Search Results

Search found 44090 results on 1764 pages for 'working conditions'.

Page 197/1764 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

  • Does the method of adjustment matter, or just the final calibration?

    - by Steve
    A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

    Read the article

  • Do [sprite stopActionByTag: kTag]; working differently for different CCActions ?

    - by srikanth rongali
    //prog 1 -(void)gameLogic:(ccTime)dt { id actionMove = [CCMoveTo actionWithDuration:1.0 position:ccp(windowSize.width/2-400, actualY)]; [actionMove setTag:6]; [self schedule:@selector(update:)]; [hitBullet runAction:actionMove]; } -(void)update:(ccTime)dt { if ( (CGRectIntersectsRect(hitRect, playerRect)) ) { [[[self getActionByTag:6] retain] autorelease]; [hitBullet stopActionByTag: 6]; } } //prog 2 -(void)gameLogic:(ccTime)dt { id actionMove = [CCMoveTo actionWithDuration:1.0 position:ccp(windowSize.width/2-400, actualY)]; id hitBulletAction = [CCSequence actionWithDuration:(intervalforEnemyshoot)]; id hitBulletSeq = [CCSequence actions: hitBulletAction, actionMove, nil]; [hitBulletSeq setTag:5]; [self schedule:@selector(update:)]; [hitBullet runAction:hitBulletSeq]; } -(void)update:(ccTime)dt { if ( (CGRectIntersectsRect(hitRect, playerRect)) ) { [[[self getActionByTag:5] retain] autorelease]; [hitBullet stopActionByTag: 5]; } } While prog1 is working prog2 is not working ? I think the both are same. But why the two stopActions are working differently in two prog1 and prog2 ? I mean the actions are stopped in prog1 but the actions are not stopping in prog2 ? thank You.

    Read the article

  • what to do when you are completely burnt out from working on a project ?

    - by dfafa
    so i started this SaaS project around July 2009, was expecting to finish it in 2 months. i ended up working on it for about 4 months straight, spending about 6~12 hours nearly everyday. then one day i just couldn't bare to look at the code. it seems like my efforts are being sucked in by some black hole. i would need to put lot of work to make incremental changes. i felt burnt out in December....and now it's May. i am working on the project maybe for about 10 hours every 2 weeks...i am not getting much done. it seems like it will never be perfect. the more i code, more problems and bugs to fix, its absolutely sickening. so what should i do now ? i have invested all of my available time and money, i've shut off all social connections and basically have been spending most of my time in my room working on my project alone. i feel consumed by this project i created ironically, to make my life easier.

    Read the article

  • Looking for out-of-place directories in an SVN working copy?

    - by jthg
    An annoyance that I sometimes come across with SVN is the working copy getting corrupted by one of the .svn folders getting moved from its original location. It doesn't happen often if you're careful and use the proper tools for all moves and renames, but it still somehow happens from time to time. First, does anyone know if there's a good way to catch the problem before a commit is even done? Cruise control usually catches the problem, but there are plenty of cases it wouldn't catch. Second, is there a quick and easy way to check for out-of-place .svn folder if I suspect that there is one? I can definitely do it manually by deducing what directory is out of place based on the compiler errors or by diffing the working copy with another clean checkout. But, this seems like a problem that SVN can diagnose in a second by giving me a list of all directories whose parent directory in the working copy doesn't match its parent directory in the repository. There there some way to have SVN give me a list like that? Thanks.

    Read the article

  • CakePHP: How can I change this find call to include all records that do not exist in the associated

    - by Stephen
    I have a few tables with the following relationships: Company hasMany Jobs, Employees, and Trucks, Users I've got all my foreign keys set up properly, along with the tables' Models, Controllers, and Views. Originally, the Jobs table had a boolean field called "assigned". The following find operation (from the JobsController) successfully returns all employees, all trucks, and any jobs that are not assigned and fall on a certain day for a single company (without returning users by utilizing the containable behavior): $this->set('resources', $this->Job->Company->find('first', array( 'conditions' => array( 'Company.id' => $company_id ), 'contain' => array( 'Employee', 'Truck', 'Job' => array( 'conditions' => array( 'Job.assigned' => false, 'Job.pickup_date' => date('Y-m-d', strtotime('Today')); ) ) ) ))); Now, since writing this code, I decided to do a lot more with the job assignments. So I've created a new model "Assignment" that belongsTo Truck and belongsTo Job. I've added the hasMany Assignments to both the Truck model and the Jobs Model. I have both foreign keys in the assignments table, along with some other assignment fields. Now, I'm trying to get the same information above, only instead of checking the assigned field from the job table, I want to check the assignments table to ensure that the job does not exist there. I can no longer use the containable behavior if I'm going to use the "joins" feature of the find method due to mysql errors (according to the cookbook). But, the following query returns all jobs, even if they fall on different days. $this->set('resources', $this->Job->Company->find('first', array( 'joins' => array( array( 'table' => 'employees', 'alias' => 'Employee', 'type' => 'LEFT', 'conditions' => array( 'Company.id = Employee.company_id' ) ), array( 'table' => 'trucks', 'alias' => 'Truck', 'type' => 'LEFT', 'conditions' => array( 'Company.id = Truck.company_id' ) ), array( 'table' => 'jobs', 'alias' => 'Job', 'type' => 'LEFT', 'conditions' => array( 'Company.id = Job.company_id' ) ), array( 'table' => 'assignments', 'alias' => 'Assignment', 'type' => 'LEFT', 'conditions' => array( 'Job.id = Assignment.job_id' ) ) ), 'conditions' => array( 'Job.pickup_date' => $day, 'Company.id' => $company_id, 'Assignment.job_id IS NULL' ) )));

    Read the article

  • How do I get my Apache virtual hosts working?

    - by elliot100
    I'm trying to set up virtual hosts for local development and can't seem to get it working. I have this in my httpd.conf: NameVirtualHost * <VirtualHost *> ServerName localhost DocumentRoot C:/Users/Elliot/dev/UniServer/www </VirtualHost> <VirtualHost *> ServerName drupal.dev DocumentRoot C:/Users/Elliot/dev/UniServer/www/drupal.dev/httpdocs </VirtualHost> and this in C:\Windows\System32\drivers\etc\hosts: 127.0.0.1 localhost 127.0.0.1 drupal.dev http://localhost resolves OK, http://drupal.dev/ does not. Any ideas welcomed...

    Read the article

  • XenServer 5.6.1-fp1. Can't get network working

    - by bakytn
    I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed)

    Read the article

  • How to get headphones and speakers working at the same time?

    - by Borek
    I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

    Read the article

  • How do I get the Windows 8 Desktop to stop refreshing itself while I'm working?

    - by Nessa Morris
    I have an Asus touchscreen laptop with Windows 8, not RT. The best way that I can describe the problem is: when I am working on something in the desktop, the desktop/screen refreshes itself. It doesn't matter if I am using an IE window, or Word, etc. Basically, while I'm viewing the desktop, the icons disappear for a second or two and then come back. If I'm typing in Word, the screen essentially pauses and just stops typing. It won't start typing again until I touch the screen or click on something. In IE, the screen acts pretty similar, if I happen to be typing a URL, or in a form, etc. Why does it do this? And how can I make it stop? Thanks so much for any help you can give me, and please let me know if I can provide any other info that you think may be helpful.

    Read the article

  • How can I get 32-bit Direct3D working on my 64-bit Windows 7 system?

    - by Daniel Stutzbach
    I recently upgraded a Dell Inspiron 6400 to Windows 7 Ultimate 64-bit. I have a 32-bit 3D application that refuses to run, giving an error of "Failed to initialise [sic] Direct3D device". The dxdiag tool tells me: DirectDraw Acceleration: Enabled Direct3D Acceleration: Not Available However, the 64-bit version of dxdiag tells me: DirectDraw Acceleration: Enabled Direct3D: Enabled I have installed and re-installed the latest graphics drivers, as well as the DirectX 9 redistributable, but it stills fails in the same way. dxdiag reports the chipset name as the "Mobile Intel(R) 945 Express Chipset Family" with the the Chip Type as "Intel(R) GMA 950". The main driver is igdumd64.dll, version 8.15.10.1930. How can I get 32-bit Direct3D working?

    Read the article

  • What is the best answer for: "my Internet is not working"?

    - by Maciek Sawicki
    Hi, I look for work in IT Support. One of interview questions is: what would you first say if user call You and tell my Internet is not working? I think about it a lot and still don't know what is correct answerer nor what answer my future employer expects. My choice would be something like: What part of Internet? (but more polite). For example I could ask for opening web page that works on my PC. Please give only serious answers. If You want BOFH or "The website is down" style answers I can create separate question for that.

    Read the article

  • What is the best answer for: "my Internet is not working"?

    - by Maciek Sawicki
    Hi, I look for work in IT Support. One of interview questions is: what would you first say if user call You and tell my Internet is not working? I think about it a lot and still don't know what is correct answerer nor what answer my future employer expects. My choice would be something like: What part of Internet? (but more polite). For example I could ask for opening web page that works on my PC. Please give only serious answers. If You want BOFH or "The website is down" style answers I can create separate question for that.

    Read the article

  • A good Linux alternative to Ubuntu for a working environment.

    - by Roozak
    Hi, Im running a decent laptop with 3GB ram and 2GHz Core Duo. I use it mainly for working which requires several SSH and SFTP connections to servers and running a VM most of the time. Nothing much more intensive than that. I like using Ubuntu 9.10 however I have the issue of Nautilus and the top/bottom menus freezing up on me constantly - dare I say it, alot more problems than when I was using Windows Vista. Im just looking for recommendations of other operating systems which would be suitable for the task. Thanks

    Read the article

  • How do i find out what's preventing delete requests from working in iis7.5 and iis8?

    - by Simon
    Our site has an MVC Rest API. Recently, both the live servers and my development machine stopped accepting DELETE requests, instead returning a 501 Not Implemented response. On my development machine, which is Windows 7 running IIS7.5, the solution was to add these lines to our Web.config, under system.webServer / handlers: <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> ... <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE" type="System.Web.Handlers.TransferRequestHandler" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" /> However, this didn't work on any of our live servers; not on Sever 2008 + IIS7.5 and not on Server 2012 + IIS8. There are no verbs set up in Request Filtering, and WebDAV is not installed on any of our live servers. The error page gives no further information, and nothing gets recorded in the logs. How do I find out what's preventing DELETE requests from working in iis7.5 and iis8?

    Read the article

  • WSUS works, but checkhealth logs events 13042 12002 12012 12032 12022 12042 12052

    - by jobu1324
    Our WSUS server stopped working until the patch related to .NET 4.0 was installed, at which point clients started downloading and updating again. However, the WSUS mmc console occasionally disconnects when performing various tasks, such as running automatic approval rules; also wsusutil checkhealth creates the following events: 13042: Self-update is not working. 12002: The Reporting Web Service is not working. 12012: The API Remoting Web Service is not working. 12032: The Server Synchronization Web Service is not working. 12022: The Client Web Service is not working. 12042: The SimpleAuth Web Service is not working. 12052: The DSS Authentication Web Service is not working. Apparently there are many possible causes for these events. I'm looking for a way to figure out what is wrong, so that I can fix it.

    Read the article

  • Does a Samsung G3 Station external hard drive stop working when power supply is too high?

    - by Cacovsky
    I have a Samsung G3 Station 2TB external hard drive (link to PDF specs here). It was working perfectly when I accidentally plugged it in my notebook's power source. The notebook's power source is 19V/3.42A. The hard drive's is 12V/2A and I know that, inside its case, there is regular 2TB SATA drive, along with some sort of adapter. Does this adapter has some kind of power protection? I opened the case and the hard drive board smells bad. Does my data is forever lost or can I replace its board?

    Read the article

  • How to get Atheros ar242x wireless adapter working under Debian Linux?

    - by Mark
    Does anybody know how to get the Atheros ar242x wireless adapter working under Debian Linux (5.0.2 and/or 5.0.3)? My Debian live CDs and install CDs both don't like this card at all. Curisouly, it seems to work on other, Debian-based, Linuxes. Is this a free/non-free Driver issue? I know Debian gets mardy about that. Although for what it's worth, the Live CD doesn't seem to detect my wired LAN connection either... Specifically this is on a Samsung R610 laptop (some version of which seem to have an intel wireless adapter - this one definitely doesn't!) I've tried all sorts of things but obviously on a live CD installing software is limited. I've also tinkerering with network config files and kernel modules etc but to no avail.

    Read the article

  • Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

    - by Carl
    I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

    Read the article

  • Is HDCP working for ATI/AMD cards on windows 8?

    - by Joel Barsotti
    I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

    Read the article

  • Why did my mouse/trackpad suddenly stop working on my MacBook under Windows XP?

    - by Jack B Nimble
    My mouse and track pad have suddenly stopped working on my MacBook, which is running Windows XP from BootCamp. Both the USB mouse and the trackpad work fine in OS X. The device manager says that the driver is missing or corrupt on both items (they have a yellow exclamation point). I tried uninstalling the mice, and reinstalling them. Since the USB mouse is a Logitech I tried replacing the driver with one downloaded from Logitech.com. Anyone know how I can repair the mouse driver that Windows XP is using?

    Read the article

  • XenServer 5.6.1-fp1. Can't get network working

    - by casey_miller
    I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

    Read the article

  • How do I tell if a Python pip install is working correctly or hanging?

    - by wobbily_col
    I am trying to install the python pandas package in a virtualenv using pip. On my development machine it installed correctly, but now I am trying on the server, it gets so far then it seems to get stuck: warnings.warn(LapackSrcNotFoundError.__doc__) /apps/PYTHON/2.7.3/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'define_macros' warnings.warn(msg) non-existing path in 'numpy/distutils': 'site.cfg' non-existing path in 'numpy/lib': 'benchmarks' Could not locate executable gfortran Could not locate executable f95 Found executable /apps/modules/wrappers/fortran/ifort Top shows ifort running at 46% cpu. Is there any way I can tell if this is working correctly (can I check files it is updating for example), or if it is stuck in a loop? It has been running for 40 minutes so far.

    Read the article

  • Mouse/Touchpad not working in Mac OS X Lion Pre-Boot Authentication (PBA) with File Vault 2

    - by Chris
    I set up File Vault 2 in Mac OS X Lion with Pre-Boot Authentication (PBA). In PBA-login my USB-keyboard is working, while using a wrong keyboard layout. I can neither use my magic touchpad nor an USB-mouse in PBA. Thus I can't change the keyboard layout located in the upper right corner. I tried unplugging all USB-devices except keyboard and mouse. Nothing seems to help and the mouse cursor isn't moving. How can I get magic trackpad or USB-mouse to work in PBA login screen or manually set the used keyboard layout in PBA? Update: Still no (USB-)mouse or bluetooth trackpad support in File Vault 2 Login Screen. Today I talked to Apple Support for over one hour with no result. Every idea is appreciated.

    Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >