Search Results

Search found 7371 results on 295 pages for 'raid card'.

Page 204/295 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

• perfmon reporting higher IOPs than possible?

  - by BlueToast

  We created a monitoring report for IOPs on performance counters using Disk reads/sec and Disk writes/sec on four servers (physical boxes, no virtualization) that have 4x 15k 146GB SAS drives in RAID10 per server, set to check and record data every 1 second, and logged for 24 hours before stopping reports. These are the results we got: Server1 Maximum disk reads/sec: 4249.437 Maximum disk writes/sec: 4178.946 Server2 Maximum disk reads/sec: 2550.140 Maximum disk writes/sec: 5177.821 Server3 Maximum disk reads/sec: 1903.300 Maximum disk writes/sec: 5299.036 Server4 Maximum disk reads/sec: 8453.572 Maximum disk writes/sec: 11584.653 The average disk reads and writes per second were generally low. I.e. for one particular server it was like average 33 writes/sec, but when monitoring in real-time it would often spike up to several hundreds and also sometimes into the thousands. Could someone explain to me why these numbers are significantly higher than theoretical calculations assuming each drive can do 180 IOPs? Additional details (RAID card): HP Smart Array P410i, Total cache size of 1GB, Write cache is disabled, Array accelerator cache ratio is 25% read and 75% write

  Read the article

• What is the advantage of iSCSI over SMB?

  - by sofakng

  At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

  Read the article

• Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

  - by Charles Long

  I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• Parity Initialization after putting in two new disks

  - by lbanz

  All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

  Read the article

• "Always available offline" option missing on one network drive in Windows 7

  - by Rynardt

  My network setup at home has 2 network storage devices on the network. The one is for media content on a Popcorn Hour A-110 and the other is a D-Link DNS-320 in RAID 1 configuration for business files. When I access these network drives and right click a folder the following context menu appears for the A-110 device, but not for the D-link. I have tested this in both Windows 7 32bit and Windows Vista 64bit. In both instances the "Always available offline" option is only available for the A-110 storage device, and not for the D-link. How do I get this option for the D-link? Any advice or ideas are welcome.

  Read the article

• Ubuntu server hangs on reboot "could not stat resume device file"

  - by matnagel

  Instead of booting into the running system this machine stops and on the terminal I can see a message: could not stat resume device file /dev/sdb5 When I attach a keyboard and press enter the boot continues and the machine comes up like normal. But it's essential that this machine comes up under most circumstancs alone. There never was something like a "resume" on this machine. I tried several times to reboot, but this does not happen on all boots, I can not find a pattern here. There is a software raid running on the box. This is the syslog during boot: http://privatepaste.com/ff0fd0a51c/sdabfjahfgasjkgfu4gfsdzjcgfafasdjfhgasdcjfgauzfgafasgdufzg How can I get rid of this boot failure? We do not need resumes and best would be something that works here and now.

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• Looking for fault-tolerant, multi-CD/DVD burning software

  - by MichaelKay

  A few years back, I saw an open-source application that created fault-tolerant, multi-CD backup sets. The thought was that if a few sectors went bad on one CD, the data could be reconstructed from others similar to a RAID 5 hard-drive setup. I did some searching and I could not find the application again. Does anyone know of a application that works in this manner. It needs to work with both CDs & DVDs. Linux or Windows will be OK.

  Read the article

• Problems with XP, Office, and PC in general - any ideas?

  - by molecule

  Hi all This may not make a whole lot of sense so pls bear with me... I am about to perform a routine check on one of my user's PC. Some background - the PC has a Xeon processor and 4Gb of RAM and running XP SP3 He has 2xHDD and pagefile is hosted on the secondary HDD (D:) and min/max values are set to 4096. NO pagefile on C: This user has 6 monitors so he has an NVIDIA Quadro NVS440 hosting 4xmonitors and an NVIDIA Quadro NVS290 hosting 2xmonitors. There is a video card driver from NVIDIA which is compatible with both NVS440 and NVS290 and he is on the latest version of that driver. (Note: Make of video cards are different - one is from leadtek and the other from Nvidia) He is a heavy Bloomberg, Outlook, Word, and Excel user and runs two Citrix applications. Other apps are FoxIt PDF and IE. Problems - Outlook and Excel frequently crashes - I am going to perform an Outlook and Excel repair and also check/remove unnecessary addins - will he lose any customizations if I repaired and chose "Restore my shortcuts while repairing" and do not select "Discard my customized settings and restore default settings". Does repair really repair anything? FYI - It stopped crashing ever since i moved a large spreadsheet he has open to his local HDD instead of over the network. This spreadsheet "refreshes" constantly as it is pulling live data to update cells and I suspect it was auto-saving so frequently that it caused crashes if saving over the network. At times, his right click completely fails to respond. His left click works fine but he can't right click on anything in any Window and even on the desktop. Sometimes, he needs to start to close certain applications such as Adobe and the right click will start functioning again. I removed Adobe and installed FoxIt as I figured it was a resource issue but I do not think so as he does have sufficient resources when the problem is happening. Sometimes he can't bring task manager up until he kills certain apps. Definitely sounds like a resource issue but I am not confident that is the root cause. Also not sure if this is related to one of the apps installed but his Start bar flickers (does not completely disappear) intermittently from time to time. The taskbar icons which are hidden appear and then get hidden again as if it was having "fits". I have performed reg scans, malware scans etc but problems do not go away. I am planning to perform sfc /scannow and office repair but would like to know if anyone has any other suggestions. What about setting a "small" pagefile on C:. I have heard that this is recommended and may be the reason why a minidmp file was not generated when he encountered a blue screen. Also, any feedback on his video cards? Do you think different models would cause problems? The drivers seem to work but he only has 2.5Gb out of 4Gb available RAM as I believe the video card chomped up a portion of this. I have recommended creating a new profile for him but due to the amount of customisations he has and the amount of time and effort it will take to get him up and running again, he prefers to bear with the problem than to go down that path. However, at least once a week, his PC acts up and I can't think of any other tools or techniques to rectify his problems. I guess we are at a stage where we just want to "stabilize" things so he won't encounter issues that frequently. Any feedback is very much appreciated.

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

• Repair Lacie 2Big Network 2

  - by Donier

  hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

  Read the article

• Concerns about a Dedicated (Windows Server 2008) + DDoS

  - by TheKillerDev

  I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

  Read the article

• Motherboard rejects identical hard drive, one works the other doesn't

  - by Payson Welch

  I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

  - by Kris Jordan

  Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

  Read the article

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• Computer not POSTing "randomly"?

  - by smoth190

  I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

  Read the article

• Shared storage for web cluster

  - by user52475

  Hi all! Have a big question about shared/clustered/distributed file system for storage. It will shared storage for shared web hosting (web files + maildir) and OpenVZ containers storage . Have any one working example of such system? The options are: Lustre GFS1/GFS2 - GFS2 - as I understand is EXPERIMENTAL... NFS This 3 systems which I consider for shared storage. Now I have storage with HW RAID 10 - 1TB. NFS - As I know there will be problem with locking? GFS/Lustre - problems when there will be a lot of small files , what is typical for hosting environment and problems with maildir.

  Read the article

• Shared storage solution for our sql server backups

  - by Gokhan

  We have 3 clustered sql servers. We have 5+ multi terrabyte databases and their backup files (compressed using quest litespeed) are hitting over 600gb each, We are required to keep at least a week or two weeks (if we can) of weekly full backups and then 6 days differential backups, and a week or 2 weeks worth of log backups local. We are currently limited to 2TB volumes from our san team, we can have multiple volumes but they are expensive ($200 per raw TB per month) and having to deal with many backup volumes instead of a single big volume is difficult. I think if we could have a shared network storage of 20TB+ raid 10 or so for all our servers for keeping the backups and another department will copy them to tape from the network storage and delete files according to the retention period would be good, if this box would be a build in operating system (even unix a complete file storage system) that would be good. What do you guys think, does this make sense to you, is there any manufacturer that sells a storage product like that which that work in a clustered environment? Thank you

  Read the article

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

• Is there still a place for tape storage?

  - by Jon Ericson

  We've backed up our data on LTO tapes for years and it's a real comfort to know we have everything on tape. A sister project and one of our data providers have both moved to 100% disk storage because the cost of disk has dropped so much. When we propose systems to potential customers these days we tend to downplay or not mention our use of tape systems for data storage since it might seem outdated. I feel more comfortable with having data saved in two separate formats: disks and tape. In addition, once data is securely written to tape, I feel (perhaps naively) that it's been permanently saved. Not having to rely on a RAID controller to be able to read back data is another plus for me. Do you see a place for tape backup these days?

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• Best technique for reusing a Windows system image across configurations

  - by Martin Wiboe

  We are a small company that provides solutions for ventilation systems. Part of the solution is a "controller" which communicates with the ventilation equipment. These controllers are simply Dell computers that come with our Windows 7 system image on them and sometimes some special hardware. We typically do a batch of 10 controllers at a time. We have been using Norton Ghost to apply the system image, but this process breaks because Dell changes the system configuration often, and our Windows image now does not contain the correct drivers. This is especially a problem when they change the RAID controller. To improve this, I see 2 options: use some kind of virtualization and install a hypervisor on each PC. This would solve the driver problem, but probably cause trouble with our special hardware. use some method of adding the proper drivers to our Windows image in offline mode. I haven't got much experience in either of these approaches. How would you solve our problem?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >