Search Results

Search found 28744 results on 1150 pages for 'event wait handle'.

Page 209/1150 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• NHibernate.MappingException - Troubles Shooting Checklist (no persister for)

  - by Berryl

  Here's a starter list: 1) if hbm is hand generated, is it an embedded resource? 2) if using FNH, does it pass a PerssistenceSpecification test? 3) if not using FNH, can you save and then load the persisted class? 4) more? I'm sure many of you have gotten this one at one point or another. But have you ever gotten it when you knew your mapping was set up correctly? I started getting this exception after I started using a new repository design, but only in one scenario! PersistenceSpecification tests pass, as do all repository methods (using SQLite). The scenario that leads to the exception is when legacy projects from a different db are converted to green field system. The legacy system is from a different database and has it's own session factory, which should be irrelevant because the error comes after previously unconverted Projects are retrieved and in memory. As the routine tries to save these unconverted Projects into the new database, the exception is thrown, full stack trace below. Any ideas on how to build up the trouble shooting check list and solves this problem? Cheers, Berryl === the Exception trace ===== failed: NHibernate.MappingException : No persister for: Smack.ConstructionAdmin.Domain.Model.Projects.Project at NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) at NHibernate.Impl.SessionImpl.GetEntityPersister(String entityName, Object obj) at NHibernate.Engine.ForeignKeys.IsTransient(String entityName, Object entity, Nullable`1 assumed, ISessionImplementor session) at NHibernate.Event.Default.AbstractSaveEventListener.GetEntityState(Object entity, String entityName, EntityEntry entry, ISessionImplementor source) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.PerformSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.OnSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.FireSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.SaveOrUpdate(Object obj) NHibernate\Repository\FabioNHibRepository.cs(46,0): at Smack.Core.Data.NHibernate.Repository.FabioNHibRepository`1.Add(T item) LegacyConversion\LegacyBatchUpdater.cs(20,0): at Smack.ConstructionAdmin.Data.LegacyConversion.LegacyBatchUpdater.ConvertOpenLegacyProjects(ILegacyProjectDao legacyProjectDao, IProjectRepository greenProjectRepository) Data\Brownfield\ProjectBatchUpdate_SQLiteTests.cs(19,0): at Smack.ConstructionAdmin.Tests.Data.Brownfield.ProjectBatchUpdate_SQLiteTests.Test()

  Read the article

• Active Record two belongs_to calls or single table inheritance

  - by ethyreal

  In linking a sports event to two teams, at first this seemed to make sense: events - id:integer - integer:home_team_id - integer:away_team_id teams - integer:id - string:name However I am troubled by how I would link that up in the active record model: class Event belongs_to :home_team, :class_name => 'Team', :foreign_key => "home_team_id" belongs_to :away_team, :class_name => 'Team', :foreign_key => "away_team_id" end Is that the best solution? In an answer to a similar question I was pointed to single table inheritance, and then later found polymorphic associations. Neither of which seemed to fit this association. Perhaps I am looking at this wrong, but I see no need to subclass a team into home and away teams since the distinction is only in where the game is played. If I did go with single table inheritance I wouldn't want each team to belong_to an event so would this work? # app/models/event.rb class Event < ActiveRecord::Base belongs_to :home_team belongs_to :away_team end # app/models/team.rb class Team < ActiveRecord::Base has_many :teams end # app/models/home_team.rb class HomeTeam < Team end # app/models/away_team.rb class AwayTeam < Team end I thought also about a has_many through association but that seems two much as I will only ever need two teams, but those two teams don't belong to any one event. event_teams - integer:event_id - integer:team_id - boolean:is_home Is there a cleaner more semantic way for making these associations in active record? or is one of these solutions the best choice? Thanks

  Read the article

• Marshal.PtrToStructure (and back again) and generic solution for endianness swapping

  - by cgyDeveloper

  I have a system where a remote agent sends serialized structures (from and embedded C system) for me to read and store via IP/UDP. In some cases I need to send back the same structure types. I thought I had a nice setup using Marshal.PtrToStructure (receive) and Marshal.StructureToPtr (send). However, a small gotcha is that the network big endian integers need to be converted to my x86 little endian format to be used locally. When I'm sending them off again, big endian is the way to go. Here are the functions in question: private static T BytesToStruct<T>(ref byte[] rawData) where T: struct { T result = default(T); GCHandle handle = GCHandle.Alloc(rawData, GCHandleType.Pinned); try { IntPtr rawDataPtr = handle.AddrOfPinnedObject(); result = (T)Marshal.PtrToStructure(rawDataPtr, typeof(T)); } finally { handle.Free(); } return result; } private static byte[] StructToBytes<T>(T data) where T: struct { byte[] rawData = new byte[Marshal.SizeOf(data)]; GCHandle handle = GCHandle.Alloc(rawData, GCHandleType.Pinned); try { IntPtr rawDataPtr = handle.AddrOfPinnedObject(); Marshal.StructureToPtr(data, rawDataPtr, false); } finally { handle.Free(); } return rawData; } And a quick example structure that might be used like this: byte[] data = this.sock.Receive(ref this.ipep); Request request = BytesToStruct<Request>(ref data); Where the structure in question looks like: [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 1)] private struct Request { public byte type; public short sequence; [MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)] public byte[] address; } What (generic) way can I swap the endianness when marshalling the structures? My need is such that the locally stored 'public short sequence' in this example will be little-endian for displaying to the user. I don't want to have to swap the endianness on a structure-specific way. My first thought was to use Reflection, but I'm not very familiar with that feature. Also, I hoped that there would be a better solution out there that somebody could point me towards. Thanks in advance :)

  Read the article

• Number of connections to the host at the same time

  - by sev

  How can I handle this?

  Read the article

• Silverlight - how to render image from non-visible data bound user control?

  - by MagicMax

  Hello! I have such situation - I'd like to build timeline control. So I have UserControl and ItemsControl on it (every row represents some person). The ItemsControl contains another ItemsControl as ItemsControl.ItemTemplate - it shows e.g. events for the person arranged by event's date. So it looks as some kind of grid with dates as a column headers and e.g. peoples as row headers. ........................|.2010.01.01.....2010.01.02.....2010.01.03 Adam Smith....|......[some event#1].....[some event#2]...... John Dow.......|...[some event#3].....[some event#4]......... I can have a lot of persons (ItemsControl #1 - 100-200 items) and a lot of events occured by some day (1-10-30 events per person in one day) the problem is that when user scrolls ItemsControl #1/#2 it happened toooo sloooooowwww due to a lot of elements should be rendered in one time (as I have e.g. a bit of text boxes and other elements in description of particular event) Question #1 - how can I improve it? May be somebody knows better way to build such user control? I have to mention that I'm using custom Virtual panel, based on some custom Virtual panel implementation found somewhere in internet... Question #2 - I'd like to make image with help of WriteableBitmap and render data bound control to image and to show image instead of a lot of elements. Problem is that I'm trying to render invisible data bound control (created in code behind) and it has actualWidth/Height equals to zero (so nothing rendered). How can I solve it? Thank you very much for you help!

  Read the article

• Basic File upload in GWT

  - by Maksim

  I'm trying to figure out how to upload one file using GWTs FileUpload widget. I'm using GWT and Google AppEngine with Java but I would like to upload file to my own Linux server. I have the following code already but now I can't figure out how to submit my file to the Google AppServer server and save it to another server: public class FileUploader{ private ControlPanel cp; private FormPanel form = new FormPanel(); private FileUpload fu = new FileUpload(); public FileUploader(ControlPanel cp) { this.cp = cp; this.cp.setPrimaryArea(getFileUploaderWidget()); } @SuppressWarnings("deprecation") public Widget getFileUploaderWidget() { form.setEncoding(FormPanel.ENCODING_MULTIPART); form.setMethod(FormPanel.METHOD_POST); // form.setAction(/* WHAT SHOULD I PUT HERE */); VerticalPanel holder = new VerticalPanel(); fu.setName("upload"); holder.add(fu); holder.add(new Button("Submit", new ClickHandler() { public void onClick(ClickEvent event) { GWT.log("You selected: " + fu.getFilename(), null); form.submit(); } })); form.addSubmitHandler(new FormPanel.SubmitHandler() { public void onSubmit(SubmitEvent event) { if (!"".equalsIgnoreCase(fu.getFilename())) { GWT.log("UPLOADING FILE????", null); // NOW WHAT???? } else{ event.cancel(); // cancel the event } } }); form.addSubmitCompleteHandler(new FormPanel.SubmitCompleteHandler() { public void onSubmitComplete(SubmitCompleteEvent event) { Window.alert(event.getResults()); } }); form.add(holder); return form; } } Now, what do I need to do next? What do i need to put in web.xml and how do I write my servlet so i can store file and return url of that object (if possible)

  Read the article

• Sending multiline message via sockets without closing the connection

  - by Yasir Arsanukaev

  Hello folks. Currently I have this code of my client-side Haskell application: import Network.Socket import Network.BSD import System.IO hiding (hPutStr, hPutStrLn, hGetLine, hGetContents) import System.IO.UTF8 connectserver :: HostName -- ^ Remote hostname, or localhost -> String -- ^ Port number or name -> IO Handle connectserver hostname port = withSocketsDo $ do -- withSocketsDo is required on Windows -- Look up the hostname and port. Either raises an exception -- or returns a nonempty list. First element in that list -- is supposed to be the best option. addrinfos <- getAddrInfo Nothing (Just hostname) (Just port) let serveraddr = head addrinfos -- Establish a socket for communication sock <- socket (addrFamily serveraddr) Stream defaultProtocol -- Mark the socket for keep-alive handling since it may be idle -- for long periods of time setSocketOption sock KeepAlive 1 -- Connect to server connect sock (addrAddress serveraddr) -- Make a Handle out of it for convenience h <- socketToHandle sock ReadWriteMode -- Were going to set buffering to LineBuffering and then -- explicitly call hFlush after each message, below, so that -- messages get logged immediately hSetBuffering h LineBuffering return h sendid :: Handle -> String -> IO String sendid h id = do hPutStr h id -- Make sure that we send data immediately hFlush h -- Retrieve results hGetLine h The code portions in connectserver are from this chapter of Real World Haskell book where they say: When dealing with TCP data, it's often convenient to convert a socket into a Haskell Handle. We do so here, and explicitly set the buffering – an important point for TCP communication. Next, we set up lazy reading from the socket's Handle. For each incoming line, we pass it to handle. After there is no more data – because the remote end has closed the socket – we output a message about that. Since hGetContents blocks until the server closes the socket on the other side, I used hGetLine instead. It satisfied me before I decided to implement multiline output to client. I wouldn't like the server to close a socket every time it finishes sending multiline text. The only simple idea I have at the moment is to count the number of linefeeds and stop reading lines after two subsequent linefeeds. Do you have any better suggestions? Thanks.

  Read the article

• Dragging an UIView inside UIScrollView

  - by Sergey Mikhanov

  Hello community! I am trying to solve a basic problem with drag and drop on iPhone. Here's my setup: I have a UIScrollView which has one large content subview (I'm able to scroll and zoom it) Content subview has several small tiles as subviews that should be dragged around inside it. My UIScrollView subclass has this method: - (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event { UIView *tile = [contentView pointInsideTiles:[self convertPoint:point toView:contentView] withEvent:event]; if (tile) { return tile; } else { return [super hitTest:point withEvent:event]; } } Content subview has this method: - (UIView *)pointInsideTiles:(CGPoint)point withEvent:(UIEvent *)event { for (TileView *tile in tiles) { if ([tile pointInside:[self convertPoint:point toView:tile] withEvent:event]) return tile; } return nil; } And tile view has this method: - (void)touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event { UITouch *touch = [touches anyObject]; CGPoint location = [touch locationInView:self.superview]; self.center = location; } This works, but not fully correct: the tile sometimes "falls down" during the drag process. More precisely, it stops receiving touchesMoved: invocations, and scroll view starts scrolling instead. I noticed that this depends on the drag speed: the faster I drag, the quicker the tile "falls". Any ideas on how to keep the tile glued to the dragging finger? Thanks in advance!

  Read the article

• Best Practice - Removing item from generic collection in C#

  - by Matt Davis

  I'm using C# in Visual Studio 2008 with .NET 3.5. I have a generic dictionary that maps types of events to a generic list of subscribers. A subscriber can be subscribed to more than one event. private static Dictionary<EventType, List<ISubscriber>> _subscriptions; To remove a subscriber from the subscription list, I can use either of these two options. Option 1: ISubscriber subscriber; // defined elsewhere foreach (EventType event in _subscriptions.Keys) { if (_subscriptions[event].Contains(subscriber)) { _subscriptions[event].Remove(subscriber); } } Option 2: ISubscriber subscriber; // defined elsewhere foreach (EventType event in _subscriptions.Keys) { _subscriptions[event].Remove(subscriber); } I have two questions. First, notice that Option 1 checks for existence before removing the item, while Option 2 uses a brute force removal since Remove() does not throw an exception. Of these two, which is the preferred, "best-practice" way to do this? Second, is there another, "cleaner," more elegant way to do this, perhaps with a lambda expression or using a LINQ extension? I'm still getting acclimated to these two features. Thanks. EDIT Just to clarify, I realize that the choice between Options 1 and 2 is a choice of speed (Option 2) versus maintainability (Option 1). In this particular case, I'm not necessarily trying to optimize the code, although that is certainly a worthy consideration. What I'm trying to understand is if there is a generally well-established practice for doing this. If not, which option would you use in your own code?

  Read the article

• C# COM Cross Thread problem

  - by user364676

  Hi, we're developing a software to control a scientific measuring device. it provides a COM-Interface defines serveral functions to set measurement parameters and fires an event when it measured data. in order to test our software, i'm implementing a simulation of that device. the com-object runs a loop which periodically fires the event. another loop in the client app should now setup up the com-simulator using the given functions. i created a class for measuring parameters which will be instanciated when setting up a new measurement. // COM-Object public class MeasurementParams { public double Param1; public double Param2; } public class COM_Sim : ICOMDevice { public MeasurementParams newMeasurement; IClient client; public int NewMeasurement() { newMeasurment = new MeasurementParam(); } public int SetParam1(double val) { // why is newMeasurement null when method is called from client loop newMeasurement.Param1 = val; } void loop() { while(true) { // fire event client.HandleEvent; } } } public class Client : IClient { ICOMDevice server; public int HandleEvent() { // handle this event server.NewMeasurement(); server.SetParam1(0.0); } void loop() { while(true) { // do some stuff... server.NewMeasurement(); server.SetParam1(0.0); } } } both of the loops run in independent threads. when server.NewMeasurement() is called, the object on the server is set to a new instance. but in the next function, the object is null again. do the same when handling the server-event, it works perfectly, because the method runs in the servers thread. how to make it work from client-thread as well. as the client is meant to be working with the real device, i cannot modify the interfaces given by the manufactor. also i need to setup measurements independent from the event-handler, which will be fired not regulary. i assume this problem related to multithreaded-COM behavior but i found nothing on this topic.

  Read the article

• continueTrackingWithTouch: withEvent: not being called continuously.

  - by Steven Noyes

  I have a very simply subclass of UIButton that will fire off a custom event when the button has been held for 2 seconds. To accomplish this, I overrode: // // Mouse tracking // - (BOOL)beginTrackingWithTouch:(UITouch *)touch withEvent:(UIEvent *)event { [super beginTrackingWithTouch:touch withEvent:event]; [self setTimeButtonPressed:[NSDate date]]; return (YES); } - (BOOL)continueTrackingWithTouch:(UITouch *)touch withEvent:(UIEvent *)event { [super continueTrackingWithTouch:touch withEvent:event]; if ([[self timeButtonPressed] timeIntervalSinceNow] > 2.0) { // // disable the button. This will eventually fire the event // but this is just stubbed to act as a break point area. // [self setEnabled:NO]; [self setSelected:NO]; } return (YES); } My problem is (this is in the simulator, can't do on device work quite yet) "continueTrackingWithTouch: withEvent:" is not being called unless the mouse is actually moved. It does not take much motion, but it does take some motion. By returning "YES" in both of these, I should be setup to receive continuous events. Is this an oddity of the simulator or am I doing something wrong? NOTE: userInteractionEnabled is set to YES. NOTE2: I could setup a timer in beginTrackingWithTouch: withEvent: but that seems like more effort for something that should be simple.

  Read the article

• Help with implementing signal handlers via signal()

  - by scott

  void main () { int c; signal (SIGINT, Handle); while (( c = getchar()) != '\n' ); return(); } void Handle(signum) { signal {SIGINT, Handle); printf ("beep \n"); } I thought it would print 'beep' until any key has been pressed but the method call is outside the loop? :S

  Read the article

• Ruby ICalendar Gem: How to get e-mail reminders working.

  - by Jenny

  I'm trying to work out how to use the icalendar ruby gem, found at: http://icalendar.rubyforge.org/ According to their tutorial, you do something like: cal.event.do # ...other event properties alarm do action "EMAIL" description "This is an event reminder" # email body (required) summary "Alarm notification" # email subject (required) attendees %w(mailto:[email protected] mailto:[email protected]) # one or more email recipients (required) add_attendee "mailto:[email protected]" remove_attendee "mailto:[email protected]" trigger "-PT15M" # 15 minutes before add_attach "ftp://host.com/novo-procs/felizano.exe", {"FMTTYPE" => "application/binary"} # email attachments (optional) end alarm do action "DISPLAY" # This line isn't necessary, it's the default summary "Alarm notification" trigger "-P1DT0H0M0S" # 1 day before end alarm do action "AUDIO" trigger "-PT15M" add_attach "Basso", {"VALUE" => ["URI"]} # only one attach allowed (optional) end So, I am doing something similar in my code. def schedule_event puts "Scheduling an event for " + self.title + " at " + self.start_time start = self.start_time endt = self.start_time title = self.title desc = self.description chan = self.channel.name # Create a calendar with an event (standard method) cal = Calendar.new cal.event do dtstart Program.convertToDate(start) dtend Program.convertToDate(endt) summary "Want to watch" + title + "on: " + chan + " at: " + start description desc klass "PRIVATE" alarm do action "EMAIL" description desc # email body (required) summary "Want to watch" + title + "on: " + chan + " at: " + start # email subject (required) attendees %w(mailto:[email protected]) # one or more email recipients (required) trigger "-PT25M" # 25 minutes before end end However, I never see any e-mail sent to my account... I have even tried hard coding the start times to be Time.now, and sending them out 0 minutes before, but no luck... Am I doing something glaringly wrong?

  Read the article

• Flex 3 Close UrlLoader throws exception

  - by gmoniey

  I am trying to simulate a 'HEAD' method using UrlLoader; essentially, I just want to check for the presence of a file without downloading the entire thing. I figured I would just use HttpStatusEvent, but the following code throws an exception (one that I can't wrap in a try/catch block) when you run in debug mode. <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" initialize="init()"> <mx:Script> <![CDATA[ private static const BIG_FILE:String = "http://www.archive.org/download/gspmovvideotestIMG0021mov/IMG_0021.mov"; private var _loader:URLLoader; private function init():void { _loader = new URLLoader(); _loader.addEventListener(HTTPStatusEvent.HTTP_STATUS, statusHandler); _loader.addEventListener(IOErrorEvent.IO_ERROR, errorHandler); _loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, errorHandler); _loader.load(new URLRequest(BIG_FILE)); } public function unload():void { try { _loader.close(); _loader.removeEventListener(HTTPStatusEvent.HTTP_STATUS, statusHandler); _loader.removeEventListener(IOErrorEvent.IO_ERROR, errorHandler); _loader.removeEventListener(SecurityErrorEvent.SECURITY_ERROR, errorHandler); } catch(error:Error) { status.text = error.message; } } private function errorHandler(event:Event):void { status.text = "error"; unload(); } private function statusHandler(event:HTTPStatusEvent):void { if(event.status.toString().match(/^2/)) { status.text = "success"; unload(); } else { errorHandler(event); } } ]]> </mx:Script> <mx:Label id="status" /> I tried using ProgressEvents instead, but it seems that some 404 pages return content, so the status event will correctly identify if the page exists. Anyone have any ideas?

  Read the article

• How to scroll the horizontal scrollbar in an iFrame from the parent frame?

  - by Mohammad

  Is there any cross browser way to scroll the horizontal scroll bar of an IFrame with super wide content with Javascript inside the parent frame. Also I need it to be attached to the mouse wheel event. This is what I have so far, it's a bit copy and paste at the moment and doesn't work unfortunately. //var myIframe = document.getElementById('iframeWithWideContent'); //myIframe.onload = function (myIframe) { var mouseWheelEvt = function (e){ var event = e || window.event; if (document.body.doScroll){ document.body.doScroll(event.wheelDelta>0?"left":"right"); }else if ((event.wheelDelta || event.detail) > 0){ document.body.scrollLeft -= 10; }else{ document.body.scrollLeft += 10; } return false; } if ("onmousewheel" in document.body){ document.body.onmousewheel = mouseWheelEvt; }else{ document.body.addEventListener("DOMMouseScroll", mouseWheelEvt); } //}? I probably should uncomment that code, replace document.body with myIframe though I wouldn't know what I'm doing wrong. Demo on JSBIN link fixed Any help from you JavaScript Lords would be very appreciated. Thank you!

  Read the article

• Handling downloads in Java

  - by Tereno

  Hi there, How would I be able to handle downloads using HttpResponse in Java? I made an HttpGet request to a specific site - the site returns the file to be downloaded. How can I handle this download? InputStream doesn't seem to be able to handle it (or maybe I'm using it the wrong way.)

  Read the article

• Access a view inside a tab navigator when a tab is clicked

  - by magnus.lassi

  Hi, I I have a view in Flex 3 where I use a tab navigator and a number of views inside the tab navigator. I need to be know which view was clicked because of it's one specific view then I need to take action, i.e. if view with id "secondTab" is clicked then do something. I have set it up to be notified, my problem is that I need to be able to know what view it is. Calling tab.GetChildByName or a similar method seems to only get me back a TabSkin object. <?xml version="1.0" encoding="utf-8"?> <mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" xmlns:local="*" creationComplete="onCreationComplete(event)"> <mx:Script> <![CDATA[ import mx.events.FlexEvent; import mx.controls.Button; protected function onCreationComplete(event:Event):void { for(var i:int = 0; i < myTN.getChildren().length; i++) { var tab:Button = myTN.getTabAt(i); tab.addEventListener(FlexEvent.BUTTON_DOWN, tabClickHandler); } } private function tabClickHandler(event:FlexEvent):void { var tab:Button; if(event.currentTarget is Button) { tab = event.currentTarget as Button; // how do I access the actual view hosted in a tab that was clicked? } } ]]> </mx:Script> <mx:TabNavigator id="myTN"> <local:ProductListView id="firstTab" label="First Tab" width="100%" height="100%" /> <local:ProductListView id="secondTab" label="Second Tab" width="100%" height="100%" /> </mx:TabNavigator> </mx:VBox>

  Read the article

• Handles and pointer to object

  - by Tony

  I have a python Interpreter written in C++, the PyRun_String function from the Python API is said to return a handle, however in my code I have it assigned to pointer to a PyObject? PyObject* presult = PyRun_String(code, parse_mode, dict, dict); Is this actually correct? Can you implicitly cast this handle to this object pointer? Should it not be a HANDLE instead?

  Read the article

• Intercepting hyperlinks in an embedded Word document

  - by Ryan

  Hello, I'm working on an app which uses embedded Word documents. We have a feature which allows them to insert a small clickable image into the doc - when the user clicks on it, we want the app to open another window based on some data specified by the user when the image was added. What the application does now is: When the image is inserted, the app creates a hyperlink for it and the data is used as the link destination The user ctrl+clicks on the image and the Word document the WindowSelectionChange event The app handles the WindowSelectionChange event and goes to open the specified window This approach worked fine with previous versions, when we had the 11.0 / Word 2003 interop dll's. We upgraded to 12.0/Word 2007 for the upcoming release, and in many cases the event is not firing when I click on the image - sometimes it does, sometimes it doesn't, and I'm descending into the cargo-cult world trying to figure out why - sometimes saving and re-opening the document works, sometimes killing the Word process and starting a new one fixes (or breaks) the feature. My guess is there's something going wrong with the WinSelChg event, but I'm not sure what. The usual process we have for applying the event handler is: try //remove the old one if any { ((Document)myAXFramerControl.ActiveDocument).Application.WindowSelectionChange -= new ApplicationEvents4_WindowSelectionChangeEventHandler(WSC_eventhandlerfunction); } catch{} ((Document)myAXFramerControl.ActiveDocument).Application.WindowSelectionChange += new ApplicationEvents4_WindowSelectionChangeEventHandler(WSC_eventhandlerfunction); Sometimes one or both of these will throw exceptions - usually a NullReferenceException when removing the handler. Adding the handler sometimes throws the "com object that has been separated from its underlying rcw cannot be used" exception, which I don't understand at all - my impression was that this only occurs when you, say, store a reference to the Word application or document and try to use it later. As it stands the WSC event handler is frequently never run; while I'm happy to fiddle with the app until it works once I can't really expect the same of the users who have been happily using this feature for a while now. Any ideas?

  Read the article

• how to word wrap, align text like the output of man?

  - by cody

  what is the command that word wraps and justifies a text file so that the output looks like that of a man page: All of these system calls are used to wait for state changes in a child of the calling process, and obtain information about the child whose state has changed. A state change is considered to be: the child terminated; the child was stopped by a signal; or the child was resumed by a signal. In the case of a terminated child, performing a wait allows the system to release the resources associated with the child; if a wait is not performed, then the termi- nated child remains in a "zombie" state (see NOTES below). Thanks.

  Read the article

• Need to get back form controls' information externally

  - by Tom

  Are there any tutorials or guides out there that anyone knows of that will show me how to read forms from an external program and get back information about the controls on the form? Currently, I can get the handle to the form, and I can get the class name, but I need to get more information such as a persistent name and contained data. Thanks. Edit: I now have a way to read the contained data (with the WM_GETTEXT message), however, I still need a persistent name/ID that I can be sure will not change from instance to instance. One way I can think of for doing this is to take the handle, find the position of the control on the window, and then get the handle from the position from then on. Another way is to determine a static ID for the control and then use that to get the handle from then on. The new scope of my problem is how to implement either of these. Any Ideas?

  Read the article

• Modeling a Generic Relationship (expressed in C#) in a Database

  - by StevenH

  This is most likely one for all you sexy DBAs out there: How would I effieciently model a relational database whereby I have a field in an "Event" table which defines a "SportType"? This "SportsType" field can hold a link to different sports tables E.g. "FootballEvent", "RubgyEvent", "CricketEvent" and "F1 Event". Each of these Sports tables have different fields specific to that sport. My goal is to be able to genericly add sports types in the future as required, yet hold sport specific event data (fields) as part of my Event Entity. Is it possible to use an ORM such as NHibernate / Entity framework / DataObjects.NET which would reflect such a relationship? I have thrown together a quick C# example to express my intent at a higher level: public class Event<T> where T : new() { public T Fields { get; set; } public Event() { EventType = new T(); } } public class FootballEvent { public Team CompetitorA { get; set; } public Team CompetitorB { get; set; } } public class TennisEvent { public Player CompetitorA { get; set; } public Player CompetitorB { get; set; } } public class F1RacingEvent { public List<Player> Drivers { get; set; } public List<Team> Teams { get; set; } } public class Team { public IEnumerable<Player> Squad { get; set; } } public class Player { public string Name { get; set; } public DateTime DOB { get; set;} }

  Read the article

• What is the best way to save the environment from before an alarm handler goes off when the alarm do

  - by EpsilonVector

  I'm trying to implement user threads on a 2.4 Linux kernel (homework) and the trick for context switch seems to be using an alarm that goes off every x milliseconds and sends us to an alarm handler from which we can longjmp to the next thread. What I'm having difficulties with is figuring out how to save the environment to return to later. Basically I have an array of jmp_buffs, and every time a "context switch" using the alarm happens I want to save the previous context to the appropriate entry of the array and longjmp to the next one. However, just the fact that I need to do this from the event handler means that just using setjmp in the event handler won't give me exactly the kind of environment I want (as far as stack and program counter are involved) because the stack has the event handler call in it and the pc is in the event handler. I suppose I can look at the stack and alter it to fit my needs, but that feels a bit cumbersome. Another idea I had is to somehow pass the environment before the jump to event handler as a parameter to the event handler, but I can't figure out if this is possible. So I guess my question is- how do I do this right?

  Read the article

• CAsyncSocket and ThreadPool problem

  - by zabulus

  I have a server application with such structure: There is one object, call him Server, that in endless cycle listens and accepts connections. I have descendant class from CAsyncSocket, that has overriden event OnReceive, call him ProxySocket. Also I have a thread pool with early created threads. When connection is received by server object he accepts the new connection on the new object ProxySocket. When data arrives to the ProxySocket, he creates a command object and gives it to thread pool. In this command object I giving the socket handle of a ProxySocket. When new object of command is creating - I creating a new Socket in working thread and attach handle to it. My issue is next: When command ends, socket doesn't close, I just detach handle it and set CSocket handle to INVALID_SOCKET value, as planned. But my first ProxySocket object doesn't receives messages of new data receiving after that. How can I solve this?

  Read the article

• PHP Mcrypt - Encrypting / Decrypting file

  - by whitman6732

  Trying to write a couple of functions that will encrypt or decrypt a file and am using the class found here to try and accomplish this: http://www.itnewb.com/v/PHP-Encryption-Decryption-Using-the-MCrypt-Library-libmcrypt The encryption function below seems to work, in that it appears to encrypt the file and place it in the intended directory. I'm trying to decrypt the file now, and it just dies with the message "Failed to complete decryption" (which is coded in there...) There's nothing in the php error logs, so I'm not sure why it's failing, but as mcrypt is entirely new to me, I'm more than inclined to believe I'm doing something wrong here... Here are the functions: //ENCRYPT FILE function encryptFile() { global $cryptastic; $pass = PGPPASS; $salt = PGPSALT; $key = $cryptastic->pbkdf2($pass, $salt, 1000, 32) or die("Failed to generate secret key."); if ($handle = opendir(PATH.'/ftpd')) { while (false !== ($file = readdir($handle))) { if ($file != "." && $file != "..") { $newfile = PATH.'/encrypted/'.$file.'.txt'; $msg = file_get_contents(PATH.'/ftpd/'.$file); $encrypted = $cryptastic->encrypt($msg, $key) or die("Failed to complete encryption."); $nfile = fopen($newfile, 'w'); fwrite($nfile, $encrypted); fclose($nfile); unlink(PATH.'/ftpd/'.$file); } } closedir($handle); } //DECRYPT FILE function inFTP() { global $cryptastic; $pass = PGPPASS; $salt = PGPSALT; $key = $cryptastic->pbkdf2($pass, $salt, 1000, 32) or die("Failed to generate secret key."); if ($handle = opendir(PATH.'/encrypted')) { while (false !== ($file = readdir($handle))) { if ($file != "." && $file != "..") { $newfile = PATH.'/decrypted/'.$file; $msg = PATH.'/encrypted/'.$file; $decrypted = $cryptastic->decrypt($msg, $key) or die("Failed to complete decryption."); $nfile = fopen($newfile, 'w'); fwrite($nfile, $decrypted); fclose($nfile); //unlink(PATH.'/encrypted/'.$file); } } closedir($handle); } //$crypt->decrypt($file); }

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >