Search Results

Search found 1270 results on 51 pages for 'amd'.

Page 16/51 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How to setup ATI Mobility Radeon HD 4650?

    - by Thi An
    I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

    Read the article

  • Virtualbox will run from 32bit installation CD but not 64bit.

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • Installed UBUNTU12.04 in Legacy, when changed to UEFI just runs the Terminal, not GUI

    - by jraulvc
    Well, I installed Ubuntu 12.04 in a Gateway NE 522 with Windows 8. First, I had to install it in Legacy mode, because in UEFI it would not run the bootable USB. In the Legacy mode it runs perfect. Once done that with help of the "Boot-Repair" I changed it to the UEFI and disabled the secure boot mode. GRUB runs fine but when I run ubuntu I get the following message: microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin kvm: disabled by bios kvm: disabled by bios kvm: disabled by bios and then I just get access to the terminal. From there, I have already tried with reinstalling unity and gmd. When I try to install amd64-microcode the same error ocurrs ( microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin ) by the "updating the microcode on all online processors..." phase of the installation. Can somebody tell me how can I recover the graphical interphase of ubuntu from the terminal? Thanks a lot

    Read the article

  • Problems after installing Ubuntu 11.10

    - by Andrew Orr
    I'm having trouble with Ubuntu 11.10. It has to do with nomodeset. After I boot into Ubuntu, it goes to a purple screen for about 10 seconds and then goes blank. After that nothing happens. I've read other people's questions about this and I know it has to do with enabling nomodeset. This worked for me when I was using the LiveCD mode, but now Ubuntu is permanently installed as a dual-boot system. Going into recovery mode doesn't work, pressing "e" in the boot loader and writing nomodeset after quiet splash doesn't work either. Holding shift any time it's booting doesn't work. I don't know what to do anymore. I have an HP Pavilion dv6 laptop with an AMD A6-3400M CPU, and my GPU is an AMD Radeon HD 6520G. I've never worked with Linux before so taking me through this step-by-step would be great. Thanks!

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • Error installing Windows7 64 bits on VirtualBox

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • ATI catalyst and additional drivers have vanishe d after update (8/9/2012)

    - by Obada Talal Abu Arisheh
    ok, I have my ATI Radeon 2400XT working properly for longtime on ubuntus (8.04 - 12.04) and recently when I was trying to update (it installs kernal 3.2.0-31 during that update) every think related to ATI including property drivers (that can be activated from additional drivers) are vanished so AMD catalyst control center is not working (it says no amd graphics card is installed) and when opening [additional drivers] it loads and then a box is appear saying (Downloading package indexes failed, please check your network status. Most drivers will not be available.) after searching for additional drivers the window appear saying (no property driver are used on this system). I don't know what happened really! I don't know how to fix this problem either. help!!

    Read the article

  • How to install Radeon Open Source Driver?

    - by Clintonio
    I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

    Read the article

  • Catalyst 12.1 for AGP card

    - by Brian
    I have a Radeon HD 4650 AGP card. The installation instructions at http://wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide download catalyst 12.1 However, there is no download available at http://support.amd.com/us/gpudownload/Pages/index.aspx for my AGP card. Only Windows drivers are available. Should I go ahead and use the guide and manually install 12.1? I assume it's not on the amd website for a reason, but I was wondering if anybody had any experience with this. Thanks!

    Read the article

  • Install AMDCONFIG on Ubuntu driver

    - by Nick Bailuc
    In 12.04 I used the official driver downloaded from amd.com which came with amdconfig but now in 14.04 the official driver is buggy so I just use the Ubuntu Official Drivers which works even better because they beefed up the original driver. The Ubuntu driver doesnt come with the terminal command amdconfig which allowed me to tweak/overclock my graphics card. How can I install it without having to install the original AMD driver? Additional Information: -I only use x.org drivers becuase it's opensource therefore more stable rather than the proprietary fglrx driver -I do not use procrams like amdoverdrivectrl or atioverclock because they are not as stable and advanced as the terminal command

    Read the article

  • Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

    - by Eriks Goodwin-Pfister
    I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Confused with X.ORG version number

    - by caligula
    There is my trouble: I'm trying to install ATI drivers on my Dell Vostro 3350 laptop. On the AMD's site I followed steps to determine which driver should I use. After selecting what hardware I use I got a link to download amd-driver-installer-12-3-x86.x86_64.run and below was a description of that driver that it was compatible with X.Org version from 6.7 to 7.6. And I do not know what version of X.Org my Ubuntu uses. Cause after googling I found that version is 7.6 in Ubuntu 11.10. But after typing: X -version I got the output: X.Org X Server 1.10.4 Release Date: 2011-08-19 X Protocol Version 11, Revision 0 So what is the exact version of X.Org in Ubuntu 11.10 and how should one reliably determine it? Can anyone construe? Thanks.

    Read the article

  • playing games in ubuntu 12.04

    - by tushar
    I recently got a lapyy from Delhi univesity...its actually free of cost lol! ...but d thing is i have to return it after a year or 2...btw its confo are--amd 5350m,7 gb ram,amd radeon x2 graphics but installed with ubuntu 12.04, hp probuk the thing is i want to play games on it i searched on the net there are a few softwares like wine,playon linux ,etc etc but i m not able to play with them....actually m new to linux ...may be that could b the reason...or so...i hv also got an advice to dual booting windows or so..but i dont want to break GRUB..as m not so proffesional in such things and if something went wrong then i wuld have to pay to the universsity....for any mishap !!!! please help m guys i m in great trouble...virtual box is aloso an handy application to run win appllication...haha,,but i dont knoe how to use it or so..plzzz help me or support me ...i will be highly obliged

    Read the article

  • Installing Ubuntu Server 11.04

    - by Jackson Walters
    Trying to install Ubuntu Server 11.04 on an 64-bit AMD machine. The install goes fine until after "Loading additional components", then I get a blank purple screen with a responsive cursor at the bottom. I've looked everywhere and can't find anything (all the documentation seems to be on the desktop version). I have a wireless card installed if that makes a difference, don't why it would. This happens regardless of whether nomodeset is set. Here's what it looks like (as described): Specs: CPU - 64-bit AMD Sempron 140 @ 2.7Ghz RAM - 1Gb DDR3 1333 HDD - WD 500Gb 7200RPM SATA 3.0Gb/s Mobo - Foxconn M61PMP-K Wireless Card - Rosewill RNX-G300LX

    Read the article

  • How to render Minecraft on the GPU?

    - by l0b0
    Hardware: Intel i7 AMD Radeon HD 6970 SSD with plenty of space 6 GB RAM Software OpenJDK 6, 7, and Oracle Java 7 (reproducible with all three) AMD Catalyst 12.8 and open source driver (reproducible with both) Ubuntu 12.04 x86_64 and older Minecraft 1.3.2 vanilla and older On this setup I am getting rubbish frame rates after a short while of playing, dropping from about 45-55 to 15 in a couple of minutes. CPU use is 40-45 even when rendering the opening screen at 1920x1280, and gameRenderer is using about 90% CPU when playing. Rather than trying to eke out a few more FPS out of an obviously broken rendering pipeline, I really hope to find a solution to make the GPU render Minecraft.

    Read the article

  • vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

    - by Ikalou
    I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

    Read the article

  • Can't start ubuntu 11.10, Stops at login screen!

    - by Martinpizza
    I have been trying to dual boot ubuntu with windows 7 via WUBI on my custom built pc but without success. When i start the computer i can choose windows or ubuntu i choose ubuntu and when i should get to the login screen the screen just stays purple/pink. Tried safe mode but cant get in there either. I have tried reinstall but did not work either. :( The second time i install ubuntu the screen was purple/pink and the screen was cut of so the left side was on the right side and right side on left side (hard to describe) Third time installing (The last time) it is just like the first time please help!!!! cant get nowhere without help i am kinda new at ubuntu and its creepy commands. Had ubuntu on my old computer. I think the problem is my hardware so here is my computer specs: Amd Fx 6100 Amd HIS Radeon HD 6950 ICEQ X Asus Sabertooth 990fx 1TB Harddrive I have no idea the name on it Please Help me!! Sorry for my bad English! :D

    Read the article

  • Install/Downgrade kernel to v3.5.5 on Ubuntu 13.04

    - by Villi Magg
    I've been looking around the internet for a solution to downgrade the kernel from 3.8 to 3.5.5 since I've got the AMD/Ati Radeon Mobility HD 5600 graphic card on my machine. This video card in unfortunately not supported by the 3.8 kernel. And then when I've downgraded the kernel I need to install a version 12.* of the AMD Catalyst driver. There is too much in stake to wipe out the current installation of the OS and install an older OS. So I would like to avoid doing that to the ends of the world. Hope someone can help me with this one? Kind regards! Villi Magg.

    Read the article

  • Ubuntu 12.04 freezing on startup

    - by Frank
    Have been looking everywhere to find a solution to this problem but have yet to find a solution. I am running 64 bit 12.04 LTS on a AMD C-50 Dual core 6 gigs ram AMD Ratheon HD 6250. The problem I am experiencing is when ubuntu gets to the wallpaper screen it will sometimes freeze soon after the the image appears or shortly there after gnome loads locking up keyboard and mouse. When I try to log in via the console the same thing happens (this is as ubuntu is loading). At the moment the system is set to auto login previously it was set to ask for password but it did the same thing. Switching to from lightdm to gdm did nothing to alleviate the issue. I have never had so many issues with ubuntu I have to say 12.04 is the most buggy version yet.

    Read the article

  • Why doesn't Unity 3D work on my HD3000 integrated graphics?

    - by Zatsugami
    So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

    Read the article

  • Missing launcher, top panel without icons, an ATI driver problem?

    - by jlotero
    After upgrading to Ubuntu 11.10, the following problems occurs when accesing in ubuntu mode (3D): the launcher is missing, top panel without icons on the right side, and I can only restart with Terminal (Alt-T and then sudo reboot). No problems in 2D. It occurs on my PC with AMD Athlon (tm) II X4 640 Processor, Radeon HD5670 and both with the 32-bit and 64 bits versions of Ubuntu. Both versions work well on an older PC with AMD Athlon 64 x2 Dual Core 4200 + processor, and an Nvidia integrated graphics card (C61 GeForce 6150SE nForce 430). Could it be a problem with the ATI driver?

    Read the article

  • Trouble with FGLRX in quantal x86_64

    - by Dii Leoo
    it's the third time i have to reinstall quantal because the fglrx is making me sick. I have an ATI Mobility Radeon HD 4250 (the code ir RS880).When i install Ati Driver, i don't have any problems, but when i reboot, the resolution is minimal and the launcher isn't visible, i can only use the things that are in desktop and use the terminal using CTRL+ALT+T. i've tried to make specific distribution page, downloading the legacy driver from AMD, and another thing: when i had 12.04 jockey told me that i could install some drivers, i had trouble, but that doesn't matter. now, the option to install drivers doesn't tell me about any drivers, i mean, its blank. At the moment i'm using the free drivers (Gallium 0.4 on AMD RS880M. is there any alternative ? or i'll have to live with the free drivers ? Thanks a lot ! I KNOW I HAVE TO INSTALL LEGACY DRIVERS, I'VE INSTALLED THEM, THEY DON'T WORK.

    Read the article

  • Computer crashing after a few minutes of logging in

    - by user88612
    I have a fresh install of 12.04.1 on my machine. It is constantly crashing after logging in. I noticed it crashed repeatedly when using Minitube and would crash in Chrome. It seems to be that anything graphics related is causing it? I've booted the system 7 times and each time it would crash within 5-10 minutes after logging in. I have no swap and it's a dual-boot system with Windows 7. My system specs: AMD Phenom XII 925 8GB DDR3 (new) AMD Radeon HD 7770 GPU (new) Seagate 1TB Barracuda HDD (new) Catalyst Drivers

    Read the article

  • CPU heating up too much and locking the notebook [12.10 32bits]

    - by Lucas Coutinho
    I have an AMD A6-3400m. When installing ubuntu 12.10 the CPU gets too hot. When I go to see the cpu usage not see anything unusual. I think she is working at or above the specifications of the cpu. I can not finish the installation because the notebook warms both the system disarms and the cooler is maximum. Do not know if it's just me but I never had a good experience using Linux on AMD. When I used Intel these problems did not happen. What is happening can? Ps: The laptop works perfectly in Windows 7 Home Premium 64. No crashes, no overheat, simply works.

    Read the article

  • Can't install ubuntu on msi computer

    - by Uruz36
    I have been trying to install ubuntu along windows but failed. the issue is that I get a graphical glitch with the colours of the ubuntu loading screen while installing from usb and no progress is made, the pc freezes. I've tryied the nomodeset solution, but when I have to reboot I get the same problem. I've tried ubuntu 13.10, 13.04, 12.04 etc...both generic and for amd: nothing worked... any idea how this could be resolved or which distribution/iso I should try for my system? thank you. I have the following system: AMD FX-4170 Quad-Core 4.20 Ghz ram 8 GB MSI mainboard 760GM-P21 (FX) 1TB hard disk samsung led tv as monitor (I connect with HDMI) OS windows 7 64bit ultimate

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >