Search Results

Search found 23661 results on 947 pages for 'worse is better'.

Page 185/947 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook. Edit I noticed this question is getting a lot of views. To give a quick update, I never did resolve this issue with the given distro's. However, I'm currently running Ubuntu 10.10 netbook edition and this issue has gone away.

  Read the article

• Ruby installed on Ubuntu 10.10 slow on one machine but not other

  - by Aaron Jensen

  I have a machine that was provisioned several months ago. RVM was used to install ruby 1.9.3-p125 as well as 1.9.3-p125-perf. When I compared raw ruby performance to another identical machine the older machine smoked them. For example: ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 3.790000 0.000000 3.790000 ( 3.800895) each 2.410000 0.000000 2.410000 ( 2.420860) any 3.960000 0.000000 3.960000 ( 3.972099) include 1.440000 0.000000 1.440000 ( 1.442862) ------------------------------------ total: 11.600000sec vs ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 10.740000 0.000000 10.740000 ( 10.769366) each 6.080000 0.010000 6.090000 ( 6.106323) any 10.600000 0.000000 10.600000 ( 10.641606) include 4.160000 0.000000 4.160000 ( 4.171530) ------------------------------------ total: 31.590000sec I attempted to reinstall 1.9.3-p125 with rvm on the fast machine and that ruby is now slow. It's as if something changed in RVM, or I installed some package that made compiled versions of ruby perform significantly worse. I know this is a tough question to answer, but what things should I look into in order to track down why the performance has suffered so much? edit I just attempted to install with ruby-build and the version installed was fast. Something rvm is doing to build it in my environment is slow.

  Read the article

• UML diagrams that are actually pretty?

  - by Borek

  I'm looking for a diagramming software that would produce good looking output. It doesn't need to support everything (or even much) from UML, is doesn't need to have code engineering functions or anything, it just needs to produce visually interesting output. Here is a couple of samples of products that I consider ugly / not good enough: Visio with default UML stencils (didn't find better looking ones), Enterprise Architect, Dia, ArgoUML and many other "professional" UML tools. A couple of visually compelling tools that I considered (but found issues with): Visual Studio class diagrams - just for .NET classes but the output is miles better than what UML tools typically produce NClass - similar to VS's class diagrams but I could not find the "pretty", blue skin anywhere yuml.me - very nice but lacking some advanced layout options. I have to say that I find their style almost ideal for high-level diagrams - they look sketchy which is good. Balsamiq - I think Joel used this for hginit.com and I liked it. However, it's not suited for creating software diagrams so I can imagine it would be quite a lot of work MS Word has actually quite a good graphics engine but I'd rather leave this as a choice of the last resort I'd be grateful for any good tips.

  Read the article

• Combining XmlWriter objects?

  - by Kevin

  The way my application is structured, each component generates output as XML and returns an XmlWriter object. Before rendering the final output to the page, I combine all XML and perform an XSL transformation on that object. Below, is a simplified code sample of the application structure. Does it make sense to combine XmlWriter objects like this? Is there a better way to structure my application? The optimal solution would be one where I didn't have to pass a single XmlWriter instance as a parameter to each component. function page1Xml() { $content = new XmlWriter(); $content->openMemory(); $content->startElement('content'); $content->text('Sample content'); $content->endElement(); return $content; } function generateSiteMap() { $sitemap = new XmlWriter(); $sitemap->openMemory(); $sitemap->startElement('sitemap'); $sitemap->startElement('page'); $sitemap->writeAttribute('href', 'page1.php'); $sitemap->text('Page 1'); $sitemap->endElement(); $sitemap->endElement(); return $sitemap; } function output($content) { $doc = new XmlWriter(); $doc->openMemory(); $doc->writePi('xml-stylesheet', 'type="text/xsl" href="template.xsl"'); $doc->startElement('document'); $doc->writeRaw( generateSiteMap()->outputMemory() ); $doc->writeRaw( $content->outputMemory() ); $doc->endElement(); $doc->endDocument(); $output = xslTransform($doc); return $output; } $content = page1Xml(); echo output($content); Update: I may abandon XmlWriter altogether and use DomDocument instead. It is more flexible and it also seemed to perform better (at least on the crude tests I created).

  Read the article

• Enterprise integration of disparate systems

  - by Chris Latta

  We're about to embark on a fairly large integration effort to kill off a bunch of Access and Sql Server databases and get everything into one coherent enterprise system. There are also a number of other systems (accounting, CRM, payroll, MS Exchange) that hold critical data that we need to integrate (use for data validation in other systems), report on and otherwise expose. It is likely that some of these systems will change in the next few years, so we need to isolate our systems to be ready for change. Ideally we would be able to expose our forms in a consistent manner across as many of our our systems as possible without having to re-develop them for each system. We are currently targeting SharePoint (2007 and soon 2010), Office (2007 and soon 2010 - Word, Excel, PowerPoint and Outlook), Reporting Services, .Net console applications, .Net Windows applications, shell extensions, and with the possibility of exposing some functionality on mobile devices (BlackBerries currently, maybe iPhones later) and via our website. We're moving development to Visual Studio 2010 (from 2005) ahead of migrating to SharePoint 2010 and Office 2010. Given that most of our development is presently targeted to the .Net framework (mostly in C#) it seems logical to stick with this unless there is some compelling reason to switch frameworks/platform for some aspects. We're thinking of your standard Database-Data Integration layer-Business Objects Layer-Web Services (or REST) layer-Client Application plus doing our own client application with WPF (or something else?) forms that can also be exposed in the MS systems (SharePoint, Office, Windows). So, we don't want much, just everything :) Basically we need to isolate ourselves from database and systems changes, create an API that can be used throughout our systems and then make this functionality available in our client applications. I'm very keen to get pointers from anyone who has tips on how to pull this off. Should we look at the Enterprise Library as a place to start? Is REST with ASP.Net MVC2 a better solution than Web Services for a system like this? Will WPF deliver forms re-use or is there something better?

  Read the article

• Do new Apple SDKs patch previous releases?

  - by Francisco Garcia

  A new iPhone will be soon out there along a new iOS release. Sooner or later there will also be a Xcode upgrade with the SDK for iOS 6 Does Apple do any type of bugfix on previous SDKs or are bugfixes just solved on new releases? As an example: Core Data with iCloud still have some issues but it is getting better over time. Let's say I have an app that really depends on that combo. I would require iOS6, however not all users upgrade the handsets. Ideally an app compiled with a newer XCode release could patch some error on previous SDKs if the target is set to an older iOS release. Should I expect that a project compiled with future SDK releases to work better on devices running on older iOS versions? will be some SDKs bugfixes backported? I understand that there are some bugs that cannot be fixed without an iOS update on the client. Also that it is a lot of work (and unlikely) to backport bugfixes. I am just wondering what is the normal release policy of Apple.

  Read the article

• Are ZFS snapshots + S3 a viable backup system for several VMs and general fileserver storage?

  - by AllanA

  I've been tasked with setting up a backup system for my small office (around 12 people). Most of our production stuff is on the AWS cloud, so what I need to back up are some small office/development files (under 100G right now), plus our operational VMs and development, which round out to a bit under 1T. I just need something reliable, convenient, and straightforward. I'm comfortable with Linux, FreeBSD, and to some extent Solaris 10, so I'm leaning toward a full server rather than an appliance system ala Openfiler or FreeNAS. What I'm contemplating is a small fileserver for general storage and nightly backups of the virtual machines, followed up by an offsite backup to Amazon's S3 storage service. It'd be the usual incremental backups nightly and full backup weekly. My question is if using ZFS snapshots, both locally and dumped to S3 via 'zfs send [-i]', is a viable backup tool? Or should I stick to using Duplicity, or some other method entirely? ZFS snapshots on the internal fileserver/backup machine sound like a perfect way to provide quick and convenient data recovery, so I'm likely to go with that for local redundancy. (If you folks see scenarios where relying on ZFS snapshots would be worse than a more traditional archiving backup, feel free to convince me.) But are snapshots flexible enough to lean on for recovery from the loss of my backup server? Or am I better off with something more traditional? (feel free to recommend free or commercial backup solutions you favor.)

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Nada

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• How does one gets started with Winforms style applications on Win32?

  - by Billy ONeal

  EDIT: I'm extremely tired and frustrated at the moment -- please ignore that bit in this question -- I'll edit it in the morning to be better. Okay -- a bit of background: I'm a C++ programmer mostly, but the only GUI stuff I've ever done was on top of .NET's WinForms platform. I'm completely new to Windows GUI programming, and despite Petzold's excellent book, I'm extremely confused. Namely, it seems that most every reference on getting started with Win32 is all about drawing lines and curves and things -- a topic about which (at least at present time) I couldn't care less. I need a checked list box, a splitter, and a textbox -- something that would take less than 10 minutes to do in Winforms land. It has been recommended to me to use the WTL library, which provides an implementation of all three of these controls -- but I keep getting hung up on simple things, such as getting the damn controls to use the right font, and getting High DPI working correctly. I've spent two freaking days on this, and I can't help but think there has to be a better reference for these kinds of things than I've been able to find. Petzold's book is good, but it hasn't been updated since Windows 95 days, and there's been a LOT changed w.r.t. how applications should be correctly developed since it was published. I guess what I'm looking for is a modern Petzold book. Where can I find such a resource, if any?

  Read the article

• tiemout for a function that waits indefiinitely (like listen())

  - by Fantastic Fourier

  Hello, I'm not quite sure if it's possible to do what I'm about to ask so I thought I'd ask. I have a multi-threaded program where threads share a memory block to communicate necessary information. One of the information is termination of threads where threads constantly check for this value and when the value is changed, they know it's time for pthread_exit(). One of the threads contains listen() function and it seems to wait indefinitely. This can be problematic if there are nobody who wants to make connection and the thread needs to exit but it can't check the value whether thread needs to terminate or not since it's stuck on listen() and can't move beyond. while(1) { listen(); ... if(value == 1) pthread_exit(NULL); } My logic is something like that if it helps illustrate my point better. What I thought would solve the problem is to allow listen() to wait for a duration of time and if nothing happens, it moves on to next statement. Unfortunately, none of two args of listen() involves time limit. I'm not even sure if I'm going about the right way with multi-threaded programming, I'm not much experienced at all. So is this a good approach? Perhaps there is a better way to go about it? Thanks for any insightful comments.

  Read the article

• How does one debug Windows network share authentication?

  - by ajs410

  I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

  Read the article

• Android - Where to store generated bitmaps?

  - by Josh

  I've got an app which dynamically generates anywhere from 6 to 100 small bitmaps for the user to move around the screen in a given session. I currently generate them in onCreate and store them to the sd card, so that after an orientation change I can grab them out of external storage and display them again. However, this takes time (the loading) and I'd like to keep the bitmap references around between lifecyle changes for quicker access. My question is, is there a better place to store my generated bitmaps? I was thinking about creating a static storage library in my base activity, something that would only need to be reloaded when the app is completely removed from memory (shutdown, other apps need resources, 30 minute restart, etc). Ideally, I'd like the user to be able to back out to the title screen, click a "Resume" button, and in onCreate I just have access to those resident bitmap references instead of having to load them from storage again. For this reason I don't think Activity.onRetainNonConfigurationInstance is what I need. Alternatively, is there a better way to handle multiple generated bitmaps than what I'm doing or the plan I described?

  Read the article

• Online job-searching is tedious. Help me automate it.

  - by ehsanul

  Many job sites have broken searches that don't let you narrow down jobs by experience level. Even when they do, it's usually wrong. This requires you to wade through hundreds of postings that you can't apply for before finding a relevant one, quite tedious. Since I'd rather focus on writing cover letters etc., I want to write a program to look through a large number of postings, and save the URLs of just those jobs that don't require years of experience. I don't require help writing the scraper to get the html bodies of possibly relevant job posts. The issue is accurately detecting the level of experience required for the job. This should not be too difficult as job posts are usually very explicit about this ("must have 5 years experience in..."), but there may be some issues with overly simple solutions. In my case, I'm looking for entry-level positions. Often they don't say "entry-level", but inclusion of the words probably means the job should be saved. Next, I can safely exclude a job the says it requires "5 years" of experience in whatever, so a regex like /\d\syears/ seems reasonable to exclude jobs. But then, I realized some jobs say they'll take 0-2 years of experience, matches the exclusion regex but is clearly a job I want to take a look at. Hmmm, I can handle that with another regex. But some say "less than 2 years" or "fewer than 2 years". Can handle that too, but it makes me wonder what other patterns I'm not thinking of, and possibly excluding many jobs. That's what brings me here, to find a better way to do this than regexes, if there is one. I'd like to minimize the false negative rate and save all the jobs that seem like they might not require many years of experience. Does excluding anything that matches /[3-9]\syears|1\d\syears/ seem reasonable? Or is there a better way? Training a bayesian filter maybe?

  Read the article

• Groovy htmlunit getFirstByXPath returning null

  - by StartingGroovy

  I have had a few issues with HtmlUnit returning nulls lately and am looking for guidance. each of my results for grabbing the first row of a website have returned null. I am wondering if someone can A) explain why they might be returning null B) explain better ways (if there are some) to go about getting the information Here is my current code (URL is in the source): client = new WebClient(BrowserVersion.FIREFOX_3) client.javaScriptEnabled = false def url = "http://www.hidemyass.com/proxy-list/" page = client.getPage(url) IpAddress = page.getFirstByXPath("//html/body/div/div/form/table/tbody/tr/td[2]").getValue() println "IP Address is: $data" //returns null //Port_Number is an Image Country = page.getFirstByXPath("//html/body/div/div/form/table/tbody/tr/td[4][@class='country']/@rel").getValue() println "Country abbreviation is: $Country" //differentiate speed and connection by name of gif? Type = page.getFirstByXPath("//html/body/div/div/form/table/tbody/tr/td[7]").getValue() println "Proxy type is: $Type" Anonymity = page.getFirstByXPath("//html/body/div/div/form/table/tbody/tr/td[8]").getValue() println "Anonymity Level is: $Anonymity" client.closeAllWindows() Right now all of my XPaths return null and .getValue() obviously doesn't work on null. I also have questions as to what I should do about the PORT since it is an image? Is there a better alternative than downloading it and attempting to solve it by OCR? Side Note There is no significance in this site, I was just looking for a site that I could practice scraping on (the last one I ran into issues of fragment identities and couldn't get an answer to: HtmlUnit getByXpath returns null and HtmlUnit and Fragment Identities )

  Read the article

• Why does Ruby have Rails while Python has no central framework?

  - by yar

  This is a(n) historical question, not a comparison-between-languages question: This article from 2005 talks about the lack of a single, central framework for Python. For Ruby, this framework is clearly Rails. Why, historically speaking, did this happen for Ruby but not for Python? (or did it happen, and that framework is Django?) Also, the hypothetical questions: would Python be more popular if it had one, good framework? Would Ruby be less popular if it had no central framework? [Please avoid discussions of whether Ruby or Python is better, which is just too open-ended to answer.] Edit: Though I thought this is obvious, I'm not saying that other frameworks do not exist for Ruby, but rather that the big one in terms of popularity is Rails. Also, I should mention that I'm not saying that frameworks for Python are not as good (or better than) Rails. Every framework has its pros and cons, but Rails seems to, as Ben Blank says in the one of the comments below, have surpassed Ruby in terms of popularity. There are no examples of that on the Python side. WHY? That's the question.

  Read the article

• In what order should the Python concepts be explained to absolute beginners?

  - by Tomaž Pisanski

  I am teaching Python to undergraduate math majors. I am interested in the optimal order in which students should be introduced to various Python concepts. In my view, at each stage the students should be able to solve a non-trivial programming problem using only the tools available at that time. Each new tool should enable a simpler solution to a familiar problem. A selection of numerous concepts available in Python is essential in order to keep students focused. They should also motivated and should appreciate each newly mastered tool without too much memorization. Here are some specific questions: For instance, my predecessor introduced lists before strings. I think the opposite is a better solution. Should function definitions be introduced at the very beginning or after mastering basic structured programming ideas, such as decisions (if) and loops (while)? Should sets be introduced before dictionaries? Is it better to introduce reading and writing files early in the course or should one use input and print for most of the course? Any suggestions with explanations are most welcome.

  Read the article

• What to call factory-like (java) methods used with immutable objects

  - by StaxMan

  When creating classes for "immutable objects" immutable meaning that state of instances can not be changed; all fields assigned in constructor) in Java (and similar languages), it is sometimes useful to still allow creation of modified instances. That is, using an instance as base, and creating a new instance that differs by just one property value; other values coming from the base instance. To give a simple example, one could have class like: public class Circle { final double x, y; // location final double radius; public Circle(double x, double y, double r) { this.x = x; this.y = y; this.r = r; } // method for creating a new instance, moved in x-axis by specified amount public Circle withOffset(double deltaX) { return new Circle(x+deltaX, y, radius); } } So: what should method "withOffset" be called? (note: NOT what its name ought to be -- but what is this class of methods called). Technically it is kind of a factory method, but somehow that does not seem quite right to me, since often factories are just given basic properties (and are either static methods, or are not members of the result type but factory type). So I am guessing there should be a better term for such methods. Since these methods can be used to implement "fluent interface", maybe they could be "fluent factory methods"? Better suggestions? EDIT: as suggested by one of answers, java.math.BigDecimal is a good example with its 'add', 'subtract' (etc) methods. Also: I noticed that there's this question (by Jon Skeet no less) that is sort of related (although it asks about specific name for method)

  Read the article

• Is this 2D array initialization a bad idea?

  - by Brendan Long

  I have something I need a 2D array for, but for better cache performance, I'd rather have it actually be a normal array. Here's the idea I had but I don't know if it's a terrible idea: const int XWIDTH = 10, YWIDTH = 10; int main(){ int * tempInts = new int[XWIDTH * YWIDTH]; int ** ints = new int*[XWIDTH]; for(int i=0; i<XWIDTH; i++){ ints[i] = &tempInts[i*YWIDTH]; } // do things with ints delete[] ints[0]; delete[] ints; return 0; } So the idea is that instead of newing a bunch of arrays (and having them placed in different places in memory), I just point to an array I made all at once. The reason for the delete[] (int*) ints; is because I'm actually doing this in a class and it would save [trivial amounts of] memory to not save the original pointer. Just wondering if there's any reasons this is a horrible idea. Or if there's an easier/better way. The goal is to be able to access the array as ints[x][y] rather than ints[x*YWIDTH+y].

  Read the article

• Give the mount point of a path

  - by Charles Stewart

  The following, very non-robust shell code will give the mount point of $path: (for i in $(df|cut -c 63-99); do case $path in $i*) echo $i;; esac; done) | tail -n 1 Is there a better way to do this? Postscript This script is really awful, but has the redeeming quality that it Works On My Systems. Note that several mount points may be prefixes of $path. Examples On a Linux system: cas@txtproof:~$ path=/sys/block/hda1 cas@txtproof:~$ for i in $(df -a|cut -c 57-99); do case $path in $i*) echo $i;; esac; done| tail -1 /sys On a Mac osx system cas local$ path=/dev/fd/0 cas local$ for i in $(df -a|cut -c 63-99); do case $path in $i*) echo $i;; esac; done| tail -1 /dev Note the need to vary cut's parameters, because of the way df's output differs: indeed, awk is better. Answer It looks like munging tabular output is the only way within the shell, but df /dev/fd/impossible | tail -1 | awk '{ print $NF}' is a big improvement on what I had. Note two differences in semantics: firstly, df $path insists that $path names an existing file, the script I had above doesn't care; secondly, there are no worries about dereferncing symlinks. It's not difficult to write Python code to do the job.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• in Rails, with check_box_tag, how do I keep the checkboxes checked after submitting query?

  - by Sebastien Paquet

  Ok, I know this is for the Saas course and people have been asking questions related to that as well but i've spent a lot of time trying and reading and I'm stuck. First of all, When you have a model called Movie, is it better to use Ratings as a model and associate them or just keep Ratings in an array floating in space(!). Second, here's what I have now in my controller: def index @movies = Movie.where(params[:ratings].present? ? {:rating => (params[:ratings].keys)} : {}).order(params[:sort]) @sort = params[:sort] @ratings = Ratings.all end Now, I decided to create a Ratings model since I thought It would be better. Here's my view: = form_tag movies_path, :method => :get do Include: - @ratings.each do |rating| = rating.rating = check_box_tag "ratings[#{rating.rating}]" = submit_tag "Refresh" I tried everything that is related to using a conditional ternary inside the checkbox tag ending with " .include?(rating) ? true : "" I tried everything that's supposed to work but it doesn't. I don't want the exact answer, I just need guidance.Thanks in advance!

  Read the article

• Strategies for Synchronizing Data Between a Rails App and iPhone App

  - by jessecurry

  I've written many iPhone Applications that have pulled data from web services and I've worked on synchronizing data between an iPhone App and a Web Application, but I've always felt that there is probably a better way to handle the synchronization. I'd like to know what strategies you have used to synchronize data between your iPhone(read: mobile) Apps and your Rails(read: web) Applications. Are there any strategies that scale particularly well? How have you dealt with large amounts of data? (Do you use paged responses?) How do you make sure that data is not overwritten? Is there a reason to avoid Ruby on Rails? if so, can you suggest an alternative? What is better about the alternative? What strategies have failed? Why do you believe that those strategies failed? I would like to be able to keep all of the data modifications on the server, but the particular application I am about to start work on will need the ability to operate while disconnected from the network. The user will be able to update data on the mobile device and update data through the web application. When the user's mobile device connects to the server any local changes will be pushed to the server.

  Read the article

• Multiple leaf methods problem in composite pattern

  - by Ondrej Slinták

  At work, we are developing an PHP application that would be later re-programmed into Java. With some basic knowledge of Java, we are trying to design everything to be easily re-written, without any headaches. Interesting problem came out when we tried to implement composite pattern with huge number of methods in leafs. What are we trying to achieve (not using interfaces, it's just an example): class Composite { ... } class LeafOne { public function Foo( ); public function Moo( ); } class LeafTwo { public function Bar( ); public function Baz( ); } $c = new Composite( Array( new LeafOne( ), new LeafTwo( ) ) ); // will call method Foo in all classes in composite that contain this method $c->Foo( ); It seems like pretty much classic Composite pattern, but problem is that we will have quite many leaf classes and each of them might have ~5 methods (of which few might be different than others). One of our solutions, which seems to be the best one so far and might actually work, is using __call magic method to call methods in leafs. Unfortunately, we don't know if there is an equivalent of it in Java. So the actual question is: Is there a better solution for this, using code that would be eventually easily re-coded into Java? Or do you recommend any other solution? Perhaps there's some different, better pattern I could use here. In case there's something unclear, just ask and I'll edit this post.

  Read the article

• How would you organize this in asp.net mvc?

  - by chobo

  I have an asp.net mvc 2.0 application that contains Areas/Modules like calendar, admin, etc... There may be cases where more than one area needs to access the same Repo, so I am not sure where to put the Data Access Layers and Repositories. First Option: Should I create Data Access Layer files (Linq to SQL in my case) with their accompanying Repositories for each area, so each area only contains the Tables, and Repositories needed by those areas. The benefit is that everything needed to run that module is one place, so it is more encapsulated (in my mind anyway). The downside is that I may have duplicate queries, because other modules may use the same query. Second Option Or, would it be better to place the DAL and Repositories outside the Area's and treat them as Global? The advantage is I won't have any duplicate queries, but I may be loading a lot of unnecessary queries and DAL tables up for certain modules. It is also more work to reuse or modify these modules for future projects (though the chance of reusing them is slim to none :)) Which option makes more sense? If someone has a better way I'd love to hear it. Thanks!

  Read the article

• How to combine these two PHP arrays ?

  - by Annan

  I have two arrays in php that are part of an image management system. weighted_images A multidimensional array. Each sub array is an associative array with keys of 'weight' (for ordering by) and 'id' (the id of the image). array( 156 => array('weight'=>1, 'id'=>156), 784 => array('weight'=>-2, 'id'=>784), ) images This array is user input. It's an array of image ids. array(784, 346, 748) I want to combine them in to a single array of ids ordered by the weight of the image. If an image doesn't have a weight append to the end. It's not a particularly hard problem however my solution is far from elegant and can't help thinking that there must be a better way to do this. $t_images = array(); foreach ($weighted_images as $wi) { if ( in_array($wi['id'], $images) ) { $t_images[$wi['weight']] = $wi['id']; } } foreach ($images as $image) { if ( !$weighted_images[$image] ) { $t_images[] = $image; } } $images = $t_images; Question: Is there a better way to do this?

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >