Search Results

Search found 21907 results on 877 pages for 'virtual box'.

Page 178/877 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Duplicate ping packages in Linux VirtualBox machine

  - by Darkmage

  i cant seem t figure out what is going on here. The Linux machine I am using is running as a VM on a Win7 machine using Virtual Box running as a service. If i ping the win7 Host i get ok result. root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.100 PING 192.168.1.100 (192.168.1.100) 10(38) bytes of data. 18 bytes from 192.168.1.100: icmp_seq=1 ttl=128 time=1.78 ms 18 bytes from 192.168.1.100: icmp_seq=2 ttl=128 time=1.68 ms if i ping localhost im ok root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 localhost PING localhost (127.0.0.1) 10(38) bytes of data. 18 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.255 ms 18 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.221 ms but if i ping gateway i get DUP packets root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 10(38) bytes of data. 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.27 ms 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.46 ms (DUP!) 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.1 ms 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.4 ms (DUP!) if i ping other machine on same LAN i stil get dups. pinging remote hosts also gives (DUP!) result root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 www.vg.no PING www.vg.no (195.88.55.16) 10(38) bytes of data. 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.0 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.3 ms (DUP!) 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.3 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.6 ms (DUP!)

  Read the article

• Simple image editor to select area of image as wallpaper

  - by Kevin

  I've spent way to many hours looking for software to do the following simple task, so now I'll ask. I need software that will open an image and put a 'crop box' on it. You can set the 'crop box' to standard screen resolutions (1024x768) or define a custom one. You can move the 'crop box' around on the image to select the area you want. You can re-size the 'crop box' (selecting a corner and dragging w/mouse) and it maintains the correct aspect ratio. You can save the area in the 'crop box' to use as the Windows background. (The software doesn't need to set it as the background, I can do that myself in Windows XP.) The free software sites (CNET.com, etc.) have lots of image editing software that do things much more complicated than this simple task. I've spent too many hours downloading them to see if they will do this particular task. The ones I've tried would require manual trial and error to get the part of an image that I want saved as an image, with the correct aspect ratio so Windows doesn't screw with it (stretch, tile, crop) when I select it as the wallpaper.

  Read the article

• SAN with iSCSI-Target Performance Horrendous

  - by Justin

  We have a poor man's SAN setup in a 1U Ubuntu server running iSCSI-Target with two 300GB drives in RAID-0. We then are using it for block level storage for virtual machines. The hypervisor is connected to the SAN via gigabit on a dedicated VLAN and interfaces. We only have a single virtual machine setup and doing some benchmarks. If we run hdparm -t /dev/sda1 from the virtual machine, we get 'ok' performance of 75MB/s from the virtual machine to the SAN. Then we basically compile a package with ./configure and make. Things start ok, but then all the sudden the load average on the SAN grows to 7+ and things slow down to a crawl. When we SSH into the SAN and run top, sure the load is 7+, but the CPU usage is basically nothing, also the server has 1.5GB of memory available. When we kill the compile on the virtual machine, slowly the LOAD on the SAN goes back to sub 1 figures. What in the world is causing this? How can we diagnosis this further? Here are two screenshot from the SAN during high load. 1> Output of iotop on the SAN: 2> Output of top on the SAN:

  Read the article

• ASPX throws "404 The resource cannot be found"

  - by Diegoeche

  I'm deploying a website under a virtual directory using IIS. For some strange reason, Default.html works, but Default.aspx throws a 404. I have tried these: There's another virtual directory that contains an older version of the application and that one just works. I checked the properties of each virtual directory and they looked the same. I checked that the root didn't had any extra backslashes

  Read the article

• mod_status: 403 Forbidden

  - by i.amniels

  I have configured mod_status like this in my Apache 2 config file: <Location /server-status> SetHandler server-status Order Deny,Allow </Location> I also tried: Order Deny,Allow allow from all And: Order Allow,Deny allow from all And: Order Deny,Allow Deny from all Allow from 145.xxx.xx.xx And of course I restarted Apache after each configuration change. I tried the configurations above in my main config file and under a VirtualHost directive. When I place the configuration under VirtualHost or in a NameVirtualHost block I get a 404 instead of 403. But I get only get 403 Forbidden when I visit example.com/server-status/ I don't use an .htaccess file. It works now! I placed the server-status code right above the definitions of the virtual hosts. I didn't test the right configuration on the right virtual host. On the virtual host without htaccess files it works, on virtual hosts with an app installed I get 404 because of url rewrites in the htaccess file.

  Read the article

• How to make possible on Asterisk meetme.conf

  - by kartook

  how can i configure in my Asterisk Server on meetme.conf Details :For conformance bridge extension : virtual Room 1 : Conference Call 567.xxx.xxxx Voice :Enter for conference dial 1 Voice : Enter your conference Pin then press pound my confrance ID: 10935 virtual Room 2 : Conference Call 567.xxx.xxxx Voice :Enter for conference dial 1 Voice : Enter your conference Pin then press pound my confrance ID: 20202 virtual Room 3 : Conference Call 567.xxx.xxxx Voice :Enter for conference dial 1 Voice : Enter your conference Pin then press pound my confrance ID: 30303

  Read the article

• Is there a Windows equivalent of Unix 'CPU steal time'?

  - by Steffen Opel

  In order to assess performance monitoring accuracy on virtualization platforms, the CPU steal time has become an increasingly relevant metric - see EC2 monitoring: the case of stolen CPU for an instructive summary in the context of Amazon EC2 and IBM's paper on CPU time accounting for a more in-depth technical explanation (including illustrations) of the concept: Steal time is the percentage of time a virtual CPU waits for a real CPU while the hypervisor is servicing another virtual processor. Accordingly, it is exposed in most related Unix/Linux monitoring tools nowadays - see e.g. columns %steal or st in sar or top: st -- Steal Time The amount of CPU 'stolen' from this virtual machine by the hypervisor for other tasks (such as running another virtual machine). I've been unable to figure out how to capture the same metric on Windows though, is this possible already? (Ideally for the Windows 2008 Server R2 AMIs on EC2 and via a respective Windows Performance Counters of course.)

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• How to set Virtualbox appliance as webdev portable sollution?

  - by tenshimsm

  I just want to set a a Virtualbox virtual appliance to make it portable. Meaning that I'll enable a network config which will not need to be changed when I am using my laptop in a different network. I want the virtual machine to have internet access to keep it updated and be able to always have direct access from host using, for example, the IP 10.0.2.100 even when I am in a 192.168.0.1 network. So the first virtual network adapter will have a static ip (10.0.2.100) and the second will receive it from the DHCP. I don't know if 2 virtual adapters are needed or just one to accomplish that.

  Read the article

• Replicate / SYNC / Copy thousands of files

  - by rihatum

  Windows 32BIT Box (Server OS) 4GB RAM a 800GB LUN Mapped to the above box as a local drive Around 700GB of text files (Yes text files and a few thousand word documents) nested in thousands of directories. I need to move this to a new storage and map another server to it. What would be the best way to go about it ? What I did was mapped the existing LUN to our new box and mapped a LUN from the New storage to the new box too, and tried copying (windows copy) but that wasn't good / fast enough considering the downtime. I am now looking for either a script which will do this or a utility (prefer opensource / free) to move this size of data at a good speed. 2 x 1GB Nics teamed ether channel 2GBPs Any suggestions or pointers would be off great help Thanks !

  Read the article

• Cannot get SCVMM Admin Console to Connect to Hyper-V Server 2008 R2

  - by user63250

  I cannot get SCVMM Admin console to connect to Hyper-V Server 2008. I have changed all firewall settings on the server to allow for a connection, I have even tried turning the firewall off completely. I am getting this error message: Unable to connect to the Virtual Machine Manager server xx.xxx.xxx.xx. the Virtual Machine Manager service on that servier did not respond. Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running. Then try to connect again. If the problem persists, restart the Virtual Machine Manager Service. ID: 1602 I have tried restarting the VMMS service, and that did not work. I have posted a similar question to this before, and was told to make sure to intall the Hyper-V agent on the Hyper-V server. I was told that SCVMM can push the agent out to the server. However, if I cannot connect to the server, how can I use SCVMM to push out the agent? Thanks for any help.

  Read the article

• Window Management for Mac OS X

  - by Paolo Maffei

  Ok, I feel dumb. I've put many hours into this and found nothing, yet. When I was using Windows I had this little tool called WinSplit Revolution. What it did was letting you divide your screen into how many and of how much size you choose "virtual monitors". You set one time of you want to divide your monitor, then everytime WinSplit is opened the monitor is automatically divided into Virtual Monitors. Screenshots: http://www.google.com/images?hl=en&q=winsplit%20revolution&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1045&bih=499 I'm now using a 30' which i want almost always divided into 4 equal size "virtual monitors" (plus my mbp 13' those will be 5 1280x800 virtual monitors) Now I've switched to Mac OS X and can't find anything that does just this efficiently. I tried Divvy but I found no way to divide my screen into arbitrary "virtual monitors", I need a couple of clicks to select a 3x3 space on a 9x9 grid. Before starting coding something like this can you tell me if you already know of some software that does window management like this?

  Read the article

• Sharing files between Mac Mini and Ubuntu

  - by Dan

  I want to get files off a Ubuntu box (10.04) and transfer them to a Mac Mini. I am connecting the two directly with a piece of network cable (Its not crossover, but I am told the Mini can handle this). The Ubuntu box has Samba installed(I think), but no internet connection. When I create a shared folder in Ubuntu it doest show up in Mac OS. But the Ubunutu box is appearing in the 'Shared' section in Mac Finder. Help

  Read the article

• Receiving Event ID: 10107, Hyper-V -VMMS

  - by Stargaten

  We are using physical disk on two of Guest operating systems. Is this a know issue? Do we need to have DPM 2010? "One or more physical disks are attached to virtual machine 'Myserver'. Back up programs that use the Hyper-V VSS writer cannot back up volumes that are attached to virtual machines as physical disks. To avoid potential data loss, use another method to back up the data on the physical disks. If you restore the data on this virtual machine, make sure to check the data of the physical disk for integrity. (Virtual machine ID 8EF3C0CB-967D-4D67-B4D8-7B782C7AC07C)"

  Read the article

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• Apache times out after 2 minutes, when Apache TimeOut is 1200

  - by Robert Gowland

  We have a set up where the browser makes an http request to Box A which in turn makes an http request to Box B. What we're encountering is that Box A waits for Box B to respond for two minutes then the users sees: The page cannot be displayed Explanation: There is a problem with the page you are trying to reach and it cannot be displayed. Try the following: * Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. * Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. * Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. Technical Information (for support personnel) * Error Code: 404 Not Found. The requested item could not be located. (12028) Watching the logs on Box B we see that it takes 5 minutes to do the work requested. The problem is that the apache time outs on both boxes are set 1200 (20m), not 120 (2m). Any ideas where to look?

  Read the article

• Loose component cables causing HDMI video problems

  - by jwir3

  I'm not sure this is the correct forum, but I'll ask anyway. I have an A/V setup at home that has something like the following: Five Components (actually a few more, like a CD player, but they don't really relate to this question): Older Pioneer Receiver Digital Set Top Box Sony BluRay Player Samsung Plasma TV Speakers The reason for the receiver is so that all the sound can go through the speakers, rather than some going to the TV speakers and some to the external speakers. They are connected as follows: Digital Set Top Box connects via component video to Samsung TV directly via Component 2 (audio goes to Older Pioneer Receiver). Sony BluRay player is connected via HDMI 1 to TV, but audio goes to the receiver. Now, the problem I'm having is that when I have the digital set top box connected, there are times when the Netflix or Hulu streams I watch through the Sony BluRay player (it's connected to a router for internet access) will lose video. What I mean by this is that the sound of the episode will keep playing, but the screen will go black. If I jiggle the component cables, it will often come back. If I disconnect the component cables, it will always come back. I've noticed that one of the connections (the red component cable) doesn't like to sit very well in the component socket in the back of the digital set top box. It seems like there is a bad connection here, but it doesn't seem like this should be affecting the HDMI input at all. What I've noticed, though, is that when I disconnect the digital set top box completely (i.e. remove the component cable from the back of the TV), the problem seems to resolve itself. I'm not talking about actually removing the cable physically, because I thought perhaps the cables were mashing against one another, and possibly jiggling each other loose. To correct this possible problem, I took the component cable completely out of the cable ties it was in in the back of my entertainment center, as well as pulled the digital set top box out from the entertainment center altogether. It's now connected directly to the TV, without any other cables touching it to cause some kind of weird interference or just physical pulling on the cable. Same problem. If, however, I disconnect the component cable and just leave it sitting behind the TV, then the problem goes away. So, my question is this - what could be causing this? Is it a case where it's an improperly shielded component cable that's causing interference with the HDMI input, or something that's wrong with the TV? It's an intermittent problem, so it's difficult to track down. The TV isn't that old, so it's probably still under warranty. I'm just wondering if there is something else I can do that might reduce this problem without having to haul a massive television set out of my house to get repaired/replaced.

  Read the article

• unable to ping hostname, but \\hostname\\c$ works!?

  - by ciscokid

  I'm having a strange issue on my initial lab setup. Situation: Host with OS Server 2008 R2 64bit, on this host a Virtual Machine in Hyper-V with OS Server 2008 SP1 32bit. The virtual machine has a fixed ip, and is referring to itself for the preferred DNS Server (dns server role has been installed). The host has tcp/ip set to automatic (so automatic ip from router, and dns/gateway = router). Both are able to ping each other on IP address (same ip range). Both are NOT able to ping each other on hostname (sounds logic because virtual machine dns server does not yet have a dns record for the hostmachine). But here's the strange thing: I am able to set up a working network mapping on the Virtual Machine to the host: \hostname\c$. The first thing I thougt was 'something' is blocking the ping request, so I completely disabled Windows Firewall on both Virtual Machine and host. Still pinging on hostname in both ways didn't work, yet I am able to access the network mapping on hostname. There is no extra software installed on both systems (clean windows server 2008).Can someone tell me what is causing this? I always thought: ping on IP address works = network mapping on IP address works. Pinging on hostname doesn't work = network mapping on hostname doesn't work neither. Where am I wrong? Looking forward to your advice!

  Read the article

• vmware vmdk disk problem

  - by dmtr

  I have a VMware ESXi 4 server and 2 storage servers (mounted via nfs). Between the storage servers (Fedora 14) is a drbd cluster (dual primary) and ocfs2 filesystem; also every server has a local partition with an ext4 filesystem, both are mounted via nfs on the esxi server. When I tried to copy a virtual machine (naturally it was powered off) from the ext4 partition to the ocfs2 partition, the vmdk total file size is different, but the md5sum is the same. On the ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 On the ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When I power on the virtual machine from the ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after the windows logo. From the ext4 partition the virtual machine workes. I tested with linux (created and installed on ext4 partition and then copied to the ocfs2) and the same problem appears. When I create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and I have the same problem. Any suggestions?

  Read the article

• The Alias directive ... will probably never match because it overlaps an earlier Alias.

  - by mmattax

  I'm getting this warning from Apache: The Alias directive in /etc/httpd/conf.d/foo.conf at line 10 will probably never match because it overlaps an earlier Alias. However the Alias overlaps on a completely different virtual host. Might this be caused because one alias is on a name-based virtual host while the other alias is on an IP-based virtual host? Everything is working fine, just the warning is a bit annoying...

  Read the article

• Gre tunnel Linux Cisco

  - by mezgani

  I've created a GRE tunnel between LAN A and LAN B. LAN A is behind a router, and LAN B is behind a Linux box and this box has a pppoe interface. When i do tcpdump on Linux box i see that the traffic is routerd to Linux box (tunnel end), so my need is routing the tunnel traffic to internet. I've added these rules to my iptables script, and i stay unable to connect to internet from LAN A Permitting Linux to act as router (necessary to forward packets) echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o gre0 -j MASEQUARADE What i've forgot to set in this case?

  Read the article

• How to config putty remote port forwarding to connect mysql?

  - by kev

  I installed MySQL to a Windows box. I want to connect it from a Linux box. I run plink to setup a remote port forwarding in Windows box. I try to connect it from Linux box, but it's not working. Windows (192.168.1.101) C:\> plink -v -N -R 3306:localhost:3306 [email protected] -pw ADMIN Also tried putty with this config: Port forwarding: R3306->localhost:3306 Linux (192.168.1.102) $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) $ nc localhost 3306 J 5.5.283V6L[fnu¦¦!¦$N>-c-R9bbG{mysql_native_password

  Read the article

• Linux (DUP!) ping packages

  - by Darkmage

  i cant seem t figure out what is going on here. The Linux machine I am using is running as a VM on a Win7 machine using Virtual Box running as a service. If i ping the win7 Host i get ok result. root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.100 PING 192.168.1.100 (192.168.1.100) 10(38) bytes of data. 18 bytes from 192.168.1.100: icmp_seq=1 ttl=128 time=1.78 ms 18 bytes from 192.168.1.100: icmp_seq=2 ttl=128 time=1.68 ms if i ping localhost im ok root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 localhost PING localhost (127.0.0.1) 10(38) bytes of data. 18 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.255 ms 18 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.221 ms but if i ping gateway i get DUP packets root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 10(38) bytes of data. 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.27 ms 18 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.46 ms (DUP!) 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.1 ms 18 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=22.4 ms (DUP!) if i ping other machine on same LAN i stil get dups. pinging remote hosts also gives (DUP!) result root@Virtual-Box:/home/glennwiz# ping -c 100000 -s 10 -i 0.02 www.vg.no PING www.vg.no (195.88.55.16) 10(38) bytes of data. 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.0 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=1 ttl=245 time=10.3 ms (DUP!) 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.3 ms 18 bytes from www.vg.no (195.88.55.16): icmp_seq=2 ttl=245 time=10.6 ms (DUP!)

  Read the article

• Apache times out after 2 minutes, when Apache TimeOut is 120

  - by Robert Gowland

  We have a set up where the browser makes an http request to Box A which in turn makes an http request to Box B. What we're encountering is that Box A waits for Box B to respond for two minutes then the users sees: The page cannot be displayed Explanation: There is a problem with the page you are trying to reach and it cannot be displayed. Try the following: * Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion. * Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped. * Access from a link: If there is a link to the page you are looking for, try accessing the page from that link. Technical Information (for support personnel) * Error Code: 404 Not Found. The requested item could not be located. (12028) Watching the logs on Box B we see that it takes 5 minutes to do the work requested. The problem is that the apache time outs on both boxes are set 1200 (20m), not 120 (2m). Any ideas where to look?

  Read the article

• What does ESXI server do

  - by Mirage

  I installed ESXI server on my machine hoping that it will be similar to workstation where i can install virtual machines. But when i installed it , it shows one screen with no options for making virtual machines. If can't make virtual machines from ESXI , then what is it used for. I formatted my Harddisk just for ESXi but then again had to install windows and then VM workstation.

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >