Search Results

Search found 19964 results on 799 pages for 'daniel key'.

Page 185/799 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? To be clear: Within the windows/linux OS, all browsers work perfectly. Within mac only firefox works if it uses its internal certificate store and not the keychain. It's the keychain method of importing a certificate that causes the issue. Thus, all browsers using the keychain will not work. Root CA Cert: -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE----- Intermediate CA Cert: Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: C=*****, ST=*******, L=******, O=*******, CN=******/emailAddress=****** Validity Not Before: May 21 13:57:32 2014 GMT Not After : Jun 20 13:57:32 2014 GMT Subject: C=*****, ST=********, O=*******, CN=*******/emailAddress=******* Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (4096 bit) Modulus (4096 bit): 00:e7:2d:75:38:23:02:8e:b9:8d:2f:33:4c:2a:11: 6d:d4:f8:29:ab:f3:fc:12:00:0f:bb:34:ec:35:ed: a5:38:10:1e:f3:54:c2:69:ae:3b:22:c0:0d:00:97: 08:da:b9:c9:32:c0:c6:b1:8b:22:7e:53:ea:69:e2: 6d:0f:bd:f5:96:b2:d0:0d:b2:db:07:ba:f1:ce:53: 8a:5e:e0:22:ce:3e:36:ed:51:63:21:e7:45:ad:f9: 4d:9b:8f:7f:33:4c:ed:fc:a6:ac:16:70:f5:96:36: 37:c8:65:47:d1:d3:12:70:3e:8d:2f:fb:9f:94:e0: c9:5f:d0:8c:30:e0:04:23:38:22:e5:d9:84:15:b8: 31:e7:a7:28:51:b8:7f:01:49:fb:88:e9:6c:93:0e: 63:eb:66:2b:b4:a0:f0:31:33:8b:b4:04:84:1f:9e: d5:ed:23:cc:bf:9b:8e:be:9a:5c:03:d6:4f:1a:6f: 2d:8f:47:60:6c:89:c5:f0:06:df:ac:cb:26:f8:1a: 48:52:5e:51:a0:47:6a:30:e8:bc:88:8b:fd:bb:6b: c9:03:db:c2:46:86:c0:c5:a5:45:5b:a9:a3:61:35: 37:e9:fc:a1:7b:ae:71:3a:5c:9c:52:84:dd:b2:86: b3:2e:2e:7a:5b:e1:40:34:4a:46:f0:f8:43:26:58: 30:87:f9:c6:c9:bc:b4:73:8b:fc:08:13:33:cc:d0: b7:8a:31:e9:38:a3:a9:cc:01:e2:d4:c2:a5:c1:55: 52:72:52:2b:06:a3:36:30:0c:5c:29:1a:dd:14:93: 2b:9d:bf:ac:c1:2d:cd:3f:89:1f:bc:ad:a4:f2:bd: 81:77:a9:f4:f0:b9:50:9e:fb:f5:da:ee:4e:b7:66: e5:ab:d1:00:74:29:6f:01:28:32:ea:7d:3f:b3:d7: 97:f2:60:63:41:0f:30:6a:aa:74:f4:63:4f:26:7b: 71:ed:57:f1:d4:99:72:61:f4:69:ad:31:82:76:67: 21:e1:32:2f:e8:46:d3:28:61:b1:10:df:4c:02:e5: d3:cc:22:30:a4:bb:81:10:dc:7d:49:94:b2:02:2d: 96:7f:e5:61:fa:6b:bd:22:21:55:97:82:18:4e:b5: a0:67:2b:57:93:1c:ef:e5:d2:fb:52:79:95:13:11: 20:06:8c:fb:e7:0b:fd:96:08:eb:17:e6:5b:b5:a0: 8d:dd:22:63:99:af:ad:ce:8c:76:14:9a:31:55:d7: 95:ea:ff:10:6f:7c:9c:21:00:5e:be:df:b0:87:75: 5d:a6:87:ca:18:94:e7:6a:15:fe:27:dd:28:5e:c0: ad:d2:91:d3:2d:8e:c3:c0:9f:fb:ff:c0:36:7e:e2: d7:bc:41 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Alternative Name: DNS:localhost, DNS:dropbox.com, DNS:*.dropbox.com, DNS:filedropper.com, DNS:*.filedropper.com X509v3 Subject Key Identifier: F3:E5:38:5B:3C:AF:1C:73:C1:4C:7D:8B:C8:A1:03:82:65:0D:FF:45 X509v3 Authority Key Identifier: keyid:2B:37:39:7B:9F:45:14:FE:F8:BC:CA:E0:6E:B4:5F:D6:1A:2B:D7:B0 DirName:/C=****/ST=******/L=*******/O=*******/CN=******/emailAddress=******* serial:EE:8C:A3:B4:40:90:B0:62 X509v3 Basic Constraints: CA:TRUE Signature Algorithm: sha1WithRSAEncryption 46:2a:2c:e0:66:e3:fa:c6:80:b6:81:e7:db:c3:29:ab:e7:1c: f0:d9:a0:b7:a9:57:8c:81:3e:30:8f:7d:ef:f7:ed:3c:5f:1e: a5:f6:ae:09:ab:5e:63:b4:f6:d6:b6:ac:1c:a0:ec:10:19:ce: dd:5a:62:06:b4:88:5a:57:26:81:8e:38:b9:0f:26:cd:d9:36: 83:52:ec:df:f4:63:ce:a1:ba:d4:1c:ec:b6:66:ed:f0:32:0e: 25:87:79:fa:95:ee:0f:a0:c6:2d:8f:e9:fb:11:de:cf:26:fa: 59:fa:bd:0b:74:76:a6:5d:41:0d:cd:35:4e:ca:80:58:2a:a8: 5d:e4:d8:cf:ef:92:8d:52:f9:f2:bf:65:50:da:a8:10:1b:5e: 50:a7:7e:57:7b:94:7f:5c:74:2e:80:ae:1e:24:5f:0b:7b:7e: 19:b6:b5:bd:9d:46:5a:e8:47:43:aa:51:b3:4b:3f:12:df:7f: ef:65:21:85:c2:f6:83:84:d0:8d:8b:d9:6d:a8:f9:11:d4:65: 7d:8f:28:22:3c:34:bb:99:4e:14:89:45:a4:62:ed:52:b1:64: 9a:fd:08:cd:ff:ca:9e:3b:51:81:33:e6:37:aa:cb:76:01:90: d1:39:6f:6a:8b:2d:f5:07:f8:f4:2a:ce:01:37:ba:4b:7f:d4: 62:d7:d6:66:b8:78:ad:0b:23:b6:2e:b0:9a:fc:0f:8c:4c:29: 86:a0:bc:33:71:e5:7f:aa:3e:0e:ca:02:e1:f6:88:f0:ff:a2: 04:5a:f5:d7:fe:7d:49:0a:d2:63:9c:24:ed:02:c7:4d:63:e6: 0c:e1:04:cd:a4:bf:a8:31:d3:10:db:b4:71:48:f7:1a:1b:d9: eb:a7:2e:26:00:38:bd:a8:96:b4:83:09:c9:3d:79:90:e1:61: 2c:fc:a0:2c:6b:7d:46:a8:d7:17:7f:ae:60:79:c1:b6:5c:f9: 3c:84:64:7b:7f:db:e9:f1:55:04:6e:b5:d3:5e:d3:e3:13:29: 3f:0b:03:f2:d7:a8:30:02:e1:12:f4:ae:61:6f:f5:4b:e9:ed: 1d:33:af:cd:9b:43:42:35:1a:d4:f6:b9:fb:bf:c9:8d:6c:30: 25:33:43:49:32:43:a5:a8:d8:82:ef:b0:a6:bd:8b:fb:b6:ed: 72:fd:9a:8f:00:3b:97:a3:35:a4:ad:26:2f:a9:7d:74:08:82: 26:71:40:f9:9b:01:14:2e:82:fb:2f:c0:11:51:00:51:07:f9: e1:f6:1f:13:6e:03:ee:d7:85:c2:64:ce:54:3f:15:d4:d7:92: 5f:87:aa:1e:b4:df:51:77:12:04:d2:a5:59:b3:26:87:79:ce: ee:be:60:4e:87:20:5c:7f -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE-----

  Read the article

• Microsoft Enterprise Library Caching Application Block not thread safe?!

  - by AlanR

  Good aftenoon, I created a super simple console app to test out the Enterprise Library Caching Application Block, and the behavior is blaffling. I'm hoping I screwed something that's easy to fix in the setup. Have each item expire after 5 seconds for testing purposes. Basic setup -- "every second pick a number between 0 and 2. if the cache doesn't already have it, put it in there -- otherwise just grab it from the cache. Do this inside a LOCK statement to ensure thread safety. APP.CONFIG: <configuration> <configSections> <section name="cachingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Caching.Configuration.CacheManagerSettings, Microsoft.Practices.EnterpriseLibrary.Caching, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </configSections> <cachingConfiguration defaultCacheManager="Cache Manager"> <cacheManagers> <add expirationPollFrequencyInSeconds="1" maximumElementsInCacheBeforeScavenging="1000" numberToRemoveWhenScavenging="10" backingStoreName="Null Storage" type="Microsoft.Practices.EnterpriseLibrary.Caching.CacheManager, Microsoft.Practices.EnterpriseLibrary.Caching, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Cache Manager" /> </cacheManagers> <backingStores> <add encryptionProviderName="" type="Microsoft.Practices.EnterpriseLibrary.Caching.BackingStoreImplementations.NullBackingStore, Microsoft.Practices.EnterpriseLibrary.Caching, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Null Storage" /> </backingStores> </cachingConfiguration> </configuration> C#: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Practices.EnterpriseLibrary.Common; using Microsoft.Practices.EnterpriseLibrary.Caching; using Microsoft.Practices.EnterpriseLibrary.Caching.Expirations; namespace ConsoleApplication1 { class Program { public static ICacheManager cache = CacheFactory.GetCacheManager("Cache Manager"); static void Main(string[] args) { while (true) { System.Threading.Thread.Sleep(1000); // sleep for one second. var key = new Random().Next(3).ToString(); string value; lock (cache) { if (!cache.Contains(key)) { cache.Add(key, key, CacheItemPriority.Normal, null, new SlidingTime(TimeSpan.FromSeconds(5))); } value = (string)cache.GetData(key); } Console.WriteLine("{0} --> '{1}'", key, value); //if (null == value) throw new Exception(); } } } } OUPUT -- How can I prevent the cache to returning nulls? 2 --> '2' 1 --> '1' 2 --> '2' 0 --> '0' 2 --> '2' 0 --> '0' 1 --> '' 0 --> '0' 1 --> '1' 2 --> '' 0 --> '0' 2 --> '2' 0 --> '0' 1 --> '' 2 --> '2' 1 --> '1' Press any key to continue . . . Thanks in advance, -Alan.

  Read the article

• Cannot import the following keyfile: blah.pfx. The keyfile may be password protected.

  - by JasonD

  We just upgraded our Visual Studio 2008 projects to VS2010. All of our assemblies were strong signed using a Verisign code signing certificate. Since the upgrade we continuously get the following error: Cannot import the following key file: companyname.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the following key container name: VS_KEY_3E185446540E7F7A This happens on some developer machines and not others. Some methods used to fix this that worked some of the time include: re-installing the key file from Windows Explorer (right click on the PFX file and click Install) installing VS2010 on a fresh machine for the first time prompts you for the password the first time you open the project, and then it works. On machines upgraded from VS2008, you don't get this option. I've tried using the SN.EXE utility to register the key with the Strong Name CSP as the error message suggests, but whenever I run the tool with any options using the version that came with VS2010, SN.EXE just lists its command line arguments instead of doing anything. This happens regardless of what arguments I supply. Does anyone know WHY this is happening, and have clear steps to fix it? I'm about to give up on Click Once installs and Microsoft Code Signing. Thanks for any help!

  Read the article

• Java Plist XML Parsing

  - by Jannis

  Hello everyone, I'm parsing a (not well formed) Apple Plist File with java. My Code looks like this: InputStream in = new FileInputStream( "foo" ); XMLInputFactory factory = XMLInputFactory.newInstance(); XMLEventReader parser = factory.createXMLEventReader( in ); while (parser.hasNext()){ XMLEvent event = parser.nextEvent(); //code to navigate the nodes } The parts I"m parsing are looking like this: <dict> <key>foo</key><integer>123</integer> <key>bar</key><string>Boom &amp; Shroom</string> </dict> My problem is now, that nodes containing a ampersand are not parsed like they should because the ampersand is representing a entity. What can i do to get the value of the node as a complete String, instead of broken parts? Thank you in advance.

  Read the article

• Bug Triage

  In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

  Read the article

• Quartz.Net Writing your first Hello World Job

  - by Tarun Arora

  In this blog post I’ll be covering, 01: A few things to consider before you should schedule a Job using Quartz.Net 02: Setting up your solution to use Quartz.Net API 03: Quartz.Net configuration 04: Writing & scheduling a hello world job with Quartz.Net If you are new to Quartz.Net I would recommend going through, A brief introduction to Quartz.net Walkthrough of Installing & Testing Quartz.Net as a Windows Service A few things to consider before you should schedule a Job using Quartz.Net - An instance of the scheduler service - A trigger - And last but not the least a job For example, if I wanted to schedule a script to run on the server, I should be jotting down answers to the below questions, a. Considering there are multiple machines set up with Quartz.Net windows service, how can I choose the instance of Quartz.Net where I want my script to be run b. What will trigger the execution of the job c. How often do I want the job to run d. Do I want the job to run right away or start after a delay or may be have the job start at a specific time e. What will happen to my job if Quartz.Net windows service is reset f. Do I want multiple instances of this job to run concurrently g. Can I pass parameters to the job being executed by Quartz.Net windows service Setting up your solution to use Quartz.Net API 1. Create a new C# Console Application project and call it “HelloWorldQuartzDotNet” and add a reference to Quartz.Net.dll. I use the NuGet Package Manager to add the reference. This can be done by right clicking references and choosing Manage NuGet packages, from the Nuget Package Manager choose Online from the left panel and in the search box on the right search for Quartz.Net. Click Install on the package “Quartz” (Screen shot below). 2. Right click the project and choose Add New Item. Add a new Interface and call it ‘IScheduledJob.cs’. Mark the Interface public and add the signature for Run. Your interface should look like below. namespace HelloWorldQuartzDotNet { public interface IScheduledJob { void Run(); } }   3. Right click the project and choose Add new Item. Add a class and call it ‘Scheduled Job’. Use this class to implement the interface ‘IscheduledJob.cs’. Look at the pseudo code in the implementation of the Run method. using System; namespace HelloWorldQuartzDotNet { class ScheduledJob : IScheduledJob { public void Run() { // Get an instance of the Quartz.Net scheduler // Define the Job to be scheduled // Associate a trigger with the Job // Assign the Job to the scheduler throw new NotImplementedException(); } } }   I’ll get into the implementation in more detail, but let’s look at the minimal configuration a sample configuration file for Quartz.Net service to work. Quartz.Net configuration In the App.Config file copy the below configuration <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="quartz" type="System.Configuration.NameValueSectionHandler, System, Version=1.0.5000.0,Culture=neutral, PublicKeyToken=b77a5c561934e089" /> </configSections> <quartz> <add key="quartz.scheduler.instanceName" value="ServerScheduler" /> <add key="quartz.threadPool.type" value="Quartz.Simpl.SimpleThreadPool, Quartz" /> <add key="quartz.threadPool.threadCount" value="10" /> <add key="quartz.threadPool.threadPriority" value="2" /> <add key="quartz.jobStore.misfireThreshold" value="60000" /> <add key="quartz.jobStore.type" value="Quartz.Simpl.RAMJobStore, Quartz" /> </quartz> </configuration>   As you can see in the configuration above, I have included the instance name of the quartz scheduler, the thread pool type, count and priority, the job store type has been defined as RAM. You have the option of configuring that to ADO.NET JOB store. More details here. Writing & scheduling a hello world job with Quartz.Net Once fully implemented the ScheduleJob.cs class should look like below. I’ll walk you through the details of the implementation… - GetScheduler() uses the name of the quartz.net and listens on localhost port 555 to try and connect to the quartz.net windows service. - Run() an attempt is made to start the scheduler in case it is in standby mode - I have defined a job “WriteHelloToConsole” (that’s the name of the job), this job belongs to the group “IT”. Think of group as a logical grouping feature. It helps you bucket jobs into groups. Quartz.Net gives you the ability to pause or delete all jobs in a group (We’ll look at that in some of the future posts). I have requested for recovery of this job in case the quartz.net service fails over to the other node in the cluster. The jobType is “HelloWorldJob”. This is the class that would be called to execute the job. More details on this below… - I have defined a trigger for my job. I have called the trigger “WriteHelloToConsole”. The Trigger works on the cron schedule “0 0/1 * 1/1 * ? *” which means fire the job once every minute. I would recommend that you look at www.cronmaker.com a free and great website to build and parse cron expressions. The trigger has a priority 1. So, if two jobs are run at the same time, this trigger will have high priority and will be run first. - Use the Job and Trigger to schedule the job. This method returns a datetime offeset. It is possible to see the next fire time for the job from this variable. using System.Collections.Specialized; using System.Configuration; using Quartz; using System; using Quartz.Impl; namespace HelloWorldQuartzDotNet { class ScheduledJob : IScheduledJob { public void Run() { // Get an instance of the Quartz.Net scheduler var schd = GetScheduler(); // Start the scheduler if its in standby if (!schd.IsStarted) schd.Start(); // Define the Job to be scheduled var job = JobBuilder.Create<HelloWorldJob>() .WithIdentity("WriteHelloToConsole", "IT") .RequestRecovery() .Build(); // Associate a trigger with the Job var trigger = (ICronTrigger)TriggerBuilder.Create() .WithIdentity("WriteHelloToConsole", "IT") .WithCronSchedule("0 0/1 * 1/1 * ? *") // visit http://www.cronmaker.com/ Queues the job every minute .WithPriority(1) .Build(); // Assign the Job to the scheduler var schedule = schd.ScheduleJob(job, trigger); Console.WriteLine("Job '{0}' scheduled for '{1}'", "", schedule.ToString("r")); } // Get an instance of the Quartz.Net scheduler private static IScheduler GetScheduler() { try { var properties = new NameValueCollection(); properties["quartz.scheduler.instanceName"] = "ServerScheduler"; // set remoting expoter properties["quartz.scheduler.proxy"] = "true"; properties["quartz.scheduler.proxy.address"] = string.Format("tcp://{0}:{1}/{2}", "localhost", "555", "QuartzScheduler"); // Get a reference to the scheduler var sf = new StdSchedulerFactory(properties); return sf.GetScheduler(); } catch (Exception ex) { Console.WriteLine("Scheduler not available: '{0}'", ex.Message); throw; } } } }   The above highlighted values have been taken from the Quartz.config file, this file is available in the Quartz.net server installation directory. Implementation of my HelloWorldJob Class below. The HelloWorldJob class gets called to execute the job “WriteHelloToConsole” using the once every minute trigger set up for this job. The HelloWorldJob is a class that implements the interface IJob. I’ll walk you through the details of the implementation… - context is passed to the method execute by the quartz.net scheduler service. This has everything you need to pull out the job, trigger specific information. - for example. I have pulled out the value of the jobKey name, the fire time and next fire time. using Quartz; using System; namespace HelloWorldQuartzDotNet { class HelloWorldJob : IJob { public void Execute(IJobExecutionContext context) { try { Console.WriteLine("Job {0} fired @ {1} next scheduled for {2}", context.JobDetail.Key, context.FireTimeUtc.Value.ToString("r"), context.NextFireTimeUtc.Value.ToString("r")); Console.WriteLine("Hello World!"); } catch (Exception ex) { Console.WriteLine("Failed: {0}", ex.Message); } } } }   I’ll add a call to call the scheduler in the Main method in Program.cs using System; using System.Threading; namespace HelloWorldQuartzDotNet { class Program { static void Main(string[] args) { try { var sj = new ScheduledJob(); sj.Run(); Thread.Sleep(10000 * 10000); } catch (Exception ex) { Console.WriteLine("Failed: {0}", ex.Message); } } } }   This was third in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering how to pass parameters to the scheduled task scheduled on Quartz.net windows service. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

  Read the article

• IF adding new Entity gives error me : EntityCommandCompilationException was unhandled bu user code

  - by programmerist

  i have 5 tables in started projects. if i adds new table (Urun enttiy) writing below codes: project.BAL : public static List<Urun> GetUrun() { using (GenoTipSatisEntities genSatisUrunCtx = new GenoTipSatisEntities()) { ObjectQuery<Urun> urun = genSatisUrunCtx.Urun; return urun.ToList(); } } if i receive data form BAL in UI.aspx: using project.BAL; namespace GenoTip.Web.ContentPages.Satis { public partial class SatisUrun : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { FillUrun(); } } void FillUrun() { ddlUrun.DataSource = SatisServices.GetUrun(); ddlUrun.DataValueField = "ID"; ddlUrun.DataTextField = "Ad"; ddlUrun.DataBind(); } } } i added URun later. error appears ToList method: EntityCommandCompilationException was unhandled bu user code error Detail: Error 1 Error 3007: Problem in Mapping Fragments starting at lines 659, 873: Non-Primary-Key column(s) [UrunID] are being mapped in both fragments to different conceptual side properties - data inconsistency is possible because the corresponding conceptual side properties can be independently modified. C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 660 15 GenoTip.DAL Error 2 Error 3012: Problem in Mapping Fragments starting at lines 659, 873: Data loss is possible in FaturaDetay.UrunID. An Entity with Key (PK) will not round-trip when: (PK does NOT play Role 'FaturaDetay' in AssociationSet 'FK_FaturaDetay_Urun' AND PK is in 'FaturaDetay' EntitySet) C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 874 11 GenoTip.DAL Error 3 Error 3012: Problem in Mapping Fragments starting at lines 659, 873: Data loss is possible in FaturaDetay.UrunID. An Entity with Key (PK) will not round-trip when: (PK is in 'FaturaDetay' EntitySet AND PK does NOT play Role 'FaturaDetay' in AssociationSet 'FK_FaturaDetay_Urun' AND Entity.UrunID is not NULL) C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 660 15 GenoTip.DAL Error 4 Error 3007: Problem in Mapping Fragments starting at lines 748, 879: Non-Primary-Key column(s) [UrunID] are being mapped in both fragments to different conceptual side properties - data inconsistency is possible because the corresponding conceptual side properties can be independently modified. C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 749 15 GenoTip.DAL Error 5 Error 3012: Problem in Mapping Fragments starting at lines 748, 879: Data loss is possible in Satis.UrunID. An Entity with Key (PK) will not round-trip when: (PK does NOT play Role 'Satis' in AssociationSet 'FK_Satis_Urun' AND PK is in 'Satis' EntitySet) C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 880 11 GenoTip.DAL Error 6 Error 3012: Problem in Mapping Fragments starting at lines 748, 879: Data loss is possible in Satis.UrunID. An Entity with Key (PK) will not round-trip when: (PK is in 'Satis' EntitySet AND PK does NOT play Role 'Satis' in AssociationSet 'FK_Satis_Urun' AND Entity.UrunID is not NULL) C:\Users\pc\Desktop\GenoTip.Satis\GenoTip.DAL\ModelSatis.edmx 749 15 GenoTip.DAL

  Read the article

• Unable to validate data. at System.Web.Configuration.MachineKeySection.GetDecodedData

  - by Ben Williams

  I have several websites which get approximately 3000 pageviews in total per day, and I get this viewstate error roughly 5-10 times per day, caught in global.asax: System.Web.HttpException: Unable to validate data. at System.Web.Configuration.MachineKeySection.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) at System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) I have tried: hard-coding the machine key in web.config for all websites hard-coding the machien key in machine.config adding items to the pages section of the web.config for all websites. Machine key looks like: <machineKey validationKey="key goes here" decryptionKey="key goes here" validation="SHA1" decryption="AES" /> Pages section looks like: <pages renderAllHiddenFieldsAtTopOfForm="true" validateRequest="false" enableEventValidation="false" viewStateEncryptionMode="Never"> The errors are not related to application pool recycling as best I can tell, as the pool is set to recycle at every 100,000 requests. I am not running a web farm or web garden. Quite often I get two or three of these errors in a row, as if a user is getting an error, going back, and then clicking the link again. Anyone have any ideas?

  Read the article

• "Parallel Programming Talk" show

  Over at the Intel Software Network Aaron Tersteeg runs a "Parallel Programming Talk" audio show on which I was invited as a guest (for the 55th episode) to talk about Microsoft's parallelism offerings in Visual Studio 2010. The call started at 7:45AM, so if my voice sounds croaky to you, now you know why ;)Check out the 20-minute chat (and related hyperlinks) on Aaron's blog. Comments about this post welcome at the original blog.

  Read the article

• GPGPU

  WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

  Read the article

• Visual Basic Cryptography Question

  - by Glenn Sullivan

  I am trying to mimic the results of some C code that uses the OpenSSL library using the system.security.crytography library in the .net 3.5 world, and I can't seem to get it right. I need some help... part of the issue is my understanding of crytography in general. Here's what is supposed to happen: I send a request for authentication to a device. It returns a challenge digest, which I then need to sign with a known key and return The device returns a "success" or "Fail" message. I have the following code snippet that I am trying to "copy": //Seed the PRNG //Cheating here - the PRNG will be seeded when we create a key pair //The key pair is discarded only doing this to seed the PRNG. DSA *temp_dsa = DSA_new(); if(!temp_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } unsigned char seed[20] = "Our Super Secret Key"; temp_dsa = DSA_generate_parameters(128, seed, sizeof(seed), NULL, NULL, NULL, NULL); DSA_free(temp_dsa); //A pointer to the private key. p = (unsigned char *)&priv_key; //Create and allocate a DSA structure from the private key. DSA *priv_dsa = NULL; priv_dsa = d2i_DSAPrivateKey(NULL, &p, sizeof(priv_key)); if(!priv_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } //Allocate memory for the to be computed signature. sigret = OPENSSL_malloc(DSA_size(priv_dsa)); //Sign the challenge digest recieved from the ISC. retval = DSA_sign(0, pResp->data, pResp->data_length, sigret, &siglen, priv_dsa); A few more bits of information: priv_key is a 252 element character array of hex characters that is included. The end result is a 512 (or less) array of characters to send back for validation to the device. Rasmus asked to see the key array. Here it is: unsigned char priv_key[] = {0x30, 0x81, 0xf9, 0x02, 0x01, 0x00, 0x02, 0x41, 0x00, 0xfe, 0xca, 0x97, 0x55, 0x1f, 0xc0, 0xb7, 0x1f, 0xad, 0xf0, 0x93, 0xec, 0x4b, 0x31, 0x94, 0x78, 0x86, 0x82, 0x1b, 0xab, 0xc4, 0x9e, 0x5c, 0x40, 0xd9, 0x89, 0x7d, 0xde, 0x43, 0x38, 0x06, 0x4f, 0x1b, 0x2b, 0xef, 0x5c, 0xb7, 0xff, 0x21, 0xb1, 0x11, 0xe6, 0x9a, 0x81, 0x9a, 0x2b, 0xef, 0x3a, 0xbb, 0x5c, 0xea, 0x76, 0xae, 0x3a, 0x8b, 0x92, 0xd2, 0x7c, 0xf1, 0x89, 0x8e, 0x4d, 0x3f, 0x0d, 0x02, 0x15, 0x00, 0x88, 0x16, 0x1b, 0xf5, 0xda, 0x43, 0xee, 0x4b, 0x58, 0xbb, 0x93, 0xea, 0x4e, 0x2b, 0xda, 0xb9, 0x17, 0xd1, 0xff, 0x21, 0x02, 0x41, 0x00, 0xf6, 0xbb, 0x45, 0xea, 0xda, 0x72, 0x39, 0x4f, 0xc1, 0xdd, 0x02, 0xb4, 0xf3, 0xaa, 0xe5, 0xe2, 0x76, 0xc7, 0xdc, 0x34, 0xb2, 0x0a, 0xd8, 0x69, 0x63, 0xc3, 0x40, 0x2c, 0x58, 0xea, 0xa6, 0xbd, 0x24, 0x8b, 0x6b, 0xaa, 0x4b, 0x41, 0xfc, 0x5f, 0x21, 0x02, 0x3c, 0x27, 0xa9, 0xc7, 0x7a, 0xc8, 0x59, 0xcd, 0x5b, 0xdd, 0x6c, 0x44, 0x48, 0x86, 0xd1, 0x34, 0x46, 0xb0, 0x89, 0x55, 0x50, 0x87, 0x02, 0x41, 0x00, 0x80, 0x29, 0xc6, 0x4a, 0x08, 0x3e, 0x30, 0x54, 0x71, 0x9b, 0x95, 0x49, 0x55, 0x17, 0x70, 0xc7, 0x96, 0x65, 0xc8, 0xc2, 0xe2, 0x8a, 0xe0, 0x5d, 0x9f, 0xe4, 0xb2, 0x1f, 0x20, 0x83, 0x70, 0xbc, 0x88, 0x36, 0x03, 0x29, 0x59, 0xcd, 0xc7, 0xcd, 0xd9, 0x4a, 0xa8, 0x65, 0x24, 0x6a, 0x77, 0x8a, 0x10, 0x88, 0x0d, 0x2f, 0x15, 0x4b, 0xbe, 0xba, 0x13, 0x23, 0xa1, 0x73, 0xa3, 0x04, 0x37, 0xc9, 0x02, 0x14, 0x06, 0x8e, 0xc1, 0x41, 0x40, 0xf1, 0xf6, 0xe1, 0xfa, 0xfb, 0x64, 0x28, 0x02, 0x15, 0xce, 0x47, 0xaa, 0xce, 0x6e, 0xfe}; Can anyone help me translate this code to it's VB.net crypto equivalent? TIA, Glenn

  Read the article

• GAE Datastore Put()

  - by Ivan Slaughter

  def post(self): update = self.request.get('update') if users.get_current_user(): if update: personal = db.GqlQuery("SELECT * FROM Personal WHERE __key__ = :1", db.Key(update)) personal.name = self.request.get('name') personal.gender = self.request.get('gender') personal.mobile_num = self.request.get('mobile_num') personal.birthdate = int(self.request.get('birthdate')) personal.birthplace = self.request.get('birthplace') personal.address = self.request.get('address') personal.geo_pos = self.request.get('geo_pos') personal.info = self.request.get('info') photo = images.resize(self.request.get('img'), 0, 80) personal.photo = db.Blob(photo) personal.put() self.redirect('/admin/personal') else: personal= Personal() personal.name = self.request.get('name') personal.gender = self.request.get('gender') personal.mobile_num = self.request.get('mobile_num') personal.birthdate = int(self.request.get('birthdate')) personal.birthplace = self.request.get('birthplace') personal.address = self.request.get('address') personal.geo_pos = self.request.get('geo_pos') personal.info = self.request.get('info') photo = images.resize(self.request.get('img'), 0, 80) personal.photo = db.Blob(photo) personal.put() self.redirect('/admin/personal') else: self.response.out.write('I\'m sorry, you don\'t have permission to add this LP Personal Data.') Should this will update the existing record if the 'update' is querystring containing key datastore key. I try this but keep adding new record/entity. Please give me some sugesstion to correctly updating the record/entity. Correction? : def post(self): update = self.request.get('update') if users.get_current_user(): if update: personal = Personal.get(db.Key(update)) personal.name = self.request.get('name') personal.gender = self.request.get('gender') personal.mobile_num = self.request.get('mobile_num') personal.birthdate = int(self.request.get('birthdate')) personal.birthplace = self.request.get('birthplace') personal.address = self.request.get('address') personal.geo_pos = self.request.get('geo_pos') personal.info = self.request.get('info') photo = images.resize(self.request.get('img'), 0, 80) personal.photo = db.Blob(photo) personal.put() self.redirect('/admin/personal') else: personal= Personal() personal.name = self.request.get('name') personal.gender = self.request.get('gender') personal.mobile_num = self.request.get('mobile_num') personal.birthdate = int(self.request.get('birthdate')) personal.birthplace = self.request.get('birthplace') personal.address = self.request.get('address') personal.geo_pos = self.request.get('geo_pos') personal.info = self.request.get('info') photo = images.resize(self.request.get('img'), 0, 80) personal.photo = db.Blob(photo) personal.put() self.redirect('/admin/personal') else: self.response.out.write('I\'m sorry, you don\'t have permission to add this LP Personal Data.')

  Read the article

• Using MVC2 to update an Entity Framework v4 object with foreign keys fails

  - by jbjon

  With the following simple relational database structure: An Order has one or more OrderItems, and each OrderItem has one OrderItemStatus. Entity Framework v4 is used to communicate with the database and entities have been generated from this schema. The Entities connection happens to be called EnumTestEntities in the example. The trimmed down version of the Order Repository class looks like this: public class OrderRepository { private EnumTestEntities entities = new EnumTestEntities(); // Query Methods public Order Get(int id) { return entities.Orders.SingleOrDefault(d => d.OrderID == id); } // Persistence public void Save() { entities.SaveChanges(); } } An MVC2 app uses Entity Framework models to drive the views. I'm using the EditorFor feature of MVC2 to drive the Edit view. When it comes to POSTing back any changes to the model, the following code is called: [HttpPost] public ActionResult Edit(int id, FormCollection formValues) { // Get the current Order out of the database by ID Order order = orderRepository.Get(id); var orderItems = order.OrderItems; try { // Update the Order from the values posted from the View UpdateModel(order, ""); // Without the ValueProvider suffix it does not attempt to update the order items UpdateModel(order.OrderItems, "OrderItems.OrderItems"); // All the Save() does is call SaveChanges() on the database context orderRepository.Save(); return RedirectToAction("Details", new { id = order.OrderID }); } catch (Exception e) { return View(order); // Inserted while debugging } } The second call to UpdateModel has a ValueProvider suffix which matches the auto-generated HTML input name prefixes that MVC2 has generated for the foreign key collection of OrderItems within the View. The call to SaveChanges() on the database context after updating the OrderItems collection of an Order using UpdateModel generates the following exception: "The operation failed: The relationship could not be changed because one or more of the foreign-key properties is non-nullable. When a change is made to a relationship, the related foreign-key property is set to a null value. If the foreign-key does not support null values, a new relationship must be defined, the foreign-key property must be assigned another non-null value, or the unrelated object must be deleted." When debugging through this code, I can still see that the EntityKeys are not null and seem to be the same value as they should be. This still happens when you are not changing any of the extracted Order details from the database. Also the entity connection to the database doesn't change between the act of Getting and the SaveChanges so it doesn't appear to be a Context issue either. Any ideas what might be causing this problem? I know EF4 has done work on foreign key properties but can anyone shed any light on how to use EF4 and MVC2 to make things easy to update; rather than having to populate each property manually. I had hoped the simplicity of EditorFor and DisplayFor would also extend to Controllers updating data. Thanks

  Read the article

• DirectCompute

  In my previous blog post I introduced the concept of GPGPU ending with:On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the Direct X API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as "kernel".In this post I want to share some links to get you started with DirectCompute and HLSL.1. Watch the recording of the PDC 09 session: DirectX11 DirectCompute.2. If session recordings is your thing there are two more on DirectCompute from nvidia's GTC09 conference 1015 (pdf, mp4) and 1411 (mp4 plus the presenter's written version of the session).3. Over at gamedev there is an old Compute Shader tutorial. At the same site, there is a 3-part blog post on Compute Shader: Introduction, Resources and Addressing.4. From PDC, you can also download the DirectCompute Hands On Lab.5. When you are ready to get your hands even dirtier, download the latest Windows DirectX SDK (at the time of writing the latest is dated Feb 2010).6. Within the SDK you'll find a Compute Shader Overview and samples such as: Basic, Sort, OIT, NBodyGravity, HDR Tone Mapping.7. Talking of DX11/DirectCompute samples, there are also a couple of good ones on this URL.8. The documentation of the various APIs is available online. Here are just some good (but far from complete) taster entry points into that: numthreads, SV_DispatchThreadID, SV_GroupThreadID, SV_GroupID, SV_GroupIndex, D3D11CreateDevice, D3DX11CompileFromFile, CreateComputeShader, Dispatch, D3D11_BIND_FLAG, GSSetShader. Comments about this post welcome at the original blog.

  Read the article

• Recreating OMS instances in a HA environment when instances on all nodes are lost

  - by rnigam

  Oracle highly recommends deploying EM in a HA environment. The best practices for HA deployments, backup and housekeeping of your Enterprise Manager environment are documented in the Oracle Enterprise Manager Advanced Configuration Guide. It is imperative that there is a good disaster recovery plan in place for your EM deployment. In this post I want to talk about a customer who failed to do the correct planning and housekeeping for EM and landed in a situation where we the all the OMSes were nearly blown away had we not jumped to help. We recently hit an issue at a customer site where we had a two node OMS setup of the Enterprise Manager and a RAC Database being used as the EM repository. An accidental delete of the OMS oracle home left us with a single node deployment. While we were trying to figure out a possible path to recover the first node, the second node was rebooted under a maintenance window. What followed was a complete site outage as the Admin and managed servers would not start on either of the nodes. In my situation there were - No backups of the Oracle Homes from any node - No OMS Configuration snapshots (created using the “emctl exportconfig oms” command) and the instance home was completely lost on node 1 which also had the Admin Server  We did however have: - A copy of the emkey.ora that I found under the OMS_ORACLE_HOME/ of the second node (NOTE: it is a bad practice to have your emkey present under the OMS Oracle home directory on the same server as the OMS. The backup of the emkey should be maintained on some other server. In this case however it was a savior in my situation since there were no backups - The oms oracle home on the second node but missing a number of files and had a number of changes done to the files in the home. There were a number of attempts to start the server by modifying various files based on the Weblogic server logs to have atleast node up and running but all of them failed. Here is how you can recover from this scenario: Follow these steps: STEP 1: Check status of emkey.ora Check whether the emkey exists is present in the EM repository or not. Run the following command: $OMS_ORACLE_HOME/bin/emctl status emkey If the output is something like this below then you are good to go and the key is present in the repository ./emctl status emkey Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. Enter Enterprise Manager Root (SYSMAN) Password : The EMKey is configured properly. Here are the messages that you might see as the emctl status emkey output depending upon whether the EM Admin Server is up and if the key is configured properly: Case1:  AdminServer is up, emkey is proper in CredStore & not in repos. This is same as the output of the command shown above:The EMKey is configured properly Case 2: AdminServer is up, emkey is proper in CredStore & exists in repos:The EMKey is configured properly, but is not secure. Secure the EMKey by running "emctl config emkey -remove_from_repos".Case 3: AdminServer is down or emkey is corrupted in CredStore) & (emkey exists in repos): The EMKey exists in the Management Repository, but is not configured properly or is corrupted in the credential store.Configure the EMKey by running "emctl config emkey -copy_to_credstore".Case 4: (AdminServer is down or emkey is corrupted in CredStore) & (emkey does not exist in repos): The EMKey is not configured properly or is corrupted in the credential store and does not exist in the Management Repository. To correct the problem:1) Get the backed up emkey.ora file.2) Configure the emkey by running "emctl config emkey -copy_to_credstore_from_file". If not the key was not secured properly, we will have to be put in the repository before proceeding. Look at the next step 2 for doing this There may be cases (like mine) where running emctl may give errors like the following: $OMS_ORACLE_HOME/bin/emctl status emkey Exception in thread “Main Thread” java.lang.NoClassDefFoundError: oracle/security/pki/OracleWallet At oracle.sysman.emctl.config.oms.EMKeyCmds.main (EMKeyCmds.java:658) Just move to the next step to put the key back in the repository STEP 2: Put emkey.ora back in the repository Skip this step if your emkey.ora is present in the repository. If not, you need to put the key back in the repository See if you can run the following command (with sample output): $OMS_ORACLE_HOME/bin/emctl config emkey –copy_to_repos Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. The EMKey has been copied to the Management Repository. This operation will cause the EMKey to become unsecure. After the required operation has been completed, secure the EMKey by running "emctl config emkey -remove_from_repos". Typically the key is present under $OMS_ORACLE_HOME/sysman/config directory before being removed after the install as a best practice. If you hit any errors while running emctl commands like the one mentioned in step 1, jump to step 3 and we will take care of the emkey.ora in Step 5 STEP 3: Get the port information Check for the existing port information in the emd.properties file under EM_INSTANCE_DIRECTORY (typically gc_inst directory right above the Middleware home where you have deployed em. For eg. /u01/app/oracle/product/gc_inst in case your oms home is /u01/app/oracle/product/Middleware/oms11g) In my case I got the information from the emgc.properties present in the gc_inst on the second node. If you can run emctl you may want to try the following command as well $OMS_ORACLE_HOME/bin/emctl status oms –details Note this information as this will be used in the next step STEP 4: Perform cleanup on Node 1 Note the oracle home of the Weblogic and OMS, get the list of applied patches in the homes (using opatch lsinventory command), take a backup copy of the home just in case we need it and then de-install/remove oracle homes, update inventory and cleanup processes on the first node STEP 5: Perform Software Only Installation of OMS on Node 1 Perform Weblogic 10.3.2 installation exactly under the same location as present in the earlier installation. Perform software only installation of the OMS using the following command. This will not run any configuration assistants and bypass all user interface validations runInstaller –noconfig -validationaswarnings Select the “Additional OMS” option while performing the installation. Provide the same path for OMS and Instance directories like the previous installation Use the port information collected in Step 3 while performing the installation. Once the installation is complete run the allroot.sh script to complete the binary deployment STEP 6: Apply one-off patches At this point you can apply any patches to the OMS Oracle Home previously. You only need to run opatch to install the patch in the home and not required to run the SQLs STEP 7: Copy EM key This step is only required if you were not able to use emctl command to put the emkey back into the EM repository in STEP 2 Copy the emkey.ora file of the old installation you have under $OMS_ORACLE_HOME/sysman/config directory of the newly installed OMS STEP 8: Configure Grid Control Domain Run the following command to configure the EM domain and OMS. Note that you need to use a different GC Domain name than what you used earlier. For example I have used GCDOMAIN11 as the new domain name when my previous domain name was GCDOMAIN $OMS_ORACLE_HOME/bin/omsca new –AS_USERNAME weblogic –EM_DOMAIN_NAME GCDOMAIN11 –NM_USER nodemanager -nostart This command as shown below will prompt for a number of inputs like Admin Server hostname, port, password, etc. Verify if the defaults shown are correct by pressing enter or provide a new value STEP 9: Run Add-ON Configuration Assistant After this step run the following add-on configuration assistant. This was used in my case to configure the virtualization add-on $OMS_ORACLE_HOME/addonca -oui -omsonly -name vt -install gc STEP 10: Start the OMS Now start the OMS using $OMS_ORACLE_HOME/bin/emctl start oms In a multi-node setup like mine you would either have a software load balancer or DNS round robin (using a virtual host name that resolves to one of multiple OMS hostnames) being used for load balancing. Secure the OMS against the SLB or DNS virtual hostname using the following $ OMS_HOME/bin/emctl secure oms -host slb.example.com -secure_port 1159 -slb_port 1159 -slb_console_port 443 STEP 11: Configure the Agent From the $AGENT_ORACLE_HOME/bin run the ./agentca –f At this point you should have your OMS on node 1 fully re-covered. Clean up node 2 and use the normal Additional OMS installation process documented in the official installation guide to add the additional OMS on node 2 Summary It took us nearly a little over two days to completely recover the environment with some other non-EM related issues that hit us along the way as well. In the end a situation like this could have been completely avoided had the proper housekeeping and backup of the Enterprise Manager Deployment been done in the first place. This is going to a topic that we cover in the next post. In the meantime please do refer to the Oracle Enterprise Manager Advanced Configuration Guide for planning your EM installation, backup and housekeeping procedures. This can be found here: http://download.oracle.com/docs/cd/E11857_01/index.htm Thanks This post would not have been possible without Raj Aggarwal, Prasad Chebrolu and Ravikumar Basa who helped to recover the environment and provided all the support we needed

  Read the article

• jQuery getJson returning null

  - by Adam

  I'm trying to use this api that lets you reference an exact text, but the getJson does not seem to be working, it's just returning null. $.getJSON('http://api.biblia.com/v1/bible/content/KJV.json?key=MYAPIKEY=John+3:16-18&style=bibleTextOnly', function(data) { alert(data); }); I just took the key out, i've been testing it with my real api key, and it works fine when i just visit the url. is there anything else i need to do to make it work? This is what you get from the url when you have an api key in the url: {"text":"For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. For God sent not his Son into the world to condemn the world; but that the world through him might be saved. He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God."}

  Read the article

• Best of "The Moth" 2009

  Not wanting to break the tradition (2004, 2005, 2006, 2007, 2008) below are some blog posts I picked from my blogging last year. As you can see by comparing with the links above, 2009 marks my lowest output yet with only 64 posts, but hopefully the quality has not been lowered ;-) 1. Parallel Computing was a strong focus of course. You can find links to most of that content aggregated in the post where I shared my entire parallelism session. Related to that was the link to the screencast I shared of the Parallel Computing Features Tour.2. Parallel Debugging is obviously part of the parallel computing links above, but I created more in depth content around that area of Visual Studio 2010 since it is the one I directly own. I aggregated all the links to that content in my post: Parallel Debugging.3. High Performance Computing through clusters is an area I'll be focusing more next year (besides parallelism on a single node on the client captured above) and I started introducing the topic on my blog this year. Read the (currently) 6 posts bottom up from my category on HPC.4. Windows 7 Task Manager. In April I shared a screenshot which was the most "borrowed" item from my blog (I should have watermarked it ;-)5. Windows Phone non-support in VS2010. Did my bit to spread clarification of the story.6. Window positions in Visual Studio is a long post, but one that I strongly advise all VS users to read and benefit from.7. Bug Triage gives you a glimpse into one thing all (Microsoft) product teams do.If you haven't yet, you can subscribe via one of the options on the left. Either way, thank you for staying tuned… Happy New Year! Comments about this post welcome at the original blog.

  Read the article

• Even if GridView.DataKeyNames is set, Gridview.DataKeys[] is still empty

  - by JustTryingToLearn

  hi GridView.DataKeynames stores the names of the primary key fields for the items displayed in a GridView control. 1) Even though I’ve set DataKeyNames, GridView still doesn’t store record’s primary key value(s) in DataKey object: protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e) { Label2.Text = GridView2.DataKeys[0].Value.ToString();//exception } Why not? 2) I assume when DataKeyNames is set, DataKey object stores both original and new values of a primary key ( assuming we issued an update command ) and when the update is finished, DataKey object discards the original value(s)? Thank you

  Read the article

• Windows HPC Server links

  I've already described how to setup a Windows HPC Server for development. Before you dive into developing for the cluster, if you are new to this it is probably a good idea to learn the basics by reading some overview material. Below is a list of links.Direct Links to Windows HPC content1. Windows HPC Server 2008 Overview Datasheet (4 page pdf).2. Windows HPC Server 2008 Technical Overview (32 page doc).3. Windows HPC Server 2008 Getting Started Guide (26 page doc) which actually is available online as part of the TechNet technical library section on Windows HPC Server 2008, which includes much more useful data.4. Windows HPC Server 2008 Job Scheduler (38 page doc).5. Windows HPC Server 2008 Job Templates (56 page doc).6. Developing for the Windows HPC Server 2008 Platform (16 page doc or pdf version).Windows HPC sites7. Windows HPC Forums.8. HPC Developer Resources.9. Windows HPC Server 2008 Resource Kit - Developer.10. Windows HPC Server 2008 - TechNet.11. The Windows HPC Team Blog.HPC Course12. High-Performance Computing Fundamentals Course (pluralisight)13. Classic HPC Development using Visual C++ (course slides and materials in a ZIP). Author's blog post.14. From sequential to parallel code (course slides and materials in a ZIP). Author's blog post. Next time I will post resources specific to the most popular programming models for the cluster today: MPI and Cluster SOA - until then, happy reading! Comments about this post welcome at the original blog.

  Read the article

• Castle ActiveRecord "Could not compile the mapping document: (string)"

  - by Nick

  Hi I am having getting an exception when trying to initialize ActiveRecord and I cannot figure out what I am missing. I am trying to convince the company I work for to use Castle ActiveRecord and it won't look good if I can't demonstrate how it works. I have work on projects before with Castle ActiveRecord and I had never experience this problem before. Thanks for your help The exception that I get is Stack Trace: at Castle.ActiveRecord.ActiveRecordStarter.AddXmlString(Configuration config, String xml, ActiveRecordModel model) at Castle.ActiveRecord.ActiveRecordStarter.AddXmlToNHibernateCfg(ISessionFactoryHolder holder, ActiveRecordModelCollection models) at Castle.ActiveRecord.ActiveRecordStarter.RegisterTypes(ISessionFactoryHolder holder, IConfigurationSource source, IEnumerable`1 types, Boolean ignoreProblematicTypes) at Castle.ActiveRecord.ActiveRecordStarter.Initialize(IConfigurationSource source, Type[] types) at ConsoleApplication1.Program.Main(String[] args) in C:\Projects\CastleDemo\ConsoleApplication1\Program.cs:line 20 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() Inner Exception: {"Could not compile the mapping document: (string)"} Below is my configuration file: <add key="connection.driver_class" value="NHibernate.Driver.SqlClientDriver" /> <add key="dialect" value="NHibernate.Dialect.MsSql2000Dialect" /> <add key="connection.provider" value="NHibernate.Connection.DriverConnectionProvider" /> <add key="connection.connection_string" value="Data Source=SPIROS\SQLX;Initial Catalog=CastleDemo;Integrated Security=SSPI" /> <add key="proxyfactory.factory_class" value="NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle" /> and this is the main method that runs the initialization: static void Main(string[] args) { //Configure ActiveRecord source XmlConfigurationSource source = new XmlConfigurationSource("../../config.xml"); // //Initialazi ActiveRecord ActiveRecordStarter.Initialize( source, typeof(Product)); // //Create Schema ActiveRecordStarter.CreateSchema(); // }

  Read the article

• writing NSDictionary to plist

  - by ADude

  Hi I'm trying to write an NSDictionary to a plist but when I open the plist no data has been written to it. From the log my path looks correct and my code is pretty standard. Any ideas? NSArray *keys = [NSArray arrayWithObjects:@"key1", @"key2", @"key3", nil]; NSArray *objects = [NSArray arrayWithObjects:@"value1", @"value2", @"value3", nil]; NSDictionary *dictionary = [NSDictionary dictionaryWithObjects:objects forKeys:keys]; for (id key in dictionary) { NSLog(@"key: %@, value: %@", key, [dictionary objectForKey:key]); } NSString *path = [[NSBundle mainBundle] pathForResource:@"FormData" ofType:@"plist"]; NSLog(@"path:%@", path); [dictionary writeToFile:path atomically:YES];

  Read the article

• Reserve RAM in C

  - by petersmith221

  Hi I need ideas on how to write a C program that reserve a specified amount of MB RAM until a key [ex. the any key] is pressed on a Linux 2.6 32 bit system. * /.eat_ram.out 200 # If free -m is execute at this time, it should report 200 MB more in the used section, than before running the program. [Any key is pressed] # Now all the reserved RAM should be released and the program exits. * It is the core functionality of the program [reserving the RAM] i do not know how to do, getting arguments from the commandline, printing [Any key is pressed] and so on is not a problem from me. Any ideas on how to do this?

  Read the article

• Reserve RAM in C

  - by petersmith221

  Hi I need ideas on how to write a C program that reserve a specified amount of MB RAM until a key [ex. the any key] is pressed on a Linux 2.6 32 bit system. * /.eat_ram.out 200 # If free -m is execute at this time, it should report 200 MB more in the used section, than before running the program. [Any key is pressed] # Now all the reserved RAM should be released and the program exits. * It is the core functionality of the program [reserving the RAM] i do not know how to do, getting arguments from the commandline, printing [Any key is pressed] and so on is not a problem from me. Any ideas on how to do this?

  Read the article

• UIKeyBoard resize on orientation change to landscape

  - by Dave

  This is very rookie question. I have a UIToolBar at the bottom which is supposed to animatedly move up and down with key board when the UIKeyBoard is displayed. I got that working with the help of UIKeyBoard Notifications. The view we are talking about has split view enabled. When device orientation is landscape, both the views as columns are shown [hope that makes sense]. When key board is shown, i do this CGSize keyBoardSize = [[notificationInfo objectForKey:UIKeyboardFrameEndUserInfoKey]CGRectValue].size; CGRect toolbarFrame= [BottomToolBar frame]; toolbarFrame.origin.y -= keyBoardSize.height; [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.3]; BottomToolBar .frame = viewFrame; [UIView commitAnimations]; when key board is hiiden i do this toolbarFrame.origin.y += keyBoardSize.height; My Problem is when device orientation changes to landscape, when the key board is visible the bottom tool bar is gone. I see it move up quickly. I am not sure how to fix this. Can anyone help please? Also, is there a way to NOT make the key board span across both the views in the split view?

  Read the article

• Jquery Uploadify checkscript

  - by Kevin McPhail

  I am trying to implement the checkscript feature of uploadify in an asp.net mvc view but i can't determine what the key is i should be using on the controller side. Below is the php script but i am not very familiar with php and can't determine what php is scraping out of the httprequest. Has anyone implemented this? The documentation is a little sparse (as in nonexistent). $fileArray = array(); foreach ($_POST as $key => $value) { if ($key != 'folder') { if (file_exists($_SERVER['DOCUMENT_ROOT'] . $_POST['folder'] . '/' . $value)) { $fileArray[$key] = $value; } } } echo json_encode($fileArray); ?>

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >