Search Results

Search found 26869 results on 1075 pages for 'library design'.

Page 182/1075 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • iPhone static library Clang/LLVM error: non_lazy_symbol_pointers

    - by Bekenn
    After several hours of experimentation, I've managed to reduce the problem to the following example (C++): extern "C" void foo(); struct test { ~test() { } }; void doTest() { test t; // 1 foo(); // 2 } This is being compiled for iOS devices in XCode 4.2, using the provided Clang compiler (Apple LLVM compiler 3.0) and the iOS 5.0 SDK. The project is configured as a Cocoa Touch Static Library, and "Enable Linking With Shared Libraries" is set to No because I'm building an AIR native extension. The function foo is defined in another external library. (In my actual project, this would be any of the C API functions defined by Adobe for use in AIR native extensions.) When attempting to compile this code, I get back the error: FATAL:incompatible feature used: section type non_lazy_symbol_pointers (must specify "-dynamic" to be used) clang: error: assembler command failed with exit code 1 (use -v to see invocation) The error goes away if I comment out either of the lines marked 1 or 2 above, or if I change the build setting "Enable Linking With Shared Libraries" to Yes. (However, if I change the build setting, then I get multiple ld warning: unexpected srelocation type 9 warnings when linking the library into the final project, and the application crashes when running on the device.) The build error also goes away if I remove the destructor from test. So: Is this a bug in Clang? Am I missing some all-important and undocumented build setting? The interaction between an externally-provided function and a struct with a destructor is very peculiar, to say the least.

    Read the article

  • BlackBerry Library problems. (jre6 + NET_RIM_BLACKBERRY)

    - by kimera84
    Hi Everyone, I'm new in blackberry environement programming, I'm developing an application for this device and there are some probs about libraries that I don't understand. I have the main project called: npoBBerry - his library is NET_RIM_BLACKBERRY (from 4.6.1 version...) it includes other two projects: Npo - his library is standard jre6 (Npo inlcudes NpoCore) NpoCore - his library is standard jre6 Compliance was set... In Java Compiler level is set to 1.4 for all. Now the problem is that I'm not able to build my project. 4 errors: Error preverifying class ch.yek.npo.model.Advertising Error preverifying class ch.yek.npo.repository.Repository$1 Error!: Error: preverifier failed: C:\Program Files\eclipse\plugins\net.rim.eide.componentpack4.6.1_4.6.1.27\components\bin\preverify.ex ... Error!: Error: preverifier failed: C:\Program Files\eclipse\plugins\net.rim.eide.componentpack4.6.1_4.6.1.27\components\bin\preverify.ex ... I know that libraries are differents but maybe I'm missing something. NpoCore represents models, interfaces Npo just take data from a repository NpoBBeryy just use this data from Services... Please help and thanks in advance... :)

    Read the article

  • Something to convert audio to midi

    - by Katoss
    Hi, does anyone know something about some library (or freeware if you know one but I could'nt find one ..) to convert audio into midi ? I have looked but finded only shareware like this : http://www.widisoft.com/english/widi-audio-to-midi-au.html . (I'd like to convert my guitare playing into midi ...) Help would be much appreciated, Thank you !

    Read the article

  • GCC Dynamic library building problem

    - by Sirish Kumar
    I am new to linux, while compiling with dynamic library I am getting the segmentationfault error. I have two files ctest1.c void ctest1(int *i) { *i =10; } ctest2.c void ctest2(int *i) { *i =20; } I have compiled both files to a shared library named libtest.so using following command gcc -shared -W1,-soname,libtest.so.1 -o libtest.so.1.0.1 ctest1.o ctest2.o -lc And I have wrote another program prog.c which uses functions exported by this library prog.c #include void (ctest1)(int); void (ctest2)(int*); int main() { int a; ctest1(&a); printf("%d",a); return 0; } And when I have built the executable with following command gcc -Wall prog.c -L. -o prog But when I run the generated executable I get the SegmentationFault error. When I checked the header of prog with ldd it shows linux-vdso.so.1 = (0x00007f99dff000) libc.so.6 = /lib64/libc.so.6 (0x0007feeaa8c1000) /lib64/ld-linux-x86-64.so.2 (0x00007feeaac1c000) Can somebody tell what is the problem

    Read the article

  • Compiling and using NTL c++ library for Windows

    - by Martin Lauridsen
    Hi there, I have compiled the NTL inifite precision integer arithmetic library for c++, using Microsoft Visual Studio 2008. I did as explained, on this site, using the Visual Studio interface, rather than from the command prompt. Actually I would rather do it from the command prompt, but I was not sure how to. Anyhow, I got the library compiled, and I now want to compile a program using the library, from the command prompt. The program I am trying to compile, has been tested on a linux system, where I compile it with the following c++ -I/appl/htopopt/Linux_x86_64/NTL-5.4.2/include mpqs.cpp main.cpp -o main -L/appl/htopopt/Linux_x86_64/NTL-5.4.2/lib -lntl -L/appl/htopopt/Linux_x86_64/gmp-4.2.1/lib -lgmp -lm Nevermind the gmp stuff, I dont have that installed on Windows. It is purely an optional thing that will make the NTL run faster. Anyhow, this works fine on linux. Now on Windows I write the following cl /EHsc /I D:\Downloads\WinNTL-5_5_2\include mpqs.cpp main.cpp /link /LIBPATH:"D:\Documents\Visual Studio 2008\Projects\ntl\Debug" But this results in the following errors: mpqs.cpp mpqs.cpp(38) : error C2039: 'find_smooth_vals' : is not a member of 'QS' d:\desktop\qs\mpqs.h(12) : see declaration of 'QS' mpqs.cpp(41) : error C2065: 'M' : undeclared identifier mpqs.cpp(41) : error C2065: 'n' : undeclared identifier mpqs.cpp(42) : error C2065: 'sieve_table' : undeclared identifier mpqs.cpp(42) : error C2228: left of '.size' must have class/struct/union type is ''unknown-type'' mpqs.cpp(43) : error C2065: 'sieve_table' : undeclared identifier mpqs.cpp(44) : error C2065: 'qx_table' : undeclared identifier mpqs.cpp(44) : error C3861: 'test_smoothness': identifier not found mpqs.cpp(45) : error C2065: 'smooth_indices' : undeclared identifier mpqs.cpp(45) : error C2228: left of '.push_back' must have class/struct/union type is ''unknown-type'' main.cpp Generating Code... It is as if, my mpqs.h file is not included into the compilation process? Also I dont understand why it complains about .push_back() for a vector type? Help is much appreciated!

    Read the article

  • Is there stl and utf8 friendly C++ Wrapper for ICU, or other powerful unicode library

    - by artyom
    Hello, I need a good Unicode library for C++. I need Transformations in Unicode sensitive way. For example sort all strings in case insensitive way and get their first characters for index. Convert to upper and to lower various Unicode strings. Split text in reasonable position -- words that would work for Chinese and Japanese as well. Formatting numbers, dates in locale sensitive way (should be thread safe). Transparent support of utf8 (primary internal representation). As far as I know the best library is ICU. However, I can't find normal developer friendly API documentation with examples. Also as far as I see, it is not too friendly with modern C++ design, work with STL and so on. Like this std::string msg; unistring umsg.from_utf8(msg); unistring::word_iterator wi; for(wi=umsg.words().begin(),n=0;wi!=usmg.words().wi_end(),n<10;++wi,++n) ; msg=umsg.substr(umsg.words().begin(),wi).to_utf8(); cout<<_("Five 10 words are ")<<msg; Does anybody know good STL friendly ICU wrapper released under Open Source license preferred permissive like MIT or Boost, but others LGPLv2 compatible are ok as well. Is there another high quality library similar to ICU? Platform: UNIX/POSIX, Windows support is not required. Thanks, Artyom Edit: Unfortunatly I wasn't logged in so I can't make asnver accepted... I had attached the ansver by myself.

    Read the article

  • Static library not included in resulting LLVM executable

    - by Matthew Glubb
    Hi, I am trying to compile a c program using LLVM and I am having trouble getting some static libraries included. I have successfully compiled those static libraries using LLVM and, for example, libogg.a is present, as is ogg.l.bc. However, when I try to build the final program, it does not include the static ogg library. I've tried various compiler options with the most notable being: gcc oggvorbis.c -O3 -Wall -I$OV_DIR/include -l$OV_DIR/lib/libogg.a -l$OV_DIR/lib/libvorbis.a -o test.exe This results in the following output (directories shortened for brevity): $OV_DIR/include/vorbis/vorbisfile.h:75: warning: ‘OV_CALLBACKS_DEFAULT’ defined but not used $OV_DIR/include/vorbis/vorbisfile.h:82: warning: ‘OV_CALLBACKS_NOCLOSE’ defined but not used $OV_DIR/include/vorbis/vorbisfile.h:89: warning: ‘OV_CALLBACKS_STREAMONLY’ defined but not used $OV_DIR/include/vorbis/vorbisfile.h:96: warning: ‘OV_CALLBACKS_STREAMONLY_NOCLOSE’ defined but not used llvm-ld: warning: Cannot find library '$OV_DIR/lib/ogg.l.bc' llvm-ld: warning: Cannot find library '$OV_DIR/lib/vorbis.l.bc' WARNING: While resolving call to function 'main' arguments were dropped! I find this perplexing because $OV_DIR/lib/ogg.l.bc DOES exit, as does vorbis.l.bc and they are both readable (as are their containing directories) by everyone. Does anyone have any idea with what I am doing wrong? Thanks, Matt

    Read the article

  • Adding XOR function to bigint library

    - by Jason Gooner
    Hi, I'm using this Big Integer library for Javascript: http://www.leemon.com/crypto/BigInt.js and I need to be able to XOR two bigInts together and sadly the library doesn't include such a function. The library is relatively simple so I don't think it's a huge task, just confusing. I've been trying to hack one together but not having much luck, would be very grateful if someone could lend me a hand. This is what I've attempted (might be wrong). But im guessing the structure is going to be quite similar to some of the other functions in there. function xor(x, y) { var c, k, i; var result = new Array(0); // big int for result k=x.length>y.length ? x.length : y.length; // array length of the larger num // Make sure result is the correct array size? maybe: result = expand(result, k); // ? for (c=0, i=0; i < k; i++) { // Do some xor here } // return the bigint xor result return result; } What confuses me is I don't really understand how it stores numbers in the array blocks for the bigInt. I don't think it's a case of simply bigintC[i] = bigintA[i] ^ bigintB[i], then most other functions have some masking operation at the end that I don't understand. I would really appreciate any help getting this working. Thanks

    Read the article

  • MS Access (2010) Enable Design View

    - by Tim GONELLA
    I downloaded the Access template below for doing a home inventory: http://office.microsoft.com/en-us/templates/results.aspx?qu=home%20inventory&ex=1&queryid=0d245f2a%2Dacdc%2D4161%2D92c8%2D8ba16a52ab32&AxInstalled=1&c=0#ai:TC101918100| The design view is not visible, which is a bit of a nuisance. Things I've tried: 1) In options/options/current database/ the check boxes (enable layout view & enable design changes for tables in Datasheet view) are both greyed out. 2) I've unblocked the file using Right-Click-Properties. 3) I've tried copying/exporting the objects to another database. But can only copy/export the tables. 4) I've tried holding shift when opening the DB. 5) Enabling all trust permissions etc. None of these work Does anybody have any suggestions. (I'm using Office 2010) Thanks

    Read the article

  • Get Function Pointer to function in a shared library I didn't directly load

    - by bdk
    My Linux application (A) links against a Third Party shared Library (B) which I don't have source code to. This library makes use of another third party shared library that I don't have source code to (C). I believe that (B) uses dlopen to access (C) instead of directly linking. My reasoning for this is that 'ldd' on (B) does not show (C) and objdump -X (B) shows references to dlopen/dlclose/dlsym. My requirement is that I need to in my code for (A) get a function pointer to a function foo() located in (C). Normally I'd use dlsym for this, but I need to pass it the handle returned from dlopen which I don't have since (B) does not expose this. - For the larger context: I need to modify the function in (C) such that everytime it calls its helper function bar() (also located in (C)), it also calls a function with the same signature located in (A) with the same parameters (Basically inject my code into the codepath of (C) foo()-bar(). I believe I've found a way to accomplish this using gdb, but in order to port my gdb command list, but I'm stuck on the step of getting the function pointer. I'm also open to alternatives to accomplish the same task rather than the exact problem as stated above Edit: After writing this I realized I can probably just do another dlopen on the file in my code and the symbols returned via dlsym on that handle should be the same as received via the original dlopen, If I'm reading the dlopen man page correctly. However I'm still interested in advice or assistance with the my larger context, If theres a better way to go about this

    Read the article

  • How to bundle extension methods requiring configuration in a library

    - by Greg
    Hi, I would like to develop a library that I can re-use to add various methods involved in navigating/searching through a graph (nodes/relationships, or if you like vertexs/edges). The generic requirements would be: There are existing classes in the main project that already implement the equivalent of the graph class (which contains the lists of nodes / relationships), node class and relationship class (which links nodes together) - the main project likely already has persistence mechanisms for the info (e.g. these classes might be built using Entity Framework for persistance) Methods would need to be added to each of these 3 classes: (a) graph class - methods like "search all nodes", (b) node class - methods such as "find all children to depth i", c) relationship class - methods like "return relationship type", "get parent node", "get child node". I assume there would be a need to inform the library with the extending methods the class names for the graph/node/relationships table (as different project might use different names). To some extent it would need to be like how a generics collection works (where you pass the classes to the collection so it knows what they are). Need to be a way to inform the library of which node property to use for equality checks perhaps (e.g. if it were a graph of webpages the equality field to use might be the URI path) I'm assuming that using abstract base classes wouldn't really work as this would tie usage down to have to use the same persistence approach, and same class names etc. Whereas really I want to be able to, for a project that has "graph-like" characteristics, the ability to add graph searching/walking methods to it.

    Read the article

  • Design Web Templates

    - by Pradeep
    Hi, I am a PHP, VB.NET programmer and i like to build websites. I am good at coding but have never done website designing. Please suggest me some good study resource on Photoshop and flash website design. I have recently made few templates on photoshop but don't know how to code them for valid HTML-CSS. Please let me know which is the best method to design website template e.g. Photoshop, DreamWeaver etc. Also provide links to good study and practice resource for the same. Thanks in advance.

    Read the article

  • iTunes 9 not sorting albums by track order consistently

    - by joshhunt
    I have my iTunes library set to sort by music by Artist, then album (). For most of my albums this will also sort the albums in the correct track listing order (using the track number tag). Except for one album: As you can see, "The Boy Who Knew Too Much" seems to sort erratically. Why is this happening and how can I fix it?

    Read the article

  • Xlib.h and Xutil.h not found in Eclipse, how can I fix this?

    - by eclipseNoob
    Hi, I'm a newbie to Eclipse IDE for C/C++ development. I just installed MingW and set it up as my system's environment variable. I am trying to make an application that uses the X library but eclipse cant seem to find it. Eclipse works with any other simple standard library functions but it cant find the X library. Please Help! Here's a sample code snippet that's failing: #include <stdio.h> #include <X11/Xlib.h> // Can't find this #include <X11/Xutil.h> // Or this... int main() { printf("Hello"); return 0; } Do I have to download the X library from somewhere? If so then from where and where do I paste it to? Please tell me what to do in order for me to start coding using the Xlib in Eclipse. If you find any useful links, please dont hesitate to post. Thanks.

    Read the article

  • Database design - alternatives for Entity Attribute Value (AEV)

    - by Bob
    Hi, see http://stackoverflow.com/questions/695752/product-table-many-kinds-of-product-each-product-has-many-parameters for similar topic. My question: i want to design a database, that will be used for a production facility of different types of products where each product has its own (number of) parameters. because i want the serial numbers to be in one tabel for overview purposes i have a problem with these different paraeters . One solution could be AEV, but it has its downsides, certainly because we have +- 5 products with every product +- 20.000 serial numbers (records). it looks a bit overkill to me... I just don't know how one could design a database so that you have an attribute in a mastertable that says: 'hey, you could find details of this record in THAT detail-table". 'in a way that you qould easely query the results) currenty i am using Visual Basic & Acces 2007. but i'm going to Visual Basic & MySQL. thanks for your help. Bob

    Read the article

  • Hide struct definition in static library.

    - by BobMcLaury
    Hi, I need to provide a C static library to the client and need to be able to make a struct definition unavailable. On top of that I need to be able to execute code before the main at library initialization using a global variable. Here's my code: private.h #ifndef PRIVATE_H #define PRIVATE_H typedef struct TEST test; #endif private.c (this should end up in a static library) #include "private.h" #include <stdio.h> struct TEST { TEST() { printf("Execute before main and have to be unavailable to the user.\n"); } int a; // Can be modified by the user int b; // Can be modified by the user int c; // Can be modified by the user } TEST; main.c test t; int main( void ) { t.a = 0; t.b = 0; t.c = 0; return 0; } Obviously this code doesn't work... but show what I need to do... Anybody knows how to make this work? I google quite a bit but can't find an answer, any help would be greatly appreciated. TIA!

    Read the article

  • Bypassing Windows Copy design

    - by Scott S
    I have been trying to figure out a way to streamline copying files from one drive (network or external in my case) to my main system drives. Short of creating a program that I will have to activate each time then choosing all the info in it, I have no really good design to bypass it. I have been wondering if there was a way to intercept a straight-forward windows copy with a program to do it my way. The basic design would be that upon grabbing the copy (actually for this to be efficient, a group of different copies), the program would organize all the separate copies into a single stream of copies. I've been wanting to do this as recently I have been needing to make backups of a lot of data and move it a lot as all my drives seem to be failing the past few months.

    Read the article

  • Basic Client-Server Design for persistent connections?

    - by cam
    Here's as far as I understand it: Client & Server make connection Client sends server data Server interprets data, sends client data So on, and so forth, until client sends disconnect signal. I'm just wondering about implementation. Step 2 and 3 are confusing to me, maybe I'm over-complicating it. Is there anymore to interpreting the data than a giant switch statement? Any good books on client/server design? Specifically talking about multithreaded servers, scalability, and message design (byte 1 = header info, byte 2 = blah blah, etc)? Specifically geared towards C++.

    Read the article

  • CURL alternative - Design ideas

    - by Vincent
    All, I am looking for some web application design ideas here. I have a server X that hosts an SDK, which has the capacity to talk a piece of hardware. When I make an HTTPS request from an external PHP web application (hosted on Server Y) to Server X through curl, Server X gives JSON data as a response. I use this data to render my UI for the web app on Server Y. The above method seems to be slow and has a tendency to fail in production if there are too many concurrent requests. Can anybody let me know if there is an alternative to CURL or any other design people are using to pull data like this from servers? Thanks

    Read the article

  • how to redirect itunes to external hard drive

    - by oo
    i have all my music on my hard drive but its running out of space. i bought an external hard drive, copied all my music over i went into itunes advanced preferences and changed my music location but when i view the itunes music library XML file in notepad, i still see a lot of things pointing to my regular hard drive i didn't check "Keep music files organized" because i didn't want itunes trying to copy everything over from my regular hard drive (because i already did it) is there any other way to simply refresh the music list given a new root directory.

    Read the article

  • custom flex component, visual controls in design view

    - by bo
    Do you know how if you drag an <mx:Label> or <s:Label> component into your Flex project, when you go to design mode you get this panel on the right to set its properties like text etc. I have a custom component that I can call with actionscript, or with mxml like this: <comps:TheComp field1="OK" field2="Yes" /> The component takes this input and uses it for its internal operation private var field1:String; private var field2:String; private function initializeit() { // component takes the input and lays it out as needed } When I go to design mode, I can see the component under custom components, I can drag it to the stage and see it, but can't set its values field1 and field visually on the right like a normal <s:Label> or <mx:Label> would have. Any idea how I can add that? Do I need to make it inherit something or anything else

    Read the article

  • Design Stock Server Application in C++

    - by Avinash
    [Queston asked in ML Interview] Design an server/application which handle multiple incoming stock information ( stock symbol and values ) Server need to store the information in some cache ( need to design the data structure ), There are multiple client connected to server using tcp/ip socket. They will subscribe to particular request say stock symbol XYZ , and may be for more then one. As and when there is change the stock symbol server should broadcast the information to subscribed client. If tcp/ip write failed, server should handle the unregistration of the client. What various data structures will be used and how threading model will be ?

    Read the article

  • C# Design a class with interface?

    - by Haroon
    I am having a bit of trouble understanding how I will design a class. My class will have 3 methods ICollection<Field> GetFields(); //perform validation internally - return back the object T UpdateFields(ICollection<Field> fields); //pass in model object with values on it, set up fields, then pass back all fields ICollection<Field> GetFieldsWithValues(T object); What is the best way to construct/design such a class keeping in mind: 1. The model object I pass in will be one of 3 or 4 tables, however when I call GetFIelds - internally for each object I know what fields will be there i.e. list.add(new Field{name = "id", value = "5"}); list.add(new Field{name = "nameofcompany", value = "super guys"});

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >