vista VHD via Windows 7

  - by ChrisHDog

  I have a windows 7 base install and a windows 7 vhd. I am attempting to create the scenario where when I boot up I have the option of loading the windows 7 base, the windows 7 vhd or a vista vhd. I used virtual PC to create a vista vhd and then used bcdedit to set up that vhd as an option on start up. When I select that option though it goes to a repairing installation screen, fails and asks to restart (repeats if i try and select that option again). Anyone know either a) what is happening in my situation and what i can do to fix it or b) a good tutorial/reference on how to create and use a vista vhd from windows 7

  Read the article

• openLdap for windows and phpldapadmin

  - by Dr Casper Black

  Hi, Im having a problem connecting all of this. Im new to Ldap and after failing to install all of this on Ubuntu 10.04 Im trying to set it up on my local PC. I installed OpenLdap for windows http://www.userbooster.de/en/download/openldap-for-windows.aspx, Enabled the php5.3.1 extension for ldap (c:\xampp\php\ext\php_ldap.dll) in php.ini Copied the ssleay32.dll and libeay32.dll to Windows\System32 & Windows\System (Windows XP) Set the password generated by c:\Program Files\OpenLDAP\slappasswd.exe in c:\Program Files\OpenLDAP\slapd.conf (rootpw {SSHA}hash) run the c:\Program Files\OpenLDAP\slapd.exe Install phpldapadmin and call https:// 127.0.0.1 / phpldapadmin/ when I enter the credentials i get Invalid credentials (49) for user and in openldap.log i get could not stat config file "%SYSCONFDIR%\slapd.conf": No such file or directory (2) Can someone help.

  Read the article

• Windows CA to issue certificate to authenticate SSH to a Linux server

  - by BArnold

  I have a Windows Server Root Certificate Authority, Linux SSH server, and users with Windows SSH clients. The Linux box is not part of the AD domain (and probably never will be [sigh]) OpenSSH 5.4 and above supports X.509 certiicate based authentication. I am trying to find a way to use my Windows Certificate Authority to issue certificates for authentication of the users when the SSH to the Linux box. I do not want to have to generate a keypair on each user's desktop. And we want the certificates controlled and revokable at the Windows CA. My question is not exactly the same as SSH from Windows to Linux with AD certificates (and the referenced moelinux.net seems to be down) I have searched Google a lot, and haven't found much results about how to accomplish this. An answer doesn't necessarily have to include a full tutorial, even some hints about what to search on or pointers to some references may be helpful.

  Read the article

• Second partition with Windows 7 unmountable

  - by Florian Pilz

  I'm using GRUB2 to dualboot Ubuntu and Windows 7. I installed Windows 7 some days ago and rewrote GRUB2 to cope with the dualboot. Everything went fine till yesterday - I could boot into both OS. Since this morning my laptop restarts every time I choose Windows 7 from the menu. Ubuntu is still working. As I tried to mount the partition with Windows 7 on Ubuntu it gave me return code 2, so this isn't working as well. I tried to reinstall GRUB2 to the MBR but it didn't help. I also tried to repair Windows 7 boot with it's install DVD, while trying so it showed me the following error: "Status: 0xc000000f Info: Boot selection failed because a required device is inaccessible." Tanks in advance

  Read the article

• Cannot run setups from a mapped network drive on Windows 7

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. The same action did work on Windows 2000, Windows XP and Windows Vista. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior?

  Read the article

• Change from IDE to AHCI after installing Windows 8

  - by Louis

  I had my drive controller configured for IDE when I installed Windows 7. This didn't change when I upgraded to Windows 8. I now need to enable AHCI, but doing so causes Windows to fail to start. It doesn't know how to automatically fix the problem. I was able to use Regedit from the recovery area, in order to try using this fix that worked for Vista. That key is missing in Windows 8, however. I read that the relevant key is now in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci. But my settings already match the changes they suggest making. How can I get Windows to boot after enabling AHCI in the BIOS?

  Read the article

• Hardware Acceleration on Windows Server 2008

  - by user1184598

  Does Windows Server 2008 have hardware acceleration? I tried to use WPF to make over 20,000 drawings. It only cause around 40% CPU in windows 7. However, I run the same program on Windows Server 2008 with the same hardware configuration except that it has a dedicated graphical display card (GT 9500) while Windows 7 has only an onboard display card, it cause over 80% CPU. So, does Windows Server 2008 have hardware acceleration? Or could I make it? And how do I change the hardware acceleration setting? Thanks.

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Error message during installation of Windows XP Professional

  - by user270686

  During installation of Windows XP Professional the installer had an error which points to a bad CD, so I got another one and tried it, but the same thing happened. What can I do? It says: One of the components Windows needs to continue could not be installed.. The component is called: sys.dll D:/i386/asms/1000/msft/windows/gdiplus/gdiplus.man. I tried running chkdsk /f to fix the errors on the disk. I've searched the internet all day, and I don't know what else to do. I get this error message: SYS.DLL Syntax error in manifest or policy file D:/i386/asms/1000/msft/windows/gdiplus/gdiplus.man on line 4 Error Installation failed d:/I386/asms Error message Data Error (cyclic redundancy check) Fatal error One of the components Windows needs to continue could not be installed. If you are using a CD there might be a problem with the CD try cleaning it and trying again or using another CD.

  Read the article

• Windows 7 Keeps Changing the MBR on boot

  - by steven

  I am having an issue with Windows 7 changing the boot order everytime I start up. I have 4 partitions: boot linux windows. Grub is installed on the boot, and boots up both operating systems fine, however when I boot to Windows the bootable partition is changed to Windows and the MBR is rewritten. How do I stop this? Its rather annoying to have to boot, chroot and fix this problem everytime. I also don't want to use the Windows boot select.

  Read the article

• windows 7 file and printer sharing doesnt work for me

  - by EmRa228

  a few days ago, i havent any problem but now I cant use file and printer sharing on the windows 7 but everyone on the network can. maybe I install some program that make this change or disable a windows services! (Like: proxifier, ...) Now: -I can ping everyone on the network. -everyone can ping me. -I cant see their computers in windows 7 "Networks" So, I cant use file and printer sharing. -everyone can see my computer in windows 7 "Networks" and also can use my file and printer sharing. -with a LAN messenger program, we(I & everyone) can text chat, video chat and transfer file. . . I want see another computer on the network and use windows 7 file and printer sharing!!!

  Read the article

• Mac OS X vs. Windows mouse wheel scrolling

  - by Znarkus

  Mac OS X determines what area to scroll by the mouse position. Windows does this by what application is active. So I thought anyway. If Notepad++ is the active application in Windows, I can scroll underlying applications by placing the mouse pointer on them. But this seems like the only application with this behaviour. Windows Explorer (Win7) doesn't even allow scrolling in the side pane if the pane is not active. My question is, can this be controlled by developers, and why is Windows behaving like this? I am not about to make a Windows application, but as a developer this makes me curious (and annoyed).

  Read the article

• windows 7 sound stopped working out of nowhere

  - by jeff

  hi, i have had windows 7 installed for a few months, working fine with soundblaster xi around 7p was watching youtube videos with sound went and made dinner around 9p came back, realized there was no sound coming out of speakers, even though windows mixer shows sound output restarted, no sound uninstalled driver, restarted had windows search for driver, it installed, windows mixer showed sound bar moving while playing an mp3 but couldn't hear i've tested with speakers plugged into soundblaster, as well as headphones plugged into the audio port on the front of my computer. what could have happened? what could the solution be? EDIT wow, check out the crazy similarities between my post and this one: (the solution didn't solve my issue) http://superuser.com/questions/56450/why-would-sound-suddenly-stop-working-on-windows-7/92957#92957

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• How to browse Windows XP from Mac Finder when name disappears from finder

  - by Chris

  Occasionally, like right at this moment, I cannot access my windows share from my mac. Normally, it works, but every now and then, the computer name won't be displayed under SHARED in Finder. Rebooting the windows computer usually fixes this, but it's inconvenient. The Windows computer can see the Mac on the network. Is there a method of asking finder to poll for windows shares again, or "forcing" finder to look for "desktop"? I'm looking for the equivalent of \desktop in the address bar of a Windows computer. Thanks for the help.

  Read the article

• Windows 8 - IE 10 Metro - How to print or save a webpage

  - by AbhishekGirish

  I'm running Windows 8 Pro. My default browser is Internet Explorer 10 (and hence opens as a Modern Windows 8 app). I want to know how to print or save a webpage. There are no related settings available in the browser. The only option is to select "View on Desktop" and the browser interface familiar to IE 9 opens up on the desktop, through which I could access the above said options and additional settings. I know the Desktop is not going away anytime soon and that its still an important part of Windows. But if Microsoft is pitching for the Modern Windows UI, why would they leave out important options such as print & save from it and force a user to access the "old" Desktop mode for the same? Even Windows 8 RT supports plug-and-play access to Printers & Peripherals. So not being able to Print from a tablet or access the File System is definitely not an answer.

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• CloudFormation - How to start a Windows Service with cfn-init

  - by Edwin

  I'm creating a CloudFormation Stack that will install and start a service on a Windows Instance. I've figured out how to install the service, but how do I start the service using cfn-init? The examples seem to all use linux, as there is a reference to "sysvinit" How do I structure AWS::CloudFormation::Init so that cfn-init will start windows services after installing them? Do I leave in the sysvinit, replace it with something else, take it out? ps: I'm referring to how to start services by providing information to AWS::CloudFormation::Init.services. Also, It would be nice to know how "packages" work for windows. AWS's announcemnet says that packages are supported on Windows but there is no Windows specific documentation

  Read the article

• Linux or Windows for a server?

  - by Matt

  I'm a Linux guy when it comes to (web) servers for the following reasons Legally free Fast software updates (Unless you're running Cent OS :) Powerful CLI management of services Easy to secure (in terms of users and groups) Web server software is, well, built for Linux... Apache, PHP, Python, etc, are Linux programs that get ported to Windows - I'm 90% sure of this Unless the web server needed to run ASP, I wouldn't use Windows. My boss' IT friend is a Windows guy, though. He recently got a server setup in the office to run Microsoft Exchange and some other shit. What I'm asking is, if he wanted to start running websites on this thing, what would be good reasoning to convince him otherwise? He's not very bright in terms of IT and the IT friend is all Windows. So it's two against one here... What would you say to running a Windows web server?

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >