Search Results

Search found 5619 results on 225 pages for 'starts'.

Page 200/225 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • cherrypy fails to stop when puppet tries to ensure running and refresh it at the same time

    - by ento
    I am trying to manage a cherrypy service with puppet. However, when the configuration is applied, cherryd ends up with no PID file although the process is up and running. Since the PID file is lost I can no longer stop the process with /etc/init.d/mycherryd stop (unless I modify the handmade init script to lookup the PID with ps or something.) $ /etc/init.d/mycherryd status cherryd dead but subsys locked The problem seems to be that puppet is trying to refresh/restart cherryd (triggered by changes in configuration files) immediately after ensuring it's running (as specified in the manifest), and cherrypy fails to stop and start (restart) itself while still executing its startup process. Is there a clear cut solution to this problem? Is this a bug on the cherrypy side, or can I write a puppet manifest so refresh is called only after the service is up and running? Any suggestion welcome. cherrypy log See how cherrypy catches SIGTERM midway through startup and still starts to listen. :cherrypy.error[18666] 2010-02-12 13:10:23,551 INFO: ENGINE Listening for SIGHUP. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGTERM. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGUSR1. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Bus STARTING :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE Daemonized to PID: 18671 :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE PID 18671 written to '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,555 INFO: ENGINE Started monitor thread '_TimeoutMonitor'. :cherrypy.error[18670] 2010-02-12 13:10:23,556 INFO: ENGINE Forking twice. :cherrypy.error[18666] 2010-02-12 13:10:23,557 INFO: ENGINE Forking once. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Caught signal SIGTERM. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Bus STOPPING :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 12380)) already shut down :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Stopped thread '_TimeoutMonitor'. :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Bus STOPPED :cherrypy.error[18671] 2010-02-12 13:10:23,732 INFO: ENGINE Bus EXITING :cherrypy.error[18671] 2010-02-12 13:10:23,759 INFO: ENGINE PID file removed: '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,782 INFO: ENGINE Bus EXITED :cherrypy.error[18671] 2010-02-12 13:10:23,792 INFO: ENGINE Serving on 0.0.0.0:12380 :cherrypy.error[18671] 2010-02-12 13:10:23,826 INFO: ENGINE Bus STARTED puppet log puppet tries to refresh the service immediately after ensuring it to be 'running'. Feb 12 13:10:22 localhost puppetd[8159]: (//mycherrypy/File[conffiles]) Scheduling refresh of Service[cherryd] Feb 12 13:10:22 localhost last message repeated 12 times Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]/ensure) ensure changed 'stopped' to 'running' Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Triggering 'refresh' from 13 dependencies Feb 12 13:11:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Failed to call refresh on Service[mycherryd]: Could not stop Service[mycherryd]: Execution of '/sbin/service mycherryd stop' returned 1: at /etc/puppet/manifests/mycherrypy.pp:161 Feb 12 13:11:24 localhost puppetd[8159]: Value of 'preferred_serialization_format' (pson) is invalid for report, using default (marshal) Feb 12 13:11:24 localhost puppetd[8159]: Finished catalog run in 99.25 seconds puppet manifest excerpt class mycherrypy { file { 'rpm': path => "/tmp/${apiserver}.i386.rpm", source => "${fileserver}/${apiserver}.i386.rpm"; 'conffiles': require => Package["${apiserver}"], path => "${service_home}/config/", ensure => present, source => "${fileserver}/config/", notify => Service["mycherryd"]; } package { "$apiserver": provider => 'rpm', source => "/tmp/${apiserver}.i386.rpm", ensure => latest; } service { "mycherryd": require => [File["conffiles"], Package["${apiserver}"]], ensure => running, provider => redhat, hasstatus => true; } }

    Read the article

  • Server Admin is not allowing me to configure DNS

    - by Clinton Blackmore
    We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

    Read the article

  • Issues with Verizon's "Network Extender" device talking on my home network.

    - by Logan
    I recently switched my phone service to Verizon from ATT, and I get somewhat spotty service in my house. I called them and they sent me a "network extender" device for free. Its a femtocell that connects to my home network. The directions that come with it are very dumbed down, basically just say to connect it to your router and put it near a window (so it can get a GPS signal, it has to make sure its within the correct area before operating). The problem I'm having is the network light on it stays red. The troubleshooting information that came with it tells me this means there is a bad network connection. Its connected through an ASUS router running DD-WRT. No other devices on my network have a problem with it, including a Western Digital WDLIVE device, mine and my wife's cell phones (via wifi), a Wii, and an Xbox. If I connect the device directly to my cable modem, the light goes blue (which means good) and it starts working. So this tells me that its definately a configuration issue with my router. Verizon basically washed their hands of me when I connected it to my cable modem, and told me that its a router issue and to try a different router. Because normal people just have extra routers laying around their houses... When I connect it to the router, I can watch the DHCP Clients list on the status page, and the MAC of the network extender quickly fills up the clients list, grabbing every available DHCP address. Its like it grabs an address, can't connect to the internet, releases it, grabs another, then another, then another. So in the DHCP server settings I assigned a static IP to its MAC. This made it quit doing what it was doing before, but its still not working. I found the ports I needed to open on verizon's website, and opened them in the port forwarding config on my router. This still didn't help. So, I tried setting the network extender device's IP as the DMZ IP on the router. This still did no good. I called Verizon back and got the tech to write up a report which he passed on to a "senior network tech" who I got a call back from a few hours ago. This guy told me that while an ASUS router isn't listed as a supported device, he's not really sure why its not working. He suggested restoring the firmware to stock ASUS firmware and trying again. I have a very hard time believing its DD-WRT doing this, since every other device is working just fine with it. But its also not the Network Extender, since it works just fine when connected directly to the modem. At this point I'm out of ideas, and the next step is to restore the stock firmware on my router, and then going to walmart and getting a linksys WRT-54G to try. Is there anything else I could try before going that drastic? Cliffs- -Network extender won't work behind router, works when connected directly to cable modem. -Extender goes nuts when allowed to pick its own DHCP address, I had to assign it a static IP. -Won't work when correct ports are forwarded to it -Won't work with a DMZ address.

    Read the article

  • ffserver-2.2 - streaming an ASF video as Webm output with ffserver on Debian 7.5

    - by Emmanuel Brunet
    I'm trying to stream an IP webcam ASF live stream to a ffserver to output a webm video format. The server starts successfully but the ffserver commands used to feed the ffserver fails and generates a core dump. Input stream $ ffprobe http://account:password@webcam/videostream.asf Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, 1 channels, s16p, 32 kb/s ffserver configuration my ffserver configuration is : Port 8091 RTSPPort 554 BindAddress 192.168.1.62 MaxHTTPConnections 1000 MaxClients 100 MaxBandwidth 1000 CustomLog - <Feed webcam.ffm> File /tmp/webcam.ffm FileMaxSize 500M ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Feed> <Stream webcam.webm> # Output stream URL definition Feed webcam.ffm # Feed from which to receive video Format webm # Audio settings AudioCodec vorbis AudioBitRate 64 # Audio bitrate # Video settings VideoCodec libvpx VideoSize 640x480 # Video resolution VideoFrameRate 25 # Video FPS AVOptionVideo flags +global_header # Parameters passed to encoder # (same as ffmpeg command-line parameters) AVOptionVideo cpu-used 0 AVOptionVideo qmin 10 AVOptionVideo qmax 42 AVOptionVideo quality good AVOptionAudio flags +global_header PreRoll 15 StartSendOnKey # VideoBitRate 32 # Video bitrate </Stream> <Stream status.html> Format status # Only allow local people to get the status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream> ffmpeg feed I run the following command that fails $ ffmpeg -i http://account:password@webcam/videostream.asf http://ffserver_ip:port/webcam.ffm http://192.168.1.62:8091/webcam.ffm Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x36a80c0] deprecated pixel format used, make sure you did set range correctly Segmentation fault I tryed $ ffmpeg -i http://account:password@webcam/videostream.asf -pix_fmt yuv420p http://ffserver_ip:port/webcam.ffm But it raises the same error. Thanks for your help Edit For an easy testing (I thought), I tried to publish the whole ASF stream as is, meaning connecting the ASF webcam output stream to the ffserver that outputs ASF format too. And thus with mirrored encoding so I changed the ffserver configuration to ... <Stream webcam.asf> Feed webcam.ffm Format asf VideoFrameRate 25 VideoSize 640X480 VideoBitRate 256 VideoBufferSize 1000 VideoGopSize 30 AudioBitRate 32 StartSendOnKey </Stream> ... And the output is now : Input #0, asf, from 'http://admin:alpha1237@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 1k tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x3d620c0] deprecated pixel format used, make sure you did set range correctly Output #0, ffm, to 'http://192.168.1.62:8091/webcam.ffm': Metadata: creation_time : now encoder : Lavf55.40.100 Stream #0:0: Audio: wmav2, 22050 Hz, mono, fltp, 32 kb/s Metadata: encoder : Lavc55.64.100 wmav2 Stream #0:1: Video: msmpeg4v3 (msmpeg4), yuv420p, 640x480, q=2-31, 256 kb/s, 1k fps, 1000k tbn, 1k tbc Metadata: Stream mapping: Stream #0:1 -> #0:0 (adpcm_ima_wav -> wmav2) Stream #0:0 -> #0:1 (mjpeg -> msmpeg4) Press [q] to stop, [?] for help Segmentation fault I can't even forward the stream. Thanks for your help again.

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • Outlook 2007 Does Not Accept Login Credentials, OWA Webmail Does. Troubleshooting Advice?

    - by Chris
    I am trying to connect Outlook 2007 to Exchange (Hosted Exchange from Rackspace). Soon, I will need to roll this out for our entire office. With the Exchange account added to Outlook, Outlook starts up and asks for the user's username and password. Unfortunately, it doesn't like the password I use for it. I can confirm this username (email address) and password combo works by using Outlook WebMail, and another user (in another network/office) confirmed the Exchange account does work within his Outlook client. In my network/office, I can confirm that an Outlook 2007 client (under Windows 7) can connect to the Hosted Exchange server from Rackspace. However, I have not been able to get Outlook 2007 (under Windows XP SP3) to connect to the very same Exchange server Outlook 2007 (under Windows 7) can connect to. Outlook continuously prompts me for the username and password and does not accept the correct combination. Now, regarding the Outlook client that cannot connect/login to Exchange: The user has full admin rights on the workstation We do not run a domain controller/LDAP The firewall on the workstation has been disabled Real time file scanning in Microsoft Security Essentials has been disabled There are no virus scanning applications that would interface with Outlook or an email server. The Exchange account is setup to run on a newly created Outlook profile The network firewall does not log any blocked attempts A packet capture at the router reveals communication between the workstation and the Exchange server or proxy (though, this is SSL encrypted, so I don't know what the computers are saying) I have applied a fix (Added DWORD value of 0 for DefConnectOpts under HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC) that was recommended to make RPC function when the workstation does not have a default gateway set. Workstation is configured as DHCP. This fix did nothing, and it may be worth noting the RPC subkey was not present until I added it. RPC service is running on the workstation The program is not running under any compatibility mode. Side note: Outlook 2007 installs with compatibility mode for XP enabled by default in windows 7. Outlook 2007 will not even try to connect to exchange if this compatibility mode is checked. In windows xp, I tried checking compatibility mode for windows 2000, and was unable to connect to exchange as well. Here is the specific configuration I've used in a blank outlook profile: Microsoft Exchange Server: ##MASKED##-MBX-C18.mex07a.mlsrvr.com Username: (Full Email Address: [email protected]) Password: ##MASKED## Outlook Anywhere: Connect to Microsoft Exchange using HTTP Exchange Proxy Settings: Proxy Server: mex07a.emailsrvr.com Check "Connect using SSL only" Under "Only connect to proxy servers...", enter: msstd:mex07a.emailsrvr.com Check "On fast networks, connect using HTTP first, then connect using TCP/IP" Check "On slow networks, connect using HTTP first, then connect using TCP/IP" Proxy authentication settings: Basic Authentication Notes: mex07a.mlsrvr.com and mex07a.emailsrvr.com may look incorrect at first glance, but this is not a typo - these instructions were handed down from rackspace and are confirmed to be working, just not on this workstation. I have tried to use the RpcPing utility but must have been using it wrong. I got as far as "Bad Interface Descriptor". It would seem to me getting Outlook and Exchange to work together would be a breeze, especially since everything is done over port 80 with web services. Unfortunately, the user is stuck with WebMail access only, because Outlook won't accept the Exchange credentials. Do you have any ideas of other things I could try to debug this issue further? Any and all help is greatly appreciated. Thank you! -Chris

    Read the article

  • Command-line video editing in Linux (cut, join and preview)

    - by sdaau
    I have rather simple editing needs - I need to cut up some videos, maybe insert some PNGs in between them, and join these videos (don't need transitions, effects, etc.). Basically, pitivi would do what I want - except, I use 640x480 30 fps AVI's from a camera, and as soon as I put in over a couple of minutes of that kind of material, pitivi starts freezing on preview, and thus becomes unusable. So, I started looking for a command line tool for Linux; I guess only ffmpeg (command line - Using ffmpeg to cut up video - Super User) and mplayer (Sam - Edit video file with mencoder under linux) are so far candidates, but I cannot find examples of the use I have in mind.   Basically, I'd imagine there's an encoder and player tools (like ffmpeg vs ffplay; or mencoder vs mplayer) - such that, to begin with, the edit sequence could be specified directly on the command line, preferably with frame resolution - a pseudocode would look like: videnctool -compose --file=vid1.avi --start=00:00:30:12 --end=00:01:45:00 --file=vid2.avi --start=00:05:00:00 --end=00:07:12:25 --file=mypicture.png --duration=00:00:02:00 --file=vid3.avi --start=00:02:00:00 --end=00:02:45:10 --output=editedvid.avi ... or, it could have a "playlist" text file, like: vid1.avi 00:00:30:12 00:01:45:00 vid2.avi 00:05:00:00 00:07:12:25 mypicture.png - 00:00:02:00 vid3.avi 00:02:00:00 00:02:45:10 ... so it could be called with videnctool -compose --playlist=playlist.txt --output=editedvid.avi The idea here would be that all of the videos are in the same format - allowing the tool to avoid transcoding, and just do a "raw copy" instead (as in mencoder's copy codec: "-oac copy -ovc copy") - or in lack of that, uncompressed audio/video would be OK (although it would eat a bit of space). In the case of the still image, the tool would use the encoding set by the video files.   The thing is, I can so far see that mencoder and ffmpeg can operate on individual files; e.g. cut a single section from a single file, or join files (mencoder also has Edit Decision Lists (EDL), which can be used to do frame-exact cutting - so you can define multiple cut regions, but it's again attributed to a single file). Which implies I have to work on cutting pieces first from individual files first (each of which would demand own temporary file on disk), and then joining them in a final video file. I would then imagine, that there is a corresponding player tool, which can read the same command line option format / playlist file as the encoding tool - except it will not generate an output file, but instead play the video; e.g. in pseudocode: vidplaytool --playlist=playlist.txt --start=00:01:14 --end=00:03:13 ... and, given there's enough memory, it would generate a low-res video preview in RAM, and play it back in a window, while offering some limited interaction ( like mplayer's keyboard shortcuts for play, pause, rewind, step frame). Of course, I'd imagine the start and end times to refer to the entire playlist, and include any file that may end up in that region in the playlist. Thus, the end result of all this would be: command line operation; no temporary files while doing the editing - and also no temporary files (nor transcoding) when rendering final output... which I myself think would be nice. So, while I think that all of the above may be a bit of a stretch - does there exist anything that would approximate the workflow described above?

    Read the article

  • Windows 7 sometimes boots in VGA mode

    - by TuxRug
    I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

    Read the article

  • Centos 7. Freeradius fails to start on boot

    - by Alex
    I was messing around with FreeRADIUS and MySQL (MariaDB) and it seems FreeRADIUS service can't start properly on startup. But it starts fine using root user or in debug mode (radiusd -X) and works just fine! Debug mode shows no errors. systemctl command shows that radiusd.service has failed to start. /var/log/messages output: Aug 21 15:52:29 nexus-test systemd: Starting The Apache HTTP Server... Aug 21 15:52:29 nexus-test systemd: Starting MariaDB database server... Aug 21 15:52:29 nexus-test systemd: Starting FreeRADIUS high performance RADIUS server.... Aug 21 15:52:29 nexus-test systemd: Started OpenSSH server daemon. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Logging to '/var/log/mariadb/mariadb.log'. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql Aug 21 15:52:30 nexus-test systemd: Started Postfix Mail Transport Agent. Aug 21 15:52:30 nexus-test avahi-daemon[604]: Registering new address record for fe80::250:56ff:fe85:e4af on eth0.*. Aug 21 15:52:30 nexus-test systemd: radiusd.service: control process exited, code=exited status=1 Aug 21 15:52:30 nexus-test systemd: Failed to start FreeRADIUS high performance RADIUS server.. Aug 21 15:52:30 nexus-test systemd: Unit radiusd.service entered failed state. Aug 21 15:52:31 nexus-test kdumpctl: kexec: loaded kdump kernel Aug 21 15:52:31 nexus-test kdumpctl: Starting kdump: [OK] Aug 21 15:52:31 nexus-test systemd: Started Crash recovery kernel arming. Aug 21 15:52:31 nexus-test systemd: Started The Apache HTTP Server. Aug 21 15:52:31 nexus-test systemd: Started MariaDB database server. /var/log/radius/radius.log output: Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Attempting to connect to database "radius" Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Opening additional connection (0) Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Couldn't connect socket to MySQL server radius@localhost:radius Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Mysql error 'Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)' Thu Aug 21 15:24:16 2014 : Error: rlm_sql (sql): Opening connection failed (0) Thu Aug 21 15:24:16 2014 : Error: /etc/raddb/mods-enabled/sql[47]: Instantiation failed for module "sql" After seeing this I tried to replicate the problem, killed mariadb.service and started to run debug mode again. And it spits out the same problem as in the radius.log. I tried disabling iptables and firewalld and rebooting, but no luck: systemctl disable iptables systemctl disable firewalld So maybe the problem is in the process startup order or delay of some kind. Maybe FreeRADIUS's SQL module can't connect to not yet started MariaDB? If it, how can I fix this? In earlier versions of RHEL/CENTOS I know you easily see service start order in like rc.d or stuff, now IDK. I am new to this fancy "systemd", "systemctl", "firewalld" stuff Centos 7 introduced so sorry I'm a little bit confused. Also this new FreeRADIUS 3 structure... PS. MariaDB is enabled on startup, credentials in FR DB configuration are correct A little update: cat /etc/systemd/system/multi-user.target.wants/radiusd.service output: [Unit] Description=FreeRADIUS high performance RADIUS server. After=syslog.target network.target [Service] Type=forking PIDFile=/var/run/radiusd/radiusd.pid ExecStartPre=-/bin/chown -R radiusd.radiusd /var/run/radiusd ExecStartPre=/usr/sbin/radiusd -C ExecStart=/usr/sbin/radiusd -d /etc/raddb ExecReload=/usr/sbin/radiusd -C ExecReload=/bin/kill -HUP $MAINPID [Install] WantedBy=multi-user.target

    Read the article

  • LDAP object class violation: attribute ou not allowed in suffix?

    - by Paramaeleon
    I am about to set up a LDAP directory. It is used as a tool to communicate user permissions from a web application to WebDav file system access, e.g. adding a user to the web platform shall allow login to the file system with the same credentials. There are no other usages intended. Following this German tutorial which encourages the use of the attributes c, o, ou etc. over dc, I configured the following suffix and root: suffix "ou=webtool,o=myOrg,c=de" rootdn "cn=ldapadmin,ou=webtool,o=myOrg,c=de" Server starts and I can connect to it by LDAP Admin, which reports “LDAP error: Object lacks”. Well, there aren’t any objects yet. I now want to create the root and admin elements from shell. I created an init.ldif file: dn: ou=webtool,o=myOrg,c=de objectclass: dcObject objectclass: organization dc: webtool o: webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Trying to load the file runs into an error, telling me that ou is not allowed: server:~ # ldapadd -x -D "cn=ldapadmin,ou=webtool,o=myOrg,c=de" -W -f init.ldif Enter LDAP Password: adding new entry "ou=webtool,o=myOrg,c=de" ldap_add: Object class violation (65) additional info: attribute 'ou' not allowed I am not using ou anywhere except in the suffix, so the question: Isn’t it allowed here? What is allowed here? Here is my answer. I am not allowed to post it as answer for 8 hours, so don’t mind that it is part of the question by now. I will move it outside some day, if I don’t forget to do so. There are numberous dependencies for the creation of elements, and error messages are rather confusing if you don’t know of the concept. The objectclass isn’t necessarily dcObject for the databases’ root node, as it is likely to guess when you read several tutoriales. Instead, it must correspond to the object’s type: Here, for a name starting with ou=, it must be organizationalUnit. I found this piece of information in these tables [Link removed due to restriction: Oops! Your edit couldn't be submitted because: We're sorry, but as a spam prevention mechanism, new users can only post a maximum of two hyperlinks. Earn more than 10 reputation to post more hyperlinks. Link is below]. Further on, the object class dictates which properties must and can be added in the record. Here, organizationalUnit must have an ou: entry and must not have neither dc: nor o: entry. The healthy init.ldif file looks like that: dn: ou=webtool,o=myOrg,c=de objectclass: organizationalUnit ou: LDAP server for my webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Note: The page also states: “While many objectClasses show no MUST attributes you must (ouch) follow any hierarchy […] to determine if this is the really case.” I thought that would mean my root record would have to provide the must fields for c= and o= (c: and o:, respectively) but this isn’t the case. Link in answer is (1): http :// www (dot) zytrax (dot) com/books/ldap/ape/ "Appendix E: LDAP - Object Classes and Attributes"

    Read the article

  • iCloud stuff stops working while connected to OpenVPN

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

    Read the article

  • Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

    - by Scott
    Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

    Read the article

  • Windows Service SearchIndexer.exe Crashes on Indexing

    - by Josh Jay
    Relevant Specs: Windows 7 Professional 64-bit SP1 Outlook 2010 Version 14.0.7116.5000 (32-bit) Original Symptom: In outlook, I attempted to search for an email but nothing ever returned and the indicator kept going like it was searching. Attempted Resolutions: I investigated the search options and with some research noticed the Windows Service "Windows Search" (SearchIndexer.exe) was not running. I attempted to start it but I receive this error message: "Windows could not start the Windows Search service on Local Computer. Error 1067: The process terminated unexpectedly." The Event Viewer gives this error entry: Log Name: Application Source: Application Error Date: 6/3/2014 11:02:05 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ***REMOVED FOR POST*** Description: Faulting application name: SearchIndexer.exe, version: 7.0.7601.17610, time stamp: 0x4dc0d019 Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677 Exception code: 0xc0000005 Fault offset: 0x000000000000940d Faulting process id: 0x6a0 Faulting application start time: 0x01cf7f3cc83757c6 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: 06424160-eb30-11e3-9555-843a4b07b336 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-06-03T15:02:05.000000000Z" /> <EventRecordID>602923</EventRecordID> <Channel>Application</Channel> <Computer>M6700-12011.ncaa.org</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7601.17610</Data> <Data>4dc0d019</Data> <Data>KERNELBASE.dll</Data> <Data>6.1.7601.18229</Data> <Data>51fb1677</Data> <Data>c0000005</Data> <Data>000000000000940d</Data> <Data>6a0</Data> <Data>01cf7f3cc83757c6</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\system32\KERNELBASE.dll</Data> <Data>06424160-eb30-11e3-9555-843a4b07b336</Data> </EventData> </Event> The regular windows search (from start menu) works fine, and if I reboot the machine the service starts up OK but as soon as it kicks off when I let the machine idle for long enough it crashes (same Event Viewer entry). We also tried the Microsoft Utility to no avail. Has anyone seen this issue before?

    Read the article

  • Why are USB 2.0 devices crashing my system?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Do hard drive enclosures fail/is it the HDD or enclosure?

    - by x0a
    I'm having a whole host of problems with an external hard drive that was working just fine a couple of hours ago. I've had this problem before once, and that was about 3 months ago, here's what I documented: So a couple of hours ago I turned off all my computers and shut off the power to all my devices in my room, then went and turned the power off at the main switch so I could change an outlet. A couple hours later, after I've already slowly turned everything back on, I go to my xbox to try and watch a movie and it can't seem to list any of the movies I've got. So I go to my desktop to find that my external hard drive isn't there.. even though it's on and connected. It's also stationary and hidden behind something so there's not a whole lot of tampering/physical wear to that external. I plug it into my laptop to try and see what's going on. It starts making this endless loud screeching noise. None of that clicking that's usually associated with hd damage. It's not listed in my computers, and it shows up in Disk Management as "uninitialized" asking me to choose between two different partition types. After carefully disconnecting it and connecting it back, it asks me to format it, which I cancel. I start googling about my issue, starting to accept the situation, torn as hell and helpless and just about ready to toss the thing. Suddenly the screeching stops, after almost 45 minutes of it going, and Disk Management lists the drive as "Online" and "Healthy". Explorer pops up with all my files! I'm still being really careful with it and weary and treating it as though it's in fragile shape. I've downloaded some S.M.A.R.T. software to read the values and everything is listed as "OK" . No reallocated sectors, no read errors, no seek errors. I also ran a quick self-test, which completed without error. Everything seems fine. It looks to be a perfectly healthy external hard drive. So what the hell was that about? Was it doing some sort of maintenance or self-test? How am I supposed to tell the difference? I would've undoubtedly killed the drive for sure if had it gone on a bit longer. I've got the same problem now, with one exception: it doesn't magically reappear after the screeching stops. Occasionally I manage to get some S.M.A.R.T. diagnostics information, which basically reads everything as fine. The only problem is that my HD isn't initializing (so I can't access anything in it). I'm able to successfully run a quick smart test but not an extended one (I've only tried it once but got conflicting indications as to whether it was actually making any progress or not (was stuck on Random read test). So, final question (if all else fails): Could the hard drive enclosure be failing rather than the HDD? Is this a likely possibility at all? How would I know?

    Read the article

  • Computer not POSTing "randomly"?

    - by smoth190
    I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

    Read the article

  • IPv6: Should I have private addresses?

    - by AlReece45
    Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

    Read the article

  • MySQL reserves too much RAM

    - by Buddy
    I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

    Read the article

  • MySQL InnoDB disappeared, all InnoDB data cant be accessed

    - by dogmatic69
    Mysql (including InnoDB) was working fine, after a restart the other day when mysql starts it says in the logs: 140604 23:36:07 [Note] Plugin 'FEDERATED' is disabled. 140604 23:36:07 [Note] Plugin 'InnoDB' is disabled. In the app it says: SQLSTATE[42000]: Syntax error or access violation: 1286 Unknown storage engine 'InnoDB' Now, according to google this is a very simple fix, just remove the ib_logfile[0|1] files, which I have done and does not do anything. I started by making a full copy of the data dir for testing various 'fixes'. I have also uninstalled mysql and reinstalled it with no change, I just cant get it to run with innodb working anymore :/ # mysql --version mysql Ver 14.14 Distrib 5.5.37, for debian-linux-gnu (x86_64) using readline 6.3 I have also tried the innodb_force_recovery setting, 0 - 6, Any time I run a command on an InnoDB table it says innodb_force_recovery LOGS (from around the time it died) was working here Version: '5.5.37-0ubuntu0.14.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 140530 1:24:22 [Note] /usr/sbin/mysqld: Normal shutdown 140530 1:24:22 [Note] Event Scheduler: Purging the queue. 0 events 140530 1:24:22 InnoDB: Starting shutdown... 140530 1:24:24 InnoDB: Shutdown completed; log sequence number 3345857316 140530 1:24:24 [Note] /usr/sbin/mysqld: Shutdown complete 140530 22:03:12 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140530 22:03:12 [Note] Plugin 'FEDERATED' is disabled. 140530 22:03:12 InnoDB: The InnoDB memory heap is disabled 140530 22:03:12 InnoDB: Mutexes and rw_locks use GCC atomic builtins 140530 22:03:12 InnoDB: Compressed tables use zlib 1.2.8 140530 22:03:12 InnoDB: Using Linux native AIO 140530 22:03:12 InnoDB: Initializing buffer pool, size = 128.0M 140530 22:03:12 InnoDB: Completed initialization of buffer pool 140530 22:03:12 InnoDB: highest supported file format is Barracuda. 140530 22:03:15 InnoDB: Waiting for the background threads to start 140530 22:03:16 InnoDB: 5.5.37 started; log sequence number 3345857316 140530 22:03:16 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140530 22:03:16 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140530 22:03:16 [Note] Server socket created on IP: '192.168.1.20'. 140530 22:03:16 [Note] Event Scheduler: Loaded 0 events 140530 22:03:16 [Note] /usr/sbin/mysqld: ready for connections. 140602 0:58:39 [Note] Event Scheduler: Purging the queue. 0 events 140602 0:58:39 InnoDB: Starting shutdown... 140602 0:58:41 InnoDB: Shutdown completed; log sequence number 3345954467 140602 0:58:41 [Note] /usr/sbin/mysqld: Shutdown complete does not work anymore 140602 21:45:19 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140602 21:45:19 [Note] Plugin 'FEDERATED' is disabled. 140602 21:45:19 [Note] Plugin 'InnoDB' is disabled. 140602 21:45:19 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140602 21:45:19 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140602 21:45:19 [Note] Server socket created on IP: '192.168.1.20'. 140602 21:45:19 [Note] Event Scheduler: Loaded 0 events 140602 21:45:19 [Note] /usr/sbin/mysqld: ready for connections.

    Read the article

  • Is this valid JFS partition?

    - by Coolmax
    This is my first question on StackExchange. My teacher gave my his laptop (with Fedora 16 on it) and compact flash card with data. He want to have access to files on card, but he couldn't get access to it. The problem is Linux don't know what type of partion is. I suppose there is JFS: root@debian:~# dmesg |grep sdc [ 9066.908223] sd 3:0:0:1: [sdc] 3940272 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 9066.962307] sd 3:0:0:1: [sdc] Write Protect is off [ 9066.962310] sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00 [ 9066.962312] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028420] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028637] sdc: unknown partition table [ 9067.097065] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.097281] sd 3:0:0:1: [sdc] Attached SCSI removable disk and some of data: root@debian:~# hexdump -Cn 65536 /dev/sdc 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00008000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 00008010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 00008020 00 20 00 00 00 09 20 10 02 00 00 00 00 00 00 00 |. .... .........| 00008030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 00008040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 00008050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 00008060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 00008070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00008080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 00008090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 000080a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 000080b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000080c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * [cut] * 0000f000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 0000f010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 0000f020 00 20 00 00 00 09 20 10 00 00 00 00 00 00 00 00 |. .... .........| 0000f030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 0000f040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 0000f050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 0000f060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 0000f070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 0000f090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 0000f0a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 0000f0b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f0c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00010000 I'm total newbie to filesystems. I googled and found that JFS superblock may starts on 0x8000 offset. But what next? How to mount this card? If there would be normal partition table I would expect 55 AA on 510th and 511th byte, but first 8000 bytes are clear. Any help would be greatly appreciated. And sorry for my bad english :) Kind regards.

    Read the article

  • Hard drive after PCB swap strange stuff

    - by ramyy
    I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

    Read the article

  • Monitor randomly shutting down, computer accepting no input, need to restart to get working

    - by Sebastian Lamerichs
    First off, spec list: OS: Windows 7 Ultimate 64-bit SP1 CPU: i7-4820k @ 3.7GHz (stock) GPU: Two 3GB Radeon HD 7970s @ 1.05GHz Mobo: AsRock X79 Extreme6 HDD: 2TB Seagate Barracuda 7200rpm RAM: 16GB quad-channel Kingston 1600MHz PSU: Antec HCG 900W Monitors: Acer S220HQL 1920x1080 + ViewSonic VA2251 1920x1080. Plugged into different GPUs. My problem is that, on a daily-ish basis, my monitors will turn off and not turn back on. My computer will still be running, GPU/CPU/case fans all still going, but the monitors will not turn back on. Additionally, it seems to cease all network activity. It doesn't seem to log any errors at all. I've verified that this is not a monitor issue, as when I press the num/caps/scroll lock buttons on my keyboard, the lights don't change, so the computer is clearly not accepting input. I have noticed a few other people on the internet with this problem, and some have claimed that it was solved by disabling PCI-Express Link State Power Management, but the issue still occurs for me after this. Whilst my CPU and GPUs both run at 100% 24/7, the temperatures are certainly not at dangerous levels, with the CPU averaging 65°C and the GPUs at 70°C and 78°C average. All components are brand new. I have tried forcing MSI Afterburner to start when Windows starts and to force a constant voltage, as this fixed the issue for a few days for another user, but he reported back saying that it had stopped working properly again, so I'm not putting too much faith in this working. Many people have said to adjust display sleep mode settings, but this will clearly not work, as the keyboard lights would still work if the monitors were the issue. The closest I can get to a log file for this issue is the following Folding@Home logs: 14:45:21:WU01:FS00:0x17:Completed 1120000 out of 2000000 steps (56%) 14:46:43:WU00:FS01:0x17:Completed 480000 out of 2000000 steps (24%) 14:46:49:WU01:FS00:0x17:Completed 1140000 out of 2000000 steps (57%) 14:48:30:WU01:FS00:0x17:Completed 1160000 out of 2000000 steps (58%) 14:49:55:WU01:FS00:0x17:Completed 1180000 out of 2000000 steps (59%) As you can see, the second GPU (FS01) stops computation approximately three and a half minutes before the issue occurs (it should be completing 1% every 80-120 seconds), and the first GPU (FS00) continues for a few minutes more before the logs just end. As far as I can tell, the computer has a network failure at the time the first GPU stops working, the latest IRC message I received from this time was at 14:47:58. That being said, there could have just not been any messages between then and 14:50:00, so I'm going to be connecting a laptop to the same bouncer to double-check if it happens again. The GPUs functioned perfectly well in another computer for a significant period of time, so I'm fairly confident that they aren't the issue, which means that this is being caused by either software or the motherboard, or possibly RAM. I really hope it's software. I heard from a forum board that there was a patch from Microsoft that fixed this problem, but "I've forgot which KB it was or the google search terms I used to find the patch, LOL.", so that's not much help. Haven't seen it mentioned by anyone else on about a dozen threads about this issue either. The computer is plugged in via a surge-protected power board, and I've run several other computers and pieces of hardware through it with no issues, so that is not the cause. I have just set the hard disk to never turn off, although I don't believe that that will solve the issue. Strangely, this has only happened when I'm not at the computer (which is actually a minority of the time). Until today it had only happened when I had not been actively using the computer for 6 hours, but today it happened within 10-30 minutes of me last using the computer actively. I have enabled file logging from MSI Afterburner, so hopefully this will shed some light on the issue, but I'm not too optimistic. I've heard that it could be a motherboard problem, but I figured I should ask around before RMAing it. Any help?

    Read the article

  • SignalR Server Error "The ConnectionId is in the incorrect format." with SignalR-ObjC Library

    - by ozzotto
    Before asking a separate question I've done lots of googling about it and added a comment in the already existing stackoverflow question. I have a SignalR Hub (tried both v. 1.1.3 and 2.0.0-rc) in my server with the below code: [HubName("TestHub")] public class TestHub : Hub { [Authorize] public void TestMethod(string test) { //some stuff here Clients.Caller.NotifyOnTestCompleted(); } } The problem persists if I remove the Authorize attribute. And in my iOS client I try to call it with the below code: SRHubConnection *hubConnection = [SRHubConnection connectionWithURL:_baseURL]; SRHubProxy *hubProxy = [hubConnection createHubProxy:@"TestHub"]; [hubProxy on:@"NotifyOnTestCompleted" perform:self selector:@selector(stopConnection)]; hubConnection.started = ^{ [hubProxy invoke:@"TestMethod" withArgs:@[@"test"]]; }; //received, error handling [hubConnection start]; When the app starts the user is not logged in and there is no open SignalR connection. The users logs in by calling a Login service in the server which makes use of WebSecurity.Login method. If the login service returns success I then make the above call to SignalR Hub and I get the server error 500 with description "The ConnectionId is in the incorrect format.". The full server stacktrace is the following: Exception information: Exception type: InvalidOperationException Exception message: The ConnectionId is in the incorrect format. at Microsoft.AspNet.SignalR.PersistentConnection.GetConnectionId(HostContext context, String connectionToken) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.Hubs.HubDispatcher.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(IDictionary`2 environment) at Microsoft.Owin.Mapping.MapMiddleware.<Invoke>d__0.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.EndFinalWork(IAsyncResult ar) at System.Web.HttpApplication.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Request information: Request URL: http://myserverip/signalr/signalr/connect?transport=webSockets&connectionToken=axJs EQMZxpmUopL36owSUkdhNs85E0fyB2XvV5R5znZfXYI/CiPbTRQ3kASc3 mq60cLkZU7coYo1P fbC0U1LR2rI6WIvCNIMOmv/mHut/Unt9mX3XFkQb053DmWgCan5zHA==&connectionData=[{"Name":"testhub"}] Request path: /signalr/signalr/connect User host address: User: Is authenticated: False Authentication Type: Thread account name: IIS APPPOOL\DefaultAppPool Thread information: Thread ID: 14 Thread account name: IIS APPPOOL\DefaultAppPool Is impersonating: True Stack trace: at Microsoft.AspNet.SignalR.PersistentConnection.GetConnectionId(HostContext context, String connectionToken) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.Hubs.HubDispatcher.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(IDictionary`2 environment) at Microsoft.Owin.Mapping.MapMiddleware.<Invoke>d__0.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.EndFinalWork(IAsyncResult ar) at System.Web.HttpApplication.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I understand this is some kind of authentication and user identity mismatching but up to now I have found no way of solving it. All other questions suggest stoping the opened connection when the user identity changes but as I mentioned above I have no open connection before the user logs in successfully. Any help would be much appreciated. Thank you.

    Read the article

  • Deploying MVC2 application to IIS7.5 - Ninject asked to provide controllers for content files

    - by Rune Jacobsen
    I have an application that started life as an MVC (1.0) app in Visual Studio 2008 Sp1 with a bunch of Silverlight 3 projects as part of the site. Nothing fancy at all. Using Ninject for dependency injection (first version 2 beta, now the released version 2 with the MVC extensions). With the release of .Net 4.0, VS2010, MVC2 etc., we decided to move the application to the newest platform. The conversion wizard in VS2010 apparently took care of everything, with one exception - it didn't change references to mvc1 to now point to mvc2, so I had to do that manually. Of course, this makes me think about other MVC2 things that could be missing from my app, that would be there if I did File - New Project... But that is not the focus of this question. When I deploy this application to the IIS 7.5 server (running on Win2008 R2 x64), the application as such works. However, images, scripts and other static content doesn't seem to exist. Of course they are there on disk on the server, but they don't show up in the client web browser. I am fairly new to IIS, so the only trick I knew is to try to open the web page in a browser on the server, as that could give me more information. And here, finally, we meet our enemy. If I try to go directly to the URL of one of the images (http://server/Content/someimage.jpg for instance), I get the following error in the browser: The IControllerFactory 'Ninject.Web.Mvc.NinjectControllerFactory' did not return a controller for a controller named 'Content'. Aha. The web server tries to feed this request to MVC, who with its' default routing setup assumes Content to be a controller, and fails. How can I get it to treat Content/ and Scripts/ (among others) as non-controllers and just pass through the static content? This of course works with Cassini on my developer machine, but as soon as I deploy, this problem hits. I am using the last version of Ninject MVC 2 where the IoC tool should pass missing controllers to the base controller factory, but this has apparently not helped. I have also tried to add ignore routes for Content etc., but this apparently has no effect either. I am not even sure I am addressing the problem on the right level. Does anyone know where to look to get this app going? I have full control of the web server so I can more or less do whatever I want to it, as long as it starts working. Thanks!

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >