Search Results

Search found 3536 results on 142 pages for '7 04'.

Page 18/142 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Path of md device wrong after reboot

  - by flammi88

  I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that drive) 2 TB Sata hdd (first disk in raid array, data disk) 2 TB Sata hdd (second data disk) I created one partition on every data disk with the type Linux raid autodetect. In the second step I created the raid1 with the following command: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1 After that, I added the array to the mdconf: mdadm --examine --scan >> /etc/mdadm/mdadm.conf The problem is: After a reboot the array is not available on the path /dev/md0. Instead of that it gets reassembled as /dev/md/0 but it is not very reliable. Has anybody a solution for this issue?

  Read the article

• Setup NTPD in Ubuntu to sync Windows AD

  - by David

  I am setting up my Ubuntu 10.0.4 server to sync clock with a Windows 2008 AD. As none of the "remote" has a "*" in front (worst it had a blank space in front), does it mean no time sync source is selected? The offset just keep increasing. I tried ntpdate to the same server it worked OK. remote refid st t when poll reach delay offset jitter ============================================================================== 172.18.133.201 .LOCL. 1 u 38 64 377 0.827 277.677 58.375 Any help to fix this? Here is my ntp.conf (with all comments removed) driftfile /var/lib/ntp/ntp.drift statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable restrict -4 default kod notrap nomodify nopeer noquery restrict -6 default kod notrap nomodify nopeer noquery restrict 127.0.0.1 restrict ::1 server 172.18.133.201 iburst

  Read the article

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• Black screen on Ubuntu 12.04

  - by user1648371

  I've just upgraded to Ubuntu 12.04 and I'm experiencing some problems. The first thing I noticed is that when I click the Workspace switcher all I get is a black screen (I can guess where the different workspaces are located and clicked on them, not a practical solution though). In addition when I lock the screen or suspend the laptop (a Vaio VPCEB4M1E) I get a shifted screen (I see the right most vertical stripe on the left size of the monitor and nothing about all the rest, to put it clearly I can see the gear that allows me to turn the pc off, etc, but not much more..) when I go to the additional driver menu I see the "ATI/AMD proprietary FGLRX graphics driver" are installed and the post-release update version is available. I don't know if the problem is driver related, so before doing anything I'd like to get some suggestions from you guys. Thanks you!

  Read the article

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• "No version information available" - After installing Postgres

  - by intellidiot

  I have installed Postgres 9.1.4 on an Ubuntu 12.04 (precise) 64-bit from here http://www.openscg.com/se/postgresql/packages.jsp, but right after installing many commands (programs) are throwing these following warnings in different combinations: /opt/postgres/9.1/lib/libxml2.so.2: no version information available /opt/postgres/9.1/lib/libcrypto.so.1.0.0: no version information available /opt/postgres/9.1/lib/libssl.so.1.0.0: no version information available Though this is not restricting anything, this is often getting very annoying. Is there a way to get rid of this without uninstalling Postgres?

  Read the article

• (Ubuntu) How I can make sudo ubuntu 10.04 session an hour and not few minutes?

  - by meyosef

  Hi, How I can make sudo ubuntu 10.04 session an hour and not few minutes? (Now i have to write my password for sudo commands every few minutes) Thanks

  Read the article

• Munin not creating HTML files in Ubuntu Server 14.04

  - by lepe

  I have used munin in several servers and this is the first time is taking me so much time to set it up. When I telnet munin directly, I can list the services, there is no error at the logs and munin its being updated every 5 minutes. However no html files are created. I'm using the default location (/var/cache/munin/www) and I can confirm the permissions of that directory are set to munin.munin (IP and domain has been changed) munin.conf: dbdir /var/lib/munin htmldir /var/cache/munin/www logdir /var/log/munin rundir /var/run/munin [example.com;] address 100.100.50.200 munin-node.conf: log_level 4 log_file /var/log/munin/munin-node.log pid_file /var/run/munin/munin-node.pid background 1 setsid 1 user root group root host_name example.com allow ^127\.0\.0\.1$ allow ^100\.100\.50\.200$ allow ^::1$ /etc/hosts : 100.100.50.200 example.com 127.0.0.1 localhost $ telnet example.com 4949 Trying 100.100.50.200... Connected to example.com. Escape character is '^]'. # munin node at example.com list apache_accesses apache_processes apache_volume cpu cpuspeed df df_inode entropy fail2ban forks fw_packets if_err_eth0 if_err_eth1 if_eth0 if_eth1 interrupts ipmi_fans ipmi_power ipmi_temp irqstats load memory munin_stats mysql_bin_relay_log mysql_commands mysql_connections mysql_files_tables mysql_innodb_bpool mysql_innodb_bpool_act mysql_innodb_insert_buf mysql_innodb_io mysql_innodb_io_pend mysql_innodb_log mysql_innodb_rows mysql_innodb_semaphores mysql_innodb_tnx mysql_myisam_indexes mysql_network_traffic mysql_qcache mysql_qcache_mem mysql_replication mysql_select_types mysql_slow mysql_sorts mysql_table_locks mysql_tmp_tables ntp_2001:e40:100:208::123 ntp_91.189.94.4 ntp_kernel_err ntp_kernel_pll_freq ntp_kernel_pll_off ntp_offset ntp_states open_files open_inodes postfix_mailqueue postfix_mailvolume proc_pri processes swap threads uptime users vmstat fetch df _dev_sda3.value 2.1762874086869 _sys_fs_cgroup.value 0 _run.value 0.0503536980635825 _run_lock.value 0 _run_shm.value 0 _run_user.value 0 _dev_sda5.value 0.0176986285727571 _dev_sda8.value 1.08464646179852 _dev_sda7.value 0.0346633563514803 _dev_sda9.value 6.81031810822797 _dev_sda6.value 9.0932802215469 . /var/log/munin/munin-node.log Process Backgrounded 2014/08/16-14:13:36 Munin::Node::Server (type Net::Server::Fork) starting! pid(19610) Binding to TCP port 4949 on host 100.100.50.200 with IPv4 2014/08/16-14:23:11 CONNECT TCP Peer: "[100.100.50.200]:55949" Local: "[100.100.50.200]:4949" 2014/08/16-14:36:16 CONNECT TCP Peer: "[100.100.50.200]:56209" Local: "[100.100.50.200]:4949" /var/log/munin/munin-update.log ... 2014/08/16 14:30:01 [INFO]: Starting munin-update 2014/08/16 14:30:01 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:35:02 [INFO]: Starting munin-update 2014/08/16 14:35:02 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:40:01 [INFO]: Starting munin-update 2014/08/16 14:40:01 [INFO]: Munin-update finished (0.00 sec) $ ls -la /var/cache/munin/www/ drwxr-xr-x 3 munin munin 19 Aug 16 13:55 . drwxr-xr-x 3 root root 16 Aug 16 13:54 .. drwxr-xr-x 2 munin munin 4096 Aug 16 13:55 static Any ideas on why it is not working? EDIT This is how /var/log/munin/ log looks like after some days: -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-graph.log -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-html.log -rw-rw-r-- 1 munin 0 Aug 16 13:55 munin-html.log -rw-r----- 1 munin 0 Aug 19 06:18 munin-limits.log -rw-r----- 1 munin 15K Aug 18 14:10 munin-limits.log.1 -rw-r----- 1 munin 1.8K Aug 18 06:15 munin-limits.log.2.gz -rw-rw-r-- 1 munin 1.3K Aug 17 06:15 munin-limits.log.3.gz -rw-r--r-- 1 root 6.5K Aug 16 13:55 munin-node-configure.log -rw-r--r-- 1 root 0 Aug 17 06:18 munin-node.log -rw-r--r-- 1 root 420 Aug 16 14:52 munin-node.log.1.gz -rw-r----- 1 munin 0 Aug 19 06:18 munin-update.log -rw-r----- 1 munin 11K Aug 18 14:10 munin-update.log.1 -rw-r----- 1 munin 1.6K Aug 18 06:15 munin-update.log.2.gz -rw-rw-r-- 1 munin 1.5K Aug 17 06:15 munin-update.log.3.gz

  Read the article

• Horde complains that Imp is not running

  - by Eric J.

  I'm a mostly-Windows guy tasked with setting up email on an Ubuntu 12.04 instance at AWS and hit the following error: When I browse to Horde, after entering my administrative credentials, I get the error message: A fatal error has occurred imp is not activated. Details have been logged for the administrator. I am following the following, quite detailed guide http://www.exratione.com/2012/05/a-mailserver-on-ubuntu-1204-postfix-dovecot-mysql/ This is happening at Step 20, at the text Now fire up you web browser and navigate to your server at http://mail.example.com/ to verify that you can log in as the configured administrative mail user. (of course I used my actual domain). Questions Where is Horde logging the "details"? Any thoughts on why this might happen? I found Google hits suggesting that php5-mcrypt might be missing, but I verified it is installed and up-to-date in my case.

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• MySQL permission errors

  - by dotancohen

  It seems that on a Ubuntu 14.04 machine the user mysql cannot access anything. It is not writing logs nor reading files. Witness: - bruno():mysql$ cat /etc/passwd | grep mysql mysql:x:116:127:MySQL Server,,,:/nonexistent:/bin/false - bruno():mysql$ sudo mysql_install_db Installing MySQL system tables... 140818 18:16:50 [ERROR] Can't read from messagefile '/usr/share/mysql/english/errmsg.sys' 140818 18:16:50 [ERROR] Aborting 140818 18:16:50 [Note] Installation of system tables failed! Examine the logs in /var/lib/mysql for more information. ...boilerplate trimmed... - bruno():mysql$ ls -la /usr/share/mysql/english/errmsg.sys -rw-r--r-- 1 root root 59535 Jul 29 13:40 /usr/share/mysql/english/errmsg.sys - bruno():mysql$ wc -l /usr/share/mysql/english/errmsg.sys 16 /usr/share/mysql/english/errmsg.sys Here we have seen that mysql cannot read /usr/share/mysql/english/errmsg.sys even though the permissions are open to read it, and in fact the regular login user can read the file (with wc). Additionally, MySQL is not writing any logs: - bruno():mysql$ ls -la /var/log/mysql total 8 drwxr-s--- 2 mysql adm 4096 Aug 18 16:10 . drwxrwxr-x 18 root syslog 4096 Aug 18 16:10 .. What might cause this user to not be able to access anything? What can I do about it?

  Read the article

• Ubuntu 10.04 server, problems installing the desktop

  - by ILMV

  Hi all, I have just setup two servers running 10.04 server and have installed the ubuntu-desktop as follows: sudo apt-get install ubuntu-desktop The problem is even though it says it has installed it will not auto-start... I've tried this: sudo mv /etc/init/gdm.conf /etc/init/gdm.disabled sudo mv /etc/init/gdm.disabled /etc/init/gdm.conf To enable/disable it but still not joy. Any ideas? Thanks, Ben

  Read the article

• How to do an automated installation of Ubuntu on 100 Remote machines?

  - by user40876

  Help!  I desperately need some advice / help... I want an automated install (via CD or USB) of Ubuntu 10.04 ...on 100 remote machines located all over the country, using a Kickstart configuration file accessible from my web server. How do I create the boot CD (or USB)? How do I specifically add the boot parameters to that boot CD (or USB) to tell it the URL to use for it's automated Kickstart install?

  Read the article

• Route forwarded traffic through eth0 but local traffic through tun0

  - by Ross Patterson

  I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

  Read the article

• ubuntu automount: only mounting drives as root?

  - by glisignoli

  I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

  Read the article

• Dynamic Subdomain for localhost ubuntu 8.04

  - by makdotgnu

  Hi, I'm using ubuntu 8.04 and apache2, for my development I need a dynamic sub domains. for example If I go to abc.localhost/ it should redirect to localhost/ Can you guys help me out how I can achieve this in ubuntu 8.04. thank you.

  Read the article

• No Wi-Fi after installing Ubuntu 10.04

  - by EpsilonVector

  I have an HP Pavilion dv6500 with a Broadcom 802.11g Network Adapter. I installed Ubuntu 10.04 and the Wi-Fi doesn't work. I am new to Linux. How do I go about troubleshooting/fixing this? Is there a diagnostic script I can run and post results from?

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• Can't set 1280x1024 on Ubuntu with Nvidia Geforce 8400 GS

  - by torbengb

  Ubuntu doesn't offer 1280x1024 but that's what my monitor has -- I want to set that resolution but need help doing so. Ubuntu offers 1360x768, 1152x864, 1024x768 when using the Nvidia driver version 180. This is Ubuntu 9.04 installed as "Wubi" through Windows, I believe it's the amd64 version. Google gave me this precise explanation which is complete latin to me; I'm a Windows guy and not familiar with Terminal. These SU questions also don't provide answers, hence this new question. I hope you can help, and I will provide additional info if required.

  Read the article

• Unable to install rubygems in ubuntu 10.04

  - by loganathan

  I had installed the ruby 1.8.7 with patch level 253 successfully on my ubuntu 10.04, but while installing ruby gems I am facing the below error, can anybody help me on this. ruby -v ruby 1.8.7 (2010-04-19 patchlevel 253) [i686-linux], MBARI 0x8770, Ruby Enterprise Edition 2010.02 gem install mongrel *** longjmp causes uninitialized stack frame ***: /usr/bin/ruby terminated ======= Backtrace: ========= /lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x50)[0x3612d0] /lib/tls/i686/cmov/libc.so.6(+0xe223a)[0x36123a] /usr/bin/ruby[0x80577b9] /usr/bin/ruby[0x80577d5] /usr/bin/ruby(rb_thread_schedule+0x9fc)[0x80652ac] /usr/bin/ruby(rb_thread_kill+0x14)[0x8066c74] /usr/bin/ruby[0x806071d] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x806a290] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x806995b] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x8069d54] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x805df2d] /usr/bin/ruby[0x8069581] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x806a715] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x805e58a] /usr/bin/ruby[0x805e4aa] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x80693f1] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806a869] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x806a0eb] /usr/bin/ruby[0x805e630] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] /usr/bin/ruby[0x80608b9] /usr/bin/ruby[0x806aaa5] /usr/bin/ruby[0x805e48b] /usr/bin/ruby[0x805de52] /usr/bin/ruby[0x8060601] ======= Memory map: ======== 00110000-00112000 r-xp 00000000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00112000-00113000 r--p 00001000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00113000-00114000 rw-p 00002000 08:06 3805677 /usr/lib/ruby/1.8/i686-linux/etc.so 00114000-0012e000 r-xp 00000000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 0012e000-0012f000 r--p 00019000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 0012f000-00130000 rw-p 0001a000 08:06 3805682 /usr/lib/ruby/1.8/i686-linux/syck.so 00130000-00131000 r-xp 00000000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00131000-00132000 r--p 00000000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00132000-00133000 rw-p 00001000 08:06 3805666 /usr/lib/ruby/1.8/i686-linux/fcntl.so 00133000-00150000 r-xp 00000000 08:06 11403438 /lib/libgcc_s.so.1 00150000-00151000 r--p 0001c000 08:06 11403438 /lib/libgcc_s.so.1 00151000-00152000 rw-p 0001d000 08:06 11403438 /lib/libgcc_s.so.1 001e2000-00206000 r-xp 00000000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 00206000-00207000 r--p 00023000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 00207000-00208000 rw-p 00024000 08:06 11403697 /lib/tls/i686/cmov/libm-2.11.1.so 0024d000-00256000 r-xp 00000000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00256000-00257000 r--p 00008000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00257000-00258000 rw-p 00009000 08:06 11403688 /lib/tls/i686/cmov/libcrypt-2.11.1.so 00258000-0027f000 rw-p 00000000 00:00 0 0027f000-003d2000 r-xp 00000000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d2000-003d4000 r--p 00153000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d4000-003d5000 rw-p 00155000 08:06 11403695 /lib/tls/i686/cmov/libc-2.11.1.so 003d5000-003d8000 rw-p 00000000 00:00 0 0047e000-00488000 r-xp 00000000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 00488000-00489000 r--p 00009000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 00489000-0048a000 rw-p 0000a000 08:06 3805680 /usr/lib/ruby/1.8/i686-linux/socket.so 004f2000-00507000 r-xp 00000000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00507000-00508000 r--p 00014000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00508000-00509000 rw-p 00015000 08:06 11403690 /lib/tls/i686/cmov/libpthread-2.11.1.so 00509000-0050b000 rw-p 00000000 00:00 0 00524000-00525000 r-xp 00000000 00:00 0 [vdso] 00544000-00557000 r-xp 00000000 08:06 11403553 /lib/libz.so.1.2.3.3 00557000-00558000 r--p 00012000 08:06 11403553 /lib/libz.so.1.2.3.3 00558000-00559000 rw-p 00013000 08:06 11403553 /lib/libz.so.1.2.3.3 00639000-0063c000 r-xp 00000000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 0063c000-0063d000 r--p 00002000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 0063d000-0063e000 rw-p 00003000 08:06 3805679 /usr/lib/ruby/1.8/i686-linux/thread.so 00649000-0064d000 r-xp 00000000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 0064d000-0064e000 r--p 00004000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 0064e000-0064f000 rw-p 00005000 08:06 11403714 /lib/tls/i686/cmov/libnss_dns-2.11.1.so 00663000-006a3000 r-xp 00000000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a3000-006a4000 r--p 0003f000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a4000-006a5000 rw-p 00040000 08:06 4329500 /usr/lib/ruby/site_ruby/1.8/i686-linux/openssl.so 006a5000-006a6000 rw-p 00000000 00:00 0 0070d000-0070f000 r-xp 00000000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 0070f000-00710000 r--p 00001000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 00710000-00711000 rw-p 00002000 08:06 11403689 /lib/tls/i686/cmov/libdl-2.11.1.so 00711000-0084b000 r-xp 00000000 08:06 11403909 /lib/libcrypto.so.0.9.8 0084b000-00853000 r--p 00139000 08:06 11403909 /lib/libcrypto.so.0.9.8 00853000-00861000 rw-p 00141000 08:06 11403909 /lib/libcrypto.so.0.9.8 00861000-00864000 rw-p 00000000 00:00 0 00864000-00865000 ---p 00000000 00:00 0 00865000-00966000 rwxp 00000000 00:00 0 00977000-00979000 r-xp 00000000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 00979000-0097a000 r--p 00001000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 0097a000-0097b000 rw-p 00002000 08:06 11403476 /lib/libnss_mdns4_minimal.so.2 009fa000-00a04000 r-xp 00000000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00a04000-00a05000 r--p 00009000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00a05000-00a06000 rw-p 0000a000 08:06 11403691 /lib/tls/i686/cmov/libnss_files-2.11.1.so 00ac0000-00ac4000 r-xp 00000000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00ac4000-00ac5000 r--p 00003000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00ac5000-00ac6000 rw-p 00004000 08:06 3805670 /usr/lib/ruby/1.8/i686-linux/stringio.so 00af3000-00b0e000 r-xp 00000000 08:06 11403607 /lib/ld-2.11.1.so 00b0e000-00b0f000 r--p 0001a000 08:06 11403607 /lib/ld-2.11.1.so 00b0f000-00b10000 rw-p 0001b000 08:06 11403607 /lib/ld-2.11.1.so 00c35000-00c45000 r-xp 00000000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c45000-00c46000 r--p 00010000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c46000-00c47000 rw-p 00011000 08:06 11403692 /lib/tls/i686/cmov/libresolv-2.11.1.so 00c47000-00c49000 rw-p 00000000 00:00 0 00d51000-00d59000 r-xp 00000000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d59000-00d5a000 r--p 00007000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d5a000-00d5b000 rw-p 00008000 08:06 4329502 /usr/lib/ruby/site_ruby/1.8/i686-linux/zlib.so 00d60000-00d61000 r-xp 00000000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00d61000-00d62000 r--p 00000000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00d62000-00d63000 rw-p 00001000 08:06 3805664 /usr/lib/ruby/1.8/i686-linux/rational.so 00de6000-00de9000 r-xp 00000000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00de9000-00dea000 r--p 00002000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00dea000-00deb000 rw-p 00003000 08:06 3805691 /usr/lib/ruby/1.8/i686-linux/digest.so 00e63000-00e6a000 r-xp 00000000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00e6a000-00e6b000 r--p 00006000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00e6b000-00e6c000 rw-p 00007000 08:06 11403700 /lib/tls/i686/cmov/librt-2.11.1.so 00f70000-00fb4000 r-xp 00000000 08:06 11403907 /lib/libssl.so.0.9.8Aborted

  Read the article

• AWS EC2 can't execute user-data script

  - by Bloodnut

  I'm pretty new to AWS and EC2 but I want to run instances with a user script after it's booted from another instance. I have installed ec2 tools and ran the command as it's explained in various examples like here http://www.turnkeylinux.org/blog/ec2-userdata and Eric Hammond's tutorials. however when I actually use the command: "ec2-run-instances --key my-key --user-data-file myscript my-ami" it only runs the new instance but doesn't execute the script myscript contains: #!/bin/bash echo "hello" ~/output.txt I'm running ubuntu server 12.04 AMIs. the target AMIs are duplicates of the initiating instance. if I run curl http:// 169.254.169.254/latest/user-data the imported script is there.

  Read the article

• Repair GRUB bootloader for multiboot system

  - by user1715324

  I have two hard disks – one a 1TB and the other a 250 GB. I installed the OSes in the following order: Windows 7 on the first hard disk (1 TB) After that Kubuntu 12.04 on a partition (/dev/sdb7) on the second hard disk (250 GB) The second drive also contains an NTFS partition. Now, kubuntu's bootloader was installed on the second hard drive's MBR (and successfully detected Windows 7). So, whenever I wanted to load Windows I used to select the first hard disk from the BIOS boot menu and the second hard disk whenever I wanted to load kubuntu. I know I could have set the second hard disk as the default drive, still I prefered this method. The problem started when I installed Linux Mint 13 on the second hard disk (/dev/sdb3) and overwrote kubuntu's original MBR. Now, the GRUB just detects Mint and Windows. The MBR on the 1 TB hard disk is untouched. Is there a way I can modify the MBR on the second hard disk now so that it will show kubuntu and Mint both?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >