Search Results

Search found 8776 results on 352 pages for 'boolean logic'.

Page 160/352 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • How to get two seperate remote domain controllers with same IP to work?

    - by Mr. Mister
    Hi, I have a VPN setup between multiple locations. Between each location and the central point (me), is a trust between our domain controllers. It all works great.. A new location wants to join, but their AD controller is using an IP address that is already in use by another AD in a separate location. Neither locations can change their IP addresses, but apparently there is a NAT rule that could be used to allow communication between each AD controller? The central site has a Cisco 5510 firewall which could perform the NAT, but I am unsure of the logic behind the NAT rule. Is anyone able to explain or help out? Thanks.

    Read the article

  • Can I make ssh tell me which control file it would use for multiplexing?

    - by Ryan Thompson
    I am using the following options in my ~/.ssh/config in order to enable connection multiplexing: ControlMaster auto ControlPath ~/.ssh/control/master-%r@%h:%p However, this has the annoying problem that the first shell to connect to a particular server must be the last to disconnect, because it is the master connection that all the other connections are using. So if you log out of the master, it appears to just hang. To solve this, I would like to wrap ssh with a script that checks if the control master file exists, and if not, starts a master ssh process in the background. Then it would start a slave ssh session. In order to accomplish this, my script would have to determine the path to the control file that ssh would use. This would entail parsing the ssh command line options and config files and implementing the logic for determining the ControlPath. Is there any way to just ask ssh what path it would use, so I can check it?

    Read the article

  • Android SQLlite crashes after trying retrieving data from it

    - by Pavel
    Hey everyone. I'm kinda new to android programming so please bear with me. I'm having some problems with retrieving records from the db. Basically, all I want to do is to store latitudes and longitudes which GPS positioning functions outputs and display them in a list using ListActivity on different tab later on. This is how the code for my DBAdapter helper class looks like: public class DBAdapter { public static final String KEY_ROWID = "_id"; public static final String KEY_LATITUDE = "latitude"; public static final String KEY_LONGITUDE = "longitude"; private static final String TAG = "DBAdapter"; private static final String DATABASE_NAME = "coords"; private static final String DATABASE_TABLE = "coordsStorage"; private static final int DATABASE_VERSION = 1; private static final String DATABASE_CREATE = "create table coordsStorage (_id integer primary key autoincrement, " + "latitude integer not null, longitude integer not null);"; private final Context context; private DatabaseHelper DBHelper; private SQLiteDatabase db; public DBAdapter(Context ctx) { this.context = ctx; DBHelper = new DatabaseHelper(context); } private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } @Override public void onCreate(SQLiteDatabase db) { db.execSQL(DATABASE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(TAG, "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS titles"); onCreate(db); } } //---opens the database--- public DBAdapter open() throws SQLException { db = DBHelper.getWritableDatabase(); return this; } //---closes the database--- public void close() { DBHelper.close(); } //---insert a title into the database--- public long insertCoords(int latitude, int longitude) { ContentValues initialValues = new ContentValues(); initialValues.put(KEY_LATITUDE, latitude); initialValues.put(KEY_LONGITUDE, longitude); return db.insert(DATABASE_TABLE, null, initialValues); } //---deletes a particular title--- public boolean deleteTitle(long rowId) { return db.delete(DATABASE_TABLE, KEY_ROWID + "=" + rowId, null) 0; } //---retrieves all the titles--- public Cursor getAllTitles() { return db.query(DATABASE_TABLE, new String[] { KEY_ROWID, KEY_LATITUDE, KEY_LONGITUDE}, null, null, null, null, null); } //---retrieves a particular title--- public Cursor getTitle(long rowId) throws SQLException { Cursor mCursor = db.query(true, DATABASE_TABLE, new String[] { KEY_ROWID, KEY_LATITUDE, KEY_LONGITUDE}, KEY_ROWID + "=" + rowId, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } //---updates a title--- /*public boolean updateTitle(long rowId, int latitude, int longitude) { ContentValues args = new ContentValues(); args.put(KEY_LATITUDE, latitude); args.put(KEY_LONGITUDE, longitude); return db.update(DATABASE_TABLE, args, KEY_ROWID + "=" + rowId, null) 0; }*/ } Now my question is - am I doing something wrong here? If yes could someone please tell me what? And how I should retrieve the records in organised list manner? Help would be greatly appreciated!!

    Read the article

  • Ladder-like word game in Java

    - by sasquatch90
    I've found this question http://stackoverflow.com/questions/2844190/choosing-design-method-for-ladder-like-word-game and I would also like to do this kind of program. I've written some code but already have two issues. Here's what I already have : GRID : public class Grid { public Grid(){} public Grid( Element e ){} } ELEMENT : public class Element { final int INVISIBLE = 0; final int EMPTY = 1; final int FIRST_LETTER = 2; final int OTHER_LETTER = 3; private int state; private String letter; public Element(){} //empty block public Element(int state){ this("", 0); } //filled block public Element(String s, int state){ this.state = state; this.letter = s; } public static void changeState(int s){ } public int getState(){ return state; } public boolean equalLength(){ return true; } public boolean equalValue(){ return true; } @Override public String toString(){ return "["+letter+"]"; } } MAIN: import java.util.Scanner; public class Main { public static void main(String[] args){ Scanner sc = new Scanner(System.in); System.out.println("Height: "); while (!sc.hasNextInt()) { System.out.println("int, please!"); sc.next(); } final int height = sc.nextInt(); Grid[] game = new Grid[height]; for(int i = 1; i <= height; i++) { String s; do { System.out.println("Length " + i + ", please!"); s = sc.next(); } while (s.length() != i); Element[] line = new Element[s.length()+1]; Element single = null; String[] temp = null; //issue here temp = s.split(""); System.out.println("s.length: "+s.length()); System.out.println("temp.length: "+temp.length); // for(String str : temp){ System.out.println("str:"+str); } for (int k = 0 ; k < temp.length ; k++) { if( k == 0 ){ single = new Element(temp[k], 2); System.out.println("single1: "+single); } else{ single = new Element(temp[k], 3); System.out.println("single2: "+single); } line[k] = single; } for (Element l : line) { System.out.println("line:"+l); } //issue here game[i] = line; } // for (Grid g : game) { System.out.println(g); } } } And sample output for debug : Height: 3 Length 1, please! A s.length: 1 temp.length: 2 str: str:A single1: [] single2: [A] line:[] line:[A] Here's what I think it should work like. I grab a word from user. Next create Grid element for whole game. Then for each line I create Element[] array called line. I split the given text and here's the first problem. Why string.split() adds a whitespace ? You can see clearly in output that it is added for no reason. How can I get rid of it (now I had to add +1 to the length of line just to run the code). Continuing I'm throwing the splitted text into temporary String array and next from each letter I create Element object and throw it to line array. Apart of this empty space output looks fine. But next problem is with Grid. I've created constructor taking Element as an argument, but still I can't throw line as Grid[] elements because of 'incompatible types'. How can I fix that ? Am I even doing it right ? Maybe I should get rid of line as Element[] and just create Grid[][] ?

    Read the article

  • Get the touch position inside the imageview in android

    - by Manikandan
    I have a imageview in my activity and I am able to get the position where the user touch the imageview, through onTouchListener. I placed another image where the user touch over that image. I need to store the touch position(x,y), and use it in another activity, to show the tags. I stored the touch position in the first activity. In the first activity, my imageview at the top of the screen. In the second activity its at the bottom of the screen. If I use the position stored from the first acitvity, it place the tag image at the top, not on the imageview, where I previously clicked in the first activity. Is there anyway to get the position inside the imageview. FirstActivity: cp.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(View v, MotionEvent event) { // TODO Auto-generated method stub Log.v("touched x val of cap img >>", event.getX() + ""); Log.v("touched y val of cap img >>", event.getY() + ""); x = (int) event.getX(); y = (int) event.getY(); tag.setVisibility(View.VISIBLE); int[] viewCoords = new int[2]; cp.getLocationOnScreen(viewCoords); int imageX = x - viewCoords[0]; // viewCoods[0] is the X coordinate int imageY = y - viewCoords[1]; // viewCoods[1] is the y coordinate Log.v("Real x >>>",imageX+""); Log.v("Real y >>>",imageY+""); RelativeLayout rl = (RelativeLayout) findViewById(R.id.lay_lin); ImageView iv = new ImageView(Capture_Image.this); Bitmap bm = BitmapFactory.decodeResource(getResources(), R.drawable.tag_icon_32); iv.setImageBitmap(bm); RelativeLayout.LayoutParams params = new RelativeLayout.LayoutParams( RelativeLayout.LayoutParams.WRAP_CONTENT, RelativeLayout.LayoutParams.WRAP_CONTENT); params.leftMargin = x; params.topMargin = y; rl.addView(iv, params); Intent intent= new Intent(Capture_Image.this,Tag_Image.class); Bundle b=new Bundle(); b.putInt("xval", imageX); b.putInt("yval", imageY); intent.putExtras(b); startActivity(intent); return false; } }); In TagImage.java I used the following: im = (ImageView) findViewById(R.id.img_cam22); b=getIntent().getExtras(); xx=b.getInt("xval"); yy=b.getInt("yval"); im.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(View v, MotionEvent event) { int[] viewCoords = new int[2]; im.getLocationOnScreen(viewCoords); int imageX = xx + viewCoords[0]; // viewCoods[0] is the X coordinate int imageY = yy+ viewCoords[1]; // viewCoods[1] is the y coordinate Log.v("Real x >>>",imageX+""); Log.v("Real y >>>",imageY+""); RelativeLayout rl = (RelativeLayout) findViewById(R.id.lay_lin); ImageView iv = new ImageView(Tag_Image.this); Bitmap bm = BitmapFactory.decodeResource(getResources(), R.drawable.tag_icon_32); iv.setImageBitmap(bm); RelativeLayout.LayoutParams params = new RelativeLayout.LayoutParams( 30, 40); params.leftMargin =imageX ; params.topMargin = imageY; rl.addView(iv, params); return true; } });

    Read the article

  • Unnecessary Java context switches

    - by Paul Morrison
    I have a network of Java Threads (Flow-Based Programming) communicating via fixed-capacity channels - running under WindowsXP. What we expected, based on our experience with "green" threads (non-preemptive), would be that threads would switch context less often (thus reducing CPU time) if the channels were made bigger. However, we found that increasing channel size does not make any difference to the run time. What seems to be happening is that Java decides to switch threads even though channels aren't full or empty (i.e. even though a thread doesn't have to suspend), which costs CPU time for no apparent advantage. Also changing Thread priorities doesn't make any observable difference. My question is whether there is some way of persuading Java not to make unnecessary context switches, but hold off switching until it is really necessary to switch threads - is there some way of changing Java's dispatching logic? Or is it reacting to something I didn't pay attention to?! Or are there other asynchronism mechanisms, e.g. Thread factories, Runnable(s), maybe even daemons (!). The answer appears to be non-obvious, as so far none of my correspondents has come up with an answer (including most recently two CS profs). Or maybe I'm missing something that's so obvious that people can't imagine my not knowing it... I've added the send and receive code here - not very elegant, but it seems to work...;-) In case you are wondering, I thought the goLock logic in 'send' might be causing the problem, but removing it temporarily didn't make any difference. I have added the code for send and receive... public synchronized Packet receive() { if (isDrained()) { return null; } while (isEmpty()) { try { wait(); } catch (InterruptedException e) { close(); return null; } if (isDrained()) { return null; } } if (isDrained()) { return null; } if (isFull()) { notifyAll(); // notify other components waiting to send } Packet packet = array[receivePtr]; array[receivePtr] = null; receivePtr = (receivePtr + 1) % array.length; //notifyAll(); // only needed if it was full usedSlots--; packet.setOwner(receiver); if (null == packet.getContent()) { traceFuncs("Received null packet"); } else { traceFuncs("Received: " + packet.toString()); } return packet; } synchronized boolean send(final Packet packet, final OutputPort op) { sender = op.sender; if (isClosed()) { return false; } while (isFull()) { try { wait(); } catch (InterruptedException e) { indicateOneSenderClosed(); return false; } sender = op.sender; } if (isClosed()) { return false; } try { receiver.goLock.lockInterruptibly(); } catch (InterruptedException ex) { return false; } try { packet.clearOwner(); array[sendPtr] = packet; sendPtr = (sendPtr + 1) % array.length; usedSlots++; // move this to here if (receiver.getStatus() == StatusValues.DORMANT || receiver.getStatus() == StatusValues.NOT_STARTED) { receiver.activate(); // start or wake up if necessary } else { notifyAll(); // notify receiver // other components waiting to send to this connection may also get // notified, // but this is handled by while statement } sender = null; Component.network.active = true; } finally { receiver.goLock.unlock(); } return true; }

    Read the article

  • Multi-threaded .NET application blocks during file I/O when protected by Themida

    - by Erik Jensen
    As the title says I have a .NET application that is the GUI which uses multiple threads to perform separate file I/O and notice that the threads occasionally block when the application is protected by Themida. One thread is devoted to reading from serial COM port and another thread is devoted to copying files. What I experience is occasionally when the file copy thread encounters a network delay, it will block the other thread that is reading from the serial port. In addition to slow network (which can be transient), I can cause the problem to happen more frequently by making a PathFileExists call to a bad path e.g. PathFileExists("\\\\BadPath\\file.txt"); The COM port reading function will block during the call to ReadFile. This only happens when the application is protected by Themida. I have tried under WinXP, Win7, and Server 2012. In a streamlined test project, if I replace the .NET application with a MFC unmanaged application and still utilize the same threads I see no issue even when protected with Themida. I have contacted Oreans support and here is their response: The way that a .NET application is protected is very different from a native application. To protect a .NET application, we need to hook most of the file access APIs in order to "cheat" the .NET Framework that the application is protected. I guess that those special hooks (on CreateFile, ReadFile...) are delaying a bit the execution in your application and the problem appears. We did a test making those hooks as light as possible (with minimum code on them) but the problem still appeared in your application. The rest of software protectors that we tried (like Enigma, Molebox...) also use a similar hooking approach as it's the only way to make the .NET packed file to work. If those hooks are not present, the .NET Framework will abort execution as it will see that the original file was tampered (due to all Microsoft checks on .NET files) Those hooks are not present in a native application, that's why it should be working fine on your native application. Oreans support tried other software protectors such as Enigma Protector, Engima VirtualBox, and Molebox and all exhibit the exact same problem. What I have found as a work around is to separate out the file copy logic (where the file exists call is being made) to be performed in a completely separate process. I have experimented with converting the thread functions from unmanaged C++ to VB.NET equivalents (PathFileExists - System.IO.File.Exists and CreateFile/ReadFile - System.IO.Ports.SerialPort.Open/Read) and still see the same serial port read blocked when the file check or copy call is delayed. I have also tried setting the ReadFile to work asynchronously but that had no effect. I believe I am dealing with some low-level windows layer that no matter the language it exhibits a block on a shared resource -- and only when the application is executing under a single .NET process protected by Themida which evidently installs some hooks to allow .NET execution. At this time converting the entire application away from .NET is not an option. Nor is separating out the file copy logic to a separate task. I am wondering if anyone else has more knowledge of how a file operation can block another thread reading from a system port. I have included here example applications that show the problem: https://db.tt/cNMYfEIg - VB.NET https://db.tt/Y2lnTqw7 - MFC They are Visual Studio 2010 solutions. When running the themida protected exe, you can see when the FileThread counter pauses (executing the File.Exists call) while the ReadThread counter also pauses. When running non-protected visual studio output exe, the ReadThread counter does not pause which is how we expect it to function. Thanks!

    Read the article

  • One quarter of screen corrupted on MacBook Pro

    - by danyal
    I have a problem with my MacBook Pro's screen - here's a video: http://yfrog.com/4wm63z For those who prefer words, if you divide the screen vertically into 4 columns, the second column is corrupted (flickering, and discoloured, usually with yellow). I took it to an Apple store and they said it could be the screen or the logic board, neither of which will be cheap to replace. However, occasionally this problem will completely go away. So before I part with my cash, or decide to turn this into an overpriced media center for my TV... could the problem be a loose cable, or something else cheaper to fix?

    Read the article

  • use network drives as mount points during installation?

    - by ajsie
    is it possible to use network storage locations as mount points during installation? cause i want to separate system (ubuntu) with data (personal files). eg. if i have 5 computers i don't want to recreate /home/david 5 times. so i want to mount networkdrive/home to /home in local ubuntu server. so ALL users home folders could be used and maybe also networkdrive/projects to /projects. in that way its ok if i by accident repartitioned the local ubuntu server cause all data is not there on that server, but in the data server. is separating "data" from "logic" good in this case? and is it possible? what protocol should i use for the mapping over internet? (maybe the server is in Sweden, and the data is in Norway). thanks.

    Read the article

  • 3-way quicksort, question

    - by peiska
    I am trying to understand the 3-way radix Quicksort, and i dont understand why the the CUTOFF variable there? and the insertion method? public class Quick3string { private static final int CUTOFF = 15; // cutoff to insertion sort // sort the array a[] of strings public static void sort(String[] a) { // StdRandom.shuffle(a); sort(a, 0, a.length-1, 0); assert isSorted(a); } // return the dth character of s, -1 if d = length of s private static int charAt(String s, int d) { assert d >= 0 && d <= s.length(); if (d == s.length()) return -1; return s.charAt(d); } // 3-way string quicksort a[lo..hi] starting at dth character private static void sort(String[] a, int lo, int hi, int d) { // cutoff to insertion sort for small subarrays if (hi <= lo + CUTOFF) { insertion(a, lo, hi, d); return; } int lt = lo, gt = hi; int v = charAt(a[lo], d); int i = lo + 1; while (i <= gt) { int t = charAt(a[i], d); if (t < v) exch(a, lt++, i++); else if (t > v) exch(a, i, gt--); else i++; } // a[lo..lt-1] < v = a[lt..gt] < a[gt+1..hi]. sort(a, lo, lt-1, d); if (v >= 0) sort(a, lt, gt, d+1); sort(a, gt+1, hi, d); } // sort from a[lo] to a[hi], starting at the dth character private static void insertion(String[] a, int lo, int hi, int d) { for (int i = lo; i <= hi; i++) for (int j = i; j > lo && less(a[j], a[j-1], d); j--) exch(a, j, j-1); } // exchange a[i] and a[j] private static void exch(String[] a, int i, int j) { String temp = a[i]; a[i] = a[j]; a[j] = temp; } // is v less than w, starting at character d private static boolean less(String v, String w, int d) { assert v.substring(0, d).equals(w.substring(0, d)); return v.substring(d).compareTo(w.substring(d)) < 0; } // is the array sorted private static boolean isSorted(String[] a) { for (int i = 1; i < a.length; i++) if (a[i].compareTo(a[i-1]) < 0) return false; return true; } public static void main(String[] args) { // read in the strings from standard input String[] a = StdIn.readAll().split("\\s+"); int N = a.length; // sort the strings sort(a); // print the results for (int i = 0; i < N; i++) StdOut.println(a[i]); } } from http://www.cs.princeton.edu/algs4/51radix/Quick3string.java.html

    Read the article

  • WPF BackgroundWorker Execution

    - by Sanju
    Hi All, I've been programming C# for a while now (I'm a Computer Science major), and have never had to implement threading. I am currently building an application for a client that requires threading for a series of operations. Due to the nature of the client/provider agreement, I cannot release the source I am working with. The code that I have posted is in a general form. Pretty much the basic idea of what I am implementing, excluding the content specific source. The first Snippet demonstrates my basic structure, The Progress class is a custom progress window that is displayed as a dialog to prevent user UI interaction. I am currently using the code to complete database calls based on a collection of objects in another area of the application code. For example, I have a collection of "Objects" of one of my custom classes, that I perform these database calls on or on behalf of. My current set up works just fine when I call the "GeneralizedFunction" one and only one time. What I need to do is call this function once for every object in the collection. I was attempting to use a foreach loop to iterate through the collection, then I tried a for loop. For both loops, the result was the same. The Async operation performs exactly as desired for the first item in the collection. This, however, is the only one it works for. For each subsequent item, the progress box (my custom window) displays and immediately closes. In terms of the database calls, the calls for the first item in the collection are the only ones that successfully complete. All others aren't attempted. I've tried everything that I know and don't know to do, but I just cannot seem to get it to work. How can I get this to work for my entire collection? Any and all help is very greatly appreciated. Progress progress; BackgroundWorker worker; // Cancel the current process private void CancelProcess(object sender, EventArgs e) { worker.CancelAsync(); } // The main process ... "Generalized" private void GeneralizedFunction() { progress = new Progress(); progress.Cancel += CancelProcess; progress.Owner = this; Dispatcher pDispatcher = progress.Dispatcher; worker = new BackgroundWorker(); worker.WorkerSupportsCancellation = true; object[] workArgs = { arg1, arg2, arg3}; worker.DoWork += delegate(object s, DoWorkEventArgs args) { /* All main logic here */ foreach(Class ClassObject in ClassObjectCollection) { //Some more logic here UpdateProgressDelegate update = new UpdateProgressDelegate(updateProgress); pDispatcher.BeginInvoke(update, arg1,arg2,arg3); Thread.Sleep(1000); } }; worker.RunWorkerCompleted += delegate(object s, RunWorkerCompletedEventArgs args) { progress.Close(); }; worker.RunWorkerAsync(workArgs); progress.ShowDialog(); } public delegate void UpdateProgressDelegate(arg1,arg2,arg3); private void updateProgress(arg1,arg2,arg3) { //Update progress }

    Read the article

  • Zabbix - Some of the monitored items dont get refreshd. how to find the reason?

    - by Niro
    I'm experiencing a strange issue with Zabbix monitoring a MySQL server. Most of the data from the server such as MySQL queries per second and MySQL uptime , Buffers memory etc. update nicely while some data like CPU iowait time (avg1) , Host local time ,MySQL number of threads and other items which were monitored in the past has last check time of about a week ago. I can't find any logic in this, for example Mysql number of threads and Mysql queries per second are obtained in a similar way so it does not make sense one of them is monitored and one is not. Please help- how can I fix this?

    Read the article

  • Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

    - by btucker
    When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

    Read the article

  • Php template caching design

    - by Thomas
    Hello to all, I want to include caching in my app design. Caching templates for starters. The design I have used so far is very modular. I have created an ORM implementation for all my tables and each table is represented by the corresponding class. All the requests are handled by one controller which routes them to the appropriate webmethod functions. I am using a template class for handling UI parts. What I have in mind for caching includes the implementation of a separate Cache class for handling caching with the flexibility to either store in files, apc or memcache. Right now I am testing with file caching. Some thoughts Should I include the logic of checking for cached versions in the Template class or in the webmethods which handle the incoming requests and which eventually call the Template class. In the first case, things are pretty simple as I will not have to change anything more than pass the template class an extra argument (whether to load from cache or not). In the second case however, I am thinking of checking for a cached version immediately in the webmethod and if found return it. This will save all the processing done until the logic reaches the template (first case senario). Both senarios however, rely on an accurate mechanism of invalidating caches, which brings as to Invalidating caches As I see it (and you can add your input freely) a template cached file, becomes invalidate if: a. the expiration set, is reached. b. the template file itself is updated (ie by the developer when adding a new line) c. the webmethod that handles the request changes (ie the developer adds/deletes something in the code) d. content coming from the db and ending in the template file is modified I am thinking of storing a json encoded array inside the cached file. The first value will be the expiration timestamp of the cache. The second value will be the modification time of the php file with the code handling the request (to cope with option c above) The third will be the content itself The validation process I am considering, according to the above senarios, is: a. If the expiration of the cached file (stored in the array) is reached, delete the cache file b. if the cached file's mod time is smaller than the template's skeleton file mod time, delete the cached file c. if the mod time of the php file is greated than the one stored in the cache, delete the cached file. d. This is tricky. In the ORM implementation I ahve added event handlers (which fire when adding, updating, deleting objects). I could delete the cache file every time an object thatprovides content to the template, is modified. The problem is how to keep track which cached files correpond to each schema object. Take this example, a user has his shortprofile page and a full profile page (2 templates) These templates can be cached. Now, every time the user modifies his profile, the event handler would need to know which templates or cached files correspond to the User, so that these files can be deleted. I could store them in the db but I am looking for a beter approach

    Read the article

  • I have to shard a mysql database. I want to start with 12 shards on 2 machines. What is the best w

    - by Tim
    All tables are InnoDb. I would rather not use mysqldump, because the shard sizes will be about 200 GB (about 700 million rows), and that will take too long. I was hoping to just stop mysql for an hour, copy the data files to a new machine, and start back up. But you can't do this with InnoDb, as some data is in the shared tablespace. Even if I have the innodb_file_per_table option set. This is not a website, but a custom application, used by tens of thousands right now, so uptime and performance are important. I suppose I could add logic into my server application to allow for gradual rebalancing / moving of a shard. Does anyone have a better idea?

