Search Results

Search found 53321 results on 2133 pages for 'vc net'.

Page 21/2133 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Template inheritence c++

    - by Chris Condy
    I have made a template singleton class, I have also made a data structure that is templated. My question is; how do I make my templated data structure inherit from a singleton so you can only have one float type of this structure? I have tested both seperate and have found no problems. Code provided under... (That is the problem) template <class Type> class AbstractRManagers : public Singleton<AbstractRManagers<Type> > The problem is the code above doesn't work I get alot of errors. I cant get it to no matter what I do template a templated singleton class... I was asking for maybe advice or maybe if the code above is incorrect guidence? #ifndef SINGLETON_H #define SINGLETON_H template <class Type> class Singleton { public: virtual ~Singleton(); Singleton(); static Type* m_instance; }; template <class Type> Type* Singleton<Type>::m_instance = 0; #include "Singleton.cpp" #endif #ifndef SINGLETON_CPP #define SINGLETON_CPP #include "Singleton.h" template <class Type> Singleton<Type>::Singleton() { } template <class Type> Singleton<Type>::~Singleton() { } template <class Type> Type* Singleton<Type>::getInstance() { if(m_instance==nullptr) { m_instance = new Type; } return m_instance; } #endif #ifndef ABSTRACTRMANAGERS_H #define ABSTRACTRMANAGERS_H #include <vector> #include <map> #include <stack> #include "Singleton.h" template <class Type> class AbstractRManagers : public Singleton<AbstractRManagers<Type> > { public: virtual ~AbstractRManagers(); int insert(Type* type, std::string name); Type* remove(int i); Type* remove(std::string name); Type* get(int i); Type* getS(std::string name); int get(std::string name); int get(Type* i); bool check(std::string name); int resourceSize(); protected: private: std::vector<Type*> m_resources; std::map<std::string,int> m_map; std::stack<int> m_freePos; }; #include "AbstractRManagers.cpp" #endif #ifndef ABSTRACTRMANAGERS_CPP #define ABSTRACTRMANAGERS_CPP #include "AbstractRManagers.h" template <class Type> int AbstractRManagers<Type>::insert(Type* type, std::string name) { int i=0; if(!check(name)) { if(m_freePos.empty()) { m_resources.push_back(type); i = m_resources.size()-1; m_map[name] = i; } else { i = m_freePos.top(); m_freePos.pop(); m_resources[i] = type; m_map[name] = i; } } else i = -1; return i; } template <class Type> int AbstractRManagers<Type>::resourceSize() { return m_resources.size(); } template <class Type> bool AbstractRManagers<Type>::check(std::string name) { std::map<std::string,int>::iterator it; it = m_map.find(name); if(it==m_map.end()) return false; return true; } template <class Type> Type* AbstractRManagers<Type>::remove(std::string name) { Type* temp = m_resources[m_map[name]]; if(temp!=NULL) { std::map<std::string,int>::iterator it; it = m_map[name]; m_resources[m_map[name]] = NULL; m_freePos.push(m_map[name]); delete (*it).second; delete (*it).first; return temp; } return NULL; } template <class Type> Type* AbstractRManagers<Type>::remove(int i) { if((i < m_resources.size())&&(i > 0)) { Type* temp = m_resources[i]; m_resources[i] = NULL; m_freePos.push(i); std::map<std::string,int>::iterator it; for(it=m_map.begin();it!=m_map.end();it++) { if((*it).second == i) { delete (*it).second; delete (*it).first; return temp; } } return temp; } return NULL; } template <class Type> int AbstractRManagers<Type>::get(Type* i) { for(int i2=0;i2<m_resources.size();i2++) { if(i == m_resources[i2]) { return i2; } } return -1; } template <class Type> Type* AbstractRManagers<Type>::get(int i) { if((i < m_resources.size())&&(i >= 0)) { return m_resources[i]; } return NULL; } template <class Type> Type* AbstractRManagers<Type>::getS(std::string name) { return m_resources[m_map[name]]; } template <class Type> int AbstractRManagers<Type>::get(std::string name) { return m_map[name]; } template <class Type> AbstractRManagers<Type>::~AbstractRManagers() { } #endif #include "AbstractRManagers.h" struct b { float x; }; int main() { b* a = new b(); AbstractRManagers<b>::getInstance()->insert(a,"a"); return 0; } This program produces next errors when compiled : 1> main.cpp 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1> c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(124) : while compiling class template member function 'bool std::less<_Ty>::operator ()(const _Ty &,const _Ty &) const' 1> with 1> [ 1> _Ty=std::string 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\map(71) : see reference to class template instantiation 'std::less<_Ty>' being compiled 1> with 1> [ 1> _Ty=std::string 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(451) : see reference to class template instantiation 'std::_Tmap_traits<_Kty,_Ty,_Pr,_Alloc,_Mfl>' being compiled 1> with 1> [ 1> _Kty=std::string, 1> _Ty=int, 1> _Pr=std::less<std::string>, 1> _Alloc=std::allocator<std::pair<const std::string,int>>, 1> _Mfl=false 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(520) : see reference to class template instantiation 'std::_Tree_nod<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(659) : see reference to class template instantiation 'std::_Tree_val<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\program files\microsoft visual studio 10.0\vc\include\map(81) : see reference to class template instantiation 'std::_Tree<_Traits>' being compiled 1> with 1> [ 1> _Traits=std::_Tmap_traits<std::string,int,std::less<std::string>,std::allocator<std::pair<const std::string,int>>,false> 1> ] 1> c:\users\chris\desktop\311\ideas\idea1\idea1\abstractrmanagers.h(28) : see reference to class template instantiation 'std::map<_Kty,_Ty>' being compiled 1> with 1> [ 1> _Kty=std::string, 1> _Ty=int 1> ] 1> c:\users\chris\desktop\311\ideas\idea1\idea1\abstractrmanagers.h(30) : see reference to class template instantiation 'AbstractRManagers<Type>' being compiled 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::stack<_Ty,_Container> &,const std::stack<_Ty,_Container> &)' : could not deduce template argument for 'const std::stack<_Ty,_Container> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\stack(166) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::deque<_Ty,_Alloc> &,const std::deque<_Ty,_Alloc> &)' : could not deduce template argument for 'const std::deque<_Ty,_Alloc> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\deque(1725) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Tree<_Traits> &,const std::_Tree<_Traits> &)' : could not deduce template argument for 'const std::_Tree<_Traits> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xtree(1885) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::vector<_Ty,_Ax> &,const std::vector<_Ty,_Ax> &)' : could not deduce template argument for 'const std::vector<_Ty,_Ax> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\vector(1502) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::unique_ptr<_Ty,_Dx> &,const std::unique_ptr<_Ty2,_Dx2> &)' : could not deduce template argument for 'const std::unique_ptr<_Ty,_Dx> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\memory(2582) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::reverse_iterator<_RanIt> &,const std::reverse_iterator<_RanIt2> &)' : could not deduce template argument for 'const std::reverse_iterator<_RanIt> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1356) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::_Revranit<_RanIt,_Base> &,const std::_Revranit<_RanIt2,_Base2> &)' : could not deduce template argument for 'const std::_Revranit<_RanIt,_Base> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\xutility(1179) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2784: 'bool std::operator <(const std::pair<_Ty1,_Ty2> &,const std::pair<_Ty1,_Ty2> &)' : could not deduce template argument for 'const std::pair<_Ty1,_Ty2> &' from 'const std::string' 1> c:\program files\microsoft visual studio 10.0\vc\include\utility(318) : see declaration of 'std::operator <' 1>c:\program files\microsoft visual studio 10.0\vc\include\xfunctional(125): error C2676: binary '<' : 'const std::string' does not define this operator or a conversion to a type acceptable to the predefined operator ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

    Read the article

  • Parallelism in .NET – Part 1, Decomposition

    - by Reed
    The first step in designing any parallelized system is Decomposition.  Decomposition is nothing more than taking a problem space and breaking it into discrete parts.  When we want to work in parallel, we need to have at least two separate things that we are trying to run.  We do this by taking our problem and decomposing it into parts. There are two common abstractions that are useful when discussing parallel decomposition: Data Decomposition and Task Decomposition.  These two abstractions allow us to think about our problem in a way that helps leads us to correct decision making in terms of the algorithms we’ll use to parallelize our routine. To start, I will make a couple of minor points. I’d like to stress that Decomposition has nothing to do with specific algorithms or techniques.  It’s about how you approach and think about the problem, not how you solve the problem using a specific tool, technique, or library.  Decomposing the problem is about constructing the appropriate mental model: once this is done, you can choose the appropriate design and tools, which is a subject for future posts. Decomposition, being unrelated to tools or specific techniques, is not specific to .NET in any way.  This should be the first step to parallelizing a problem, and is valid using any framework, language, or toolset.  However, this gives us a starting point – without a proper understanding of decomposition, it is difficult to understand the proper usage of specific classes and tools within the .NET framework. Data Decomposition is often the simpler abstraction to use when trying to parallelize a routine.  In order to decompose our problem domain by data, we take our entire set of data and break it into smaller, discrete portions, or chunks.  We then work on each chunk in the data set in parallel. This is particularly useful if we can process each element of data independently of the rest of the data.  In a situation like this, there are some wonderfully simple techniques we can use to take advantage of our data.  By decomposing our domain by data, we can very simply parallelize our routines.  In general, we, as developers, should be always searching for data that can be decomposed. Finding data to decompose if fairly simple, in many instances.  Data decomposition is typically used with collections of data.  Any time you have a collection of items, and you’re going to perform work on or with each of the items, you potentially have a situation where parallelism can be exploited.  This is fairly easy to do in practice: look for iteration statements in your code, such as for and foreach. Granted, every for loop is not a candidate to be parallelized.  If the collection is being modified as it’s iterated, or the processing of elements depends on other elements, the iteration block may need to be processed in serial.  However, if this is not the case, data decomposition may be possible. Let’s look at one example of how we might use data decomposition.  Suppose we were working with an image, and we were applying a simple contrast stretching filter.  When we go to apply the filter, once we know the minimum and maximum values, we can apply this to each pixel independently of the other pixels.  This means that we can easily decompose this problem based off data – we will do the same operation, in parallel, on individual chunks of data (each pixel). Task Decomposition, on the other hand, is focused on the individual tasks that need to be performed instead of focusing on the data.  In order to decompose our problem domain by tasks, we need to think about our algorithm in terms of discrete operations, or tasks, which can then later be parallelized. Task decomposition, in practice, can be a bit more tricky than data decomposition.  Here, we need to look at what our algorithm actually does, and how it performs its actions.  Once we have all of the basic steps taken into account, we can try to analyze them and determine whether there are any constraints in terms of shared data or ordering.  There are no simple things to look for in terms of finding tasks we can decompose for parallelism; every algorithm is unique in terms of its tasks, so every algorithm will have unique opportunities for task decomposition. For example, say we want our software to perform some customized actions on startup, prior to showing our main screen.  Perhaps we want to check for proper licensing, notify the user if the license is not valid, and also check for updates to the program.  Once we verify the license, and that there are no updates, we’ll start normally.  In this case, we can decompose this problem into tasks – we have a few tasks, but there are at least two discrete, independent tasks (check licensing, check for updates) which we can perform in parallel.  Once those are completed, we will continue on with our other tasks. One final note – Data Decomposition and Task Decomposition are not mutually exclusive.  Often, you’ll mix the two approaches while trying to parallelize a single routine.  It’s possible to decompose your problem based off data, then further decompose the processing of each element of data based on tasks.  This just provides a framework for thinking about our algorithms, and for discussing the problem.

    Read the article

  • Optional Parameters and Named Arguments in C# 4 (and a cool scenario w/ ASP.NET MVC 2)

    - by ScottGu
    [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] This is the seventeenth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s post covers two new language feature being added to C# 4.0 – optional parameters and named arguments – as well as a cool way you can take advantage of optional parameters (both in VB and C#) with ASP.NET MVC 2. Optional Parameters in C# 4.0 C# 4.0 now supports using optional parameters with methods, constructors, and indexers (note: VB has supported optional parameters for awhile). Parameters are optional when a default value is specified as part of a declaration.  For example, the method below takes two parameters – a “category” string parameter, and a “pageIndex” integer parameter.  The “pageIndex” parameter has a default value of 0, and as such is an optional parameter: When calling the above method we can explicitly pass two parameters to it: Or we can omit passing the second optional parameter – in which case the default value of 0 will be passed:   Note that VS 2010’s Intellisense indicates when a parameter is optional, as well as what its default value is when statement completion is displayed: Named Arguments and Optional Parameters in C# 4.0 C# 4.0 also now supports the concept of “named arguments”.  This allows you to explicitly name an argument you are passing to a method – instead of just identifying it by argument position.  For example, I could write the code below to explicitly identify the second argument passed to the GetProductsByCategory method by name (making its usage a little more explicit): Named arguments come in very useful when a method supports multiple optional parameters, and you want to specify which arguments you are passing.  For example, below we have a method DoSomething that takes two optional parameters: We could use named arguments to call the above method in any of the below ways: Because both parameters are optional, in cases where only one (or zero) parameters is specified then the default value for any non-specified arguments is passed. ASP.NET MVC 2 and Optional Parameters One nice usage scenario where we can now take advantage of the optional parameter support of VB and C# is with ASP.NET MVC 2’s input binding support to Action methods on Controller classes. For example, consider a scenario where we want to map URLs like “Products/Browse/Beverages” or “Products/Browse/Deserts” to a controller action method.  We could do this by writing a URL routing rule that maps the URLs to a method like so: We could then optionally use a “page” querystring value to indicate whether or not the results displayed by the Browse method should be paged – and if so which page of the results should be displayed.  For example: /Products/Browse/Beverages?page=2. With ASP.NET MVC 1 you would typically handle this scenario by adding a “page” parameter to the action method and make it a nullable int (which means it will be null if the “page” querystring value is not present).  You could then write code like below to convert the nullable int to an int – and assign it a default value if it was not present in the querystring: With ASP.NET MVC 2 you can now take advantage of the optional parameter support in VB and C# to express this behavior more concisely and clearly.  Simply declare the action method parameter as an optional parameter with a default value: C# VB If the “page” value is present in the querystring (e.g. /Products/Browse/Beverages?page=22) then it will be passed to the action method as an integer.  If the “page” value is not in the querystring (e.g. /Products/Browse/Beverages) then the default value of 0 will be passed to the action method.  This makes the code a little more concise and readable. Summary There are a bunch of great new language features coming to both C# and VB with VS 2010.  The above two features (optional parameters and named parameters) are but two of them.  I’ll blog about more in the weeks and months ahead. If you are looking for a good book that summarizes all the language features in C# (including C# 4.0), as well provides a nice summary of the core .NET class libraries, you might also want to check out the newly released C# 4.0 in a Nutshell book from O’Reilly: It does a very nice job of packing a lot of content in an easy to search and find samples format. Hope this helps, Scott

    Read the article

  • IE9 RC fixed the “Internet Explorer cannot display the webpage” error when running an ASP.NET application in Visual Studio

    - by Jon Galloway
    One of the obstacles ASP.NET developers faced in using the Internet Explorer 9 Beta was the dreaded “Internet Explorer cannot display the webpage” error when running an ASP.NET application in Visual Studio. In the bug information on Connect (issue 601047), Eric Lawrence said that the problem was due to “caused by failure to failover from IPv6 to IPv4 when the connection is local.” Robert MacLean gives some more information as what was going wrong: “The problem is Windows, especially since it assumes IPv6 is better than IPv4. Note […] that when you ping localhost you get an IPv6 address. So what appears to be happening is when IE9 tries to go to localhost it uses IPv6, and the ASP.NET Development Server is IPv4 only and so nothing loads and we get the error.” The Simple Fix - Install IE 9 RC Internet Explorer 9 RC fixes this bug, so if you had tried IE 9 Beta and stopped using it due to problems with ASP.NET development, install the RC. The Workaround in IE 9 Beta If you're stuck on IE 9 Beta for some reason, you can follow Robert's workaround, which involves a one character edit to your hosts file. I've been using it for months, and it works great. Open notepad (running as administrator) and edit the hosts file (found in %systemroot%\system32\drivers\etc) Remove the # comment character before the line starting with 127.0.0.1 Save the file - if you have problems saving, it's probably because you weren't running as administrator When you're done, your hosts file will end with the following lines (assuming you were using a default hosts file setup beforehand): # localhost name resolution is handled within DNS itself.     127.0.0.1       localhost #    ::1             localhost Note: more information on editing your hosts file here. This causes Windows to default to IPv4 when resolving localhost, which will point to 127.0.0.1, which is right where Cassini - I mean the ASP.NET Web Development Server - is waiting for it.

    Read the article

  • Deploying ASP.NET Web Applications

    - by Ben Griswold
    In this episode, Noah and I explain how to use Web Deployment Projects to deploy your web application. This screencast will get you up and running, but in a future screencast, we discuss more advanced topics like excluding files, swapping out the right config files per environment, and alternate solution configurations.  This screencast (and the next) are based on a write-up I did about ASP.NET Web Application deployment with Web Deployment Projects a while back.  Multi-media knowledge sharing.  You have to love it! This is the first video hosted on Vimeo.  What do you think?

    Read the article

  • .NET: Interface Problem VB.net Getter Only Interface

    - by snmcdonald
    Why does an interface override a class definition and violate class encapsulation? I have included two samples below, one in C# and one in VB.net? VB.net Module Module1 Sub Main() Dim testInterface As ITest = New TestMe Console.WriteLine(testInterface.Testable) ''// Prints False testInterface.Testable = True ''// Access to Private!!! Console.WriteLine(testInterface.Testable) ''// Prints True Dim testClass As TestMe = New TestMe Console.WriteLine(testClass.Testable) ''// Prints False ''//testClass.Testable = True ''// Compile Error Console.WriteLine(testClass.Testable) ''// Prints False End Sub End Module Public Class TestMe : Implements ITest Private m_testable As Boolean = False Public Property Testable As Boolean Implements ITest.Testable Get Return m_testable End Get Private Set(ByVal value As Boolean) m_testable = value End Set End Property End Class Interface ITest Property Testable As Boolean End Interface C# using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace InterfaceCSTest { class Program { static void Main(string[] args) { ITest testInterface = new TestMe(); Console.WriteLine(testInterface.Testable); testInterface.Testable = true; Console.WriteLine(testInterface.Testable); TestMe testClass = new TestMe(); Console.WriteLine(testClass.Testable); //testClass.Testable = true; Console.WriteLine(testClass.Testable); } } class TestMe : ITest { private bool m_testable = false; public bool Testable { get { return m_testable; } private set { m_testable = value; } } } interface ITest { bool Testable { get; set; } } } More Specifically How do I implement a interface in VB.net that will allow for a private setter. For example in C# I can declare: class TestMe : ITest { private bool m_testable = false; public bool Testable { get { return m_testable; } private set //No Compile Error here! { m_testable = value; } } } interface ITest { bool Testable { get; } } However, if I declare an interface property as readonly in VB.net I cannot create a setter. If I create a VB.net interface as just a plain old property then interface declarations will violate my encapsulation. Public Class TestMe : Implements ITest Private m_testable As Boolean = False Public ReadOnly Property Testable As Boolean Implements ITest.Testable Get Return m_testable End Get Private Set(ByVal value As Boolean) ''//Compile Error m_testable = value End Set End Property End Class Interface ITest ReadOnly Property Testable As Boolean End Interface So my question is, how do I define a getter only Interface in VB.net with proper encapsulation? I figured the first example would have been the best method. However, it appears as if interface definitions overrule class definitions. So I tried to create a getter only (Readonly) property like in C# but it does not work for VB.net. Maybe this is just a limitation of the language?

    Read the article

  • Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

    - by Reed
    Many routines are parallelized because they are long running processes.  When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled.  I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective.  Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken.  A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource.  There are many goals which led to this design.  For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative.  A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent.  A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query.  Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised.  Be aware, however, that cancellation will not be instantaneous.  When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing.  cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed.  This goes back to the first goal I mentioned – Cancellation is cooperative.  Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns.  This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well.  There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently.  PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack.  This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well.  Here, we supply our CancellationToken as part of the configuration.  The ParallelOptions class contains a property for the CancellationToken.  This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query.  As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ.  The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine.  The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario.  This works because we’re using the same CancellationToken provided in the ParallelOptions.  If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

    Read the article

  • Parallelism in .NET – Part 15, Making Tasks Run: The TaskScheduler

    - by Reed
    In my introduction to the Task class, I specifically made mention that the Task class does not directly provide it’s own execution.  In addition, I made a strong point that the Task class itself is not directly related to threads or multithreading.  Rather, the Task class is used to implement our decomposition of tasks.  Once we’ve implemented our tasks, we need to execute them.  In the Task Parallel Library, the execution of Tasks is handled via an instance of the TaskScheduler class. The TaskScheduler class is an abstract class which provides a single function: it schedules the tasks and executes them within an appropriate context.  This class is the class which actually runs individual Task instances.  The .NET Framework provides two (internal) implementations of the TaskScheduler class. Since a Task, based on our decomposition, should be a self-contained piece of code, parallel execution makes sense when executing tasks.  The default implementation of the TaskScheduler class, and the one most often used, is based on the ThreadPool.  This can be retrieved via the TaskScheduler.Default property, and is, by default, what is used when we just start a Task instance with Task.Start(). Normally, when a Task is started by the default TaskScheduler, the task will be treated as a single work item, and run on a ThreadPool thread.  This pools tasks, and provides Task instances all of the advantages of the ThreadPool, including thread pooling for reduced resource usage, and an upper cap on the number of work items.  In addition, .NET 4 brings us a much improved thread pool, providing work stealing and reduced locking within the thread pool queues.  By using the default TaskScheduler, our Tasks are run asynchronously on the ThreadPool. There is one notable exception to my above statements when using the default TaskScheduler.  If a Task is created with the TaskCreationOptions set to TaskCreationOptions.LongRunning, the default TaskScheduler will generate a new thread for that Task, at least in the current implementation.  This is useful for Tasks which will persist for most of the lifetime of your application, since it prevents your Task from starving the ThreadPool of one of it’s work threads. The Task Parallel Library provides one other implementation of the TaskScheduler class.  In addition to providing a way to schedule tasks on the ThreadPool, the framework allows you to create a TaskScheduler which works within a specified SynchronizationContext.  This scheduler can be retrieved within a thread that provides a valid SynchronizationContext by calling the TaskScheduler.FromCurrentSynchronizationContext() method. This implementation of TaskScheduler is intended for use with user interface development.  Windows Forms and Windows Presentation Foundation both require any access to user interface controls to occur on the same thread that created the control.  For example, if you want to set the text within a Windows Forms TextBox, and you’re working on a background thread, that UI call must be marshaled back onto the UI thread.  The most common way this is handled depends on the framework being used.  In Windows Forms, Control.Invoke or Control.BeginInvoke is most often used.  In WPF, the equivelent calls are Dispatcher.Invoke or Dispatcher.BeginInvoke. As an example, say we’re working on a background thread, and we want to update a TextBlock in our user interface with a status label.  The code would typically look something like: // Within background thread work... string status = GetUpdatedStatus(); Dispatcher.BeginInvoke(DispatcherPriority.Normal, new Action( () => { statusLabel.Text = status; })); // Continue on in background method .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This works fine, but forces your method to take a dependency on WPF or Windows Forms.  There is an alternative option, however.  Both Windows Forms and WPF, when initialized, setup a SynchronizationContext in their thread, which is available on the UI thread via the SynchronizationContext.Current property.  This context is used by classes such as BackgroundWorker to marshal calls back onto the UI thread in a framework-agnostic manner. The Task Parallel Library provides the same functionality via the TaskScheduler.FromCurrentSynchronizationContext() method.  When setting up our Tasks, as long as we’re working on the UI thread, we can construct a TaskScheduler via: TaskScheduler uiScheduler = TaskScheduler.FromCurrentSynchronizationContext(); We then can use this scheduler on any thread to marshal data back onto the UI thread.  For example, our code above can then be rewritten as: string status = GetUpdatedStatus(); (new Task(() => { statusLabel.Text = status; })) .Start(uiScheduler); // Continue on in background method This is nice since it allows us to write code that isn’t tied to Windows Forms or WPF, but is still fully functional with those technologies.  I’ll discuss even more uses for the SynchronizationContext based TaskScheduler when I demonstrate task continuations, but even without continuations, this is a very useful construct. In addition to the two implementations provided by the Task Parallel Library, it is possible to implement your own TaskScheduler.  The ParallelExtensionsExtras project within the Samples for Parallel Programming provides nine sample TaskScheduler implementations.  These include schedulers which restrict the maximum number of concurrent tasks, run tasks on a single threaded apartment thread, use a new thread per task, and more.

    Read the article

  • Parallelism in .NET – Part 18, Task Continuations with Multiple Tasks

    - by Reed
    In my introduction to Task continuations I demonstrated how the Task class provides a more expressive alternative to traditional callbacks.  Task continuations provide a much cleaner syntax to traditional callbacks, but there are other reasons to switch to using continuations… Task continuations provide a clean syntax, and a very simple, elegant means of synchronizing asynchronous method results with the user interface.  In addition, continuations provide a very simple, elegant means of working with collections of tasks. Prior to .NET 4, working with multiple related asynchronous method calls was very tricky.  If, for example, we wanted to run two asynchronous operations, followed by a single method call which we wanted to run when the first two methods completed, we’d have to program all of the handling ourselves.  We would likely need to take some approach such as using a shared callback which synchronized against a common variable, or using a WaitHandle shared within the callbacks to allow one to wait for the second.  Although this could be accomplished easily enough, it requires manually placing this handling into every algorithm which requires this form of blocking.  This is error prone, difficult, and can easily lead to subtle bugs. Similar to how the Task class static methods providing a way to block until multiple tasks have completed, TaskFactory contains static methods which allow a continuation to be scheduled upon the completion of multiple tasks: TaskFactory.ContinueWhenAll. This allows you to easily specify a single delegate to run when a collection of tasks has completed.  For example, suppose we have a class which fetches data from the network.  This can be a long running operation, and potentially fail in certain situations, such as a server being down.  As a result, we have three separate servers which we will “query” for our information.  Now, suppose we want to grab data from all three servers, and verify that the results are the same from all three. With traditional asynchronous programming in .NET, this would require using three separate callbacks, and managing the synchronization between the various operations ourselves.  The Task and TaskFactory classes simplify this for us, allowing us to write: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAll( new[] {server1, server2, server3 }, (tasks) => { // Propogate exceptions (see below) Task.WaitAll(tasks); return this.CompareTaskResults( tasks[0].Result, tasks[1].Result, tasks[2].Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is clean, simple, and elegant.  The one complication is the Task.WaitAll(tasks); statement. Although the continuation will not complete until all three tasks (server1, server2, and server3) have completed, there is a potential snag.  If the networkClass.GetResults method fails, and raises an exception, we want to make sure to handle it cleanly.  By using Task.WaitAll, any exceptions raised within any of our original tasks will get wrapped into a single AggregateException by the WaitAll method, providing us a simplified means of handling the exceptions.  If we wait on the continuation, we can trap this AggregateException, and handle it cleanly.  Without this line, it’s possible that an exception could remain uncaught and unhandled by a task, which later might trigger a nasty UnobservedTaskException.  This would happen any time two of our original tasks failed. Just as we can schedule a continuation to occur when an entire collection of tasks has completed, we can just as easily setup a continuation to run when any single task within a collection completes.  If, for example, we didn’t need to compare the results of all three network locations, but only use one, we could still schedule three tasks.  We could then have our completion logic work on the first task which completed, and ignore the others.  This is done via TaskFactory.ContinueWhenAny: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAny( new[] {server1, server2, server3 }, (firstTask) => { return this.ProcessTaskResult(firstTask.Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, instead of working with all three tasks, we’re just using the first task which finishes.  This is very useful, as it allows us to easily work with results of multiple operations, and “throw away” the others.  However, you must take care when using ContinueWhenAny to properly handle exceptions.  At some point, you should always wait on each task (or use the Task.Result property) in order to propogate any exceptions raised from within the task.  Failing to do so can lead to an UnobservedTaskException.

    Read the article

  • MSBuild (.NET 4.0) access problems

    - by JMP
    I'm using Cruise Control .NET as my build server (Windows 2008 Server). Yesterday I upgraded my ASP.NET MVC project from VS 2008/.NET 3.5 to VS 2010/.NET 4.0. The only change I made to my ccnet.config's MSBuild task was the location of MSBuild.exe. Ever since I made that change, the build has been broken with the error: MSB4019 - The imported project "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the declaration is correct, and that the file exists on disk. This file does, in fact, exist in the location specified (I solved a problem similar to this when setting up the build server for VS2008/.NET 3.5 by copying the files from my dev environment to my build environment). So I RDP'ed into the build machine and opened a command prompt, used MSBUILD to attempt to build my project. MSBUILD returns the error: MSB3021 - Unable to copy file "obj\debug....dll". Access to the path 'bin....dll' is denied. Since I'm running MSBUILD from the command prompt, logged in with an account that has administrative privileges, I'm assuming that MSBUILD is running with the same privileges that I have. Next, I tried to copy the file that MSBUILD was attempting to copy. In this case, I get the UAC dialog that makes me click the [Continue] button to complete the copy. I'd like to avoid installing Visual Studio 2010 on my build machine, can anyone suggest other fixes I might try?

    Read the article

  • Error Running MVC2 application in IIS on .NET 4.0

    - by Matt Wrock
    I recently installed the RTM version of 4.0. I now receive an error when running MVC2 websites in a .net 4 app pool. The error is "User is not available in this context." All works fine on .net 2.0 app pools or if I run the app within the VS10 web server. The error only occurs in IIS on .net 4.0. To verify that it was not something specific to my app, I created a new MVC test app from the VS template and even that app encounters this error. My next step is to reinstall .net 4.0. Has anyone else seen this error?

    Read the article

  • Visual Studio 2010 RC with .net 4 beta 2

    - by aip.cd.aish
    Does anyone know if it is possible to use Visual Studio 2010 RC with the beta 2 version of the .NET 4 framework? The reason I need to use the beta 2 version and not the RC is that there isn't an Expression Blend that can support the .NET 4 RC. I uninstalled the .NET 4 framework that installed with Visual Studio 2010, then I reinstalled the .NET 4 version Beta 2. But now when I launch Visual Studio, I get an error message saying "The operation could not be completed" and it shuts down. How can I make this work? Thanks!

    Read the article

  • ASP.NET MVC, Spring.NET, NHibernate initial setup/example/tutorial.

    - by Bubba88
    Hello! Have you been doing some ASP.NET MVC developement involving Spring.NET and NHibernate both? I would like to see an informative example of such setup, so I could build my own project off that. I tried googling, found some pretty things like S#arp Architecture, an article about regular ASP.NET (WebForms) integrated with the frameworks and so on. Still, I'm missing a good tutorial on ASP.NET MVC & the subj. P.S.: I do know how Spring and Hibernate works, I just need to plug them into an MVC application. Don't want to use S#arp Architecture by now. P.P.S: I'll update the links later, including this one:

    Read the article

  • ASP.Net MVC 2 - Need To Add A Default Property To A Strongly Typed Html.Textbox Helper In Asp.Net MV

    - by Sara
    I'm having a problem with something that I'm sure is very simple. I have been using Asp.Net MVC and I decided to start using Asp.Net MVC 2. Something has changed and now I need a little help. The strongly typed helpers are now written like this - <%= Html.TextBoxFor(model => model.State) %> I need to add a default value to a textbox. In the prior version of Asp.Net MVC it was easy to assign a default value. I thought doing the following would work in MVC 2- <%= Html.TextBoxFor(model => model.CountyId, new{ value = 840 })%> This, however, does not work for me in Asp.Net MVC 2. The value is still blank for the textbox. I want to make sure that this isn't some random error that I am having. Has anyone else encountered the same problem? I have searched and searched to find more information on the default property for the html helpers in MVC 2, but I can't find anything. Does anyone out there know how to correctly assign a default value to a textbox in Asp.Net MVC 2?

    Read the article

  • HtmlForm.Action and .Net Framework 2.0/3.5 Query

    - by Brian
    Disappointingly, the members page for HtmlForm 2.0 is missing... My research seems to indicate that HtmlForm.Action is a property that was added in .Net Framework 3.5. However, I'm using VS2005 and my reference to System.Web (the namespace HtmlForm is under) is to a .Net Framework 2.0 runtime version. Further, my IIS status information also indicates I am using .Net Framework 2.0, when I force an error on my local IIS and read it. Despite this, I am able to use form1.Action successfully...but only on my local IIS. When I try it on vms and external servers, I get [MissingMethodException: Method not found: 'System.String System.Web.UI.HtmlControls.HtmlForm.get_Action()'.] errors. So, my question: 1) Why does it work on my local IIS? Does the fact that I have the 3.5 framework installed make a difference, here? 2) Why does it not work on other IIS? (I think this is because it's not part of .Net 2.0). I guess I just figure that if something is running on .Net Framework 2.0, the presence of 3.5 should not make a difference. Or maybe there's some other cause for these results.

    Read the article

  • how to get menu item text using vc++?

    - by pasham
    My problem is "how to know which menu item is clicked in visual studio 2005". i wrote some code using hook for monitoring WM_MENUSELECT..it is working fine for notepad,visual c++6.0 applications but when i use this code for VS-2005 it is not woking(these type of msgs are not generating when i click menuitem in VS2005).. is there any other way to achive this... please help me on this..i am really getting irritating becoz i am struggling from last one month... any help is greatly appreciated...

    Read the article

  • How to access GMT time using VC

    - by sijith
    In my project i am using GetLocalTime() and GetSystemTime and set the current time into registry. But my problem is when i am changing the time of my machine the changed time only saving to registry. Is there any chance to access the GMT time so that its independent of machine and nobody can change the time.. Please give some help

    Read the article

  • ASP.NET custom templates, still ASP.NET controls possible?

    - by Sha Le
    Hello: we currently do not use asp.net controls (no web forms). The way we do is: 1 Read HTML file from disk 2 lookup database, parse tags and populate data finally, Response.Write(page.ToString()); here there is no possibility of using asp.net controls. What I am wondering is, if we use asp.net controls in those HTML files, is there way to process them during step 2? Thanks and appreciate your response.

    Read the article

  • Using ExtJS with ASP.NET, Webforms or MVC?

    - by TigrouMeow
    Hello, For a scenario using 0 ASP.NET controls at all but rather an 100% extJS interface, what would be the advantages of using ASP.NET MVC or ASP.NET WebForms? And the disadvantages? Is there a OBVIOUS way to do it properly? I would love to have feedback's on your experiences. Thank you!

    Read the article

  • Recommend ASP.NET 3.5 SP1 Hosting Providers

    - by tyndall
    Would like to see a list of affordable ASP.NET 3.5 SP1 Hosting providers build up. Along with your review of the service, lacking features, special features, etc... Discount ASP.NET MochaHost At last update MochaHost does not offer SP1  they now offer SP1 CrystalTech Gearhost HostMySite please add more update: Anybody see a better deal for shared hosting ASP.NET than ASP.NETpro From GearHost? I would like to see more SQL storage, but I need keep the multiple domain capabilities. For about the same price.

    Read the article

  • Linq To Sql or classic ADO.net?

    - by Spyros
    I am asking my self many times before start writting a new app or data access library , should I use LinqToSql or classic ADO.net , I have used both and the development time I spend on building an app with Linq To sql is like the 1/3 compared to ADO.net. The only think I like using Linq to sql is that I dont have to design the domain objects Linq does that for me and saves me from spend my time on boring things :P But is Linq to sql suitable for large scale projects , is there an overhead that we can avoid when using ADO.net ?

    Read the article

  • asp.net application install folder

    - by Maximilian Csuk
    Disclaimer: this is not a question about how to install asp.net or an application using it! Hi! I am pretty sure many of you have once installed some kind of forum, blog or CMS (mostly PHP powered applications). All of these contain a folder mostly named "install" where (after you copied the files to the webserver) point your browser to to complete the installation by entering for example database information (servername, username, password, ...). After that, most applications suggest that you delete this folder or at least change the permissions so nobody from the outside can access it anymore. Now to my question: how would you go about that in the asp.net world? I don't really like the "install folder"-approach and I thought there might be a different mechanism for .net/IIS. The person installing my application should be able to enter his database information as painless as possible, which should ultimatively be stored in the web.config file. If it makes a difference, I am using asp.net MVC. Thanks for your help!

    Read the article

  • How can i get rid of 0xFEEFEE in VC

    - by egebilmuh
    Hi guys I m programming C for an assingment in VC++ 2008. I simulate adjList for graph implementation. i can readly add edge between two vertex and print the graph. and i want to remove edge between two vertex and print the graph again. whatever i do,i cant print the graph after deleting the edge. i get 0xfeefee :( what is this? and how can i resolve this program. my delete function and print the graph function are illustrated below. void deleteEdge(Graph G, Vertex V, Vertex W) { Edge list,prev,temp; list=V->list; prev=NULL; // while(list!=NULL && list->to->value!=W->value){ prev=list; list=list->next; } // have found the element. if(list!=NULL){ temp=list; // if first element of list is deleted. if(prev==NULL) list=list->next; else prev->next=list->next; // reallocate. free(temp); } } void GRAPHprint(Graph G) { Vertex tmp; Edge list; for(tmp = G->head;tmp!=NULL;tmp=tmp->next) { fprintf(stdout,"V:%d\t",tmp->value); list=tmp->list; while(list!=NULL) { fprintf(stdout,"%d\t",list->to->value); list=list->next; } fprintf(stdout, "\n"); } system("pause"); }

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >