Search Results

Search found 559 results on 23 pages for 'lm sensors'.

Page 21/23 | < Previous Page | 17 18 19 20 21 22 23  | Next Page >

  • "Use of uninitialised value" despite of memset

    - by Framester
    Hi there, I allocate a 2d array and use memset to fill it with zeros. #include<stdio.h> #include<string.h> #include<stdlib.h> void main() { int m=10; int n =10; int **array_2d; array_2d = (int**) malloc(m*sizeof(int*)); if(array_2d==NULL) { printf("\n Could not malloc 2d array \n"); exit(1); } for(int i=0;i<m;i++) { ((array_2d)[i])=malloc(n*sizeof(int)); memset(((array_2d)[i]),0,sizeof(n*sizeof(int))); } for(int i=0; i<10;i++){ for(int j=0; j<10;j++){ printf("(%i,%i)=",i,j); fflush(stdout); printf("%i ", array_2d[i][j]); } printf("\n"); } } Afterwards I use valgrind [1] to check for memory errors. I get following error: Conditional jump or move depends on uninitialised value(s) for line 24 (printf("%i ", array_2d[i][j]);). I always thought memset is the function to initialize arrays. How can I get rid off this error? Thanks! Valgrind output: ==3485== Memcheck, a memory error detector ==3485== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==3485== Using Valgrind-3.5.0-Debian and LibVEX; rerun with -h for copyright info ==3485== Command: ./a.out ==3485== (0,0)=0 (0,1)===3485== Use of uninitialised value of size 4 ==3485== at 0x409E186: _itoa_word (_itoa.c:195) ==3485== by 0x40A1AD1: vfprintf (vfprintf.c:1613) ==3485== by 0x40A8FFF: printf (printf.c:35) ==3485== by 0x8048724: main (playing_with_valgrind.c:39) ==3485== ==3485== ==3485== ---- Attach to debugger ? --- [Return/N/n/Y/y/C/c] ---- ==3485== Conditional jump or move depends on uninitialised value(s) ==3485== at 0x409E18E: _itoa_word (_itoa.c:195) ==3485== by 0x40A1AD1: vfprintf (vfprintf.c:1613) ==3485== by 0x40A8FFF: printf (printf.c:35) ==3485== by 0x8048724: main (playing_with_valgrind.c:39) [1] valgrind --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes --db-attach=yes ./a.out [gcc-cmd] gcc -std=c99 -lm -Wall -g3 playing_with_valgrind.c

    Read the article

  • mysql timeout - c/C++

    - by user1262876
    Guys i'm facing a problem with this code, the problem is the timeout by timeout i mean the time it takes the program to tell me if the server is connected or not. If i use my localhost i get the answer fast, but when i connect to outside my localhost it takes 50sc - 1.5 min to response and the program frezz until it done. HOw can i fix the frezzing, or make my own timeout, like if still waiting after 50sc, tell me connection failed and stop? please use codes as help, becouse i would understand it better, thanks for any help i get PS: USING MAC #include "mysql.h" #include <stdio.h> #include <stdlib.h> // Other Linker Flags: -lmysqlclient -lm -lz // just going to input the general details and not the port numbers struct connection_details { char *server; char *user; char *password; char *database; }; MYSQL* mysql_connection_setup(struct connection_details mysql_details) { // first of all create a mysql instance and initialize the variables within MYSQL *connection = mysql_init(NULL); // connect to the database with the details attached. if (!mysql_real_connect(connection,mysql_details.server, mysql_details.user, mysql_details.password, mysql_details.database, 0, NULL, 0)) { printf("Conection error : %s\n", mysql_error(connection)); exit(1); } return connection; } MYSQL_RES* mysql_perform_query(MYSQL *connection, char *sql_query) { // send the query to the database if (mysql_query(connection, sql_query)) { printf("MySQL query error : %s\n", mysql_error(connection)); exit(1); } return mysql_use_result(connection); } int main() { MYSQL *conn; // the connection MYSQL_RES *res; // the results MYSQL_ROW row; // the results row (line by line) struct connection_details mysqlD; mysqlD.server = (char*)"Localhost"; // where the mysql database is mysqlD.user = (char*)"root"; // the root user of mysql mysqlD.password = (char*)"123456"; // the password of the root user in mysql mysqlD.database = (char*)"test"; // the databse to pick // connect to the mysql database conn = mysql_connection_setup(mysqlD); // assign the results return to the MYSQL_RES pointer res = mysql_perform_query(conn, (char*) "SELECT * FROM me"); printf("MySQL Tables in mysql database:\n"); while ((row = mysql_fetch_row(res)) !=NULL) printf("%s - %s\n", row[0], row[1], row[2]); // <-- Rows /* clean up the database result set */ mysql_free_result(res); /* clean up the database link */ mysql_close(conn); return 0; }

    Read the article

  • Websphere federated repository for Active Directory

    - by Drakiula
    Hi, What I am trying to achieve is to have Websphere 6.1 use Active Directory users authentication. Websphere is running on Windows 2008 R2. What I've done already: Succesfully setup a federated repository for Windows Active Directory (LDAP); Create a realm definition for the federated repository previously defined; Set the realm definition as the current real definition. Stop the Websphere service. When I attempt to start the Websphere service again, it crashes with the following stacktrace: ------Start of DE processing------ = [9/3/10 2:36:14:133 PDT] , key = com.ibm.websphere.security.EntryNotFoundException com.ibm.ws.security.registry.UserRegistryImpl.createCredential 824 Exception = com.ibm.websphere.security.EntryNotFoundException Source = com.ibm.ws.security.registry.UserRegistryImpl.createCredential probeid = 824 Stack Dump = com.ibm.websphere.wim.exception.EntityNotFoundException: CWWIM4001E The 'null' entity was not found. at com.ibm.ws.wim.registry.util.UniqueIdBridge.getUniqueUserId(UniqueIdBridge.java:233) at com.ibm.ws.wim.registry.WIMUserRegistry$6.run(WIMUserRegistry.java:351) at com.ibm.ws.wim.security.authz.jacc.JACCSecurityManager.runAsSuperUser(JACCSecurityManager.java:500) at com.ibm.ws.wim.security.authz.ProfileSecurityManager.runAsSuperUser(ProfileSecurityManager.java:964) at com.ibm.ws.wim.registry.WIMUserRegistry.getUniqueUserId(WIMUserRegistry.java:340) at com.ibm.ws.security.registry.UserRegistryImpl.createCredential(UserRegistryImpl.java:750) at com.ibm.ws.security.ltpa.LTPAServerObject.authenticate(LTPAServerObject.java:776) at com.ibm.ws.security.server.lm.ltpaLoginModule.login(ltpaLoginModule.java:453) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at javax.security.auth.login.LoginContext.invoke(LoginContext.java:795) at javax.security.auth.login.LoginContext.access$000(LoginContext.java:209) at javax.security.auth.login.LoginContext$4.run(LoginContext.java:709) at java.security.AccessController.doPrivileged(AccessController.java:246) at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:706) at javax.security.auth.login.LoginContext.login(LoginContext.java:603) at com.ibm.ws.security.auth.JaasLoginHelper.jaas_login(JaasLoginHelper.java:376) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3513) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3306) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3086) at com.ibm.ws.security.auth.ContextManagerImpl.getServerSubjectInternal(ContextManagerImpl.java:2180) at com.ibm.ws.security.auth.ContextManagerImpl.getServerSubjectInternal(ContextManagerImpl.java:1972) at com.ibm.ws.security.auth.ContextManagerImpl.initialize(ContextManagerImpl.java:2530) at com.ibm.ws.security.auth.ContextManagerImpl.initialize(ContextManagerImpl.java:2560) at com.ibm.ws.security.core.SecurityContext.enable(SecurityContext.java:83) at com.ibm.ws.security.core.distSecurityComponentImpl.initialize(distSecurityComponentImpl.java:379) at com.ibm.ws.security.core.distSecurityComponentImpl.startSecurity(distSecurityComponentImpl.java:336) at com.ibm.ws.security.core.SecurityComponentImpl.startSecurity(SecurityComponentImpl.java:105) at com.ibm.ws.security.core.ServerSecurityComponentImpl.start(ServerSecurityComponentImpl.java:283) at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:977) at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:673) at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:197) at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:977) at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:673) at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:526) at com.ibm.ws.runtime.WsServerImpl.bootServerContainer(WsServerImpl.java:192) at com.ibm.ws.runtime.WsServerImpl.start(WsServerImpl.java:140) at com.ibm.ws.runtime.WsServerImpl.main(WsServerImpl.java:461) at com.ibm.ws.runtime.WsServer.main(WsServer.java:59) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at com.ibm.wsspi.bootstrap.WSLauncher.launchMain(WSLauncher.java:183) at com.ibm.wsspi.bootstrap.WSLauncher.main(WSLauncher.java:90) at com.ibm.wsspi.bootstrap.WSLauncher.run(WSLauncher.java:72) at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336) at org.eclipse.core.launcher.Main.basicRun(Main.java:280) at org.eclipse.core.launcher.Main.run(Main.java:977) at com.ibm.wsspi.bootstrap.WSPreLauncher.launchEclipse(WSPreLauncher.java:329) at com.ibm.wsspi.bootstrap.WSPreLauncher.main(WSPreLauncher.java:92) Dump of callerThis = Object type = com.ibm.ws.security.registry.UserRegistryImpl com.ibm.ws.security.registry.UserRegistryImpl@68a068a0 Anybody maybe has a hint on this? I followed the exact steps described in the IBM Infocenter for setting this up. Thanks in advance for the help.

    Read the article

  • Windows 7 Samba issue

    - by abduls85
    We have a strange samba issue affecting only one user. Our samba setup is as follow : Red Hat Enterprise Linux Server release 5.4 (Tikanga) - Samba Server Samba version 3.0.33-3.14.el5 - Samba version Domain Controller WIN2008R2 Standard - Windows DC Windows 7 64 bit - Client PCs User mentioned that he faced this problem after he force shutdown his PC few weeks ago. By right, for all users when we access \\sambaservername in windows it will show all the shares in the samba server but for this user once he startup his PC he will not be able to access \\sambaservername, Error message Windows cannot access \\sambaservername Current workaround to solve the problem : Try to access one share in \\sambaservername for instance \\sambaservername\sharedfolder1. But even when doing so, it will first prompt an error in the beginning, error message is as follows Logon failure: unknown user name or bad password. user need to enter the credentials again and he can access the share. Thereafter, he will be able to access \\sambaservername without any issues. But once he reboots his computer the problem will persists. Troubleshooting done so far: Ensure the following settings: Go to: Control Panel → Administrative Tools → Local Security Policy Select: Local Policies → Security Options "Network security: LAN Manager authentication level" → Send LM & NTLM responses "Minimum session security for NTLM SSP" → uncheck: Require 128-bit encryption Advise user to reset his password and try again but problem still persists Tried my account on users' PC, there is no issues. Tried user account on serveral other Windows 7 PC including mine but problem still persists. Windows XP does not have this problem. Ensure that there is no stored crendentials on the windows 7 PC. Checked the credentials manager in Control Panel as well as typing this command rundll32.exe keymgr.dll, KRShowKeyMgr Restart winbindd daemon on samba server but to no avail. I suspect this is due to some caching issue but not sure where is the issue. Whenever the user has error accessing \\sambaservername, the following errors will be logged in the samba server : [2012/10/10 17:10:26, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! But after workaround, there will be no more errors. I suspect after reading the article listed below some amendments need to be made to the \var\samba\cache directory : http://www.linuxquestions.org/questions/linux-server-73/getent-passwd-dont-show-ad-groups-and-users-745829/ http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/tdb.html http://lists.samba.org/archive/samba/2010-May/155521.html http://lists.samba.org/archive/samba/2011-March/161912.html http://lzeit.blogspot.sg/2009/10/samba-shares-inaccessible-after-power.html There are several users using the samba server and i would like to solve this problem without any impacts. I saw the following article : http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#WINBINDCACHETIME "winbind offline logon (G) This parameter is designed to control whether Winbind should allow to login with the pam_winbind module using Cached Credentials. If enabled, winbindd will store user credentials from successful logins encrypted in a local cache. Default: winbind offline logon = false Example: winbind offline logon = true " Any idea on how to delete the entry for one user in the local cache ?

    Read the article

  • Apache logs 200 instead of 404

    - by elle
    I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

    Read the article

  • Bash can't start a programme that's there and has all the right permissions

    - by Rory
    This is a gentoo server. There's a programme prog that can't execute. (Yes the execute permission is set) About the file $ ls prog $ ./prog bash: ./prog: No such file or directory $ file prog prog: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.2.5, dynamically linked (uses shared libs), not stripped $ pwd /usr/local/bin $ /usr/local/bin/prog bash: /usr/local/bin/prog: No such file or directory $ less prog | head ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel 80386 Version: 0x1 I have a fancy less, to show that it's an actual executable, here's some more data: $ xxd prog |head 0000000: 7f45 4c46 0101 0100 0000 0000 0000 0000 .ELF............ 0000010: 0200 0300 0100 0000 c092 0408 3400 0000 ............4... 0000020: 0401 0a00 0000 0000 3400 2000 0700 2800 ........4. ...(. 0000030: 2600 2300 0600 0000 3400 0000 3480 0408 &.#.....4...4... 0000040: 3480 0408 e000 0000 e000 0000 0500 0000 4............... 0000050: 0400 0000 0300 0000 1401 0000 1481 0408 ................ 0000060: 1481 0408 1300 0000 1300 0000 0400 0000 ................ 0000070: 0100 0000 0100 0000 0000 0000 0080 0408 ................ 0000080: 0080 0408 21f1 0500 21f1 0500 0500 0000 ....!...!....... 0000090: 0010 0000 0100 0000 40f1 0500 4081 0a08 ........@...@... and $ ls -l prog -rwxrwxr-x 1 1000 devs 725706 Aug 6 2007 prog $ ldd prog not a dynamic executable $ strace ./prog 1249403877.639076 execve("./prog", ["./prog"], [/* 27 vars */]) = -1 ENOENT (No such file or directory) 1249403877.640645 dup(2) = 3 1249403877.640875 fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE) 1249403877.641143 fstat(3, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 1249403877.641484 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3b8954a000 1249403877.641747 lseek(3, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) 1249403877.642045 write(3, "strace: exec: No such file or dir"..., 40strace: exec: No such file or directory ) = 40 1249403877.642324 close(3) = 0 1249403877.642531 munmap(0x2b3b8954a000, 4096) = 0 1249403877.642735 exit_group(1) = ? About the server FTR the server is a xen domU, and the programme is a closed source linux application. This VM is a copy of another VM that has the same root filesystem (including this programme), that works fine. I've tried all the above as root and same problem. Did I mention the root filesystem is mounted over NFS. However it's mounted 'defaults,nosuid', which should include execute. Also I am able to run many other programmes from that mounted drive /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 1 cpu MHz : 2992.692 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu tsc msr pae mce cx8 apic mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogmips : 5989.55 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Example of a file that I can run I can run other programmes on that mounted filesystem on that server. For example: $ ls -l ls -rwxr-xr-x 1 root root 105576 Jul 25 17:14 ls $ file ls ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped $ ./ls attr cat cut echo getfacl ln more ... (you get the idea) ... rmdir sort tty $ less ls | head ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1

    Read the article

  • Random Slow Response

    - by ARehman
    We have an ASP.NET MVC 1.0 application running on Windows Server 2008 – Standard (32 –bit), Dual Core Xeon (3.0 GHz), 2 G.B R.A.M. Most of the times application renders response in 3-4 seconds, but sometimes users get very late response and delay is up to 40 seconds or more than a minute. It happens in following way: User browsed a page, idle for 5, 10 or 15 minutes, tried to browse same page or some other. Now, there is a chance that he will see late response whereas the app pool is still up and running. This can happen with any arbitrary page. We have tried followings/observations. Moved the application to stand alone web server App Pool idle shutdown time is 60 minutes. There are no abrupt shut downs/restarts. CPU or memory doesn’t spike. No delays in SQL queries. Modified App Pool setting to run in classic-mode. It didn’t help. Plugged-in custom module to log all those requests which took more than 5 seconds to complete. It didn’t pick any request of interest. Enabled ‘Failed Request Tracing’ to log all those requests which take 20 or more seconds to complete. It didn’t log anything. Event Viewer, HTTPER log, W3SVC logs or WAS logs don’t indicate anything. HTTPERR only has ‘_ _ Timer_ConnectionIdle _ _’ entries. There is not much traffic to server. This can happen also if only two users are active. Next we captured TCP/IP terrific on both a user and server end with Wireshark and below are details in brief of this slowness: Browser sends a request for ~/User/Home/ (GET Request) by setting up a receiving end point using port 'wlbs(port-2504)'. I'm not sure if this could be a problem in some way that browser didn't hand-shake with the server first and assumed that last connection is still open, whereas, I browsed the same page 4 minutes ago and didn't perform any activity with site after that. If I see the HTTPERR log, it indicates that it has ‘_ _ Timer_ConnectionIdle _ _ _’ entry for my last activity with server. Browser (I was using Chrome) waits for any response from the server, doesn’t find any then starts retransmitting the same request using same end point after incrementing wait intervals, e.g. after 8, 18, 29, 40, 62, and 92 seconds. All these GET requests were received by server as well. But, server didn’t send any packet to client. Browser didn't see any response on the end point it set up in point 1, it opened a new end point 'optiwave-lm (port-2524)', did a hand shake with the server and transmitted the same request again. Server received, processed it, and returned successful response. What happened to earlier 6-7 requests? Whether they were passed on to HTTP.SYS or not? Why Failed Request Tracing not logged anything, we didn't find any clue yet. Server served the same page successfully just 4 minutes ago. Looking forward for more suggestions/solutions. -- Thanks

    Read the article

  • Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

    - by Fantomas
    Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

    Read the article

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Thursday Community Keynote: "By the Community, For the Community"

    - by Janice J. Heiss
    Sharat Chander, JavaOne Community Chairperson, began Thursday's Community Keynote. As part of the morning’s theme of "By the Community, For the Community," Chander noted that 60% of the material at the 2012 JavaOne conference was presented by Java Community members. "So next year, when the call for papers starts, put-in your submissions," he urged.From there, Gary Frost, Principal Member of Technical Staff, AMD, expanded upon Sunday's Strategy Keynote exploration of Project Sumatra, an OpenJDK project targeted at bringing Java to heterogeneous computing platforms (which combine the CPU and the parallel processor of the GPU into a single piece of silicon). Sumatra entails enhancing the JVM to make maximum use of these advanced platforms. Within this development space, AMD created the Aparapi API, which converts Java bytecode into OpenCL for execution on such GPU devices. The Aparapi API was open sourced in September 2011.Whether it was zooming-in on a Mandelbrot set, "the game of life," or a swarm of 10,000 Dukes in a space-bound gravitational dance, Frost's demos, using an Aparapi/OpenCL implementation, produced stunningly faster display results. He indicated that the Java 9 timeframe is where they see Project Sumatra coming to ultimate fruition, employing the Lamdas of Java 8.Returning to the theme of the keynote, Donald Smith, Director, Java Product Management, Oracle, explored a mind map graphic demonstrating the importance of Community in terms of fostering innovation. "It's the sharing and mixing of culture, the diversity, and the rapid prototyping," he said. Within this topic, Smith, brought up a panel of representatives from Cloudera, Eclipse, Eucalyptus, Perrone Robotics, and Twitter--ideal manifestations of community and innovation in the world of Java.Marten Mickos, CEO, Eucalyptus Systems, explored his company's open source cloud software platform, written in Java, and used by gaming companies, technology companies, media companies, and more. Chris Aniszczyk, Operations Engineering,Twitter, noted the importance of the JVM in terms of their multiple-language development environment. Mike Olson, CEO, Cloudera, described his company's Apache Hadoop-based software, support, and training. Mike Milinkovich, Executive Director, Eclipse Foundation, noted that they have about 270 tools projects at Eclipse, with 267 of them written in Java. Milinkovich added that Eclipse will even be going into space in 2013, as part of the control software on various experiments aboard the International Space Station. Lastly, Paul Perrone, CEO, Perrone Robotics, detailed his company's robotics and automation software platform built 100% on Java, including Java SE and Java ME--"on rat, to cat, to elephant-sized systems." Milinkovic noted that communities are by nature so good at innovation because of their very openness--"The more open you make your innovation process, the more ideas are challenged, and the more developers are focused on justifying their choices all the way through the process."From there, Georges Saab, VP Development Java SE OpenJDK, continued the topic of innovation and helping the Java Community to "Make the Future Java." Martijn Verburg, representing the London Java Community (winner of a Duke's Choice Award 2012 for their activity in OpenJDK and JCP), soon joined Saab onstage. Verburg detailed the LJC's "Adopt a JSR" program--"to get day-to-day developers more involved in the innovation that's happening around them."  From its London launching pad, the innovative program has spread to Brazil, Morocco, Latvia, India, and more.Other active participants in the program joined Verburg onstage--Ben Evans, London Java Community; James Gough, Stackthread; Bruno Souza, SOUJava; Richard Warburton, jClarity; and Cecelia Borg, Oracle--OpenJDK Onboarding. Together, the group explored the goals and tasks inherent in the Adopt a JSR program--from organizing hack days (testing prototype implementations), to managing mailing lists and forums, to triaging issues, to evangelism—all with the goal of fostering greater community/developer involvement, but equally importantly, building better open standards. “Come join us, and make your ecosystem better!" urged Verburg.Paul Perrone returned to profile the latest in his company's robotics work around Java--including the AARDBOTS family of smaller robotic vehicles, running the Perrone MAX platform on top of the Java JVM. Perrone took his "Rumbles" four-wheeled robot out for a spin onstage--a roaming, ARM-based security-bot vehicle, complete with IR, ultrasonic, and "cliff" sensors (the latter, for the raised stage at JavaOne). As an ultimate window into the future of robotics, Perrone displayed a "head-set" controller--a sensor directed at the forehead to monitor brainwaves, for the someday-implementation of brain-to-robot control.Then, just when it seemed this might be the end of the day's futuristic offerings, a mystery voice from offstage pronounced "I've got some toys"--proving to be guest-visitor James Gosling, there to explore his cutting-edge work with Liquid Robotics. While most think of robots as something with wheels or arms or lasers, Gosling explained, the Liquid Robotics vehicle is an entirely new and innovative ocean-going 'bot. Looking like a floating surfboard, with an attached set of underwater wings, the autonomous devices roam the oceans using only the energy of ocean waves to propel them, and a single actuated rudder to steer. "We have to accomplish all guidance just by wiggling the rudder," Gosling said. The devices offer applications from self-installing weather buoy, to pollution monitoring station, to marine mammal monitoring device, to climate change data gathering, to even ocean life genomic sampling. The early versions of the vehicle used C code on very tiny industrial micro controllers, where they had to "count the bytes one at a time."  But the latest generation vehicles, which just hit the water a week or so ago, employ an ARM processor running Linux and the ARM version of JDK 7. Gosling explained that vehicle communication from remote locations is achieved via the Iridium satellite network. But because of the costs of this communication path, the data must be sent in very small bursts--using SBD short burst data. "It costs $1/kb, so that rules everything in the software design,” said Gosling. “If you were trying to stream a Netflix video over this, it would cost a million dollars a movie. …We don't have a 'big data' problem," he quipped. There are currently about 150 Liquid Robotics vehicles out traversing the oceans. Gosling demonstrated real time satellite tracking of several vehicles currently at sea, noting that Java is actually particularly good at AI applications--due to the language having garbage collection, which facilitates complex data structures. To close-out his time onstage, Gosling of course participated in the ceremonial Java tee-shirt toss out to the audience…In parting, Chander passed the JavaOne Community Chairperson baton to Stephen Chin, Java Technology Evangelist, Oracle. Onstage in full motorcycle gear, Chin noted that he'll soon be touring Europe by motorcycle, meeting Java Community Members and streaming live via UStream--the ultimate manifestation of community and technology!  He also reminded attendees of the upcoming JavaOne Latin America 2012, São Paulo, Brazil (December 4-6, 2012), and stated that the CFP (call for papers) at the conference has been extended for one more week. "Remember, December is summer in Brazil!" Chin said.

    Read the article

  • Big Data – Is Big Data Relevant to me? – Big Data Questionnaires – Guest Post by Vinod Kumar

    - by Pinal Dave
    This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions of SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. I think the series from Pinal is a good one for anyone planning to start on Big Data journey from the basics. In my daily customer interactions this buzz of “Big Data” always comes up, I react generally saying – “Sir, do you really have a ‘Big Data’ problem or do you have a big Data problem?” Generally, there is a silence in the air when I ask this question. Data is everywhere in organizations – be it big data, small data, all data and for few it is bad data which is same as no data :). Wow, don’t discount me as someone who opposes “Big Data”, I am a big supporter as much as I am a critic of the abuse of this term by the people. In this post, I wanted to let my mind flow so that you can also think in the direction I want you to see these concepts. In any case, this is not an exhaustive dump of what is in my mind – but you will surely get the drift how I am going to question Big Data terms from customers!!! Is Big Data Relevant to me? Many of my customers talk to me like blank whiteboard with no idea – “why Big Data”. They want to jump into the bandwagon of technology and they want to decipher insights from their unexplored data a.k.a. unstructured data with structured data. So what are these industry scenario’s that come to mind? Here are some of them: Financials Fraud detection: Banks and Credit cards are monitoring your spending habits on real-time basis. Customer Segmentation: applies in every industry from Banking to Retail to Aviation to Utility and others where they deal with end customer who consume their products and services. Customer Sentiment Analysis: Responding to negative brand perception on social or amplify the positive perception. Sales and Marketing Campaign: Understand the impact and get closer to customer delight. Call Center Analysis: attempt to take unstructured voice recordings and analyze them for content and sentiment. Medical Reduce Re-admissions: How to build a proactive follow-up engagements with patients. Patient Monitoring: How to track Inpatient, Out-Patient, Emergency Visits, Intensive Care Units etc. Preventive Care: Disease identification and Risk stratification is a very crucial business function for medical. Claims fraud detection: There is no precise dollars that one can put here, but this is a big thing for the medical field. Retail Customer Sentiment Analysis, Customer Care Centers, Campaign Management. Supply Chain Analysis: Every sensors and RFID data can be tracked for warehouse space optimization. Location based marketing: Based on where a check-in happens retail stores can be optimize their marketing. Telecom Price optimization and Plans, Finding Customer churn, Customer loyalty programs Call Detail Record (CDR) Analysis, Network optimizations, User Location analysis Customer Behavior Analysis Insurance Fraud Detection & Analysis, Pricing based on customer Sentiment Analysis, Loyalty Management Agents Analysis, Customer Value Management This list can go on to other areas like Utility, Manufacturing, Travel, ITES etc. So as you can see, there are obviously interesting use cases for each of these industry verticals. These are just representative list. Where to start? A lot of times I try to quiz customers on a number of dimensions before starting a Big Data conversation. Are you getting the data you need the way you want it and in a timely manner? Can you get in and analyze the data you need? How quickly is IT to respond to your BI Requests? How easily can you get at the data that you need to run your business/department/project? How are you currently measuring your business? Can you get the data you need to react WITHIN THE QUARTER to impact behaviors to meet your numbers or is it always “rear-view mirror?” How are you measuring: The Brand Customer Sentiment Your Competition Your Pricing Your performance Supply Chain Efficiencies Predictive product / service positioning What are your key challenges of driving collaboration across your global business?  What the challenges in innovation? What challenges are you facing in getting more information out of your data? Note: Garbage-in is Garbage-out. Hold good for all reporting / analytics requirements Big Data POCs? A number of customers get into the realm of setting a small team to work on Big Data – well it is a great start from an understanding point of view, but I tend to ask a number of other questions to such customers. Some of these common questions are: To what degree is your advanced analytics (natural language processing, sentiment analysis, predictive analytics and classification) paired with your Big Data’s efforts? Do you have dedicated resources exploring the possibilities of advanced analytics in Big Data for your business line? Do you plan to employ machine learning technology while doing Advanced Analytics? How is Social Media being monitored in your organization? What is your ability to scale in terms of storage and processing power? Do you have a system in place to sort incoming data in near real time by potential value, data quality, and use frequency? Do you use event-driven architecture to manage incoming data? Do you have specialized data services that can accommodate different formats, security, and the management requirements of multiple data sources? Is your organization currently using or considering in-memory analytics? To what degree are you able to correlate data from your Big Data infrastructure with that from your enterprise data warehouse? Have you extended the role of Data Stewards to include ownership of big data components? Do you prioritize data quality based on the source system (that is Facebook/Twitter data has lower quality thresholds than radio frequency identification (RFID) for a tracking system)? Do your retention policies consider the different legal responsibilities for storing Big Data for a specific amount of time? Do Data Scientists work in close collaboration with Data Stewards to ensure data quality? How is access to attributes of Big Data being given out in the organization? Are roles related to Big Data (Advanced Analyst, Data Scientist) clearly defined? How involved is risk management in the Big Data governance process? Is there a set of documented policies regarding Big Data governance? Is there an enforcement mechanism or approach to ensure that policies are followed? Who is the key sponsor for your Big Data governance program? (The CIO is best) Do you have defined policies surrounding the use of social media data for potential employees and customers, as well as the use of customer Geo-location data? How accessible are complex analytic routines to your user base? What is the level of involvement with outside vendors and third parties in regard to the planning and execution of Big Data projects? What programming technologies are utilized by your data warehouse/BI staff when working with Big Data? These are some of the important questions I ask each customer who is actively evaluating Big Data trends for their organizations. These questions give you a sense of direction where to start, what to use, how to secure, how to analyze and more. Sign off Any Big data is analysis is incomplete without a compelling story. The best way to understand this is to watch Hans Rosling – Gapminder (2:17 to 6:06) videos about the third world myths. Don’t get overwhelmed with the Big Data buzz word, the destination to what your data speaks is important. In this blog post, we did not particularly look at any Big Data technologies. This is a set of questionnaire one needs to keep in mind as they embark their journey of Big Data. I did write some of the basics in my blog: Big Data – Big Hype yet Big Opportunity. Do let me know if these questions make sense?  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • CodePlex Daily Summary for Thursday, April 08, 2010

    CodePlex Daily Summary for Thursday, April 08, 2010New ProjectsBackUpAnyWhere: BackUpAnyWhereCustomFormbyEndUser: 在项目开发中,经常遇到不同的用户对同一报表有不同要求的情况,有时甚至用户需要从头生成一个报表,在以前可能使用第三方的开发工具来实现。在SQL Server2005中,通过使用Reporting Services可以使最终用户不通过编码,只要了解数据结构就能自行编辑报表。本例使用Adventur...DbExecutor - linq based database executor: IEnumerable based database reader. (linq like primitive sql executor)DeepZoomRenderingPack: A collection of libraries and plug-ins architecture that turns various files (like PDF, PS, etc.) into a "Visual" representation that the DeepZoom ...DotNetNuke Russian Language packs: DNNRussianLP - DotNetNuke Russian Language pack. F# Refactor: Deisgned to bring Code Refactoring capabilities to the F# Language in Visual Studio 2010. Invocando WebService e Site HTTP dinamicamente com HTTPWebRequest C#: Invocando Site HTTP e WebService dinamicamente com HTTPWebRequest Passando o SoapAction e Envelope XML Escrito em C# www.biztalkbrasil.c...Jitbit WYSWYG BBCode Editor: "Jitbit WYSIWYG-BBCode" is a browser-based JavaScript-powered WYSIWYG BBCode editorMRDS Services for Phidgets: MRDS (Microsoft Robotics Developer Studio) Services for Phidgets provides additional services for Phidgets sensors and controllers that are not inc...MSBuild Addin: This tool is a simple addin for VisualStudio 2008 used in association with Microsoft MSBuild. It allows you to run MSBuild directly inside Visual S...NISHIL-BizTalk Custom Eventlog Functiod: While testing our maps at times when it fails we cant trace it because we don’t know what the output of the functiods are. Normally in a single ma...Northest GNSG: Supinfo B3C Paris Northest University project. Galego, Neveu, Simon, Geissmann.Oily: Composite application project for oil parameters. It's developed in C#Outlook.Utility: The MSDN article Outlook Customization for Integrating with Enterprise Applications at http://msdn.microsoft.com/en-us/library/Aa479345 has quite a...Particle Plot Pivot: Scan select particle physics experiment web sites for plots and generate a Pivot display for easy browsing.project tca: project tca - translating chat application. Satisfyr: A new way of performing assertions on tests so that they remain agnostic to the underlying test framework, and leverage .NET built-in lambda syntax.sejce2008: jce se course wiki and projects linksSGB Controls: SGB Controls is a set of standard .net controls that include a number of enhancements to make life easier for the developer. These controls incl...Syringe: Syringe is a lightweight service container and dependency injection library designed for use with ASP.NET MVC2. Supported features: Dependency inj...topicbox: topicboxUr-Index: Ur-Index makes it a lot easier to create onomastic indexes for books in pdf format.VietGeeks ZohoDocApis: Implement .NET Zoho Document Apis library to help developer can intergrate Zoho Docs easy with their websitesWebometrics Dashboard: Webometrics Dashboardwebpress: It is a WebBased CMS and Blog platform.WPF Ink Canvas Toolbar: WPF Ink Canvas Toolbar makes it easy for WPF developers to use pen input in TabletPC or UMPC applications. The WPF InkCanvas control has drawing, e...WS-TMS: WS GISG HTT TMSNew ReleasesBatterySaver: Version 1.0: Fixed battery increase/decrease events not firing Fixed memory corruption error Added working set trimming (used very sparingly) Fixed poorly rende...Chargify.NET: Chargify.NET 0.65: Added in Transactions, Subscription Re-activation, and finally XML documentation (which has been missing in the previous releases).DbExecutor - linq based database executor: DbExecutor ver.1.0.0.1: renameDotNetNuke Russian Language packs: Russian Language Pack for DotNetNuke 04.09.02: Russian Language Pack for DotNetNuke 04.09.02Encrypted Notes: Encrypted Notes 1.6.3: This is the latest version of Encrypted Notes (1.6.3), with general improvements. It has an installer that will create a directory 'CPascoe' in My ...Invocando WebService e Site HTTP dinamicamente com HTTPWebRequest C#: Código projeto CallSiteHTTP: Código escrito em C#.NET 2.0 - VS2005 Contem: Solution completa(código e executável) XML de configuração - Config.xml ...Jitbit WYSWYG BBCode Editor: Main package: Contains the JS-file, CSS-file and a sample.Live Writer Picasa Plugin: Live Writer Picasa Plugin 1.1.0: Changelog Communication with Picasa Web Albums is done directly via HTTP now (v1.0.0 used Google's GData .NET Libraries) The plugin can search fo...MRDS Services for Phidgets: Phidgets for RDS 2008 R3: First Beta Release This ZIP file contains a web page called Readme_CodePlex.html that explains how to install the RDS Phidgets services for RDS 200...MSBuild Addin: MsBuildAddin-v1.0.0: Initial versionMSBuild Addin: MsBuildAddin-v1.0.0-src.zip: Initial versionOutlook.Utility: Outlook.Utility v1: I have used most of the code in previous projects and seems to be quite stable. Of course the point of open sourcing this is so this project is use...Scrum Dashboard: Scrum Dashboard v3 Alpha 1: Scrum Dashboard v3 is targeting .NET 4, TFS 2010 and the brand new Scrum for Team System v3 process templates. Most of the code has been rewritten ...SharePoint Labs: SPLab4004A-FRA-Level100: SPLab4004A-FRA-Level100 This SharePoint Lab will teach you the 4th best practice you should apply when writing code with the SharePoint API. Lab La...SharePoint Labs: SPLab5012A-FRA-Level100: SPLab5012A-FRA-Level100 This SharePoint Lab will teach you how to provision a new welcome page (how to change and rename the default.aspx page) on ...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet Source Code: Although the latest version pex and moles used with this project is not available, we thought it would be useful to provide a download to the source.Syringe: Syringe 1.0: Features Dependency injection on properties of services in container Dependency injection on constructors of services in container ASP.Net Mvc ...Text to HTML: 0.4.1.0: Cambios de la versiónOptimización del código de exportación reduciendo el código. Cambio en el icono de exportación. Añadido menú Seleccionar t...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 23: Build 23 Fix: Executing "Blame" through the Solution Explorer on a file opens TortoiseMerge rather than TortoiseBlame. Build 22 (beta) New: Visua...WPF Ink Canvas Toolbar: WPF Ink Canvas Toolbar 1.0: First release - included custom colour selectionMost Popular ProjectsRawrWBFS ManagerMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.RawrShweet: SharePoint 2010 Team Messaging built with Pexpatterns & practices – Enterprise LibraryAcadsysAutoPocoIonics Isapi Rewrite FilterNcqrs Framework - The CQRS framework for .NETFarseer Physics Engine

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • Oracle Enterprise Manager 12c Integration With Oracle Enterprise Manager Ops Center 11g

    - by Scott Elvington
    In a blog entry earlier this year, we announced the availability of the Ops Center 11g plug-in for Enterprise Manager 12c. In this article I will walk you through the process of deploying the plug-in on your existing Enterprise Manager agents and show you some of the capabilities the plug-in provides. We'll also look at the integration from the Ops Center perspective. I will show you how to set up the connection to Enterprise Manager and give an overview of the information that is available. Installing and Configuring the Ops Center Plug-in The plug-in is available for download from the Self Update page (Setup ? Extensibility ? Self Update). The plug-in name is “Ops Center Infrastructure stack”. Once you have downloaded the plug-in you can navigate to the Plug-In management page (Setup ? Extensibility ? Plug-ins) to begin deployment. The plug-in must first be deployed on the Management Server. You will need to provide the repository password of the SYS user in order to deploy the plug-in to the Management Server. There are a few pre-requisites that need to be completed on the Ops Center side before the plug-in can be deployed and configured on the desired Enterprise Manager agents. Any servers, whether physical or virtual, for which you wish to see metrics and alerts need to be managed by Ops Center. This means that the Operating System needs to have an Ops Center management agent installed as a minimum. The plug-in can provide even more value when Ops Center is also managing the other “layers of the stack”, for example the service processor, the blade chassis or the XSCF of an M-Series server. The more information that Ops Center has about the stack, the more information that will be visible within Enterprise Manager via the plug-in. In order to access the information within Ops Center, the plug-in requires a user to connect as. This user does not require any particular Ops Center permissions or roles, it simply needs to exist. You can create a specific “EMPlugin” user within Ops Center or use an existing user. Oracle recommends creating a specific, non-privileged user account within Ops Center for this purpose. From the Ops Center Administration section, select Enterprise Controller, click the Users tab and finally click the Add User icon to create the desired user account. For the purpose of this article I have discovered and managed the OS and service processor of the server where my Enterprise Manager 12c installation is hosted. With the plug-in deployed to the Management Server and the setup done within Ops Center, we're now ready to deploy the plug-in to the agents and configure the targets to communicate with the Ops Center Enterprise Controller. From the Setup menu select Add Targets then Add Targets Manually. Select the bottom radio button “Add Targets Manually by Specifying Target Monitoring Properties”, select Infrastructure Stack from the Target Type dropdown and finally, select the Monitoring Agent where you wish to deploy the plug-in. Click the Add Manually.... button and fill in the details for the new target using the appropriate hostname for your Enterprise Controller and the user and password details for the plug-in access user. After the target has been added to the agent you will need to allow a few minutes for the initial data collection to complete. Once completed you can see the new target in the All Targets list. All metric collections are enabled by default except one. To enable Infrastructure Stack Alarms collection, navigate to the newly added target and then to Target ? Monitoring ? Metric and Collection Settings. There you can click the “Disabled” link under Collection Schedule to enable collection and set your desired collection frequency. By default, a Warning level alert in Ops Center will equate to a Warning level event in Enterprise Manager and a Critical alert will equate to a Critical event. This mapping can be altered in the Metric and Collection Settings also. The default incident rules in Enterprise Manager only create incidents from Critical events so keep this in mind in case you want to see incidents generated for Warning or Info level alerts from Ops Center. Also, because Enterprise Manager already monitors the OS through it's Host target type, the plug-in does not pull OS alerts from Ops Center so as to prevent duplication. In addition to alert propagation, the plug-in also provides data for several reports detailing the topology and configuration of the stack as well as any hardware sensor data that is available. These are available from the Information Publisher Reports. Navigate there from the Enterprise ? Reports menu or directly from the Infrastructure Stack target of interest. As an example, here is a sample of the Hardware Sensors report showing some of the available sensor data. The report can also be exported to a CSV file format if desired. Connecting Ops Center to Enterprise Manager Repository For an Enterprise Manager user, the plug-in provides a deeper visibility to the state of the infrastructure underlying the databases and middleware. On the Ops Center side, there is also a greater visibility to the targets running on the infrastructure. To set up the Ops Center data collection, just navigate to the Administration section and select the Grid Control link. Select the Configure/Connect action from the right-hand menu and complete the wizard forms to enable the connection to the Enterprise Manager repository and UI. Be sure to use the sysman account when configuring the database connection. Once the job completes and the initial data synchronization is done you will see new Target tabs on your OS assets. The new tab lists all the Enterprise Manager targets and any alerts, availability and performance data specific to the selected target. It is also possible to use the GoTo icon to launch the Enterprise Manager BUI in context of the specific target or alert to drill into more detail. Hopefully this brief overview of the integration between Enterprise Manager and Ops Center has provided a jumpstart to getting a more complete view of the full stack of your enterprise systems.

    Read the article

  • September Independent Oracle User Group (IOUG) Regional Events:

    - by Mandy Ho
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} September 5, 2012 – Denver, CO Oracle 11g Database Upgrade Seminar Join Roy Swonger, Senior Director of software development at Oracle to learn about upgrading to Oracle Database 11g. Topics include: All the required preparatory steps Database upgrade strategies Post-upgrade performance analysis Helpful tips and common pitfalls to watch out for http://www.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=152242&src=7598177&src=7598177&Act=4 September 6, 2012 – Salt Lake City, UT Fall Symposium 2012 Plan to join us for our annual fall event on Sept 6. They day will be filled with learning and networking with tracks focused on Applications, APEX, BI, Development and DBA Topics. This event is free for UTOUG members to attend, but please register. http://www.utoug.org/apex/f?p=972:2:6686308836668467::::P2_EVENT_ID:121 September 6, 2012 – Portland, OR Oracle’s Hands on Workshop Series focused on providing Defense-in-Depth Solutions to secure data at the source, reduce risk and simplify compliance The Oracle Database Security Workshop is a one-day hands-on session for IT Managers, IT Security Architects and Oracle DBAs who are looking for solutions to address their information protection, privacy, and accountability challenges within their Oracle database environment. Most security programs offered today fail toadequately address database security. Customers continue to be challenged tosecure information against loss and protect the integrity of sensitiveinformation like critical financial data, personally identifiable information(PII) and credit card data for PCI compliance. http://nwoug.org/content.aspx?page_id=87&club_id=165905&item_id=241082 September 11, 2012 – Montreal, QC APEXposed! For APEX aficionados – join ODTUG in Montreal, September 11-12 for APEXposed! Topics will include Dynamic Actions, Plug-ins, Tuning, and Building Mobile Apps. The cost is $399 US and early registration ends August 15th. For more information: http://www.odtugapextraining.com  September 11, 2012 – Philadelphia, PA Big Data & What are we still doing wrong with Tom Kyte Tom Kyte is a Senior Technical Architect in Oracle's Server Technology Division. Tom is the Tom behind the AskTom column in Oracle Magazine and is also the author of Expert Oracle Database Architecture (Apress, 2005/2009) among other books Abstract: Big Data The term "big data" draws a lot of attention, but behind the hype there's a simple story. For decades, companies have been making business decisions based on transactional data stored in relational databases. However, beyond that critical data is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and photographs that can be mined for useful information. This presentation will take a look at what Big Data is and means - and Oracle's strategy for handling it Abstract: What are we still doing wrong? I've given many best practices presentations in the last 10 years. I've given many worst practices presentations in the last 10 years. I've seen some things change over the last ten years and many other things stay exactly the same. In this talk - we'll be taking a look at the good and the bad - what we do right and what we continue to do wrong over and over again. We'll look at why "Why" is probably the right initial answer to most any question. We'll look at how we get to "Know what we Know", and why that can be both a help and a hindrance. We'll peek at "Best Practices" and tie them into what I term "Worst Practices". In short, a talk on the good and the bad. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} http://ioug.itconvergence.com/pls/apex/f?p=207:27:3669516430980563::NO September 12, 2012- New York, NY NYOUG Fall General Meeting “Trends in Database Administration and Why the Future of Database Administration is the Vdba” http://www.nyoug.org/upcoming_events.htm#General_Meeting1 September 21, 2012 – Cleveland, OH Oracle Database 11g for Developers: What You need to know or Oracle Database 11g New Features for Developers Attendees are introduced to the new and improved features of Oracle 11g (both Oracle 11g R1 and Oracle 11g R2) that directly impact application development. Special emphasis is placed on features that reduce development time, make development simpler, improve performance, or speed deployment. Specific topics include: New SQL functions, virtual columns, result caching, XML improvements, pivot statements, JDBC improvements, and PL/SQL enhancements such as compound triggers. http://www.neooug.org/ September 24, 2012 – Ottawa, ON Introduction to Oracle Spatial The free Oracle Locator functionality, and the Oracle Spatial option which dramatically extends Locator, are very useful, but poorly understood capabilities of the database. In the afternoon we will extend into additional areas selected from: storage and performance; answering business problems with spatial queries; using Oracle Maps in OBIEE; an overview and capabilities of Oracle Topology; under the covers with GeoCoding. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} http://www.oug-ottawa.org/pls/htmldb/f?p=327:27:4209274028390246::NO

    Read the article

  • Emtel Knowledge Series - Q2/2014

    From Cyber Island to Smart Mauritius Cyber Island? Smart Mauritius? - What is Emtel talking about? "With the majority of the population living in urban environments today, the concept of "Smart Cities" has become an urgent necessity. "Smart Cities" refer to an urban transformation which, by using latest ICT technologies makes cities more efficient. Many Governments are setting out ambitious plans to build the cities of the future based on massive connectivity, high bandwidth communications, intelligent sensors and analysis of huge volumes of data. Various researches have shown four key enablers for smart city success - Government leadership, suitable technology infrastructure, solid public-private partnerships and engaged citizens. It is around these enabling factors that telecoms companies can play a vital role in assisting governments to deliver on the smart city vision." The Emtel Knowledge Series goes in compliance with Emtel's 25th anniversary celebrations throughout the year and the master of ceremony, Kim Andersen, mentioned that there will be more upcoming events on a quarterly base. As a representative of the Mauritius Software Craftsmanship Community (MSCC) there was absolutely no hesitation to join in again. Following my visit to the first Emtel Knowledge Series workshop back in February this year, it was great to have another opportunity to meet and exchange with technology experts. But quite frankly what is it with those buzz words... As far as I remember and how it was mentioned "Cyber Island" is an old initiative from around 2005/2006 which has been refreshed in 2010. It implies the empowerment of Information & Communication Technologies (ICT) as an essential factor of growth by the government here in Mauritius. Actually, the first promotional period of Cyber Island brought me here but that's another story. The venue and its own problems Like last time the event was organised and held at the Conference Hall at Cyber Tower I in Ebene. As I've been working there for some years, I know about the frustrating situation of finding a proper parking. So, does Smart Island include better solutions for the search of parking spaces? Maybe, let's see whether I will be able to answer that question at the end of the article. Anyway, after circling around the tower almost two times, I finally got a decent space to put the car, without risking to get a ticket or damage actually. International speakers and their experience Once again, Emtel did a great job to get international expertise onto the stage to share their experience and vision on this kind of embarkment. Personally, I really appreciated the fact they were speakers of global reach and could provide own-experience knowledge. Johan Gott spoke about the fundamental change that the Swedish government ignited in order to move their society and workers' environment away from heavy industry towards a knowledge-based approach. Additionally, we spoke about the effort and transformation of New York City into a greener and more efficient Smart City. Given modern technology he also advised that any kind of available Big Data should be opened to the general public - this openness would provide a playground for anyone to garner new ideas and most probably solid solutions of which no one else thought about before. Emtel Knowledge Series on moving from Cyber Island to Smart Mauritus Later during the afternoon that exact statement regarding openness to and transparency of government-owned Big Data has been emphasised again by the Danish speaker Kim Andersen and his former colleague Mika Jantunen from Finland. Mika continued to underline the important role of the government to provide a solid foundation for a knowledge-based society and mentioned that Finnish citizens have a constitutional right to broadband connectivity. Next to free higher (tertiary) education Finland already produced a good number of innovations, among them are: First country to grant voting rights to women Free higher education Constitutional right to broadband connectivity Nokia Linux Angry Birds Sauna and others...  General access to internet via broadband and/or mobile connectivity is surely a key factor towards Smart Cities, or better said Smart Mauritius given the area dimensions and size of population. CTO Paul Valette gave the audience a brief overview of the essential role that Emtel will have to move Mauritius forward towards a knowledge-based and innovation-driven environment for its citizen. What I have seen looks really promising and with recently published information that Mauritians have 127% of mobile capacity - meaning more than 1 mobile, smartphone or tablet per person - it will be crucial to have the right infrastructure for these connected devices. How would it be possible to achieve a knowledge-based society? YouTube to the rescue!Seriously, gaining more knowledge will require to have fast access to educational course material as explained by Dr Kaviraj Sukon, General Director of the Open University of Mauritius. According to him a good number of high-profile universities in the world have opened their course libraries to the general public, among them EDX, Coursera and Open University. Nowadays, you're actually able and enabled to learn for and earn a BSc or even MSc certification on your own pace - no need to attend classed on campus. It was really impressive to see the number of available hours - more than enough for a life-long learning experience! {loadposition content_adsense} Networking in the name of MSCC As briefly mentioned above I was about to combine two approaches for this workshop. Of course, getting latest information and updates on Emtel services available, especially for my business here on the west coast of the island, but also to meet and greet new people for the MSCC. And I think it was very positive on both sides. Let me quickly describe some of the key aspects that happened during the day: Met with Arnaud Meslier and Kellie, both Microsoft to swap latest information on IT events. Hereby, I got an invite to Microsoft Windows Phone 8.1 Dev Camp. Got in touch with Arvin Lockee, Emtel to check our options to meet with the data team, and seizing the opportunity to have a visiting tour at the Emtel Data Centre. Had a great chat with Avinash Meetoo, Knowledge 7, Kim Andersen and Mika Jantunen about the situation of teaching and learning in general and specifically in the private sector here in Mauritius. Additionally, a number of various other interesting chats... Once again, I'm catching up on a couple of business cards in order to provide more background information about the MSCC, and to create a better awareness of MSCC within the local IT businesses. There is more to come soon!  Resume of the day The number of attendees during this event has been doubled or even tripled this time. The whole organisation has been improved massively and the combination of presentation and summarizing panel discussions was better than during the previous workshop back in February. Overall, once again a well-organised workshop and I'm already looking forward to join the next workshop in Q3. Update End of July we finally managed to visit the Emtel Data Centre in Arsenal. It was an interesting opportunity for some of our MSCC members.

    Read the article

  • "power limit notification" clobbering on 12G Dell servers with RHEL6

    - by Andrew B
    Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

    Read the article

  • KVM Slow performance on XP Guest

    - by Gregg Leventhal
    The system is very slow to do anything, even browse a local folder, and CPU sits at 100% frequently. Guest is XP 32 bit. Host is Scientific Linux 6.2, Libvirt 0.10, Guest XP OS shows ACPI Multiprocessor HAL and a virtIO driver for NIC and SCSI. Installed. CPUInfo on host: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping : 7 cpu MHz : 3200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6784.93 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static' cpuset='0'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>SandyBridge</model> <vendor>Intel</vendor> <feature policy='require' name='vme'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='osxsave'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='ds'/> <feature policy='require' name='tsc-deadline'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='ht'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='force' name='sse'/> <feature policy='force' name='sse2'/> <feature policy='force' name='sse4.1'/> <feature policy='force' name='sse4.2'/> <feature policy='force' name='ssse3'/> <feature policy='force' name='x2apic'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/lib/libvirt/images/Server-10-9-13.qcow2'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </disk>

    Read the article

  • becomeFirstResponder not working!!!

    - by vikinara
    In the below code becomeFirstResonder not working, only resignFirstresponder working...can anyone please help - (BOOL)textFieldShouldReturn:(UITextField *)textField { if (textField == txtDate) { [txtDate resignFirstResponder]; [txtTime becomeFirstResponder]; } if (textField == txtTime) { [txtTime resignFirstResponder]; [txtAddress becomeFirstResponder]; } if (textField == txtAddress) { [txtAddress resignFirstResponder]; [txtCity becomeFirstResponder]; } if (textField == txtCity) { [txtCity resignFirstResponder]; [txtState becomeFirstResponder]; } if(textField == txtState) { [txtState resignFirstResponder]; [txtZip becomeFirstResponder]; } if (textField == txtZip) { [txtZip resignFirstResponder]; } return NO; } - (BOOL)textFieldShouldEndEditing:(UITextField *)textField { if(textField == txtDate) { NSString *dateString = txtDate.text; NSString *dateRegex = @"^(1[0-2]|0[1-9])/(3[01]|[12][0-9]|0[1-9])/[0-9]{4}$"; NSPredicate *dateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", dateRegex]; BOOL validateDate = [dateTest evaluateWithObject:dateString]; if(!validateDate){ UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Date Error." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtDate.text = nil; } } if(textField == txtTime) { NSString *timeString = txtTime.text; NSString *timeRegex = @"^(([0]?[0-5][0-9]|[0-9]):([0-5][0-9]))$"; NSPredicate *timeTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", timeRegex]; BOOL validateTime = [timeTest evaluateWithObject:timeString]; if(!validateTime) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Time Entry." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtTime.text = nil; } } if(textField == txtAddress) { NSString *addressString = txtAddress.text; NSString *addressRegex = @"^[a-z0-9 ]+$"; NSPredicate *addressTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", addressRegex]; BOOL validateAddress = [addressTest evaluateWithObject:addressString]; if(!validateAddress) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtAddress.text = nil; } } if(textField == txtState) { NSString *stateString = txtState.text; NSString *stateRegex = @"^(?-i:A[LKSZRAEP]|C[AOT]|D[EC]|F[LM]|G[AU]|HI|I[ADLN]|K[SY]|LA|M[ADEHINOPST]|N[CDEHJMVY]|O[HKR]|P[ARW]|RI|S[CD]|T[NX]|UT|V[AIT]|W[AIVY])$"; NSPredicate *stateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", stateRegex]; BOOL validateState = [stateTest evaluateWithObject:stateString]; if(!validateState) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtState.text = nil; } } if(textField == txtCity) { NSString *cityString = txtCity.text; NSString *cityRegex = @"^[a-z ]+$"; NSPredicate *cityTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", cityRegex]; BOOL validateCity = [cityTest evaluateWithObject:cityString]; if(!validateCity) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect City." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtCity.text = nil; } } if(textField == txtZip) { NSString *zipString = txtZip.text; NSString *zipRegex = @"^[0-9]{5}([- /]?[0-9]{4})?$"; NSPredicate *zipTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", zipRegex]; BOOL validateZip = [zipTest evaluateWithObject:zipString]; if(!validateZip) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Zip." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtZip.text = nil; } } return NO; }

    Read the article

  • ASP .NET 2.0 C# AjaxPro RegisterTypeForAjax

    - by Dan7el
    I am wondering if RegisterTypeForAjax isn't working correctly. I am getting the error noted at the end of the code block below. Sample is from here: http://www.ajaxtutorials.com/asp-net-ajax-quickstart/tutorial-introduction-to-ajax-in-asp-net-2-0-and-c/ Any ideas as to why I'm getting this error? Thanks. ASP .NET 2.0 C# Here is the code-behind: using System; using System.Data; using System.Data.SqlClient; using System.Configuration; using System.Collections; using System.Collections.Generic; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using AjaxPro; namespace WebApplication1 { public partial class Ajax_CSharp : System.Web.UI.Page { protected override void OnInit( EventArgs e ) { base.OnInit( e ); Load += new EventHandler( Page_Load ); } protected void Page_Load( object sender, EventArgs e ) { Utility.RegisterTypeForAjax( typeof( Ajax_CSharp ) ); } [ AjaxMethod( HttpSessionStateRequirement.ReadWrite ) ] public string GetData() { // method gets a row from the db and returns a string. } } Here is the ASPX page: <%@ Page Language="C#" AutoEventWireup="false" CodeBehind="Default.aspx.cs" Inherits="WebApplication1.Ajax_CSharp" % Untitled Page function GetData() { var response; Ajax_CSharp.GetData( GetData_CallBack ); } function GetData_CallBack( response ) { var response = response.value; if ( response == "Empty" ) { alert( "No Record Found." ); } else if ( response == "Error" ) { alert( "An Error Occurred in Accessing the Database !!!" ); } else { var arr = response.split( "~" ); var empID = arr[0].split( "," ); var empName = arr[1].split( "," ); document.getElementById( 'dlistEmployee' ).length = 0; for ( var i = 0; i < empID.Length; i++ ) { var o = document.createElement( "option" ); o.value = empID[i]; o.text = empName[i]; document.getElementById( 'dlistEmployee' ).add( o ); } } } function dodisplay() { var selIndex = document.getElementById( "dlistEmployee" ).selectedIndex; var empName = document.getElementById( "dlistEmployee" ).options( selIndex ).text; var empID = document.getElementById( "dlistEmployee" ).options( selIndex ).value; document.getElementById( "lblResult" ).innerHTML = "You have selected " + empName + " (ID: " + empID + " )"; } </script>    Run it and click on the button and I get this error: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2; MS-RTC LM 8) Timestamp: Mon, 26 Apr 2010 17:22:44 UTC Message: 'Ajax_CSharp' is undefined Line: 13 Char: 11 Code: 0 URI: http://localhost:4678/Default.aspx

    Read the article

  • WCF .svc Accessible Over HTTP But Accessing WSDL Causes "Connection Was Reset"

    - by Wolfwyrd
    I have a WCF service which is hosted on IIS6 on a Win2003 SP2 machine. The WCF service is hosting correctly and is visible over HTTP giving the usual "To test this service, you will need to create a client and use it to call the service" message. However accessing the .svc?WSDL link causes the connection to be reset. The server itself is returning a 200 in the logs for the WSDL request, an example of which is shown here, the first call gets a connection reset, the second is a successful call for the .svc file. 2010-04-09 11:00:21 W3SVC6 MACHINENAME 10.79.42.115 GET /IntegrationService.svc wsdl 80 - 10.75.33.71 HTTP/1.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+1.1.4322;+.NET+CLR+1.0.3705;+InfoPath.1;+.NET+CLR+3.0.04506.30;+MS-RTC+LM+8;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;) - - devsitename.mydevdomain.com 200 0 0 0 696 3827 2010-04-09 11:04:10 W3SVC6 MACHINENAME 10.79.42.115 GET /IntegrationService.svc - 80 - 10.75.33.71 HTTP/1.1 Mozilla/5.0+(Windows;+U;+Windows+NT+5.1;+en-GB;+rv:1.9.1.9)+Gecko/20100315+Firefox/3.5.9+(.NET+CLR+3.5.30729) - - devsitename.mydevdomain.com 200 0 0 3144 457 265 My Web.Config looks like: <system.serviceModel> <serviceHostingEnvironment > <baseAddressPrefixFilters> <add prefix="http://devsitename.mydevdomain.com" /> </baseAddressPrefixFilters> </serviceHostingEnvironment> <behaviors> <serviceBehaviors> <behavior name="My.Service.IntegrationServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="My.Service.IntegrationServiceBehavior" name="My.Service.IntegrationService"> <endpoint address="" binding="wsHttpBinding" contract="My.Service.Interfaces.IIntegrationService" bindingConfiguration="NoSecurityConfig" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> <bindings> <wsHttpBinding> <binding name="NoSecurityConfig"> <security mode="None" /> </binding> </wsHttpBinding> </bindings> </system.serviceModel> I'm pretty much stumped by this one. It works fine through the local dev server in VS2008 but fails after deployment. For further information, the targeted machine does not have a firewall (it's on the internal network) and the logs show the site thinks it's fine with 200 OK responses. I've also tried updating the endpoint with the full URL to my service however it still makes no difference. I have looked into some of the other options - creating a separate WSDL manually and exposing it through the metadata properties (really don't want to do that due to the maintenance issues). If anyone can offer any thoughts on this or any other workarounds it would be greatly appreciated.

    Read the article

  • numpy calling sse2 via ctypes

    - by Daniel
    Hello, In brief, I am trying to call into a shared library from python, more specifically, from numpy. The shared library is implemented in C using sse2 instructions. Enabling optimisation, i.e. building the library with -O2 or –O1, I am facing strange segfaults when calling into the shared library via ctypes. Disabling optimisation (-O0), everything works out as expected, as is the case when linking the library to a c-program directly (optimised or not). Attached you find a snipped which exhibits the delineated behaviour on my system. With optimisation enabled, gdb reports a segfault in __builtin_ia32_loadupd (__P) at emmintrin.h:113. The value of __P is reported as optimised out. test.c: #include <emmintrin.h> #include <complex.h> void test(const int m, const double* x, double complex* y) { int i; __m128d _f, _x, _b; double complex f __attribute__( (aligned(16)) ); double complex b __attribute__( (aligned(16)) ); __m128d* _p; b = 1; _b = _mm_loadu_pd( (double *) &b ); _p = (__m128d*) y; for(i=0; i<m; ++i) { f = cexp(-I*x[i]); _f = _mm_loadu_pd( (double *) &f ); _x = _mm_loadu_pd( (double *) &x[i] ); _f = _mm_shuffle_pd(_f, _f, 1); *_p = _mm_add_pd(*_p, _f); *_p = _mm_add_pd(*_p, _x); *_p = _mm_mul_pd(*_p,_b); _p++; } return; } Compiler flags: gcc -o libtest.so -shared -std=c99 -msse2 -fPIC -O2 -g -lm test.c test.py: import numpy as np import os def zerovec_aligned(nr, dtype=np.float64, boundary=16): '''Create an aligned array of zeros. ''' size = nr * np.dtype(dtype).itemsize tmp = np.zeros(size + boundary, dtype=np.uint8) address = tmp.__array_interface__['data'][0] offset = boundary - address % boundary return tmp[offset:offset + size].view(dtype=dtype) lib = np.ctypeslib.load_library('libtest', '.' ) lib.test.restype = None lib.test.argtypes = [np.ctypeslib.ctypes.c_int, np.ctypeslib.ndpointer(np.float64, flags=('C', 'A') ), np.ctypeslib.ndpointer(np.complex128, flags=('C', 'A', 'W') )] n = 13 y = zerovec_aligned(n, dtype=np.complex128) x = np.ones(n, dtype=np.float64) # x = zerovec_aligned(n, dtype=np.float64) # x[:] = 1. lib.test(n,x,y) My system: Ubuntu Linux i686 2.6.31-22-generic Compiler: gcc (Ubuntu 4.4.1-4ubuntu9) Python: Python 2.6.4 (r264:75706, Dec 7 2009, 18:45:15) [GCC 4.4.1] Numpy: 1.4.0 I have taken provisions (cf. python code) that y is aligned and the alignment of x should not matter (I think; explicitly aligning x does not solve the problem though). Note also that i use _mm_loadu_pd instead of _mm_load_pd when loading b and f. For the C-only version _mm_load_pd works (as expected). However, when calling the function via ctypes using _mm_load_pd always segfaults (independent of optimisation). I have tried several days to sort out this issue without success ... and I am on the verge beating my monitor to death. Any input welcome. Daniel

    Read the article

  • ERROR: Failed to build gem native extension (mysql2 on rails 3.2.3)

    - by Ryan Arneson
    I'm trying to install the mysql2 gem with Rails 3.2.3 and it's failing: ? bundle install Fetching gem metadata from https://rubygems.org/......... Using rake (0.9.2.2) Using i18n (0.6.0) Using multi_json (1.2.0) Using activesupport (3.2.3) Using builder (3.0.0) Using activemodel (3.2.3) Using erubis (2.7.0) Using journey (1.0.3) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.1) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.2) Using actionpack (3.2.3) Using mime-types (1.18) Using polyglot (0.3.3) Using treetop (1.4.10) Using mail (2.4.4) Using actionmailer (3.2.3) Using arel (3.0.2) Using tzinfo (0.3.32) Using activerecord (3.2.3) Using activeresource (3.2.3) Using bundler (1.1.3) Using coffee-script-source (1.2.0) Using execjs (1.3.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.6.6) Using rdoc (3.12) Using thor (0.14.6) Using railties (3.2.3) Using coffee-rails (3.2.2) Using jquery-rails (2.0.2) Installing mysql2 (0.3.11) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby extconf.rb checking for rb_thread_blocking_region()... yes checking for rb_wait_for_single_fd()... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby --with-mysql-config --without-mysql-config --with-mysql-dir --without-mysql-dir --with-mysql-include --without-mysql-include=${mysql-dir}/include --with-mysql-lib --without-mysql-lib=${mysql-dir}/lib --with-mysqlclientlib --without-mysqlclientlib --with-mlib --without-mlib --with-mysqlclientlib --without-mysqlclientlib --with-zlib --without-zlib --with-mysqlclientlib --without-mysqlclientlib --with-socketlib --without-socketlib --with-mysqlclientlib --without-mysqlclientlib --with-nsllib --without-nsllib --with-mysqlclientlib --without-mysqlclientlib --with-mygcclib --without-mygcclib --with-mysqlclientlib --without-mysqlclientlib Gem files will remain installed in /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11 for inspection. Results logged to /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11/ext/mysql2/gem_make.out An error occured while installing mysql2 (0.3.11), and Bundler cannot continue. Make sure that `gem install mysql2 -v '0.3.11'` succeeds before bundling. I'm running bundle install and this is in my Gemfile: gem 'mysql2', '~> 0.3.11' I've currently got MySQL running through MAMP. I'm not sure if this is a bad idea and I should run a vanilla MySQl but it seems my current problem is just getting the gem installed. I've seen quite a few of these problems here on stackoverflow but all seem a bit different or have really complicated solutions. Is there something I'm missing? Something simple? Something stupid? I can provide additional info from the out file if necessary. I've read that some people use SQLite for dev and test then MySQL in prod but that sounds like a pretty horrible idea.

    Read the article

  • Arduino Ethernet Shield Not Connecting to WebServer

    - by new user
    I have a problem making my Arduino Ethernet shield to communicate with the server, the result on the serial monitor is always: my arduino code is #include <Ethernet.h> //library for ethernet functions #include <SPI.h> #include <Dns.h> #include <Client.h> //library for client functions #include <DallasTemperature.h> //library for temperature sensors // Ethernet settings byte mac[] = {0x09,0xA2,0xDA,0x00,0x01,0x26}; //Replace with your Ethernet shield MAC byte ip[] = { 192,168,0,54}; //The Arduino device IP address byte subnet[] = { 255,255,255,0}; byte gateway[] = { 192,168,0,1}; IPAddress server(192,168,0,53); // IP-adress of server arduino sends data to EthernetClient client; bool connected = false; void setup(void) { Serial.begin(9600); Serial.println("Initializing Ethernet."); delay(1000); Ethernet.begin(mac, ip , gateway , subnet); } void loop(void) { if(!connected) { Serial.println("Not connected"); if (client.connect(server, 80)) { connected = true; int temp =analogRead(A1); Serial.print("Temp is "); Serial.println(temp); Serial.println(); Serial.println("Sending to Server: "); client.print("GET /formSubmit.php?t0="); Serial.print("GET /formSubmit.php?t0="); client.print(temp); Serial.print(temp); client.println(" HTTP/1.1"); Serial.println(" HTTP/1.1"); client.println("Host: http://localhost/PhpProject1/"); Serial.println("Host: http://localhost/PhpProject1/"); client.println("User-Agent: Arduino"); Serial.println("User-Agent: Arduino"); client.println("Accept: text/html"); Serial.println("Accept: text/html"); //client.println("Connection: close"); //Serial.println("Connection: close"); client.println(); Serial.println(); delay(10000); } else{ Serial.println("Cannot connect to Server"); } } else { delay(1000); while (client.connected() && client.available()) { char c = client.read(); Serial.print(c); } Serial.println(); client.stop(); connected = false; } } the server is an Apache server running on a pc, the server ip address in the code is the pc ip address. For testing purposes I work at my homes network, there's no proxy or firewall, and I also turned of the antivirus and firewall on my pc. the result in the serial monitor is always: Not connected Cannot connect to Server Any thoughts??

    Read the article

  • Form gets submitted Multiple times

    - by rasika vijay
    While clicking inside the form , the form automatically tried to resubmit , I cannot figure out which part of the code causes it to behave like this . In the createTable function , a table is created after the domain is given . But I am unable to select any of the controls in the output . I have attached the jsfiddle code link here : http://jsfiddle.net/rasikaceg/S7kWM/ function createTable() { document.getElementById("table_container").innerHTML = ""; var input_domain = document.forms["form1"]["DomainName"].value; if (input_domain == null || input_domain == "") return; var table = document.createElement("table"), tablehead = document.createElement("thead"), theadrow = document.createElement("tr"), th1 = document.createElement("th"), th2 = document.createElement("th"), th3 = document.createElement("th"), th4 = document.createElement("th"); th1.appendChild(document.createTextNode("Website")); th2.appendChild(document.createTextNode("Enable/Disable Live Update for LM and CBD")); th3.appendChild(document.createTextNode("From Date")); th4.appendChild(document.createTextNode("To Date")); theadrow.appendChild(th1); theadrow.appendChild(th2); theadrow.appendChild(th3); theadrow.appendChild(th4); tablehead.appendChild(theadrow); table.appendChild(tablehead); var names = ["website1", "website2"]; var container = document.getElementById("table_container"); var tablebody = document.createElement("tbody"); for (var i = 0, len = names.length; i < len; ++i) { var row = document.createElement("tr"), column1 = document.createElement("td"), column2 = document.createElement("td"), column3 = document.createElement("td"), column4 = document.createElement("td"), checkbox = document.createElement('input'); checkbox.type = "checkbox"; checkbox.name = names[i]; checkbox.value = names[i]; checkbox.id = names[i]; var label = document.createElement('label') label.htmlFor = names[i]; label.appendChild(document.createTextNode(names[i])); column1.appendChild(checkbox); column1.appendChild(label); var dropdown = document.createElement("select"); dropdown.name = names[i] + "_select"; var op1 = new Option(); op1.value = "enable"; op1.text = "enable"; var op2 = new Option(); op2.value = "disable"; op2.text = "disable"; dropdown.options.add(op1); dropdown.options.add(op2); column2.appendChild(dropdown); var datetime_from = document.createElement('input'); datetime_from.type = "datetime-local"; datetime_from.name = names[i] + "_from"; column3.appendChild(datetime_from); var datetime_to = document.createElement('input'); datetime_to.type = "datetime-local"; datetime_to.name = names[i] + "_to"; column4.appendChild(datetime_to); row.appendChild(column1); row.appendChild(column2); row.appendChild(column3); row.appendChild(column4); tablebody.appendChild(row); } table.appendChild(tablebody); document.getElementById("table_container").appendChild(table); }

    Read the article

< Previous Page | 17 18 19 20 21 22 23  | Next Page >