    Read the article

  • Problem with NHibernate

    - by Bernard Larouche
    I am trying to get a list of Products that share the Category. NHibernate returns no product which is wrong. Here is my Criteria API method : public IList<Product> GetProductForCategory(string name) { return _session.CreateCriteria(typeof(Product)) .CreateCriteria("Categories") .Add(Restrictions.Eq("Name", name)) .List<Product>(); } Here is my HQL method : public IList<Product> GetProductForCategory(string name) { return _session.CreateQuery("select from Product p, p.Categories.elements c where c.Name = :name").SetString("name",name).List<Product>(); } Both methods return no product when they should return 2 products. Here is the Mapping for the Product class : <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="CBL.CoderForTraders.DomainModel" namespace="CBL.CoderForTraders.DomainModel"> <class name="Product" table="Products" > <id name="_persistenceId" column="ProductId" type="Guid" access="field" unsaved-value="00000000-0000-0000-0000-000000000000"> <generator class="assigned" /> </id> <version name="_persistenceVersion" column="RowVersion" access="field" type="int" unsaved-value="0" /> <property name="Name" column="ProductName" type="String" not-null="true"/> <property name="Price" column="BasePrice" type="Decimal" not-null="true" /> <property name="IsTaxable" column="IsTaxable" type="Boolean" not-null="true" /> <property name="DefaultImage" column="DefaultImageFile" type="String"/> <bag name="Descriptors" table="ProductDescriptors"> <key column="ProductId" foreign-key="FK_Product_Descriptors"/> <one-to-many class="Descriptor"/> </bag> <bag name="Categories" table="Categories_Products" > <key column="ProductId" foreign-key="FK_Products_Categories"/> <many-to-many class="Category" column="CategoryId"></many-to-many> </bag> <bag name="Orders" generic="true" table="OrderProduct" > <key column="ProductId" foreign-key="FK_Products_Orders"/> <many-to-many column="OrderId" class="Order" /> </bag> </class> </hibernate-mapping> And finally the mapping for the Category class : <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="CBL.CoderForTraders.DomainModel" namespace="CBL.CoderForTraders.DomainModel" default-access="field.camelcase-underscore" default-lazy="true"> <class name="Category" table="Categories" > <id name="_persistenceId" column="CategoryId" type="Guid" access="field" unsaved-value="00000000-0000-0000-0000-000000000000"> <generator class="assigned" /> </id> <version name="_persistenceVersion" column="RowVersion" access="field" type="int" unsaved-value="0" /> <property name="Name" column="Name" type="String" not-null="true"/> <property name="IsDefault" column="IsDefault" type="Boolean" not-null="true" /> <property name="Description" column="Description" type="String" not-null="true" /> <many-to-one name="Parent" column="ParentID"></many-to-one> <bag name="SubCategories" inverse="true"> <key column="ParentID" foreign-key="FK_Category_ParentCategory" /> <one-to-many class="Category"/> </bag> <bag name="Products" table="Categories_Products"> <key column="CategoryId" foreign-key="FK_Categories_Products" /> <many-to-many column="ProductId" class="Product"></many-to-many> </bag> </class> </hibernate-mapping> Can you see what could be the problem ?

    Read the article

  • Sharepoint 2007 Event ID 6482

    - by Dave M
    Our two server SharePoint 2007 SP2 farm has an issue. Event ID 6482 appears in the Application log of the Web front end many times a day. Often many time a minute. The full error is from Office SharePoint Server Event Type: Error Event Source: Office SharePoint Server Event Category: Office Server Shared Services Event ID: 6482 Date: 11/12/2009 Time: 3:05:22 PM User: N/A Computer: XXXXXX Description: Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (36a9b7ef-59aa-4f94-8887-8bf7b56f2f91). Reason: Error during encryption or decryption. System error code 0. Techinal Support Details: System.ArgumentException: Error during encryption or decryption. System error code 0. at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.SynchronizeDefaultContentSource(IDictionary applications) at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize() at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The SharePoint site appears to be functioning normally and Search returns expected results. Any suggestions would be appreciated

    Read the article

  • Puppet causes endless restarts of CUPS (how does one prevent this)

    - by Purfideas
    Hi! It makes sense, and is in fact suggested on this site, to have a critical file change trigger a service restart with puppet meta-parameters (such as notify or subscribe). For example: ## file definition for printers.conf file { "/etc/cups/printers.conf": [snip], source => "puppet:///module/etc/cups/printers.conf" } ## service definition for sshd service { 'cups': ensure => running, subscribe => File['/etc/cups/printers.conf'] } But in the case of CUPS, this triggers and endless loop of restarts; the logic works like this: Change puppetmaster's version of /etc/cups/printers.conf puppetmaster pushes new version to client, triggering cups restart cupsd restart insists on putting its own time stamp at the top of printers.conf, 'Written by cupsd...' This change will be seen as out of date, so after runinterval, we return to (1). Is there a way to suppress cupsd's need to time stamp the file? Or is there a puppet trick that could help here? Thanks!

    Read the article

  • Cant install windows 7(boot problem)

    - by Vadiklk
    First of all, I cant boot my windows 7. I get a black screen with a cursor up in the left corner. So, I tried using windows 7 installation which I've put on my flash drive. To boot from the drive, I've changed the boot order to boot from the drive first. It boots but does not find any HDD to install the windows on(which is pretty logic, I dont boot the HDD soon enough for the installer). but if i put the HDD in front of the flash drive in the boot order, it will just try to load windows 7 and i will get the black screen again. I've tried putting the HDD first and clicking f8 a lot. All I've got is an error. Something about some software change. I dunno. Help me please, cant do anything with my laptop till then.

    Read the article

  • How to fix: mac keyboard ignores "first" key pressed

    - by lexu
    UPDATE 2012.03.19: the MBP described in this post is now broken and recycled (logic board fried). The replacement doesn't manifest the same problems. I tend to believe the problem originated in the keyboard firmware of the old MBP. Every now and then, usually after I haven't pressed a key in some time, sometimes minutes, sometimes seconds, my MBP will "swallow" the the first key I press ... say I'm logging into "superuser.com" .. I start typing my username and the textbox will show "exu" instead of "lexu" This is driving me nuts! My guess is the keyboard or it's controller goes to sleep and fails to wake up propperly ... What can I do about this? PS: I've already installed "MacBook, MacBook Pro Keyboard Firmware Update 1.0"

    Read the article

  • java - unwanted object overwriting

    - by gosling
    Hello everyone! I'm trying to make a program that solves the logic wheels puzzle. I construct the root node and I try to produce the different child-nodes that are produced by making different moves of the wheels. The problem is that while I try to produce the children, the root node is overwrited,and everything is messed-up and I really don't know why. Here you can find the puzzle logic wheels. I represent the wheels as 3x3 arrays. Here is the code that implements the moves: public Node turn_right(Node aNode, int which_wheel) { Node newNode = new Node(aNode.getYellow_wheel(),aNode.getBlue_wheel(),aNode.getGreen_wheel()); int[][] yellow = new int[3][3]; int[][] blue = new int[3][3]; int[][] green = new int[3][3]; if(which_wheel==0) //turn yellow wheel of this node to right { yellow[1][0] = newNode.getYellow_wheel()[0][0]; yellow[2][0] = newNode.getYellow_wheel()[1][0]; yellow[2][1] = newNode.getYellow_wheel()[2][0]; yellow[2][2] = newNode.getYellow_wheel()[2][1]; yellow[1][2] = newNode.getYellow_wheel()[2][2]; yellow[0][2] = newNode.getYellow_wheel()[1][2]; yellow[0][1] = newNode.getYellow_wheel()[0][2]; yellow[0][0] = newNode.getYellow_wheel()[0][1]; blue = newNode.getBlue_wheel(); blue[1][0] = newNode.getYellow_wheel()[1][2]; blue[2][0] = newNode.getYellow_wheel()[2][2]; green = newNode.getGreen_wheel(); } else if(which_wheel == 1)// turn blue wheel of this node to right { blue[1][0] = newNode.getBlue_wheel()[0][0]; blue[2][0] = newNode.getBlue_wheel()[1][0]; blue[2][1] = newNode.getBlue_wheel()[2][0]; blue[2][2] = newNode.getBlue_wheel()[2][1]; blue[1][2] = newNode.getBlue_wheel()[2][2]; blue[0][2] = newNode.getBlue_wheel()[1][2]; blue[0][1] = newNode.getBlue_wheel()[0][2]; blue[0][0] = newNode.getBlue_wheel()[0][1]; yellow = newNode.getYellow_wheel(); yellow[0][2] = newNode.getBlue_wheel()[0][0]; yellow[1][2] = newNode.getBlue_wheel()[1][0]; green = newNode.getGreen_wheel(); green[1][0] = newNode.getBlue_wheel()[1][2]; green[2][0] = newNode.getBlue_wheel()[2][2]; } else if (which_wheel == 2)//turn green wheel of this node to right { green[0][0] = newNode.getGreen_wheel()[0][1]; green[0][1] = newNode.getGreen_wheel()[0][2]; green[0][2] = newNode.getGreen_wheel()[1][2]; green[1][2] = newNode.getGreen_wheel()[2][2]; green[2][2] = newNode.getGreen_wheel()[2][1]; green[2][1] = newNode.getGreen_wheel()[2][0]; green[2][0] = newNode.getGreen_wheel()[1][0]; green[1][0] = newNode.getGreen_wheel()[0][0]; yellow = newNode.getYellow_wheel(); blue = newNode.getBlue_wheel(); blue[0][2] = newNode.getGreen_wheel()[0][0]; blue[1][2] = newNode.getGreen_wheel()[1][0]; } newNode= new Node(yellow,blue,green); return newNode; } There is another function, like this one that does the oposite:it turns the wheels to left. My problem is that I do not want object's aNode tables to be overwritten. Thank you very much.

    Read the article

  • Software that supports ATA Secure Erase Command

    - by vy32
    We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

    Read the article

  • Is the Zune HD's audio card better or worse than the iPod touch's?

    - by MatthewThepc
    Firstly, if this is the wrong site to ask this question I apologize, but I didn't see one for "music players" on the stack exchange website :) After reading a few people online say that music playing from a Zune HD sounds better to them than that on an iPod touch, I was wondering whether there's any truth to that? From what I can tell, the Zune HD uses a Wolfson Microelectronics WM8352, while the first-generation iPod Touch (which the Zune HD was competing with) used a Wolfson Microelectronics WM8758BG, and newer models use the Cirrus Logic CS4398 and CS42L61. Which ones are better (to make the question less subjective, let's say in terms of quality, range, & accuracy of output)? Admittedly, I have almost no idea how everything compares and works together, but it would seem to me that, just by looking at the version numbers, the iPod has been better since it's launch. Is there anything else that effects sound quality? Thanks!

    Read the article

  • Beginner question: ArrayList can't seem to get it right! Pls help

    - by elementz
    I have been staring at this code all day now, but just can't get it right. ATM I am just pushing codeblocks around without being able to concentrate anymore, with the due time being within almost an hour... So you guys are my last resort here. I am supposed to create a few random balls on a canvas, those balls being stored within an ArrayList (I hope an ArrayList is suitable here: the alternative options to choose from were HashSet and HashMap). Now, whatever I do, I get the differently colored balls at the top of my canvas, but they just get stuck there and refuse to move at all. Apart from that I now get a ConcurrentModificationException, when running the code: java.util.ConcurrentModificationException at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:372) at java.util.AbstractList$Itr.next(AbstractList.java:343) at BallDemo.bounce(BallDemo.java:109) Reading up on that exception, I found out that one can make sure ArrayList is accessed in a threadsafe manner by somehow synchronizing access. But since I have remember fellow students doing without synchronizing, my guess is, that it would actually be the wrong path to go. Maybe you guys could help me get this to work, I at least need those stupid balls to move ;-) /** * Simulate random bouncing balls */ public void bounce(int count) { int ground = 400; // position of the ground line System.out.println(count); myCanvas.setVisible(true); // draw the ground myCanvas.drawLine(50, ground, 550, ground); // Create an ArrayList of type BouncingBalls ArrayList<BouncingBall>balls = new ArrayList<BouncingBall>(); for (int i = 0; i < count; i++){ Random numGen = new Random(); // Creating a random color. Color col = new Color(numGen.nextInt(256), numGen.nextInt(256), numGen.nextInt(256)); // creating a random x-coordinate for the balls int ballXpos = numGen.nextInt(550); BouncingBall bBall = new BouncingBall(ballXpos, 80, 20, col, ground, myCanvas); // adding balls to the ArrayList balls.add(bBall); bBall.draw(); boolean finished = false; } for (BouncingBall bBall : balls){ bBall.move(); } } This would be the original unmodified method we got from our teacher, which only creates two balls: /** * Simulate two bouncing balls */ public void bounce() { int ground = 400; // position of the ground line myCanvas.setVisible(true); myCanvas.drawLine(50, ground, 550, ground); // draw the ground // crate and show the balls BouncingBall ball = new BouncingBall(50, 50, 16, Color.blue, ground, myCanvas); ball.draw(); BouncingBall ball2 = new BouncingBall(70, 80, 20, Color.red, ground, myCanvas); ball2.draw(); // make them bounce boolean finished = false; while(!finished) { myCanvas.wait(50); // small delay ball.move(); ball2.move(); // stop once ball has travelled a certain distance on x axis if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550) { finished = true; } } ball.erase(); ball2.erase(); } }

    Read the article

  • NullPointerException using EndlessAdapter with SimpleAdapter

    - by android_dev
    Hello, I am using EndlessAdapter from commonsguy with a SimpleAdapter. I can load data when I make a scroll down without problems, but I have a NullPointerException when I make a scroll up. The problem is in the method @Override public View getView(int position, View convertView,ViewGroup parent) { return wrapped.getView(position, convertView, parent); } from the class AdapterWrapper. The call to wrapped.getView(position, convertView,parent) raises the exception and I don´t know why. This is my implementation of EndlessAdapter: //Inner class in SearchTextActivity class DemoAdapter extends EndlessAdapter { private RotateAnimation rotate = null; DemoAdapter(ArrayList<HashMap<String, String>> result) { super(new SimpleAdapter(SearchTracksActivity.this, result, R.layout.textlist_item, PROJECTION_COLUMNS, VIEW_MAPPINGS)); rotate = new RotateAnimation( 0f, 360f, Animation.RELATIVE_TO_SELF, 0.5f, Animation.RELATIVE_TO_SELF, 0.5f); rotate.setDuration(600); rotate.setRepeatMode(Animation.RESTART); rotate.setRepeatCount(Animation.INFINITE); } @Override protected View getPendingView(ViewGroup parent) { View row=getLayoutInflater().inflate(R.layout.textlist_item, null); View child=row.findViewById(R.id.title); child.setVisibility(View.GONE); child=row.findViewById(R.id.username); child.setVisibility(View.GONE); child=row.findViewById(R.id.throbber); child.setVisibility(View.VISIBLE); child.startAnimation(rotate); return row; } @Override @SuppressWarnings("unchecked") protected void rebindPendingView(int position, View row) { HashMap<String, String> res = (HashMap<String, String>)getWrappedAdapter().getItem(position); View child=row.findViewById(R.id.title); ((TextView)child).setText(res.get("title")); child.setVisibility(View.VISIBLE); child=row.findViewById(R.id.username); ((TextView)child).setText(res.get("username")); child.setVisibility(View.VISIBLE); ImageView throbber=(ImageView)row.findViewById(R.id.throbber); throbber.setVisibility(View.GONE); throbber.clearAnimation(); } boolean mFinal = true; @Override protected boolean cacheInBackground() { EditText searchText = (EditText)findViewById(R.id.searchText); String textToSearch = searchText.getText().toString(); Util.getSc().searchText(textToSearch , offset, limit, new ResultListener<ArrayList<Text>>() { @Override public void onError(Exception e) { e.toString(); mFinal = false; } @Override public void onSuccess(ArrayList<Text> result) { if(result.size() == 0){ mFinal = false; }else{ texts.addAll(result); offset++; } } }); return mFinal; } @Override protected void appendCachedData() { for(Text text : texts){ result.add(text.getMapValues()); } texts.clear(); } } And I use it this way: public class SearchTextActivity extends AbstractListActivity { private static final String[] PROJECTION_COLUMNS = new String[] { TextStore.Text.TITLE, TextStore.Text.USER_NAME}; private static final int[] VIEW_MAPPINGS = new int[] { R.id.Text_title, R.id.Text_username}; ArrayList<HashMap<String, String>> result; static ArrayList<Text> texts; static int offset = 0; static int limit = 1; @Override void onAbstractCreate(Bundle savedInstance) { setContentView(R.layout.search_tracks); setupViews(); } private void setupViews() { ImageButton searchButton = (ImageButton)findViewById(R.id.searchButton); updateView(); } SimpleAdapter adapter; void updateView(){ if(result == null) { result = new ArrayList<HashMap<String, String>>(); } if(tracks == null) { texts = new ArrayList<Text>(); } } public void sendQuery(View v){ offset = 0; texts.clear(); result.clear(); setListAdapter(new DemoAdapter(result)); } } Does anybody knows what could be the problem? Thank you in advance

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >