Search Results

Search found 100067 results on 4003 pages for 'sql server analysis servi'.

Page 185/4003 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

  • sql server 2008 cluster hang when a heavy load is run

    - by Billy OT
    we have a sql server 2008 active/active cluster running on wondows 2008R2 O/S. 14GB RAM, 4xCPU. we have set a ceiling of 12GB for sql server. We're running an agent job which loads 3 million records to a database. during this load the job fails and the cluster seems to attempt to fail over to the other node but unsuccessfully i.e., the cluster address is no longer accessible. we have to manually fail the cluster node back. during the load on viewing task manager we can see that memory usage hits a max of 12.5GB and CPU at times hits 100% on all 4 CPU, but for the most part fluctuates at an average of about 60%. I suppose my question is, will a cluster try to fail over if memory or CPU are taking a heavy hit? or am i barking up the wrong tree? also any ideas why it wouldn't fully fail over? we've crawled through logs, of which there are a lot, and can't find anything useful. we've also tried recreating the issue but it ran successfully at a later time. Also 3 million rows doesn't seem like a lot but in terms of resources should 14GB RAM and 4xCPU not be sufficient? Further information on this, we ran the load again today and corrupted the database! We received the error message : LogWriter: Operating system error 170. It looks like, under the heavy load, the sql cluster attempted to fail over and in doing so migrated a lun (or drive) which meant the disk was no longer reachable. (this is just our theory). The database is now 'suspect' and requiring restoration. The 170 error above also indicates that on failing over to the other node, the sql service could not start as it was already in use, therefore it couldn't fail over fully?? But I'm wondering why would it need to fail over in the first place? My assumptions could be completely wrong on this, so any ideas would be appreciated.

    Read the article

  • Login failed for user 'XXX' on the mirrored sql server

    - by hp17
    We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

    Read the article

  • Server Core remote management from Windows 7 machine

    - by Robert Koritnik
    I've installed Remote Server Administration Tools for Windows 7 because I would like to administer my Windows Server 2008 R2 Server Core machine. The problem that I'm getting when I try to run Server Manager is: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. This is what I've done so far: I'm running WinRM service on both machines (Server and Window 7) I've added my server to trusted hosts on my Windows 7 machine: winrm set winrm/config/client @{TrustedHosts="WINSRV2"} I've added registry entry on Windows 7 machine: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f I've enabled Remote Management inbound rule on server firewall using CoreConfigurator 2.0 both machines are in the same subnet and when I search for network machines on Windows 7 I see my server. Question What else should I do to make it work? I would like to run several different remote management tools against my server machine.

    Read the article

  • SQL transaction log backups conflicting with full backups?

    - by BradC
    On our SQL servers (2000, 2005, and 2008), we run full backups once a day in the evening, and transaction log backups every 2 hrs. We haven't really worried about these two processes conflicting, but lately we've run into some of the following issues: On one server, the trans log backup occasionally blocks the full backup, and must be manually stopped before the full backup can complete We sometimes end up with a massively-sized trans log backup file (sometimes larger than the full backup!) that seems to occur at the same time the full backup is running. I found a reference that indicate that these are "not allowed" to run at the same time, whatever that means: SQL 2000 Books Online and SQL 2005 Books Online. I'm not sure whether that means that the server will simply prevent them from running simultaneously, or if we ought to be explicitly stopping the log backups while the full backups are running. So are there known conflicts/issues between these? Does the answer differ between SQL versions? Should I have the trans log backup job check to see if the full backup is running before it executes? (and how do I do that...?)

    Read the article

  • Auto-start the SQL Server Agent after a computer restart

    - by Dreas Grech
    I am using the SQL Server Agent to run some jobs every day, but the problem is that whenever the server (the machine itself) is restarted, the SQL Server Agent doesn't automatically start when the computer boots back up again...and I have to start it manually myself. How can I set the Server Agent to Auto-Start after a computer restart? Is there a particular Windows Service I need to set as auto-start ?

    Read the article

  • Make Apache Ignore Domains on the Same Server (Ubuntu 9.10). How?

    - by vladikoff
    Hello, I'm running Apache on Ubuntu 9.10. I want Apache to ignore certain domains on my server, and let other HTTP servers make full use of them. I've used mod_proxy and other Apache modules to configure the proxy/redirect to certain ports but sometimes that's too much work or doesn't work properly. Example: Server 00.00.000.000 domain1.com:80 - Apache domain2.com:80 - Apache domain3.com:80 - Webrick domain4.com:80 - Jetty Is this possible?

    Read the article

  • Upgrade MS Sql Report Server 08 for Dundas charts

    - by hadi
    Hi, We have ms sql server 2008, however the new dundas charts are not available on the report server. How do I upgrade the report server so it gets the new dundas charts as well. Dundas charts are a part of Microsoft charts now in the new version of the report server. Your help would be greatly appreciated

    Read the article

  • OSX Server 3, Mac clients binding to OD and Profile Manager failing

    - by dbf
    I've made a setup containing a Mac Mini with OSX Server 3 (Mavericks 10.9.2) using Open Directory and Profile Manager (Mail, etc all set up and working). Now the thing is, internally on the local network, everything works great. Clients can bind to the OD and the users are able to login. I can install trust and settings profiles (either custom or group profiles) and all services in the profiles mentioned are being configured correctly. I can log in and out, hump around and do it a 100 times on different macs with different users, it works. My goal is to make this service publicly. The domain is with a FQDN which I own, for simplicity let's say server.domain.com. Now the only way for me to bind the clients to the OD is using LDAP mapping RCF2307 (without SSL) and a DN suffix of dc=server,dc=domain,dc=com using the Directory Utility. The options from server, or open directory will throw several errors like Connection failed to node '/LDAPv3/server.domain.com (2100). First of all I don't really understand the problem why clients can't bind to the OD like it does locally, with and without SSL (all ports are open, literally all ports are open, not just 389,636 and 1640, wasn't sure if I was missing any). When the clients are using LDAP mapping RFC2307 to bind (without SSL only), clients are able to authenticate, login and even load the Trust profile. But every Settings profile will fail with a Debug Message: Unable to find GUID in user record OD or fail to install saying missing user identification. Is there any way to get this to work without RFC2307? Because there is quite some stuff missing when using RFC2307 and not pull the mapping from the server or use open directory. Is this setup even possible? Or should I use VPN to authenticate with the OD? The network setup is a Modem/Router (DHCP off) with WAN NATted to an Airport Extreme (Using DHCP+NAT). The AE does notify with a double NAT message but I haven't had any problems with it on any other service. So WAN - 192.168.2.220 (static), AE - 10.0.1.* (dhcp) Output of DIG from the outside using dig server.domain.com ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 77 IN A 91.50.*.* (valid WAN IP) ;; SERVER 172.*.*.1#53(172.*.*.1) (iPhone) DIG locally from a client and server (same output) ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 10800 IN A 10.0.1.11 ;; AUTHORITY SECTION: server.domain.com. 10800 IN NS domain.com. (used for email send in relay) server.domain.com. 10800 IN NS server.domain.com. ;; SERVER 10.0.1.11#53(10.0.1.11) Are there any things I should check? Only have OSX. -- double NAT issue, plugged in the server directly on the Modem/Router with a static IP and issue remains. Guess that rules out the double NAT thing. -- changeip -checkhostname comes with There is nothing to change, e.g. success. Primary address = 10.0.1.11 Current HostName = server.domain.com DNS HostName = server.domain.com For now, I've made a workaround by using an admin account that forces a permanent VPN connection on boot. That means before it comes to the login, a connection is already made or underway. I will continue this post when I have more time, also locating all the necessary .log files of each application involved. I have some suspicions but have to debug a bit more when I have more time on my hands .. Unless, of course, I get sidetracked with having a life. Which is arguably not very likely. krypted.com

    Read the article

  • Can't create add a SQL Server user: The login already has an account under a different user name.

    - by Zian Choy
    Environment: SQL Server 2005 Express Windows 7 When I installed SQL Server, I followed the instructions at http://msdn.microsoft.com/en-us/library/aa905868.aspx to set my computer's admin account as the SQL Server admin. However, when I try to access a database on my computer through Visual Studio 2008, I get the following error message: --------------------------- Microsoft Visual Studio --------------------------- The database 'Parkinsons' does not exist or you do not have permission to see it. Would you like to attempt to create it? --------------------------- Yes No --------------------------- Then, if I go to SQL Server and add a user to that database, I get the following error message: TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Create failed for User 'zian'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+User&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ The login already has an account under a different user name. (Microsoft SQL Server, Error: 15063) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=15063&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ Why doesn't VS piggy back on the dbo account? If the dbo account is unusable, then why won't SQL Server let me make an account so that I can access my own data?

    Read the article

  • SQL Server Database In Single User Mode after Failover

    - by jlichauc
    Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

    Read the article

  • Is it possible to dedicate the physical screen of a vmware server machine to a guest vm graphically?

    - by matnagel
    I have a vmware server 2.x running on ubuntu server (8.04). So the graphics card and the screen of the physical box are unused (I log in remotely and the host os has only the cli console installed). I wonder if it is possible to assign this graphics card to a virtual machine directly and use it for the gui of this guest? Or maybe if I add a second graphics card to the machine?

    Read the article

  • How to share drive space from vmware server 2 host to a guest?

    - by matnagel
    In the vmware tools in the guest there is an option to access shares from the host. What is the way to create such shares on a vmware 2 host? I did not find where in infrastructure web access. I also went through the vmware server 2 user's guide but did not see it mentioned. Can you help? This is an ubuntu 64 bit server 8.04 LTS host.

    Read the article

  • Is this distributed database server idea feasible?

    - by David
    I often use SQLite for creating simple programs in companies. The database is placed on a file server. This works fine as long as there are not more than about 50 users working towards the database concurrently (though depending on whether it is reads or writes). Once there are more than this, they will notice a slowdown if there are a lot of concurrent writing on the server as lots of time is spent on locks, and there is nothing like a cache as there is no database server. The advantage of not needing a database server is that the time to set up something like a company Wiki or similar can be reduced from several months to just days. It often takes several months because some IT-department needs to order the server and it needs to conform with the company policies and security rules and it needs to be placed on the outsourced server hosting facility, which screws up and places it in the wrong localtion etc. etc. Therefore, I thought of an idea to create a distributed database server. The process would be as follows: A user on a company computer edits something on a Wiki page (which uses this database as its backend), to do this he reads a file on the local harddisk stating the ip-address of the last desktop computer to be a database server. He then tries to contact this computer directly via TCP/IP. If it does not answer, then he will read a file on the file server stating the ip-address of the last desktop computer to be a database server. If this server does not answer either, his own desktop computer will become the database server and register its ip-address in the same file. The SQL update statement can then be executed, and other desktop computers can connect to his directly. The point with this architecture is that, the higher load, the better it will function, as each desktop computer will always know the ip-address of the database server. Also, using this setup, I believe that a database placed on a fileserver could serve hundreds of desktop computers instead of the current 50 or so. I also do not believe that the load on the single desktop computer, which has become database server will ever be noticable, as there will be no hard disk operations on this desktop, only on the file server. Is this idea feasible? Does it already exist? What kind of database could support such an architecture?

    Read the article

  • Database Snapshots of Mirrored databases affect performance of Principal database?

    - by yrushka
    I have 2 servers set in Mirroring High-safety. One is Principal and another in Mirror. Currently I have 2 snapshots of a Production database (100 GB size) created on Principal server (for no_lock purpose of massive select processes) and 2 snapshots on the mirror server for the same database for reporting purposes. I know snapshots reduce performance of source databases but I am not sure if snapshots from mirror server have any impact on principal server's performance. thanks,

    Read the article

  • Login failed for user 'XXX' on the mirrored sql server

    - by hp17
    Hello, We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

    Read the article

  • Certificates in SQL Server 2008

    - by Brandi
    I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

    Read the article

  • SQL Server 'Real Time' Mirroring Possible?

    - by Ryan
    We have a SQL Server that has important databases for our clients, if the server goes down we want another server to be ready to be switched over (we would just change the IP). The question is, how can we automatically sync the primary SQL Server to the secondary one periodically through out the day? Or even in real time? Thanks!

    Read the article

  • advise on pointing reporting service data sources

    - by pearcewg
    It's possible I am unable to resolve this because I have been spoiled in other DEV environments where I had one database server for each reporting server. I need some advise on how to point a single SQL Server reporting server to multiple database servers. These databases correspond to DEV, TEST and QA environments. The way the reporting is currently configured I am unable to toggle between environments gracefully. Any advise would be greatly appreciated.

    Read the article

  • SQL Server 2008 services error on account

    - by TheDude
    I installed SQL Server Enterprise, but can't get it to work. It is a stand alone, on a laptop for development purposes. No network is involved, no other users. The OS is windows 7. Now, I keep receiving eventId 7000, which means that access is denied for the user (the user was Network Services). So, after reading up on it, I kind of got the idea that a user account should be created with minimal privileges. So, off I went and added a user, SQLservices. In the SQL Server Configuration Manager I right clicked SQL Server(MSSQLSERVER), and in the properties I added my new user. Well, here's mister eventId 7000 again. I don't get what I am doing wrong. Also, this new user ends up on my start-up screen. I don't think I want that... I mean, it would be weird to have x number of users crowding up my start-up screen just because I created those for my windows services... The error I get when I add the user in SQL Server Configuration Manager is as follows: Permission Denied. [0x80070005] Helps!

    Read the article

  • How to set Standby server

    - by lasko
    I have an application that connects to SQL Server 2008. What I want is to make a standby server (this standby server should be a mirror of the primary one). So that when the connection fails, the primary server should automatically switch to standby server without modifying my application. If there is way, please tell me in detail or even if there is third party product. Note that I need to set the connection in my application to one server only.

    Read the article

  • SQL Table stored as a Heap - the dangers within

    - by MikeD
    Nearly all of the time I create a table, I include a primary key, and often that PK is implemented as a clustered index. Those two don't always have to go together, but in my world they almost always do. On a recent project, I was working on a data warehouse and a set of SSIS packages to import data from an OLTP database into my data warehouse. The data I was importing from the business database into the warehouse was mostly new rows, sometimes updates to existing rows, and sometimes deletes. I decided to use the MERGE statement to implement the insert, update or delete in the data warehouse, I found it quite performant to have a stored procedure that extracted all the new, updated, and deleted rows from the source database and dump it into a working table in my data warehouse, then run a stored proc in the warehouse that was the MERGE statement that took the rows from the working table and updated the real fact table. Use Warehouse CREATE TABLE Integration.MergePolicy (PolicyId int, PolicyTypeKey int, Premium money, Deductible money, EffectiveDate date, Operation varchar(5)) CREATE TABLE fact.Policy (PolicyKey int identity primary key, PolicyId int, PolicyTypeKey int, Premium money, Deductible money, EffectiveDate date) CREATE PROC Integration.MergePolicy as begin begin tran Merge fact.Policy as tgtUsing Integration.MergePolicy as SrcOn (tgt.PolicyId = Src.PolicyId) When not matched by Target then Insert (PolicyId, PolicyTypeKey, Premium, Deductible, EffectiveDate)values (src.PolicyId, src.PolicyTypeKey, src.Premium, src.Deductible, src.EffectiveDate) When matched and src.Operation = 'U' then Update set PolicyTypeKey = src.PolicyTypeKey,Premium = src.Premium,Deductible = src.Deductible,EffectiveDate = src.EffectiveDate When matched and src.Operation = 'D' then Delete ;delete from Integration.WorkPolicy commit end Notice that my worktable (Integration.MergePolicy) doesn't have any primary key or clustered index. I didn't think this would be a problem, since it was relatively small table and was empty after each time I ran the stored proc. For one of the work tables, during the initial loads of the warehouse, it was getting about 1.5 million rows inserted, processed, then deleted. Also, because of a bug in the extraction process, the same 1.5 million rows (plus a few hundred more each time) was getting inserted, processed, and deleted. This was being sone on a fairly hefty server that was otherwise unused, and no one was paying any attention to the time it was taking. This week I received a backup of this database and loaded it on my laptop to troubleshoot the problem, and of course it took a good ten minutes or more to run the process. However, what seemed strange to me was that after I fixed the problem and happened to run the merge sproc when the work table was completely empty, it still took almost ten minutes to complete. I immediately looked back at the MERGE statement to see if I had some sort of outer join that meant it would be scanning the target table (which had about 2 million rows in it), then turned on the execution plan output to see what was happening under the hood. Running the stored procedure again took a long time, and the plan output didn't show me much - 55% on the MERGE statement, and 45% on the DELETE statement, and table scans on the work table in both places. I was surprised at the relative cost of the DELETE statement, because there were really 0 rows to delete, but I was expecting to see the table scans. (I was beginning now to suspect that my problem was because the work table was being stored as a heap.) Then I turned on STATS_IO and ran the sproc again. The output was quite interesting.Table 'Worktable'. Scan count 0, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.Table 'Policy'. Scan count 0, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.Table 'MergePolicy'. Scan count 1, logical reads 433276, physical reads 60, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. I've reproduced the above from memory, the details aren't exact, but the essential bit was the very high number of logical reads on the table stored as a heap. Even just doing a SELECT Count(*) from Integration.MergePolicy incurred that sort of output, even though the result was always 0. I suppose I should research more on the allocation and deallocation of pages to tables stored as a heap, but I haven't, and my original assumption that a table stored as a heap with no rows would only need to read one page to answer any query was definitely proven wrong. It's likely that some sort of physical defragmentation of the table may have cleaned that up, but it seemed that the easiest answer was to put a clustered index on the table. After doing so, the execution plan showed a cluster index scan, and the IO stats showed only a single page read. (I aborted my first attempt at adding a clustered index on the table because it was taking too long - instead I ran TRUNCATE TABLE Integration.MergePolicy first and added the clustered index, both of which took very little time). I suspect I may not have noticed this if I had used TRUNCATE TABLE Integration.MergePolicy instead of DELETE FROM Integration.MergePolicy, since I'm guessing that the truncate operation does some rather quick releasing of pages allocated to the heap table. In the future, I will likely be much more careful to have a clustered index on every table I use, even the working tables. Mike  

    Read the article

  • Best practices: Ajax and server side scripting with stored procedures

    - by Luka Milani
    I need to rebuild an old huge website and probably to port everyting to ASP.NET and jQuery and I would like to ask for some suggestion and tips. Actually the website uses: Ajax (client site with prototype.js) ASP (vb script server side) SQL Server 2005 IIS 7 as web server This website uses hundred of stored procedures and the requests are made by an ajax call and only 1 ASP page that contain an huge select case Shortly an example: JAVASCRIPT + PROTOTYPE: var data = { action: 'NEWS', callback: 'doNews', param1: $('text_example').value, ......: ..........}; AjaxGet(data); // perform a call using another function + prototype SERVER SIDE ASP: <% ...... select case request("Action") case "NEWS" With cmmDB .ActiveConnection = Conn .CommandText = "sp_NEWS_TO_CALL_for_example" .CommandType = adCmdStoredProc Set par0DB = .CreateParameter("Param1", adVarchar, adParamInput,6) Set par1DB = .CreateParameter(".....", adInteger, adParamInput) ' ........ ' can be more parameters .Parameters.Append par0DB .Parameters.Append par1DB par0DB.Value = request("Param1") par1DB.Value = request(".....") set rs=cmmDB.execute RecodsetToJSON rs, jsa ' create JSON response using a sub End With .... %> So as you can see I have an ASP page that has a lot of CASE and this page answers to all the ajax request in the site. My question are: Instead of having many CASES is it possible to create dynamic vb code that parses the ajax request and creates dynamically the call to the desired SP (also implementing the parameters passed by JS)? What is the best approach to handle situations like this, by using the advantages of .Net + protoype or jQuery? How the big sites handle situation like this? Do they do it by creating 1 page for request? Thanks in advance for suggestion, direction and tips.

    Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >