Search Results

Search found 10313 results on 413 pages for 'hardware sharing'.

Page 198/413 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Apple Magic Mouse on Windows XP SP3

  - by index

  Using generic Windows bluetooth drivers + Apple Wireless Mouse drivers as Bluetooth HID service. The mouse is connected. It just does not do anything. It does not show up under mice in hardware manager, just as Bluetooth HID. Not using the Apple drivers does not work either. I'm using a logilink BT0007

  Read the article

• Stack-based keyboard delay using Logitech MX3100 keyboard

  - by Mark S. Rasmussen

  I've been using a Logitech Cordless Desktop MX3100 keyboard for quite a while. I've never really had any problems, except for the occasional typo. I noticed however that I tended make the typo "Laod" instead of "Load", quite a bit more often than any other typos. As it started to get on my nerves, I decided to do some testing. What I found out was than when I write lowercase "load", I'd never make the typo. All uppercase, or just uppercase L, I'd make the typo quite often. My actual (very scientific) testing is probably best described by showing the output: moatmoatmoat MoatMoatMoat loatloatloat LaotLaotLaot loafloafloaf LaofLaofLaof hoathoathoat HoatHoatHoat hoadhoadhoad HoadHoadHoad lortlortlort LrotLrotLrot What i found out was that whenever shift was depressed, typing an uppercase "L" would induce a significant lag if the next character was an "o", compared to the lag of the any other key: High "o" lag: LoLoLoLoLoLo No "a" lag: LaLaLaLaLaLa No lag for neither "o" nor "a": lolololololo lalalalalala By realizing this I regained a slight bit of sanity as I knew I wasn't coming down with a case of Parkinsons. I was actually typing correctly, the lag just interpreted it wrongly. Now, what really bugs me is that I can't fathom how this is occurring. What I'm actually typing, in physical order, is this: L - o - a - d, and yet, the "a" is output before the "o", even though "o" was pressed before "a". So while the keyboard is processing the "Lo" combo, the "a" gets prioritized and is inserted before the "o" is done processing, resulting in Laod instead of Load. And this only happens when typing "Lo", not when typing lowercase "lo". This problem could stem from the keyboard hardware, the receiver hardware or the keyboard software driver. No matter the fault location however, I can't imagine how this could be implemented as anything but a FIFO queue. A general delay, sure, I could live with that, albeit I'd be irritated. But a lag affecting different keys differently, and even resulting in unpredictable outcome - that just doesn't make any sense. I've solved the problem by just switching to a wired keyboard. I just can't shake it off me though; what kind of bug/error/scenario would result in a case like this? Edit: It's been suggested that I stop drinking Red Bull and stick to water instead. While that may actually help solve the issue, I'm really not looking for a solution as such. I'm more interested in an explanation of how this could happen, as I can't imagine any viable technical solution that could result in this behavior.

  Read the article

• Network MP600 printer asking me to install new driver on laptop.

  - by user15003

  I have windows 7 home 32-bit on my desktop which is connected to my mp600 via USB. I have Vista 64-bit on my laptop. The MP600 is set for sharing and appears under printers in network under my pc's name. When I click on connect it says "The server for canon inkjet mp600 printer does not have the correct printer drivers installed........." I don't know what to do and it is really frustrating. It all worked fine before when I had XP 32 bit on my desktop

  Read the article

• Creating virtual switch in VMware

  - by MJI

  We are trying to add a network using vsphere client for VMkernel port while creating a virtual switch. But it prompts us a red cross between the physical adapter and VMkernel port. We did test all the network cables and the network adapters. We tried creating virtual switch for service console but no gains. We have used NIC's which are VMware certified. I have even tried to update bios to check the hardware compatibility but didn't work.

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Any rerefence of CPU world statistics?

  - by Áxel Costas Pena

  I am looking for any referencee about computer power statistics across the world. My main interest is about real computing capabilities, so I'd prefer information about real processor power, and even best if it includes also other critical hardware statistics, like RAM memory, but if it isn't possible, maybe statistics about brand/model distribution will be also useful. I've Googled for some minutes and I've found nothing related.

  Read the article

• CentOS 5.7 keeps rebooting after fresh installation

  - by Wagner Maestrelli

  I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

  Read the article

• Accessing A Shared Directory That Has An Account White List

  - by Xan

  I'm on a LAN here at work and I have my desktop sharing some of my project folders. I can access the computer via \\ComputerIP\, but I can't actually open any of the folders. Upon attempting, I get the error: Windowns cannot access \ComputerIP\ProjectFolder You do not have permission to access \ComputerIP\ProjectFolder. Contact your network administrator to request access. For more information about permissions, see Windows Help and Support Now, this is understood considering I've made it so that you had to utilize the "Project" credentials to connect. I have a user account on my main computer hosting these shared folders that gives full access to the folders if you are this "Project" user. I can Remote Desktop the computer just fine from my laptop using either set of credentials. When I try to open these folders it doesn't give me the option to attempt to apply any credentials like it does when I remote desktop. How am I supposed to gain access to these folders?

  Read the article

• x64 Windows 7 won't recognize my Sony DV cam DCR-TRV330 through Firewire

  - by Korrupzion

  Hi, I'm having issues using my Sony DV cam DCR-330 and windows 7 ultimate 64bit. I connect the DV Cam as I do it in another pcs (works flawless in windows windows xp 32 bit and another notebook with the same specs than mine but using windows vista x86) but windows doesn't get any "New hardware" in device manager Is anyone having the same issue than I?

  Read the article

• How to upload stuff to Amazon EC2 Windows instance?

  - by JohnIdol

  I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works, in terms of transferring data to my ec2 instances. So the question is how can I upload stuff to my instance? Any help appreciated!

  Read the article

• network endpoint accessible via hostname only, not address?

  - by Dustin Getz

  someone told me that this piece of network hardware (NAS) has a security setting such that it can only be accessed by hostname, not by IP address. I don't understand, as I thought DNS resolved the hostname to an address on the connecting client's side, then at protocol level always used the raw address, so how can this 'security' measure be possible?

  Read the article

• Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

  - by K Vaughan

  I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Mysterious login attempts to windows server

  - by Jim Balo

  I have a Windows 2008R2 server that is reporting failed login attempts from a number of workstations on our network. Some event log details: Event ID 4625, Status: 0xc000006d, Sub Status: 0xc0000064 Security ID: NULL SID, Account Name: joedoe, Account Domain: Acme Workstation Name: WINXP1, Source Network Address: 192.168.1.23, Source Port: 1904 Logon Process: NtLmSsp, Authentication Package: NTLM, Logon Type: 3 (network) I believe this is coming from some netbios service or similar (maybe the file explorer), keeping an inventory of its network neighborhood and also trying to authenticate. Is there a way to turn this off without having to turn off file sharing all together? In other words, clients authenticating against file servers that they use is of course no problem, but I want to eliminate clients trying to authenticate to servers that they are not using and have no business with. The above example is only one of thousands of log alerts for similar failed network authentications. What can I do to clean this up / handle this? Thanks.

  Read the article

• Is using Windows Update to find Drivers for laptop good enough?

  - by user22105

  I'm trying to install drivers for my laptop after fresh install of Windows 8. From the manufacturer's website, there are many drivers and utilities available. But after running Windows Update(which finds drivers for the hardware on my laptop), I only had to install a few (the ones with Unidentified Device) I'm wondering if this is good enough? or would I skip some important drivers like Chipset Thermo management etc etc that could potentially cause harm to my laptop?

  Read the article

• How to route HyperV VMs traffic through host VPN

  - by Random

  I'm using Windows 8.1 Pro with HyperV. I have several VMs for development, all of them connected with host via Internal adapter using network addresses: 192.168.10.0/24 Where: 192.168.10.1 is my host's Hyper-V internal NIC address. When I'm not in my office I use 3G usb dongle an dialup VPN connection. I would like to route traffic from all existing and future VMs through the VPN. In best scenario traffic would be routed only partially to the local company network addresses 10.1.1.0/24 I don't want to use sharing because I'm switching between WiFi, USB 3G dongle and VPN. Moving to other virtualization is also not an option for me.

  Read the article

• Canon LIDE 30 scanner with Windows 7 x64

  - by marc_s

  Has anyone gotten any of those older LIDE scanners (models 20, 30, 35 etc.) to work on Win7 x64?? I've tried several things, like grabbing the LIDE 60 driver for Vista64, but nothing has worked so far.... Any ideas? Doesn't look like Canon wants to support its "more-than-six-months-old" own hardware.... disappointing, really.

  Read the article

• Apache apachectl/httpd hangs

  - by VANJ

  Oracle HTTP Server (OHS), RHEL 5.3, Dell hardware Oracle has a modified version of Apache2 for use with web-enabled components in its product suite. The apachectl start command just hangs, even configtest hangs! Not sure what it is waiting for. How does one go about troubleshooting this? Thanks

  Read the article

• VirtualBox - split partitioned VDI into separate VDIs

  - by mathematical.coffee

  I'm very new to VirtualBox. I set up an Arch Linux VM and a Ubuntu VM (Ubuntu host), both sharing the same .vdi like so (I had in my mind a dual-boot situation): VDI file (25GB) |- /dev/sda1: 5GB (Arch Linux) |- /dev/sda2: [Ubuntu] |- /dev/sda5 (swap, 1GB) |- /dev/sda6 Ubuntu /, 9GB |- /dev/sda7 Ubuntu /home, 10GB I've now realised that I don't want a dual-boot-type setup, I'd rather boot each machine independently (my initial thought was to share /home between Ubunto and Arch). So, my question: Can I split /dev/sda1 and /dev/sda2 each to their own .vdi files so I can use them as completely separate machines? I'd rather not have to re-install either Arch (because it took me ages to work it out!) or Ubuntu (because I've already done a few GB of updates and don't want to redo them). I haven't been able to find anything about this - most questions I see are about converting a .vdi to a partition on the host, or splitting a .vdi into multiple smaller files (that are not independent), or converting a partition on the host to a .vdi file. cheers.

  Read the article

• net share not working as expected ?

  - by Riduidel

  Hi, I'm creating a SMB share on a windows machine using the net share command. I write net share MyCompany_server___0.0.1-SNAPSHOT___server=E:\JavaWorkspace\Product\src\generated\server Then, this share is visible by other Windows machine in network shares of my machine, but not be accessed. Is there an option I forgot to set ? EDITED due to comment Accessing the share using an OpenSUSE machine brings the "The folder contents could not be displayed." message. Accessing the share using the Windows machine sharing that folder succeeds without any issue Accessing the share using another Windows machine displays MyCompany_server_0.0.1-SNAPSHOT_server is not accessible. Access refused

  Read the article

• Ubuntu with Netatalk and Samba TimeMachine can't connect

  - by Philip

  I installed netatalk on my Ubuntu Server a few weeks ago and configured it so that I could use Timemachine from my mac to backup on a server instead of a external hard drive. It worked really good until yesterday when I installed Samba to be able to share certain folders on my server to my mac. Now I receive an error msg: There are no shares available or you are not allowed to access them on the server. Please contact your system administrator to resolve the problem. From what I understand is that the problem is on the server and not on my mac. I have tried to restart the computer and without adding any of the folders Samba is sharing adding the timemachine "afp://...@...". Is there a problem running them both at the same time, do I need to configure samba so that it doesn't reject afp? I'm pretty new at this...

  Read the article

• Port Lacie Big Disk (raid0) to server

  - by Frankie

  Does anyone know if it is possible (and linear) to port a LaCie Big Disk (hardware based array 0) to a linux server? Can I just install the HD's on the server and then mdadm it? Thank you!

  Read the article

• Reverse proxy setup for distributed storage

  - by vise

  I have 4 file servers that I want to access under a single mount point from another server. This server has a web application that should serve content from the mounted point. I think I can achieve this with glusterfs. Considering that the file servers have fairly powerful hardware, I want to install a webserver on each of them and serve those files via a reverse proxy. Any thoughts on how I may be able to do so?

  Read the article

• Should I consolidate multiple identical VMs into BSD jails?

  - by Josh

  We run a number of Openfire XMPP/Jabber servers. Due to the way Openfire works, we cannot easily run multiple Openfire instances on one server, so I have 5 identical VMware ESXi VMs, each with CentOS, MySQl, Java, and Openfire. They're the exact same, except for their IP addresses, the actual Openfire MySQL database and it's config file. I am wondering if this is the optimal configuration, or if it would be better to move these VMs to a single FreeBSD machine and put each one inside a FreeBSD jail. Specifically, I am wondering if the benefit of VMWare's Transparent Page Sharing (TPS) would outweight the cost of running 5 identical OSes. Would I end up using less memory with one large FreeBSD machine and java running in bsd jails?

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >