Search Results

Search found 5747 results on 230 pages for 'presentation layer'.

Page 193/230 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• mysql-python stopped working

  - by MAC

  This is a rather dumb question but i'am looking at a bizarre situation. I am running fedora and have python 2.6.5 installed. The other day i installed MySQL-python using yum (because i do not have the setuptools module so i cannot build it from source). Anyway yesterday i wrote my entire data access layer in python and it was running fine, i did test it. Today however it gives me an ImportError: No module named MySQLdb The only thing i ever changed was i installed eclipse and pyDev. Any ideas on what went wrong and how i fix it. I tried removing and re-installing MySql-python but that did not help. I did the following import sys print sys.path And it shows me all the paths which are basically pertaining to /usr/local/lib/python2.6 However i was trying to find where the MySQLdb module is installed and it seems that its installed in /usr/lib/python2.5/sitepackages Now i have no idea why it got installed there and why it was working earlier and why it stopped working now. Any ideas on how i should fix it. I did try copying the site-packages folder over to the python2.6 folder but that did not work Help!!

  Read the article

• Neural Network settings for fast training

  - by danpalmer

  I am creating a tool for predicting the time and cost of software projects based on past data. The tool uses a neural network to do this and so far, the results are promising, but I think I can do a lot more optimisation just by changing the properties of the network. There don't seem to be any rules or even many best-practices when it comes to these settings so if anyone with experience could help me I would greatly appreciate it. The input data is made up of a series of integers that could go up as high as the user wants to go, but most will be under 100,000 I would have thought. Some will be as low as 1. They are details like number of people on a project and the cost of a project, as well as details about database entities and use cases. There are 10 inputs in total and 2 outputs (the time and cost). I am using Resilient Propagation to train the network. Currently it has: 10 input nodes, 1 hidden layer with 5 nodes and 2 output nodes. I am training to get under a 5% error rate. The algorithm must run on a webserver so I have put in a measure to stop training when it looks like it isn't going anywhere. This is set to 10,000 training iterations. Currently, when I try to train it with some data that is a bit varied, but well within the limits of what we expect users to put into it, it takes a long time to train, hitting the 10,000 iteration limit over and over again. This is the first time I have used a neural network and I don't really know what to expect. If you could give me some hints on what sort of settings I should be using for the network and for the iteration limit I would greatly appreciate it. Thank you!

  Read the article

• VB.NET - Object reference not set to an instance of an object

  - by Daniel

  I need some help with my program. I get this error when I run my VB.NET program with a custom DayView control. ***** Exception Text ******* System.NullReferenceException: Object reference not set to an instance of an object. at SeaCow.Main.DayView1_ResolveAppointments(Object sender, ResolveAppointmentsEventArgs args) in C:\Users\Daniel\My Programs\Visual Basic\SeaCow\SeaCow\SeaCow\Main.vb:line 120 at Calendar.DayView.OnResolveAppointments(ResolveAppointmentsEventArgs args) at Calendar.DayView.OnPaint(PaintEventArgs e) at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer) at System.Windows.Forms.Control.WmPaint(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) According to the error code, the 'for each' loop below is causing the NullReferenceException error. At default, the 'appointments' list is assigned to nothing and I can't find where the ResolveAppointments function is being called at. Private Sub DayView1_ResolveAppointments(ByVal sender As Object, ByVal args As Calendar.ResolveAppointmentsEventArgs) Handles DayView1.ResolveAppointments Dim m_Apps As New List(Of Calendar.Appointment) For Each m_App As Calendar.Appointment In appointments If (m_App.StartDate >= args.StartDate) AndAlso (m_App.StartDate <= args.EndDate) Then m_Apps.Add(m_App) End If Next args.Appointments = m_Apps End Sub Anyone have any suggestions?

  Read the article

• How to invalidate the OutputCache in a webfarm?

  - by Pure.Krome

  Hi folks, i've got a website that uses OutputCache attribute to cache pages. Works great. Now, I'm in the middle of R&D'ing scaling up this site to be in a web farm. Along with the usual suspects for webfarm pain ... I've noticed (pretty quickly/obviously) that the OutputCache from Server_A doesn't invalidate the OutputCache from Server_B .. if a try and invalidate a single server's OutputCache. This makes total sense - how can S_A 'tell' S_B to invalidate when they are physically 2 seperate machines, etc? So - what are our options? Velocity? I understand this will move the caching to a different layer .. which means that the final result (output) will always be required to be determined .. as opposed to the OutputCache whic remembers the final output content (yes, varby gives different versions, etc.. which is totally fine). So even though the poco or business objects are all sync'd, there's still that last rendering effort required (even if it's tiny .. compared to the effort to generate/sync business objects). So yeah .. not sure of the options here and what other people do?

  Read the article

• How to estimate size of data to transfer when using DbCommand.ExecuteXXX?

  - by Yadyn

  I want to show the user detailed progress information when performing potentially lengthy database operations. Specifically, when inserting/updating data that may be on the order of hundreds of KB or MB. Currently, I'm using in-memory DataTables and DataRows which are then synced with the database via TableAdapter.Update calls. This works fine and dandy, but the single call leaves little opportunity to glean any kind of progress info to show to the user. I have no idea how much data is passing through the network to the remote DB or its progress. Basically, all I know is when Update returns and it is assumed complete (barring any errors or exceptions). But this means all I can show is 0% and then a pause and then 100%. I can count the number of rows, even going so far to cound how many are actually Modified or Added, and I could even maybe calculate per DataRow its estimated size based on the datatype of each column, using sizeof for value types like int and checking length for things like strings or byte arrays. With that, I could probably determine, before updating, an estimated total transfer size, but I'm still stuck without any progress info once Update is called on the TableAdapter. Am I stuck just using an indeterminate progress bar or mouse waiting cursor? Would I need to radically change our data access layer to be able to hook into this kind of information? Even if I can't get it down to the precise KB transferred (like a web browser file download progress bar), could I at least know when each DataRow/DataTable finishes or something? How do you best show this kind of progress info using ADO.NET?

  Read the article

• video calling (center)

  - by rrejc

  We are starting to develop a new application and I'm searching for information/tips/guides on application architecture. Application should: read the data from an external (USB) device send the data to the remote server (through internet) receive the data from the remote server perform a video call with to the calling (support) center receive a video call call from the calling (support) center support touch screens In addition: some of the data should also be visible through the web page. So I was thinking about: On the server side: use the database (probably MS SQL) use ORM (nHibernate) to map the data from the DB to the domain objects create a layer with business logic in C# create a web (WCF) services (for client application) create an asp.net mvc application (for item 7.) to enable data view through the browser On the client side I would use WPF 4 application which will communicate with external device and the wcf services on the server. So far so good. Now the problem begins. I have no idea how to create a video call (outgoing or incoming) part of the application. I believe that there is no problem to communicate with microphone, speaker, camera with WPF/C#. But how to communicate with the call center? What protocol and encoding should be used? I think that I will need to create some kind of server which will: have a list of operators in the calling center and track which operator is occupied and which operator is free have a list of connected end users receive incoming calls from end users and delegate call to free operator delegate calls from calling center to the end user Any info, link, anything on where to start would be much appreciated. Many thanks!

  Read the article

• Trouble with LINQ databind to GridView and RowDataBound

  - by Michael

  Greetings all, I am working on redesigning my personal Web site using VS 2008 and have chosen to use LINQ to create by data-access layer. Part of my site will be a little app to help manage my budget better. My first LINQ query does successfully execute and display in a GridView, but when I try to use a RowDataBound event to work with the results and refine them a bit, I get the error: The type or namespace name 'var' could not be found (are you missing a using directive or an assembly reference?) This interesting part is, if I just try to put in a var s = "s"; anywhere else in the same file, I get the same error too. If I go to other files in the web project, var s = "s"; compiles fine. Here is the LINQ Query call: public static IQueryable pubGetRecentTransactions(int param_accountid) { clsDataContext db; db = new clsDataContext(); var query = from d in db.tblMoneyTransactions join p in db.tblMoneyTransactions on d.iParentTransID equals p.iTransID into dp from p in dp.DefaultIfEmpty() where d.iAccountID == param_accountid orderby d.dtTransDate descending, d.iTransID ascending select new { d.iTransID, d.dtTransDate, sTransDesc = p != null ? p.sTransDesc : d.sTransDesc, d.sTransMemo, d.mTransAmt, d.iCheckNum, d.iParentTransID, d.iReconciled, d.bIsTransfer }; return query; } protected void Page_Load(object sender, EventArgs e) { if (!this.IsPostBack) { this.prvLoadData(); } } internal void prvLoadData() { prvCtlGridTransactions.DataSource = clsMoneyTransactions.pubGetRecentTransactions(2); prvCtlGridTransactions.DataBind(); } protected void prvCtlGridTransactions_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { var datarow = e.Row.DataItem; var s = "s"; e.Row.Cells[0].Text = datarow.dtTransDate.ToShortDateString(); e.Row.Cells[1].Text = datarow.sTransDesc; e.Row.Cells[2].Text = datarow.mTransAmt.ToString("c"); e.Row.Cells[3].Text = datarow.iReconciled.ToString(); }//end if }//end RowDataBound My googling to date hasn't found a good answer, so I turn it over to this trusted community. I appreciate your time in assisting me.

  Read the article

• Cannot hide a UIButton - Please help!

  - by Neurofluxation

  Hey again, I have the following code: visitSite.hidden = YES; For some reason, when I click a UIButton and call this piece of code, the visitSite button does not hide. The code is within this block: -(IBAction)welcomeButtonPressed:(id)sender { [UIButton beginAnimations:@"welcomeAnimation" context:NULL]; [UIButton setAnimationDuration:1.5]; [UIButton SetAnimationDidStopSelector:@selector(nowHideThisSiteButton:finished:context:)]; [UIButton setAnimationTransition:UIViewAnimationTransitionCurlUp forView:self.view cache:YES]; ((UIView *)sender).hidden = YES; [UIButton commitAnimations]; } and the stop selector below: -(void)nowHideThisSiteButton:(NSString *)animationID finished:(BOOL *)finished context:(void *)context { visitSite.hidden = YES; } I've also tried [visitSite setHidden:YES]; and that fails as well. ALSO I've noticed that the setAnimationDidStopSelector does not get called at all. Also, visitSite (when NSLogged) equals: <UIButton: 0x1290f0; frame = (0 0; 320 460); opaque = NO; autoresize = RM+BM; layer = <CALayer: 0x1290f0>> visitSite.hidden (when NSLogged) equals: NULL Any more ideas? :(

  Read the article

• Sweave/R - Automatically generating an appendix that contains all the model summaries/plots/data pro

  - by John Horton

  I like the idea of making research available at multiple levels of detail i.e., abstract for the casually curious, full text for the more interested, and finally the data and code for those working in the same area/trying to reproduce your results. In between the actual text and the data/code level, I'd like to insert another layer. Namely, I'd like to create a kind of automatically generated appendix that contains the full regression output, diagnostic plots, exploratory graphs data profiles etc. from the analysis, regardless of whether those plots/regressions etc. made it into the final paper. One idea I had was to write a script that would examine the .Rnw file and automatically: Profile all data sets that are loaded (sort of like the Hmisc(?) package) Summarize all regressions - i.e., run summary(model) for all models Present all plots (regardless of whether they made it in the final version) The idea is to make this kind of a low-effort, push-button sort of thing as opposed to a formal appendix written like the rest of a paper. What I'm looking for is some ideas on how to do this in R in a relatively simple way. My hunch is that there is some way of going through the namespace, figuring out what something is and then dumping into a PDF. Thoughts? Does something like this already exist?

  Read the article

• Mimic remote API or extend existing django model

  - by drozzy

  I am in a process of designing a client for a REST-ful web-service. What is the best way to go about representing the remote resource locally in my django application? For example if the API exposes resources such as: List of Cars Car Detail Car Search Dealership summary So far I have thought of two different approaches to take: Try to wrangle the django's models.Model to mimic the native feel of it. So I could try to get some class called Car to have methods like Car.objects.all() and such. This kind of breaks down on Car Search resources. Implement a Data Access Layer class, with custom methods like: Car.get_all() Car.get(id) CarSearch.search("blah") So I will be creating some custom looking classes. Has anyone encoutered a similar problem? Perhaps working with some external API's (i.e. twitter?) Any advice is welcome. PS: Please let me know if some part of question is confusing, as I had trouble putting it in precise terms.

  Read the article

• Problem with z-index

  - by ripper234

  I'm trying to use z-index to layer a button and a div. The button appears behind the div, while according to z-index it should be in front of it. Here is the style elements associated with the button & div as captured by Firebug: Button button { position:relative; z-index:2; } Site.css (line 356) Inherited fromdiv#note19.sticky .sticky { text-align:center; } Site.css (line 360) Inherited fromtd.taskcell .taskcell { text-align:center; } Site.css (line 345) Inherited fromtable.tasksgrid table { border-collapse:collapse; } Site.css (line 221) Inherited frombody element.style { cursor:auto; } body { color:#696969; font-family:Verdana,Helvetica,Sans-Serif; font-size:0.75em; } Div .sticky .edit { height:100px; position:relative; vertical-align:middle; width:150px; z-index:1; } Site.css (line 371) Inherited fromdiv#note18.sticky .sticky { text-align:center; } Site.css (line 360) Inherited fromtd.taskcell .taskcell { text-align:center; } Site.css (line 345) Inherited fromtable.tasksgrid table { border-collapse:collapse; } Site.css (line 221) Inherited frombody element.style { cursor:auto; } body { color:#696969; font-family:Verdana,Helvetica,Sans-Serif; font-size:0.75em; } Note that the button has a z-index of 2, the div has a z-index of 1, and both are position:relative. Edit - full HTML is in this pastebin.

  Read the article

• LINQ Query please help C#.Net.

  - by Paul Matthews

  I'm very new to LINQ and struggling to find the answers. I have a simple SQL query. Select ID, COUNT(ID) as Selections, OptionName, SUM(Units) as Units FROM tbl_Results GROUP BY ID, OptionName. The results I got were: '1' '4' 'Approved' '40' '2' '1' 'Rejected' '19' '3' '2' 'Not Decided' '12' Due to having to encrypt all my data in the database I'm unable to do sums. Therefore I have now brought back the data and decrypt it in the application layer. Results would be: '1' 'Approved' '10' '3' 'Not Deceided' '6' '2' 'Rejected' '19' '1' 'Approved' '15' '1' 'Approved' '5' '3' 'Not Deceided' '6' '1' 'Approved' '10' using a simple class I have called back the above results, and put them in a list class. public class results { public int ID {get;set;} public string OptionName {get;set;} public int Unit {get;set;} } I almost have the LINQ query to bring back the results like the SQL query at the top var q = from r in Results group p.Unit by p.ID int g select new {ID = g.Key, Selections = g.Count(), Units = g.Sum()}; How do I ensure my LINQ query also give me the Option Name? Also if I created a class called Statistics to hold my results how would I modify the LINQ query to give me list result set? public class results { public int ID {get;set;} public int NumberOfSelections { get; set; } public string OptionName {get;set;} public int UnitTotal {get;set;} }

  Read the article

• Flash CS5- Problem with "navigateToURL" in web-browswer hosted on MySpace

  - by NervXT

  I made a quick flash document for my friend who posted it his MySpace. The document has 3 buttons, each with a URL attached to them. When I play the SWF file locally, the links work fine, however once it's published to MySpace, the links refuse to work. The hand icon comes up so it understands them at least as buttons, but it seems to do nothing when clicked in the web-browser. Also, I can open the SWF in my browser and it also works fine. I'm using Flash CS5 and working in ActionScript 3.0. The three buttons are on one layer called "Buttons". I right click the button and click "Actions". From there, I click the "Code Snippets" and under the folder "Actions" there is an item called "Click to Go To Webpage". Here is the code it gives you by default: button_2.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage_6); function fl_ClickToGoToWebPage_6(event:MouseEvent):void { navigateToURL(new URLRequest("http://www.adobe.com"), "_blank"); } I heard there was a problem with MySpace not allowing action scripts, but after checking the source code of the web-page, the values in the "param" code seem to "always" allow action scripts. At any point, I'm lost and not sure what it causing this. I don't think it's a browser issue, since it's working fine when I execute the SWF by itself, and when I load it into Firefox. It's just seems MySpace is having a problem with it. Any advice is appreciated.

  Read the article

• Validation with State Pattern for Multi-Page Forms in ASP.NET

  - by philrabin

  I'm trying to implement the state pattern for a multi-page registration form. The data on each page will be accumulated and stored in a session object. Should validation (including service layer calls to the DB) occur on the page level or inside each state class? In other words, should the concrete implementation of IState be concerned with the validation or should it be given a fully populated and valid object? See "EmptyFormState" class below: namespace Example { public class Registrar { private readonly IState formEmptyState; private readonly IState baseInformationComplete; public RegistrarSessionData RegistrarSessionData { get; set;} public Registrar() { RegistrarSessionData = new RegistrarSessionData(); formEmptyState = new EmptyFormState(this); baseInformationComplete = new BasicInfoCompleteState(this); State = formEmptyState; } public IState State { get; set; } public void SubmitData(RegistrarSessionData data) { State.SubmitData(data); } public void ProceedToNextStep() { State.ProceedToNextStep(); } } //actual data stored in the session //to be populated by page public class RegistrarSessionData { public string FirstName { get; set; } public string LastName { get; set; } //will include values of all 4 forms } //State Interface public interface IState { void SubmitData(RegistrarSessionData data); void ProceedToNextStep(); } //Concrete implementation of IState //Beginning state - no data public class EmptyFormState : IState { private readonly Registrar registrar; public EmptyFormState(Registrar registrar) { this.registrar = registrar; } public void SubmitData(RegistrarSessionData data) { //Should Validation occur here? //Should each state object contain a validation class? (IValidator ?) //Should this throw an exception? } public void ProceedToNextStep() { registrar.State = new BasicInfoCompleteState(registrar); } } //Next step, will have 4 in total public class BasicInfoCompleteState : IState { private readonly Registrar registrar; public BasicInfoCompleteState(Registrar registrar) { this.registrar = registrar; } public void SubmitData(RegistrarSessionData data) { //etc } public void ProceedToNextStep() { //etc } } }

  Read the article

• Why should I bother with unit testing if I can just use integration tests?

  - by CodeGrue

  Ok, I know I am going out on a limb making a statement like that, so my question is for everyone to convince me I am wrong. Take this scenario: I have method A, which calls method B, and they are in different layers. So I unit test B, which delivers null as a result. So I test that null is returned, and the unit test passes. Nice. Then I unit test A, which expects an empty string to be returned from B. So I mock the layer B is in, an empty string is return, the test passes. Nice again. (Assume I don't realize the relationship of A and B, or that maybe two differente people are building these methods) My concern is that we don't find the real problem until we test A and B togther, i.e. Integration Testing. Since an integration test provides coverage over the unit test area, it seems like a waste of effort to build all these unit tests that really don't tell us anything (or very much) meaningful. Why am I wrong?

  Read the article

• Calculating bounding grid coordinates to a user click on google maps/google earth

  - by user170304

  Hello, I have a requirement to calculate the centroid or geodesic midpoint of when a user clicks in between the lat/long grid crossing. The crossing forms a square in most parts of GE and sometimes elongated rectangles. This is due to the shape of the earth of course. I'm looking for a valid mathematical formula that would allow a user to click anywhere in between this grid and then an accurate function (in Javascript or server side code) that would take an assumed grid resolution (say 1km intervals for this discussion) and the input coordinates that should return a centroid coordinate within that graticule grid. To clarify please take a look at the attached image to my google group post: http://google-earth-api.googlegroups.com/web/Picture+5.png?gda=h5oFPz8AAAD315KpovipQeBwdfGpmW3ZhBc9PTADwYa-n193hZ6AItFmHuno63c7phcEXYVuRA6ccyFKn-rNKC-d1pM%5FIdV0&gsc=sz6bbAsAAABBKF7YXWYyc4GmXg-QruHj What I need to be able to do is if a user clicks anywhere in this grid square, I need to find the centroid or center point of that grid intersection/square or at least the bounding grid coordinates (that make the square). If we assume that the grid is UTM standard and has a max resolution of 1km (or make this a parameter), I need to detect the four other points nearby and then calculating the centroid is not as difficult. I welcome any feedback you all may have and appreciate it. I don't have a simple way of letting a user click anywhere on the grid and finding the grid bounding coordinates (making a square of 4 coordinates) or the centroid / midpoint of the graticule grid square necessary. One thought is to use assumptions as much as possible using a reference such as UTM coordinate reference. If I assume that the grid is X degrees wide, can we have a pure javascript function take any input coordinate and return for me the bounding graticule coordinates in Decimal Degrees? Another thought I had was to create the grid in a geo-spatial layer to take any input coordinate and return the nearest centroid of the graticule? Does this make sense? Thanks! Omar

  Read the article

• Crystal Report: Missing Parameter Values

  - by Chintan

  Hi! I am new to Crystal report, application is on ASP.net 3.5 and MySQL 5.1 with, going to develop report with between dates from date and to date, first page of report is shown good but when i tried to navigate on another page i got error like Missing Parameter Values Thanks in advance public partial class BookingStatement : System.Web.UI.Page { //DAL is my Data Access Layer Class //Book is ReportClass DAL obj = new DAL(); Book bkStmt = new Book(); protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { //crvBooking is Crystal Report Viewer //reportFill method is to fill Report reportFill(); crvBooking.EnableViewState = true; crvBooking.EnableParameterPrompt = false; } /* Also try reportFill() out side !IsPostBack but didn't work */ //Check if the parmeters have been shown. /* if ((ViewState["ParametersShown"] != null) && (ViewState["ParametersShown"].ToString() == "True")) { bkStmt.SetParameterValue(0, "20/04/2010"); bkStmt.SetParameterValue(1, "20/04/2010"); }*/ } protected void crvBooking_navigate(object sender, CrystalDecisions.Web.NavigateEventArgs e) { // reportFill(); } protected void reportFill() { //bkStmt.rpt is Report file //bookingstatment is View //bkStmt is ReportClass object of Book string rptPath = "bkStmt.rpt"; string query = "select * from bookingstatment"; crvBooking.RefreshReport(); crvBooking.Height = 600; crvBooking.Width = 900; bkStmt.ResourceName = rptPath; String dtFrm = bkStmt.ParameterFields[0].CurrentValues.ToString(); obj.SetCommandType(CommandType.Text); obj.CommText = query; DataTable dtst = obj.GetDataTable(); crvBooking.ParameterFieldInfo.Clear(); ParameterDiscreteValue discretevalue = new ParameterDiscreteValue(); discretevalue.Value = "20/04/2010"; // Assign parameter ParameterValues values = new ParameterValues(); values.Add(discretevalue); bkStmt.SetDataSource(dtst); ViewState["ParametersShown"] = "True"; crvBooking.EnableViewState = true; bkStmt.DataDefinition.ParameterFields[0].ApplyCurrentValues(values); bkStmt.DataDefinition.ParameterFields[1].ApplyCurrentValues(values); crvBooking.ReportSource = bkStmt; } }

  Read the article

• Recommendations, Asp.Net ObjectDataSource bind result of webservice call

  - by DerDres

  I need recommendations on how to solve / structure a solution to the following problem. In an asp.net web application i'll have to visualise results returned from a web service call. Im planning to use a repeater server control and bind this with an objectdatasource. The service returns a result of the form: public class SearchResult : IExtensibleDataObject { [DataMember] public Guid SearchId { get; set; } [DataMember] public DateTime Timestamp { get; set; } [DataMember] public int Offset { get; set; } [DataMember] public int TotalResults { get; set; } [DataMember] public IList<ResultDocumentData> Documents { get; set; } It is the collection of Documents that I need to visualise with a repeater which will be associated with an ObjectDataSource. The datasource should work on the type ResultDocumentData; the collection property in the class SearchResult. I think I need to wrap the call to the webservice in a dataaccess layer class, that will have a getDocuments method returning an IList, that the ObjectDataSource can use as its SelectMethod. I think I could make this work, but I would like to know how to do it in an elegant way. Can you give me general recommendations and/or recommendations for the following: WebProject Folderstructure + naming Naming conventions for the name of the service wrapper class Creating the service reference

  Read the article

• Trouble Shoot JavaScript Function in IE

  - by CreativeNotice

  So this function works fine in geko and webkit browsers, but not IE7. I've busted my brain trying to spot the issue. Anything stick out for you? Basic premise is you pass in a data object (in this case a response from jQuery's $.getJSON) we check for a response code, set the notification's class, append a layer and show it to the user. Then reverse the process after a time limit. function userNotice(data){ // change class based on error code returned var myClass = ''; if(data.code == 200){ myClass='success'; } else if(data.code == 400){ myClass='error'; } else{ myClass='notice'; } // create message html, add to DOM, FadeIn var myNotice = '<div id="notice" class="ajaxMsg '+myClass+'">'+data.msg+'</div>'; $("body").append(myNotice); $("#notice").fadeIn('fast'); // fadeout and remove from DOM after delay var t = setTimeout(function(){ $("#notice").fadeOut('slow',function(){ $(this).remove(); }); },5000); }

  Read the article

• Database access through collections

  - by Mike

  Hi All, I have an 3 tiered application where I need to get database results and populated the UI. I have a MessagesCollection class that deals with messages. I load my user from the database. On the instantiation of a user (ie. new User()), a MessageCollection Messages = new MessageCollection(this) is performed. Message collection accepts a user as a parameter. User user = user.LoadUser("bob"); I want to get the messages for Bob. user.Messages.GetUnreadMessages(); GetUnreadMessages calls my Business Data provider which in turn calls the data access layer. The Business data provider returns List. My question is - I am not sure what the best practice is here - If I have a collection of messages in an array inside the MessagesCollection class, I could implement ICollection to provide GetEnumerator() and ability to traverse the messages. But what happens if the messages change and the the user has old messages loaded? What about big message collections? What if my user had 10,000 unread messages? I don't think accessing the database and returning 10,000 Message objects would be efficient.

  Read the article

• Importing fixtures with foreign keys and SQLAlchemy?

  - by Chris Reid

  I've been experimenting with using fixture to load test data sets into my Pylons / PostgreSQL app. This works great except that it fails to properly create foreign keys if they reference an auto increment id field. My fixture looks like this: class AuthorsData(DataSet): class frank_herbert: first_name = "Frank" last_name = "Herbert" class BooksData(DataSet): class dune: title = "Dune" author_id = AuthorsData.frank_herbert.ref('id') And the model: t_authors = sa.Table("authors", meta.metadata, sa.Column("id", sa.types.Integer, primary_key=True), sa.Column("first_name", sa.types.String(100)), sa.Column("last_name", sa.types.String(100)), ) t_books = sa.Table("books", meta.metadata, sa.Column("id", sa.types.Integer, primary_key=True), sa.Column("title", sa.types.String(100)), sa.Column("author_id", sa.types.Integer, sa.ForeignKey('authors.id')) ) When running "paster setup-app development.ini", SQLAlchemey reports the FK value as "None" so it's obviously not finding it: 15:59:48,683 INFO [sqlalchemy.engine.base.Engine.0x...9eb0] INSERT INTO books (title, author_id) VALUES (%(title)s, %(author_id)s) RETURNING books.id 15:59:48,683 INFO [sqlalchemy.engine.base.Engine.0x...9eb0] {'author_id': None, 'title': 'Dune'} The fixture docs actually warn that this might be a problem: "However, in some cases you may need to reference an attribute that does not have a value until it is loaded, like a serial ID column. (Note that this is not supported by the SQLAlchemy data layer when using sessions.)" http://farmdev.com/projects/fixture/using-dataset.html#referencing-foreign-dataset-classes Does this mean that this is just not supported with SQLAlchemy? Or is it possible to load the data without using SA "sessions"? How are other people handling this issue?

  Read the article

• Flex 3: should I provide prepared data to my component or make it to process data before display?

  - by grapkulec

  I'm starting to learn a little Flex just for fun and maybe to prove that I still can learn something new :) I have some idea for a project and one of its parts is a tree component which could display data in different ways depending on configuration. The idea There is list of objects having properties like id, date, time, name, description. And sometimes list should be displayed like this: first level: date second level: time third level: name and sometimes like this: first level: year second level: month third level: day fourth level: time and name By level I mean level of nesting of course. So, we can have years, that have months, that have days, that have hours and so forth. The problem What could be the best way to do it? I mean, should I prepare data for different ways of nesting outside of component or even outside of flex? I can do it at web service level in C# where I plan to have database access layer and send to flex nice and ready to display XML or array of objects. But I wonder if that won't cause additional and maybe unneccessary network traffic. I tried to hack some code in my component to convert my data objects into XML or ArrayCollection but I don't know enough of Flex and got stuck on elimination of duplicates or getting specific data by some key value. Usually to do such things I have STL with maps, sets and vectors and I find Flex arrays and even Dictionary a little bit confusing (I've read language reference and googled without any significant luck). The question So, to sum things up: should I give my tree component data prepared just for chosen type of display or should I try to do it internally inside component (or some helper class written in ActionScript)?

  Read the article

• Show me your Linq to SQL architectures!

  - by Brad Heller

  I've been using Linq to SQL for a new implementation that I've been working on. I have about 5000 lines of code and am a little ways from a solid demo. I've been pretty satisfied with Linq to SQL so far -- the tools are excellent and pretty painless and it allows you to get a DAL up and running quickly. That said, there are some major draw backs that I just keep hitting over and over again. Namely how to handle separation of concerns between my DAL and my business layer and juggling that with different data contexts. Here is the architecture I've been using: My repositories do all my data access and they return Linq to SQL objects. Each of my Linq to SQL objects implements an IDetachable interface. A typical implementation looks like this: partial class PaymentDetail : IDetachable { #region IDetachable Members public bool IsAttached { get { return PropertyChanging != null; } } public void Detach() { if (IsAttached) { PropertyChanged = null; PropertyChanging = null; Transaction.Detach(); } } #endregion } Every time I do a DAL operation in my repository I "detach" when I'm done with the object (and it should theoretically detach from any child objects) to remove the DataContext's context. Like I said, this works pretty well, but there are some edge cases that seem to be a big pain in the ass. For instance, my Transaction object has many PaymentDetails. Even when there are no PaymentDetails in that collection it's still attached to the DataContext's context! Thus, if I try to update (I update by Attach()ing to the object and then SubmitChanges()) I get that dreaded "An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported." message. Anyway, I'm starting to doubt that this technology was a good gamble. Has anyone got a decent architecture that they're willing to share? I'd really love to use this technology but I feel like I spend 1/3 of my time just debugging is retarded quirks!

  Read the article

• EAGLContext, EAGLSharegroups, RenderBuffers, FrameBuffers, oh my!

  - by quixoto

  Hi all, I'm trying to wrap my head around the OpenGL object model on iPhone OS. I'm currently rendering into a few different UIViews (build on CAEAGLayers) on the screen. I currently have each of these as using separate EAGLContext, each of which has a color renderbuffer and a framebuffer. I'm rendering similar things in them, and I'd like to share textures between these instances to save memory overhead. My current understanding is that I could use the same setup (some number of contexts, each with a FBO/RBO) but if I spawn the later ones using the EAGLShareGroup of the first one, then I can simply use the texture names (GLuints) from the first one in the later ones. Is this accurate? If this is the case, I guess the followup question is: what's the benefit to having it be a "sharegroup"? Could I just reuse the same context, and attach multiple FBOs/RBOs to that context? I think I'm struggling with the abstraction layer of a sharegroup, which seems to share "objects" (textures and other named things) but not "state" (matrices, enabled/disabled states) which are owned by the context. What's the best way to think of this? Thanks for any enlightenment!

  Read the article

• Squid handling of concurrent cache misses

  - by Oliver H-H

  We're using a Squid cache to off-load traffic from our web servers, ie. it's setup as a reverse-proxy responding to inbound requests before they hit our web servers. When we get blitzed with concurrent requests for the same request that's not in the cache, Squid proxies all the requests through to our web ("origin") servers. For us, this behavior isn't ideal: our origin servers gets bogged down trying to fulfill N identical requests concurrently. Instead, we'd like the first request to proxy through to the origin server, the rest of the requests to queue at the Squid layer, and then all be fulfilled by Squid when the origin server has responded to that first request. Does anyone know how to configure Squid to do this? We've read through the documentation multiple times and thoroughly web-searched the topic, but can't figure out how to do it. We use Akamai too and, interestingly, this is its default behavior. (However, Akamai has so many nodes that we still see lots of concurrent requests in certain traffic spike scenarios, even with Akamai's super-node feature enabled.) This behavior is clearly configurable for some other caches, eg. the Ehcache documentation offers the option "Concurrent Cache Misses: A cache miss will cause the filter chain, upstream of the caching filter to be processed. To avoid threads requesting the same key to do useless duplicate work, these threads block behind the first thread." Some folks call this behavior a "blocking cache," since the subsequent concurrent requests block behind the first request until it's fulfilled or timed-out. Thx for looking over my noob question! Oliver

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >