Search Results

Search found 2898 results on 116 pages for 'sum of digits'.

Page 16/116 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • C++ BigInt multiplication conceptual problem

    - by Kapo
    I'm building a small BigInt library in C++ for use in my programming language. The structure is like the following: short digits[ 1000 ]; int len; I have a function that converts a string into a bigint by splitting it up into single chars and putting them into digits. The numbers in digits are all reversed, so the number 123 would look like the following: digits[0]=3 digits[1]=3 digits[2]=1 I have already managed to code the adding function, which works perfectly. It works somewhat like this: overflow = 0 for i ++ until length of both numbers exceeded: add numberA[ i ] to numberB[ i ] add overflow to the result set overflow to 0 if the result is bigger than 10: substract 10 from the result overflow = 1 put the result into numberReturn[ i ] (Overflow is in this case what happens when I add 1 to 9: Substract 10 from 10, add 1 to overflow, overflow gets added to the next digit) So think of how two numbers are stored, like those: 0 | 1 | 2 --------- A 2 - - B 0 0 1 The above represents the digits of the bigints 2 (A) and 100 (B). - means uninitialized digits, they aren't accessed. So adding the above number works fine: start at 0, add 2 + 0, go to 1, add 0, go to 2, add 1 But: When I want to do multiplication with the above structure, my program ends up doing the following: Start at 0, multiply 2 with 0 (eek), go to 1, ... So it is obvious that, for multiplication, I have to get an order like this: 0 | 1 | 2 --------- A - - 2 B 0 0 1 Then, everything would be clear: Start at 0, multiply 0 with 0, go to 1, multiply 0 with 0, go to 2, multiply 1 with 2 How can I manage to get digits into the correct form for multiplication? I don't want to do any array moving/flipping - I need performance!

    Read the article

  • How to get last 12 digits from a sting in MySQL?

    - by Nick Gorbikoff
    Hello. How would I get last 12 digits of a string using mysql? Let's say I have a varchar field with a tracking number, that may be anywhere from 5 to 20 varchars long. But I only need to select last 12 digits or less if there are less. so in a field = 12345678123456789012 I would only need to get what's in brackets field = 12345678[123456789012] I saw a few examples using mid, etc, but they dont' produce the desired result or I can't find an example that makes sense :-( Thank you.

    Read the article

  • How to get last 12 digits from a string in MySQL?

    - by Nick Gorbikoff
    Hello. How would I get last 12 digits of a string using mysql? Let's say I have a varchar field with a tracking number, that may be anywhere from 5 to 20 varchars long. But I only need to select last 12 digits or less if there are less. so in a field = 12345678123456789012 I would only need to get what's in brackets field = 12345678[123456789012] I saw a few examples using mid, etc, but they dont' produce the desired result or I can't find an example that makes sense :-( Thank you.

    Read the article

  • New datatype which can have numbers upto 100 digits.

    - by ckv
    Note: This was an interview question and may not have an actual use case currently The question was to design a class that can store numbers which are very very large say each number can have 100 digits. This new class is a datatype like int. What are the different types of constructors, overloads and other functions that you would write. How can this be further extended to support really large floating point numbers. How this can be given to others so that they can reuse the same component with their own additional functionality. My answer consisted of 2 approaches 1. using array of integers to store every say 10 digits 2. using string itself to store the number and perform operations on individual numbers. What would be the best approach?

    Read the article

  • Normal map lighting bug in bottom right quadrant

    - by Ryan Capote
    I am currently working on getting normal maps working in my project, and have run into a problem with lighting. As you can see, the normals in the bottom right quadrant of the lighting isn't calculating the correct direction to the light or something. Best seen by the red light If I use flat normals (z normal = 1.0), it seems to be working fine: normals for the tile sheet: Shader: #version 330 uniform sampler2D uDiffuseTexture; uniform sampler2D uNormalsTexture; uniform sampler2D uSpecularTexture; uniform sampler2D uEmissiveTexture; uniform sampler2D uWorldNormals; uniform sampler2D uShadowMap; uniform vec4 uLightColor; uniform float uConstAtten; uniform float uLinearAtten; uniform float uQuadradicAtten; uniform float uColorIntensity; in vec2 TexCoords; in vec2 GeomSize; out vec4 FragColor; float sample(vec2 coord, float r) { return step(r, texture2D(uShadowMap, coord).r); } float occluded() { float PI = 3.14; vec2 normalized = TexCoords.st * 2.0 - 1.0; float theta = atan(normalized.y, normalized.x); float r = length(normalized); float coord = (theta + PI) / (2.0 * PI); vec2 tc = vec2(coord, 0.0); float center = sample(tc, r); float sum = 0.0; float blur = (1.0 / GeomSize.x) * smoothstep(0.0, 1.0, r); sum += sample(vec2(tc.x - 4.0*blur, tc.y), r) * 0.05; sum += sample(vec2(tc.x - 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x - 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x - 1.0*blur, tc.y), r) * 0.15; sum += center * 0.16; sum += sample(vec2(tc.x + 1.0*blur, tc.y), r) * 0.15; sum += sample(vec2(tc.x + 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x + 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x + 4.0*blur, tc.y), r) * 0.05; return sum * smoothstep(1.0, 0.0, r); } float calcAttenuation(float distance) { float linearAtten = uLinearAtten * distance; float quadAtten = uQuadradicAtten * distance * distance; float attenuation = 1.0 / (uConstAtten + linearAtten + quadAtten); return attenuation; } vec3 calcFragPosition(void) { return vec3(TexCoords*GeomSize, 0.0); } vec3 calcLightPosition(void) { return vec3(GeomSize/2.0, 0.0); } float calcDistance(vec3 fragPos, vec3 lightPos) { return length(fragPos - lightPos); } vec3 calcLightDirection(vec3 fragPos, vec3 lightPos) { return normalize(lightPos - fragPos); } vec4 calcFinalLight(vec2 worldUV, vec3 lightDir, float attenuation) { float diffuseFactor = dot(normalize(texture2D(uNormalsTexture, worldUV).rgb), lightDir); vec4 diffuse = vec4(0.0); vec4 lightColor = uLightColor * uColorIntensity; if(diffuseFactor > 0.0) { diffuse = vec4(texture2D(uDiffuseTexture, worldUV.xy).rgb, 1.0); diffuse *= diffuseFactor; lightColor *= diffuseFactor; } else { discard; } vec4 final = (diffuse + lightColor); if(texture2D(uWorldNormals, worldUV).g > 0.0) { return final * attenuation; } else { return final * occluded(); } } void main(void) { vec3 fragPosition = calcFragPosition(); vec3 lightPosition = calcLightPosition(); float distance = calcDistance(fragPosition, lightPosition); float attenuation = calcAttenuation(distance); vec2 worldPos = gl_FragCoord.xy / vec2(1024, 768); vec3 lightDir = calcLightDirection(fragPosition, lightPosition); lightDir = (lightDir*0.5)+0.5; float atten = calcAttenuation(distance); vec4 emissive = texture2D(uEmissiveTexture, worldPos); FragColor = calcFinalLight(worldPos, lightDir, atten) + emissive; }

    Read the article

  • Why do digits in bash script names screw up path lookups?

    - by cannikin
    I've got a simple script that lists a bunch of EC2 servers and automates me connecting to them. This script lives at ~/bin/ec2 My PATH looks something like: /Users/rob/bin:/Users/rob:/usr/local/bin:/usr/local/sbin:/opt/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin Whenever I call ec2 I get: -bash: /Users/rob/ec2: No such file or directory Unless I give it the full path, then it'll work. If I rename the script to just ec then I can run it from anywhere like expected. Have digits in script names always been a problem like this? I'm on Mac OSX.

    Read the article

  • Improving SQL Code

    - by jeremib
    I'm using Pervasive SQL. I have the following UNION of mulitple SQL statements. Is there a way to clean this up, especially the Pay Date an the Loc No fields that are selected in each statement. Is there a way to pull this out and have only one place to need to change those two fields? ( SELECT '23400' as Gl_Number, y.Plan as Description, 0 as Hours, ROUND(SUM(Ee_Curr),2) as Debit, 0 as Credit FROM "PR_YLOC" y LEFT JOIN PR_SUMM s ON (s.Summ_No = y.Summ_No) WHERE y.Loc_No = 1041 AND s.Pay_Date = '2010-04-02' AND y.Code IN (100, 105, 110) AND y.Type = 3 GROUP BY y.Plan ) UNION ( SELECT '72000' as Gl_Number, y.Plan, 0, ROUND(SUM(Er_Curr),2), 0 FROM "PR_YLOC" y LEFT JOIN PR_SUMM s ON (s.Summ_No = y.Summ_No) WHERE y.Loc_No = 1041 AND s.Pay_Date = '2010-04-02' AND y.Code IN (100, 105, 110) AND y.Type = 3 GROUP BY y.Plan ) UNION ( SELECT '24800', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 100 GROUP BY c.Plan ) UNION ( SELECT '24800', c.Plan, 0, 0, ROUND(SUM(Ee_Amt),2) FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 115 GROUP BY c.Plan ) UNION ( SELECT '24150', c.Plan, 0, 0, ROUND(SUM(Ee_Amt),2) FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 241 GROUP BY c.Plan ) UNION ( SELECT '24150', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 239 GROUP BY c.Plan ) UNION ( SELECT '24120', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 230 GROUP BY c.Plan ) UNION ( SELECT '24100', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 225 GROUP BY c.Plan ) UNION ( SELECT '23800', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 245 GROUP BY c.Plan ) UNION ( select m.Def_Dept as Gl_Number, t.Short_Desc, (SELECT SUM(Hours) FROM pr_earn en WHERE en.Loc_No = e.Loc_No AND en.Emp_No = e.Emp_No AND en.Pay_Date = e.Pay_Date AND en.Pay_Code = e.Pay_Code) as Hours, (SELECT SUM(Pay_Amt) FROM pr_earn en WHERE en.Loc_No = e.Loc_No AND en.Emp_No = e.Emp_No AND en.Pay_Date = e.Pay_Date AND en.Pay_Code = e.Pay_Code) as Debit, 0 from pr_earn e left join pr_mast m on (e.Loc_No = m.Loc_No and e.Emp_No = m.Emp_No) left join pr_ptype t ON (t.Code = e.Pay_Code) where e.loc_no = 1041 and e.pay_date = '2010-04-02' group by m.Def_Dept, t.Short_Desc ) Thanks

    Read the article

  • Optimal two variable linear regression SQL statement (censoring outliers)

    - by Dave Jarvis
    Problem Am looking to apply the y = mx + b equation (where m is SLOPE, b is INTERCEPT) to a data set, which is retrieved as shown in the SQL code. The values from the (MySQL) query are: SLOPE = 0.0276653965651912 INTERCEPT = -57.2338357550468 SQL Code SELECT ((sum(t.YEAR) * sum(t.AMOUNT)) - (count(1) * sum(t.YEAR * t.AMOUNT))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as SLOPE, ((sum( t.YEAR ) * sum( t.YEAR * t.AMOUNT )) - (sum( t.AMOUNT ) * sum(power(t.YEAR, 2)))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as INTERCEPT FROM (SELECT D.AMOUNT, Y.YEAR FROM CITY C, STATION S, YEAR_REF Y, MONTH_REF M, DAILY D WHERE -- For a specific city ... -- C.ID = 8590 AND -- Find all the stations within a 15 unit radius ... -- SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) <15 AND -- Gather all known years for that station ... -- S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND -- The data before 1900 is shaky; insufficient after 2009. -- Y.YEAR BETWEEN 1900 AND 2009 AND -- Filtered by all known months ... -- M.YEAR_REF_ID = Y.ID AND -- Whittled down by category ... -- M.CATEGORY_ID = '001' AND -- Into the valid daily climate data. -- M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' GROUP BY Y.YEAR ORDER BY Y.YEAR ) t Data The data is visualized here (with five outliers highlighted): Questions How do I return the y value against all rows without repeating the same query to collect and collate the data? That is, how do I "reuse" the list of t values? How would you change the query to eliminate outliers (at an 85% confidence interval)? The following results (to calculate the start and end points of the line) appear incorrect. Why are the results off by ~10 degrees (e.g., outliers skewing the data)? (1900 * 0.0276653965651912) + (-57.2338357550468) = -4.66958228 (2009 * 0.0276653965651912) + (-57.2338357550468) = -1.65405406 I would have expected the 1900 result to be around 10 (not -4.67) and the 2009 result to be around 11.50 (not -1.65). Thank you!

    Read the article

  • Optimal two variable linear regression SQL statement

    - by Dave Jarvis
    Problem Am looking to apply the y = mx + b equation (where m is SLOPE, b is INTERCEPT) to a data set, which is retrieved as shown in the SQL code. The values from the (MySQL) query are: SLOPE = 0.0276653965651912 INTERCEPT = -57.2338357550468 SQL Code SELECT ((sum(t.YEAR) * sum(t.AMOUNT)) - (count(1) * sum(t.YEAR * t.AMOUNT))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as SLOPE, ((sum( t.YEAR ) * sum( t.YEAR * t.AMOUNT )) - (sum( t.AMOUNT ) * sum(power(t.YEAR, 2)))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as INTERCEPT FROM (SELECT D.AMOUNT, Y.YEAR FROM CITY C, STATION S, YEAR_REF Y, MONTH_REF M, DAILY D WHERE -- For a specific city ... -- C.ID = 8590 AND -- Find all the stations within a 5 unit radius ... -- SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) <15 AND -- Gather all known years for that station ... -- S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND -- The data before 1900 is shaky; and insufficient after 2009. -- Y.YEAR BETWEEN 1900 AND 2009 AND -- Filtered by all known months ... -- M.YEAR_REF_ID = Y.ID AND -- Whittled down by category ... -- M.CATEGORY_ID = '001' AND -- Into the valid daily climate data. -- M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' GROUP BY Y.YEAR ORDER BY Y.YEAR ) t Data The data is visualized here: Questions How do I return the y value against all rows without repeating the same query to collect and collate the data? That is, how do I "reuse" the list of t values? How would you change the query to eliminate outliers (at an 85% confidence interval)? The following results (to calculate the start and end points of the line) appear incorrect. Why are the results off by ~10 degrees (e.g., outliers skewing the data)? (1900 * 0.0276653965651912) + (-57.2338357550468) = -4.66958228 (2009 * 0.0276653965651912) + (-57.2338357550468) = -1.65405406 I would have expected the 1900 result to be around 10 (not -4.67) and the 2009 result to be around 11.50 (not -1.65). Thank you!

    Read the article

  • Optimal two variable linear regression calculation

    - by Dave Jarvis
    Problem Am looking to apply the y = mx + b equation (where m is SLOPE, b is INTERCEPT) to a data set, which is retrieved as shown in the SQL code. The values from the (MySQL) query are: SLOPE = 0.0276653965651912 INTERCEPT = -57.2338357550468 SQL Code SELECT ((sum(t.YEAR) * sum(t.AMOUNT)) - (count(1) * sum(t.YEAR * t.AMOUNT))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as SLOPE, ((sum( t.YEAR ) * sum( t.YEAR * t.AMOUNT )) - (sum( t.AMOUNT ) * sum(power(t.YEAR, 2)))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as INTERCEPT, FROM (SELECT D.AMOUNT, Y.YEAR FROM CITY C, STATION S, YEAR_REF Y, MONTH_REF M, DAILY D WHERE -- For a specific city ... -- C.ID = 8590 AND -- Find all the stations within a 15 unit radius ... -- SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) < 15 AND -- Gather all known years for that station ... -- S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND -- The data before 1900 is shaky; insufficient after 2009. -- Y.YEAR BETWEEN 1900 AND 2009 AND -- Filtered by all known months ... -- M.YEAR_REF_ID = Y.ID AND -- Whittled down by category ... -- M.CATEGORY_ID = '001' AND -- Into the valid daily climate data. -- M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' GROUP BY Y.YEAR ORDER BY Y.YEAR ) t Data The data is visualized here: Question The following results (to calculate the start and end points of the line) appear incorrect. Why are the results off by ~10 degrees (e.g., outliers skewing the data)? (1900 * 0.0276653965651912) + (-57.2338357550468) = -4.66958228 (2009 * 0.0276653965651912) + (-57.2338357550468) = -1.65405406 I would have expected the 1900 result to be around 10 (not -4.67) and the 2009 result to be around 11.50 (not -1.65). Related Sites Least absolute deviations Robust regression Thank you!

    Read the article

  • Remove redundant SQL code

    - by Dave Jarvis
    Code The following code calculates the slope and intercept for a linear regression against a slathering of data. It then applies the equation y = mx + b against the same result set to calculate the value of the regression line for each row. Can the two separate sub-selects be joined so that the data and its slope/intercept are calculated without executing the data gathering part of the query twice? SELECT AVG(D.AMOUNT) as AMOUNT, Y.YEAR * ymxb.SLOPE + ymxb.INTERCEPT as REGRESSION_LINE, Y.YEAR as YEAR, MAKEDATE(Y.YEAR,1) as AMOUNT_DATE FROM CITY C, STATION S, YEAR_REF Y, MONTH_REF M, DAILY D, (SELECT ((avg(t.AMOUNT * t.YEAR)) - avg(t.AMOUNT) * avg(t.YEAR)) / (stddev( t.AMOUNT ) * stddev( t.YEAR )) as CORRELATION, ((sum(t.YEAR) * sum(t.AMOUNT)) - (count(1) * sum(t.YEAR * t.AMOUNT))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as SLOPE, ((sum( t.YEAR ) * sum( t.YEAR * t.AMOUNT )) - (sum( t.AMOUNT ) * sum(power(t.YEAR, 2)))) / (power(sum(t.YEAR), 2) - count(1) * sum(power(t.YEAR, 2))) as INTERCEPT FROM ( SELECT AVG(D.AMOUNT) as AMOUNT, Y.YEAR as YEAR, MAKEDATE(Y.YEAR,1) as AMOUNT_DATE FROM CITY C, STATION S, YEAR_REF Y, MONTH_REF M, DAILY D WHERE $X{ IN, C.ID, CityCode } AND SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) < $P{Radius} AND S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND Y.YEAR BETWEEN 1900 AND 2009 AND M.YEAR_REF_ID = Y.ID AND M.CATEGORY_ID = $P{CategoryCode} AND M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' GROUP BY Y.YEAR ) t ) ymxb WHERE $X{ IN, C.ID, CityCode } AND SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) < $P{Radius} AND S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND Y.YEAR BETWEEN 1900 AND 2009 AND M.YEAR_REF_ID = Y.ID AND M.CATEGORY_ID = $P{CategoryCode} AND M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' GROUP BY Y.YEAR Question How do I execute the duplicate bits only once per query, instead of twice? The duplicate bit is the WHERE clause: $X{ IN, C.ID, CityCode } AND SQRT( POW( C.LATITUDE - S.LATITUDE, 2 ) + POW( C.LONGITUDE - S.LONGITUDE, 2 ) ) < $P{Radius} AND S.STATION_DISTRICT_ID = Y.STATION_DISTRICT_ID AND Y.YEAR BETWEEN 1900 AND 2009 AND M.YEAR_REF_ID = Y.ID AND M.CATEGORY_ID = $P{CategoryCode} AND M.ID = D.MONTH_REF_ID AND D.DAILY_FLAG_ID <> 'M' Related http://stackoverflow.com/questions/1595659/how-to-eliminate-duplicate-calculation-in-sql Thank you!

    Read the article

  • In Wireshark's Protocol Hierarchy Statistics screen, is the total byte count of a capture the sum of the Bytes column or just the top line (Frame)?

    - by Howiecamp
    Part 1 - I'm looking at Wireshark's Protocol Hierarchy Statistics screen (sample below), is the total byte count of the capture the sum of the Bytes column or just the top line (Frame)? I'm 99% that it's the latter because of protocol rollup but I wanted to conform. Part 2 - From Wireshark documentation on this screen, "Protocol layers can consist of packets that won't contain any higher layer protocol, so the sum of all higher layer packets may not sum up to the protocols packet count. Example: In the screenshot TCP has 85,83% but the sum of the subprotocols (HTTP, ...) is much less. This may be caused by TCP protocol overhead, e.g. TCP ACK packets won't be counted as packets of the higher layer)." Can you explain this?

    Read the article

  • C# Why can't I find Sum() of this HashSet. says "Arithmetic operation resulted in an overflow."

    - by user2332665
    I was trying to solve this problem projecteuler,problem125 this is my solution in python(just for understanding the logic) import math lim=10**8 found=set() for start in xrange(1,int(math.sqrt(lim))): sos = start*start for i in xrange(start+1,int(math.sqrt(lim))): sos += (i*i) if sos >= lim: break s=str(int(sos)) if s==s[::-1]: found.add(sos) print sum(found) the same code I wrote in C# is as follows using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication1 { class Program { public static bool isPalindrome(string s) { string temp = ""; for (int i=s.Length-1;i>=0;i-=1){temp+=s[i];} return (temp == s); } static void Main(string[] args) { int lim = Convert.ToInt32(Math.Pow(10,8)); var found = new HashSet<int>(); for (int start = 1; start < Math.Sqrt(lim); start += 1) { int s = start *start; for (int i = start + 1; start < Math.Sqrt(lim); i += 1) { s += i * i; if (s > lim) { break; } if (isPalindrome(s.ToString())) { found.Add(s); } } } Console.WriteLine(found.Sum()); } } } the code debugs fine until it gives an exception at Console.WriteLine(found.Sum()); (line31). Why can't I find Sum() of the set found

    Read the article

  • Why does async BeginReceiveFrom never time out on a raw socket?

    - by James Hugard
    Writing an asynchronous Ping using Raw Sockets in F#, to enable parallel requests using as few threads as possible. Not using "System.Net.NetworkInformation.Ping", because it appears to allocate one thread per request. Am also interested in using F# async workflows. The synchronous version below correctly times out when the target host does not exist/respond, but the asynchronous version hangs. Both work when the host does respond. Not sure if this is a .NET issue, or an F# one... Any ideas? (note: the process must run as Admin to allow Raw Socket access) This throws a timeout: let result = Ping.Ping ( IPAddress.Parse( "192.168.33.22" ), 1000 ) However, this hangs: let result = Ping.AsyncPing ( IPAddress.Parse( "192.168.33.22" ), 1000 ) |> Async.RunSynchronously Here's the code... module Ping open System open System.Net open System.Net.Sockets open System.Threading //---- ICMP Packet Classes type IcmpMessage (t : byte) = let mutable m_type = t let mutable m_code = 0uy let mutable m_checksum = 0us member this.Type with get() = m_type member this.Code with get() = m_code member this.Checksum = m_checksum abstract Bytes : byte array default this.Bytes with get() = [| m_type m_code byte(m_checksum) byte(m_checksum >>> 8) |] member this.GetChecksum() = let mutable sum = 0ul let bytes = this.Bytes let mutable i = 0 // Sum up uint16s while i < bytes.Length - 1 do sum <- sum + uint32(BitConverter.ToUInt16( bytes, i )) i <- i + 2 // Add in last byte, if an odd size buffer if i <> bytes.Length then sum <- sum + uint32(bytes.[i]) // Shuffle the bits sum <- (sum >>> 16) + (sum &&& 0xFFFFul) sum <- sum + (sum >>> 16) sum <- ~~~sum uint16(sum) member this.UpdateChecksum() = m_checksum <- this.GetChecksum() type InformationMessage (t : byte) = inherit IcmpMessage(t) let mutable m_identifier = 0us let mutable m_sequenceNumber = 0us member this.Identifier = m_identifier member this.SequenceNumber = m_sequenceNumber override this.Bytes with get() = Array.append (base.Bytes) [| byte(m_identifier) byte(m_identifier >>> 8) byte(m_sequenceNumber) byte(m_sequenceNumber >>> 8) |] type EchoMessage() = inherit InformationMessage( 8uy ) let mutable m_data = Array.create 32 32uy do base.UpdateChecksum() member this.Data with get() = m_data and set(d) = m_data <- d this.UpdateChecksum() override this.Bytes with get() = Array.append (base.Bytes) (this.Data) //---- Synchronous Ping let Ping (host : IPAddress, timeout : int ) = let mutable ep = new IPEndPoint( host, 0 ) let socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let mutable buffer = packet.Bytes try if socket.SendTo( buffer, ep ) <= 0 then raise (SocketException()) buffer <- Array.create (buffer.Length + 20) 0uy let mutable epr = ep :> EndPoint if socket.ReceiveFrom( buffer, &epr ) <= 0 then raise (SocketException()) finally socket.Close() buffer //---- Entensions to the F# Async class to allow up to 5 paramters (not just 3) type Async with static member FromBeginEnd(arg1,arg2,arg3,arg4,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,iar,state)), endAction, ?cancelAction=cancelAction) static member FromBeginEnd(arg1,arg2,arg3,arg4,arg5,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,arg5,iar,state)), endAction, ?cancelAction=cancelAction) //---- Extensions to the Socket class to provide async SendTo and ReceiveFrom type System.Net.Sockets.Socket with member this.AsyncSendTo( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginSendTo, this.EndSendTo ) member this.AsyncReceiveFrom( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginReceiveFrom, (fun asyncResult -> this.EndReceiveFrom(asyncResult, remoteEP) ) ) //---- Asynchronous Ping let AsyncPing (host : IPAddress, timeout : int ) = async { let ep = IPEndPoint( host, 0 ) use socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let outbuffer = packet.Bytes try let! result = socket.AsyncSendTo( outbuffer, 0, outbuffer.Length, SocketFlags.None, ep ) if result <= 0 then raise (SocketException()) let epr = ref (ep :> EndPoint) let inbuffer = Array.create (outbuffer.Length + 256) 0uy let! result = socket.AsyncReceiveFrom( inbuffer, 0, inbuffer.Length, SocketFlags.None, epr ) if result <= 0 then raise (SocketException()) return inbuffer finally socket.Close() }

    Read the article

  • How to detect a timeout when using asynchronous Socket.BeginReceive?

    - by James Hugard
    Writing an asynchronous Ping using Raw Sockets in F#, to enable parallel requests using as few threads as possible. Not using "System.Net.NetworkInformation.Ping", because it appears to allocate one thread per request. Am also interested in using F# async workflows. The synchronous version below correctly times out when the target host does not exist/respond, but the asynchronous version hangs. Both work when the host does respond. Not sure if this is a .NET issue, or an F# one... Any ideas? (note: the process must run as Admin to allow Raw Socket access) This throws a timeout: let result = Ping.Ping ( IPAddress.Parse( "192.168.33.22" ), 1000 ) However, this hangs: let result = Ping.AsyncPing ( IPAddress.Parse( "192.168.33.22" ), 1000 ) |> Async.RunSynchronously Here's the code... module Ping open System open System.Net open System.Net.Sockets open System.Threading //---- ICMP Packet Classes type IcmpMessage (t : byte) = let mutable m_type = t let mutable m_code = 0uy let mutable m_checksum = 0us member this.Type with get() = m_type member this.Code with get() = m_code member this.Checksum = m_checksum abstract Bytes : byte array default this.Bytes with get() = [| m_type m_code byte(m_checksum) byte(m_checksum >>> 8) |] member this.GetChecksum() = let mutable sum = 0ul let bytes = this.Bytes let mutable i = 0 // Sum up uint16s while i < bytes.Length - 1 do sum <- sum + uint32(BitConverter.ToUInt16( bytes, i )) i <- i + 2 // Add in last byte, if an odd size buffer if i <> bytes.Length then sum <- sum + uint32(bytes.[i]) // Shuffle the bits sum <- (sum >>> 16) + (sum &&& 0xFFFFul) sum <- sum + (sum >>> 16) sum <- ~~~sum uint16(sum) member this.UpdateChecksum() = m_checksum <- this.GetChecksum() type InformationMessage (t : byte) = inherit IcmpMessage(t) let mutable m_identifier = 0us let mutable m_sequenceNumber = 0us member this.Identifier = m_identifier member this.SequenceNumber = m_sequenceNumber override this.Bytes with get() = Array.append (base.Bytes) [| byte(m_identifier) byte(m_identifier >>> 8) byte(m_sequenceNumber) byte(m_sequenceNumber >>> 8) |] type EchoMessage() = inherit InformationMessage( 8uy ) let mutable m_data = Array.create 32 32uy do base.UpdateChecksum() member this.Data with get() = m_data and set(d) = m_data <- d this.UpdateChecksum() override this.Bytes with get() = Array.append (base.Bytes) (this.Data) //---- Synchronous Ping let Ping (host : IPAddress, timeout : int ) = let mutable ep = new IPEndPoint( host, 0 ) let socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let mutable buffer = packet.Bytes try if socket.SendTo( buffer, ep ) <= 0 then raise (SocketException()) buffer <- Array.create (buffer.Length + 20) 0uy let mutable epr = ep :> EndPoint if socket.ReceiveFrom( buffer, &epr ) <= 0 then raise (SocketException()) finally socket.Close() buffer //---- Entensions to the F# Async class to allow up to 5 paramters (not just 3) type Async with static member FromBeginEnd(arg1,arg2,arg3,arg4,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,iar,state)), endAction, ?cancelAction=cancelAction) static member FromBeginEnd(arg1,arg2,arg3,arg4,arg5,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,arg5,iar,state)), endAction, ?cancelAction=cancelAction) //---- Extensions to the Socket class to provide async SendTo and ReceiveFrom type System.Net.Sockets.Socket with member this.AsyncSendTo( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginSendTo, this.EndSendTo ) member this.AsyncReceiveFrom( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginReceiveFrom, (fun asyncResult -> this.EndReceiveFrom(asyncResult, remoteEP) ) ) //---- Asynchronous Ping let AsyncPing (host : IPAddress, timeout : int ) = async { let ep = IPEndPoint( host, 0 ) use socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let outbuffer = packet.Bytes try let! result = socket.AsyncSendTo( outbuffer, 0, outbuffer.Length, SocketFlags.None, ep ) if result <= 0 then raise (SocketException()) let epr = ref (ep :> EndPoint) let inbuffer = Array.create (outbuffer.Length + 256) 0uy let! result = socket.AsyncReceiveFrom( inbuffer, 0, inbuffer.Length, SocketFlags.None, epr ) if result <= 0 then raise (SocketException()) return inbuffer finally socket.Close() }

    Read the article

  • Why does BeginReceiveFrom never time out?

    - by James Hugard
    I am writing an asynchronous Ping using Raw Sockets in F#, to enable parallel requests using as few threads as possible ("System.Net.NetworkInformation.Ping" appears to use one thread per request, but have not tested this... also am interested in using F# async workflows). The synchronous version below correctly times out when the target host does not exist/respond, but the asynchronous version hangs. Both work when the host does respond... Any ideas? (note: the process must run as Admin for this code to work) This throws a timeout: let result = Ping.Ping ( IPAddress.Parse( "192.168.33.22" ), 1000 ) However, this hangs: let result = Ping.PingAsync ( IPAddress.Parse( "192.168.33.22" ), 1000 ) |> Async.RunSynchronously Here's the code... module Ping open System open System.Net open System.Net.Sockets open System.Threading //---- ICMP Packet Classes type IcmpMessage (t : byte) = let mutable m_type = t let mutable m_code = 0uy let mutable m_checksum = 0us member this.Type with get() = m_type member this.Code with get() = m_code member this.Checksum = m_checksum abstract Bytes : byte array default this.Bytes with get() = [| m_type m_code byte(m_checksum) byte(m_checksum >>> 8) |] member this.GetChecksum() = let mutable sum = 0ul let bytes = this.Bytes let mutable i = 0 // Sum up uint16s while i < bytes.Length - 1 do sum <- sum + uint32(BitConverter.ToUInt16( bytes, i )) i <- i + 2 // Add in last byte, if an odd size buffer if i <> bytes.Length then sum <- sum + uint32(bytes.[i]) // Shuffle the bits sum <- (sum >>> 16) + (sum &&& 0xFFFFul) sum <- sum + (sum >>> 16) sum <- ~~~sum uint16(sum) member this.UpdateChecksum() = m_checksum <- this.GetChecksum() type InformationMessage (t : byte) = inherit IcmpMessage(t) let mutable m_identifier = 0us let mutable m_sequenceNumber = 0us member this.Identifier = m_identifier member this.SequenceNumber = m_sequenceNumber override this.Bytes with get() = Array.append (base.Bytes) [| byte(m_identifier) byte(m_identifier >>> 8) byte(m_sequenceNumber) byte(m_sequenceNumber >>> 8) |] type EchoMessage() = inherit InformationMessage( 8uy ) let mutable m_data = Array.create 32 32uy do base.UpdateChecksum() member this.Data with get() = m_data and set(d) = m_data <- d this.UpdateChecksum() override this.Bytes with get() = Array.append (base.Bytes) (this.Data) //---- Synchronous Ping let Ping (host : IPAddress, timeout : int ) = let mutable ep = new IPEndPoint( host, 0 ) let socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let mutable buffer = packet.Bytes try if socket.SendTo( buffer, ep ) <= 0 then raise (SocketException()) buffer <- Array.create (buffer.Length + 20) 0uy let mutable epr = ep :> EndPoint if socket.ReceiveFrom( buffer, &epr ) <= 0 then raise (SocketException()) finally socket.Close() buffer //---- Entensions to the F# Async class to allow up to 5 paramters (not just 3) type Async with static member FromBeginEnd(arg1,arg2,arg3,arg4,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,iar,state)), endAction, ?cancelAction=cancelAction) static member FromBeginEnd(arg1,arg2,arg3,arg4,arg5,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,arg5,iar,state)), endAction, ?cancelAction=cancelAction) //---- Extensions to the Socket class to provide async SendTo and ReceiveFrom type System.Net.Sockets.Socket with member this.AsyncSendTo( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginSendTo, this.EndSendTo ) member this.AsyncReceiveFrom( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginReceiveFrom, (fun asyncResult -> this.EndReceiveFrom(asyncResult, remoteEP) ) ) //---- Asynchronous Ping let PingAsync (host : IPAddress, timeout : int ) = async { let ep = IPEndPoint( host, 0 ) use socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let outbuffer = packet.Bytes try let! result = socket.AsyncSendTo( outbuffer, 0, outbuffer.Length, SocketFlags.None, ep ) if result <= 0 then raise (SocketException()) let epr = ref (ep :> EndPoint) let inbuffer = Array.create (outbuffer.Length + 256) 0uy let! result = socket.AsyncReceiveFrom( inbuffer, 0, inbuffer.Length, SocketFlags.None, epr ) if result <= 0 then raise (SocketException()) return inbuffer finally socket.Close() }

    Read the article

  • How can I place zeroes to the left of a given number to a maximum of 6 digits including the given nu

    - by Sergio Tapia
    I have this method that receives an ID number and downloads an HTML website according to that ID. Typically, an IMDB link is like this: http://www.imdb.com/title/tt0892791/ http://www.imdb.com/title/tt1226229/ http://www.imdb.com/title/tt0000429/ They all follow the 'tt' then 7 digits, with lack of digits turning into zeroes to fill out the left spaces. How can I accomplish this using C#? I'm kind of stumped. Here's my method: /// <summary> /// Find a movie page using its precise IMDB id. /// </summary> /// <param name="id">IMDB Movie ID</param> /// <returns>Returns an HtmlDocument with the source code included.</returns> public HtmlDocument ByID(string id) { string url = String.Format("http://www.imdb.com/title/tt{0}/", id); HtmlDocument page = downloader.Load(url); return page; } Thank you very much for your time, and if you are interested in helping out, you can check out the complete source code of TheFreeIMDB here: http://thefreeimdb.codeplex.com/

    Read the article

  • How to calculate the sum of a column in an MS Access table for a given date (a single day, month or year)

    - by cMinor
    I have a table in Access in a custom format saved as dd/MM/yyyy hh:mm:ss tt , Also A form in VB.NET 2010, I get a specific day, month and year with no problem but the problem comes when I want to query the sum of a column named value depending on a specific month or day or year.... The table is like: +-----+-----------+-------------------------+ | id | value | date | +-----+-----------+-------------------------+ | id1 | 1499 | 01/01/2012 07:30:11 p.m.| | id2 | 1509 | 11/02/2012 07:30:11 p.m.| | id3 | 1611 | 21/10/2012 07:30:11 p.m.| | id1 | 1115 | 11/10/2012 07:30:11 p.m.| | id1 | 1499 | 17/05/2012 07:30:11 p.m.| | id2 | 1709 | 11/06/2012 07:30:11 p.m.| | id3 | 1911 | 30/07/2012 07:30:11 p.m.| | id1 | 1015 | 01/08/2012 07:30:11 p.m.| | id1 | 1000 | 11/05/2012 07:30:11 p.m.| |+-----+-----------+------------------------+ So I Know the query SELECT SUM(value) FROM mytable WHERE date in='01/05/2012 00:00:00' ... How to tell the query I want the month of May so I would get 1499+1000= 2499 Or how to tell I want the year 2012 so I would get the sum of all the table Which would be the correct syntax...

    Read the article

  • SQL Server 2003: how can I assign a name to the SUM column ?

    - by Patrick
    hi, how can I assign a column name to the SUM column ? i.e. select OwnerUserId, SUM(PostScore) INTO Experts from ... I get this error: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. I guess because the column containing the results of SUM has not name. thanks

    Read the article

  • Not allow more than 5 digits after decimal. in on javascript "OnKeyUp"?

    - by James123
    I have a javascript code for textbox that will put commas on in digits like (11,23,233) mTextbox.Attributes.Add("OnKeyUp", "javascript:this.value=Comma(this.value);") function Comma(Num) { Num += ''; Num = Num.replace(',', ''); Num = Num.replace(',', ''); Num = Num.replace(',', ''); Num = Num.replace(',', ''); Num = Num.replace(',', ''); Num = Num.replace(',', ''); x = Num.split('.'); x1 = x[0]; x2 = x.length > 1 ? '.' + x[1] : ''; var rgx = /(\d+)(\d{3})/; while (rgx.test(x1)) x1 = x1.replace(rgx, '$1' + ',' + '$2'); return x1 + x2; } Now same here I need to restrict user to enter not morethan 5 digits after decimal (ex: Allow: 12,23,221.34323 Not Allow: 12,23,232.232423 I can change above javascript to work that?

    Read the article

  • Can anyone help me with a complex sum, 3 table join mysql query?

    - by Scarface
    Hey guys I have a query and it works fine, but I want to add another table to the mix. The invite table I want to add has two fields: username and user_invite. Much like this site, I am using a point system to encourage diligent users. The current query which is displayed below adds the up votes and down votes based on the user in question: $creator. I want to count the number of entries for that same user from the invite table, and add 50 for each row it finds to the current output/sum of my query. Is this possible with one query, or do I need two? "SELECT *, SUM(IF(points_id = \"1\", 1,0))-SUM(IF(points_id = \"2\", 1,0)) AS 'total' FROM points LEFT JOIN post ON post.post_id=points.points_id WHERE post.creator='$creator'"

    Read the article

  • How to write sum calculation based on ria service?

    - by KentZhou
    When using ria service for SL app, I can issue following async call to get a group of entity list. LoadOperation<Person> ch = this.AMSContext.Load(this.AMSContext.GetPersonQuery().Where(a => a.PersonID == this.performer.PersonID)); But I want to get some calculation, for example, sum(Commission), sum(Salary), the result is not entity, just a scalar value. How can I do this?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >