Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 180/751 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Learning Electronics & the Arduino Microcontroller

  - by Chris Williams

  Lately, I've had a growing interest in Electronics & Microcontrollers. I'm a loyal reader of Make Magazine and thoroughly enjoy seeing all the various projects in each issue, even though I rarely try to make any of them. I've been reading and watching videos about the Arduino, which is an open source Microcontroller and software project that the people at Make (and a lot of other folks) are pretty hot about. Even the prebuilt hardware is remarkably inexpensive , although there are kits available to build one from the base components. (Full disclosure: I bought my first soldering iron... EVER... just last week, so I fully acknowledge the likelihood of making some mistakes. That's why I'm not trying to do the "build it yourself" kit just yet. It's also another reason to be happy the hardware is so cheap.) There are a number of different Arduino boards available, but the two that have really piqued my interest are the Arduino UNO and the NETduino. The UNO is a very popular board, with a number of features and is under $35 which means I won't hurl myself off a bridge when I inevitably destroy it. The NETduino is very similar to the Arduino UNO and has the added advantage of being programmable with... you guessed it... C#. I'm actually ordering both boards and some miscellaneous other doodads to go with them.  There are a few good websites for this sort of thing, including www.makershed.com and www.adafruit.com. The price difference is negligible, so in my case, I'm ordering from Maker Shed (the Make Magazine people) because I want to support them. :) I've also picked up a few O'Reilly books on the subject which I am looking forward to reading & reviewing: Make: Electronics, Arduino: A Quick Start Guide and Getting Started With Arduino (all three of which arrived on my doorstep today.) This ties in with my "learn more about robotics" goals as well, since I'll need a good understanding of Electronics if I want to move past Lego Mindstorms eventually.

  Read the article

• School vs Self-Taught [duplicate]

  - by Joan Venge

  This question already has an answer here: Do I need a degree in Computer Science to get a junior Programming job? [closed] 8 answers Do you think university is a good learning environment or is it better to be autodidact? [closed] 3 answers Do you think formal education is necessary to gain strong programming skills? There are a lot of jobs that aren't programming but involves programming, such as tech artists in games, fx tds in film for example. I see similar patterns in the people I work where the best ones I have seen were self-taught, because of being artists primarily. But I also see that while the software, programming knowledge is varied and deep, hardware knowledge is very basic, including me, again due to lack of formal education. But I also work with a lot of programmers who possess both skills in general (software and hardware). Do you think it's necessary to have a formal education to have great programming skills? Would you think less of someone if he didn't have a degree in computer science, or software engineering, etc in terms of job opportunities? Would you trust him to do a software engineering job, i.e. writing a complex tool? Basically I feel the self-taught programmer doesn't know a lot of things, i.e. not knowing a particular pattern or a particular language, etc. But I find that the ability to think outside the box much more powerful. As "pure" programmers what's your take on it?

  Read the article

• Kids and programming: ScratchKara

  - by Mike Pagel

  Ever now and then I kept wondering how to share with my kids the excitement of creating something with your computer. Of course, today this is a bit more difficult, as they have seen 3D animation games and well-edited websites. I guess that's why they weren't all that hyped when I found my first computer model at our local recycling facilities (an 8-bit Laser VZ-200 with rubber keys). When I finally got it up and running with an old analog TV set they finally asked whether we could play soccer on it. Needless to say that my showing them how it remembers some BASIC commands and lists and executes them did not make any impression. So the question is for real: How do you get today's kids excited about programming? And just recently I looked again for environments that allow even young kids (mine are 7 and 9 years old now) to do something and have fun. Obviously any real, text-oriented programming language wouldn't work well. To cut it short: Something really nice was built by University of Oldenburg: ScratchKara. It is the perfect mixture of Kara, a simulation of a little ladybug and Scratch, an authoring environment from MIT. ScratchKara allows kids to initially simply explore how the bug moves and turns by pressing the action buttons, then move towards sequencing commands through drag & drop, and eventually end up building algorithms with procedures and functions. Even through it is built for kids and beginners, the environment comes with debugging and refactoring, which I found more than amazing. My kids love it and I have to admit I keep thinking about how to solve a bit more advanced problems with this language, which does not allow you to store any state information (other than your call stack). Yes, I am hooked, too... Once the language is understood you can then move to one of the original Kara versions, where you can define the bug's behavior through finite statemachines, Turing tables, Java and other textual languages. And from there, anything is possible.

  Read the article

• cpufreq-selector, cpufreq-info reporting wrong max speed

  - by dty

  Hi, I've just built a new machine with a Core i5-760 CPU. Max speed is 2.80GHz (turbo mode notwithstanding). I've also done a vanilla install of Ubuntu 10.10. I've added the cpufreq-selector applet to the top panel, and its menus only allow me to select up to 2.39GHz. If I select the "performance" governor, it also shows 2.39GHz. cpufreq-info reports: $ cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.20 GHz - 2.39 GHz available frequency steps: 2.39 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.20 GHz and 2.39 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.20 GHz. cpufreq stats: 2.39 GHz:13.74%, 2.26 GHz:0.09%, 2.13 GHz:0.08%, 2.00 GHz:0.08%, 1.86 GHz:0.07%, 1.73 GHz:0.07%, 1.60 GHz:0.08%, 1.46 GHz:0.08%, 1.33 GHz:0.11%, 1.20 GHz:85.61% (15560) [...CPUs 1-3 elided, but similar...] Any idea how to get Ubuntu and the various tools to recognise this as a 2.80GHz processor? And ideally to report the actual speed when running in turbo mode too, but that's not critical. Edit: I should probably add that the BIOS (& Windows) are quite happy that it's a 2.80GHz CPU. Thanks.

  Read the article

• How to go from Mainframe to the Cloud?

  - by Ruma Sanyal

  Running applications on IBM mainframes is expensive, complex, and hinders IT responsiveness. The high costs from frequent forced upgrades, long integration cycles, and complex operations infrastructures can only be alleviated by migrating away from a mainframe environment.  Further, data centers are planning for cloud enablement pinned on principles of operating at significantly lower cost, very low upfront investment, operating on commodity hardware and open, standards based systems, and decoupling of hardware, infrastructure software, and business applications. These operating principles are in direct contrast with the principles of operating businesses on mainframes. By utilizing technologies such as Oracle Tuxedo, Oracle Coherence, and Oracle GoldenGate, businesses are able to quickly and safely migrate away from their IBM mainframe environments. Further, running Oracle Tuxedo and Oracle Coherence on Oracle Exalogic, the first and only integrated cloud machine on the market, Oracle customers can not only run their applications on standards-based open systems, significantly cutting their time to market and costs, they can start their journey of cloud enabling their mainframe applications. Oracle Tuxedo re-hosting tools and techniques can provide automated migration coverage for more than 95% of mainframe application assets, at a fraction of the cost Oracle GoldenGate can migrate data from mainframe systems to open systems, eliminating risks associated with the data migration Oracle Coherence hosts transactional data in memory providing mainframe-like data performance and linear scalability Running Oracle software on top of Oracle Exalogic empowers customers to start their journey of cloud enabling their mainframe applications Join us in a series of events across the globe where you you'll learn how you can build your enterprise cloud and add tremendous value to your business. In addition, meet with Oracle experts and your peers to discuss best practices and see how successful organizations are lowering total cost of ownership and achieving rapid returns by moving to the cloud. Register for the Oracle Fusion Middleware Forum event in a city new you!

  Read the article

• Essbase Excel Add in - S.o.D.

  - by THE

  #cross { font-size: 72pt; } sadly another long lasting friend is about to be buried in the wet, cold data void that holds past programs (... and AOL CDs). The Essbase Excel Add In is about to be de-continued (see  Doc ID 1466700.1) in January '13. The (already out) version 11.1.2.2.x of the Excel Add In must be considered the last release of this particular program (Unless the guys from Applied OLAP bring out their own version next to the openOffice Add In that they already sport). As expected, SmartView achieved parity in functionality with Release 11.1.2.1.102 and ever since then it was just a question of time when our old buddy would get the shoe. For all users out there like me that have known and worked with the Excel Add In for the last decade(s) this is a loss. SmartView may have functionality parity, and may altogether be the stronger, open technology - capable of Planning forms, connection to HFM etc. .But (from my personal point of view) it will not give the end user the same direct access to his databases, with nothing between him and his Essbase Server. Of course it was to be expected that only one of the two could survive and it was obvious that this would be SmartView, so this does not come as a surprise. Still.A minute for an old friend . . . . . . Thank you, and let us look forward! Unless you had other plans for the upcoming season, why not spend it investigating SmartView for your Essbase interaction needs. We hear that the days between Christmas and new year hold unlimited potential to test out new things. Or take it as a new year resolution: "I will switch to SmartView at the earliest possible moment".

  Read the article

• Updating password hashing without forcing a new password for existing users

  - by Willem

  You maintain an existing application with an established user base. Over time it is decided that the current password hashing technique is outdated and needs to be upgraded. Furthermore, for UX reasons, you don't want existing users to be forced to update their password. The whole password hashing update needs to happen behind the screen. Assume a 'simplistic' database model for users that contains: ID Email Password How does one go around to solving such a requirement? My current thoughts are: create a new hashing method in the appropriate class update the user table in the database to hold an additional password field Once a user successfully logs in using the outdated password hash, fill the second password field with the updated hash This leaves me with the problem that I cannot reasonable differentiate between users who have and those who have not updated their password hash and thus will be forced to check both. This seems horribly flawed. Furthermore this basically means that the old hashing technique could be forced to stay indefinitely until every single user has updated their password. Only at that moment could I start removing the old hashing check and remove the superfluous database field. I'm mainly looking for some design tips here, since my current 'solution' is dirty, incomplete and what not, but if actual code is required to describe a possible solution, feel free to use any language.

  Read the article

• Proof Identify stolen computer getting computer identification info from Launchpad bugs and comparing

  - by Kangarooo

  I sold my old laptop to neighbours and it was stolen from them. Well i think i have found thief so i want to check his computer id and compare it to my old Launchpad bugs id. How in Launchpad i can find from my bugs: Motherboard HDD Somthing else that can help identify it Maybe how to recover or find some overwritten files (couse now there is windows) I found in Launchpad one my bugs has LSPCI autogenerated from bug 682846 https://launchpadlibrarian.net/70611231/Lspci.txt but i dont see any id that can be used to identify specificly my comp. This can be used to identify many same models. Or i missed something in there? And what commands should i use to get all identification on that comp in one go fast? Just lspci? How to get same lspci as it is in that Launchpad link? Now testing laspci on my computer i dont get so much info. Also im now doing a search in my external hdd where i have many backups and maybe i have there result from lspci. So what containing keywords would help doing search with for small lspci and full reports ive done? I might have done sudo lshw somefilename

  Read the article

• ArchBeat Link-o-Rama for December 4, 2012

  - by Bob Rhubart

  Exalogic 2.0.1 Tea Break Snippets - Creating and using Distribution Groups | The Old Toxophilist "Although in many cases we, as Cloud Users, may not be to worried how the Virtualisation Algorithm decides where to place our vServers," says The Old Toxopholist, "there are cases where it is extremely important that vServers run on distinct physical compute nodes." There's plenty more on the subject in his blog post. Oracle Endeca (2.3) Record Level Security | Adam Seed Adam Sneed's blog post covers "the basics of security within Endeca Information Discovery, as these basic security objects are required in order to explain the implementation of record level security." ODI Handling DQ | Gurcan Orhan Oracle ACE Director Gurcan Orhan suggests you have fun with these scripts for Oracle Data Integrator. Parleys Testimonial at GlassFish Community Event - JavaOne 2012 Video of Parley's webmaster Stephan Janssen's presentation at the GlassFish Community Event at JavaOne 2012, in which he explains why Parley's moved from Tomcat to GlassFish. Java Spotlight Episode 109: Pete Muir on CDI 1.1 This edition of Roger Brinkley's Java Spotlight Podcast features an interview with CDI 1.1 spec lead Pete Muir of JBoss/Red Hat. Muir talks about the features in CDI 1.1 and what to expect in the future. Webcast: Java Management Extensions with Oracle WebLogic Server 12c Dr. Frank Munz and Dave Cabelus do the talking in this on-demand webcast focused on Oracle WebLogic Server 12c with Java Management Extensions (JMX). Using the Coherence API to get Portable Object Format bytes | Bruno Borges Bruno Borges shares a code snippet that illustrates how easy it is to use the Coherence API. Thought for the Day "Experience is something you don't get until just after you need it." — Anonymous Source: SoftwareQuotes.com

  Read the article

• How to migrate user settings and data to new machine?

  - by torbengb

  I'm new to Ubuntu and recently started using it on my PC. I'm going to replace that PC with a new machine. I want to transfer my data and settings to the nettop. What aspects should I consider? Obviously I want to move my data over. What things am I missing if I only copy the entire home folder? This is a home pc (not corporate) so user rights and other security issues are not a concern, except that the files should be accessible on the new machine! Please take into account that the new machine is a nettop that doesn't have an optical drive and doesn't allow me to hook the old SATA disk into it, so any data transfer must be handled via home network (I can have both the old and the new machine turned on and connected to the home LAN) and I have an USB thumbdrive with limited capacity (2GB). This sounds like it might limit the general applicability, but it would in fact make it more general. I'll make this a wiki topic because there could be several "right" answers. Update: Or so I thought. I don't see a choice for that.

  Read the article

• Scene graphs and spatial partitioning structures: What do you really need?

  - by tapirath

  I've been fiddling with 2D games for awhile and I'm trying to go into 3D game development. I thought I should get my basics right first. From what I read scene graphs hold your game objects/entities and their relation to each other like 'a tire' would be the child of 'a vehicle'. It's mainly used for frustum/occlusion culling and minimizing the collision checks between the objects. Spatial partitioning structures on the other hand are used to divide a big game object (like the map) to smaller parts so that you can gain performance by only drawing the relevant polygons and again minimizing the collision checks to those polygons only. Also a spatial partitioning data structure can be used as a node in a scene graph. But... I've been reading about both subjects and I've seen a lot of "scene graphs are useless" and "BSP performance gain is irrelevant with modern hardware" kind of articles. Also some of the game engines I've checked like gameplay3d and jmonkeyengine are only using a scene graph (That also may be because they don't want to limit the developers). Whereas games like Quake and Half-Life only use spatial partitioning. I'm aware that the usage of these structures very much depend on the type of the game you're developing so for the sake of clarity let's assume the game is a FPS like Counter-Strike with some better outdoor environment capabilities (like a terrain). The obvious question is which one is needed and why (considering the modern hardware capabilities). Thank you.

  Read the article

• How do I get my graphic card to work properly?

  - by Lucas

  I been having some problems with my graphic card for a time now. But I had enough when I did'nt get Oil Rush to work on my HP Pavilion g6. The system has suggested hardware drivers for me, but the first time I installed them they pretty much fucked up the graphics. After some time I managed to get the computere to work properly (I thought) again. When the game did'nt work I tried to the hardware drivers for the graphic card anyway. First of all there was to possible choices insted of one, as the last time I installed the drivers (when it did'nt work out so good). The choices are: ATI/AMDs proprietary video drivers FGLRX (update for edition) and Proprietary FGLRX-video drivers for ATI/AMD I realized the drivers probebly are pretty much the same, so I tried the first one. But this did'nt work. Instead I was asked to "Look in to /usr/var/log/jockey.log". This did'nt helped me much. Instead I choiced the other one, wich was installed and after reboot there where some changes. First of all there was a lot more details for Unity that was'nt there before and some shortkeys are now working that did'nt before (like Ctrl + T and the Prt Sc-button). But overall everything doesn't work as it used to. Like when you browse between the workspaces it doesn't look the same. To get to the point: it doesn't work well right now even if I got some things better and now will not Oil Rush (as I mentioned in the beginning) even start. SO! Can someone give me any advice with this? I'm stuck. Can't manage to see whats wrong right now. Any help? My graphic card is AMD Radeon HD 6470M.

  Read the article

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• Heading Out to Oracle Open World

  - by rickramsey

  In case you haven't figured it out by now, Oracle reserves an awful lot of announcements for Oracle Open World. As a result, the show is always a lot of fun for geeks. What will the Oracle Solaris team have to say? Will the Oracle Linux team have any surprises? And what about Oracle hardware? For my part, I'll be one of the lizards at the OTN Lounge with the OTN crew, handing out t-shirts to system admins and developers, or anyone who is willing to impersonate one. I understand, not everyone can have the raw animal magnetism of a sysadmin, or the debonair sophistication of a C++ developer, so some of you have no choice but to pretend. I won't judge. I'll also be doing video interviews of as many techie people as I can corner. I've got more than 30 interviews already scheduled. Most of them will be 3-5 minutes long. I'll be asking our best technical minds what's cool about their latest technologies and what impact it will have on system admins or system developers. I'll be posting those videos here: Find OTN Systems Videos from Oracle Open World Here! We've got some great topics in mind. A dummies guide to hardware-assisted cryptography with Glenn Brunette. ZFS deduplication. The momentum building around Oracle Solaris 11, with Lynn Rohrer, plus conversations with partners who have deployed Oracle Solaris 11. Migrating to Oracle Database with SQL Developer. The whole database cloud thing. Oracle VM and, of course, Oracle Linux. So even if you can't be part of the fun, keep an eye out for the videos on our YouTube channel. - Rick Website Newsletter Facebook Twitter

  Read the article

• Modelling work-flow plus interaction with a database - quick and accessible options

  - by cjmUK

  I'm wanting to model a (proposed) manufacturing line, with specific emphasis on interaction with a traceability database. That is, various process engineers have already mapped the manufacturing process - I'm only interested in the various stations along the line that have to talk to the DB. The intended audience is a mixture of project managers, engineers and IT people - the purpose is to identify: points at which the line interacts with the DB (perhaps going so far as indicating the Store Procs called at each point, perhaps even which parameters are passed.) the communication source (PC/Handheld device/PLC) the communication medium (wireless/fibre/copper) control flow (if leak test fails, unit is diverted to repair station) Basically, the model will be used as a focus different groups on outstanding tasks; for example, I'm interested in the DB and any front-end app needed, process engineers need to be thinking about the workflow and liaising with the PLC suppliers, the other IT guys need to make sure we have the hardware and comms in place. Obviously I could just improvise in Visio, but I was wondering if there was a particular modelling technique that might particularly suit my needs or my audience. I'm thinking of a visual model with supporting documentation (as little as possible, as much as is necessary). Clearly, I don't want something that will take me ages to (effectively) learn, nor one that will alienate non-technical members of the project team. So far I've had brief looks at BPMN, EPC Diagrams, standard Flow Diagrams... and I've forgotten most of what I used to know about UML... And I'm not against picking and mixing... as long as it is quick, clear and effective. Conclusion: In the end, I opted for a quasi-workflow/dataflow diagram. I mapped out the parts of the manufacturing process that interact with the traceability DB, and indicated in a significantly-simplified form, the data flows and DB activity. Alongside which, I have a supporting document which outlines each process, the data being transacted for each process (a 'data dictionary' of sorts) and details of hardware and connectivity required. I can't decide whether is a product of genius or a crime against established software development practices, but I do think that is will hit the mark for this particular audience.

  Read the article

• Why was my site rejected for Google Adsense?

  - by hyuun jjang

  I have a 3 year old blog and its got around 16 articles/tutorials about some programming problems and solutions. It's getting pretty much a lot of view lately so I decided to apply for a google adsense account. When I first applied via blogger, google replied with the following statement: Page Type: In order to participate in Google AdSense, publishers' websites and application information must satisfy the following guidelines: - Your website must be your own top-level domain (www.example.com and not www.example.com/mysite). - You must provide accurate personal information with your application that matches the information on your domain registration. - Your website must contain substantial, original content... So, as I understood it, I decide to buy a domain and point my blogger blog to that new naked domain. and here is the newly bought domain where all the contents of my old blog resides. http://icodeya.com/ I reapplied, hoping that this time, I will make the cut. But then I got this reply Further detail: Unable to review your site: While reviewing http://www.icodeya.com/, we found that your site was down or unavailable. We suggest you check whether there was a typo in the URL submitted. When your site is operational, you can resubmit your application with the correct site by following the directions below. I'm a bit disappointed. Maybe I did something wrong with DNS configuration or something. But you can clearly see that my site is fully functional. I heard that google sends robots to crawl on to the site etc. It's just sad because I invested on a domain name, and now I can't even find ways to earn from it. Any tips?

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• Importing tab delimited file into array in Visual Basic 2013 [migrated]

  - by JaceG

  I am needing to import a tab delimited text file that has 11 columns and an unknown number of rows (always minimum 3 rows). I would like to import this text file as an array and be able to call data from it as needed, throughout my project. And then, to make things more difficult, I need to replace items in the array, and even add more rows to it as the project goes on (all at runtime). Hopefully someone can suggest code corrections or useful methods. I'm hoping to use something like the array style sMyStrings(3,2), which I believe would be the easiest way to control my data. Any help is gladly appreciated, and worthy of a slab of beer. Here's the coding I have so far: Imports System.IO Imports Microsoft.VisualBasic.FileIO Public Class Main Dim strReadLine As String Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim sReader As IO.StreamReader = Nothing Dim sRawString As String = Nothing Dim sMyStrings() As String = Nothing Dim intCount As Integer = -1 Dim intFullLoop As Integer = 0 If IO.File.Exists("C:\MyProject\Hardware.txt") Then ' Make sure the file exists sReader = New IO.StreamReader("C:\MyProject\Hardware.txt") Else MsgBox("File doesn't exist.", MsgBoxStyle.Critical, "Error") End End If Do While sReader.Peek >= 0 ' Make sure you can read beyond the current position sRawString = sReader.ReadLine() ' Read the current line sMyStrings = sRawString.Split(New Char() {Chr(9)}) ' Separate values and store in a string array For Each s As String In sMyStrings ' Loop through the string array intCount = intCount + 1 ' Increment If TextBox1.Text <> "" Then TextBox1.Text = TextBox1.Text & vbCrLf ' Add line feed TextBox1.Text = TextBox1.Text & s ' Add line to debug textbox If intFullLoop > 14 And intCount > -1 And CBool((intCount - 0) / 11 Mod 0) Then cmbSelectHinge.Items.Add(sMyStrings(intCount)) End If Next intCount = -1 intFullLoop = intFullLoop + 1 Loop End Sub

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• Arrow ECS Oracle OpenWorld update

  - by mseika

  A date to mark in your diaries now! On Tuesday 23rd October will be holding our post Oracle OpenWorld Oracle. Covering all the important announcements from Oracle OpenWorld, this must attend event will be held in the Royal Exchange, London. The full agenda and speaker line up is being finalised but we will cover all the major strategy and product announcements from Oracle OpenWorld, FY 13 Channel Strategy and Partnering with Arrow ECS. Oracle OpenWorld a Channel Perspective, David Tweddle - Head of UK Alliance and Channel Hardware Announcements, Christopher Lindsay - Oracle Hardware EMEA Software Announcements, speaker to be confirmed Arrow ECS Focus and Strategy, Simon Rushbrook - Business Development Manager, Arrow ECS Summary and close, Nick Tinsley - Sales Director Who should attend? The event is subject Oracle NDA and is aimed at sales and pre-sales personal within your organisation. This event will commence at 12.30 with lunch, presentations will start at 1.30 and will close at 4.30 followed by drinks and networking. Full details to follow shortly but save the date and register now. Date & Time Tuesday 23rd October 201212.30pm - 4.30pm Post event drinks will be servedfrom 4.30pm Location London OfficeEntrance 2, Fourth Floor,The Royal Exchange,London, EC3V 3LN Click here for directions >

  Read the article

• Frustrated with MythTV 0.26

  - by Mike

  I've been using MythTV for a while now. Until a hardware crash I had a 0.25 box running without problems. Had to get new hardware and am now in the process of setting up 0.26. Every time I pick a menu option, it hangs for 1 minute. Every time I try to start the backend, same thing. I pick a new theme in the frontend, but it never gets used. I try to test audio, but all I get is static (from the proper channels though). I've setup the storage groups in the backend and put a video in /storage/videos but the front end won't see it when I scan for changes. I make changes in the front end configuration and they don't get saved (or get lost randomly 2-3 reloads later). Obviously there is something I am doing catastrophically wrong, but I have no idea what. Are the storage groups not working yet? Maybe I need to delete all the storage group entries and just use the front end override to set the path? I'm currently using lvm across 3 hard disks, and this has worked well for me in the past. I'd like to use storage groups, but frankly I don't see them working yet at all - especially not for videos (which is what we watch 99% of the time). Anyone have any suggestions for me to try before I just call 0.26 bad names and wipe the system?

  Read the article

• PHP safe_mode is a pain, looking for advice (Ubuntu 12.04 server, public webserver)

  - by user73279

  Maybe askUbuntu isn't the right forum or I haven't provided the right search query but I haven't seen anything in my searching of askUbuntu on PHP safe_mode. I get lots of Windows Safe Mode and Ubuntu Safe Mode results but not PHP safe_mode. So I keep running into one issue after another regarding PHP safe_mode. (I write a lot of my own PHP code for various site maintenance tools and such.) I know safe_mode is going away in the next version of PHP but I still see a fair amount of advice recommending that you leave it enabled. I've recently consolidated from 3 servers down to 1 and at least one of those old servers had safe_mode disabled without any issues. (The lack of issues may have simply been a matter of good luck.) None of the previous 3 gave me this much trouble so I'm guessing so additional php.ini/PHP safe_mode setting was turned on for the new server. I primarily run WordPress for my websites with a few MediaWiki sites sprinkled in. And I am currently running into an issue using WordPress's auto update feature as it doesn't seem to be able to use fopen. WordPress is not relaying the actual error message to me but since I was just able to update the plugins I'm using this is a safe_mode problem. I've had a lot of safe_mode issues since consolidating to this new server. Long story short, the advice I'd seen to use safe_mode was all at least 2 years old. Do I really need it? If I disable PHP safe_mode are there a good set of security measures I should implement - i.e. chmod 640 /var/www/..., add this to your .htaccess, etc - to protect my server/sites? Thanks

  Read the article

• Networking beim Vertriebsstammtisch

  - by A&C Redaktion

  Kennen Sie schon die Oracle Vertriebsstammtische? Mit dem neuen Format bieten wir unseren Partnern Networking in der reinster Form! Unsere Stammtische richten sich an alle Partner, die zuverlässige Informationen aus erster Hand möchten. Als Hersteller der weltweit umfassendsten Palette offener Unternehmenssoftware und Hardware bietet Oracle ein vollständiges Produktportfolio an. Diskutieren Sie mit uns über die gemeinsamen Chancen, die sich aus dem Ansatz „Engineered Systems“ und „Oracle on Oracle“ ergeben. Welche Synergien können wir erfolgreich gemeinsam nutzen, um den Markt zu erobern? Nehmen Sie teil und spüren Sie die Philosphie, die von den Teilnehmern unserer Partner gelebt werden soll. Im Anschluss an den fachlichen Teil laden wir Sie herzlich zum praktischen Teil des interaktiven Austausches ein! Die Teilnahme ist ausschließlich Oracle Partnern mit einer gültigen Oracle PartnerNetwork Mitgliedschaft vorbehalten und, unter Beachtung der aktuellen Teilnahmebedingungen, kostenlos. Agenda: 15:00-17:00 Alles zu den Software- und Hardware Produktneuheiten von der Oracle OpenWorld 17:00-17:30 Um 17:00 Uhr bitten wir alle Teilnehmer und Referenten, in eine Kochschule in direkter Nähe zu gehen/zu fahren - um dort den kulinarischen Part zu erleben: gemeinsam kochen, diskutieren und essen. 17:30-22:00 Der praktischen Teil dieses Vertriebsseminars findet in einer Kochlocation direkt im Anschluss statt.(Ihre Anmeldung gilt für das Vertriebsseminar und Ihre Teilnahme am praktischen Teil, dem Kochevent) Die nächsten Termine: 08.11.2012 bei Oracle in Düsseldorf mit anschließendem Abendessen19.11.2012 bei Oracle in Berlinmit anschließendem Abendessen28.11.2012 bei Oracle in Berlinmit anschließendem Abendessen

  Read the article

• Networking beim Vertriebsstammtisch

  - by A&C Redaktion

  Kennen Sie schon die Oracle Vertriebsstammtische? Mit dem neuen Format bieten wir unseren Partnern Networking in der reinster Form! Unsere Stammtische richten sich an alle Partner, die zuverlässige Informationen aus erster Hand möchten. Als Hersteller der weltweit umfassendsten Palette offener Unternehmenssoftware und Hardware bietet Oracle ein vollständiges Produktportfolio an. Diskutieren Sie mit uns über die gemeinsamen Chancen, die sich aus dem Ansatz „Engineered Systems“ und „Oracle on Oracle“ ergeben. Welche Synergien können wir erfolgreich gemeinsam nutzen, um den Markt zu erobern? Nehmen Sie teil und spüren Sie die Philosphie, die von den Teilnehmern unserer Partner gelebt werden soll. Im Anschluss an den fachlichen Teil laden wir Sie herzlich zum praktischen Teil des interaktiven Austausches ein! Die Teilnahme ist ausschließlich Oracle Partnern mit einer gültigen Oracle PartnerNetwork Mitgliedschaft vorbehalten und, unter Beachtung der aktuellen Teilnahmebedingungen, kostenlos. Agenda: 15:00-17:00 Alles zu den Software- und Hardware Produktneuheiten von der Oracle OpenWorld 17:00-17:30 Um 17:00 Uhr bitten wir alle Teilnehmer und Referenten, in eine Kochschule in direkter Nähe zu gehen/zu fahren - um dort den kulinarischen Part zu erleben: gemeinsam kochen, diskutieren und essen. 17:30-22:00 Der praktischen Teil dieses Vertriebsseminars findet in einer Kochlocation direkt im Anschluss statt.(Ihre Anmeldung gilt für das Vertriebsseminar und Ihre Teilnahme am praktischen Teil, dem Kochevent) Die nächsten Termine: 08.11.2012 bei Oracle in Düsseldorf mit anschließendem Abendessen19.11.2012 bei Oracle in Berlinmit anschließendem Abendessen28.11.2012 bei Oracle in Berlinmit anschließendem Abendessen

  Read the article

• ArchBeat Link-o-Rama for December 7, 2012

  - by Bob Rhubart

  From XaaS to Java EE – Which damn cloud is right for me in 2012? | Markus Eisele Oracle ACE Director Markus Eisele wrestles with a timely technical issue and shares his observations on several of the alternatives. WebLogic Servier Domain Browser App (Android) My colleague Jeff Davies, a frequent speaker at OTN Architect Day events and a genuinely nice guy, emailed me last night with this message: "I just came across this app on Google Play. It allows WebLogic administrators to browse WLS 12c domain information. I installed it on my phone and tried it out. Works very fast." I'm an iPhone guy, but I'm perfectly comfortable taking Jeff at his word.The app is called WLS Domain Browser. Follow the link for more info from the Google Play site. Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox | The Old Toxophilist "One of the main advantages of this is that Templates can be created away from the Exalogic Environment," explains The Old Toxophilist. BTW: I had to look it up: a toxophilist is one who collects bows and arrows. Thought for the Day "All models are wrong; some models are useful." — George Box Source: SoftwareQuotes.com

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >