Search Results

Search found 16628 results on 666 pages for 'setup kit'.

Page 201/666 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

  • Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

    - by DragonLord
    One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

    Read the article

  • Subversion Apache Ubuntu - Remote Access?

    - by Hollowsteps
    Okay, a couple days ago I built a bare bones kit into a machine. I've been running through tutorials to get it to work and right now I've gotten as far as making it available in my lan, hooray! However, I cannot access the repositories remotely. Any machine on the lan can easily access it through the hostname or, using 'outbound ip/hostname' or 'outbound ip/machine ip'. The machine can be pinged from a remote, non-lan machine and responds. I just can't get anyone into it outside of my lan. I've been trying to figure it out but I'm lost. I'm breaking a few rules and if any of these would be my problem, please indicate. I don't think I have a static IP (However I check my outbound IP whenever I do testing, is that not enough? It has stayed the same for 5+ days) I have not discussed this set-up with my service provider (Does Optimum Online block port 80? If so, can I just switch apache to listen on a different port?) I am in the DMZ of my router. This is what allowed it to be pinged remotely. For security reasons the machine that is in that zone is turned off most of the time until I can get it locked down. Any help would be appreciated, even if it's just a couple of words I could google to understand what I'm doing wrong. Tortoise SVN does not allow access remotely, but it does within the LAN as well.

    Read the article

  • Returning a list from a function in Python

    - by Jasper
    Hi, I'm creating a game for my sister, and I want a function to return a list variable, so I can pass it to another variable. The relevant code is as follows: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" Then it is passed to another function that was imported from another module from potatohead import * ... welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) the code for the PotatoHead object is in the potatohead.py module which was imported above, and is as follows: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) However, when I run the program this error appears: Traceback (most recent call last): File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/main.py", line 158, in <module> myPotatoHead = PotatoHead(MCreatePH) File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/potatohead.py", line 15, in __init__ self.name = data[0] TypeError: 'NoneType' object is unsubscriptable What am i doing wrong? -----EDIT----- The program finishes as so: Step 7 of 7: Your PotatoHead will now be created... Creating variables... inputPHName inputPHFirstToy Then it goes to the Tracback -----EDIT2----- This is the EXACT code I'm running in its entirety: #+--------------------------------------+# #| main.py |# #| A main module for the Potato Head |# #| Game to pull the other modules |# #| together and control through user |# #| input |# #| Author: |# #| Date Created / Modified: |# #| 3/2/10 | 20/2/10 |# #+--------------------------------------+# Tested: No #Import the required modules: import time import random import sys from potatohead import * from toy import * #Start the Game: def welcomeMessage(): print "----- START NEW GAME -----------------------" print "==Print Welcome Message==" print "loading... \t loading... \t loading..." time.sleep(1) print "loading..." time.sleep(1) print "LOADED..." print; print; print; print """Hello, Welcome to the Potato Head Game. In this game you can create a Potato Head, and look after it, like a Virtual Pet. This game is constantly being updated and expanded. Please look out for updates. """ #Choose whether to start a new game or load a previously saved game: def startGame(): while 1: print "--------------------" print """ Choose an option: New_Game or Load_Game """ startGameInput = raw_input('>>> >') if startGameInput == 'New_Game': startNewGame() break elif startGameInput == 'Load_Game': print "This function is not yet supported" print "Try Again" print else: print "You must have mistyped the command: Type either 'New_Game' or 'Load_Game'" print #Set the new game up: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" #Run Program: welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) The potatohead.py module is as follows: #+--------------------------------------+# #| potatohead.py |# #| A module for the Potato Head Game |# #| Author: |# #| Date Created / Modified: |# #| 24/1/10 | 24/1/10 |# #+--------------------------------------+# Tested: Yes (24/1/10) #Create the PotatoHead class: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) #Define the phStats variable, enabling easy display of PotatoHead attributes: def phDefStats(self): self.phStats = """Your Potato Head's Stats are as follows: ---------------------------------------- Name: \t\t""" + self.name + """ Gender: \t\t""" + self.gender + """ Colour: \t\t""" + self.colour + """ Favourite Thing: \t""" + self.favouriteThing + """ First Toy: \t""" + self.firstToy + """ Age: \t\t""" + self.age + """ Education: \t""" + str(float(self.eduScience) + float(self.eduEnglish) + float(self.eduMaths)) + """ -> Science: \t""" + self.eduScience + """ -> English: \t""" + self.eduEnglish + """ -> Maths: \t""" + self.eduMaths + """ Fitness: \t""" + self.fitness + """ Happiness: \t""" + self.happiness + """ Health: \t""" + self.health + """ Hunger: \t""" + self.hunger + """ Tiredness: \t""" + self.tiredness + """ Toys: \t\t""" + str(self.toys) + """ Time: \t\t""" + self.time + """ """ #Change the PotatoHead's favourite thing: def phChangeFavouriteThing(self, newFavouriteThing): self.favouriteThing = newFavouriteThing phChangeFavouriteThingMsg = "Your Potato Head's favourite thing is " + self.favouriteThing + "." #"Feed" the Potato Head i.e. Reduce the 'self.hunger' attribute's value: def phFeed(self): if float(self.hunger) >=3.0: self.hunger = str(float(self.hunger) - 3.0) elif float(self.hunger) < 3.0: self.hunger = '0.0' self.time = str(int(self.time) + 1) #Pass time #"Exercise" the Potato Head if between the ages of 5 and 25: def phExercise(self): if float(self.age) < 5.1 or float(self.age) > 25.1: print "This Potato Head is either too young or too old for this activity!" else: if float(self.fitness) <= 8.0: self.fitness = str(float(self.fitness) + 2.0) elif float(self.fitness) > 8.0: self.fitness = '10.0' self.time = str(int(self.time) + 1) #Pass time #"Teach" the Potato Head: def phTeach(self, subject): if subject == 'Science': if float(self.eduScience) <= 9.0: self.eduScience = str(float(self.eduScience) + 1.0) elif float(self.eduScience) > 9.0 and float(self.eduScience) < 10.0: self.eduScience = '10.0' elif float(self.eduScience) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'English': if float(self.eduEnglish) <= 9.0: self.eduEnglish = str(float(self.eduEnglish) + 1.0) elif float(self.eduEnglish) > 9.0 and float(self.eduEnglish) < 10.0: self.eduEnglish = '10.0' elif float(self.eduEnglish) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'Maths': if float(self.eduMaths) <= 9.0: self.eduMaths = str(float(self.eduMaths) + 1.0) elif float(self.eduMaths) > 9.0 and float(self.eduMaths) < 10.0: self.eduMaths = '10.0' elif float(self.eduMaths) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" else: print "That subject is not an option..." print "Please choose either Science, English or Maths" self.time = str(int(self.time) + 1) #Pass time #Increase Health: def phGoToDoctor(self): self.health = '10.0' self.time = str(int(self.time) + 1) #Pass time #Sleep: Age, change stats: #(Time Passes) def phSleep(self): self.time = '0' #Resets time for next 'day' (can do more things next day) #Increase hunger: if float(self.hunger) <= 5.0: self.hunger = str(float(self.hunger) + 5.0) elif float(self.hunger) > 5.0: self.hunger = '10.0' #Lower Fitness: if float(self.fitness) >= 0.5: self.fitness = str(float(self.fitness) - 0.5) elif float(self.fitness) < 0.5: self.fitness = '0.0' #Lower Health: if float(self.health) >= 0.5: self.health = str(float(self.health) - 0.5) elif float(self.health) < 0.5: self.health = '0.0' #Lower Happiness: if float(self.happiness) >= 2.0: self.happiness = str(float(self.happiness) - 2.0) elif float(self.happiness) < 2.0: self.happiness = '0.0' #Increase the Potato Head's age: self.age = str(float(self.age) + 0.1) The game is still under development - There may be parts of modules that aren't complete, but I don't think they're causing the problem

    Read the article

  • Warning flagged by the 'rkhunter'

    - by gkt.pro
    when I scanned my Ubuntu 10.04 with rkhunter a root kit hunter toolkit, it gave following warning: Is there something that I have to worry about. [23:06:19] /usr/sbin/adduser [ Warning ] [23:06:19] Warning: The command '/usr/sbin/adduser' has been replaced by a script: /usr/sbin/adduser: a /usr/bin/perl script text executable [23:06:20] /usr/sbin/rsyslogd [ Warning ] [23:06:20] Warning: The file properties have changed: [23:06:22] /usr/bin/dpkg [ Warning ] [23:06:22] Warning: The file properties have changed: [23:06:22] /usr/bin/dpkg-query [ Warning ] [23:06:22] Warning: The file properties have changed: [23:06:24] /usr/bin/ldd [ Warning ] [23:06:24] Warning: The file properties have changed: [23:06:24] Warning: The command '/usr/bin/ldd' has been replaced by a script: /usr/bin/ldd: Bourne-Again shell script text executable [23:06:24] /usr/bin/logger [ Warning ] [23:06:24] Warning: The file properties have changed: [23:06:25] /usr/bin/mail [ Warning ] [23:06:25] Warning: The file '/usr/bin/mail' exists on the system, but it is not present in the rkhunter.dat file. [23:06:27] /usr/bin/sudo [ Warning ] [23:06:27] Warning: The file properties have changed: [23:06:29] /usr/bin/whereis [ Warning ] [23:06:29] Warning: The file properties have changed: [23:06:29] /usr/bin/lwp-request [ Warning ] [23:06:29] Warning: The command '/usr/bin/lwp-request' has been replaced by a script: /usr/bin/lwp-request: a /usr/bin/perl -w script text executable [23:06:29] /usr/bin/bsd-mailx [ Warning ] [23:06:29] Warning: The file '/usr/bin/bsd-mailx' exists on the system, but it is not present in the rkhunter.dat file. [23:06:30] /sbin/fsck [ Warning ] [23:06:30] Warning: The file properties have changed: [23:06:30] /sbin/ifdown [ Warning ] [23:06:30] Warning: The file properties have changed: [23:06:31] /sbin/ifup [ Warning ] [23:06:31] Warning: The file properties have changed: [23:06:34] /bin/dmesg [ Warning ] [23:06:34] Warning: The file properties have changed: [23:06:35] /bin/more [ Warning ] [23:06:35] Warning: The file properties have changed: [23:06:36] /bin/mount [ Warning ] [23:06:36] Warning: The file properties have changed: [23:06:37] /bin/which [ Warning ] [23:06:37] Warning: The command '/bin/which' has been replaced by a script: /bin/which: POSIX shell script text executable [23:08:58] Checking /dev for suspicious file types [ Warning ] [23:08:58] Warning: Suspicious file types found in /dev: [23:08:58] Checking for hidden files and directories [ Warning ] [23:08:58] Warning: Hidden directory found: /etc/.java [23:08:58] Warning: Hidden directory found: /dev/.udev [23:08:58] Warning: Hidden directory found: /dev/.initramfs [23:09:01] Checking version of Exim MTA [ Warning ] [23:09:01] Warning: Application 'exim', version '4.71', is out of date, and possibly a security risk. [23:09:01] Checking version of GnuPG [ Warning ] [23:09:01] Warning: Application 'gpg', version '1.4.10', is out of date, and possibly a security risk. [23:09:01] Checking version of OpenSSL [ Warning ] [23:09:01] Warning: Application 'openssl', version '0.9.8k', is out of date, and possibly a security risk.

    Read the article

  • C#/.NET: Process.HasExited returns true even though process is running??

    - by johnrl
    I have been observing that Process.HasExited sometimes returns true even though the process is still running. My code below starts a process with name "testprogram.exe" and then waits for it to exit. The problem is that sometimes I get thrown the exception; it seems that even though HasExited returns TRUE the process itself is still alive in the system - how can this be?? My program writes to a logfile just before it terminates and thus I need to be absolutely sure that this logfile exists (aka the process has terminated/finished) before reading it. Continuously checking for it's existence is not an option. // Create new process object process = new Process(); // Setup event handlers process.EnableRaisingEvents = true; process.OutputDataReceived += OutputDataReceivedEvent; process.ErrorDataReceived += ErrorDataReceivedEvent; process.Exited += ProgramExitedEvent; // Setup start info ProcessStartInfo psi = new ProcessStartInfo { FileName = ExePath, UseShellExecute = false, // Must be false to redirect IO RedirectStandardOutput = true, RedirectStandardError = true, Arguments = arguments }; process.StartInfo = psi; // Start the program process.Start(); while (!process.HasExited) Thread.Sleep( 500 ); Process[] p = Process.GetProcessesByName( "testprogram" ); if ( p.Length != 0 ) throw new Exception("Oh oh");

    Read the article

  • Unit testing Monorail's RenderText method

    - by MikeWyatt
    I'm doing some maintenance on an older web application written in Monorail v1.0.3. I want to unit test an action that uses RenderText(). How do I extract the content in my test? Reading from controller.Response.OutputStream doesn't work, since the response stream is either not setup properly in PrepareController(), or is closed in RenderText(). Example Action public DeleteFoo( int id ) { var success= false; var foo = Service.Get<Foo>( id ); if( foo != null && CurrentUser.IsInRole( "CanDeleteFoo" ) ) { Service.Delete<Foo>( id ); success = true; } CancelView(); RenderText( "{ success: " + success + " }" ); } Example Test (using Moq) [Test] public void DeleteFoo() { var controller = new FooController (); PrepareController ( controller ); var foo = new Foo { Id = 123 }; var mockService = new Mock < Service > (); mockService.Setup ( s => s.Get<Foo> ( foo.Id ) ).Returns ( foo ); controller.Service = mockService.Object; controller.DeleteTicket ( foo.Id ); mockService.Verify ( s => s.Delete<Foo> ( foo.Id ) ); Assert.AreEqual ( "{success:true}", GetResponse ( Response ) ); } // response.OutputStream.Seek throws an "System.ObjectDisposedException: Cannot access a closed Stream." exception private static string GetResponse( IResponse response ) { response.OutputStream.Seek ( 0, SeekOrigin.Begin ); var buffer = new byte[response.OutputStream.Length]; response.OutputStream.Read ( buffer, 0, buffer.Length ); return Encoding.ASCII.GetString ( buffer ); }

    Read the article

  • How to best transfer large payloads of data using wsHttp with WCF with message security

    - by jpierson
    I have a case where I need to transfer large amounts of serialized object graphs (via NetDataContractSerializer) using WCF using wsHttp. I'm using message security and would like to continue to do so. Using this setup I would like to transfer serialized object graph which can sometimes approach around 300MB or so but when I try to do so I've started seeing a exception of type System.InsufficientMemoryException appear. After a little research it appears that by default in WCF that a result to a service call is contained within a single message by default which contains the serialized data and this data is buffered by default on the server until the whole message is completely written. Thus the memory exception is being caused by the fact that the server is running out of memory resources that it is allowed to allocate because that buffer is full. The two main recommendations that I've come across are to use streaming or chunking to solve this problem however it is not clear to me what that involves and whether either solution is possible with my current setup (wsHttp/NetDataContractSerializer/Message Security). So far I understand that to use streaming message security would not work because message encryption and decryption need to work on the whole set of data and not a partial message. Chunking however sounds like it might be possible however it is not clear to me how it would be done with the other constraints that I've listed. If anybody could offer some guidance on what solutions are available and how to go about implementing it I would greatly appreciate it. Related resources: Chunking Channel How to: Enable Streaming Large attachments over WCF Custom Message Encoder Another spotting of InsufficientMemoryException I'm also interested in any type of compression that could be done on this data but it looks like I would probably be best off doing this at the transport level once I can transition into .NET 4.0 so that the client will automatically support the gzip headers if I understand this properly.

    Read the article

  • Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

    - by BenA
    I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

    Read the article

  • Codeigniter + TankAuth + Swfupload not able to get the logger user id

    - by Manny Calavera
    Hello. I am using Codeigniter with the TankAuth library installed and trying to upload to index.php/reuqests/doUpload from swfupload but can't access the page as authenticated. I have read many posts around the net about similar problem and tried to set $config['sess_match_useragent'] = FALSE; but still no difference. I have ended up skipping the login check in my controller for testing purposes. But now I need to access tankAuth library from my controller to get the current logged in user ID. It is requested in my application and cannot skip it, I really need to pass the logged in user id to that doUpload model. I have setup controller like this: function doUploadFileFn() { if (!$this->tank_auth->is_logged_in()) { return; } else { $user_id = $this->tank_auth->get_user_id(); $this->load->model('requests/doUploadFile'); $this->doUploadFile->uploadData($user_id); } } Now, it does not pass the is_logged_in() check, as I learned from other posts, CI deletes the session but I have setup the config not to match the user agent but still not working. Is there any solution to this out there ? Thank you.

    Read the article

  • Using the Salesforce PHP API to generate a User Profile Report

    - by Phill Pafford
    Hi All, Looking to do a security audit of all user permissions. I think I can use the Salesforce PHPToolkit 11 API to generate the report but new to Salesforce and a little confused on where to start. In Salesforce Setup Under: Administration Setup -> Manage Users -> Profiles -> Profile Names If you click on each user name you can see the permissions set and the actions the user is allowed to perform. Wanted a way to generate an excel report for all users with all the permissions for that user. Example: User Name | Can view Case | Can edit case | Can delete case | etc... phill yes no no x... and so on. I see that in Salesforce I can run a high level report on the Profile but I need to drill down for each user. Has anyone every done this type of reporting before? any help on this would be great. Thanks in advacne, --Phill

    Read the article

  • How to override ATTR_DEFAULT_IDENTIFIER_OPTIONS in Models in Doctrine?

    - by user309083
    Here someone explained that setting a 'primary' attribute for any row in your Model will override Doctrine_Manager's ATTR_DEFAULT_IDENTIFIER_OPTIONS attribute: http://stackoverflow.com/questions/2040675/how-do-you-override-a-constant-in-doctrines-models This works, however if you have a many to many relation whereby the intermediate table is created, even if you have set both columns in the intermediate to primary an error still results when Doctrine tries to place an index on the nonexistant 'id' column upon table creation. Here's my code: //Bootstrap // set the default primary key to be named 'id', integer, 4 bytes Doctrine_Manager::getInstance()->setAttribute( Doctrine_Core::ATTR_DEFAULT_IDENTIFIER_OPTIONS, array('name' => 'id', 'type' => 'integer', 'length' => 4)); //User Model class User extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('users'); } public function setUp() { $this->hasMany('Role as roles', array( 'local' => 'id', 'foreign' => 'user_id', 'refClass' => 'UserRole', 'onDelete' => 'CASCADE' )); } } //Role Model class Role extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('roles'); } public function setUp() { $this->hasMany('User as users', array( 'local' => 'id', 'foreign' => 'role_id', 'refClass' => 'UserRole' )); } } //UserRole Model class UserRole extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('roles_users'); $this->hasColumn('user_id', 'integer', 4, array('primary'=>true)); $this->hasColumn('role_id', 'integer', 4, array('primary'=>true)); } } Resulting error: SQLSTATE[42000]: Syntax error or access violation: 1072 Key column 'id' doesn't exist in table. Failing Query: "CREATE TABLE roles_users (user_id INT UNSIGNED NOT NULL, role_id INT UNSIGNED NOT NULL, INDEX id_idx (id), PRIMARY KEY(user_id, role_id)) ENGINE = INNODB". Failing Query: CREATE TABLE roles_users (user_id INT UNSIGNED NOT NULL, role_id INT UNSIGNED NOT NULL, INDEX id_idx (id), PRIMARY KEY(user_id, role_id)) ENGINE = INNODB I'm creating my tables using Doctrine::createTablesFromModels();

    Read the article

  • Selenium - Could not start Selenium session: Failed to start new browser session: Error while launching browser

    - by Yatendra Goel
    I am new to Selenium. I generated my first java selenium test case and it has compiled successfully. But when I run that test I got the following RuntimeException java.lang.RuntimeException: Could not start Selenium session: Failed to start new browser session: Error while launching browser at com.thoughtworks.selenium.DefaultSelenium.start <DefaultSelenium.java:88> Kindly tell me how can I fix this error. This is the java file I want to run. import com.thoughtworks.selenium.*; import java.util.regex.Pattern; import junit.framework.*; public class orkut extends SeleneseTestCase { public void setUp() throws Exception { setUp("https://www.google.com/", "*chrome"); } public void testOrkut() throws Exception { selenium.setTimeout("10000"); selenium.open("/accounts/ServiceLogin?service=orkut&hl=en-US&rm=false&continue=http%3A%2F%2Fwww.orkut.com%2FRedirLogin%3Fmsg%3D0&cd=IN&skipvpage=true&sendvemail=false"); selenium.type("Email", "username"); selenium.type("Passwd", "password"); selenium.click("signIn"); selenium.selectFrame("orkutFrame"); selenium.click("link=Communities"); selenium.waitForPageToLoad("10000"); } public static Test suite() { return new TestSuite(orkut.class); } public void tearDown(){ selenium.stop(); } public static void main(String args[]) { junit.textui.TestRunner.run(suite()); } } I first started the selenium server through the command prompt and then execute the above java file through another command prompt. Second Question: Can I do right click on a specified place on a webpage with selenium.

    Read the article

  • Using CakePHP with GoDaddy IIS 7 IIS7 and Microsoft URL Rewriter

    - by ricky
    Hi, I'm trying to move a CakePHP app from a Windows Apache setup to a GoDaddy shared IIS7 setup. It's been easy to migrate except for the Apache mod_rewrite part -- which obviously wouldn't work in IIS7. I basically have no url rewriting capability, which is crucial for Cake to work. GoDaddy now offers MS URL Rewriter, but they don't offer technical support for it. I haven't seen any blog post that discusses how to do this in detail. I'd really like to avoid third-party software, especially since GoDaddy provides MS URL Rewriter, which ought to be more than sufficient. The mod_rewrite directives that will allow Cake to work on GoDaddy look ridiculously easy (pasted below); can someone help me convert it to a web.config I can use with URL Rewriter? The URL Rewriter manual is really long and complicated. I'd rather not have to read the whole thing if I don't have to. Here's the contents of the apache .htaccess file: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ /index.php?url=$1 [QSA,L] </IfModule> Here's a link that discusses GoDaddy's limited support for URL Rewriter: http://stackoverflow.com/questions/416727/url-rewriting-under-iis-at-godaddy Many thanks! Rich

    Read the article

  • Question regarding the iPhone In App Purchase capabilities

    - by Wesley
    Hi everyone. I am working on releasing an app that will greatly benefit from using the in app purchase model. The app is a sort of book viewer, and the content I would like to make available for purchase will be more books in various languages. Each book is stored in sqlite format, in separate .db files. Now, the way that my developer has set it all up is that he added a line onto the bottom of the info.plist file called databases. Inside that database section, I can type in 'es' as the key, and for the value the name of the spanish database, and it populates in a uitableview in spanish, using NSLocale. So it is very easy to setup and implement different databases, which is great, but now I am confused about how I can implement my in app purchase model. Sorry about the long winded intro, here is my question: Is it possible to have an in app purchase add a line to my info.plist file? Or if not, is it possible to have the purchase reveal a new and updated plist file altogether that I would have already setup correctly? Any help here would be appreciated. Thanks

    Read the article

  • Memory leak when using Workflow 4.0 SqlWorkflowInstanceStore and PersistableIdleAction.Unload

    - by Rohland
    Hi, This particular problem is driving me nuts. I wonder if anyone has experienced a similar problem. If I load up a workflow then unload it and perform a memory snapshot then the result is predictable - my workflow is no longer in memory. However, if I load up a workflow and set the PersistableIdle action to PersistableIdleAction.Unload and let the workflow idle the workflow remains in memory even though the Unload action fires. I used ANTS Memory Profiler to debug this issue. This is the object retention graph outputted showing that an internal object is hanging onto my workflow instance. Can anyone else verify this problem? My code amounts to the following: Create SqlWorkflowInstanceStore and setup lock owner handle -- At this point I take a memory snapshot Create an instance of Workflow1 Set the PersistableIdle action Apply the instancestore to Workflow1 Setup action event handlers for Idle, Unload, UnhandledException etc. Persist the workflow instance Run the workflow instance Wait for instance to idle (caused by Delay activity) Ensure the Unload action is fired -- At this point I take a second memory snapshot From the above image, it is clear that the only object referencing Workflow1 is some internal event handlers result which I have no ability to dispose of. Any clues?

    Read the article

  • Can a masterpage reference another masterpage with the same content and contentplaceholder tags?

    - by Peach
    Current Setup I currently have three masterpages and content pages in the following hierarchy : One root-level masterpage that displays the final result. Call this "A" Two sibling pages that don't reference each other but contain all the same contentplaceholder elements, just in a different order with different <div>'s surrounding them. Both reference the root-level masterpage. Call these "B1" and "B2". Several content pages that reference one or the other sibling master pages above (not both). Call these "C1" through "C-whatever". Basically I have: Cn = B1 = A Cm = B2 = A This hierarchy works fine. Desired Setup What I want to do is add in a new level to this hierarchy (a new master page) between the content pages and the sibling masterpages. Basically so it's like this: One root-level masterpage that displays the final result. Two sibling pages plus a third sibling. Call it B3 A new middle masterpage that dynamically 'chooses' one of the sibling masterpages. The desired behaviour is to pass through the content given by C directly to Bn without modifying it. The only thing D actively does is choose which Bn. Call this new masterpage D. Several content pages that reference the new middle master page instead of the old siblings. The challenge to this is, I'm working within the confines of a rather complex product and I cannot change the original two sibling masterpages (B1 and B2) or content pages (C) in any meaningful way. I want: Cn = D = B1 = A Cm = D = B2 = A Ck = D = B3 = A Essentially, D should "pass through" all it's content to whichever B-level masterpage it chooses. I can't put this logic in the C-level pages. Additional Details All B-level pages have the same content/contentplaceholder tags, just ordered and styled differently. D can be as convoluted as it has to be, so long as it doesn't require modifying C or B. I'm using ASP.Net 2.0 Is this possible?

    Read the article

  • nMoq basic questions

    - by devoured elysium
    I made the following test for my class: var mock = new Mock<IRandomNumberGenerator>(); mock.Setup(framework => framework.Generate(0, 50)) .Returns(7.0) var rnac = new RandomNumberAverageCounter(mock.Object, 1, 100); rnac.Run(); double result = rnac.GetAverage(); Assert.AreEqual(result, 7.0, 0.1); The problem here was that I changed my mind about what range of values Generate(int min, int max) would use. I ran the test and it failed. I know that that is what it's supposed to happen but I was left wondering if isn't there a way to launch an exception or throw in a message when trying to run the method params. Also, if I want to run this Generate() method 10 times with different values (let's say, from 1 to 10), will I have to make 10 mock setups or something, or is there a special method for it? The best I could think of is this (which isn't bad, I'm just asking if there is other better way): for (int i = 1; i < 10; ++i) { mock.Setup(framework => framework.Generate(1, 100)) .Returns((double)i); } Thanks

    Read the article

  • Unable to install Perl Crypt::OpenSSL::RSA module, please help

    - by Willy
    Hi Everyone, I spent several hours but unable to install CPAN Crypt::OpenSSL::RSA module. It's required for Postfix's dkimproxy add-on. What I do is to run the following command in the shell: $ perl -MCPAN -e 'install Crypt::OpenSSL::RSA' When I run this command, several lines displayed and at the end, this is displayed: Checking if your kit is complete... Looks good Warning: prerequisite Crypt::OpenSSL::Random 0 not found. Writing Makefile for Crypt::OpenSSL::RSA ---- Unsatisfied dependencies detected during [I/IR/IROBERTS/Crypt-OpenSSL-RSA-0.26.tar.gz] ----- Crypt::OpenSSL::Random Shall I follow them and prepend them to the queue of modules we are processing right now? [yes] Then I hit enter (yes) and tens of lines generated with error. At the end I get this: ... ... RSA.xs:579: warning: implicit declaration of function ‘RSA_sign’ RSA.xs:579: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:579: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:579: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs: In function ‘XS_Crypt__OpenSSL__RSA_verify’: RSA.xs:605: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs:610: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:611: warning: implicit declaration of function ‘RSA_verify’ RSA.xs:611: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:613: error: ‘rsaData’ has no member named ‘hashMode’ RSA.xs:616: error: ‘rsaData’ has no member named ‘rsa’ RSA.xs:619: warning: implicit declaration of function ‘ERR_peek_error’ RSA.xs: In function ‘boot_Crypt__OpenSSL__RSA’: RSA.xs:214: warning: implicit declaration of function ‘ERR_load_crypto_strings’ make: *** [RSA.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible What am I doing wrong? Please guide me. Thanks.

    Read the article

  • Zend headScript() and appendFile not working as expected

    - by Ryan
    I'm having an issue trying to append a javascript file using headScript()->appendFile('file name') with Zend. I have my layout setup like this: <?= $this->headScript() ->prependScript( 'BASE_URL = "' . $this->baseUrl() . '";' ) ->appendFile( $this->baseUrl('js/lib/jquery/jquery-1.4.2.min.js') ) ->appendFile( $this->baseUrl('js/admin.js') ); ?> Then, in my controller I am trying to append an additional js file only for this page, like: $this->view->headScript()->appendFile( 'another/js/file.js' ); This file needs to be appended to what is already setup in the layout. However, this file gets added before the other 'appendFile' files. I've also tried $this->headScript()->offsetSetFile(999, '/js/myfuncs.js'); But this still adds the file before the other files. This is not how I would expect this to work, especially when using the offsetSetFile method. How can I add this file after the other files? Thanks.

    Read the article

  • Building a Drupal Newsletter Module for handling Newsletter Articles

    - by Michael T. Smith
    We're building a module for generating HTML for email newsletters. We've looked into using a few other modules (SimpleNews, MailChimp, among others), but due to various requirements, it'll be easier and better for us to build a custom solution. Being a new Drupal developer, I'm a bit worried about handling this in a "non-Drupal" way. That being said, my plan is to setup a vocabulary with Newsletters as a term and the actual Newsletters as sub-terms, like so: Newsletters (term) - Newsletter A (sub-term) - Newsletter B (sub-term) This has the added benefit of being able to organize where articles were published (besides just on the site.) The question, though, is how to handle the different Newsletter issues. I could go another level deeper in the vocabulary, like so: Newsletters (term) - Newsletter A (sub-term) - Issue - 2010-03-01 - Issue - 2010-03-02 - Newsletter B (sub-term) - Issue - 2010-03-01 - Issue - 2010-03-08 But I'm wondering if this is adding a bit too much complexity. Once I have this taxonomy setup, when the user went to add new newsletters it would also create a node (content type: newsletter), and when he/she went to add new issues, it would also create a node (content type: issue.) Those would then be the landing pages for that content. So, the question is is there a better way for handling this structure? Is this a Drupal-like solution?

    Read the article

  • Facebooker Causing Problems with Rails Integration Testing

    - by Eric Lubow
    I am (finally) attempting to write some integration tests for my application (because every deploy is getting scarier). Since testing is a horribly documented feature of Rails, this was the best I could get going with shoulda. class DeleteBusinessTest < ActionController::IntegrationTest context "log skydiver in and" do setup do @skydiver = Factory( :skydiver ) @skydiver_session = SkydiverSession.create(@skydiver) @biz = Factory( :business, :ownership = Factory(:ownership, :skydiver = @skydiver )) end context "delete business" do setup do @skydiver_session = SkydiverSession.find post '/businesses/destroy', :id = @biz.id end should_redirect_to('businesses_path()'){businesses_path()} end end end In theory, this test seems like it should pass. My factories seem like they are pushing the right data in: Factory.define :skydiver do |s| s.sequence(:login) { |n| "test#{n}" } s.sequence(:email) { |n| "test#{n}@example.com" } s.crypted_password '1805986f044ced38691118acfb26a6d6d49be0d0' s.password 'secret' s.password_confirmation { |u| u.password } s.salt 'aowgeUne1R4-F6FFC1ad' s.firstname 'Test' s.lastname 'Salt' s.nickname 'Mr. Password Testy' s.facebook_user_id '507743444' end The problem I am getting seems to be from Facebooker only seems to happen on login attempts. When the test runs, I am getting the error: The error occurred while evaluating nil.set_facebook_session. I believe that error is to be expected in a certain sense since I am not using Facebook here for this session. Can anyone provide any insight as to how to either get around this or at least help me out with what is going wrong?

    Read the article

  • Save UIwebview contents to photo gallery

    - by user307410
    There's a video tutorial on u tube that shows how to perform this.It consists of a UIwebview and toolbar button to save the contents.Haven't had any luck making this work.Could someone have a look and see they can make it work.Many thanks in advance. http://www.youtube.com/watch?v=gDPca3JIc_s&feature=player_embedded# /////////////////////////////////////////////////////////////////// // // SaveWebViewController.h // SaveWeb // // // Copyright MyCompanyName 2010. All rights reserved. // import @interface SaveWebViewController : UIViewController { IBOutlet UIWebView *webview; } @property (nonatomic, retain) IBOutlet UIWebView *webview; [IBAction]saveWeb:(id)sender; @end //////////////////////////////////////////////////////////////////////////////// // // SaveWebViewController.m // SaveWeb // // // Copyright MyCompanyName 2010. All rights reserved. // import "SaveWebViewController.h" @implementation SaveWebViewController (IBAction)saveWeb:(id)sender { UIGraphicsBeginImageContext(webView.frame.size); [self.view.layer renderInContext: UIGraphicsGetCurrentContext()]; UIImage *viewImage = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); UIImageWriteToSavedPhotosAlbum(viewImage, nil, nil, nil); } // The designated initializer. Override to perform setup that is required before the view is loaded. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } // Implement loadView to create a view hierarchy programmatically, without using a nib. - (void)loadView { } //Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; [webView loadRequest:[NSURLRequest requestWithURL:[NSURL URLWithString:@"http://google.com"]]]; } // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } (void)dealloc { [super dealloc]; } @end

    Read the article

  • Java plugin in the browser doesn't work even though it is enabled

    - by Pratyush Nalam
    I installed the Java Development Kit (64-bit) recently and saw it includes the JRE plugin for 64-bit as well. But, since Firefox is 32-bit, I also installed JRE 32-bit version. This is what is shown in Programs and Features. Now, the problem is, the other day, I opened a site which required the Java plugin. The frame showed the regular Java loading animation and hung. Nothing happened after that. Like this: I checked Firefox's plugins section and it shows Java is enabled, so no issue there I tried other browsers - IE10 and Chrome but to no avail. It doesn't work anywhere. I saw another question which said that you have to install 64-bit then 32-bit. That's what I actually did as well. First, installed JDK 7 64-bit (which includes JRE 7 64-bit) and then installed JRE 7 32-bit. I even tried the Java website's Do I have Java? section and over there too, it just keeps spinning for ages (I have waited for more than 10-20 seconds). How do I go about now? This never happened to me in Windows 7. I am on Windows 8 Pro.

    Read the article

  • Building new computer, turns on, but no post

    - by addybojangles
    Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

    Read the article

  • Custom Installer class , rollback method never called.

    - by yossi1981
    Hi guys. I am having an installer class , Here is a snippet: [RunInstaller(true)] public partial class ServerWrapInstaller : Installer { public override void Install(IDictionary stateSaver) { EventLog.WriteEntry("Installer", "Install", EventLogEntryType.Information); base.Install(stateSaver); } public override void Commit(IDictionary savedState) { EventLog.WriteEntry("Installer", "Commit", EventLogEntryType.Information); base.Commit(savedState); } public override void Rollback(IDictionary savedState) { EventLog.WriteEntry("Installer", "Rollback", EventLogEntryType.Information); base.Rollback(savedState); } public override void Uninstall(IDictionary savedState) { EventLog.WriteEntry("Installer", "UnInstall", EventLogEntryType.Information); base.Uninstall(savedState); } } Now i start the installation in full GUI mode and then click the "Cancel" button in the middle of the process causing the installation to roll back. The problem is that the RollBack method is not called. I don't see the expected entry in the event log. I want to mention that if i let the installation to complete , I do see the "Install" message in the event log and If i then uninstall , I see the "uninstall" message in the event log. But if stop the installtion process in the middle , by pressing the "cancel" button , I do see the progress bar going backward , but the rollback method is not called. what am I doing wrong ? thanks in advance for any help. Edit: Providing more details... The installer is an MSI package. The package is built in vs2009 using a setup project. The installer class is used as a custom action by the setup project. Since this is a MSI Package I have an option to run it in silent mode or in user-interactive more . When I wrote "Full GUI mode" , I ment User-Interactive mode.

    Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >