Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 199/789 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• Swap and hibernation

  - by maaartinus

  I saw a lot of recommendations claiming that for hibernation the swap partition/file must be at least as large as the main memory. This makes no sense to me. Lets assume I have 8 GB of main memory and 8 GB swap area and want to hibernate: case 1: I'm using 4 GB of virtual memory - 8 GB of swap is unnecessarily large. case 2: I'm using 8 GB of virtual memory - 8 GB of swap is just right. case 3: I'm using 12 GB of virtual memory - 8 GB of swap is too small. The outcome is: A swap area of size equal to the memory size is sufficient for hibernate IFF it doesn't get used for swapping at all. So what is the reason behind the claim that you need at least as much swap area as main memory for hibernate to work? I know that virtual memory gets used for caching too, and that the cache may be simply discarded, but what happens to hibernation if a program allocates 12 GB of virtual memory (given the above memory and swap sizes)?

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by user42055

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ?

  Read the article

• ERROR CHECKING !!

  - by moata_u

  am trying catch any error when run command in order to write an log file / report i was trying write this code : FUNCTION FOR VALIDATION function valid (){ if [ $? -eq 0 ]; then echo "$var1" ": status : OK" else echo "$var1" ": status : ERROR" fi COMMAND FUNCTION function save(){ sed -i "/:@/c connection.url=jdbc:oracle:thin:@$ip:1521:$dataBase" $search var1="adding database ip" valid $var1 sed -i "/connection.username/c connection.username=$name" #$search retval=$? var1="addning database SID" valid $var1 $retval } save OUTPUT adding database ip : status : OK sed: no input file i want out put in this way: adding database ip : status : OK sed: no input file : status : ERROR" (OR) adding database ip : status : OK addning database SID : status : ERROR" I was tried toooo much but not working with me :(((

  Read the article

• Sysprep a BizTalk Server VHD

  - by AbhishekLohani

  Hi All,   Sysprep creates a snapshot of a virtual machine with BizTalk Server 2010 installed for quick deployment on other virtual machines   Prerequisites Before using Sysprep, you should have some knowledge of using virtual machines with Hyper-V. You should also have a virtual machine with a clean, typical installation of BizTalk Server and all of its prerequisites. Sysprep will run on Windows Server 2008 and Windows Vista with SP1. Description Sysprep creates a VHD of a BizTalk Server 2010 installation (including the operating system and all prerequisites) for quick deployment on other virtual machines. An image created using Sysprep will choose a new computer name in order to join the domain the first time it starts. To get BizTalk Server running properly, it is necessary to update various instances of the computer name that are stored in the registry and databases. Please refer the Microsoft Links for Details :http://technet.microsoft.com/en-us/library/ee358636.aspx   Thanks Abhishek

  Read the article

• Nameserver Problem

  - by CrazyCodeZ

  I recently bought a new VPS , and i was trying to set private nameservers in my domain cpanel. I went ahead and added 4 A records ns1.mydomain.com - points to my ip ns2.mydomain.com - points to my ip www.mydomain.com - points to my ip mydomain.com - points to my ip and changed the nameservers to ns1 & ns2.mydomain.com the problem is that now while typing www.ns1.mydomain.com and www.ns2.mydomain.com in browser it points to the correct IP address but the www.mydomain.com is saying an Error The webpage at http://demiracles.com/ might be temporarily down or it may have moved permanently to a new web address. Error 137 (net::ERR_NAME_RESOLUTION_FAILED): Unknown error. Error message in chrome is above. Please help me.

  Read the article

• How to get nicer error-messages in this bash-script?

  - by moata_u

  I'm trying to catch any error when run a command in order to write a log-file / report I've tried this code: function valid (){ if [ $? -eq 0 ]; then echo "$var1" ": status : OK" else echo "$var1" ": status : ERROR" fi } function save(){ sed -i "/:@/c connection.url=jdbc:oracle:thin:@$ip:1521:$dataBase" $search var1="adding database ip" valid $var1 sed -i "/connection.username/c connection.username=$name" #$search var1="addning database SID" valid $var1 } save The output looks like this: adding database ip : status : OK sed: no input file But I want it to look like this: adding database ip : status : OK sed: no input file : status : ERROR" or this: adding database ip : status : OK addning database SID : status : ERROR" I've been trying, but it's not working with me. :(

  Read the article

• HP to Cisco spanning tree root flapping

  - by Tim Brigham

  Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

  Read the article

• Mail server not sending or receiving after removal from barracuda blacklist to white list

  - by user137765

  Mail server not sending or receiving after removal from barracuda blacklist to white list. I've checked against black lists and the ip and domain are clean. 1and1 are saying its Barracuda black list and barracuda are saying its not blacklisted and that its somethign with 1and1 server. section from log file... Sep 20 04:29:25 vegaserve postfix/smtpd[16906]: connect from mta860.chtah.net[63.236.31.146] Sep 20 04:29:25 vegaserve postfix/smtpd[16070]: connect from host81-136-144-117.in-addr.btopenworld.com[81.136.144.117] Sep 20 04:29:27 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: raidon - short names not allowed from @ [201.80.253.153]ERR: 1348111767.185119 LOGOUT, [email protected], ip=[86.143.136.249], top=0, retr=0, time=151, rcvd=18, sent=283, maildir=/var/qmail/mailnames/mbelectrics.net/mb/Maildir Sep 20 04:29:28 vegaserve pop3d: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:28 vegaserve postfix/smtpd[15388]: connect from mta965.emails.itv.com[8.30.201.55] Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:29 vegaserve postfix/cleanup[24879]: 95CB31E87556C: message-id=<[email protected] Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: from=, size=975, nrcpt=1 (queue active) Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: disconnect from uspmta172097.emarsys.net[195.54.172.97] Sep 20 04:29:29 vegaserve postfix/smtp[25748]: 95CB31E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:29 vegaserve postfix/bounce[25897]: warning: 95CB31E87556C: undeliverable postmaster notification discarded Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: removed Sep 20 04:29:32 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:37 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rei - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve postfix/smtpd[19328]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[18331]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/cleanup[24825]: BD1A71E87556C: message-id=<[email protected] Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: from=, size=673, nrcpt=1 (queue active) Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: disconnect from unknown[118.97.212.190] Sep 20 04:29:40 vegaserve postfix/smtp[25748]: BD1A71E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:40 vegaserve postfix/bounce[25995]: warning: BD1A71E87556C: undeliverable postmaster notification discarded Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: removed Sep 20 04:29:41 vegaserve postfix/cleanup[24879]: 0A42B1E87556C: message-id=<[email protected] Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: from=, size=961, nrcpt=1 (queue active) Sep 20 04:29:41 vegaserve postfix/smtpd[18331]: disconnect from bay0-omc4-s10.bay0.hotmail.com[65.54.190.212] Sep 20 04:29:41 vegaserve postfix/smtp[25748]: 0A42B1E87556C: to=, orig_to=, relay=none, delay=0.03, delays=0.03/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:41 vegaserve postfix/bounce[25897]: warning: 0A42B1E87556C: undeliverable postmaster notification discarded Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: removed Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:43 vegaserve postfix/cleanup[24825]: 8F8991E87556C: message-id=<[email protected] Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: from=, size=946, nrcpt=1 (queue active) Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: disconnect from blu0-omc4-s22.blu0.hotmail.com[65.55.111.161] Sep 20 04:29:43 vegaserve postfix/smtp[25748]: 8F8991E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.02/0/0.02/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:43 vegaserve postfix/bounce[25995]: warning: 8F8991E87556C: undeliverable postmaster notification discarded Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: removed Sep 20 04:29:44 vegaserve postfix/cleanup[24879]: 088641E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: from=, size=1078, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[19328]: disconnect from smtp10.bis7.eu.blackberry.com[178.239.85.15] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 088641E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.03/0/0.01/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25995]: warning: 088641E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: removed Sep 20 04:29:44 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rin - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:44 vegaserve postfix/cleanup[24825]: 946F51E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: from=, size=1173, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: disconnect from hubrelay-rd.bt.com[62.239.224.99] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 946F51E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25897]: warning: 946F51E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: removed Sep 20 04:29:45 vegaserve postfix/smtpd[14816]: connect from col0-omc2-s12.col0.hotmail.com[65.55.34.86] Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:47 vegaserve postfix/cleanup[24879]: 961721E87556C: message-id=<[email protected] Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: from=, size=1082, nrcpt=1 (queue active) Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: disconnect from mta-35d2.livingsocial.com[199.91.53.210] Sep 20 04:29:47 vegaserve postfix/smtp[25748]: 961721E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:47 vegaserve postfix/bounce[25995]: warning: 961721E87556C: undeliverable postmaster notification discarded Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: removed Sep 20 04:29:50 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rini - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:50 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:52 vegaserve postfix/smtpd[24478]: connect from col0-omc2-s13.col0.hotmail.com[65.55.34.87] Sep 20 04:29:52 vegaserve postfix/smtpd[18923]: connect from www.idbwplan.com[193.181.254.21] Sep 20 04:29:55 vegaserve postfix/smtpd[15968]: connect from 105-48.mta.dotmailer.com[94.143.105.48] Sep 20 04:29:56 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ringo - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:56 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:00 vegaserve postfix/smtpd[18772]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:01 vegaserve postfix/cleanup[24825]: 1DAD71E87556C: message-id=<[email protected] Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: from=, size=1022, nrcpt=1 (queue active) Sep 20 04:30:01 vegaserve postfix/smtpd[18772]: disconnect from mail95.us2.mcsv.net[173.231.139.95] Sep 20 04:30:01 vegaserve postfix/smtp[25748]: 1DAD71E87556C: to=, orig_to=, relay=none, delay=0.06, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:30:01 vegaserve postfix/bounce[25897]: warning: 1DAD71E87556C: undeliverable postmaster notification discarded Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: removed Sep 20 04:30:02 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ritsuko - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:02 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/cleanup[24879]: 8AADD1E87556C: message-id=<[email protected] Sep 20 04:30:02 vegaserve postfix/qmgr[14378]: 8AADD1E87556C: from=, size=1003, nrcpt=1 (queue active) Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: disconnect from mr133.createsend.com[184.106.86.133] Sep 20 04:30:02 vegaserve postfix/smtp[25748]: 8AADD1E87556C: to=, orig_to=, relay=none, delay=0.02, delays=0.02/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself)

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• Is there a Hyper-V virtual machine client for XP? Linux? Mac?

  - by mattlandis

  Is there a Hyper-V virtual machine client for XP? Linux? Mac? I'm aware that we could VNC or RDP into the virtual machine but the problem is if the VM is not running or is suspend the end user can't start it and IT needs to get involved. I guess what I'm looking for is something like VMconnect.exe that runs on xp or linux. Or, If I am totally barking up the wrong tree let me know. ;-)

  Read the article

• Diving into OpenStack Network Architecture - Part 2 - Basic Use Cases

  - by Ronen Kofman

    rkofman Normal rkofman 4 138 2014-06-05T03:38:00Z 2014-06-05T05:04:00Z 3 2735 15596 Oracle Corporation 129 36 18295 12.00 Clean Clean false false false false EN-US X-NONE HE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} In the previous post we reviewed several network components including Open vSwitch, Network Namespaces, Linux Bridges and veth pairs. In this post we will take three simple use cases and see how those basic components come together to create a complete SDN solution in OpenStack. With those three use cases we will review almost the entire network setup and see how all the pieces work together. The use cases we will use are: 1.       Create network – what happens when we create network and how can we create multiple isolated networks 2.       Launch a VM – once we have networks we can launch VMs and connect them to networks. 3.       DHCP request from a VM – OpenStack can automatically assign IP addresses to VMs. This is done through local DHCP service controlled by OpenStack Neutron. We will see how this service runs and how does a DHCP request and response look like. In this post we will show connectivity, we will see how packets get from point A to point B. We first focus on how a configured deployment looks like and only later we will discuss how and when the configuration is created. Personally I found it very valuable to see the actual interfaces and how they connect to each other through examples and hands on experiments. After the end game is clear and we know how the connectivity works, in a later post, we will take a step back and explain how Neutron configures the components to be able to provide such connectivity.  We are going to get pretty technical shortly and I recommend trying these examples on your own deployment or using the Oracle OpenStack Tech Preview. Understanding these three use cases thoroughly and how to look at them will be very helpful when trying to debug a deployment in case something does not work. Use case #1: Create Network Create network is a simple operation it can be performed from the GUI or command line. When we create a network in OpenStack the network is only available to the tenant who created it or it could be defined as “shared” and then it can be used by all tenants. A network can have multiple subnets but for this demonstration purpose and for simplicity we will assume that each network has exactly one subnet. Creating a network from the command line will look like this: # neutron net-create net1 Created a new network: +---------------------------+--------------------------------------+ | Field                     | Value                                | +---------------------------+--------------------------------------+ | admin_state_up            | True                                 | | id                        | 5f833617-6179-4797-b7c0-7d420d84040c | | name                      | net1                                 | | provider:network_type     | vlan                                 | | provider:physical_network | default                              | | provider:segmentation_id  | 1000                                 | | shared                    | False                                | | status                    | ACTIVE                               | | subnets                   |                                      | | tenant_id                 | 9796e5145ee546508939cd49ad59d51f     | +---------------------------+--------------------------------------+ Creating a subnet for this network will look like this: # neutron subnet-create net1 10.10.10.0/24 Created a new subnet: +------------------+------------------------------------------------+ | Field            | Value                                          | +------------------+------------------------------------------------+ | allocation_pools | {"start": "10.10.10.2", "end": "10.10.10.254"} | | cidr             | 10.10.10.0/24                                  | | dns_nameservers  |                                                | | enable_dhcp      | True                                           | | gateway_ip       | 10.10.10.1                                     | | host_routes      |                                                | | id               | 2d7a0a58-0674-439a-ad23-d6471aaae9bc           | | ip_version       | 4                                              | | name             |                                                | | network_id       | 5f833617-6179-4797-b7c0-7d420d84040c           | | tenant_id        | 9796e5145ee546508939cd49ad59d51f               | +------------------+------------------------------------------------+ We now have a network and a subnet, on the network topology view this looks like this: Now let’s dive in and see what happened under the hood. Looking at the control node we will discover that a new namespace was created: # ip netns list qdhcp-5f833617-6179-4797-b7c0-7d420d84040c   The name of the namespace is qdhcp-<network id> (see above), let’s look into the namespace and see what’s in it: # ip netns exec qdhcp-5f833617-6179-4797-b7c0-7d420d84040c ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00     inet 127.0.0.1/8 scope host lo     inet6 ::1/128 scope host        valid_lft forever preferred_lft forever 12: tap26c9b807-7c: <BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN     link/ether fa:16:3e:1d:5c:81 brd ff:ff:ff:ff:ff:ff     inet 10.10.10.3/24 brd 10.10.10.255 scope global tap26c9b807-7c     inet6 fe80::f816:3eff:fe1d:5c81/64 scope link        valid_lft forever preferred_lft forever   We see two interfaces in the namespace, one is the loopback and the other one is an interface called “tap26c9b807-7c”. This interface has the IP address of 10.10.10.3 and it will also serve dhcp requests in a way we will see later. Let’s trace the connectivity of the “tap26c9b807-7c” interface from the namespace.  First stop is OVS, we see that the interface connects to bridge  “br-int” on OVS: # ovs-vsctl show 8a069c7c-ea05-4375-93e2-b9fc9e4b3ca1     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2"                 type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"     Bridge br-ex         Port br-ex             Interface br-ex                 type: internal     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port "tap26c9b807-7c"             tag: 1             Interface "tap26c9b807-7c"                 type: internal         Port br-int             Interface br-int                 type: internal     ovs_version: "1.11.0"   In the picture above we have a veth pair which has two ends called “int-br-eth2” and "phy-br-eth2", this veth pair is used to connect two bridge in OVS "br-eth2" and "br-int". In the previous post we explained how to check the veth connectivity using the ethtool command. It shows that the two are indeed a pair: # ethtool -S int-br-eth2 NIC statistics:      peer_ifindex: 10 . .   #ip link . . 10: phy-br-eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 . . Note that “phy-br-eth2” is connected to a bridge called "br-eth2" and one of this bridge's interfaces is the physical link eth2. This means that the network which we have just created has created a namespace which is connected to the physical interface eth2. eth2 is the “VM network” the physical interface where all the virtual machines connect to where all the VMs are connected. About network isolation: OpenStack supports creation of multiple isolated networks and can use several mechanisms to isolate the networks from one another. The isolation mechanism can be VLANs, VxLANs or GRE tunnels, this is configured as part of the initial setup in our deployment we use VLANs. When using VLAN tagging as an isolation mechanism a VLAN tag is allocated by Neutron from a pre-defined VLAN tags pool and assigned to the newly created network. By provisioning VLAN tags to the networks Neutron allows creation of multiple isolated networks on the same physical link.  The big difference between this and other platforms is that the user does not have to deal with allocating and managing VLANs to networks. The VLAN allocation and provisioning is handled by Neutron which keeps track of the VLAN tags, and responsible for allocating and reclaiming VLAN tags. In the example above net1 has the VLAN tag 1000, this means that whenever a VM is created and connected to this network the packets from that VM will have to be tagged with VLAN tag 1000 to go on this particular network. This is true for namespace as well, if we would like to connect a namespace to a particular network we have to make sure that the packets to and from the namespace are correctly tagged when they reach the VM network. In the example above we see that the namespace interface “tap26c9b807-7c” has vlan tag 1 assigned to it, if we examine OVS we see that it has flows which modify VLAN tag 1 to VLAN tag 1000 when a packet goes to the VM network on eth2 and vice versa. We can see this using the dump-flows command on OVS for packets going to the VM network we see the modification done on br-eth2: #  ovs-ofctl dump-flows br-eth2 NXST_FLOW reply (xid=0x4):  cookie=0x0, duration=18669.401s, table=0, n_packets=857, n_bytes=163350, idle_age=25, priority=4,in_port=2,dl_vlan=1 actions=mod_vlan_vid:1000,NORMAL  cookie=0x0, duration=165108.226s, table=0, n_packets=14, n_bytes=1000, idle_age=5343, hard_age=65534, priority=2,in_port=2 actions=drop  cookie=0x0, duration=165109.813s, table=0, n_packets=1671, n_bytes=213304, idle_age=25, hard_age=65534, priority=1 actions=NORMAL   For packets coming from the interface to the namespace we see the following modification: #  ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4):  cookie=0x0, duration=18690.876s, table=0, n_packets=1610, n_bytes=210752, idle_age=1, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL  cookie=0x0, duration=165130.01s, table=0, n_packets=75, n_bytes=3686, idle_age=4212, hard_age=65534, priority=2,in_port=1 actions=drop  cookie=0x0, duration=165131.96s, table=0, n_packets=863, n_bytes=160727, idle_age=1, hard_age=65534, priority=1 actions=NORMAL   To summarize we can see that when a user creates a network Neutron creates a namespace and this namespace is connected through OVS to the “VM network”. OVS also takes care of tagging the packets from the namespace to the VM network with the correct VLAN tag and knows to modify the VLAN for packets coming from VM network to the namespace. Now let’s see what happens when a VM is launched and how it is connected to the “VM network”. Use case #2: Launch a VM Launching a VM can be done from Horizon or from the command line this is how we do it from Horizon: Attach the network: And Launch Once the virtual machine is up and running we can see the associated IP using the nova list command : # nova list +--------------------------------------+--------------+--------+------------+-------------+-----------------+ | ID                                   | Name         | Status | Task State | Power State | Networks        | +--------------------------------------+--------------+--------+------------+-------------+-----------------+ | 3707ac87-4f5d-4349-b7ed-3a673f55e5e1 | Oracle Linux | ACTIVE | None       | Running     | net1=10.10.10.2 | +--------------------------------------+--------------+--------+------------+-------------+-----------------+ The nova list command shows us that the VM is running and that the IP 10.10.10.2 is assigned to this VM. Let’s trace the connectivity from the VM to VM network on eth2 starting with the VM definition file. The configuration files of the VM including the virtual disk(s), in case of ephemeral storage, are stored on the compute node at/var/lib/nova/instances/<instance-id>/. Looking into the VM definition file ,libvirt.xml,  we see that the VM is connected to an interface called “tap53903a95-82” which is connected to a Linux bridge called “qbr53903a95-82”: <interface type="bridge">       <mac address="fa:16:3e:fe:c7:87"/>       <source bridge="qbr53903a95-82"/>       <target dev="tap53903a95-82"/>     </interface>   Looking at the bridge using the brctl show command we see this: # brctl show bridge name     bridge id               STP enabled     interfaces qbr53903a95-82          8000.7e7f3282b836       no              qvb53903a95-82                                                         tap53903a95-82    The bridge has two interfaces, one connected to the VM (“tap53903a95-82 “) and another one ( “qvb53903a95-82”) connected to “br-int” bridge on OVS: # ovs-vsctl show 83c42f80-77e9-46c8-8560-7697d76de51c     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2"                 type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"     Bridge br-int         Port br-int             Interface br-int                 type: internal         Port "int-br-eth2"             Interface "int-br-eth2"         Port "qvo53903a95-82"             tag: 3             Interface "qvo53903a95-82"     ovs_version: "1.11.0"   As we showed earlier “br-int” is connected to “br-eth2” on OVS using the veth pair int-br-eth2,phy-br-eth2 and br-eth2 is connected to the physical interface eth2. The whole flow end to end looks like this: VM è tap53903a95-82 (virtual interface)è qbr53903a95-82 (Linux bridge) è qvb53903a95-82 (interface connected from Linux bridge to OVS bridge br-int) è int-br-eth2 (veth one end) è phy-br-eth2 (veth the other end) è eth2 physical interface. The purpose of the Linux Bridge connecting to the VM is to allow security group enforcement with iptables. Security groups are enforced at the edge point which are the interface of the VM, since iptables nnot be applied to OVS bridges we use Linux bridge to apply them. In the future we hope to see this Linux Bridge going away rules.  VLAN tags: As we discussed in the first use case net1 is using VLAN tag 1000, looking at OVS above we see that qvo41f1ebcf-7c is tagged with VLAN tag 3. The modification from VLAN tag 3 to 1000 as we go to the physical network is done by OVS  as part of the packet flow of br-eth2 in the same way we showed before. To summarize, when a VM is launched it is connected to the VM network through a chain of elements as described here. During the packet from VM to the network and back the VLAN tag is modified. Use case #3: Serving a DHCP request coming from the virtual machine In the previous use cases we have shown that both the namespace called dhcp-<some id> and the VM end up connecting to the physical interface eth2  on their respective nodes, both will tag their packets with VLAN tag 1000.We saw that the namespace has an interface with IP of 10.10.10.3. Since the VM and the namespace are connected to each other and have interfaces on the same subnet they can ping each other, in this picture we see a ping from the VM which was assigned 10.10.10.2 to the namespace: The fact that they are connected and can ping each other can become very handy when something doesn’t work right and we need to isolate the problem. In such case knowing that we should be able to ping from the VM to the namespace and back can be used to trace the disconnect using tcpdump or other monitoring tools. To serve DHCP requests coming from VMs on the network Neutron uses a Linux tool called “dnsmasq”,this is a lightweight DNS and DHCP service you can read more about it here. If we look at the dnsmasq on the control node with the ps command we see this: dnsmasq --no-hosts --no-resolv --strict-order --bind-interfaces --interface=tap26c9b807-7c --except-interface=lo --pid-file=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/pid --dhcp-hostsfile=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/host --dhcp-optsfile=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/opts --leasefile-ro --dhcp-range=tag0,10.10.10.0,static,120s --dhcp-lease-max=256 --conf-file= --domain=openstacklocal The service connects to the tap interface in the namespace (“--interface=tap26c9b807-7c”), If we look at the hosts file we see this: # cat  /var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/host fa:16:3e:fe:c7:87,host-10-10-10-2.openstacklocal,10.10.10.2   If you look at the console output above you can see the MAC address fa:16:3e:fe:c7:87 which is the VM MAC. This MAC address is mapped to IP 10.10.10.2 and so when a DHCP request comes with this MAC dnsmasq will return the 10.10.10.2.If we look into the namespace at the time we initiate a DHCP request from the VM (this can be done by simply restarting the network service in the VM) we see the following: # ip netns exec qdhcp-5f833617-6179-4797-b7c0-7d420d84040c tcpdump -n 19:27:12.191280 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from fa:16:3e:fe:c7:87, length 310 19:27:12.191666 IP 10.10.10.3.bootps > 10.10.10.2.bootpc: BOOTP/DHCP, Reply, length 325   To summarize, the DHCP service is handled by dnsmasq which is configured by Neutron to listen to the interface in the DHCP namespace. Neutron also configures dnsmasq with the combination of MAC and IP so when a DHCP request comes along it will receive the assigned IP. Summary In this post we relied on the components described in the previous post and saw how network connectivity is achieved using three simple use cases. These use cases gave a good view of the entire network stack and helped understand how an end to end connection is being made between a VM on a compute node and the DHCP namespace on the control node. One conclusion we can draw from what we saw here is that if we launch a VM and it is able to perform a DHCP request and receive a correct IP then there is reason to believe that the network is working as expected. We saw that a packet has to travel through a long list of components before reaching its destination and if it has done so successfully this means that many components are functioning properly. In the next post we will look at some more sophisticated services Neutron supports and see how they work. We will see that while there are some more components involved for the most part the concepts are the same. @RonenKofman

  Read the article

• Will this increase my Virtual private Server failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• Why can't I connect to computers on my network using our external IP address?

  - by Kivin

  My home network is serviced by an ADSL line. The modem is in bridged mode. The router performs the PPPoE. Three computers are connected to the router: two wired Windows 7 boxes and a Ubuntu Linux box over wifi. The computers are hosting various forms of services including FTP and HTTP. The router has port forwarding mapped from the relevant ports to the reserved IP addresses for the computers. If I attempt to connect to a server inside the network, such as ftp://67.xx.xxx.xxx from inside the network, the request times out. However if I connect using the internally mapped address, such as ftp://192.168.0.100, all is well. This is a nuisance for setting up software, especially on the laptop which needs to be able to phone home from anywhere, and I just don't have enough expertise with networking to know why this is occurring to even have a clue whether it can be solved or not. edit: It should be noted that the servers can be accessible outside the network - say, at the starbucks across the street - perfectly fine, using the ISP provided address and the appropriate port.

  Read the article

• MySQL top count({column}) with a limit

  - by Josh K

  I have a table with an ip address column. I would like to find the top five addresses which are listed. Right now I'm planning it out the following: Select all distinct ip addresses Loop through them all saying count(id) where IP='{ip}' and storing the count List the top five counts. Downsides include what if I have 500 ip addresses. That's 500 queries I have to run to figure out what are the top five. I'd like to build a query like so select ip from table where 1 order by count({distinct ip}) asc limit 5

  Read the article

• What are best practices on virtual lab/test bed architecture?

  - by WooYek

  I am currently preparing a new small virtual environment for development and testing with Windows Server + SQL Server + AD + Sharepoint + Exchange + IIS(ASP.NET) + Biztalk + ?, for a small (up to 5) dev team. What are pros and cons on different approaches, eg. splitting up over different machines or packing everything up per machine. I your experience what are the best practices I should follow in terms of architecture and various system/servers placement. What to share and what to split per person. I would like to achieve some flexibility for the dev and testing process (so teammebers would not be steeping on each other's toes) and limit administrative effort needed to propagate settings, integrate work items and revert changes when something breaks up. It's not supposed to be an everyday development working environment, more a tier 2 developer testing environment, and not yet an integration or QA testing environment with formal change process. IMO the two borderline solutions are: creating one all-inclusive machine for each dev team member giving them freedom to manage creating shared environment managed by the one with somehow formalized change request process What golden mean would you recommend, and why?

  Read the article

• added ip-based virtual host to sites-available and created symlink to sites-enabled...but new domain

  - by lililili

  I added ip-based virtual host to sites-availble and created symlink to sites-enabled, but new domain times out. When i navigate to mynewdomain.com it says connection timed out. NameVirtualHost 12.12.12.12 <VirtualHost 12.12.12.12> ServerAdmin webmaster@localhost ServerName newdomain.com DocumentRoot /var/www/newdomain.com <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

  Read the article

• Can I use CNAME with ip address? Why If works (sometimes)?

  - by Maciek Sawicki

  I believe that the easiest answer for the first question is "No, You have "A" for this", but I accidentally setup some subdomain using CNAME pointing to ip address and it worked on few computers in my office. I wonder how it was possible? Now, when I'm checking it from home I have following error: beast:~ viroos$ host somesubdomain.somedomain.com Host somesubdomain.somedomain.com not found: 3(NXDOMAIN) I'm 100% it used to work at my office (currently it looks like it doesn't, but I'm checking it on different machine). Therefore I'm not 100% if it worked due to some special network setup or because I tested it just after adding DNS entry. I know this story sounds, a little crazy/incredibly, but can someone help me solve this puzzle. //edit: I'm adding dig output ; <<>> DiG 9.6-ESV-R4-P3 <<>> somesubdomain.somedomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 60224 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;somesubdomain.somedomain.com. IN A ;; ANSWER SECTION: somesubdomain.somedomain.com. 67 IN CNAME xxx.xxx.xxx.xx1. ;; AUTHORITY SECTION: . 1800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012040901 1800 900 604800 86400 ;; Query time: 72 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Apr 10 00:11:01 2012 ;; MSG SIZE rcvd: 136

  Read the article

• No persister for: <ClassName> issue with Fluent NHibernate

  - by Amit

  I have following code: //AutoMapConfig.cs using System; using FluentNHibernate.Automapping; namespace SimpleFNH.AutoMap { public class AutoMapConfig : DefaultAutomappingConfiguration { public override bool ShouldMap(Type type) { return type.Namespace == "Examples.FirstAutomappedProject.Entities"; } } } //CascadeConvention.cs using FluentNHibernate.Conventions; using FluentNHibernate.Conventions.Instances; namespace SimpleFNH.AutoMap { public class CascadeConvention : IReferenceConvention, IHasManyConvention, IHasManyToManyConvention { public void Apply(IManyToOneInstance instance) { instance.Cascade.All(); } public void Apply(IOneToManyCollectionInstance instance) { instance.Cascade.All(); } public void Apply(IManyToManyCollectionInstance instance) { instance.Cascade.All(); } } } //Item.cs namespace SimpleFNH.Entities { public class Item { public virtual long ID { get; set; } public virtual string ItemName { get; set; } public virtual string Description { get; set; } public virtual OrderItem OrderItem { get; set; } } } //OrderItem.cs namespace SimpleFNH.Entities { public class OrderItem { public virtual long ID { get; set; } public virtual int Quantity { get; set; } public virtual Item Item { get; set; } public virtual ProductOrder ProductOrder { get; set; } public virtual void AddItem(Item item) { item.OrderItem = this; } } } using System; using System.Collections.Generic; //ProductOrder.cs namespace SimpleFNH.Entities { public class ProductOrder { public virtual long ID { get; set; } public virtual DateTime OrderDate { get; set; } public virtual string CustomerName { get; set; } public virtual IList<OrderItem> OrderItems { get; set; } public ProductOrder() { OrderItems = new List<OrderItem>(); } public virtual void AddOrderItems(params OrderItem[] items) { foreach (var item in items) { OrderItems.Add(item); item.ProductOrder = this; } } } } //NHibernateRepo.cs using FluentNHibernate.Cfg; using FluentNHibernate.Cfg.Db; using NHibernate; using NHibernate.Criterion; using NHibernate.Tool.hbm2ddl; namespace SimpleFNH.Repository { public class NHibernateRepo { private static ISessionFactory _sessionFactory; private static ISessionFactory SessionFactory { get { if (_sessionFactory == null) InitializeSessionFactory(); return _sessionFactory; } } private static void InitializeSessionFactory() { _sessionFactory = Fluently.Configure().Database( MsSqlConfiguration.MsSql2008.ConnectionString( @"server=Amit-PC\SQLEXPRESS;database=SimpleFNH;Trusted_Connection=True;").ShowSql()). Mappings(m => m.FluentMappings.AddFromAssemblyOf<Order>()).ExposeConfiguration( cfg => new SchemaExport(cfg).Create(true, true)).BuildSessionFactory(); } public static ISession OpenSession() { return SessionFactory.OpenSession(); } } } //Program.cs using System; using System.Collections.Generic; using System.Linq; using SimpleFNH.Entities; using SimpleFNH.Repository; namespace SimpleFNH { class Program { static void Main(string[] args) { using (var session = NHibernateRepo.OpenSession()) { using (var transaction = session.BeginTransaction()) { var item1 = new Item { ItemName = "item 1", Description = "test 1" }; var item2 = new Item { ItemName = "item 2", Description = "test 2" }; var item3 = new Item { ItemName = "item 3", Description = "test 3" }; var orderItem1 = new OrderItem { Item = item1, Quantity = 2 }; var orderItem2 = new OrderItem { Item = item2, Quantity = 4 }; var orderItem3 = new OrderItem { Item = item3, Quantity = 5 }; var productOrder = new ProductOrder { CustomerName = "Amit", OrderDate = DateTime.Now, OrderItems = new List<OrderItem> { orderItem1, orderItem2, orderItem3 } }; productOrder.AddOrderItems(orderItem1, orderItem2, orderItem3); session.Save(productOrder); transaction.Commit(); } } using (var session = NHibernateRepo.OpenSession()) { // retreive all stores and display them using (session.BeginTransaction()) { var orders = session.CreateCriteria(typeof(ProductOrder)) .List<ProductOrder>(); foreach (var item in orders) { Console.WriteLine(item.OrderItems.First().Quantity); } } } } } } I tried many variations to get it working but i get an error saying No persister for: SimpleFNH.Entities.ProductOrder Can someone help me get it working? I wanted to create a simple program which will set a pattern for my bigger project but it is taking quite a lot of time than expected. It would be rally helpful if you can explain in simple terms on any template/pattern that i can use to get fluent nHibernate working. The above code uses auto mapping, which i tried after i tried with fluent mapping.

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• SQL Server 2008: Getting Login failed for user "Domain\User". Failed to open the explicitly specified database [CLIENT: IP.ADD.RR.ESS]

  - by GodEater

  This is a very similar issue to " SQL Server 2008 login problem with ASP.NET application: Failed to open the explicitly specified database " which unfortunately seems to have gone unsolved. My issue here is subtly different. Firstly the account failing login is not 'NT AUTHORITY\NETWORK SERVICE' - it's an actual domain account. Secondly, there are two machines involved - I gathered from the first question it was a single machine running both the IIS and SQL instances. The application which is trying to connect to the database is an ASP.NET one running on another server (if that makes any different, I'm not sure it does.) The ConnectionString being used in the web.config for the application is : data source=MySQLServer;initial catalog=MyDatabase;integrated security=sspi; And the Application Pool is set to NetworkService for Identity. So - in the web app, I get the following error : Cannot open database "MyDatabase" requested by the login. The login failed. Login failed for user 'MyDomain\WebServerMachineName$' In the SQL Server logs I see : Login failed for user 'MyDomain\WebServerMachineName$'. Reason: Failed to open the explicitly specified database. [CLIENT: Web.Server.IP.Address] Running this bit of SQL against the database in question : USE [MyDatabase] GO SELECT SDP.name AS [User Name], SDP.type_desc AS [User Type], UPPER(SDPS.name) AS [Database Role] FROM sys.database_principals SDP INNER JOIN sys.database_role_members SDRM ON SDP.principal_id=SDRM.member_principal_id INNER JOIN sys.database_principals SDPS ON SDRM.role_principal_id = SDPS.principal_id Gets me this result : MyDomain\WebServerMachineName$ WINDOWS_USER DB_DDLADMIN MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAREADER MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAWRITER Which appears to me to indicate I've got the permissions right. Anyone have any idea why it's not working, or how I can narrow the issue down some more?

  Read the article

• About to go live: virtual dedicated server or cloud?

  - by morpheous

  I am about to launch my startup company, and we will be going live in a few weeks time. We have really tight budgetary constraints, since we are bootstrapping - and would prefer not to raise external capital. I cant use shared hosting because I need more control of the server machine (for technical reasons - e.g. using proprietary extensions to PHP, Apache and in the database layer as well) - but want to control costs and dont want to go fully private server route, until we have determined the market size etc. So the only real alternatives AFAIK is between virtual server and the cloud. At the moment, cloud services seem a bit "vague" to me. My understanding is that they allow an entity to outsource its IT infrastructure, which in my mind (at least), is indistinguishable from what a hosting provider provides (at least from a functional point of view) - I would like to seek some clarification on exactly what the difference between the two is. Back to my original question, my requirements are: IT infrastructure that can scale with growth Ability to have control of the machine (for e.g. to install our internally developed libraries etc) Backup software that is flexible and comprehensive enough (yet simple to use), that allows a (secured) backup strategy to be implemented. On this issue, I have always wondered where the actual backed up data was stored (since the physical machines are remote, and one cant get access to any actual tapes etc backed onto). I would also like some advice and recommendations in this area. Regarding data size, I am expecting the dataset to be increasing by a few megabytes of data (originally, say 10Mb, in about a years time, possibly 50Mb) every day. As an aside, I have decided to deploy on a Debian server (most of my additional libraries etc were compiled and built on a Debian machine). Mindful of all of the above, I would like some advice (and reason) as to which route to take. I would also like some advice on which backup software to use, from people who have walked a similar path.

  Read the article

• DNS Zone file and virtual host question (repost because my question got moved and now I can't comment on the original for some reason)

  - by Jake

  Sorry this is a repost, the original question got moved to here form stack overflow and for some reason I can't comment or respond to answers on that one anymore. Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. I also don't see any .db files or files named SITENAME in named.conf's directory. Any ideas where these illusive pre-existing db files could be?

  Read the article

• Windows Server 2008 can't start postgresql-x64-9.0 service: could not create any TCP/IP sockets

  - by Rob

  After rebooting a Windows Server 2008 machine to apply system updates, we recently we began having some issues running PostgreSQL 9.0. When we noticed the problem, we reverted the Windows updates, but the issue persists: From services.msc, attempting to start the postgresql-x64-9.0 service fails. Half-way through starting the progress bar becomes very slow, and eventually responds with error 1053; "the service did not respond in a timely fashion." Interestingly enough, bringing up the task manager shows multiple instances of postgres.exe have been started, and looking at the log file shows: 2011-02-10 14:44:02 ESTLOG: database system is ready to accept connections I then tried killing the processes, and starting via the command-line (as the user postgres), but I receive a different error: C:/Program Files/PostgreSQL/9.0/bin/pg_ctl.exe start -N "postgresql-x64-9.0" -D "F:/SHARE/postgres" -w waiting for server to start............................................................... pg_ctl: could not start server ESTWARNING: could not create listen socket for "192.168.0.101" ESTFATAL: could not create any TCP/IP sockets The log file again indicates that the database is ready to accept connections. Also, using netstat indicates that no other processes are using port 5432; I can't think of any other obvious reason that opening the listen socket might fail. Any help would be greatly appreciated.

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >