Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 195/232 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• No HDMI audio in 13.04

  - by King84

  I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

  Read the article

• JavaOne 2012 Call for Papers

  - by Tori Wieldt

  JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012.  originally posted on blogs.oracle.com/javaone

  Read the article

• JavaOne 2012 Call for Papers

  - by Tori Wieldt

  JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012. 

  Read the article

• Is my computer slow due to lack of swap

  - by Kristian Jensen

  A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

  Read the article

• sell ccv good and fresh sell cvv all country fullz info

  - by underworld

  ICQ: 640240418 YH: underworld_cvv Mail: [email protected] WELCOME TO MY UNDERWORLD ! I'm is Professional seller,more than 5 years experience,i started work in 2008,i have sold cvv credit card to many customers all over the world. Selling cvv, fullz many country as: Canada,USA,Australia,UK...all And many country in Europe: Fr,Ger,Spain,Ita... I hope we will work together for a long time. Always sell cvv quality with high balance. I have a website but if you want buy cvv good price please contact me. Have Cvv with Bin or Cvv with DOB,VBV if customer claim. List Price Some Cvv (good price for good buyer) -Us: 5$ /1 -Us VBV-DOB : 8$ /1 -Us fullz : 40$ /1 -Us (amex,discover) : 8$ /1 -Ca : 10$ /1 -Ca DOB : 20$ /1 -Ca fullz : 50$ /1 -Ca with bin : 15$ /1 -Au : 10$ /1 -Au DOB : 20$ /1 -Uk : 10$ /1 -Uk DOB-VBV : 20$ /1 -Fr : 15$ /1 -Fr DOB-VBV : 25$ /1 -Ger : 18$ /1 -Ger with DOB : 25$ /1 -Spain : 15$ /1 -Spain Fullz : 40$ /1 -Ita : 15$ /1 -Ita with DOB : 25$ /1 -Japan : 15$ /1 -Japan with DOB : 25$ /1 Cvv random country -Denmark : 25$ /1 -Sweden : 20$ /1 -Switzerland : 20$ /1 -Slovakia : 20$ /1 -Netherlands : 18$ /1 -Mexico : 15 /1 -Middle East : 18$ /1 -New zeland : 18$ /1 -Asia : 15$ /1 -Ireland : 18$ /1 -Belgium : 15$ /1 -Taiwan : 15$ /1 -UAE : 20$ /1 And many country... Some Bins -Us bins: 517805,488893,492536,408181,542432,482880,374355,374372... -Ca bins: 450003,450008,451242,450060,549198,533833,519123,544612... -Uk bins: 4547,5506,5569,5404,5031,4921,5505,5506,4921,4550... -Ger bins: 492942,490762,530127... -Au bins: 543568,450605,494053,450606,456475,521893,519163... -Fr bins: 497847,497831,497841,497849,497820,497825,497833... -And others bins for others country... Format France fullz Nom : di murro Prenom : mariano Adresse : rue des caillettes Ville : Corbeil Essonnes Code Postale : 91100 Telephone : 33672492372 ========== (2eme Tape) ========== Nom de Bank : crédit agricole Nom de Carte Bancaire : di murro mariano Date de naissance : 12 / 02 / 1969 Type de carte : MasterCard Numero de carte : 5131018223855xxx Numero de compte : Date d'expiration : 10 / 2014 CVN : 336 -WARRANTY time is 12 HOURS. Any cvv purchase over 12 hours can not warranty. -If you buy over 30 cvvs, i will sell for you best price. -I will discount for you if you are reseller or you order everyday many on the next day. -I only accept payment money by PerfectMoney (PM) Western Union (WU) and MoneyGram. -I will prove to you that I am the best sellers. And make sure you will enjoy doing business with me. Contact: ICQ: 640240418 YH: underworld_cvv Mail: [email protected]

  Read the article

• Ati Radeon HD 3200 Graphics driver - Installation Problem

  - by samufi

  I have a fresh installation of Ubuntu 12.04 x86 and I am trying to install the proprietary driver for my "Radeon HD 3200 Graphics" video card. I know that there are already many threads about this topic, but I did not find a solution for my problem: For the installation I followed exactly these instructions: What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? During the process I faced these problems: I executed ~$ debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases and got: debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Keine Berechtigung Can't exec "libstdc++6": Datei oder Verzeichnis nicht gefunden at /usr/share/perl/5.14/IPC/Open3.pm line 186. open2: exec of libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 (translation of the German parts: "Keine Berechtigung" means: "no permission"; "Datei oder Verzeichnis nicht gefunden" means: "File or folder not found") Because I had no idea if it was a big issue, I just continued: ~$ sudo apt-get install ia32-libs There I got: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst wurde oder nur aus einer anderen Quelle verfügbar ist. E: Paket »ia32-libs« hat keinen Installationskandidaten (Translation: [...] the package ia32-libs is not available but is referenced by an other package [...] E: package »ia32-libs« has no installation candidate) Once more I went on. The next steps worked quite fine. But when I came to the point: ~$ sudo dpkg -i *.deb There I got A popup message, something like there was a problem with a system application but in the terminal no errors were reported, also the packages seemed to be installed. so now the Ati Catalyst Center works amdcccle but fglrxinfo gave me X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 So there is something wrong. (Also there is not the possibility to enable these nice graphical features - the reason why I installed the proprietary driver) Because I worked with a completely fresh Installation I don't know how to fix the problem. If anybody could help I would be very tahnkful! =)

  Read the article

• How I might think like a hacker so that I can anticipate security vulnerabilities in .NET or Java before a hacker hands me my hat [closed]

  - by Matthew Patrick Cashatt

  Premise I make a living developing web-based applications for all form-factors (mobile, tablet, laptop, etc). I make heavy use of SOA, and send and receive most data as JSON objects. Although most of my work is completed on the .NET or Java stacks, I am also recently delving into Node.js. This new stack has got me thinking that I know reasonably well how to secure applications using known facilities of .NET and Java, but I am woefully ignorant when it comes to best practices or, more importantly, the driving motivation behind the best practices. You see, as I gain more prominent clientele, I need to be able to assure them that their applications are secure and, in order to do that, I feel that I should learn to think like a malevolent hacker. What motivates a malevolent hacker: What is their prime mover? What is it that they are most after? Ultimately, the answer is money or notoriety I am sure, but I think it would be good to understand the nuanced motivators that lead to those ends: credit card numbers, damning information, corporate espionage, shutting down a highly visible site, etc. As an extension of question #1--but more specific--what are the things most likely to be seeked out by a hacker in almost any application? Passwords? Financial info? Profile data that will gain them access to other applications a user has joined? Let me be clear here. This is not judgement for or against the aforementioned motivations because that is not the goal of this post. I simply want to know what motivates a hacker regardless of our individual judgement. What are some heuristics followed to accomplish hacker goals? Ultimately specific processes would be great to know; however, in order to think like a hacker, I would really value your comments on the broader heuristics followed. For example: "A hacker always looks first for the low-hanging fruit such as http spoofing" or "In the absence of a CAPTCHA or other deterrent, a hacker will likely run a cracking script against a login prompt and then go from there." Possibly, "A hacker will try and attack a site via Foo (browser) first as it is known for Bar vulnerability. What are the most common hacks employed when following the common heuristics? Specifics here. Http spoofing, password cracking, SQL injection, etc. Disclaimer I am not a hacker, nor am I judging hackers (Heck--I even respect their ingenuity). I simply want to learn how I might think like a hacker so that I may begin to anticipate vulnerabilities before .NET or Java hands me a way to defend against them after the fact.

  Read the article

• MythTV lost recordings - "No recordings available" and no recording rules either

  - by nimasmi

  I have a c.6 year old mythtv database. I recently upgraded from Ubuntu 10.04 to 12.04. This brought a MythTV upgrade from 0.24 to 0.25, which went well. Today, all my recordings have disappeared. They still exist in the /var/lib/mythtv/recordings folder, and the 'M' key in the Watch Recordings page says that there are 201 recordings available somewhere, but they will not display. See screenshot: (implicit thanks to whomever upvoted this, giving me sufficient reputation to upload images) Changing the filter does not remedy the fact that there is nothing shown in the lists. My Upcoming Recordings screen says that there are no rules set, but my list of previously recorded shows is still there, and has an entry from as recently as 3am today. mythbackend --printsched gives the following: user@box:~$ mythbackend --printsched 2012-09-22 12:59:20.537008 C mythbackend version: fixes/0.25 [v0.25.2-15-g46cab93] www.mythtv.org 2012-09-22 12:59:20.537043 C Qt version: compile: 4.8.1, runtime: 4.8.1 2012-09-22 12:59:20.537048 N Enabled verbose msgs: general 2012-09-22 12:59:20.537076 N Setting Log Level to LOG_INFO 2012-09-22 12:59:20.537142 I Added logging to the console 2012-09-22 12:59:20.537152 I Added database logging to table logging 2012-09-22 12:59:20.537279 N Setting up SIGHUP handler 2012-09-22 12:59:20.537373 N Using runtime prefix = /usr 2012-09-22 12:59:20.537394 N Using configuration directory = /home/user/.mythtv 2012-09-22 12:59:20.537999 I Assumed character encoding: en_GB.UTF-8 2012-09-22 12:59:20.538599 N Empty LocalHostName. 2012-09-22 12:59:20.538610 I Using localhost value of box 2012-09-22 12:59:20.538792 I Testing network connectivity to '192.168.1.2' 2012-09-22 12:59:20.539420 I Starting process manager 2012-09-22 12:59:20.541412 I Starting IO manager (read) 2012-09-22 12:59:20.541715 I Starting IO manager (write) 2012-09-22 12:59:20.541836 I Starting process signal handler 2012-09-22 12:59:20.684497 N Setting QT default locale to EN_GB 2012-09-22 12:59:20.684694 I Current locale EN_GB 2012-09-22 12:59:20.684813 N Reading locale defaults from /usr/share/mythtv//locales/en_gb.xml 2012-09-22 12:59:20.697623 I New static DB connectionDataDirectCon 2012-09-22 12:59:20.704769 I MythCoreContext: Connecting to backend server: 192.168.1.2:6543 (try 1 of 1) Calculating Schedule from database. Inputs, Card IDs, and Conflict info may be invalid if you have multiple tuners. 2012-09-22 12:59:27.710538 E MythSocket(21dfcd0:14): readStringList: Error, timed out after 7000 ms. 2012-09-22 12:59:27.710592 C Protocol version check failure. The response to MYTH_PROTO_VERSION was empty. This happens when the backend is too busy to respond, or has deadlocked in due to bugs or hardware failure. Things I have tried so far: restart the backend restart the frontend run mythtv-setup and check database passwords and IP addresses change the frontend setting for backend IP from localhost to 192.168.1.2 (the backend/frontend's IP) run optimize_mythdb.pl Other suggestions appreciated.

  Read the article

• How to create wifihotspot in ubuntu 10.04 LTS

  - by aspdeepak

  I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

  Read the article

• sell skimmed dump+pin([email protected])wu transfer,bank transfer,paypal+mailpass

  - by bestseller

  http://megareserve.blogspot.com///////// [email protected]////gmail:[email protected] Sell, Cvv, Bank Logins, Tracks, PayPal, Transfers, WU, Credit Cards, Card, Hacks, Citi, Boa, Visa, MasterCard, Amex, American Express, Make Money Fast, Stolen, Cc, C++, Adder, Western, Union, Banks, Of, America, Wellsfargo, Liberty, Reserve, Gram, Mg, LR, AlertPay ..PAYMENT METHOD LIBERTYRESERVE AND WESTERNUNION ONLY........ Ccv EU is $ 6 per ccv (Visa + Master) Ccv EU is $ 7 per ccv (Amex + Discover) Ccv Au is $ 6 per ccv Ccv Italy is 15 $ per cc sweden 12$ spain 10$ france 12$ Ccv US is $ 1.5 per ccv (Visa) Ccv US is $ 2 per ccv (master) Ccv US is $ 3 per ccv (Amex + Discover) Ccv UK is $ 5 per ccv (Visa + Master) Ccv UK is $ 6 per ccv (Amex + swith) Ccv Ca is $ 6 per ccv (Visa+ Master) Ccv Ca is $ 9 per ccv (Visa Business + Visa Gold) Ccv Germany is 14$ Per Ccv Ccv DOB with US is 15 $ per ccv Ccv DOB with UK is 19 $ per ccv Ccv DOB + BIN with UK 25$ per ccv Ccv US full info is 40 $ per ccv Ccv UK full info is 60 $ per ccv 1 Uk check bins= 12.5$/1cvv 1 Sock live = 1$/1sock live 5day yahoo:[email protected] gmail:[email protected] Balance In Chase:.........70K To 155K ========300$ Balance In Wachovia:.........24K To 80K==========180$ Balance In Boa..........75K To 450K==========400$ Balance In Credit Union:.........Any Amount:=========420$ Balance In Hallifax..........ANY AMOUNT=========420$ Balance In Compass..........ANY AMOUNT=========400$ Balance In Wellsfargo..........ANY AMOUNT=========400$ Balance In Barclays..........80K To 100K=========550$ Balance In Abbey:.........82K ==========650$ Balance in Hsbc:.........50K========650$ and more 1 Paypal with pass email = 50$/paypal 1 Paypal don't have pass email = 20$/Paypal 1 Banklogin us or uk (personel)= 550$ yahoo :[email protected] gmail :[email protected] Track 1/2 Visa Classic, MasterCard Standart US - 13$ UK - 17$ EU - 24$ AU - 26$ Track 1/2 Visa Gold | Platinum | Business | Signature, MasterCard Gold | Platinum US - 17$ UK - 20$ EU - 28$ AU - 30$ Bank transfer Balance 71.000$ CITIBANK SOUTH DAKOTA, N.A. Balance 65.000$ Wachovia: 76.000$ Abbey: 65.000£ Hsbc : 87.000$ Hallifax : 97.000£ Barclays: 110.000£ AHLI UNITED BANK --- 80.000£ LLOYDSTSB ---------- 100.000£ BANK OF SCOTLAND --- 123.000£ BOA ----------210.000$ UBS ---------- 152.000$ RBC BANK ------ 245.000$ BANK OF CANADA -------- 78.000$ BDC ---------- 281.000$ BANK LAURENTIENNE ----- 241.000$ please no test yahoo: [email protected] gmail: [email protected] website ; http://megareserve.blogspot.com Prices For Bin and Its List: 5434, 5419, 4670,374288,545140,454634,3791 with d.o.b,4049,4462,4921.4929.46274547,5506,5569,5404,5031,4921, 5505,5506,4921,4550 ,4552,4988,5186,4462,4543,4567 ,4539,5301,4929,5521 , 4291,5051,4975,5413 5255 4563,4547 4505,4563 5413 5255,5521,5506,4921,4929,54609 7,5609,54609,4543, 4975,5432,5187 ,4973,4627,4049,4779,426565,55 05, 5549, 5404, 5434, 5419, 4670,456730,541361, 451105,4670,5505, 5549, 5404, UK Nomall NO BINS(Serial) with DOB is :10$ UK with BINS(Serial) with DOB is :15$ UK Nomall no BINS(Serial) no DOB is: 6$ UK with BINS(Serial) is :12$ Please do not request : cc for TEST and FREE. DON'T CONTACT ME IF YOU NOT READY NEED TO BUY .

  Read the article

• SQL – Contest to Get The Date – Win USD 50 Amazon Gift Cards and Cool Gift

  - by Pinal Dave

  If you are a regular reader of this blog – you will find no issue at all in resolving this puzzle. This contest is based on my experience with NuoDB. If you are not familiar with NuoDB, here are few pointers for you. Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB Quick Start with Admin Sections of NuoDB – Manage NuoDB Database Quick Start with Explorer Sections of NuoDB – Query NuoDB Database In today’s contest you have to answer following questions: Q 1: Precision of NOW() What is the precision of the NuoDB’s NOW() function, which returns current date time? Hint: Run following script on NuoDB Console Explorer section: SELECT NOW() AS CurrentTime FROM dual; Here is the image. I have masked the area where the time precision is displayed. Q 2: Executing Date and Time Script When I execute following script - SELECT 'today' AS Today, 'tomorrow' AS Tomorrow, 'yesterday' AS Yesterday FROM dual; I will get the following result:   NOW – What will be the answer when we execute following script? and WHY? SELECT CAST('today' AS DATE) AS Today, CAST('tomorrow' AS DATE) AS Tomorrow, CAST('yesterday'AS DATE) AS Yesterday FROM dual; HINT: Install NuoDB (it takes 90 seconds). Prizes: 2 Amazon Gifts 2 Limited Edition Hoodies (US resident only)   Rules: Please leave an answer in the comments section below. You must answer both the questions together in a single comment. US resident who wants to qualify to win NuoDB apparel please mention your country in the comment. You can resubmit your answer multiple times, the latest entry will be considered valid. Last day to participate in the puzzle is June 24, 2013. All valid answer will be kept hidden till June 24, 2013. The winner will be announced on June 25, 2013. Two Winners will get USD 25 worth Amazon Gift Card. (Total Value = 25 x 2 = 50 USD) The winner will be selected using a random algorithm from all the valid answers. Anybody with a valid email address can take part in the contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Wireless Problem on HP Pavillion G6

  - by user47954

  I have a broadcom wireless card in my laptop and the wireless is not working correctly. right in front of the router the wireless signal is 70% and across the room it barely works and in another room it disconnects. i have the drivers and everything. i am running ubuntu 11.10 64bit.it works perfectly in windows 7. can anyone help! 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9649] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7804] Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) Kernel modules: i2c-piix4 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a0] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a1] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a2] Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Kernel driver in use: r8169 Kernel modules: r8169 07:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Kernel driver in use: wl Kernel modules: wl 08:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)

  Read the article

• Networking Guidelines

  - by ACShorten

  One of the things I have noticed in my years in IT is the changes in networking. In the past networking was pretty simple with the host name and name resolution (via DNS) being pretty simple. Some sites still use this simple networking setup. These days, more complex name resolution, proxies, firewalls, demarcation nd virtualization, can make networking more complex. This can cause issues when installing products with in built networking that can frustrate even seasoned veterans. I have put together a few basic guidelines to hopefully help along with product installation and getting a product to operate in a somewhat complex network setup. All the components of the product (including the infrastructure) need to communicate via a network (even it is within a local machine/host). Ensure any host names referred to within configuration files are accessible via your networking setup. This may mean defining the hosts to the machines, to the DNS for name resolution and even your firewall to allow machines to communicate within your network. Make sure the ports used for any of the infrastructure are accessible (even through your firewall) and are unique within the host. Host duplication can cause the product to fail on startup as the port is already in use. If there are still issues, consider using localhost as your host name. I have used this in so many situations that I tend to use it now as a default anytime I install anything myself. Most Oracle products suggest to use localhost when using dynamic host or dynamic IP addresses and this is no different for the Oracle Utilities Application Framework. If you do use localhost then installing a Loopback Adapter for the operating system is recommended to force networking to a minimum. Usually localhost resolves to 127.0.0.1. When using multiple network connections, especially in a virtualized environment, ensure the host and ports used are relevent for the network cards you have setup. One of the common issues is finding the product is using a vierualized network card only to find that it is not setup for correct networking. If you are using the batch component, do not forget to ensure that the multicast protocol is enabled on your host and that the multicast address and port number specified are valid and accessible from all machines in the batch cluster (if clustering used). The same advice applies if you are using unicast where each host/port combination should be accessible. Hopefully these basic networking recommendations will help minimize any networking issues you might encounter.

  Read the article

• WebLogic Partner Community Newsletter June 2013

  - by JuergenKress

  Dear WebLogic Partner Community member, This month newsletter contains tons of Java material with the availability of Java EE7! Including many articles in the May/June Java Magazine and the Duke Award nomination! Thanks for all your efforts to become certified and Specialized. For all the experts who achieved the WebLogic Server 12c Certified Implementation Specialist  or ADF 11g Certified Implementation Specialist you can download a logo for your blog or business card at the Competence Center. For all the companies who achieved a WebLogic and ADF Specialization you can request a nice plaque for your office. Summer time is training time – make sure you attend our Fusion Middleware Summer Camps or one of our upcoming Exalogic Implementation Workshop by PTS in Spain, Turkey and Middle East. For those who can not make it we offers plenty of online courses like the New ADF Academy. Or the webcast The value of Engineered Systems for SAP. At our WebLogic Community Workspace (WebLogic Community membership required) you can find Engineered Systems Strategy presentation. Thanks to the community for all the WebLogic best practice papers and tools like Automated provision of Oracle Weblogic Server Platform & Frank’s Coherence videos on YouTube & Create and deploy applications on the Oracle Java Cloud & WebLogic Application redeployment using shared libraries - without downtime & Oracle Traffic Director. The first tests deployments for WebLogic on Oracle Database Appliance are on the way, thanks to all who are their experience: Sizing & Configuration and Traffic Director. Virtualised Oracle Database Appliance Proof of Concept - #1 Planning from Simon Haslam. Would be great if you can also share your experience via twitter @wlscommunity! In the ADF section of the newsletter you find Tuning Application Module Pools and Connection Pools & List View - Cool Looking ADF PS6 Component for Collections & Insider Essential & User Interface & Skinning & Oracle Forms to ADF Modernization reference. Great summer time! Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsJune2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Ubuntu on Pandaboard giving me troubles

  - by Jeroen Jacobs

  I'm trying to install the OMAP4 extras for ubuntu on my pandaboard. For some reason, a few packages can't seem to be agree with eachother. This what I did so far: installed on Ubuntu 11.10 on sd card Powered on Pandaboard and let it finish it's initial install Did an "apt-get update" and "apt-get upgrade", to install updates So far, everything went fine, and I was quite happy with my Pandaboard, but then I made the mistake of typing this: apt-get install ubuntu-imap4-extras At first, everything seemed ok, and it started downloading and installing. But then after a while it just crashed. I tried it again but then it gave me this: Reading package lists... Done Building dependency tree Reading state information... Done ubuntu-omap4-extras is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: gstreamer0.10-openmax : Depends: gstreamer0.10-plugins-bad but it is not going to be installed gstreamer0.10-plugin-ducati : Depends: gstreamer0.10-plugins-bad but it is not going to be installed ubuntu-omap4-extras-multimedia : Depends: gstreamer0.10-plugins-bad (>= 0.10.22-2ubuntu4+ti1.5) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So I tried to the suggestion: apt-get -f install: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: gstreamer0.10-plugins-bad The following NEW packages will be installed: gstreamer0.10-plugins-bad 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 88 not fully installed or removed. Need to get 0 B/1,794 kB of archives. After this operation, 4,571 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 143575 files and directories currently installed.) Unpacking gstreamer0.10-plugins-bad (from .../gstreamer0.10-plugins bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb) ... dpkg: error processing /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb (--unpack): trying to overwrite '/usr/lib/libgstbasecamerabinsrc-0.10.so.0.0.0', which is also in package gstreamer0.10-plugins-good 0.10.30-1ubuntu7.1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Seems like two packages (plugins-good and plugins-bad) are fighting over the same library. Any idea on how to fix this??

  Read the article

• ATI (fglrx) Dual monitor / laptop hot-plugging

  - by Brendan Piater

  I feel like I've gone back 5 years on my desktop today. I'll try not dump to much frustration here... I been running 12.04 since alpha with the ATI open source drivers and the gnome 3 desktop. I been generally very happy with them with only small issues along the way. Now of course it does not support 3D acceleration 100%, so games like my newly purchased Amnesia from the Humble bundle would not play. OK, no worries, the ATI driver is in the repos so let me have a go I thought. With all this testing that's been done with multi-monitor support, what could go wrong...? How I use my computer: It's laptop, with a HD 3670 card in it. I spend about 50% of the time working directly on the laptop (at home) and about 50% of the time working with an additional display connected (at work), multi desktop environment. What happening now: installed drivers things seemed to working, save some small other bugs (not critical) this morning I take my machine and plug the additional monitor into it, and nothing happens... ok fine. open "displays" try configure dual display, won't work open ati config "thing" (cause it is a thing, a crap thing) and set-up monitors there reboot it says (oh ffs, really.... ok) reboot, login and wow, I got a gnome 2 desktop (presume gnome 3 fall back) and no multi-monitor...great. (screenshot: http://ubuntuone.com/5tFe3QNFsTSIGvUSVLsyL7 ) after getting into a situation where I had to Ctrl + Alt + Del to get out of a frozen display, I eventually manage to set-up a single display desktop on the "main" monitor ok.. time to go home... unplug monitor... nothing happens.. oh boy here we go... try displays again, nothing, just hangs the display.. great. crash all the apps and reboot... So it's been a trying day... What I really hope is that someone else has figured out how to avoid this PAIN. Please help with a solution that: allows me run fglrx (so I can run the games I want) allows me to hot-plug a monitor to my laptop and remove it again allows me to change the display so include the hot-plugged monitor (preferable automatically like it did with the open drivers) Next best if that's not possible: switch between laptop only display and monitor only display easily (i.e. not having to reboot/logout/suspened etc) Really appreciate the time of anyone that has a solution. Thanks in advance. Regards Brendan PS: I guess I should file a bug about this too, so some direction as to the best place to file this would be appreciated too.

  Read the article

• SQL – What ACID stands in the Database? – Contest to Win 24 Amazon Gift Cards and Joes 2 Pros 2012 Kit

  - by Pinal Dave

  We love puzzles. One of the brain’s main task is to solve puzzles. Sometime puzzles are very complicated (e.g Solving Rubik Cube or Sodoku)  and sometimes the puzzles are very simple (multiplying 4 by 8 or finding the shortest route while driving). It is always to solve puzzle and it creates an experience which humans are not able to forget easily. The best puzzles are the one where one has to do multiple things to reach to the final goal. Let us do something similar today. We will have a contest where you can participate and win something interesting. Contest This contest have two parts. Question 1: What ACID stands in the Database? This question seems very easy but here is the twist. Your answer should explain minimum one of the properties of the ACID in detail. If you wish you can explain all the four properties of the ACID but to qualify you need to explain minimum of the one properties. Question 2: What is the size of the installation file of NuoDB for any specific platform. You can answer this question following format – NuoDB installation file is of size __ MB for ___ Platform. Click on the Download the Link and download your installation file for NuoDB. You can post figure out the file size from the properties of the file. We have exciting content prizes for the winners. Prizes 1) 24 Amazon Gift Cards of USD 10 for next 24 hours. One card at every hour. (Open anywhere in the world) 2) One grand winner will get Joes 2 Pros SQL Server 2012 Training Kit worth USD 249. (Open where Amazon ship books). Amazon | 1 | 2 | 3 | 4 | 5  Rules The contest will be open till July 21, 2013. All the valid comments will be hidden till the result is announced. The winners will be announced on July 24, 2013. Hint: Download NuoDB  Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Radeon HD 2000, 3000, 4000 on 12.10 Quantal: fglrx (legacy) 12.6 unsupported, what to do?

  - by Andrew Mao

  After upgrading to 12.10 quantal, the packaged version of fglrx no longer works. I discovered that this is because there is a separate 'legacy' fglrx driver for the HD 2k-4k series cards, but it is incompatible with the xorg server on 12.10. This is the most current version of the driver for HD 2000 through HD 4000 series cards. You can't use the non-legacy fglrx driver, but you can use the open-source radeon driver if you prefer your WM compositing to be laggy and your YouTube videos to play like they would on a Pentium MMX series: http://support.amd.com/us/kbarticles/Pages/catalyst126legacyproducts.aspx Usually this driver can be installed in the following way, necessary because apt-get install fglrx would pull in the non-legacy driver: wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip unzip amd-driver-installer-* sudo sh ./amd-driver-installer-*.run --buildpkg Ubuntu/quantal sudo dpkg -i fglrx*.deb sudo aticonfig --initial -f If you use a different version of fglrx (for example, a newer 12.9 that doesn't support those cards) then the final command will give you an error no supported hardware detected or something similar. However, everything works at this point and you will get a reasonable xorg.conf: ... other stuff Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection ... other stuff At this point you're supposed to reboot and everything will be working with the fglrx driver. However, upon rebooting, you'll be treated to the following errors in Xorg.0.log when fglrx attempts to load: (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: noXFree86DRIExtension Some searching around will show that this is a problem with the legacy ATI drivers not supporting xserver 1.13 or newer. (Arch Linux thread) ATI has released a fixed driver for its most recent (HD 5000 series or later) cards, but not for the 'legacy' cards yet. The non-legacy ATI drivers can't be used with the old cards. What should an Ubuntu user, using one of these HD 2000-4000 series cards, do? Wait for an updated 'legacy' ATI driver that properly works with xserver 1.13? Downgrade back to 12.04 Precise, which uses xserver 1.11? Try to downgrade xserver on 12.10 Quantal to 1.12, which could possibly break Unity and GNOME? Forced upgrade to HD 5000 series or later card? (Not possible with integrated graphics...) Some other 1337 action that fixes this problem painlessly?

  Read the article

• Is Infiniband going to get squeezed by iWARP and external QPI?

  - by andy.grover

  The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• how do I get dual monitors to work properly in Ubuntu 11.10 on a Dell Latitude D630?

  - by wes cook

  I have spent a lot of time trying to get dual monitors to work on Ubuntu 11.10 on my Dell Latitude D630 (nVidia NVS 135m video card). - For starters, the System Displays settings app always only showed one unknown monitor, even though I had the external Acer monitor connected. - So I downloaded and installed the nVidia drivers. According to what I read I would need to only use the nVidia driver app (nVidia X Server Settings), so that's what I've done. (System Displays settings continued to only show a single monitor anyway). - nVidia settings app only showed on monitor until I changed the BIOS setting to use the onboard video for external monitor (not the dock video, which it was set to, even though I don't have a docking station). - The nVidia setting app now recognized both monitors. So, I setup the X Server display config as Separate X screen for both monitors. My laptop screen shows up as AUO 1440x900 and my external monitor as Acer E211H 1920x1080. - Everything seemed like it would work, but the external monitor was just a complete white screen. The external monitor was non-functional, even though sometimes it would show the background image - still nothing would show up over there. - So, I checked the Enable Xinerama box. - Now, after logging out and back in, the wallpaper extends to both screens but I get no taskbar at the bottom or top, no system menus, and I have to press the power button to restart or log off. - After experimenting with all the shells, the only one that shows the menus and taskbars when I log in is Gnome Classic. - This is pretty much the same symptoms as found here: How do I fix 11.10 GUI?. - So, I resign myself to the older shell. - Everything works fine until ... I unplug the external monitor ... this is a laptop after all. - Anyway, after doing some work on the road, I plug back in and I still see both screens and it's functional except, ... - Now, the laptop screen (with the taskbar and menu bar) has 4 black bars at the top that windows cannot cover. The top bar is the menu bar (with Applications, Places, the date and time and the system menu on the right). But the next 3 bars (the same height as the top menu bar) are empty and are just reducing the max size of windows on that screen. - See screenshot here: http://i39.tinypic.com/35d2kh1.png - So ... 1. How do I get rid of those extra 3 black bars? They're taking valuable screen space. 2. (less critical) How do I successfully use both screens in the Ubuntu or Ubuntu 2D shell?

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• Atheros AR928X wireless connection makes neighbourhood machine drop off line

  - by funicorn

  I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• How to set the monitor to its native resolution when xrandr approach isn't working?

  - by Krishna Kant Sharma

  I am trying to setup my Samsung syncmaster B2030 monitor in ubuntu 12.04. It's native resolution is 1600x900 which I am not getting in ubuntu and which I am trying to get. I tried using xrandr approach provided in these urls: 1) http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html 2) How to set the monitor to its native resolution which is not listed in the resolutions list? S1) I used cvt 1600 900 60 to get the modeline. Output was: # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync S2) I then used xrandr and output was: Screen 0: minimum 8 x 8, current 1152 x 864, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) which gave me "VGA-0". S3) Then I used xrandr --newmode "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync But instead of adding the modeline it just threw an error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 29 Current serial number in output stream: 29 My system details: 1) ubuntu 12.04 LTS 2) Graphic card: GeForce 9400 GT/PCIe/SSE2 (driver is successfully installed. I am checking it in System Settings Details. And it's showing that driver is installed and its "GeForce 9400 GT/PCIe/SSE2") 3) Monitor: Samsung syncmaster B2030 4) Resolutions I am getting: 800x600 1024x768 1152x864 (I am currently using this one) 1360x768 (this one isn't working properly) Does anyone know what I can do? Thanks in advance. UPDATE (1): Today I tried it again. And adding a modeline (using --newmode) worked. But when I used --addmode by: xrandr --addmode VGA-0 1600x900_60.00 It gave this error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >