Search Results

Search found 5709 results on 229 pages for 'behind the scenes'.

Page 202/229 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

• Glassfish JSF/EAR Apache 2.2 proxy_ajp_mod Referred Content Missing (images/links/etc)

  - by BillR

  Full disclosure: Since this seems to be more of a configuration issue, I deleted this from Stack (where it wasn't getting any response) and reposted here. The problem is how to change the requestContextPath served up by Glassfish behind mod_proxy_ajp. The site/app runs fine if connecting directly to Glassfish port 8080 which is ultimately not what I want to do. So I need help with configuration for my servers and jsf deployment. I can see the issue but don't know how to resolve it. It has to do with the requestContextPath. Simply put, Apache directs to http://mysite.com/welcome.xhtml which is correct and what I want, but the page is minus the images and styles. The issue is Glassfish itself is still pointing to http://mysite.com/myapp/*. So all links it serves in the app/site still refer via the requestContextPath. That is the /myapp/* part of http://mysite.com/myapp/welcome.xhtml. When I look in the page source, images which are referred to with relative links still point to the requestContextPath (that is, /myapp/). This is fixable but a real pain. However with page links I can't set the relative path. If I hover over the contact page link I see http://mysite.com/myapp/contact.xhtml, and if I click it, I get 404. You can see the /myapp/ context path in the page source as well. If I type in the URL http://mysite.com/contact.xhtml I get the page minus its referred links (requestContextPath). On Apache ProxyPass / ajp://littlewalterserver:8009/myapp-web/ ProxyPassReverse / ajp://littlewalterserver:8009/myapp_Project-web On Glassfish asadmin create-network-listener --listenerport 8009 --protocol http-listener-1 --jkenabled true jk-connector I have tried going in to Glassfish and setting the web app as the default web app. I have changed the / in glassfish-web.xml (and checked to make sure it was the same in the EAR file). How can I get Glassfish to not include the /myapp/ context in the URLs? This has to be easy if you know how, but I don't know how, can someone help out here? Thanks.

  Read the article

• MySQL 5.5 - Lost connection to MySQL server during query

  - by bully

  I have an Ubuntu 12.04 LTS server running at a german hoster (virtualized system). # uname -a Linux ... 3.2.0-27-generic #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I want to migrate a Web CMS system, called Contao. It's not my first migration, but my first migration having connection issues with mysql. Migration went successfully, I have the same Contao version running (it's more or less just copy / paste). For the database behind, I did: apt-get install mysql-server phpmyadmin I set a root password and added a user for the CMS which has enough rights on its own database (and only its database) for doing the stuff it has to do. Data import via phpmyadmin worked just fine. I can access the backend of the CMS (which needs to deal with the database already). If I try to access the frontend now, I get the following error: Fatal error: Uncaught exception Exception with message Query error: Lost connection to MySQL server during query (<query statement here, nothing special, just a select>) thrown in /var/www/system/libraries/Database.php on line 686 (Keep in mind: I can access mysql with phpmyadmin and through the backend, working like a charme, it's just the frontend call causing errors). If I spam F5 in my browser I can sometimes even kill the mysql deamon. If I run # mysqld --log-warnings=2 I get this: ... 120921 7:57:31 [Note] mysqld: ready for connections. Version: '5.5.24-0ubuntu0.12.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 05:57:37 UTC - mysqld got signal 4 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346679 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f1485db3b20 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f1480041e60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f1483b96459] mysqld(handle_fatal_signal+0x483)[0x7f1483a5c1d3] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f1482797cb0] /lib/x86_64-linux-gnu/libm.so.6(+0x42e11)[0x7f14821cae11] mysqld(_ZN10SQL_SELECT17test_quick_selectEP3THD6BitmapILj64EEyyb+0x1368)[0x7f1483b26cb8] mysqld(+0x33116a)[0x7f148397916a] mysqld(_ZN4JOIN8optimizeEv+0x558)[0x7f148397d3e8] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0xdd)[0x7f148397fd7d] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f1483985d2c] mysqld(+0x2f4524)[0x7f148393c524] mysqld(_Z21mysql_execute_commandP3THD+0x293e)[0x7f14839451de] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f1483948bef] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1365)[0x7f148394a025] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f14839ec7cd] mysqld(handle_one_connection+0x50)[0x7f14839ec830] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f148278fe9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f1481eba4bd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f1464004b60): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED From /var/log/syslog: Sep 21 07:17:01 s16477249 CRON[23855]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Sep 21 07:18:51 s16477249 kernel: [231923.349159] type=1400 audit(1348204731.333:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=23946 comm="apparmor_parser" Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23990]: Upgrading MySQL tables if necessary. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysql' as: /usr/bin/mysql Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: This installation of MySQL is already upgraded to 5.5.24, use --force if you still need to run mysql_upgrade Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24004]: Checking for insecure root accounts. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24009]: Triggering myisam-recover for all MyISAM tables I'm using MyISAM tables all over, nothing with InnoDB there. Starting / stopping mysql is done via sudo service mysql start sudo service mysql stop After using google a little bit, I experimented a little bit with timeouts, correct socket path in the /etc/mysql/my.cnf file, but nothing helped. There are some old (from 2008) Gentoo bugs, where re-compiling just solved the problem. I already re-installed mysql via: sudo apt-get remove mysql-server mysql-common sudo apt-get autoremove sudo apt-get install mysql-server without any results. This is the first time I'm running into this problem, and I'm not very experienced with this kind of mysql 'administration'. So mainly, I want to know if anyone of you could help me out please :) Is it a mysql bug? Is something broken in the Ubuntu repositories? Is this one of those misterious 'use-tcp-connection-instead-of-socket-stuff-because-there-are-problems-on-virtualized-machines-with-sockets'-problem? Or am I completly on the wrong way and I just miss-configured something? Remember, phpmyadmin and access to the backend (which uses the database, too) is just fine. Maybe something with Apache? What can I do? Any help is appreciated, so thanks in advance :)

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 3

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 2 Adding the ReportViewer control and filter drop downs. Open the source code for index.aspx and add a ScriptManager control. This control is required for the ReportViewer control. Add a DropDownList for the categories and suppliers. Add the ReportViewer control. The markup after these steps is shown below. <div> <asp:ScriptManager ID="smScriptManager" runat="server"> </asp:ScriptManager> <div id="searchFilter"> Filter by: Category : <asp:DropDownList ID="ddlCategories" runat="server" /> and Supplier : <asp:DropDownList ID="ddlSuppliers" runat="server" /> </div> <rsweb:ReportViewer ID="rvProducts" runat="server"> </rsweb:ReportViewer> </div> The design view for index.aspx is shown below. The dropdowns will display the categories and suppliers in the database. Changing the selection in the drop downs will cause the report to be filtered by the selections in the dropdowns. You will see how to do this in the next steps.   Attaching the RDLC to the ReportViewer control by clicking on the top right of the control, going to Report Viewer tasks and selecting Products.rdlc.   Resize the ReportViewer control by dragging at the bottom right corner. I set mine to 800px x 500px. You can also set this value in source view. Defining the data sources. We will now define the Data Source used to populate the report. Go back to the “ReportViewer Tasks” and select “Choose Data Sources” Select a “New data source..” Select “Object” and name your Data Source ID “odsProducts”   In the next screen, choose “ProductRepository” as your business object. Choose “GetProductsProjected” in the next screen.   The method requires a SupplierID and CategoryID. We will set these so that our data source gets the values from the drop down lists we defined earlier. Set the parameter source to be of type “Control” and set the ControlIDs to be ddlSuppliers and ddlCategories respectively. Your screen will look like this: We are now going to define the data source for our drop downs. Select the ddlCategory drop down and pick “Choose Data Source”. Pick “Object” and give it an id “odsCategories”   In the next screen, choose “ProductRepository” Select the GetCategories() method in the next screen.   Select “CategoryName” and “CategoryID” in the next screen. We are done defining the data source for the Category drop down. Perform the same steps for the Suppliers drop down.   Select each dropdown and set the AppendDataBoundItems to true and AutoPostback to true.     The AppendDataBoundItems is needed because we are going to insert an “All“ list item with a value of empty. Go to each drop down and add this list item markup as shown below> Finally, double click on each drop down in the designer and add the following code in the code behind. This along with the “Autopostback= true” attribute refreshes the report anytime a drop down is changed. protected void ddlCategories_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); }   protected void ddlSuppliers_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); } Compile your report and run the page. You should see the report rendered. Note that the tool bar in the ReportViewer control gives you a couple of options including the ability to export the data to Excel, PDF or word.   Conclusion Through this three part series, we did the following: Created a data layer for use by our RDLC. Created an RDLC using the report wizard and define a dataset for the report. Used the report design surface to design our report including adding a chart. Used the ReportViewer control to attach the RDLC. Connected our ReportWiewer to a data source and take parameter values from the drop downlists. Used AutoPostBack to refresh the reports when the dropdown selection was changed. RDLCs allow you to create interactive reports including drill downs and grouping. For even more advanced reports you can use Microsoft® SQL Server™ Reporting Services with RDLs. With RDLs, the report is rendered on the report server instead of the web server. Another nice thing about RDLs is that you can define a parameter list for the report and it gets rendered automatically for you. RDLCs and RDLs both have their advantages and its best to compare them and choose the right one for your requirements. Download VS2010 RTM Sample project NorthwindReports.zip   Alfred Borden: Are you watching closely?

  Read the article

• [Windows 8] Update TextBox’s binding on TextChanged

  - by Benjamin Roux

  Since UpdateSourceTrigger is not available in WinRT we cannot update the text’s binding of a TextBox at will (or at least not easily) especially when using MVVM (I surely don’t want to write behind-code to do that in each of my apps !). Since this kind of demand is frequent (for example to disable of button if the TextBox is empty) I decided to create some attached properties to to simulate this missing behavior. namespace Indeed.Controls { public static class TextBoxEx { public static string GetRealTimeText(TextBox obj) { return (string)obj.GetValue(RealTimeTextProperty); } public static void SetRealTimeText(TextBox obj, string value) { obj.SetValue(RealTimeTextProperty, value); } public static readonly DependencyProperty RealTimeTextProperty = DependencyProperty.RegisterAttached("RealTimeText", typeof(string), typeof(TextBoxEx), null); public static bool GetIsAutoUpdate(TextBox obj) { return (bool)obj.GetValue(IsAutoUpdateProperty); } public static void SetIsAutoUpdate(TextBox obj, bool value) { obj.SetValue(IsAutoUpdateProperty, value); } public static readonly DependencyProperty IsAutoUpdateProperty = DependencyProperty.RegisterAttached("IsAutoUpdate", typeof(bool), typeof(TextBoxEx), new PropertyMetadata(false, OnIsAutoUpdateChanged)); private static void OnIsAutoUpdateChanged(DependencyObject sender, DependencyPropertyChangedEventArgs e) { var value = (bool)e.NewValue; var textbox = (TextBox)sender; if (value) { Observable.FromEventPattern<TextChangedEventHandler, TextChangedEventArgs>( o => textbox.TextChanged += o, o => textbox.TextChanged -= o) .Do(_ => textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text)) .Subscribe(); } } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is composed of two attached properties. The first one “RealTimeText” reflects the text in real time (updated after each TextChanged event). The second one is only used to enable the functionality. To subscribe to the TextChanged event I used Reactive Extensions (Rx-Metro package in Nuget). If you’re not familiar with this framework just replace the code with a simple: textbox.TextChanged += textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use these attached properties, it’s fairly simple <TextBox Text="{Binding Path=MyProperty, Mode=TwoWay}" ic:TextBoxEx.IsAutoUpdate="True" ic:TextBoxEx.RealTimeText="{Binding Path=MyProperty, Mode=TwoWay}" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Just make sure to create a binding (in TwoWay) for both Text and RealTimeText. Hope this helps !

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• Interview with Tomas Ulin at the MySQL Innovation Day

  - by Monica Kumar

  MySQL Innovation Day held on June 5, 2012 was a great event for the MySQL engineers, users and customers to gather, share and network. I was able to get a few minutes with Tomas Ulin, Vice President of MySQL Engineering at Oracle, to ask him some questions. Here are the highlights of my interview with Tomas. Monica: This was the first MySQL Innovation Day, correct?  Why now, what was the strategy behind hosting this kind of event? Tomas: In the last year, we have rolled out an incredible number of MySQL events worldwide – some targeted at developers that are new to MySQL and others for the MySQL savvy. At the MySQL Innovation Day, our first event of this kind,, we had a number of our key engineers presenting lightning talks delivering previews of key new features as well as discussing roadmap. Our goal is to keep an open dialogue with the MySQL community. In fact, we are hosting a two-day conference, another first, for the MySQL community called MySQL Connect on Sept. 29-30 in San Francisco. If you attended the MySQL Innovation Day and liked what we did, you are going to love MySQL Connect. We’ll have a lot more of our engineers and many users and community members presenting hour long sessions and hands on labs. Our engineers will be presenting new MySQL features as well offer previews of upcoming enhancements. Monica: What's the big take-away from today's MySQL Innovation Day? Tomas: I hope the most important takeaway for attendees was to see that Oracle has been driving, and continues to drive MySQL innovation with a steady stream of new great GA and Development Milestone releases. Monica: What were attendees most interested in? What feedback did they have? Tomas: Feedback from attendees was incredibly positive and encouraging. In particular, they liked the interaction with the MySQL engineers and were also excited about the new early access features in MySQL 5.6 and MySQL Cluster 7.3. In addition, sessions delivered by MySQL users like Facebook, Pinterest and Twitter were very well received. For example, Pinterest talked about using MySQL to scale from 0 to billions of page views/month, Twitter talked about “Scaling twitter with MySQL” and Facebook discussed the many options to implement MySQL master failover solutions. The presentations are already available for download while some of the session videos will be made available on the MySQL Innovation Day web page shortly. Monica: How would you distinguish the use of MySQL vs. Oracle Database? What key factors should customers consider? Tomas: MySQL and Oracle Database complement each other. They are very different products, best suited to different use cases. Customers can choose world-class solutions from Oracle to fulfill a variety of needs. MySQL is a great choice for enterprise web-based, custom and embedded apps. Oracle Database is the leading choice for enterprise packaged applications such as ERP, CRM as well as high-end data warehousing and business intelligence applications. Monica: What are the highlights of the current MySQL 5.6 Development Milestone Release and early access features for MySQL Cluster 7.3? Tomas: MySQL 5.6 development milestone release builds on MySQL 5.5 by improving: Optimizer for better Performance, Scalability Performance Schema for better instrumentation InnoDB for better transactional throughput Replication for higher availability, data integrity NoSQL options for more flexibility We announced some new early access features in MySQL 5.6, including binary log group commit. We also announced early access features in MySQL Cluster 7.3 including support for foreign key constraints. Monica: How do people get these releases? Tomas: You can access development milestone releases by going to: http://dev.mysql.com/downloads/mysqlThen select the “Development Release” tab. The MySQL Cluster 7.3 and other early access features can be downloaded at: http://labs.mysql.com Monica: What's coming up next for MySQL? Tomas: Our development team is working in overdrive, cranking out new features with community feedback. Don’t miss the MySQL Connect conference being held in San Francisco on Sept. 29 and 30th. My team and I will be there. I hope you can join us! Monica: Thank you for your time, Tomas. I look forward to seeing you at the MySQL Connect conference. To our followers, I hope you found this interview informative. I welcome your comments. Please stay tuned here for more updates on MySQL. Note: Monica Kumar is Senior Director of product marketing for Linux, Virtualization and MySQL at Oracle.

  Read the article

• CodePlex Daily Summary for Monday, December 06, 2010

  CodePlex Daily Summary for Monday, December 06, 2010Popular ReleasesAura: Aura Preview 1: Rewritten from scratch. This release supports getting color only from icon of foreground window.myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...SubtitleTools: SubtitleTools 1.0: First public releaseMiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.5 beta Released: Hi, Today we are releasing Visifire 3.6.5 beta with the following new feature: New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. Also this release includes few bug fixes: AxisXLabel label were getting clipped if angle was set for AxisLabels and ScrollingEnabled was not set in Chart. If LabelStyle property was set as 'Inside', size of the Pie was not proper. Yo...EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...AI: Initial 0.0.1: It’s simply just one code file; it simulates AI and machine in a simulated world. The AI has a little understanding of its body machine and parts, and able to use its feet to do actions just start and stop walking. The world is all of white with nothing but just the machine on a white planet. Colors, odors and position information make no sense. I’m previous C# programmer and I’m learning F# during this project, although I’m still not a good F# programmer, in this project I learning to prog...NKinect: NKinect Preview: Build features: Accelerometer reading Motor serial number property Realtime image update Realtime depth calculation Export to PLY (On demand) Control motor LED Control Kinect tiltMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.New ProjectsAboutTime: The AboutTime WPF controls project is aimed at developing custom controls that relate to time.aReader: aReader is a free software, it's used as an XPS document reader. It's developed in C# Language and use Windows Presentation Foundation technology with .NET Framework 3.5. Mixed with Ribbon Controls Library for GUI (Graphic User Interface) make this application user friendly.Battle Net Info: Battle Net Info provides information of the StarCraft2 player from his profile pageBencoder: Library for encode/decode bencode file or string. It's developing on C#.BiBongNet: BiBongNet Project.Binhnt: BinhntC++ Bloom Filter Library: C++ Bloom Filter LibraryChild Sponsorship Manager: Sponsorship Manager is developed for a NPO that provides child sponsorship in developing countries. It is possible to track sponsor child relations, gifts and payments. It is developed in visual basic . netDocBlogger: This is a tool for automatically converting existing XML comments from your project into MSDN style HTML for posting to the codeplex site. This will use the MetaBlog API to post code, but can be used in a copy paste fashion right away.Dynamic Rdlc WebControl: "Dynamic Rdlc WebControl" is an ASP .NET WebControl to generate dynamic reports in RDLC format without generate physical files. Suports groups and totalizers. It is developed with Microsoft Visual Studio 2010, ASP .NET and C# 4.Fake Call for Windows Phone 7: Coding4Fun Windows Phone 7 fake call applicationFlow launcher: Flow is the worlds fastest application launcher, using an onscreen keyboard and mnemonics to achieve lightning fast shortcut launching.GaDotNet: GaDotNet is an open source library designed to make it easy to log page views, events and transactions, through c# code, without using JavaScript or even needing to have a browser.HackerNews for WP7: HackerNews is a WP7 client for the HackerNews website.How much is this meeting costing us?: Coding4Fun Windows Phone 7 "How much is this meeting costing us?" applicationKLAB: KLABMap Navigator: Map Navigator - it's a silverlight application intended to work with maps.MNRT: MNRT implements (demonstrates) several techniques to realize fast global illumination for dynamic scenes on Graphics Processing Units (GPUs) using CUDA. A GPU-based kd-tree was implemented to accelerate both ray tracing and photon mapping.MVC Helpers: MVC Helper makes developing views easier. It contains extended helpers classes to render view content. It is developed in C#.Net Extended Helpers for Grid has been created so far. MVCPets: This is a projected dedicated to providing a free platform to be used by animal rescue organizations. The hope is that this project can fill the void for those rescue groups that can't afford to pay a professional web designer/developer.MyGraphicProgram: ???????????????NAI: This project is a step by step illustration of some Numerical Analysis methods.Nemono: Nemono is an application that runs in the background, and is activated by pressing a key combination like ALT+W. When activated, Nemono uses context awareness to present relevant shortcuts to the user, and mnemonics to execute shortcuts.opojo: opojoOxyPlot: OxyPlot is a .NET library for making XY line plots. The focus is on simplicity and performance. The library contains custom controls for WPF and Windows Forms. The plots can also be exported to SVG, PDF and PNG.PowerChumby: PowerChumby is a Perl CGI script and a PowerShell module that gives you a PowerShell way of controlling your Chumby.RHoK Berlin Visio Projekt: Random Hacks of Kindness - Berlin Projekt für die Senatsverwaltung für Gesundheit, Umwelt und Verbraucherschutz Query, integrate and display external data in Microsoft Visio. It's developed in C#.sc2md: starcraft.md news portalSlide Show: Coding4Fun Windows Phone 7 Slide Show applicationsmartcon: smart control centerTFS Fav source: Favourites for source location in VSTwitter Followers Monitor: Free and Open Source tool that will let you monitor any Twitter account for its new & lost followers even if it's not yours and you don't have its credentials. It allows you to add several Twitter accounts and be updated right from your desktop.

  Read the article

• Surface development: it&rsquo;s just like software development

  - by Dennis Vroegop

  Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

  Read the article

• Last week I was presented with a Microsoft MVP award in Virtual Machines – time to thank all who hel

  - by Liam Westley

  MVP in Virtual Machines Last week, on 1st April, I received an e-mail from Microsoft letting me know that I had been presented with a 2010 Microsoft® MVP Award for outstanding contributions in Virtual Machine technical communities during the past year.   It was an honour to be nominated, and is a great reflection on the vibrancy of the UK user group community which made this possible. Virtualisation for developers, not just IT Pros I consider it a special honour as my expertise in virtualisation is as a software developer utilising virtual machines to aid my software development, rather than an IT Pro who manages data centre and network infrastructure.  I’ve been on a minor mission over the past few years to enthuse developers in a topic usually seen as only for network admins, but which can make their life a whole lot easier once understood properly. Continuous learning is fun In 1676, the scientist Isaac Newton, in a letter to Robert Hooke used the phrase (http://www.phrases.org.uk/meanings/268025.html) ‘If I have seen a little further it is by standing on the shoulders of Giants’ I’m a nuclear physicist by education, so I am more than comfortable that any knowledge I have is based on the work of others.  Although far from a science, software development and IT is equally built upon the work of others. It’s one of the reasons I despise software patents. So in that sense this MVP award is a result of all the great minds that have provided virtualisation solutions for me to talk about.  I hope that I have always acknowledged those whose work I have used when blogging or giving presentations, and that I have executed my responsibility to share any knowledge gained as widely as possible. Thanks to all those who helped – a big thanks to the UK user group community I reckon this journey started in 2003 when I started attending a user group called the London .Net Users Group (http://www.dnug.org.uk) started by a nice chap called Ian Cooper. The great thing about Ian was that he always encouraged non professional speakers to take the stage at the user group, and my first ever presentation was on 30th September 2003; SQL Server CE 2.0 and the.NET Compact Framework. In 2005 Ian Cooper was on the committee for the first DeveloperDeveloperDeveloper! day, the free community conference held at Microsoft’s UK HQ in Thames Valley park in Reading.  He encouraged me to take part and so on 14th May 2005 I presented a talk previously given to the London .Net User Group on Simplifying access to multiple DB providers in .NET.  From that point on I definitely had the bug; presenting at DDD2, DDD3, groking at DDD4 and SQLBits I and after a break, DDD7, DDD Scotland and DDD8.  What definitely made me keen was the encouragement and infectious enthusiasm of some of the other DDD organisers; Craig Murphy, Barry Dorrans, Phil Winstanley and Colin Mackay. During the first few DDD events I met the Dave McMahon and Richard Costall from NxtGenUG who made it easy to start presenting at their user groups.  Along the way I’ve met a load of great user group organisers; Guy Smith-Ferrier of the .Net Developer Network, Jimmy Skowronski of GL.Net and the double act of Ray Booysen and Gavin Osborn behind what was Vista Squad and is now Edge UG. Final thanks to those who suggested virtualisation as a topic ... Final thanks have to go the people who inspired me to create my Virtualisation for Developers talk.  Toby Henderson (@holytshirt) ensured I took notice of Sun’s VirtualBox, Peter Ibbotson for being a fine sounding board at the Kew Railway over quite a few Adnam’s Broadside and to Guy Smith-Ferrier for allowing his user group to be the guinea pigs for the talk before it was seen at DDD7.  Thanks to all of you I now know much more about virtualisation than I would have thought possible and it continues to be great fun. Conclusion If this was an academy award acceptance speech I would have been cut off after the first few paragraphs, so well done if you made it this far.  I’ll be doing my best to do justice to the MVP award and the UK community.  I’m fortunate in having a new employer who considers presenting at user groups as a good thing, so don’t expect me to stop any time soon. If you’ve never seen me in action, then you can view the original DDD7 Virtualisation for Developers presentation (filmed by the Microsoft Channel 9 team) as part of the full DDD7 video list here, http://www.craigmurphy.com/blog/?p=1591.  Also thanks to Craig Murphy’s fine video work you can also view my latest DDD8 presentation on Commercial Software Development, here, http://vimeo.com/9216563 P.S. If I’ve missed anyone out, do feel free to lambast me in comments, it’s your duty.

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• To ORM or Not to ORM. That is the question&hellip;

  - by Patrick Liekhus

  UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

  Read the article

• Microsoft, jQuery, and Templating

  - by Stephen Walther

  About two months ago, John Resig and I met at Café Algiers in Harvard square to discuss how Microsoft can contribute to the jQuery project. Today, Scott Guthrie announced in his second-day MIX keynote that Microsoft is throwing its weight behind jQuery and making it the primary way to develop client-side Ajax applications using Microsoft technologies. What does this announcement mean? It means that Microsoft is shifting its resources to invest in jQuery. Developers on the ASP.NET team are now working full-time to contribute features to the core jQuery library. Furthermore, we are working with other teams at Microsoft to ensure that our technologies work great with jQuery. We are contributing to the open-source jQuery project in the exact same way that any other company or individual from the community can contribute to jQuery. We are writing proposals, submitting the proposals to the jQuery forums, and revising the proposals in response to community feedback. The jQuery team can decide to reject or accept any feature that we propose. Any feature that Microsoft contributes to jQuery will be platform neutral. In other words, Microsoft contributions will benefit PHP and RAILS developers just as much as they benefit ASP.NET developers. Microsoft contributions to jQuery will improve the web for everyone. Contributing Support for Templates to jQuery Core Our first proposal concerns templating. We want to contribute support for templates to jQuery so that JavaScript developers can use jQuery to easily display a set of database records. You can read our templating proposal here: http://wiki.github.com/nje/jquery/jquery-templates-proposal You can download and play with our prototype for templating here: http://github.com/nje/jquery-tmpl The following code illustrates how you can use a template to display a set of products in a bulleted list: <script type="text/javascript"> jQuery(function(){ var products = [ { name: "Product 1", price: 12.99}, { name: "Product 2", price: 9.99}, { name: "Product 3", price: 35.59} ]; $("ul").append("#template", products); }); </script> <script id="template" type="text/html"> <li>{%= name %} - {%= price %}</li> </script> <ul></ul> The template is contained in a SCRIPT element that has a TYPE=”text/html” attribute. Browsers ignore the contents of a SCRIPT element when they don’t understand the content type. Notice that the placeholder {%=...%} is used within the template to indicate where the name and price of a product should appear. The delimiters {%=…%} are used for expressions and the delimiters {%...%} are used for code. Finally, the products are rendered using the template with the call to $(“ul”).append(“#template”, products). The standard jQuery DOM manipulation methods have been modified to support templates. When the page above is rendered, you get the bulleted list displayed in the following figure. Our goal is to keep our proposal for templates as simple as possible. After support for templating has been added to jQuery, plug-in authors can take advantage of templating when building complex data-driven plug-ins such as a DataGrid plug-in. The Ajax Control Toolkit Over 100,000 developers download the Ajax Control Toolkit every month. That’s a mind-boggling number of downloads. We realize that the Ajax Control Toolkit is extremely popular among ASP.NET Web Forms developers and we want to continue to invest in the Ajax Control Toolkit. If you are adding JavaScript interactivity to an ASP.NET Web Forms application, and you don’t want to write JavaScript, then we recommend that you use the server controls in the Ajax Control Toolkit. Using the Ajax Control Toolkit does not require knowledge of JavaScript and the toolkit enables you to build applications with the concepts familiar to ASP.NET Web Forms applications developers. If, however, you are interested in creating client-side interactivity without server controls then we recommend that you use jQuery. We plan to continue to release new versions of the Ajax Control Toolkit every few months. Our goal is to continue to improve the quality of the Ajax Control Toolkit and to make it easier for the community to contribute code, bug fixes, and documentation. The ASP.NET Ajax Library We are moving the ASP.NET Ajax Library into the Ajax Control Toolkit. If you currently use ASP.NET Ajax Library client templates, client data-binding, or the client script loader then you can continue to use these features by downloading the Ajax Control Toolkit. Be aware that our focus with the Ajax Control Toolkit is server-side Ajax.  For client-side Ajax, we are shifting our focus to jQuery. For example, if you have been using ASP.NET Ajax Library client templates then we recommend that you shift to using jQuery instead. Conclusion Our plan is to focus on jQuery as the primary technology for building client-side Ajax applications moving forward. We want to adapt Microsoft technologies to work great with jQuery and we want to contribute features to jQuery that will make the web better for everyone. We are very excited to be working with the jQuery core team.

  Read the article

• The Winds of Change are a Blowin&rsquo;

  - by Ajarn Mark Caldwell

  For six years I have been an avid and outspoken fan and paying customer of SourceGear products…from Vault to Dragnet to Fortress and on to Vault Professional, but that is all changing now.  Not the fan part, but the paying customer part.  I’m still a huge fan.  I think that SourceGear does a great job with their product and support has been fantastic when needed (which is not very often).  I think that Eric Sink has done a fine job building a quality company and products, and I appreciate his contributions to the tech community through this blogging and books.  I still think their products are high quality and do a fantastic job of what they do.  But there’s the rub…what they do is no longer enough for me. As I have rebuilt our development team over the last couple of years, and we have begun to investigate Scrum and Kanban, I realize that I need more visibility into the progress of the team.  I need better project management tools, and this is where Vault Professional lags behind several other tools.  Granted, in the latest release (Vault 6.0) they added a nice time tracking feature, but I want more.  (Note, I did contact SourceGear about my quest for more, but apparently, the rest of their customer base has not been clamoring for this and so they have not built it.  Granted, I wasn’t clamoring for it either until just recently, but unfortunately for SourceGear, I want it now and don’t want to wait for them to build it into their system.) Ironically, it was SourceGear themselves who started to turn me on to the possibilities of other tools.  They built a limited integration with Axosoft OnTime which I read about several times on their support site (I used to regularly read and occasionally comment on their Support Forum).  I decided to check out OnTime and was very impressed with the tool for work item tracking and project management (not to mention their great Scrum Master in 10 Minutes video).  I fell in love with the capabilities of OnTime.  Unfortunately, the integration with Vault for source control management was, as I mentioned, limited.  I could have forfeited the integration between work items and source code, but there is too much benefit to linking check-ins to work items for me to give that up.  So then I did what was previously unthinkable for me, I considered switching not just the work tracking tool, but also the source code management tool.  This was really stepping outside my comfort zone because source code is Gold, and not to be trifled with.  When you find a good weapon to protect your gold, stick with it. I looked at Git and Tortoise SVN, but the integration methods for those was pretty rough compared to what I was used to.  The recommended tool from Axosoft’s point of view appeared to be RocketSVN, but I really wasn’t sure I wanted to go the “flavor of Subversion” route.  Then I started thinking about that other tool I liked back when I first chose to go with Vault, but couldn’t afford:  Team Foundation Server.  And what do you know…Microsoft has not only radically improved it over that version from back in 2006, but they also came to their senses about how it should be licensed, and it is much more affordable now.  So I started looking into the latest capabilities in the 2012 version, and I fell in love all over again. I really went deep on checking out the tools.  I watched numerous webcasts from Microsoft partners, went to a beta preview on Microsoft’s campus, and watched a lot of Channel 9 videos on the new ALM features (oooh…shiny).  Frankly, I was very impressed with the capabilities of the newest version, and figured this was probably our direction.  As an interesting twist of fate, one of my employees crossed paths with an ALM Consultant from Northwest Cadence, a local Microsoft Partner, and one of the companies that produced several of the webcasts that I had been watching.  So I gave Bryon a call and started grilling him to see if he really knew anything or was just another guy who couldn’t find a job so he called himself a consultant.  It turns out Bryon actually knows a lot, especially in an area that was becoming a frustration point for us: Branching strategies and automated builds (that’s probably a whole separate blog entry).  As we talked, Bryon suggested we look into doing a DTDPS (Developer Tools Deployment Planning Services) session with his company.  This is a service that can be paid for by Microsoft Enterprise Agreement planning services credits or SA training benefits, and, again, coincidentally, we had several that were just about to expire, so I put them to good use. The DTDPS sessions were great; and Bryon, Rick, and the rest of the folks at Northwest Cadence have been a pleasure to work with.  We have just purchased a new server for our TFS rollout and are planning the steps and options right now.  This is still a big project ahead of us to not only install and configure TFS, but also to load all of our source code (many different systems, not just one program) and transition to the new way of life with TFS, but I am convinced that it is the right move for my team at this point in time.  We need the new capabilities that are in alignment with Scrum and Kanban methodologies in order to more efficiently manage all the different projects that we have going on at one time. I would still wholeheartedly endorse SourceGear’s products and Axosoft’s OnTime for those whose needs are met by those tools, but for me and my team, I think that TFS is the right fit, and I am looking forward to the change.

  Read the article

• Parallelism in .NET – Part 8, PLINQ’s ForAll Method

  - by Reed

  Parallel LINQ extends LINQ to Objects, and is typically very similar.  However, as I previously discussed, there are some differences.  Although the standard way to handle simple Data Parellelism is via Parallel.ForEach, it’s possible to do the same thing via PLINQ. PLINQ adds a new method unavailable in standard LINQ which provides new functionality… LINQ is designed to provide a much simpler way of handling querying, including filtering, ordering, grouping, and many other benefits.  Reading the description in LINQ to Objects on MSDN, it becomes clear that the thinking behind LINQ deals with retrieval of data.  LINQ works by adding a functional programming style on top of .NET, allowing us to express filters in terms of predicate functions, for example. PLINQ is, generally, very similar.  Typically, when using PLINQ, we write declarative statements to filter a dataset or perform an aggregation.  However, PLINQ adds one new method, which provides a very different purpose: ForAll. The ForAll method is defined on ParallelEnumerable, and will work upon any ParallelQuery<T>.  Unlike the sequence operators in LINQ and PLINQ, ForAll is intended to cause side effects.  It does not filter a collection, but rather invokes an action on each element of the collection. At first glance, this seems like a bad idea.  For example, Eric Lippert clearly explained two philosophical objections to providing an IEnumerable<T>.ForEach extension method, one of which still applies when parallelized.  The sole purpose of this method is to cause side effects, and as such, I agree that the ForAll method “violates the functional programming principles that all the other sequence operators are based upon”, in exactly the same manner an IEnumerable<T>.ForEach extension method would violate these principles.  Eric Lippert’s second reason for disliking a ForEach extension method does not necessarily apply to ForAll – replacing ForAll with a call to Parallel.ForEach has the same closure semantics, so there is no loss there. Although ForAll may have philosophical issues, there is a pragmatic reason to include this method.  Without ForAll, we would take a fairly serious performance hit in many situations.  Often, we need to perform some filtering or grouping, then perform an action using the results of our filter.  Using a standard foreach statement to perform our action would avoid this philosophical issue: // Filter our collection var filteredItems = collection.AsParallel().Where( i => i.SomePredicate() ); // Now perform an action foreach (var item in filteredItems) { // These will now run serially item.DoSomething(); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This would cause a loss in performance, since we lose any parallelism in place, and cause all of our actions to be run serially. We could easily use a Parallel.ForEach instead, which adds parallelism to the actions: // Filter our collection var filteredItems = collection.AsParallel().Where( i => i.SomePredicate() ); // Now perform an action once the filter completes Parallel.ForEach(filteredItems, item => { // These will now run in parallel item.DoSomething(); }); This is a noticeable improvement, since both our filtering and our actions run parallelized.  However, there is still a large bottleneck in place here.  The problem lies with my comment “perform an action once the filter completes”.  Here, we’re parallelizing the filter, then collecting all of the results, blocking until the filter completes.  Once the filtering of every element is completed, we then repartition the results of the filter, reschedule into multiple threads, and perform the action on each element.  By moving this into two separate statements, we potentially double our parallelization overhead, since we’re forcing the work to be partitioned and scheduled twice as many times. This is where the pragmatism comes into play.  By violating our functional principles, we gain the ability to avoid the overhead and cost of rescheduling the work: // Perform an action on the results of our filter collection .AsParallel() .Where( i => i.SomePredicate() ) .ForAll( i => i.DoSomething() ); The ability to avoid the scheduling overhead is a compelling reason to use ForAll.  This really goes back to one of the key points I discussed in data parallelism: Partition your problem in a way to place the most work possible into each task.  Here, this means leaving the statement attached to the expression, even though it causes side effects and is not standard usage for LINQ. This leads to my one guideline for using ForAll: The ForAll extension method should only be used to process the results of a parallel query, as returned by a PLINQ expression. Any other usage scenario should use Parallel.ForEach, instead.

  Read the article

• Good ol fashioned debugging

  - by Tim Dexter

  I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

  Read the article

• Agile Testing Days 2012 – Day 1 – The birth of the #unicorn…

  - by Chris George

  Still riding the high from the tutorial day, I arrived at the conference venue eager to get cracking with the days talks. The opening Keynote was “Disciplined Agile Delivery: The Foundation for Scaling Agile” presented by Scott Ambler. The general ideas behind the methodology such as not re-inventing the wheel, and being goal driven, not prescriptive in how you work certainly struck chords with how we are trying to work in my team. Scott made some interesting observations about how scrum is quite prescriptive and is this really agile? I agreed with quite a few of his points on how what works for one team may not work for another. How a team works should be driven by context and reflection, not process and prescription. However was somewhat dubious about some of the statistics he rolled out towards the end. However, out of this keynote was born something that was to transcend this one presentation. During the talk, Scott mentioned on more than one occasion “In the real world”, and at one point made reference to people living in the land of unicorns and rainbows. The challenge was then laid down on twitter for all speakers to include a unicorn in their presentations… and for the most part this happened! It became an identity for this years conference, and I’m sure something that any attendee will always associate with Agile Testing Days 2012! Following this keynote, I attended “Going agile with Automated GUI Testing – Some personal insights” by Jan Zdunek from codecentric on the vendor track. My speciality is test automation, and in particular GUI testing, so this drew me to this talk more than the others. Thankfully, it was made clear from the very start that this was not peddling any particular product (even though it was on the vendor track), and Jan faithfully stuck to that. Most of the content was not new to me, but it was really comforting to hear someone else with very similar experiences to my own. In particular, things like how GUI testing is hard and is not a silver bullet; how record & replay is NOT a good thing to do (which drew a somewhat inflammatory tweet from an automation company when I tweeted that!). Something that I have started hearing around the place, and has certainly been murmuring at work is to push more of the automation coding onto the developers. After all they are the coding experts. I agree with this to a degree, but I personally enjoy coding and find it very rewarding doing so, therefore I’d be reluctant to give it up. I think there are some better alternatives such as pairing with a developer. Lastly, Jan mentioned, almost in passing, that we should consider virtualisation for gui testing for covering configuration combinations. On my project we’ve been running our win32/.NET GUI tests in cloud virtualisation for a couple of years now… I really should write about that! After lunch the second keynote of the day was by Lisa Crispin and Janet Gregory,”Myths about Agile Testing, De-Bunked”. It started off well… with the two ladies donning Medusa style head bands whilst they disbanding several myths about agile testing! I got the impression that it was perhaps not as slick as they would have liked, but then Janet was suffering with a very sore throat so kept losing her voice. Nevertheless, the presentation was captivating, and they debunked several myths such as : “Testing is dead”, “Testers must write code”, “Agile teams always deliver faster”. I didn’t take many notes for this because it was being recorded, but unfortunately the recordings have not been posted yet so I’ll write more about this when they are. The TestLab was held during a somewhat free for all time during most of the afternoon. It looked intriguing and proved to be one of the surprising experiences of the conference for me. Run by James Lyndsay and Bart Knaack, it consisted of a number of ‘stations’ that offered different testing problems. I opted for testing a mathematical drawing app call Geogebra, the task being to pair up and exploratory test it. After an allotted time, we discussed issues we’d found and decided if we wanted to continue ‘playing’ to which we all agreed! It was fun! The last track talk of the day was “Developers Exploratory Testing – Raising the bar” by Sigge Birgisson. One of the teams at Red Gate have tried Dev or Team exploratory testing a couple of times, and I was really interested to go to the presentation that prompted that. I was not disappointed! Sigge gave a first class presentation, and not only explained what DET was all about, but also how to go about implementing it. Little tips like calling it a ‘workshop’ rather than ‘testing’ I can really see working! Monday evening saw the presentation of the award for the Most Influential Agile Testing Professional Person go to a much deserved Lisa Crispin. The evening was great, with acrobatics, magic and music. My Takeaway Triple from Day 1:  Some of the cool stuff that was suggested in the GUI Testing talk, we are already doing. I should write about that! Testing is not dead! Perhaps testing will become more of a skill than a specific role, but it is certainly not dead. Team/Developer exploratory testing… seems like a no-brainer assuming you have a team who is willing.  Day 2 – Coming soon…

  Read the article

• SnagIt Live Writer Plug-in Updated

  - by Rick Strahl

  Ah, I love SnagIt from TechSmith and I use the heck out of it almost every day. So no surprise that I've decided some time ago to integrate SnagIt into a few applications that require screen shots extensively. It's been a while since I've posted an update to my small SnagIt Windows Live Writer plug-in. There have been a few nagging issues that have crept up with recent changes in the way SnagIt handles captures in recent versions and they have been addressed in this update of SnagIt. Personally I love SnagIt and use it extensively mostly for blogging, but also for writing documentation and articles etc. While there are many other (and also free) tools out there to do basic screen captures, SnagIt continues to be the most convenient tool for me with its nice built in capture and effects editor that makes creating professional looking captures childishly simple. And maybe even more importantly: SnagIt has a COM interface that can be automated and  makes it super easy to embed into other applications. I've built plugins for SnagIt as well as for one of my company's own tools, Html Help Builder. If you use the Windows Live Writer offline WebLog Editor to write blog posts and have a copy of SnagIt it's probably worth your while to check this out if you haven't already. In case you haven't, this plugin integrates SnagIt with Live Writer so you can easily capture and edit content and embed it into a post. Captures are shown in the SnagIt Preview editor where you can edit the image and apply image markup or effects, before selecting Finish (or Cancel). The final image can then be pasted directly into your Live Writer post. When installed the SnagIt plug-in shows up on the PlugIn list or in the Plug-Ins toolbar shortcut: Once you select the Plug in you get the capture window that allows you to customize the capture process which includes most of the useful SnagIt capture options: Once you're done capturing the image shows up in the SnagIt Image Editor and you can crop, mark up and apply effects. When done you click the Finish button and the image is embedded right into your blog post. Easy - how do you think the images in this blog entry got in here? The beauty of SnagIt is that it's all easily integrated - Capturing, editing and embedding, it only takes a few seconds to do it all especially if you save image effect presets in SnagIt. What's updated The main issue addressed in this update has to do with the plug-in updates the Live Writer window. When a capture starts Live Writer gets minimized to get out of the way to let you pick your capture source. When the capture is complete and the image has been embedded Live Writer is activated once again. Recent versions of SnagIt however had changed the Window positioning of SnagIt so that Live Writer ended up popping up back behind the SnagIt window which was pretty annoying. This update pushes Live Writer back to the top of the window stack using some delaying tactics in the code. There have also been a few small changes to the way the code interacts with the COM object which is more reliable if a capture fails or SnagIt blows up or is locked because it's already in a capture outside of the automation interface. Source Code SnagIt Automation is something I actually use a lot. As mentioned I've integrated this automation into Live Writer as well as my documentation tool Html Help Builder, which I use just about daily. The SnagIt integration has a similar interface in that application and provides similar functionality. It's quite useful to integrate SnagIt into other applications. Because it's quite useful to embed SnagIt into other apps there's source code that you can download and embed into your own applications. The code includes both the dialog class that is automated from Live Writer, as well as the basic capture component that captures images to a disk file. Resources Download the SnagIt Capture Plug-in Installer An MSI installer that you can run that will install the plug-in into Live Writer's PlugIns directory. Source Code to the SnagIt Capture Plug-in Contains the plug-in assembly, as well as the source code to the plug-in and the setup project.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Live Writer  WebLog   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Inserting and Deleting Sub Rows in GridView

  - by Vincent Maverick Durano

  A user in the forums (http://forums.asp.net) is asking how to insert  sub rows in GridView and also add delete functionality for the inserted sub rows. In this post I'm going to demonstrate how to this in ASP.NET WebForms.  The basic idea to achieve this is we just need to insert row data in the DataSource that is being used in GridView since the GridView rows will be generated based on the DataSource data. To make it more clear then let's build up a sample application. To start fire up Visual Studio and create a WebSite or Web Application project and then add a new WebForm. In the WebForm ASPX page add this GridView markup below:   1: <asp:gridview ID="GridView1" runat="server" AutoGenerateColumns="false" onrowdatabound="GridView1_RowDataBound"> 2: <Columns> 3: <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> 4: <asp:TemplateField HeaderText="Header 1"> 5: <ItemTemplate> 6: <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> 7: </ItemTemplate> 8: </asp:TemplateField> 9: <asp:TemplateField HeaderText="Header 2"> 10: <ItemTemplate> 11: <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox> 12: </ItemTemplate> 13: </asp:TemplateField> 14: <asp:TemplateField HeaderText="Header 3"> 15: <ItemTemplate> 16: <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox> 17: </ItemTemplate> 18: </asp:TemplateField> 19: <asp:TemplateField HeaderText="Action"> 20: <ItemTemplate> 21: <asp:LinkButton ID="LinkButton1" runat="server" onclick="LinkButton1_Click" Text="Insert"></asp:LinkButton> 22: </ItemTemplate> 23: </asp:TemplateField> 24: </Columns> 25: </asp:gridview>   Then at the code behind source of ASPX page you can add this codes below:   1: private DataTable FillData() { 2:   3: DataTable dt = new DataTable(); 4: DataRow dr = null; 5:   6: //Create DataTable columns 7: dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); 8:   9: //Create Row for each columns 10: dr = dt.NewRow(); 11: dr["RowNumber"] = 1; 12: dt.Rows.Add(dr); 13:   14: dr = dt.NewRow(); 15: dr["RowNumber"] = 2; 16: dt.Rows.Add(dr); 17:   18: dr = dt.NewRow(); 19: dr["RowNumber"] = 3; 20: dt.Rows.Add(dr); 21:   22: dr = dt.NewRow(); 23: dr["RowNumber"] = 4; 24: dt.Rows.Add(dr); 25:   26: dr = dt.NewRow(); 27: dr["RowNumber"] = 5; 28: dt.Rows.Add(dr); 29:   30: //Store the DataTable in ViewState for future reference 31: ViewState["CurrentTable"] = dt; 32:   33: return dt; 34:   35: } 36:   37: private void BindGridView(DataTable dtSource) { 38: GridView1.DataSource = dtSource; 39: GridView1.DataBind(); 40: } 41:   42: private DataRow InsertRow(DataTable dtSource, string value) { 43: DataRow dr = dtSource.NewRow(); 44: dr["RowNumber"] = value; 45: return dr; 46: } 47: //private DataRow DeleteRow(DataTable dtSource, 48:   49: protected void Page_Load(object sender, EventArgs e) { 50: if (!IsPostBack) { 51: BindGridView(FillData()); 52: } 53: } 54:   55: protected void LinkButton1_Click(object sender, EventArgs e) { 56: LinkButton lb = (LinkButton)sender; 57: GridViewRow row = (GridViewRow)lb.NamingContainer; 58: DataTable dtCurrentData = (DataTable)ViewState["CurrentTable"]; 59: if (lb.Text == "Insert") { 60: //Insert new row below the selected row 61: dtCurrentData.Rows.InsertAt(InsertRow(dtCurrentData, row.Cells[0].Text + "-sub"), row.RowIndex + 1); 62:   63: } 64: else { 65: //Delete selected sub row 66: dtCurrentData.Rows.RemoveAt(row.RowIndex); 67: } 68:   69: BindGridView(dtCurrentData); 70: ViewState["CurrentTable"] = dtCurrentData; 71: } 72:   73: protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { 74: if (e.Row.RowType == DataControlRowType.DataRow) { 75: if (e.Row.Cells[0].Text.Contains("-sub")) { 76: ((LinkButton)e.Row.FindControl("LinkButton1")).Text = "Delete"; 77: } 78: } 79: }   As you can see the code above is pretty straight forward and self explainatory but just to give you a short explaination the code above is composed of three (3) private methods which are the FillData(), BindGridView and InsertRow(). The FillData() method is a method that returns a DataTable and basically creates a dummy data in the DataTable to be used as the GridView DataSource. You can replace the code in that method if you want to use actual data from database but for the purpose of this example I just fill the DataTable with a dummy data on it. The BindGridVew is a method that handles the actual binding of GridVew. The InsertRow() is a method that returns a DataRow. This method handles the insertion of the sub row. Now in the LinkButton OnClick event, we casted the sender to a LinkButton to determine the specific object that fires up the event and get the row values. We then reference the Data from ViewState to get the current data that is being used in the GridView. If the LinkButton text is "Insert" then we will insert new row to the DataSource ( in this case the DataTable) based on the rowIndex if not then Delete the sub row that was added. Here are some screen shots of the output below: On initial load:   After inserting a sub row:   That's it! I hope someone find this post useful!   Technorati Tags: ASP.NET,C#,GridView

  Read the article

• Initial Review - Mastering Unreal Technology I: Introduction to Level Design with Unreal Engine 3

  - by Matt Christian

  Recently I purchased 3 large volumes on using the Unreal 3 Engine to create levels and custom games.  This past weekend I cracked the spine of the first and started reading.  Here are my early impressions (I'm ~250 pages into it, with appendices it's about 900). Pros Interestingly, the book starts with an overview of the Unreal engines leading up to Unreal 3 (including Gears of War) and follows with some discussion on planning a mod and what goes into the game development process.  This is nice for an intro to the book and is much preferred rather than a simple chapter detailing what is on the included CD, how to install and setup UnrealEd, etc...  While the chapter on Unreal history and planning can be considered 'fluff', it's much less 'fluffy' than most books provide. I need to mention one thing here that is pretty crucial in the way I'm going to continue reviewing this book.  Most technical books like this are used as a shelf reference; as a thick volume you use for looking up techniques every now and again.  Even so, I prefer reading from cover to cover, including chapters I may already be knowledgable on (I'm sure this is typical for most people).  If there was a chapter on installing UnrealEd (the previously mentioned 'fluff'), I would probably force myself to read it, even though I've installed the game and engine multiple times on different systems. Chapter 3 is where we really get to the introduction piece of UnrealEd, creating your first basic level.  This large chapter details creating two small rooms, adding static meshes, adding lighting, creating and adding particle emitters, creating a door that animates with Unreal Matinee and Kismet, static meshes with physics, and other little additions to make your level look less beginner.  This really is a chapter that overviews the entire rest of the book, as each chapter following details the creation and intermediate usages of Static Meshes, Materials, Lighting, etc... One other very nice part to this book is the way the tutorials are setup.  Each tutorial builds off the previous and all are step-by-step.  If you haven't completed one yet, you can find all the starting files on the CD that comes with the book. Cons While the description of the overview chapter (Chapter 3) is fresh in your mind, let me start the cons by saying this chapter is setup extremely confusing for the noob.  At one point, you end up creating a door mesh and setting it up as a InteropMesh so that it is ready to be animated, only to switch to particles and spend a good portion of time working on a different piece of the level.  Yes, this is actually how I develop my levels (jumping back and forth), though it's very odd for a book to jump out of sequence. The next item might be a positive or a negative depending on your skill level with UnrealEd.  Most of the introduction to the editor layout is found in one of the Appendices instead of before Chapter 3.  For new readers, this might lead to confusion as Appendix A would typically be read between Chapter 2 and 3.  However, this is a positive for those with some experience in UnrealEd as they don't have to force themselves through a 'learn every editor button' chapter.  I'm listing this in the Cons section as the book is 'Introduction to...' and is probably going to be directed toward a lot of very beginner developers. Finally, there's a lack of general description to a lot of the underlying engine and what each piece in UnrealEd is or does.  Sometimes you'll be performing Tutorial after Tutorial with barely a paragraph in between describing ANY of what you've just done.  Tutorial 1.1 Step 6 says to press Button X, so you do.  But why?  This is in part a problem with the structure of the tutorials rather than the content of the book.  Since the tutorials are so focused on a step-by-step (or procedural) description of a process, you learn the process and not why you're doing that.  For example, you might learn how to size a material to a surface, but will only learn what buttons to press and not what each one does. This becomes extremely apparent in the chapter on Static Meshes as most of the chapter is spent in 3D Studio Max.  Since there are books on 3DSM and modelling, the book really only tells you the steps and says to go grab a book on modelling if you're really interested in 3DSM.  Again, I've learned the process to develop my own meshes in 3DSM, but I don't know the why behind the steps. Conclusion So far the book is very good though I would have a hard time recommending it to a complete beginner.  I would suggest anyone looking at this book (obviously including the other 2, more advanced volumes) to pick up a copy of UDK or Unreal 3 (available online or via download services such as Steam) and watch some online tutorials and play with it first.  You'll find plenty of online videos available that were created by the authors and may suit as a better introduction to the editor.

  Read the article

• SQL Saturday #44 Huntington Beach Recap

  What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Smarter, Faster, Cheaper: The Insurance Industry’s Dream

  - by Jenna Danko

  On June 3rd, I saw the Gaylord Resort Centre in Washington D.C. become the hub of C level executives and managers of insurance carriers for the IASA 2013 Conference.  Insurance Accounting/Regulation and Technology sessions took the focus, but there were plenty of tertiary sessions for career development, which complemented the overall strong networking side of the conference.  As an exhibitor, Oracle, along with several hundred other product providers, welcomed the opportunity to display and demonstrate our solutions and we were encouraged by hustle and bustle of the exhibition floor.  The IASA organizers had pre-arranged fast track tours whereby interested conference delegates could sign up for a series of like-themed presentations from Vendors, giving them a level of 'Speed Dating' introductions to possible solutions and services.  Oracle participated in a number of these, which were very well subscribed.  Clearly, the conference had a strong business focus; however, attendees saw technology as a key enabler to get their processes done smarter, faster and cheaper.  As we navigated through the exhibition, it became clear from the inquiries that came to us that insurance carriers are gravitating to a number of focus areas: Navigating the maze of upcoming regulatory reporting changes. For US carriers with European holdings, Solvency II carries a myriad of rules and reporting requirements. Alignment across the globe of the Own Risk and Solvency Assessment (ORSA) processes brings to the fore the National Insurance of Insurance commissioners' (NAIC) recent guidance manual publication. Doing more with less and to certainly expect more from technology for less dollars. The overall cost of IT, in particular hardware, has dropped in real terms (though the appetite for more has risen: more CPU, more RAM, more storage), but software has seen less change. Clearly, customers expect either to pay less or get a lot more from their software solutions for the same buck. Doing things smarter – A recognition that with the advance of technology to stand still no longer means you are technically going backwards. Technology and, in particular technology interactions with human business processes, has undergone incredible change over the past 5 years. Consumer usage (iPhones, etc.) has been at the forefront, but now at the Enterprise level ever more effective technology exploitation is beginning to take place. That data and, in particular gleaning knowledge from data, is refining and improving business processes.  Organizations are now consuming more data than ever before, and it is set to grow exponentially for some time to come.  Amassing large volumes of data is one thing, but effectively analyzing that data is another.  It is the results of such analysis that leads to improvements both in terms of insurance product offerings and the processes to support them. Regulatory Compliance, damned if you do and damned if you don’t! Clearly, around the globe at lot is changing from a regulatory perspective and it is evident that in terms of regulatory requirements, whilst there is a greater convergence across jurisdictions bringing uniformity, there is also a lot of work to be done in the next 5 years. Just like the big data, hidden behind effective regulatory compliance there often lies golden nuggets that can give competitive advantages. From Oracle's perspective, our Rating Engine, Billing, Document Management and Insurance Analytics solutions on display served to strike up good conversations and, as is always the case at conferences, it was a great opportunity to meet and speak with existing Oracle customers that we might not have otherwise caught up with for a while. Fortunately, I was able to catch up on a few sessions at the close of the Exhibition.  The speaker quality was high and the audience asked challenging, but pertinent, questions.  During Dr. Jackie Freiberg’s keynote “Bye Bye Business as Usual,” the author discussed 8 strategies to help leaders create a culture where teams consistently deliver innovative ideas by disrupting the status quo.  The very first strategy: Get wired for innovation.  Freiberg admitted that folks in the insurance and financial services industry understand and know innovation is important, but oftentimes they are slow adopters.  Today, technology and innovation go hand in hand. In speaking to delegates during and after the conference, a high degree of satisfaction could be measured from their positive comments of speaker sessions and the exhibitors. I suspect many will be back in 2014 with Indianapolis as the conference location. Did you attend the IASA Conference in Washington D.C.?  If so, I would love to hear your comments. Andrew Collins is the Director, Solvency II of Oracle Financial Services. He can be reached at andrew.collins AT oracle.com.

  Read the article

• Detecting Idle Time with Global Mouse and Keyboard Hooks in WPF

  - by jdanforth

  Years and years ago I wrote this blog post about detecting if the user was idle or active at the keyboard (and mouse) using a global hook. Well that code was for .NET 2.0 and Windows Forms and for some reason I wanted to try the same in WPF and noticed that a few things around the keyboard and mouse hooks didn’t work as expected in the WPF environment. So I had to change a few things and here’s the code for it, working in .NET 4. I took the liberty and refactored a few things while at it and here’s the code now. I’m sure I will need it in the far future as well. using System; using System.Diagnostics; using System.Runtime.InteropServices; namespace Irm.Tim.Snapper.Util { public class ClientIdleHandler : IDisposable { public bool IsActive { get; set; } int _hHookKbd; int _hHookMouse; public delegate int HookProc(int nCode, IntPtr wParam, IntPtr lParam); public event HookProc MouseHookProcedure; public event HookProc KbdHookProcedure; //Use this function to install thread-specific hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int SetWindowsHookEx(int idHook, HookProc lpfn, IntPtr hInstance, int threadId); //Call this function to uninstall the hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern bool UnhookWindowsHookEx(int idHook); //Use this function to pass the hook information to next hook procedure in chain. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int CallNextHookEx(int idHook, int nCode, IntPtr wParam, IntPtr lParam); //Use this hook to get the module handle, needed for WPF environment [DllImport("kernel32.dll", CharSet = CharSet.Auto)] public static extern IntPtr GetModuleHandle(string lpModuleName); public enum HookType : int { GlobalKeyboard = 13, GlobalMouse = 14 } public int MouseHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the mouse IsActive = true; Debug.Print("Mouse active"); //just return the next hook return CallNextHookEx(_hHookMouse, nCode, wParam, lParam); } public int KbdHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the keyboard IsActive = true; Debug.Print("Keyboard active"); //just return the next hook return CallNextHookEx(_hHookKbd, nCode, wParam, lParam); } public void Start() { using (var currentProcess = Process.GetCurrentProcess()) using (var mainModule = currentProcess.MainModule) { if (_hHookMouse == 0) { // Create an instance of HookProc. MouseHookProcedure = new HookProc(MouseHookProc); // Create an instance of HookProc. KbdHookProcedure = new HookProc(KbdHookProc); //register a global hook _hHookMouse = SetWindowsHookEx((int)HookType.GlobalMouse, MouseHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookMouse == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the mouse"); } } if (_hHookKbd == 0) { //register a global hook _hHookKbd = SetWindowsHookEx((int)HookType.GlobalKeyboard, KbdHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookKbd == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the keyboard"); } } } } public void Close() { if (_hHookMouse != 0) { bool ret = UnhookWindowsHookEx(_hHookMouse); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the mouse"); } _hHookMouse = 0; } if (_hHookKbd != 0) { bool ret = UnhookWindowsHookEx(_hHookKbd); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the keyboard"); } _hHookKbd = 0; } } #region IDisposable Members public void Dispose() { if (_hHookMouse != 0 || _hHookKbd != 0) Close(); } #endregion } } The way you use it is quite simple, for example in a WPF application with a simple Window and a TextBlock: <Window x:Class="WpfApplication2.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <Grid> <TextBlock Name="IdleTextBox"/> </Grid> </Window> And in the code behind we wire up the ClientIdleHandler and a DispatcherTimer that ticks every second: public partial class MainWindow : Window { private DispatcherTimer _dispatcherTimer; private ClientIdleHandler _clientIdleHandler; public MainWindow() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { //start client idle hook _clientIdleHandler = new ClientIdleHandler(); _clientIdleHandler.Start(); //start timer _dispatcherTimer = new DispatcherTimer(); _dispatcherTimer.Tick += TimerTick; _dispatcherTimer.Interval = new TimeSpan(0, 0, 0, 1); _dispatcherTimer.Start(); } private void TimerTick(object sender, EventArgs e) { if (_clientIdleHandler.IsActive) { IdleTextBox.Text = "Active"; //reset IsActive flag _clientIdleHandler.IsActive = false; } else IdleTextBox.Text = "Idle"; } } Remember to reset the ClientIdleHandle IsActive flag after a check.

  Read the article

• Hiding an item conditionally through SPEL in OAF ( VO Extension + Personalization )

  - by Manoj Madhusoodanan

  In this blog I will explain how to conditionally set property of an item through personalization.Let me discuss using a business scenario. My customer wants to make Hold from Payment/ All Invoices column readonly when the Operating Unit is UK ( Configured in a lookup XXCUST_EXCLUDED_ORGS ). Analysis First thing is we have to find out the page and business components. Page: /oracle/apps/pos/supplier/webui/QuickUpdatePGView Object: oracle.apps.pos.supplier.server.SitesVO Solution Download oracle.apps.pos.supplier.server.SitesVO from $JAVA_TOP to JDEV_USER_HOME/myprojects.Make sure the transfer mode of the file (See below table). Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} File Type Transfer Mode .xml ASCII .class Binary .tar Binary .java ASCII  Since there is no VO attribute available to determine the Site Org against the lookup Org we have to add the logic inside a custom VO attribute. So VO extension is required in this scenario. Add an attribute "isPymtReadOnlyStr" in the existing query.This column returns 'Y' if there is a match in the lookup otherwise 'N'. Create a transient attribute "isPymtReadOnly" of type BOOLEAN.This will return TRUE if "isPymtReadOnlyStr" is "Y" otherwise FALSE. The reason behind adding the "isPymtReadOnly" is we are setting the item property as readonly through SPEL.It will recognize only BOOLEAN.But SQL query doesn't support BOOLEAN.So we are building a BOOLEAN attribute from the SQL which will use in the personalization layer to set the item property. Steps 1) Create a new VO xxcust.oracle.apps.pos.supplier.server.XXCUSTSitesVO which extends from oracle.apps.pos.supplier.server.SitesVO. Make sure the binding style should be same as SitesVO. Create the XXCUSTSitesVO which same query of SitesVO.Later we will add the new attribute to XXCUSTSitesVO. At this point of time all the existing VO attributes are of Updatable property as "Always". Press Finish without creating XXCUSTSitesVORowImpl.java 2) Select the XXCUSTSitesVO from JDeveloper Application Navigator. Modify the query and add the extra column. 3) Create a new transient attribute as follows. 4) Once you modify the query all the existing attributes Updatable property will change to Never.So revert that property back to orginal. 5) Create XXCUSTSitesVORowImpl.java by checking the following check box. 6) Add the following code snippet in XXCUSTSitesVORowImpl.java 7) Create the substitution for SitesVO as follows. Following entry will get created in current jpx file.    <Substitutes>      <Substitute OldName ="oracle.apps.pos.supplier.server.SitesVO" NewName ="xxcust.oracle.apps.pos.supplier.server.XXCUSTSitesVO" />   </Substitutes> 8) Migrate XXCUSTSitesVOImpl.java,XXCUSTSitesVORowImpl.java and XXCUSTSitesVO.xml from desktop to actual instance. 9) Migrate the substitution using jpximporter. 10) Restart the server and verify the substitution has done perfectly. 11) Go to /oracle/apps/pos/supplier/webui/QuickUpdatePG and personalize the page.Set the item read only property to ${oa.SitesVO.IsPymtReadOnly} 12) Click on Apply and in next page click on Return to Application. Verify your output.  Note: You can remove the substitution using following script.Please click here.

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >